6 %!postproc(man): "^(\.TH.*) 1 " "\1 5 "
10 grmlzshrc - Grml's zsh setup
14 //zsh// [**options**]...
18 The Grml project provides a fairly exhaustive interactive setup (referred to
19 as //grmlzshrc// throughout this document) for the amazing unix shell zsh
20 (http://zsh.sourceforge.net). This is the reference manual for that
23 To use //grmlzshrc//, you need at least version 3.1.7 of zsh (although not all
24 features are enabled in every version).
26 //grmlzshrc// behaves differently depending on which user loads it. For the
27 root user (**EUID** == 0) only a subset of features is loaded by default. This
28 behaviour can be altered by setting the **GRML_ALWAYS_LOAD_ALL** STARTUP
31 Users may want to keep an up-to-date version of the setup (possibly from the
32 git-sources) in //~/.zshrc//. If that happens on a system where the global
33 zshrc is also a //grmlzshrc// (but possibly an older one), you can inhibit
34 loading the global version by doing:
37 echo setopt no_global_rcs >> ~/.zshenv
40 Note, that this will disable //ANY// global files, except for the global
44 Some of the behaviour of //grmlzshrc// can be altered by setting certain shell
45 variables. These may be set temporarily when starting zsh like this:
49 Or by setting them permanently in **zshrc.pre** (See AUXILIARY FILES below).
52 If set to a value greater than zero and //acpi// installed, //grmlzshrc// will
53 put the battery status into the right hand side interactive prompt.
55 : **COMMAND_NOT_FOUND**
56 A non zero value activates a handler, which is called when a command can not
57 be found. The handler is defined by GRML_ZSH_CNF_HANDLER (see below).
59 : **GRML_ALWAYS_LOAD_ALL**
60 Enables the whole Grml setup for root, if set to a non zero value.
62 : **GRML_ZSH_CNF_HANDLER**
63 This variable contains the handler to be used by COMMAND_NOT_FOUND (see above)
64 and defaults to "/usr/share/command-not-found/command-not-found".
66 : **GRMLSMALL_SPECIFIC**
67 Set this to zero to remove items in zsh config, which do not work in
71 Where zsh saves the history. Default: ${HOME}/.zsh_history.
74 Number of commands to be kept in the history. On a Grml-CD this defaults to
75 500, on a hard disk installation to 5000.
78 Sets the frequency in seconds for zsh to check for new mail. Defaults to 30.
79 A value of zero turns off checking.
82 Non zero values deactivate automatic correction of commands.
85 If set to zero (default), allows selection from a menu, if there are at least
86 five possible options of completion.
89 A non zero value disables precmd and preexec commands. These are functions
90 that are run before every command (setting xterm/screen titles etc.).
93 Show time (user, system and cpu) used by external commands, if they run longer
94 than the defined number of seconds (default: 5).
97 Number of commands to be stored in ${HISTFILE}. Defaults to 1000 on a Grml-CD
98 and to 10000 on an installation on hard disk.
101 As in tcsh(1) an array of login/logout events to be reported by the shell
102 builtin "log". For details see zshparam(1). Defaults to (notme root).
104 : **ZSH_NO_DEFAULT_LOCALE**
105 Import "/etc/default/locale", if set to zero (default).
108 A non zero value causes shell functions to be profiled. The results can be
109 obtained with the zprof builtin command (see zshmodules(1) for details).
112 = FEATURE DESCRIPTION =
113 This is an in depth description of non-standard features implemented by
116 == DIRSTACK HANDLING ==
117 The dirstack in //grmlzshrc// has a persistent nature. It is stored into a
118 file each time zsh's working directory is changed. That file can be configured
119 via the **DIRSTACKFILE** variable and it defaults to **~/.zdirs**. The
120 **DIRSTACKSIZE** variable defaults to **20** in this setup.
122 The **DIRSTACKFILE** is loaded each time zsh starts, therefore freshly started
123 zshs inherit the dirstack of the zsh that most recently updated
126 == DIRECTORY BASED PROFILES ==
127 If you want certain settings to be active in certain directories (and
128 automatically switch back and forth between them), this is what you want.
131 zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)' profile grml
132 zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian
135 When that's done and you enter a directory that matches the pattern
136 in the third part of the context, a function called chpwd_profile_grml,
137 for example, is called (if it exists).
139 If no pattern matches (read: no profile is detected) the profile is
140 set to 'default', which means chpwd_profile_default is attempted to
143 A word about the context (the ':chpwd:profiles:*' stuff in the zstyle
144 command) which is used: The third part in the context is matched against
145 **$PWD**. That's why using a pattern such as /foo/bar(|/|/*) makes sense.
146 Because that way the profile is detected for all these values of **$PWD**:
154 So, if you want to make double damn sure a profile works in /foo/bar
155 and everywhere deeper in that tree, just use (|/|/*) and be happy.
