X-Git-Url: http://git.grml.org/?a=blobdiff_plain;f=templates%2FGRML%2Fgrml-cheatcodes.txt;h=df1fc2016e64b6e9b8c87648f412a1d7e3cc540d;hb=f76869eb1688654769e833dae472ac6eab2f5806;hp=37bfd0e7929b9e1a1c288a8dcace538e5cbb77c2;hpb=6bab839269f8533a42d954005349d45e53955f92;p=grml-live.git

diff --git a/templates/GRML/grml-cheatcodes.txt b/templates/GRML/grml-cheatcodes.txt
index 37bfd0e..df1fc20 100644
--- a/templates/GRML/grml-cheatcodes.txt
+++ b/templates/GRML/grml-cheatcodes.txt
@@ -61,6 +61,10 @@ grml distri=...                     Set distribution name to given argument. If
 				    (/cdrom/desktop/"$DISTRI") it will be taken as wallpaper for grml
 grml debnet                         Search through local partitions for file /etc/network/interfaces,
                                     copy /etc/network to local system and restart networking then
+grml mypath=...                     Add specified option into $PATH of Zsh.
+                                    For example when using "grml mypath=/foobar" then /foobar
+                                    will be added to the end of $PATH inside Zsh.
+grml noautoconfig                   Disable searching for device labeled GRMLCFG.
 
 Notice: Take a look at http://grml.org/config/ and /usr/share/doc/grml-saveconfig/grml-config.html
 for more information regarding the configuration framework of grml.
@@ -224,25 +228,25 @@ driver during that procedure.
 
 *) If your grml-CD makes strange noises during boot, or you see frequent
 errors like "squashfs: read error", or programs are crashing randomly,
-then your CD image is probably defective or incomplete, or your CD-burner
-created a defective CD due to wrong writing speed or bad media. This is
-the most common error reported.  Please boot with "grml testcd" to check
-if the CD is OK, and/or even better, verify the MD5 checksums that are
-present on the mirrors before writing the CD.  Check your CD low-level
-via running 'readcd -c2scan dev=/dev/cdrom'. In some cases, defective
-IDE controllers cause this error if you have DMA enabled. Also, please
-read the grml-FAQ.
+then your CD image is probably defective or incomplete, your CD-burner
+created a defective CD due to wrong writing speed or bad media or your
+CD-ROM drive is broken. This is the most common error reported.  Please
+boot with "grml testcd" to check if the CD is OK, and/or even better,
+verify the MD5 checksums that are present on the mirrors before writing
+the CD.  Check your CD low-level via running 'readcd -c2scan
+dev=/dev/cdrom'. In some cases, defective IDE controllers cause this
+error if you have DMA enabled. Also, please read the grml-FAQ.
 
 *) In case of a failing hardware autodetection, try booting with any of
 the "no-" options as shown in the table above, like in
    grml noagp noapm noapic acpi=off nodma
 to skip some critical parts of the autodetection system.
 
-*) Some boards apparently don't pass the proper memory size to the
-linux-kernel. It may cause the message "Panic: cannot mount root file
-system" and the system hangs. Use "grml mem=128M" to solve that
-problem if your system has 128MByte memory for example (caution:
-you MUST use a capital "M" here).
+*) Some boards (especially those with E-ISA slots) apparently don't pass
+the proper memory size to the linux-kernel. It may cause the message
+"Panic: cannot mount root file system" and the system hangs. Use "grml
+mem=128M" to solve that problem if your system has 128MByte memory for
+example (caution: you MUST use a capital "M" here).
 
 *) The "myconfig=/dev/partition" option allows you to reconfigure the
 system after autoconfiguration by running a bourne shell script called