X-Git-Url: http://git.grml.org/?a=blobdiff_plain;f=components%2F9990-misc-helpers.sh;h=f3e4d72346615acbd87a8c9e974473e9e4e71fc9;hb=202dc5012543bcfcc6b535b90ca1c652241f7eb2;hp=f845ed8b836323ec5fb79754593bfacf47b52a76;hpb=70caceefa69fcb0388c4d91a6f8e719a07893358;p=live-boot-grml.git

diff --git a/components/9990-misc-helpers.sh b/components/9990-misc-helpers.sh
index f845ed8..f3e4d72 100755
--- a/components/9990-misc-helpers.sh
+++ b/components/9990-misc-helpers.sh
@@ -15,6 +15,42 @@ is_live_path()
 	return 1
 }
 
+grml_match_bootid()
+{
+	path="$1"
+
+	if [ -n "$IGNORE_BOOTID" ] ; then
+		echo " * Ignoring verification of bootid.txt as requested via ignore_bootid.">>/boot.log
+		return 0
+	fi
+
+	if [ -n "$BOOTID" ] && ! [ -r "${path}/conf/bootid.txt" ] ; then
+		echo "  * Warning: bootid=... specified but no bootid.txt found on currently requested device.">>/boot.log
+		return 1
+	fi
+
+	[ -r "${path}/conf/bootid.txt" ] || return 0
+
+	bootid_conf=$(cat "${path}/conf/bootid.txt")
+
+	if [ -z "$BOOTID" -a -z "$IGNORE_BOOTID" ]
+	then
+		echo " * Warning: bootid.txt found but ignore_bootid / bootid=.. bootoption missing...">>/boot.log
+		return 1
+	fi
+
+	if [ "$BOOTID" = "$bootid_conf" ]
+	then
+		echo " * Successfully verified /conf/bootid.txt from ISO, continuing... ">>/boot.log
+	else
+		echo " * Warning: BOOTID of ISO does not match. Retrying and continuing search...">>/boot.log
+		return 1
+	fi
+
+	return 0
+}
+
+
 matches_uuid ()
 {
 	if [ "${IGNORE_UUID}" ] || [ ! -e /conf/uuid.conf ]
@@ -114,7 +150,7 @@ check_dev ()
 				ISO_DEVICE=$(dirname ${ISO_DEVICE})
 				[ -b "$ISO_DEVICE" ] && break
 				i=$(($i -1))
-		        done
+			done
 		fi
 
 		if [ "$ISO_DEVICE" = "/" ]
@@ -214,7 +250,7 @@ check_dev ()
 		fi
 
 		if is_live_path ${mountpoint} && \
-			([ "${skip_uuid_check}" ] || matches_uuid ${mountpoint})
+			([ "${skip_uuid_check}" ] || grml_match_bootid ${mountpoint})
 		then
 			echo ${mountpoint}
 			return 0
@@ -310,19 +346,6 @@ find_livefs ()
 					return 0
 				fi
 			done
-		elif [ "${fstype}" = "squashfs" -o \
-			"${fstype}" = "btrfs" -o \
-			"${fstype}" = "ext2" -o \
-			"${fstype}" = "ext3" -o \
-			"${fstype}" = "ext4" -o \
-			"${fstype}" = "jffs2" ]
-		then
-			# This is an ugly hack situation, the block device has
-			# an image directly on it.  It's hopefully
-			# live-boot, so take it and run with it.
-			ln -s "${devname}" "${devname}.${fstype}"
-			echo "${devname}.${fstype}"
-			return 0
 		fi
 	done
 
@@ -420,13 +443,19 @@ is_supported_fs ()
 		return 1
 	fi
 
+	# get_fstype might report "unknown" or "swap", ignore it as no such kernel module exists
+	if [ "${fstype}" = "unknown" ] || [ "${fstype}" = "swap" ]
+	then
+		return 1
+	fi
+
 	# Try to look if it is already supported by the kernel
 	if grep -q ${fstype} /proc/filesystems
 	then
 		return 0
 	else
 		# Then try to add support for it the gentle way using the initramfs capabilities
-		modprobe ${fstype}
+		modprobe -q -b ${fstype}
 		if grep -q ${fstype} /proc/filesystems
 		then
 			return 0
@@ -449,7 +478,7 @@ is_supported_fs ()
 
 get_fstype ()
 {
-	/sbin/blkid -s TYPE -o value $1 2>/dev/null
+	blkid -s TYPE -o value $1 2>/dev/null
 }
 
 where_is_mounted ()
@@ -507,7 +536,7 @@ base_path ()
 {
 	testpath="${1}"
 	mounts="$(awk '{print $2}' /proc/mounts)"
-	testpath="$(busybox realpath ${testpath})"
+	testpath="$(realpath ${testpath})"
 
