From 0e80e599d3fd528cd9c5d6b05fa115f562b737b7 Mon Sep 17 00:00:00 2001 From: Christian Hofstaedtler Date: Thu, 13 Oct 2011 22:51:00 +0200 Subject: [PATCH] Remove kismet and pcmcia config files --- etc/kismet/kismet.conf | 346 ------------------------------------------------ etc/pcmcia/wlan-ng.conf | 205 ---------------------------- 2 files changed, 551 deletions(-) delete mode 100644 etc/kismet/kismet.conf delete mode 100644 etc/pcmcia/wlan-ng.conf diff --git a/etc/kismet/kismet.conf b/etc/kismet/kismet.conf deleted file mode 100644 index 3c7d506..0000000 --- a/etc/kismet/kismet.conf +++ /dev/null @@ -1,346 +0,0 @@ -# Kismet config file -# Most of the "static" configs have been moved to here -- the command line -# config was getting way too crowded and cryptic. We want functionality, -# not continually reading --help! - -# Version of Kismet config -version=2005.06.R1 - -# Name of server (Purely for organizational purposes) -servername=Kismet - -# User to setid to (should be your normal user) -#suiduser=your_user_here - -# Sources are defined as: -# source=sourcetype,interface,name[,initialchannel] -# Source types and required drivers are listed in the README under the -# CAPTURE SOURCES section. -# The initial channel is optional, if hopping is not enabled it can be used -# to set the channel the interface listens on. -# YOU MUST CHANGE THIS TO BE THE SOURCE YOU WANT TO USE -source=none,none,addme -# Usage examples: -# source=orinoco,eth2,orinocosource -# source=cisco,eth0,ciscosource -# source=prism2,wlan0,prism2source -# source=prism2_avs,wlan0,newprism2source -# source=orinoco,eth0,orinocosource -# source=madwifi_b,ath0,madwifi -# An example source line with an initial channel: -# source=orinoco,eth0,silver,11 - -# Comma-separated list of sources to enable. This is only needed if you defined -# multiple sources and only want to enable some of them. By default, all defined -# sources are enabled. -# For example: -# enablesources=prismsource,ciscosource - -# Do we channelhop? -channelhop=true - -# How many channels per second do we hop? (1-10) -channelvelocity=5 - -# By setting the dwell time for channel hopping we override the channelvelocity -# setting above and dwell on each channel for the given number of seconds. -#channeldwell=10 - -# Do we split channels between cards on the same spectrum? This means if -# multiple 802.11b capture sources are defined, they will be offset to cover -# the most possible spectrum at a given time. This also controls splitting -# fine-tuned sourcechannels lines which cover multiple interfaces (see below) -channelsplit=true - -# Basic channel hopping control: -# These define the channels the cards hop through for various frequency ranges -# supported by Kismet. More finegrain control is available via the -# "sourcechannels" configuration option. -# -# Don't change the IEEE80211 identifiers or channel hopping won't work. - -# Users outside the US might want to use this list: -# defaultchannels=IEEE80211b:1,7,13,2,8,3,14,9,4,10,5,11,6,12 -defaultchannels=IEEE80211b:1,6,11,2,7,3,8,4,9,5,10 - -# 802.11g uses the same channels as 802.11b... -defaultchannels=IEEE80211g:1,6,11,2,7,3,8,4,9,5,10 - -# 802.11a channels are non-overlapping so sequential is fine. You may want to -# adjust the list depending on the channels your card actually supports. -# defaultchannels=IEEE80211a:36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,184,188,192,196,200,204,208,212,216 -defaultchannels=IEEE80211a:36,40,44,48,52,56,60,64 - -# Combo cards like Atheros use both 'a' and 'b/g' channels. Of course, you -# can also explicitly override a given source. You can use the script -# extras/listchan.pl to extract all the channels your card supports. -defaultchannels=IEEE80211ab:1,6,11,2,7,3,8,4,9,5,10,36,40,44,48,52,56,60,64 - -# Fine-tuning channel hopping control: -# The sourcechannels option can be used to set the channel hopping for -# specific interfaces, and to control what interfaces share a list of -# channels for split hopping. This can also be used to easily lock -# one card on a single channel while hopping with other cards. -# Any card without a sourcechannel definition will use the standard hopping -# list. -# sourcechannels=sourcename[,sourcename]:ch1,ch2,ch3,...chN - -# ie, for us channels on the source 'prism2source' (same as normal channel -# hopping behavior): -# sourcechannels=prism2source:1,6,11,2,7,3,8,4,9,5,10 - -# Given two capture sources, "prism2a" and "prism2b", we want prism2a to stay -# on channel 6 and prism2b to hop normally. By not setting a sourcechannels -# line for prism2b, it will use the standard hopping. -# sourcechannels=prism2a:6 - -# To assign the same custom hop channel to multiple sources, or to split the -# same custom hop channel over two sources (if splitchannels is true), list -# them all on the same sourcechannels line: -# sourcechannels=prism2a,prism2b,prism2c:1,6,11 - -# Port to serve GUI data -tcpport=2501 -# People allowed to connect, comma seperated IP addresses or network/mask -# blocks. Netmasks can be expressed as dotted quad (/255.255.255.0) or as -# numbers (/24) -allowedhosts=127.0.0.1 -# Address to bind to. Should be an address already configured already on -# this host, reverts to INADDR_ANY if specified incorrectly. -bindaddress=127.0.0.1 -# Maximum number of concurrent GUI's -maxclients=5 - -# Do we have a GPS? -gps=true -# Host:port that GPSD is running on. This can be localhost OR remote! -gpshost=localhost:2947 -# Do we lock the mode? This overrides coordinates of lock "0", which will -# generate some bad information until you get a GPS lock, but it will -# fix problems with GPS units with broken NMEA that report lock 0 -gpsmodelock=false - -# Packet filtering options: -# filter_tracker - Packets filtered from the tracker are not processed or -# recorded in any way. -# filter_dump - Packets filtered at the dump level are tracked, displayed, -# and written to the csv/xml/network/etc files, but not -# recorded in the packet dump -# filter_export - Controls what packets influence the exported CSV, network, -# xml, gps, etc files. -# All filtering options take arguments containing the type of address and -# addresses to be filtered. Valid address types are 'ANY', 'BSSID', -# 'SOURCE', and 'DEST'. Filtering can be inverted by the use of '!' before -# the address. For example, -# filter_tracker=ANY(!00:00:DE:AD:BE:EF) -# has the same effect as the previous mac_filter config file option. -# filter_tracker=... -# filter_dump=... -# filter_export=... - -# Alerts to be reported and the throttling rates. -# alert=name,throttle/unit,burst/unit -# The throttle/unit describes the number of alerts of this type that are -# sent per time unit. Valid time units are second, minute, hour, and day. -# Burst rates control the number of packets sent at a time -# For example: -# alert=FOO,10/min,5/sec -# Would allow 5 alerts per