X-Git-Url: http://git.grml.org/?a=blobdiff_plain;f=components%2F9990-misc-helpers.sh;h=1267a6709080bf4e1bafa91246480e51490c1c78;hb=a70800ee4b64f8566344587935642d55feb51777;hp=23024eb61d934ff266df6bec04e37c7e4b75e859;hpb=00b1535be06d4c045033a7f7b8a8226d44e40ded;p=live-boot-grml.git

diff --git a/components/9990-misc-helpers.sh b/components/9990-misc-helpers.sh
index 23024eb..1267a67 100755
--- a/components/9990-misc-helpers.sh
+++ b/components/9990-misc-helpers.sh
@@ -15,6 +15,42 @@ is_live_path()
 	return 1
 }
 
+grml_match_bootid()
+{
+	path="$1"
+
+	if [ -n "$IGNORE_BOOTID" ] ; then
+		echo " * Ignoring verification of bootid.txt as requested via ignore_bootid.">>/boot.log
+		return 0
+	fi
+
+	if [ -n "$BOOTID" ] && ! [ -r "${path}/conf/bootid.txt" ] ; then
+		echo "  * Warning: bootid=... specified but no bootid.txt found on currently requested device.">>/boot.log
+		return 1
+	fi
+
+	[ -r "${path}/conf/bootid.txt" ] || return 0
+
+	bootid_conf=$(cat "${path}/conf/bootid.txt")
+
+	if [ -z "$BOOTID" -a -z "$IGNORE_BOOTID" ]
+	then
+		echo " * Warning: bootid.txt found but ignore_bootid / bootid=.. bootoption missing...">>/boot.log
+		return 1
+	fi
+
+	if [ "$BOOTID" = "$bootid_conf" ]
+	then
+		echo " * Successfully verified /conf/bootid.txt from ISO, continuing... ">>/boot.log
+	else
+		echo " * Warning: BOOTID of ISO does not match. Retrying and continuing search...">>/boot.log
+		return 1
+	fi
+
+	return 0
+}
+
+
 matches_uuid ()
 {
 	if [ "${IGNORE_UUID}" ] || [ ! -e /conf/uuid.conf ]
@@ -103,7 +139,20 @@ check_dev ()
 	# support for fromiso=.../isofrom=....
 	if [ -n "$FROMISO" ]
 	then
-		ISO_DEVICE=$(dirname $FROMISO)
+		fs_type="${FROMISO%%:*}"
+		fs_type_auto='1'
+		ISO_DEVICE="${FROMISO}"
+		if echo "${fs_type}" | grep -q '[^[:alnum:]_-]'; then
+			# Not a valid file system name. Treat as part of the
+			# path, and, especially, use autodetection.
+			fs_type=''
+		else
+			# Looks like a file system specification, treat it
+			# like that.
+			fs_type_auto='0'
+			ISO_DEVICE="${ISO_DEVICE#*:}"
+		fi
+		ISO_DEVICE=$(dirname "${ISO_DEVICE}")
 		if ! [ -b $ISO_DEVICE ]
 		then
 			# to support unusual device names like /dev/cciss/c0d0p1
@@ -120,18 +169,52 @@ check_dev ()
 
 		if [ "$ISO_DEVICE" = "/" ]
 		then
-			echo "Warning: device for bootoption fromiso= ($FROMISO) not found.">>/boot.log
+			# not a block device, check if it's an iso file, for
+			# example an ISO when booting on an ONIE system
+			if echo "${FROMISO}" | grep -q "\.iso$"
+			then
+				if [ '0' -ne "${fs_type_auto}" ]; then
+					# Autodetect fs type if not overridden.
+					fs_type=$(get_fstype "${FROMISO}")
+				fi
+				if is_supported_fs ${fs_type}
+				then
+					mkdir /run/live/fromiso
+					mount -t "${fs_type}" -o 'ro' "${FROMISO}" '/run/live/fromiso'
+					if [ "$?" != 0 ]
+					then
+						echo "Warning: unable to mount ${FROMISO} (type ${fs_type})." >>/boot.log
+					fi
+					devname="/run/live/fromiso"
+				fi
+			else
+				echo "Warning: device for bootoption fromiso= ($FROMISO) not found.">>/boot.log
+			fi
 		else
-			fs_type=$(get_fstype "${ISO_DEVICE}")
+			# Need to extract actual ISO file path later on,
+			# initialize first.
+			iso_name="${FROMISO}"
+
+			if [ '0' -ne "${fs_type_auto}" ]; then
+				# Try to auto-detect file system if not
+				# explicitly provided.
+				fs_type=$(get_fstype "${ISO_DEVICE}")
+			else
+				# Delete file system type override.
+				iso_name="${iso_name#*:}"
+			fi
+			# At this point, the backing device should always be
+			# at the very front, so remove that - leaving only the
+			# ISO file path.
+			iso_name="$(echo "${iso_name}" | sed "s|^${ISO_DEVICE}||")"
 			if is_supported_fs ${fs_type}
 			then
 				mkdir /run/live/fromiso
-				mount -t $fs_type "$ISO_DEVICE" /run/live/fromiso
-				ISO_NAME="$(echo $FROMISO | sed "s|$ISO_DEVICE||")"
-				loopdevname=$(setup_loop "/run/live/fromiso/${ISO_NAME}" "loop" "/sys/block/loop*" "" '')
+				mount -t "${fs_type}" -o 'ro' "$ISO_DEVICE" '/run/live/fromiso'
+				loopdevname=$(setup_loop "/run/live/fromiso/${iso_name}" "loop" "/sys/block/loop*" "" '')
 				devname="${loopdevname}"
 			else
-				echo "Warning: unable to mount $ISO_DEVICE." >>/boot.log
+				echo "Warning: unable to mount $ISO_DEVICE (type ${fs_type})." >>/boot.log
 			fi
 		fi
 	fi
@@ -168,12 +251,13 @@ check_dev ()
 