157 The name of the detected profile will be available in a variable called
158 'profile' in your functions. You don't need to do anything, it'll just
161 Then there is the parameter **$CHPWD_PROFILE** which is set to the profile,
162 that was active up to now. That way you can avoid running code for a
163 profile that is already active, by running code such as the following
164 at the start of your function:
167 function chpwd_profile_grml() {
168 [[ ${profile} == ${CHPWD_PROFILE} ]] && return 1
173 The initial value for **$CHPWD_PROFILE** is 'default'.
175 === Signaling availabily/profile changes ===
177 If you use this feature and need to know whether it is active in your
178 current shell, there are several ways to do that. Here are two simple
181 a) If knowing if the profiles feature is active when zsh starts is
182 good enough for you, you can put the following snippet into your
186 (( ${+functions[chpwd_profiles]} )) &&
187 print "directory profiles active"
190 b) If that is not good enough, and you would prefer to be notified
191 whenever a profile changes, you can solve that by making sure you
192 start **every** profile function you create like this:
195 function chpwd_profile_myprofilename() {
196 [[ ${profile} == ${CHPWD_PROFILE} ]] && return 1
197 print "chpwd(): Switching to profile: $profile"
202 That makes sure you only get notified if a profile is **changed**,
203 not everytime you change directory.
205 === Version requirement ===
206 This feature requires zsh //4.3.3// or newer.
209 == ACCEPTLINE WRAPPER ==
210 The //accept-line// wiget is the one that is taking action when the **return**
211 key is hit. //grmlzshrc// uses a wrapper around that widget, which adds new
214 This wrapper is configured via styles. That means, you issue commands, that look
218 zstyle 'context' style value
221 The context namespace, that we are using is 'acceptline'. That means, the actual
222 context for your commands look like: **':acceptline:<subcontext>'**.
224 Where **<subcontext>** is one of: **default**, **normal**, **force**, **misc**
228 === Recognized Contexts ===
230 This is the value, the context is initialized with.
231 The //compwarnfmt and //rehash// styles are looked up in this context.
234 If the first word in the command line is either a command, alias, function,
235 builtin or reserved word, you are in this context.
238 This is the context, that is used if you hit enter again, after being warned
239 about the existence of a _completion for the non-existing command you
243 This is the context, you are in if the command line is empty or only
244 consists of whitespace.
247 This context is in effect, if you entered something that does not match any
248 of the above. (e.g.: variable assignments).
251 === Available Styles ===
253 If you set this style to true, the warning about non existent commands,
254 for which completions exist will not be issued. (Default: **false**)
257 The message, that is displayed to warn about the _completion issue.
258 (default: **'%c will not execute and completion %f exists.'**)
259 '%c' is replaced by the command name, '%f' by the completion's name.
262 If this is set, we'll force rehashing, if appropriate. (Defaults to
263 **true** in //grmlzshrc//).
266 This can be a list of wigdets to call in a given context. If you need a
267 specific order for these to be called, name them accordingly. The default value
268 is an **empty list**.
271 The name of a widget, that is called after the widgets from 'actions'.
272 By default, this will be '.accept-line' (which is the built-in accept-line
276 If true in the current context, call the widget in the 'default_action'
277 style. (The default is **true** in all contexts.)
283 == GNU/SCREEN STATUS SETTING ==
284 //grmlzshrc// sets screen's hardstatus lines to the currently running command
285 or **'zsh'** if the shell is idling at its prompt. If the current working
286 directory is inside a repository unter version control, screen status is set
287 to: **'zsh: <repository name>'** via zsh's vcs_info.
290 == PERSISTENT HISTORY ==
291 If you got commands you consider important enough to be included in every
292 shell's history, you can put them into ~/.important_commands and they will be
293 available via the usual history lookup widgets.
297 == ENVIRONMENT VARIABLES ==
298 //grmlzshrc// sets some environment variables, which influence the
299 behaviour of applications.
302 Set to "yes". Some applications read this to learn about properties
303 of the terminal they are running in.
306 If not already set, sets the default editor. Falls back to vi(1),
307 if vim(1) is not available.
310 Some environment variables that add colour support to less(1) for viewing
311 man pages. See termcap(5) for details.
314 The mailbox file for the current user is set to /var/mail/$USER, if not
315 already set otherwise.
318 Set less(1) as default pager, if not already set to something different.
321 Holds the path to shared files for the C++ application framework QT
325 Set explicitly to /bin/zsh, to prevent certain terminal emulators to
326 default to /bin/sh or /bin/bash.
330 Apart from zsh's default options, //grmlzshrc// sets some options
331 that change the behaviour of zsh. Options that change Z-shell's default
332 settings are marked by <grml>. But note, that zsh's defaults vary depending
333 on its emulation mode (csh, ksh, sh, or zsh). For details, see zshoptions(1).
336 Zsh sessions, that use //grmlzshrc//, will append their history list to the
337 history file, rather than replace it. Thus, multiple parallel zsh sessions
338 will all have the new entries from their history lists added to the history
339 file, in the order that they exit. The file will still be periodically
340 re-written to trim it when the number of lines grows 20% beyond the value
341 specified by $SAVEHIST.