second, and 10 alerts total per minute. -# A throttle rate of 0 disables throttling of the alert. -# See the README for a list of alert types. -alert=NETSTUMBLER,10/min,1/sec -alert=WELLENREITER,10/min,1/sec -alert=LUCENTTEST,10/min,1/sec -alert=DEAUTHFLOOD,10/min,2/sec -alert=BCASTDISCON,10/min,2/sec -alert=CHANCHANGE,5/min,1/sec -alert=AIRJACKSSID,5/min,1/sec -alert=PROBENOJOIN,10/min,1/sec -alert=DISASSOCTRAFFIC,10/min,1/sec -alert=NULLPROBERESP,10/min,1/sec -alert=BSSTIMESTAMP,10/min,1/sec - -# Known WEP keys to decrypt, bssid,hexkey. This is only for networks where -# the keys are already known, and it may impact throughput on slower hardware. -# Multiple wepkey lines may be used for multiple BSSIDs. -# wepkey=00:DE:AD:C0:DE:00,FEEDFACEDEADBEEF01020304050607080900 - -# Is transmission of the keys to the client allowed? This may be a security -# risk for some. If you disable this, you will not be able to query keys from -# a client. -allowkeytransmit=true - -# How often (in seconds) do we write all our data files (0 to disable) -writeinterval=300 - -# Do we use sound? -# Not to be confused with GUI sound parameter, this controls wether or not the -# server itself will play sound. Primarily for headless or automated systems. -sound=false -# Path to sound player -soundplay=/usr/bin/play -# Optional parameters to pass to the player -# soundopts=--volume=.3 -# New network found -sound_new=//usr/share/kismet/wav/new_network.wav -# Wepped new network -# sound_new_wep=${prefix}/com/kismet/wav/new_wep_network.wav -# Network traffic sound -sound_traffic=//usr/share/kismet/wav/traffic.wav -# Network junk traffic found -sound_junktraffic=//usr/share/kismet/wav/junk_traffic.wav -# GPS lock aquired sound -# sound_gpslock=//usr/share/kismet/wav/foo.wav -# GPS lock lost sound -# sound_gpslost=//usr/share/kismet/wav/bar.wav -# Alert sound -sound_alert=//usr/share/kismet/wav/alert.wav - -# Does the server have speech? (Again, not to be confused with the GUI's speech) -speech=false -# Server's path to Festival -festival=/usr/bin/festival -# Are we using festival lite? If so, set the above "festival" path to also -# point to the "flite" binary -flite=false -# How do we speak? Valid options: -# speech Normal speech -# nato NATO spellings (alpha, bravo, charlie) -# spell Spell the letters out (aye, bee, sea) -speech_type=nato -# speech_encrypted and speech_unencrypted - Speech templates -# Similar to the logtemplate option, this lets you customize the speech output. -# speech_encrypted is used for an encrypted network spoken string -# speech_unencrypted is used for an unencrypted network spoken string -# -# %b is replaced by the BSSID (MAC) of the network -# %s is replaced by the SSID (name) of the network -# %c is replaced by the CHANNEL of the network -# %r is replaced by the MAX RATE of the network -speech_encrypted=New network detected, s.s.i.d. %s, channel %c, network encrypted. -speech_unencrypted=New network detected, s.s.i.d. %s, channel %c, network open. - -# Where do we get our manufacturer fingerprints from? Assumed to be in the -# default config directory if an absolute path is not given. -ap_manuf=ap_manuf -client_manuf=client_manuf - -# Use metric measurements in the output? -metric=false - -# Do we write waypoints for gpsdrive to load? Note: This is NOT related to -# recent versions of GPSDrive's native support of Kismet. -waypoints=false -# GPSDrive waypoint file. This WILL be