X-Git-Url: http://git.grml.org/?a=blobdiff_plain;f=scripts%2Flive;h=3bb31c99c831899efb20ec79442ec820e856105e;hb=ae60f44dbaaa4c95681c6179ac10da31698e7ba0;hp=f79eaff2237d8415ec5d49cc7d6d9075518e0a44;hpb=1094f4ffce8c2d53c7200184ed42dc1bb15c867e;p=live-boot-grml.git

diff --git a/scripts/live b/scripts/live
index f79eaff..3bb31c9 100755
--- a/scripts/live
+++ b/scripts/live
@@ -20,6 +20,7 @@ USERFULLNAME="Live user"
 HOSTNAME="host"
 
 mkdir -p "${mountpoint}"
+tried="/tmp/tried"
 
 # Create /etc/mtab for debug purpose and future syncs
 if [ ! -d /etc ]
@@ -100,6 +101,16 @@ Arguments ()
 				export DEVICE
 				;;
 
+			ethdevice=*)
+				ETHDEVICE="${ARGUMENT#ethdevice=}"
+				export ETHDEVICE
+				;;
+
+			ethdevice-timeout=*)
+				ETHDEV_TIMEOUT="${ARGUMENT#ethdevice-timeout=}"
+				export ETHDEV_TIMEOUT
+				;;
+
 			fetch=*)
                                 FETCH="${ARGUMENT#fetch=}"
                                 export FETCH
@@ -655,7 +666,7 @@ is_nice_device ()
 {
 	sysfs_path="${1#/sys}"
 
-	if /lib/udev/path_id "${sysfs_path}" | grep -E -q "ID_PATH=(usb|pci-|platform-mmc)"
+	if /lib/udev/path_id "${sysfs_path}" | grep -E -q "ID_PATH=(usb|pci-|platform-orion-ehci|platform-mmc|platform-mxsdhci|)"
 	then
 		return 0
 	elif echo "${sysfs_path}" | grep -q '^/block/vd[a-z]$'
@@ -762,18 +773,51 @@ do_netmount ()
 
 	modprobe -q af_packet # For DHCP
 
-	if [ -x /sbin/udevadm ]
-	then
-		# lenny
-		udevadm trigger
-		udevadm settle
-	else
-		# etch
-		udevtrigger
-		udevsettle
+	udevadm trigger
+	udevadm settle
+
+	# if ethdevice was not specified on the kernel command line
+	# make sure we try to get a working network configuration
+	# for *every* present network device (except for loopback of course)
+	if [ -z "$ETHDEVICE" ] ; then
+		echo "If you want to boot from a specific device use bootoption ethdevice=..."
+		for device in /sys/class/net/*; do
+			dev=${device##*/} ;
+			if [ "$dev" != "lo" ] ; then
+				ETHDEVICE="$ETHDEVICE $dev"
+			fi
+		done
 	fi
 
-	ipconfig ${DEVICE} | tee /netboot.config
+	# split args of ethdevice=eth0,eth1 into "eth0 eth1"
+	for device in $(echo $ETHDEVICE | sed 's/,/ /g') ; do
+		devlist="$devlist $device"
+	done
+
+	[ -n "$ETHDEV_TIMEOUT" ] || ETHDEV_TIMEOUT=15
+	echo "Using timeout of $ETHDEV_TIMEOUT seconds for network configuration."
+
+	# this is tricky (and ugly) because ipconfig sometimes just hangs/runs into
+	# an endless loop; iff execution fails give it two further tries, that's
+	# why we use '$devlist $devlist $devlist' for the other for loop
+	for dev in $devlist $devlist $devlist ; do
+		echo "Executing ipconfig -t $ETHDEV_TIMEOUT $dev"
+		ipconfig -t "$ETHDEV_TIMEOUT" $dev | tee -a /netboot.config &
+		jobid=$!
+		sleep "$ETHDEV_TIMEOUT" ; sleep 1
+		if [ -r /proc/"$jobid"/status ] ; then
+			echo "Killing job $jobid for device $dev as ipconfig ran into recursion..."
+			kill -9 $jobid
+		fi
+
+		# if configuration of device worked we should have an assigned
+		# IP address, iff so let's use the according as $DEVICE for later usage
+		# simple and primitive approach which seems to work fine
+		if ifconfig $dev | grep -q 'inet.*addr:' ; then
+			export DEVICE="$dev"
+			break
+		fi
+	done
 