 			/dev/md*)
 				# Adding raid support
-				if [ -x /scripts/local-top/mdadm ]
+				if [ -x /scripts/local-block/mdadm ]
 				then
-					[ -r /conf/conf.d/md ] && cp /conf/conf.d/md /conf/conf.d/md.orig
-					echo "MD_DEVS=$device " >> /conf/conf.d/md
-					/scripts/local-top/mdadm >>/boot.log
-					[ -r /conf/conf.d/md.orig ] && mv /conf/conf.d/md.orig /conf/conf.d/md
+					# Back in the day, when there was still a local-top mdadm script, we
+					# used to select specific devices to be auto-assembled.
+					# This functionality was dropped in the local-block script, so just
+					# scan and assemble all RAID devices.
+					/scripts/local-block/mdadm >>/boot.log
 				fi
 				;;
 		esac
@@ -242,7 +326,7 @@ check_dev ()
 		fi
 
 		if is_live_path ${mountpoint} && \
-			([ "${skip_uuid_check}" ] || matches_uuid ${mountpoint})
+			([ "${skip_uuid_check}" ] || grml_match_bootid ${mountpoint})
 		then
 			echo ${mountpoint}
 			return 0
@@ -338,19 +422,6 @@ find_livefs ()
 					return 0
 				fi
 			done
-		elif [ "${fstype}" = "squashfs" -o \
-			"${fstype}" = "btrfs" -o \
-			"${fstype}" = "ext2" -o \
-			"${fstype}" = "ext3" -o \
-			"${fstype}" = "ext4" -o \
-			"${fstype}" = "jffs2" ]
-		then
-			# This is an ugly hack situation, the block device has
-			# an image directly on it.  It's hopefully
-			# live-boot, so take it and run with it.
-			ln -s "${devname}" "${devname}.${fstype}"
-			echo "${devname}.${fstype}"
-			return 0
 		fi
 	done
 
@@ -455,6 +526,14 @@ is_supported_fs ()
 	fi
 
 	# Try to look if it is already supported by the kernel
+	# For ntfs, since user space program ntfs-3g will be used. Check ntfs-3g instead of kernel module.
+	if [ "${fstype}" = "ntfs" ]; then
+		if type ntfs-3g >/dev/null 2>&1; then
+			return 0
+		else
+			return 1
+		fi
+	fi
 	if grep -q ${fstype} /proc/filesystems
 	then
 		return 0
@@ -713,7 +792,7 @@ try_mount ()
 			fstype=$(get_fstype "${dev}")
 		fi
 		mount -t "${fstype}" -o "${opts}" "${dev}" "${mountp}" || \
-		( echo "SKIPPING: Cannot mount ${dev} on ${mountp}, fstype=${fstype}, options=${opts}" > boot.log && return 0 )
+		( echo "SKIPPING: Cannot mount ${dev} on ${mountp}, fstype=${fstype}, options=${opts}" >> boot.log && return 0 )
 	fi
 }
 
@@ -755,7 +834,7 @@ mount_persistence_media ()
 		then
 			mount_opts="ro,noatime"
 		fi
-		if mount -t "${fstype}" -o "${mount_opts}" "${device}" "${backing}" >/dev/null
+		if mount -t "${fstype}" -o "${mount_opts}" "${device}" "${backing}" >/dev/null 2>&1
 		then
 			echo ${backing}
 			return 0
@@ -1358,8 +1437,8 @@ do_union ()
 			# + a workdir to become mounted
 			# + workdir and upperdir to reside under the same mount
 			# + workdir and upperdir to be in separate directories
-			mkdir "${unionrw}/rw"
-			mkdir "${unionrw}/work"
+			mkdir -p "${unionrw}/rw"
+			mkdir -p "${unionrw}/work"
 			unionmountopts="-o noatime,lowerdir=${unionro},upperdir=${unionrw}/rw,workdir=${unionrw}/work"
 			;;
 	esac