truncated. -waypointdata=%h/.gpsdrive/way_kismet.txt -# Do we want ESSID or BSSID as the waypoint name ? -waypoint_essid=false - -# How many alerts do we backlog for new clients? Only change this if you have -# a -very- low memory system and need those extra bytes, or if you have a high -# memory system and a huge number of alert conditions. -alertbacklog=50 - -# File types to log, comma seperated -# dump - raw packet dump -# network - plaintext detected networks -# csv - plaintext detected networks in CSV format -# xml - XML formatted network and cisco log -# weak - weak packets (in airsnort format) -# cisco - cisco equipment CDP broadcasts -# gps - gps coordinates -logtypes=dump,network,csv,xml,weak,cisco,gps - -# Do we track probe responses and merge probe networks into their owners? -# This isn't always desireable, depending on the type of monitoring you're -# trying to do. -trackprobenets=true - -# Do we log "noise" packets that we can't decipher? I tend to not, since -# they don't have anything interesting at all in them. -noiselog=false - -# Do we log corrupt packets? Corrupt packets have enough header information -# to see what they are, but someting is wrong with them that prevents us from -# completely dissecting them. Logging these is usually not a bad idea. -corruptlog=true - -# Do we log beacon packets or do we filter them out of the dumpfile -beaconlog=true - -# Do we log PHY layer packets or do we filter them out of the dumpfile -phylog=true - -# Do we mangle packets if we can decrypt them or if they're fuzzy-detected -mangledatalog=true - -# Do we do "fuzzy" crypt detection? (byte-based detection instead of 802.11 -# frame headers) -# valid option: Comma seperated list of card types to perform fuzzy detection -# on, or 'all' -fuzzycrypt=wtapfile,wlanng,wlanng_legacy,wlanng_avs,hostap,wlanng_wext,ipw2200,ipw2915 - -# Do we use network-classifier fuzzy-crypt detection? This means we expect -# packets that are associated with an encrypted network to be encrypted too, -# and we process them by the same fuzzy compare. -# This essentially replaces the fuzzycrypt per-source option. -netfuzzycrypt=true - -# What type of dump do we generate? -# valid option: "wiretap" -dumptype=wiretap -# Do we limit the size of dump logs? Sometimes ethereal can't handle big ones. -# 0 = No limit -# Anything else = Max number of packets to log to a single file before closing -# and opening a new one. -dumplimit=0 - -# Do we write data packets to a FIFO for an external data-IDS (such as Snort)? -# See the docs before enabling this. -#fifo=/tmp/kismet_dump - -# Default log title -logdefault=Kismet - -# logtemplate - Filename logging template. -# This is, at first glance, really nasty and ugly, but you'll hardly ever -# have to touch it so don't complain too much. -# -# %n is replaced by the logging instance name -# %d is replaced by the current date as Mon-DD-YYYY -# %D is replaced by the current date as YYYYMMDD -# %t is replaced by the starting log time -# %i is replaced by the increment log in the case of multiple logs -# %l is replaced by the log type (dump, status, crypt, etc) -# %h is replaced by the home directory -# ie, "netlogs/%n-%d-%i.dump" called with a logging name of "Pok" could expand -# to something like "netlogs/Pok-Dec-20-01-1.dump" for the first instance and -# "netlogs/Pok-Dec-20-01-2.