X-Git-Url: http://git.grml.org/?a=blobdiff_plain;f=manpages%2Fde%2Flive-boot.de.7;h=77c95fb8f94748ffbfc4b3f19a5fde4866d6f858;hb=41783663be66248d98910e6fa41cec63695d3c0d;hp=9426cb87803b270530addf80b571e98f632abfc3;hpb=6c01f4c4938d114b9011db75a7006c724329f4c3;p=live-boot-grml.git

diff --git a/manpages/de/live-boot.de.7 b/manpages/de/live-boot.de.7
index 9426cb8..77c95fb 100644
--- a/manpages/de/live-boot.de.7
+++ b/manpages/de/live-boot.de.7
@@ -3,7 +3,7 @@
 .\" This file was generated with po4a. Translate the source file.
 .\"
 .\"*******************************************************************
-.TH LIVE\-BOOT 7 08.06.2010 2.0~a6 "Debian Live Projekt"
+.TH LIVE\-BOOT 7 15.07.2010 2.0~a13 "Debian Live Projekt"
 
 .SH NAME
 \fBlive\-boot\fP \- System Boot Skripte
@@ -92,6 +92,9 @@ Target <target\-name>
   Lun 0 Path=<path\-to\-your\-live\-image.iso>,Type=fileio,IOMode=ro
   # If you want to boot multiple machines you might want to look at tuning some parameters like
   # Wthreads or MaxConnections
+.IP \fBfromiso\fP=\fI/PATH/TO/IMAGE\fP 4
+Allows to use a filesystem from within an iso image that's available on
+live\-media.
 .IP \fBignore_uuid\fP 4
 Do not check that any UUID embedded in the initramfs matches the discovered
 medium. live\-boot may be told to generate a UUID by setting
@@ -158,10 +161,6 @@ has been installed with persistent enabled.
 Do not prompt to eject the CD or remove the USB flash drive on reboot.
 .IP \fBswapon\fP 4
 This parameter enables usage of local swap partitions.
-.IP \fBnoxautoconfig\fP 4
-This parameter disables Xorg auto\-reconfiguration at boot time. This is
-valuable if you either do the detection on your own, or, if you want to ship
-a custom, premade xorg.conf in your live system.
 .IP \fBpersistent\fP[=nofiles] 4
 live\-boot will look for persistent and snapshot partitions or files labeled
 "live\-rw", "home\-rw", and files called "live\-sn*", "home\-sn*" and will try
@@ -194,8 +193,6 @@ installation.
 .IP \fBsilent\fP 4
 If you boot with the normal quiet parameter, live\-boot hides most messages
 of its own. When adding silent, it hides all.
-.IP \fBtextonly\fP 4
-Start up to text\-mode shell prompts, disabling the graphical user interface.
 .IP \fBtodisk\fP=\fIDEVICE\fP 4
 Adding this parameter, live\-boot will try to copy the entire read\-only media
 to the specified device before mounting the root filesystem. It probably
@@ -207,14 +204,9 @@ Adding this parameter, live\-boot will try to copy the whole read\-only media
 to the computer's RAM before mounting the root filesystem. This could need a
 lot of ram, according to the space used by the read\-only media.
 .IP \fBunion\fP=aufs|unionfs 4
+.\" FIXME
 By default, live\-boot uses aufs. With this parameter, you can switch to
 unionfs.
-.IP \fBxdebconf\fP 4
-Uses xdebconfigurator, if present on the rootfs, to configure X instead of
-the standard procedure (experimental).
-.IP \fBxvideomode\fP=\fIRESOLUTION\fP 4
-.\" FIXME
-Doesn't do xorg autodetection, but enforces a given resolution.
 
 .\" FIXME
 .SH "FILES (old)"