X-Git-Url: http://git.grml.org/?p=grml-live.git;a=blobdiff_plain;f=templates%2FGRML%2Fgrml-cheatcodes.txt;h=bf5a6402c5acd360bdb823219c87b58322db693e;hp=57fb758e7589092d024cddc2ec4a45899136f581;hb=30cf20eb857924bebf23bc5481088fa639231bef;hpb=f77bfcc5bdb6f3a8407debf6cc6c81a4d1696164

diff --git a/templates/GRML/grml-cheatcodes.txt b/templates/GRML/grml-cheatcodes.txt
index 57fb758..bf5a640 100644
--- a/templates/GRML/grml-cheatcodes.txt
+++ b/templates/GRML/grml-cheatcodes.txt
@@ -21,8 +21,10 @@ debug                               Get shells during process of booting for deb
 bootchart                           Create chart of booting sequence in /var/log/bootchart.tgz
 forensic                            Do not touch any harddisks during hardware recognition
 serial                              Activate ttyS0 and start mgetty
+grub                                Boot Grub bootloader (special all-in-one-image)
 dos                                 Boot FreeDOS
-grub                                Boot into the Grub bootloader
+bsd                                 Boot MirOS BSD
+hdt                                 Boot Hardware Detection Tool (from syslinux project)
 qemu                                Boot with special options for use in Qemu
 vmware                              Boot with special options for use in VMware
 
@@ -64,6 +66,7 @@ grml debnet                         Search through local partitions for file /et
 grml mypath=...                     Add specified option into $PATH of Zsh.
                                     For example when using "grml mypath=/foobar" then /foobar
                                     will be added to the end of $PATH inside Zsh.
+grml noautoconfig                   Disable searching for device labeled GRMLCFG.
 
 Notice: Take a look at http://grml.org/config/ and /usr/share/doc/grml-saveconfig/grml-config.html
 for more information regarding the configuration framework of grml.
@@ -149,6 +152,7 @@ grml noswraid                       Disable scanning for software raid arrays (c
 grml swraid                         Enable automatic assembling of software raid arrays
 grml nolvm                          Disable scanning for Logical Volumes (LVM)
 grml lvm                            Automatically activate Logival Volumes (LVM) during boot
+grml readonly                       Make sure all harddisk devices (/dev/hd* /dev/sd*) are forced to read-only mode
 grml xmodule=ati|fbdev|i810|mga     Use specified X.org-Module (1)
 grml xmodule=nv|radeon|savage|s3    Use specified X.org-Module (2)
 grml xmodule=radeon|svga|i810       Use specified X.org-Module (3)
@@ -227,25 +231,25 @@ driver during that procedure.
 
 *) If your grml-CD makes strange noises during boot, or you see frequent
 errors like "squashfs: read error", or programs are crashing randomly,
-then your CD image is probably defective or incomplete, or your CD-burner
-created a defective CD due to wrong writing speed or bad media. This is
-the most common error reported.  Please boot with "grml testcd" to check
-if the CD is OK, and/or even better, verify the MD5 checksums that are
-present on the mirrors before writing the CD.  Check your CD low-level
-via running 'readcd -c2scan dev=/dev/cdrom'. In some cases, defective
-IDE controllers cause this error if you have DMA enabled. Also, please
-read the grml-FAQ.
+then your CD image is probably defective or incomplete, your CD-burner
+created a defective CD due to wrong writing speed or bad media or your
+CD-ROM drive is broken. This is the most common error reported.  Please
+boot with "grml testcd" to check if the CD is OK, and/or even better,
+verify the MD5 checksums that are present on the mirrors before writing
+the CD.  Check your CD low-level via running 'readcd -c2scan
+dev=/dev/cdrom'. In some cases, defective IDE controllers cause this
+error if you have DMA enabled. Also, please read the grml-FAQ.
 
 *) In case of a failing hardware autodetection, try booting with any of
 the "no-" options as shown in the table above, like in
    grml noagp noapm noapic acpi=off nodma
 to skip some critical parts of the autodetection system.
 
-*) Some boards apparently don't pass the proper memory size to the
-linux-kernel. It may cause the message "Panic: cannot mount root file
-system" and the system hangs. Use "grml mem=128M" to solve that
-problem if your system has 128MByte memory for example (caution:
-you MUST use a capital "M" here).
+*) Some boards (especially those with E-ISA slots) apparently don't pass
+the proper memory size to the linux-kernel. It may cause the message
+"Panic: cannot mount root file system" and the system hangs. Use "grml
+mem=128M" to solve that problem if your system has 128MByte memory for
+example (caution: you MUST use a capital "M" here).
 
 *) The "myconfig=/dev/partition" option allows you to reconfigure the
 system after autoconfiguration by running a bourne shell script called