%l" for the second logfile generated. -# %h/netlots/%n-%d-%i.dump could expand to -# /home/foo/netlogs/Pok-Dec-20-01-2.dump -# -# Other possibilities: Sorting by directory -# logtemplate=%l/%n-%d-%i -# Would expand to, for example, -# dump/Pok-Dec-20-01-1 -# crypt/Pok-Dec-20-01-1 -# and so on. The "dump", "crypt", etc, dirs must exist before kismet is run -# in this case. -logtemplate=/var/log/kismet/%n-%d-%i.%l - -# Where do we store the pid file of the server? -piddir=/var/run/ - -# Where state info, etc, is stored. You shouldnt ever need to change this. -# This is a directory. -configdir=/var/lib/kismet/ - -# cloaked SSID file. You shouldn't ever need to change this. -ssidmap=ssid_map - -# Group map file. You shouldn't ever need to change this. -groupmap=group_map - -# IP range map file. You shouldn't ever need to change this. -ipmap=ip_map - diff --git a/etc/pcmcia/wlan-ng.conf b/etc/pcmcia/wlan-ng.conf deleted file mode 100644 index 8e3b585..0000000 --- a/etc/pcmcia/wlan-ng.conf +++ /dev/null @@ -1,205 +0,0 @@ - -device "prism2_cs" - class "wlan-ng" module "prism2_cs" - -# This is commented out as the regular orinoco drivers can handle this -# card. -#card "Intersil PRISM2 Reference Design 11Mb/s 802.11b WLAN Card" -# version "INTERSIL", "HFA384x/IEEE" -# bind "prism2_cs" - -card "Compaq WL100/200 11Mb/s 802.11b WLAN Card" - manfid 0x0138, 0x0002 - bind "prism2_cs" - -card "Compaq iPaq HNW-100 11Mb/s 802.11b WLAN Card" - manfid 0x028a, 0x0002 - bind "prism2_cs" - -card "Samsung SWL2000-N 11Mb/s 802.11b WLAN Card" - manfid 0x0250, 0x0002 - bind "prism2_cs" - -card "Z-Com XI300 11Mb/s 802.11b WLAN Card" - manfid 0xd601, 0x0002 - bind "prism2_cs" - -card "ZoomAir 4100 11Mb/s 802.11b WLAN Card" - version "ZoomAir 11Mbps High", "Rate wireless Networking" - bind "prism2_cs" -# Disabled in Debian package because the normal pcmcia drivers handle this -# one. -#card "Linksys WPC11 11Mbps 802.11b WLAN Card" -# version "Instant Wireless ", " Network PC CARD", "Version 01.02" -# bind "prism2_cs" - -card "Addtron AWP-100 11Mbps 802.11b WLAN Card" - version "Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02" - bind "prism2_cs" - -card "D-Link DWL-650 11Mbps 802.11b WLAN Card" - version "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02" - bind "prism2_cs" - -card "SMC 2632W 11Mbps 802.11b WLAN Card" - version "SMC", "SMC2632W", "Version 01.02" - bind "prism2_cs" - -card "BroMax Freeport 11Mbps 802.11b WLAN Card (Prism 2.5)" - version "Intersil", "PRISM 2_5 PCMCIA ADAPTER", "ISL37300P", "Eval-RevA" - bind "prism2_cs" - -card "U.S. Robotics IEEE 802.11b PC-CARD" - version "U.S. Robotics", "IEEE 802.11b PC-CARD", "Version 01.02" - bind "prism2_cs" - -card "Level-One WPC-0100" - version "Digital Data Communications", "WPC-0100" - bind "prism2_cs" - - -# Changed by grml-team. {{{ -# Latest change: Die Nov 2 23:36:05 CET 2004 -card "Linksys WPC11 11Mbps 802.11b WLAN Card" - manfid 0x0274, 0x1612 - bind "orinoco_cs" -# original: -# card "Bromax OEM 11Mbps 802.11b WLAN Card (Prism 2.5)" -# manfid 0x0274, 0x1612 -# bind "prism2_cs" -# }}} - -card "Bromax OEM 11Mbps 802.11b WLAN Card (Prism 3)" - manfid 0x0274, 0x1613 - bind "prism2_cs" - -card "corega K.K. Wireless LAN PCC-11" - version "corega K.K.", "Wireless LAN PCC-11" - bind "prism2_cs" - -card "corega K.K. Wireless LAN PCCA-11" - version "corega K.K.", "Wireless LAN PCCA-11" - bind "prism2_cs" - -card "CONTEC FLEXSCAN/FX-DDS110-PCC" - manfid 0xc001, 0x0008 - bind "prism2_cs" - -card "PLANEX GeoWave/GW-NS110" - version "PLANEX", "GeoWave/GW-NS110" - bind "prism2_cs" - -card "Ambicom WL1100 11Mbps 802.11b WLAN Card" - version "OEM", "PRISM2 IEEE 802.11 PC-Card", "Version 01.02" - bind "prism2_cs" - -card "LeArtery SYNCBYAIR 11Mbps 802.11b WLAN Card" - version "LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", "Version 01.02" - bind "prism2_cs" - -card "Intermec MobileLAN 11Mbps 802.11b WLAN Card" - manfid 0x01ff, 0x0008 - bind "prism2_cs" - -card "NETGEAR MA401 11Mbps 802.11 WLAN Card" - version "NETGEAR MA401 Wireless PC", "Card", "Version 01.00" - bind "prism2_cs" - -card "Intersil PRISM Freedom 11mbps 802.11 WLAN Card" - version "Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", "Eval-RevA" - bind "prism2_cs" - -card "OTC Wireless AirEZY 2411-PCC 11Mbps 802.11 WLAN Card" - version "OTC", "Wireless AirEZY 2411-PCC WLAN Card", "Version 01.02" - bind "prism2_cs" - -card "Dynalink L11HDT 11Mbps 802.11 WLAN Card" - version "802.11", "11Mbps Wireless LAN Card", "v08C1", "" - manfid 0xc250, 0x0002 - bind "prism2_cs" - -card "PROXIM RangeLAN-DS/LAN PC CARD" - version "PROXIM", "RangeLAN-DS/LAN PC CARD" - bind "prism2_cs" - -card "ACTIONTEC PRISM Wireless LAN PC Card" - version "ACTIONTEC", "PRISM Wireless LAN PC Card", "0381", "RevA" - manfid 0x1668, 0x0101 - bind "prism2_cs" - -# This one is disabled as well due to conflict with the normal pcmcia -# drivers. -#card "3Com AirConnect 3CRWE737A" -# version "3Com", "3CRWE737A AirConnect Wireless LAN PC Card" -# bind "prism2_cs" - -card "3Com AirConnect 3CRWE777A" - version "3Com", "3CRWE777A AirConnect Wireless LAN PCI Card" - bind "prism2_cs" - -card "ASUS WL-100 802.11b WLAN PC Card" - version "ASUS", "802_11b_PC_CARD_25" - bind "prism2_cs" - -card "ASUS WL-110 802.11b WLAN CF Card" - version "ASUS", "802_11B_CF_CARD_25" - bind "prism2_cs" - -card "BUFFALO WLI-CF-S11G 802.11b WLAN Card" - version "BUFFALO", "WLI-CF-S11G" - bind "prism2_cs" - -card "Linksys WCF11 11Mbps 802.11b WLAN Card (Prism 2.5)" - version "The Linksys Group, Inc.", "Wireless Network CF Card", "ISL37300P", "RevA" - bind "prism2_cs" - -card "Linksys WCF12 11Mbps 802.11b WLAN Card (Prism 3)" - version "Linksys", "Wireless CompactFlash Card", "", "" - manfid 0x028a, 0x0673 - bind "prism2_cs" - -card "NETGEAR MA401RA 11Mbps 802.11 WLAN Card" - version "NETGEAR MA401RA Wireless PC", "Card", "ISL37300P", "Eval-RevA" - bind "prism2_cs" - -card "D-Link DCF-660W 11Mbps 802.11b WLAN Card" - manfid 0xd601, 0x0005 - bind "prism2_cs" - -card "Microsoft Wireless Notebook Adapter MN-520" - manfid 0x02d2, 0x0001 - bind "prism2_cs" - -card "AnyPoint(TM) Wireless II PC Card" - manfid 0x0089, 0x0002 - bind "prism2_cs" - -card "D-Link DRC-650 802.11b WLAN Card" - version "D", "Link DRC-650 11Mbps WLAN Card", "Version 01.02", "" - bind "prism2_cs" - -card "Adaptec AWN-8030" - manfid 0x9005, 0x0021 - bind "prism2_cs" - -card "D-Link DWL-650 rev P 802.11b WLAN card" - manfid 0x000b, 0x7110 -# version "D-Link", "DWL-650 Wireless PC Card RevP", "ISL37101P-10", "A3" - bind "prism2_cs" - -# This one is commented out since it matches the common lucent/orinoco -# card. -#card "I-Gate 11M PC Card" -# version "INTERSIL", "I-GATE 11M PC Card / PC Card plus", "Version 01.02" -# bind "prism2_cs" - -card "benQ AWL100 802.11b WLAN Card" - version "BENQ", "AWL100 PCMCIA ADAPTER", "ISL37300P", "Eval-RevA" - manfid 0x000b, 0x7300 - bind "prism2_cs" - -card "Intersil Prism 2 card" - version "INTERSIL" - manfid 0x0156, 0x0002 - bind "prism2_cs" - -- 2.1.4