X-Git-Url: http://git.grml.org/?p=grml-live.git;a=blobdiff_plain;f=templates%2FGRML%2Fgrml-cheatcodes.txt;h=1d3bd3e3ec6761821b9865df9960722839d0a3b0;hp=24719d71c8aba791c92e70d393faa319a57c7e36;hb=f83953b4af661b491a8f7b34c1129ed00161b9c0;hpb=3dd2f8dffc1649cc948e5e917969b6104cfd9175

diff --git a/templates/GRML/grml-cheatcodes.txt b/templates/GRML/grml-cheatcodes.txt
index 24719d7..1d3bd3e 100644
--- a/templates/GRML/grml-cheatcodes.txt
+++ b/templates/GRML/grml-cheatcodes.txt
@@ -99,6 +99,7 @@ grml scripts=path-name              Execute script (defaulting to grml.sh) insid
                                     the directory are executed.
 grml config=path-name               Unpack archive that path-name points to
 grml noautoconfig                   Disable searching for device labeled GRMLCFG
+grml nobeep                         Disable welcome chime, sounded before grml-quickconfig starts.
 
 Notice: Take a look at http://grml.org/config/ and 'man 1 grml-autoconfig'
 for more information regarding the configuration framework of Grml.
@@ -161,7 +162,6 @@ grml nosyslog                       Do not start syslog daemon
 grml nogpm                          Disable GPM daemon
 grml noconsolefont                  Disable setting of console font (using consolechars)
 grml noblank                        Disable console blanking
-grml tsplash                        Text based bootsplash
 grml noquick                        Disable grml-quickconfig startup script
 grml small                          Do not start that many consoles
 grml wondershaper=eth0,1000,500     Set up basic traffic shaping
@@ -195,11 +195,9 @@ grml ethdevice=...                  Use specified network device for network boo
 grml xmodule=ati|fbdev|i810|mga     Use specified X.org-Module (1)
 grml xmodule=nv|radeon|savage|s3    Use specified X.org-Module (2)
 grml xmodule=radeon|svga|i810       Use specified X.org-Module (3)
-grml no{acpi,agp,apm,cpu,dhcp}      Skip parts of HW-detection (1)
+grml no{acpi,agp,cpu,dhcp}          Skip parts of HW-detection (1)
 grml no{dma,fstab,modem}            Skip parts of HW-detection (2)
 grml no{pcmcia,scsi,swap,usb}       Skip parts of HW-detection (3)
-grml 915resolution=...              Start resolution modify tool for Intel graphic chipset
-                                    usage: $MODE,$XRESO,$YRESO
 grml blacklist=modulename[,module2] Completely disable loading of specified module(s) via
                                     blacklisting through udev's /etc/modprobe.d/grml
 grml fwtimeout=50                   Set firmware timeout via /sys/class/firmware/timeout to specified value
@@ -208,8 +206,6 @@ grml vol=number                     Set mixer volumes to level $number
 grml micvol=number                  Set mixer volume of microphone to level $number (default: 0)
 grml pnpbios=off                    No PnP Bios initialization
 grml acpi=off                       Disable ACPI Bios completely
-grml nousb2                         Disable initialization of USB 2.x controller(s)
-grml nousb                          Disable initialization of USB in booting sequence
 grml nofirewire                     Disable initialization of firewire devices in booting sequence
 grml pci=irqmask=0x0e98             Try this, if PS/2 mouse doesn't work *)
 grml pci=bios                       Workaround for bad PCI controllers
@@ -229,7 +225,7 @@ grml nouveau.modeset=0 nomodeset    Disable Kernel Mode Setting (KMS) for Nouvea
 Installation related settings:
 ------------------------------
 
-Caution: do *NOT* use the grml2hd and/or debian2hd bootoption if you do not know what you are doing!
+Caution: do *NOT* use the debian2hd bootoption if you do not know what you are doing!
 
 Install plain Debian via debian2hd bootoption (which runs grml-debootstrap in non-interactive mode):
 
@@ -247,22 +243,6 @@ debian2hd <options>                 ... whereas valid options for debian2hd are:
 
   See http://grml.org/grml-debootstrap/ for more information.
 
-Install grml via grml2hd bootoption (which runs grml2hd in non-interactive mode):
-
-grml2hd <options>                   ... whereas valid options for grml2hd are:
-
-   user=                user name for user which should be used at hd-install
-   filesystem={ext2|ext3|reiserfs|reiser4|jfs|xfs}      filesystem to be used
-   mbr=/dev/...  partition where MBR should be installed (default:=partition)
-   partition=/dev/...                partition where grml should be installed
-
-  Usage example for booting:
-   grml2hd partition=/dev/sda4 mbr=/dev/sda filesystem=ext3 user=mika
-
-  Passwords of user root and user are "grml" - please adjust after hd-install!
-
-  See http://grml.org/grml2hd/ for more information.
-
 Additional notes:
 -----------------
 
@@ -279,7 +259,7 @@ error if you have DMA enabled. Also, please read the grml-FAQ.
 
 *) In case of a failing hardware autodetection, try booting with any of
 the "no-" options as shown in the table above, like in
-   grml noagp noapm noapic acpi=off nodma
+   grml noagp noapic acpi=off nodma
 to skip some critical parts of the autodetection system.
 
 *) Some boards (especially those with E-ISA slots) apparently don't pass