344 If a command is issued that can't be executed as a normal command, and the
345 command is the name of a directory, perform the cd command to that directory.
347 : **auto_pushd** <grml>
348 Make cd push the old directory onto the directory stack.
350 : **completeinword** <grml>
351 If the cursor is inside a word, completion is done from both ends;
352 instead of moving the cursor to the end of the word first and starting
355 : **extended_glob** <grml>
356 Treat the '#', '~' and '^' characters as active globbing pattern characters.
358 : **extended_history** <grml>
359 Save each command's beginning timestamp (in seconds since the epoch) and the
360 duration (in seconds) to the history file.
363 Whenever a command completion is attempted, make sure the entire command
364 path is hashed first. This makes the first completion slower.
366 : **histignorealldups** <grml>
367 If a new command line being added to the history list duplicates an
368 older one, the older command is removed from the list, even if it is
369 not the previous event.
371 : **histignorespace** <grml>
372 Remove command lines from the history list when the first character on
373 the line is a space, or when one of the expanded aliases contains a
374 leading space. Note that the command lingers in the internal history
375 until the next command is entered before it vanishes.
377 : **longlistjobs** <grml>
378 List jobs in long format by default.
381 Avoid to beep on errors in zsh command line editing (zle).
384 A wildcard character never matches a leading '.'.
387 Do not send the hangup signal (HUP:1) to running jobs when the shell exits.
389 : **nonomatch** <grml>
390 If a pattern for filename generation has no matches, do not print an error
391 and leave it unchanged in the argument list. This also applies to file
392 expansion of an initial `~' or `='.
395 Report the status of background jobs immediately, rather than waiting until
396 just before printing a prompt.
398 : **pushd_ignore_dups** <grml>
399 Don't push multiple copies of the same directory onto the directory stack.
401 : **share_history** <grml>
402 As each line is added to the history file, it is checked to see if anything
403 else was written out by another shell, and if so it is included in the
404 history of the current shell too. Using !-style history, the commands from
405 the other sessions will not appear in the history list unless you explicitly
406 type the "history" command. This option is activated for zsh versions >= 4,
411 Apart from zsh's default key bindings, //grmlzshrc// comes with its own set of
412 key bindings. Note that bindings like **ESC-e** can also be typed as **ALT-e**
416 Edit the current command buffer in your favourite editor.
419 Deletes a word left of the cursor; seeing '/' as additional word separator.
422 Jump right after the first word.
425 Create directory under cursor or the selected area.
426 To select an area press ctrl-@ and use the cursor.
427 Use case: you type "mv abc ~/testa/testb/testc/" and remember that the
428 directory does not exist yet -> press **CTRL-xM** and problem solved.
431 Searches the last occurence of string before the cursor in the command history.
434 Display help on keybindings and zsh line editor. Press consecutively to page through content.
437 Brings a job, which got suspended with CTRL-z back to foreground.
440 == SHELL FUNCTIONS ==
441 //grmlzshrc// comes with a wide array of defined shell functions to ease the
444 : **855resolution()**
445 If 915resolution is available, issues a warning to the user to run it instead
446 to modify the resolution on intel graphics chipsets.
449 Lists files in current directory, which have been accessed within the
450 last N days. N is an integer to be passed as first and only argument.
451 If no argument is specified N is set to 1.
454 Sets all ulimit values to "unlimited".
457 Lists processes matching given pattern.
459 : **aoeu(), asdf(), uiae()**
460 Pressing the 'asdf' keys toggles between dvorak or neon and us keyboard
463 : **apache2-ssl-certificate()**
464 Advices the user how to create self signed certificates.
467 Login on the host provided as argument using autossh. Then reattach a GNU screen
468 session if a detached session is around or detach a currently attached screen or
469 else start a new screen. This is especially useful for roadwarriors using GNU
473 Simple backup of a file or directory using cp(1). The target file name is the
474 original name plus a time stamp attached. Symlinks and file attributes like mode,
475 ownership and timestamps are preserved.
478 If the original cdrecord is not installed, issues a warning to the user to
479 use the wodim binary instead. Wodim is the debian fork of Joerg Schillings
483 Creates a temporary directory using mktemp. Then changes current
484 working directory to it.
487 Lists files in current directory, which have been changed within the
488 last N days. N is an integer to be passed as first and only argument.
489 If no argument is specified N is set to 1.
492 Returns true if given command exists either as program, function, alias,
493 builtin or reserved word. If the option -c is given, only returns true,
494 if command is a program.
497 Changes directory to $HOME on first invocation of zsh. This is neccessary on
498 grml systems with autologin.
501 Changes current directory to the one supplied by argument and lists the files
502 in it, including file names starting with ".".
505 Shows the changelog of given package in $PAGER.
508 Tells the user to use grml-debootstrap, if she wants to install debian to
512 A trick from $LINUX-KERNELSOURCE/Documentation/power/swsusp.txt. It brings
513 back interactive responsiveness after suspend, when the system is swapping
517 Shows the NEWS file for the given package in $PAGER.
520 Takes packagename as argument. Sets current working directory to
521 /usr/share/doc/<packagename> and prints out a directory listing.