 	# source relevant ipconfig output
 	OLDHOSTNAME=${HOSTNAME}
@@ -782,7 +826,8 @@ do_netmount ()
 	export HOSTNAME
 
 	# Check if we have a network device at all
-	if ! ls /sys/class/net/eth0 > /dev/null 2>&1 && \
+	if ! ls /sys/class/net/"$DEVICE" > /dev/null 2>&1 && \
+	   ! ls /sys/class/net/eth0 > /dev/null 2>&1 && \
 	   ! ls /sys/class/net/wlan0 > /dev/null 2>&1 && \
 	   ! ls /sys/class/net/ath0 > /dev/null 2>&1 && \
 	   ! ls /sys/class/net/ra0 > /dev/null 2>&1
@@ -1037,14 +1082,23 @@ try_snap ()
 			RES=$?
 		else
 			# cpio.gz snapshot
-			cd "${snap_mount}"
-			zcat "${snapback}/${snapfile}" | /bin/cpio --extract --preserve-modification-time --no-absolute-filenames --sparse --unconditional --make-directories > /dev/null 2>&1
-			RES=$?
-			if [ "${RES}" != "0" ]
+
+			# Unfortunately klibc's cpio is incompatible with the
+			# rest of the world; everything else requires -u -d,
+			# while klibc doesn't implement them. Try to detect
+			# whether it's in use.
+			cpiopath="$(which cpio)" || true
+			if [ "$cpiopath" ] && grep -aq /lib/klibc "$cpiopath"
 			then
-				log_warning_msg "failure to \"zcat ${snapback}/${snapfile} | /bin/cpio --extract --preserve-modification-time --no-absolute-filenames --sparse --unconditional --make-directories\""
+				cpioargs=
+			else
+				cpioargs='--unconditional --make-directories'
+			fi
+
+			if ! (cd "${snap_mount}" && zcat "${snapback}/${snapfile}" | cpio $cpioargs --extract --preserve-modification-time --no-absolute-filenames --sparse 2>/dev/null)
+			then
+				log_warning_msg "failure to \"zcat ${snapback}/${snapfile} | cpio $cpioargs --extract --preserve-modification-time --no-absolute-filenames --sparse\""
 			fi
-			cd "${OLDPWD}"
 		fi
 
 		umount "${snapback}" ||  log_warning_msg "failure to \"umount ${snapback}\""
@@ -1085,7 +1139,7 @@ try_snap ()
 		return 1
 	fi
 
-	echo "export ${snap_type}SNAP="${snap_mount}":${snapdev}:${snapfile}" >> /etc/live.conf # for resync on reboot/halt
+	echo "export ${snap_type}SNAP="/cow${snap_mount#$rootmnt}":${snapdev}:${snapfile}" >> /etc/live.conf # for resync on reboot/halt
 	return 0
 }
 
@@ -1094,7 +1148,25 @@ setup_unionfs ()
 	image_directory="${1}"
 	rootmnt="${2}"
         addimage_directory="${3}"
-	modprobe -q -b ${UNIONTYPE}
+
+	case ${UNIONTYPE} in
+		aufs|unionfs)
+			modprobe -q -b ${UNIONTYPE}
+
+			if ! cut -f2 /proc/filesystems | grep -q "^${UNIONTYPE}\$" && [ -x /bin/unionfs-fuse ]
+			then
+				echo "${UNIONTYPE} not available, falling back to unionfs-fuse."
+				echo "This might be really slow."
+
+				UNIONTYPE="unionfs-fuse"
+			fi
+			;;
+	esac
+
+	if [ "${UNIONTYPE}" = unionfs-fuse ]
+	then
+		modprobe fuse
+	fi
 
 	# run-init can't deal with images in a subdir, but we're going to
 	# move all of these away before it runs anyway.  No, we're not,
@@ -1109,7 +1181,11 @@ setup_unionfs ()
 
 	if [ "${UNIONTYPE}" = "aufs" ]
 	then
-		roopt="rr,noxino"
+		roopt="rr"
+		noxino_opt="noxino,"
+	elif [ "${UNIONTYPE}" = "unionfs-fuse" ]
+	then
+		roopt="RO"
 	else
 		roopt="ro"
 	fi
@@ -1232,16 +1308,8 @@ setup_unionfs ()
 				modprobe -q -b ${module}
 			done
 
