+++ /dev/null
-# Filename: /etc/grml/autoconfig.small
-# Purpose: configuration for grml-autoconfig on grml-small-system
-# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
-# Bug-Reports: see http://grml.org/bugs/
-# License: This file is licensed under the GPL v2.
-################################################################################
-
-################################################################################
-# Notice: you can configure grml-autoconfig via adjusting the following values.
-# Set them to 'yes' to activate them and to 'no' to deactivate them.
-# But please notice that some options might require an additional bootparam
-# ("cheatcode") anyway, some options just de-/activate a check!
-#
-# Take a look at the script 'grml-autoconfig' as well!
-################################################################################
-
-## These are the options you might want to adjust: #############################
-
-# set console font, default: Lat15-Terminus16
-# CONSOLEFONT='iso15graf-16'
-
-# check for network devices and run pump for every present network device?
-# use script grml-network for interactive configuration and
-# /etc/network/interfaces for persistent configuration
-# default: yes
-CONFIG_DHCP='yes'
-
-# check for frequency-scalable CPU and activate cpydyn/powernowd (default: no)
-CONFIG_CPU='no'
-
-# create/regenerate /etc/fstab using [grml-]rebuildfstab?
-CONFIG_FSTAB='yes'
-# define uid for rebuildfstab used in /etc/fstab (default: grml):
-CONFIG_FSTAB_USER='grml'
-# define guid for rebuildfstab used in /etc/fstab (default: users):
-CONFIG_FSTAB_GROUP='users'
-
-# load ACPI/APM modules (default: yes)
-CONFIG_ACPI_APM='yes'
-
-# start syslog-ng (default: yes)
-CONFIG_SYSLOG='yes'
-
-# start gpm (default: yes)
-CONFIG_GPM='yes'
-
-################################################################################
-# Notice! Do not touch the following options except you really know
-# what you are doing!
-CONFIG_915RESOLUTION='no' # run 915resolution with specified options for adjusting resolution
-CONFIG_AGP='yes' # check for bootparam forceagp
-CONFIG_AUTOMOUNTER='no' # activate automounter
-CONFIG_AUTOMOUNT='yes' # automounting of device labeled GRMLCFG
-CONFIG_BLANKING='yes' # check for bootoption noblank to disable console blanking
-CONFIG_BLINDSOUND='yes' # play 'beep' and play welcome message
-CONFIG_BLIND='yes' # check for blind option or brltty
-CONFIG_CDROM_PERM='yes' # for burning on IDE-CD-Roms, k3b (and others) check for special permissions
-CONFIG_CDROM_SCRIPTS='yes' # run scripts from /cdrom/scripts
-CONFIG_CONSOLE='yes' # activate mgetty when using console=... as bootparam
-CONFIG_CREATE_MNT_DIRS='no' # create /mnt-directories
-CONFIG_DEBOOTSTRAP='yes' # support automatic installation of Debian via grml-deboostrap
-CONFIG_DEBNET='yes' # search for /etc/network/interfaces on partitions and set up network afterwards
-CONFIG_DEBS='yes' # check for bootoption debs for installing .debs
-CONFIG_DEBUG='yes' # activate start of shells during startup at several stages
-CONFIG_DISCOVER='no' # use discover for hardware detection
-CONFIG_DISTCC='no' # activate and setup distcc through bootparam distcc=$NETWORK,$INTERFACE
-CONFIG_DISTRI='yes' # support some customization via bootoption distri
-CONFIG_DMA='yes' # Enable DMA for all IDE drives
-CONFIG_EXTRACT='yes' # specify which (only in combination with bootparam myconfig/netconfig useful)
-CONFIG_FAST='yes' # skip startup of w3m on tty1
-CONFIG_FIREWIRE_DEV='no' # bugfix for kernel >=2.6.11 - create some firewire-devices
-CONFIG_FIX_PASSWD='yes' # fix unionfs-problem with passwd
-CONFIG_FIX_UNIONFS='yes' # fix/workaround for unionfs
-CONFIG_FWTIMEOUT='yes' # set timeout for firmware loading
-CONFIG_GRML2HD='yes' # check for 'grml2hd' bootoption
-CONFIG_HOMEDIR='yes' # check for persistent homedir option
-CONFIG_HOSTNAME='yes' # set hostname to 'grml' on systems running from CD
-CONFIG_HOTPLUG_AGENT='no' # deactivate specific hotplug agent(s) via bootparam
-CONFIG_HOTPLUG_BLACKLIST='no' # check for blacklist bootparam
-CONFIG_HOTPLUG_MAIN='no' # start hotplug system [should be handled by udev now]
-CONFIG_HWINFO='no' # run hwinfo for module-detection (requires bootparam 'hwinfo'!)
-CONFIG_HWSPEAK='no' # support for hardware synthesizer via speakup
-CONFIG_IPW3945='yes' # check for broken ipw3945 module
-CONFIG_KERNEL='yes' # display information on running kernel
-CONFIG_LANGUAGE='yes' # allow language specification via commandline
-CONFIG_LD_MOD='yes' # run ldconfig and depmod on systems running from harddisk; remove /etc/grml.first.boot for forcing
-CONFIG_LOCAL_NET='yes' # bring up loopback interface
-CONFIG_LOG='yes' # DEBUG=/dev/null or logfile int /tmp/...
-CONFIG_LVM='yes' # logical volume setup
-CONFIG_MIXER='no' # set audio volumes [only in live-cd mode relevant, except for bootoption nosound]
-CONFIG_MODEM='yes' # check for AC'97 Modem Controller modem
-CONFIG_MODULES='yes' # load modules specified in /etc/grml/modules
-CONFIG_MOUSE='yes' # show mouse information (expert-mode)
-CONFIG_MYCONFIG='yes' # check if we want the config floppy
-CONFIG_MYPATH='yes' # provide setting additional paths via bootoption mypath
-CONFIG_NETCONFIG='yes' # download configuration archive provided by bootoption netconfig=...
-CONFIG_NETIPV6='yes' # check for bootparam ipv6
-CONFIG_PASSWD='yes' # set password via bootparam passwd
-CONFIG_PCMCIA='no' # check for pcmcia and start cardmgr
-CONFIG_QEMU='no' # qemu specific stuff
-CONFIG_SERVICES='yes' # check for services to run, provided via bootparam
-CONFIG_SETKEYCODES='yes' # run setkeycodes when bootoption setkeycodes found
-CONFIG_SMALL='yes' # use a less "bloat" /etc/inittab for small computer with less RAM
-CONFIG_SSH='yes' # check for bootparam ssh
-CONFIG_SWRAID='yes' # check for software raid devices [only in live-mode]
-CONFIG_SWSPEAK='no' # run software synthesizer via speakup
-CONFIG_TESTCD='yes' # CD checker
-CONFIG_TIME='yes' # set clock, check for bootparam utc/gmt [only in live-mode]
-CONFIG_TIMEZONE='yes' # get bootparam 'tz' and set it as /etc/localtime [only in live-mode]
-CONFIG_TOHD='yes' # bootoption tohd=...
-CONFIG_USERFSTAB='yes' # check for username of uid 1000
-CONFIG_VMWARE='no' # vmware specific stuff (use xorg.conf.vmware)
-CONFIG_WELCOME='yes' # play welcome sound (audio)
-CONFIG_WONDERSHAPER='yes' # start wondershaper with options provided via bootparam
-CONFIG_XSTARTUP='no' # start X window system via grml-x
-## END OF FILE #################################################################
projects / grml-autoconfig.git / blobdiff