528 Edit given shell function.
531 Reloads an autoloadable shell function (See autoload in zshbuiltins(1)).
534 Fetches 3ware RAID controller software using get_3ware(1).
537 Prints the hexadecimal representation of the number supplied as argument
541 Use GNU diff with options -ubwd for mercurial.
544 Displays diffstat between the revision given as argument and tip (no
545 argument means last revision).
548 Outputs highlighted diff; needs highstring(1).
551 Sets up an IPv6 tunnel on interface sit1. Needs one argument -
552 either "start", "stop" or "status".
555 Returns true, if zsh version is equal or greater than 4, else false.
558 Returns true, if zsh version is equal or greater than 4.1, else false.
561 Returns true, if zsh version is equal or greater than 4.2, else false.
564 Returns true, if zsh version is equal or greater than 4.2.5, else false.
567 Returns true, if zsh version is equal or greater than 4.3, else false.
570 Returns true, if zsh version is equal or greater than 4.3.3, else false.
573 Returns true, if running on darwin, else false.
576 Returns true, if running on a grml system, else false.
579 Returns true, if running on a grml system from a live cd, else false.
582 Returns true, if run on grml-small, else false.
585 Changes every occurrence of the string iso885915 or ISO885915 in
586 environment variables to UTF-8.
589 Returns true, if run within an utf environment, else false.
592 Shows the zshall manpage and jumps to the first match of the regular
593 expression optionally given as argument (Needs qma(1)).
596 Creates directory including parent directories, if necessary. Then changes
597 current working directory to it.
599 : **minimal-shell()**
600 Spawns a minimally set up MirBSD Korn shell. It references no files in /usr,
601 so that file system can be unmounted.
604 Lists files in current directory, which have been modified within the
605 last N days. N is an integer to be passed as first and only argument.
606 If no argument is specified N is set to 1.
609 A helper function for the "e" glob qualifier to list all files newer
610 than a reference file.
614 % NTREF=/reference/file
617 % ls -l *(e:'nt /reference/file':)
621 Evaluates a perl expression; useful as command line
622 calculator, therefore also available as "calc".
625 Runs a command in $SHELL with profiling enabled (See startup variable
626 ZSH_PROFILE_RC above).
629 Reloads functions given as parameters.
632 Creates an alias whith sudo prepended, if $EUID is not zero. Run "salias -h"
633 for details. See also xunfunction() below.
636 Reimplementation of the csh(1) builtin setenv.
639 Lists the contents of a (compressed) archive with the appropriate programs.
640 The choice is made along the filename extension.
642 : **simple-extract()**
643 Tries to uncompress/unpack given files with the appropriate programs. If an URI
644 starting with https, http or ftp is provided simple-extract tries to download
645 and then uncompress/unpack the file. The choice is made along the filename
646 ending. simple-extract will not delete the original archive (even on .gz,.bz2 or
647 .xz) unless you use the '-d' option.
650 Prints details of symlinks given as arguments.
652 : **smartcompress()**
653 Compresses/archives the file given as first parameter. Takes an optional
654 second argument, which denotes the compression/archive type as typical
655 filename extension; defaults to "tar.gz".
658 Creates directory named shots in user's home directory, if it does not yet
659 exist and changes current working directory to it. Then sleeps 5 seconds,
660 so you have plenty of time to switch desktops/windows. Then makes a screenshot
661 of the current desktop. The result is stored in ~/shots to a timestamped
664 : **ssl-cert-fingerprints**
665 Prints the SHA512, SHA256, SHA1 and MD5 digest of a x509 certificate.
666 First and only parameter must be a file containing a certificate. Use
667 /dev/stdin as file if you want to pipe a certificate to these
671 Prints all information of a x509 certificate including the SHA512,
672 SHA256, SHA1 and MD5 digests. First and only parameter must be a file
673 containing a certificate. Use /dev/stdin as file if you want to pipe a
674 certificate to this function.
676 : **ssl-cert-sha512(), ssl-cert-sha256(), ssl-cert-sha1(), ssl-cert-md5()**
677 Prints the SHA512, SHA256, SHA1 respective MD5 digest of a x509
678 certificate. First and only parameter must be a file containing a
679 certificate. Use /dev/stdin as file if you want to pipe a certificate
682 : **Start(), Restart(), Stop(), Force-Reload(), Reload()**
683 Functions for controlling daemons.
690 Translates a word from german to english (-D) or vice versa (-E).
693 Shows upstreams changelog of a given package in $PAGER.
696 Works around the "print -l ${(u)foo}"-limitation on zsh older than 4.2.
699 Changes every occurrence of the string UTF-8 or utf-8 in environment
700 variables to iso885915.
703 Wrapper for vim(1). It tries to set the title and hands vim the environment
704 variable VIM_OPTIONS on the command line. So the user may define command
705 line options, she always wants, in her .zshrc.local.