-			if [ -x /sbin/udevadm ]
-			then
-				# lenny
-				udevadm trigger
-				udevadm settle
-			else
-				# etch
-				udevtrigger
-				udevsettle
-			fi
+			udevadm trigger
+			udevadm settle
 
 			# For some reason, udevsettle does not block in this scenario,
 			# so we sleep for a little while.
@@ -1357,16 +1425,31 @@ setup_unionfs ()
 
 		for dir in ${cow_dirs}; do
 			mkdir -p /cow${dir}
-			mount -t ${UNIONTYPE} \
-				-o rw,noatime,dirs=/cow${dir}=rw:${exposedrootfs}${dir}=ro \
-				${UNIONTYPE} "${rootmnt}${dir}" || \
-				panic "mount ${UNIONTYPE} on ${rootmnt}${dir} failed with option \
-					rw,noatime,dirs=/cow${dir}=rw:${exposedrootfs}${dir}=ro"
+
+			case "${UNIONTYPE}" in
+				unionfs-fuse)
+					(ulimit -n 16384; unionfs-fuse -o cow -o noinitgroups -o default_permissions -o allow_other -o use_ino -o suid /cow=RW:${exposedrootfs}${dir} "${rootmnt}${dir}" || panic "mount ${UNIONTYPE} on ${rootmnt}${dir} failed with option cow,noinitgroups,default_permissions,allow_other,use_ino,suid=/cow=RW:${exposedrootfs}${dir}")
+					mkdir -p /dev/.initramfs/varrun
+					pidof unionfs-fuse >> /dev/.initramfs/varrun/sendsigs.omit || true
+					;;
+
+				*)
+					mount -t ${UNIONTYPE} -o rw,noatime,dirs=/cow${dir}=rw:${exposedrootfs}${dir}=ro ${UNIONTYPE} "${rootmnt}${dir}" || panic "mount ${UNIONTYPE} on ${rootmnt}${dir} failed with option rw,noatime,dirs=/cow${dir}=rw:${exposedrootfs}${dir}=ro"
+					;;
+			esac
 		done
 	else
-		mount -t ${UNIONTYPE} -o noatime,dirs=/cow=rw:${rofsstring} \
-			${UNIONTYPE} "${rootmnt}" || panic "mount ${UNIONTYPE} on \
-			${rootmnt} failed with option noatime,dirs=/cow=rw:${rofsstring}"
+		case "${UNIONTYPE}" in
+			unionfs-fuse)
+				(ulimit -n 16384; unionfs-fuse -o cow -o noinitgroups -o default_permissions -o allow_other -o use_ino -o suid /cow=RW:${rofsstring} "${rootmnt}" || panic "mount ${UNIONTYPE} on ${rootmnt} failed with option cow,noinitgroups,default_permissions,allow_other,use_ino,suid=/cow:RW:${rofsstring}")
+				mkdir -p /dev/.initramfs/varrun
+				pidof unionfs-fuse >> /dev/.initramfs/varrun/sendsigs.omit || true
+				;;
+
+			*)
+				mount -t ${UNIONTYPE} -o noatime,${noxino_opt}dirs=/cow=rw:${rofsstring} ${UNIONTYPE} "${rootmnt}" || panic "mount ${UNIONTYPE} on ${rootmnt} failed with option noatime,${noxino_opt}dirs=/cow=rw:${rofsstring}"
+				;;
+		esac
 	fi
 
