X-Git-Url: http://git.grml.org/?a=blobdiff_plain;f=debian%2Fpatches%2F27_support_static_ip.patch;h=77bec78dc9a3e3850bbd0f149faa3cf8b4f59046;hb=14f658f90367f29d20e4fed7ad3a228994057e58;hp=0bef1cbf1fecad9fddf30745e7ce0b553a2873a4;hpb=6d32dfe093885e3a10150ecc986501d7cb1c7d01;p=live-boot-grml.git

diff --git a/debian/patches/27_support_static_ip.patch b/debian/patches/27_support_static_ip.patch
index 0bef1cb..77bec78 100644
--- a/debian/patches/27_support_static_ip.patch
+++ b/debian/patches/27_support_static_ip.patch
@@ -6,10 +6,21 @@
 
 @DPATCH@
 
---- a/scripts/live
-+++ b/scripts/live
-@@ -294,6 +294,24 @@
- 	return 0
+Index: live-boot-grml/components/9990-networking.sh
+===================================================================
+--- live-boot-grml.orig/components/9990-networking.sh	2014-03-08 13:35:17.832580835 +0100
++++ live-boot-grml/components/9990-networking.sh	2014-03-08 13:35:33.106789237 +0100
+@@ -44,7 +44,7 @@
+ 
+ 				if [ "$bootif_mac" = "$current_mac" ]
+ 				then
+-					DEVICE=${device##*/}
++					ETHDEVICE="${device##*/},$ETHDEVICE" # use ethdevice
+ 					break
+ 				fi
+ 			fi
+@@ -52,6 +52,24 @@
+ 	fi
  }
  
 +get_ipconfig_para()
@@ -33,12 +44,11 @@
  do_netsetup ()
  {
  	modprobe -q af_packet # For DHCP
-@@ -304,9 +322,19 @@
+@@ -62,8 +80,20 @@
  	[ -n "$ETHDEV_TIMEOUT" ] || ETHDEV_TIMEOUT=15
  	echo "Using timeout of $ETHDEV_TIMEOUT seconds for network configuration."
  
--	if [ -z "${NETBOOT}" ] && [ -z "${FETCH}" ] && \
--	   [ -z "${HTTPFS}" ] && [ -z "${FTPFS}" ]
+-	if [ -z "${NETBOOT}" ] && [ -z "${FETCH}" ] && [ -z "${HTTPFS}" ] && [ -z "${FTPFS}" ]
 -	then
 +	# Our modus operandi for getting a working network setup is this:
 +	# * If ip=* is set, pass that to ipconfig and be done
@@ -53,106 +63,105 @@
 +	for device in ${ALLDEVICES}; do
 +		ipconfig -c none -d $device -t 1 2>/dev/null >/dev/null
 +	done
++
+ 		# See if we can select the device from BOOTIF
+ 		Device_from_bootif
  
+@@ -73,14 +103,7 @@
+ 		if [ -z "$ETHDEVICE" ]
+ 		then
+ 			echo "If you want to boot from a specific device use bootoption ethdevice=..."
+-			for device in /sys/class/net/*
+-			do
+-				dev=${device##*/}
+-				if [ "$dev" != "lo" ]
+-				then
+-					ETHDEVICE="$ETHDEVICE $dev"
+-				fi
+-			done
++			ETHDEVICE="$ALLDEVICES"
+ 		fi
  
- 	# support for Syslinux IPAPPEND parameter
-@@ -349,7 +377,7 @@
+ 		# split args of ethdevice=eth0,eth1 into "eth0 eth1"
+@@ -89,42 +112,29 @@
+ 			devlist="$devlist $device"
+ 		done
  