708 Searches the history for a given pattern and lists the results by date.
709 The first argument is the search pattern. The second and third ones are
710 optional and denote a search range (default: -100).
713 Tries to cat(1) file(s) given as parameter(s). Always returns true.
714 See also xunfunction() below.
717 Tries to source the file(s) given as parameter(s). Always returns true.
718 See zshbuiltins(1) for a detailed description of the source command.
719 See also xunfunction() below.
722 Changes the title of xterm window from within screen(1). Run without
723 arguments for details.
726 Removes the functions salias, xcat, xsource, xunfunction and zrcautoload.
729 Wrapper around the autoload builtin. Loads the definitions of functions
730 from the file given as argument. Searches $fpath for the file. See also
734 Sources /etc/zsh/zshrc.local and ${HOME}/.zshrc.local. These are the files
735 where own modifications should go. See also zshbuiltins(1) for a description
736 of the source command.
740 //grmlzshrc// comes with a wide array of predefined aliases to ease the user's
741 life. A few aliases (like those involving //grep// or //ls//) use the option
742 //--color=auto// for colourizing output. That option is part of **GNU**
743 implementations of these tools, and will only be used if such an implementation
746 : **acp** (//apt-cache policy//)
747 With no arguments prints out the priorities of each source. If a package name
748 is given, it displays detailed information about the priority selection of the
751 : **acs** (//apt-cache search//)
752 Searches debian package lists for the regular expression provided as argument.
753 The search includes package names and descriptions. Prints out name and short
754 description of matching packages.
756 : **acsh** (//apt-cache show//)
757 Shows the package records for the packages provided as arguments.
759 : **adg** (//apt-get dist-upgrade//)
760 Performs an upgrade of all installed packages. Also tries to automatically
761 handle changing dependencies with new versions of packages. As this may change
762 the install status of (or even remove) installed packages, it is potentially
763 dangerous to use dist-upgrade; invoked by sudo, if necessary.
765 : **ag** (//apt-get upgrade//)
766 Downloads and installs the newest versions of all packages currently installed
767 on the system. Under no circumstances are currently installed packages removed,
768 or packages not already installed retrieved and installed. New versions of
769 currently installed packages that cannot be upgraded without changing the install
770 status of another package will be left at their current version. An update must
771 be performed first (see au below); run by sudo, if necessary.
773 : **agi** (//apt-get install//)
774 Downloads and installs or upgrades the packages given on the command line.
775 If a hyphen is appended to the package name, the identified package will be
776 removed if it is installed. Similarly a plus sign can be used to designate a
777 package to install. This may be useful to override decisions made by apt-get's
778 conflict resolution system.
779 A specific version of a package can be selected for installation by following
780 the package name with an equals and the version of the package to select. This
781 will cause that version to be located and selected for install. Alternatively a
782 specific distribution can be selected by following the package name with a slash
783 and the version of the distribution or the Archive name (stable, testing, unstable).
784 Gets invoked by sudo, if user id is not 0.
786 : **ati** (//aptitude install//)
787 Aptitude is a terminal-based package manager with a command line mode similar to
788 apt-get (see agi above); invoked by sudo, if necessary.
790 : **au** (//apt-get update//)
791 Resynchronizes the package index files from their sources. The indexes of
792 available packages are fetched from the location(s) specified in
793 /etc/apt/sources.list. An update should always be performed before an
794 upgrade or dist-upgrade; run by sudo, if necessary.
796 : **calc** (//peval//)
797 Evaluates a perl expression (see peval() above); useful as a command line
800 : **CH** (//./configure --help//)
801 Lists available compilation options for building program from source.
803 : **cmplayer** (//mplayer -vo fbdev//)
804 Video player with framebuffer as video output device, so you can watch
805 videos on a virtual tty. Hint: Using fbdev2 allows you to use the shell
806 while watching a movie.
808 : **CO** (//./configure//)
809 Prepares compilation for building program from source.
811 : **cp** (//nocorrect cp//)
812 cp(1) without spelling correction.
814 : **da** (//du -sch//)
815 Prints the summarized disk usage of the arguments as well as a grand total
816 in human readable format.
818 : **dbp** (//dpkg-buildpackage//)
819 Builds binary or source packages from sources (See: dpkg-buildpackage(1)).
821 : **debs-by-size** (//grep-status -FStatus -sInstalled-Size,Package -n "install ok installed" | paste -sd " \n" | sort -rn//)
822 Prints installed Packages sorted by size (descending).
824 : **default** (//echo -en [ escape sequence ]//)
825 Sets font of xterm to "-misc-fixed-medium-r-normal-*-*-140-*-*-c-*-iso8859-15"
826 using escape sequence.
828 : **dir** (//ls -lSrah//)
829 Lists files (including dot files) sorted by size (biggest last) in long and
830 human readable output format.
832 : **fblinks** (//links2 -driver fb//)
833 A Web browser on the framebuffer device. So you can browse images and click
834 links on the virtual tty.