 	while true
 	do
@@ -625,7 +654,7 @@ setup_loop ()
 					echo "${passphrase}" > /tmp/passphrase
 					unset passphrase
 					exec 9</tmp/passphrase
-					/sbin/losetup ${options} -e "${encryption}" -p 9 "${dev}" "${fspath}"
+					losetup ${options} -e "${encryption}" -p 9 "${dev}" "${fspath}"
 					error=${?}
 					exec 9<&-
 					rm -f /tmp/passphrase
@@ -732,7 +761,7 @@ mount_persistence_media ()
 		fi
 	elif [ "${backing}" != "${old_backing}" ]
 	then
-		if ! mount --move ${old_backing} ${backing} >/dev/null
+		if ! mount -o move ${old_backing} ${backing} >/dev/null
 		then
 			[ -z "${probe}" ] && log_warning_msg "Failed to move persistence media ${device}"
 			rmdir "${backing}"
@@ -772,7 +801,7 @@ close_persistence_media ()
 
 	if is_active_luks_mapping ${device}
 	then
-		/sbin/cryptsetup luksClose ${device}
+		cryptsetup luksClose ${device}
 	fi
 }
 
@@ -786,7 +815,7 @@ open_luks_device ()
 		opts="${opts} --readonly"
 	fi
 
-	if /sbin/cryptsetup status "${name}" >/dev/null 2>&1
+	if cryptsetup status "${name}" >/dev/null 2>&1
 	then
 		re="^[[:space:]]*device:[[:space:]]*\([^[:space:]]*\)$"
 		opened_dev=$(cryptsetup status ${name} 2>/dev/null | grep "${re}" | sed "s|${re}|\1|")
@@ -827,7 +856,7 @@ open_luks_device ()
 	while true
 	do
 		$cryptkeyscript "$cryptkeyprompt" | \
-			/sbin/cryptsetup -T 1 luksOpen ${dev} ${name} ${opts}
+			cryptsetup -T 1 luksOpen ${dev} ${name} ${opts}
 
 		if [ 0 -eq ${?} ]
 		then
@@ -868,14 +897,14 @@ get_gpt_name ()
 {
     local dev
     dev="${1}"
-    /sbin/blkid -s PART_ENTRY_NAME -p -o value ${dev} 2>/dev/null
+    blkid -s PART_ENTRY_NAME -p -o value ${dev} 2>/dev/null
 }
 
 is_gpt_device ()
 {
     local dev
     dev="${1}"
-    [ "$(/sbin/blkid -s PART_ENTRY_SCHEME -p -o value ${dev} 2>/dev/null)" = "gpt" ]
+    [ "$(blkid -s PART_ENTRY_SCHEME -p -o value ${dev} 2>/dev/null)" = "gpt" ]
 }
 
 probe_for_gpt_name ()
@@ -915,7 +944,7 @@ probe_for_fs_label ()
 
 	for label in ${overlays}
 	do
-		if [ "$(/sbin/blkid -s LABEL -o value $dev 2>/dev/null)" = "${label}" ]
+		if [ "$(blkid -s LABEL -o value $dev 2>/dev/null)" = "${label}" ]
 		then
 			echo "${label}=${dev}"
 		fi
@@ -1074,18 +1103,18 @@ find_persistence_media ()
 			result=$(probe_for_file_name "${overlays}" ${dev})
 			if [ -n "${result}" ]
 			then
-			        local loopdevice
+				local loopdevice
 				loopdevice=${result##*=}
-			        if is_in_comma_sep_list luks ${PERSISTENCE_ENCRYPTION} && is_luks_partition ${loopdevice}
+				if is_in_comma_sep_list luks ${PERSISTENCE_ENCRYPTION} && is_luks_partition ${loopdevice}
 				then
-				        local luksfile
+					local luksfile
 					luksfile=""
 					if luksfile=$(open_luks_device "${loopdevice}")
 					then
-					        result=${result%%=*}
+						result=${result%%=*}
 						result="${result}=${luksfile}"
 					else
-					        losetup -d $loopdevice
+						losetup -d $loopdevice
 						result=""
 					fi
 				fi
@@ -1108,7 +1137,7 @@ find_persistence_media ()
 		# Close luks device if it isn't used
 		if [ -z "${result}" ] && [ -n "${luks_device}" ] && is_active_luks_mapping "${luks_device}"
 		then
-			/sbin/cryptsetup luksClose "${luks_device}"
+			cryptsetup luksClose "${luks_device}"
 		fi
 	done
 