 	# Correct the permissions of /:
@@ -1409,7 +1492,15 @@ setup_unionfs ()
 					;;
 
 				*)
-					mount -o move "${d}" "${rootmnt}/live/${d##*/}"
+					case "${UNIONTYPE}" in
+						unionfs-fuse)
+							mount -o bind "${d}" "${rootmnt}/live/${d##*/}"
+							;;
+
+						*)
+							mount -o move "${d}" "${rootmnt}/live/${d##*/}"
+							;;
+					esac
 					;;
 			esac
 		done
@@ -1429,12 +1520,31 @@ check_dev ()
 	# support for fromiso=.../isofrom=....
 	if [ -n "$FROMISO" ]
 	then
-		mkdir /isofrom
-		ISO_DEVICE="$(echo $FROMISO | sed 's|\(/dev/[a-z]*[0-9]*\).*|\1|')"
-		mount "$ISO_DEVICE" /isofrom
-		ISO_NAME="$(echo $FROMISO | sed 's|/dev/[a-z]*[0-9]*/||')"
-		loopdevname=$(setup_loop "/isofrom/${ISO_NAME}" "loop" "/sys/block/loop*" "" '')
-		devname="${loopdevname}"
+		ISO_DEVICE=$(dirname $FROMISO)
+		if ! [ -b $ISO_DEVICE ]
+		then
+			# to support unusual device names like /dev/cciss/c0d0p1
+			# as well we have to identify the block device name, let's
+			# do that for up to 15 levels
+			i=15
+			while [ -n "$ISO_DEVICE" ] && [ "$i" -gt 0 ]
+			do
+				ISO_DEVICE=$(dirname ${ISO_DEVICE})
+				[ -b "$ISO_DEVICE" ] && break
+				i=$(($i -1))
+		        done
+		fi
+
+		if [ "$ISO_DEVICE" = "/" ]
+		then
+			echo "Warning: device for bootoption isofrom= ($FROMISO) not found.">>/live.log
+		else
+			mkdir /isofrom
+			mount "$ISO_DEVICE" /isofrom
+			ISO_NAME="$(echo $FROMISO | sed "s|$ISO_DEVICE||")"
+			loopdevname=$(setup_loop "/isofrom/${ISO_NAME}" "loop" "/sys/block/loop*" "" '')
+			devname="${loopdevname}"
+		fi
 	fi
 
 	if [ -z "${devname}" ]
@@ -1454,6 +1564,7 @@ check_dev ()
 			umount $mountpoint
 		fi
 	fi
+	[ -e "$devname" ] || continue
 
 	if [ -n "${LIVE_MEDIA_OFFSET}" ]
 	then
@@ -1465,7 +1576,10 @@ check_dev ()
 
 	if is_supported_fs ${fstype}
 	then
+		devuid=$(blkid -o value -s UUID "$devname")
+		[ -n "$devuid" ] && grep -qs "\<$devuid\>" $tried && continue
 		mount -t ${fstype} -o ro,noatime "${devname}" ${mountpoint} || continue
+		[ -n "$devuid" ] && echo "$devuid" >> $tried
 
 		if is_live_path ${mountpoint} && \
 			([ "${skip_uuid_check}" ] || matches_uuid ${mountpoint})
@@ -1550,9 +1664,22 @@ find_livefs ()
 	esac
 
 	# or do the scan of block devices
+	# prefer removable devices over non-removable devices, so scan them first
 	for sysblock in $(echo /sys/block/* | tr ' ' '\n' | grep -vE "/(loop|ram|dm-|fd)")
 	do
+		if [ "$(cat ${sysblock}/removable)" = "1" ]
+		then
+			removable_devices_to_scan="$removable_devices_to_scan $sysblock"
+		else
+			nonremovable_devices_to_scan="$nonremovable_devices_to_scan $sysblock"
+		fi
+	done
+	devices_to_scan="$removable_devices_to_scan $nonremovable_devices_to_scan"
+
+	for sysblock in $devices_to_scan
+	do
 		devname=$(sys2dev "${sysblock}")
+		[ -e "$devname" ] || continue
 		fstype=$(get_fstype "${devname}")
 
 		if /lib/udev/cdrom_id ${devname} > /dev/null
@@ -1730,14 +1857,30 @@ mountroot ()
 
 	log_end_msg
 
+	# unionfs-fuse needs /dev to be bind-mounted for the duration of
+	# live-bottom; udev's init script will take care of things after that
+	if [ "${UNIONTYPE}" = unionfs-fuse ]
+	then
+		mount -n -o bind /dev "${rootmnt}/dev"
+	fi
+
 	maybe_break live-bottom
 	log_begin_msg "Running /scripts/live-bottom\n"
 
 	run_scripts /scripts/live-bottom
 	log_end_msg
 
+	if [ "${UNIONFS}" = unionfs-fuse ]
+	then
+		umount "${rootmnt}/dev"
+	fi
+
 	exec 1>&6 6>&-
 	exec 2>&7 7>&-
 	kill ${tailpid}
 	[ -w "${rootmnt}/var/log/" ] && cp live.log "${rootmnt}/var/log/" 2>/dev/null
+	if [ -f /etc/live.conf ]
+	then
+		cp /etc/live.conf "${rootmnt}/etc/"
+	fi
 }