836 : **fbmplayer** (//mplayer -vo fbdev -fs -zoom//)
837 Fullscreen Video player with the framebuffer as video output device. So you
838 can watch videos on a virtual tty.
841 Revision control system by Linus Torvalds.
843 : **ge** (//grep-excuses//)
844 Searches the testing excuses files for a specific maintainer (See:
847 : **grep** (//grep --color=auto//)
848 Shows grep output in nice colors, if available.
850 : **GREP** (//grep -i --color=auto//)
851 Case insensitive grep with colored output.
853 : **grml-rebuildfstab** (//rebuildfstab -v -r -config//)
854 Scans for new devices and updates /etc/fstab according to the findings.
856 : **grml-version** (//cat /etc/grml_version//)
857 Prints version of running grml.
859 : **hbp** (//hg-buildpackage//)
860 Helper program to maintain Debian packages with mercurial.
862 : **http** (//python -m SimpleHTTPServer//)
863 Basic HTTP server implemented in python. Listens on port 8000/tcp and
864 serves current directory. Implements GET and HEAD methods.
866 : **insecscp** (//scp -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"//)
867 scp with possible man-in-the-middle attack enabled. This is convenient, if the targets
868 host key changes frequently, for example on virtualized test- or development-systems.
869 To be used only inside trusted networks, of course.
871 : **insecssh** (//ssh -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"//)
872 ssh with possible man-in-the-middle attack enabled
873 (for an explanation see insecscp above).
875 : **help-zshglob** (//H-Glob()//)
876 Runs the function H-Glob() to expand or explain wildcards.
878 : **hide** (//echo -en [ escape sequence ]//)
879 Tries to hide xterm window using escape sequence.
881 : **hidiff** (//histring -fE '^Comparing files .*|^diff .*' | histring -c yellow -fE '^\-.*' | histring -c green -fE '^\+.*'//)
882 If histring(1) is installed, highlight important stuff in diff(1) output.
884 : **huge** (//echo -en [ escape sequence ]//)
885 Sets huge font in xterm ("-misc-fixed-medium-r-normal-*-*-210-*-*-c-*-iso8859-15")
886 using escape sequence.
888 : **j** (//jobs -l//)
889 Prints status of jobs in the current shell session in long format.
891 : **l** (//ls -lF --color=auto//)
892 Lists files in long output format with indicator for filetype appended
893 to filename. If the terminal supports it, with colored output.
895 : **la** (//ls -la --color=auto//)
896 Lists files in long colored output format. Including file names
899 : **lad** (//ls -d .*(/)//)
900 Lists the dot directories (not their contents) in current directory.
902 : **large** (//echo -en [ escape sequence ]//)
903 Sets large font in xterm ("-misc-fixed-medium-r-normal-*-*-150-*-*-c-*-iso8859-15")
904 using escape sequence.
906 : **lh** (//ls -hAl --color=auto//)
907 Lists files in long and human readable output format in nice colors,
908 if available. Includes file names starting with "." except "." and
911 : **ll** (//ls -l --color=auto//)
912 Lists files in long colored output format.
914 : **llog** (//$PAGER /var/log/syslog//)
915 Opens syslog in pager.
917 : **ls** (//ls -b -CF --color=auto//)
918 Lists directory printing octal escapes for nongraphic characters.
919 Entries are listed by columns and an indicator for file type is appended
920 to each file name. Additionally the output is colored, if the terminal
923 : **lsa** (//ls -a .*(.)//)
924 Lists dot files in current working directory.
926 : **lsbig** (//ls -flh *(.OL[1,10])//)
927 Displays the ten biggest files (long and human readable output format).
929 : **lsd** (//ls -d *(/)//)
932 : **lse** (//ls -d *(/^F)//)
933 Shows empty directories.
935 : **lsl** (//ls -l *(@)//)
936 Lists symbolic links in current directory.
938 : **lsnew** (//ls -rl *(D.om[1,10])//)
939 Displays the ten newest files (long output format).
941 : **lsold** (//ls -rtlh *(D.om[1,10])//)
942 Displays the ten oldest files (long output format).
944 : **lss** (//ls -l *(s,S,t)//)
945 Lists files in current directory that have the setuid, setgid or sticky bit
948 : **lssmall** (//ls -Srl *(.oL[1,10])//)
949 Displays the ten smallest files (long output format).
951 : **lsw** (//ls -ld *(R,W,X.^ND/)//)
952 Displays all files which are world readable and/or world writable and/or
953 world executable (long output format).
955 : **lsx** (//ls -l *(*)//)
956 Lists only executable files.
958 : **md** (//mkdir -p//)
959 Creates directory including parent directories, if necessary
961 : **mdstat** (//cat /proc/mdstat//)
962 Lists all active md (i.e. linux software raid) devices with some information
965 : **medium** (//echo -en [ escape sequence ]//)
966 Sets medium sized font
967 ("-misc-fixed-medium-r-normal--13-120-75-75-c-80-iso8859-15") in xterm
968 using escape sequence.