- 				if [ "$bootif_mac" = "$current_mac" ]
- 				then
--					DEVICE=${device##*/}
-+					ETHDEVICE="${device##*/},$ETHDEVICE" # use ethdevice
- 					break
- 				fi
+-		# this is tricky (and ugly) because ipconfig sometimes just hangs/runs into
+-		# an endless loop; if execution fails give it two further tries, that's
+-		# why we use '$devlist $devlist $devlist' for the other for loop
+-		for dev in $devlist $devlist $devlist
+-		do
+-			echo "Executing ipconfig -t $ETHDEV_TIMEOUT $dev"
+-			ipconfig -t "$ETHDEV_TIMEOUT" $dev | tee -a /netboot.config &
+-			jobid=$!
+-			sleep "$ETHDEV_TIMEOUT" ; sleep 1
+-			if [ -r /proc/"$jobid"/status ]
+-			then
+-				echo "Killing job $jobid for device $dev as ipconfig ran into recursion..."
+-				kill -9 $jobid
++		for dev in $devlist ; do
++			param="$(get_ipconfig_para $dev)"
++			if [ -n "$NODHCP" ] && [ "$param" = "$dev" ] ; then
++				echo "Ignoring network device $dev due to nodhcp." | tee -a /boot.log
++				continue
  			fi
-@@ -361,12 +389,7 @@
- 	# for *every* present network device (except for loopback of course)
- 	if [ -z "$ETHDEVICE" ] ; then
- 		echo "If you want to boot from a specific device use bootoption ethdevice=..."
--		for device in /sys/class/net/*; do
--			dev=${device##*/} ;
--			if [ "$dev" != "lo" ] ; then
--				ETHDEVICE="$ETHDEVICE $dev"
--			fi
--		done
-+        ETHDEVICE="$ALLDEVICES"
- 	fi
- 
- 	# split args of ethdevice=eth0,eth1 into "eth0 eth1"
-@@ -374,38 +397,29 @@
- 		devlist="$devlist $device"
- 	done
- 
--	# this is tricky (and ugly) because ipconfig sometimes just hangs/runs into
--	# an endless loop; iff execution fails give it two further tries, that's
--	# why we use '$devlist $devlist $devlist' for the other for loop
--	for dev in $devlist $devlist $devlist ; do
--		echo "Executing ipconfig -t $ETHDEV_TIMEOUT $dev"
--		ipconfig -t "$ETHDEV_TIMEOUT" $dev | tee -a /netboot.config &
--		jobid=$!
--		sleep "$ETHDEV_TIMEOUT" ; sleep 1
--		if [ -r /proc/"$jobid"/status ] ; then
--			echo "Killing job $jobid for device $dev as ipconfig ran into recursion..."
--			kill -9 $jobid
-+	for dev in $devlist ; do
-+		param="$(get_ipconfig_para $dev)"
-+		if [ -n "$NODHCP" ] && [ "$param" = "$dev" ] ; then
-+			echo "Ignoring network device $dev due to nodhcp." | tee -a /live-boot.log
-+			continue
- 		fi
-+		echo "Executing ipconfig -t $ETHDEV_TIMEOUT $param"
-+		ipconfig -t "$ETHDEV_TIMEOUT" "$param" | tee -a /netboot.config
- 
- 		# if configuration of device worked we should have an assigned
- 		# IP address, iff so let's use the according as $DEVICE for later usage
- 		# simple and primitive approach which seems to work fine
--		if ifconfig $dev | grep -q 'inet.*addr:' ; then
--			export DEVICE="$dev"
--			break
-+		IPV4ADDR="0.0.0.0"
-+		if [ -e "/tmp/net-${device}.conf" ]; then
-+			. /tmp/net-${device}.conf
-+		fi
-+		if [ "${IPV4ADDR}" != "0.0.0.0" ]; then
-+			export DEVICE="$dev $DEVICE"
-+			# break  # exit loop as we just use the irst
- 		fi
--	done
++			echo "Executing ipconfig -t $ETHDEV_TIMEOUT $param"
++			ipconfig -t "$ETHDEV_TIMEOUT" "$param" | tee -a /netboot.config
  
+ 			# if configuration of device worked we should have an assigned
+ 			# IP address, if so let's use the device as $DEVICE for later usage.
+ 			# simple and primitive approach which seems to work fine
+-			if ifconfig $dev | grep -q 'inet.*addr:'
+-			then
+-				export DEVICE="$dev"
+-				break
++
++			IPV4ADDR="0.0.0.0"
++			if [ -e "/run/net-${device}.conf" ]; then
++				. /run/net-${device}.conf
+ 			fi
+-		done
 -	else
 -		for interface in ${DEVICE}; do
 -			ipconfig -t "$ETHDEV_TIMEOUT" ${interface} | tee /netboot-${interface}.config
--			[ -e /tmp/net-${interface}.conf ] && . /tmp/net-${interface}.conf
+-
+-			[ -e /run/net-${interface}.conf ] && . /run/net-${interface}.conf
+-
 -			if [ "$IPV4ADDR" != "0.0.0.0" ]
 -			then
 -				break
--			fi
--		done
++			if [ "${IPV4ADDR}" != "0.0.0.0" ]; then
++				export DEVICE="$dev $DEVICE"
++				# break  # exit loop as we just use the irst
+ 			fi
+ 		done
 -	fi
-+	done
 +	unset devlist
  
- 	for interface in ${DEVICE}; do
- 		# source relevant ipconfig output
---- a/scripts/live-helpers
-+++ b/scripts/live-helpers
-@@ -93,9 +93,8 @@
+ 	for interface in ${DEVICE}
+ 	do
+Index: live-boot-grml/components/9990-cmdline-old
+===================================================================
+--- live-boot-grml.orig/components/9990-cmdline-old	2014-03-08 13:35:17.832580835 +0100
++++ live-boot-grml/components/9990-cmdline-old	2014-03-08 13:35:17.828581304 +0100
+@@ -51,9 +51,8 @@
  				;;
  
  			ethdevice=*)
--				DEVICE="${ARGUMENT#ethdevice=}"
+-				DEVICE="${_PARAMETER#ethdevice=}"
 -				ETHDEVICE="${DEVICE}"
 -				export DEVICE ETHDEVICE
-+				ETHDEVICE="${ARGUMENT#ethdevice=}"
++				ETHDEVICE="${_PARAMETER#ethdevice=}"
 +				export ETHDEVICE
  				;;
  
  			ethdevice-timeout=*)
-@@ -162,13 +161,9 @@
+@@ -110,13 +109,9 @@
  				;;
  
  			ip=*)
--				STATICIP="${ARGUMENT#ip=}"
+-				STATICIP="${_PARAMETER#ip=}"
 -
 -				if [ -z "${STATICIP}" ]
 -				then
@@ -161,7 +170,7 @@
 -
 +				# copy complete ip=args into staticip, and
 +				# keep multiple uses.
-+				STATICIP="${STATICIP} ${ARGUMENT}"
++				STATICIP="${STATICIP} ${_PARAMETER}"
  				export STATICIP
  				;;