@@ -1139,13 +1168,13 @@ get_mac ()
 is_luks_partition ()
 {
 	device="${1}"
-	/sbin/cryptsetup isLuks "${device}" 1>/dev/null 2>&1
+	cryptsetup isLuks "${device}" 1>/dev/null 2>&1
 }
 
 is_active_luks_mapping ()
 {
 	device="${1}"
-	/sbin/cryptsetup status "${device}" 1>/dev/null 2>&1
+	cryptsetup status "${device}" 1>/dev/null 2>&1
 }
 
 get_luks_backing_device ()
@@ -1292,23 +1321,8 @@ do_union ()
 			rw_opt="rw"
 			ro_opt="rr+wh"
 			noxino_opt="noxino"
-			;;
 
-		unionfs-fuse)
-			rw_opt="RW"
-			ro_opt="RO"
-			;;
-
-		*)
-			rw_opt="rw"
-			ro_opt="ro"
-			;;
-	esac
-
-	case "${UNIONTYPE}" in
-		unionfs-fuse)
-			unionmountopts="-o cow -o noinitgroups -o default_permissions -o allow_other -o use_ino -o suid"
-			unionmountopts="${unionmountopts} ${unionrw}=${rw_opt}"
+			unionmountopts="-o noatime,${noxino_opt},dirs=${unionrw}=${rw_opt}"
 			if [ -n "${unionro}" ]
 			then
 				for rofs in ${unionro}
@@ -1316,38 +1330,28 @@ do_union ()
 					unionmountopts="${unionmountopts}:${rofs}=${ro_opt}"
 				done
 			fi
-			( sysctl -w fs.file-max=391524 ; ulimit -HSn 16384
-			unionfs-fuse ${unionmountopts} "${unionmountpoint}" ) && \
-			( mkdir -p /run/sendsigs.omit.d
-			pidof unionfs-fuse >> /run/sendsigs.omit.d/unionfs-fuse || true )
 			;;
 
-		overlayfs)
-			# XXX: can multiple unionro be used? (overlayfs only handles two dirs, but perhaps they can be chained?)
-			# XXX: and can unionro be optional? i.e. can overlayfs skip lowerdir?
-			if echo ${unionro} | grep -q " "
+		overlay)
+			# XXX: can unionro be optional? i.e. can overlay skip lowerdir?
+			if [ -z "${unionro}" ]
 			then
-				panic "Multiple lower filesystems are currently not supported with overlayfs (unionro = ${unionro})."
-			elif [ -z "${unionro}"	]
-			then
-				panic "Overlayfs needs at least one lower filesystem (read-only branch)."
+				panic "overlay needs at least one lower filesystem (read-only branch)."
 			fi
-			unionmountopts="-o noatime,lowerdir=${unionro},upperdir=${unionrw}"
-			mount -t ${UNIONTYPE} ${unionmountopts} ${UNIONTYPE} "${unionmountpoint}"
-			;;
-
-		*)
-			unionmountopts="-o noatime,${noxino_opt},dirs=${unionrw}=${rw_opt}"
-			if [ -n "${unionro}" ]
-			then
-				for rofs in ${unionro}
-				do
-					unionmountopts="${unionmountopts}:${rofs}=${ro_opt}"
-				done
-			fi
-			mount -t ${UNIONTYPE} ${unionmountopts} ${UNIONTYPE} "${unionmountpoint}"
+			# Multiple lower layers can now be given using the the colon (":") as a
+			# separator character between the directory names.
+			unionro="$(echo ${unionro} | sed -e 's| |:|g')"
+			# overlayfs requires:
+			# + a workdir to become mounted
+			# + workdir and upperdir to reside under the same mount
+			# + workdir and upperdir to be in separate directories
+			mkdir "${unionrw}/rw"
+			mkdir "${unionrw}/work"
+			unionmountopts="-o noatime,lowerdir=${unionro},upperdir=${unionrw}/rw,workdir=${unionrw}/work"
 			;;
 	esac
+
+	mount -t ${UNIONTYPE} ${unionmountopts} ${UNIONTYPE} "${unionmountpoint}"
 }
 
 get_custom_mounts ()
@@ -1609,7 +1613,7 @@ activate_custom_mounts ()
 			do_union ${dest} ${source} ${rootfs_dest_backing}
 		elif [ -n "${opt_bind}" ] && [ -z "${PERSISTENCE_READONLY}" ]
 		then
-			mount --bind "${source}" "${dest}"
+			mount -o bind "${source}" "${dest}"
 		elif [ -n "${opt_bind}" -o -n "${opt_union}" ] && [ -n "${PERSISTENCE_READONLY}" ]
 		then
 			# bind-mount and union mount are handled the same