970 : **mkdir** (//nocorrect mkdir//)
971 mkdir(1) without spelling correction.
973 : **mq** (//hg -R $(readlink -f $(hg root)/.hg/patches)//)
974 Executes the commands on the versioned patch queue from current repository.
976 : **mv** (//nocorrect mv//)
977 mv(1) without spelling correction.
980 Short rmdir(1) (remove directory).
982 : **rm** (//nocorrect rm//)
983 rm(1) without spelling correction.
985 : **rmcdir** (//'cd ..; rmdir $OLDPWD || cd $OLDPWD//)
986 rmdir current working directory
988 : **screen** (///usr/bin/screen -c ${HOME}/.screenrc//)
989 If invoking user is root, starts screen session with /etc/grml/screenrc
990 as config file. If invoked by a regular user, start a screen session
991 with users .screenrc config if it exists, else use /etc/grml/screenrc_grml
994 : **rw-** (//chmod 600//)
995 Grants read and write permission of a file to the owner and nobody else.
997 : **rwx** (//chmod 700//)
998 Grants read, write and execute permission of a file to the owner and nobody
1001 : **r--** (//chmod 644//)
1002 Grants read and write permission of a file to the owner and read-only to
1005 : **r-x** (//chmod 755//)
1006 Grants read, write and execute permission of a file to the owner and
1007 read-only plus execute permission to anybody else.
1009 : **S** (//screen//)
1010 Short for screen(1).
1015 : **semifont** (//echo -en [ escape sequence ]//)
1016 Sets font of xterm to
1017 "-misc-fixed-medium-r-semicondensed-*-*-120-*-*-*-*-iso8859-15" using
1020 : **small** (//echo -en [ escape sequence ]//)
1021 Sets small xterm font ("6x10") using escape sequence.
1023 : **smartfont** (//echo -en [ escape sequence ]//)
1024 Sets font of xterm to "-artwiz-smoothansi-*-*-*-*-*-*-*-*-*-*-*-*" using
1027 : **su** (//sudo su//)
1028 If user is running a grml live-CD, dont ask for any password, if she
1031 : **term2iso** (//echo 'Setting terminal to iso mode' ; print -n '\e%@'//)
1032 Sets mode from UTF-8 to ISO 2022 (See:
1033 http://www.cl.cam.ac.uk/~mgk25/unicode.html#term).
1035 : **term2utf** (//echo 'Setting terminal to utf-8 mode'; print -n '\e%G'//)
1036 Sets mode from ISO 2022 to UTF-8 (See:
1037 http://www.cl.cam.ac.uk/~mgk25/unicode.html#term).
1039 : **tiny** (//echo -en [ escape sequence ]//)
1040 Sets tiny xterm font
1041 ("-misc-fixed-medium-r-normal-*-*-80-*-*-c-*-iso8859-15") using escape
1044 : **tlog** (//tail -f /var/log/syslog//)
1045 Prints syslog continuously (See tail(1)).
1047 : **top10** (//print -l ? ${(o)history%% *} | uniq -c | sort -nr | head -n 10//)
1048 Prints the ten most used shell commands.
1050 : **truec** (//truecrypt [ mount options ]//)
1051 Mount a truecrypt volume with some reasonable mount options
1052 ("rw,sync,dirsync,users,uid=1000,gid=users,umask=077" and "utf8", if
1055 : **up** (//aptitude update ; aptitude safe-upgrade//)
1056 Performs a system update followed by a system upgrade using aptitude; run
1057 by sudo, if necessary. See au and ag above.
1059 : **url-quote** (//autoload -U url-quote-magic ; zle -N self-insert url-quote-magic//)
1060 After calling, characters of URLs as typed get automatically escaped, if necessary, to
1061 protect them from the shell.
1063 : **0** (//return 0//)
1064 Gives a clean prompt (i.e. without $?).
1066 : **$(uname -r)-reboot** (//kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)"//)
1067 Reboots using kexec(8) and thus reduces boot time by skipping hardware initialization of BIOS/firmware.
1069 : **...** (//cd ../..///)
1070 Changes current directory two levels higher.
1072 : **?** (//qma zshall//)
1073 Runs the grml script qma (quick manual access) to build the collected man
1074 pages for the z-shell. This compressed file is kept at
1075 ~/man/zshall.txt.lzo Once it is built, the second use of the alias '?' is
1076 fast. See "man qma" for further information.
1080 This is a set of files, that - if they exist - can be used to customize the
1081 behaviour of //grmlzshrc//.
1084 Sourced at the very beginning of //grmlzshrc//. Among other things, it can
1085 be used to permantenly change //grmlzshrc//'s STARTUP VARIABLES (see above):
1088 # show battery status in RPROMPT
1090 # always load the complete setup, even for root
1091 GRML_ALWAYS_LOAD_ALL=1
1095 Sourced right before loading //grmlzshrc// is finished. There is a global
1096 version of this file (/etc/zsh/zshrc.local) which is sourced before the
1100 Directory listing for persistent dirstack (see above).
1102 : **.important_commands**
1103 List of commands, used by persistent history (see above).
1106 = INSTALLATION ON NON-DEBIAN SYSTEMS =
1107 On Debian systems (http://www.debian.org) - and possibly Ubuntu
1108 (http://www.ubuntu.com) and similar systems - it is very easy to get
1109 //grmlzshrc// via grml's .deb repositories.
1111 On non-debian systems, that is not an option, but all is not lost:
1114 % wget -O .zshrc http://git.grml.org/f/grml-etc-core/etc/zsh/zshrc
1117 If you would also like to get seperate function files (which you can put into
1118 your **$fpath**), you can browse and download them at:
1120 http://git.grml.org/?p=grml-etc-core.git;a=tree;f=usr_share_grml/zsh;hb=HEAD
1122 = ZSH REFCARD TAGS =
1123 If you read //grmlzshrc//'s code you may notice strange looking comments in
1124 it. These are there for a purpose. grml's zsh-refcard is automatically
1125 generated from the contents of the actual configuration file. However, we need
1126 a little extra information on which comments and what lines of code to take
1127 into account (and for what purpose).
1129 Here is what they mean:
1131 List of tags (comment types) used:
1133 Next line contains an important alias, that should be included in the
1134 grml-zsh-refcard. (placement tag: @@INSERT-aliases@@)
1137 Next line contains the beginning of an important function. (placement
1138 tag: @@INSERT-functions@@)
1141 Next line contains an important variable. (placement tag:
1142 @@INSERT-variables@@)
1145 Next line contains an important keybinding. (placement tag:
1146 @@INSERT-keybindings@@)
1149 Hashed directories list generation: //start//: denotes the start of a list of
1150 'hash -d' definitions. //end//: denotes its end. (placement tag:
1151 @@INSERT-hasheddirs@@)
1154 Abbreviation expansion list generation: //start//: denotes the beginning of
1155 abbreviations. //end//: denotes their end.
1157 Lines within this section that end in '#d .*' provide extra documentation to
1158 be included in the refcard. (placement tag: @@INSERT-abbrev@@)
1161 This tag allows you to manually generate refcard entries for code lines that
1162 are hard/impossible to parse.
1166 #m# k ESC-h Call the run-help function
1169 That would add a refcard entry in the keybindings table for 'ESC-h' with the
1172 So the syntax is: #m# <section> <argument> <comment>
1175 This tag lets you insert entries to the 'other' hash. Generally, this should
1176 not be used. It is there for things that cannot be done easily in another way.
1177 (placement tag: @@INSERT-other-foobar@@)
1180 All of these tags (except for m and o) take two arguments, the first
1181 within the tag, the other after the tag:
1183 #<tag><section># <comment>
1185 Where <section> is really just a number, which are defined by the @secmap
1186 array on top of 'genrefcard.pl'. The reason for numbers instead of names is,
1187 that for the reader, the tag should not differ much from a regular comment.
1188 For zsh, it is a regular comment indeed. The numbers have got the following
1213 So, the following will add an entry to the 'functions' table in the 'system'
1214 section, with a (hopefully) descriptive comment:
1217 #f1# Edit an alias via zle
1221 It will then show up in the @@INSERT-aliases-system@@ replacement tag that can
1222 be found in 'grml-zsh-refcard.tex.in'. If the section number is omitted, the
1223 'default' section is assumed. Furthermore, in 'grml-zsh-refcard.tex.in'
1224 @@INSERT-aliases@@ is exactly the same as @@INSERT-aliases-default@@. If you
1225 want a list of **all** aliases, for example, use @@INSERT-aliases-all@@.
1229 If you want to help to improve grml's zsh setup, clone the grml-etc-core
1230 repository from git.grml.org:
1232 ``` % git clone git://git.grml.org/grml-etc-core.git
1234 Make your changes, commit them; use '**git format-patch**' to create a series
1235 of patches and send those to the following address via '**git send-email**':
1237 ``` grml-etc-core@grml.org
1239 Doing so makes sure the right people get your patches for review and
1244 This manual page is the **reference** manual for //grmlzshrc//.
1246 That means that in contrast to the existing refcard it should document **every**
1247 aspect of the setup.
1249 This manual is currently not complete. If you want to help improving it, visit
1250 the following pages:
1252 http://wiki.grml.org/doku.php?id=zshrcmanual
1254 http://lists.mur.at/pipermail/grml/2009-August/004609.html
1256 Contributions are highly welcome.
1260 This manpage was written by Frank Terbeck <ft@grml.org>, Joerg Woelke
1261 <joewoe@fsmail.de>, Maurice McCarthy <manselton@googlemail.com> and Axel
1262 Beckert <abe@deuxchevaux.org>.
1266 Copyright (c) 2009-2011 Grml project <http://grml.org>
1268 This manpage is distributed under the terms of the GPL version 2.
1270 Most parts of grml's zshrc are distributed under the terms of GPL v2, too,
1271 except for **accept-line()** which are distributed under the same conditions
1272 as zsh itself (which is BSD-like).