1 # Filename: /etc/zsh/zshrc
2 # Purpose: config file for zsh (z shell)
3 # Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
4 # Bug-Reports: see http://grml.org/bugs/
5 # License: This file is licensed under the GPL v2.
6 ################################################################################
7 # This file is sourced only for interactive shells. It
8 # should contain commands to set up aliases, functions,
9 # options, key bindings, etc.
11 # Global Order: zshenv, zprofile, zshrc, zlogin
12 ################################################################################
15 # If you are using this file as your ~/.zshrc file, please use ~/.zshrc.pre
16 # and ~/.zshrc.local for your own customisations. The former file is read
17 # before ~/.zshrc, the latter is read after it. Also, consider reading the
18 # refcard and the reference manual for this setup, both available from:
19 # <http://grml.org/zsh/>
22 # If you want to help to improve grml's zsh setup, clone the grml-etc-core
23 # repository from git.grml.org:
24 # git clone git://git.grml.org/grml-etc-core.git
26 # Make your changes, commit them; use 'git format-patch' to create a series
27 # of patches and send those to the following address via 'git send-email':
28 # grml-etc-core@grml.org
30 # Doing so makes sure the right people get your patches for review and
33 # zsh-refcard-tag documentation:
34 # You may notice strange looking comments in this file.
35 # These are there for a purpose. grml's zsh-refcard can now be
36 # automatically generated from the contents of the actual configuration
37 # file. However, we need a little extra information on which comments
38 # and what lines of code to take into account (and for what purpose).
40 # Here is what they mean:
42 # List of tags (comment types) used:
43 # #a# Next line contains an important alias, that should
44 # be included in the grml-zsh-refcard.
45 # (placement tag: @@INSERT-aliases@@)
46 # #f# Next line contains the beginning of an important function.
47 # (placement tag: @@INSERT-functions@@)
48 # #v# Next line contains an important variable.
49 # (placement tag: @@INSERT-variables@@)
50 # #k# Next line contains an important keybinding.
51 # (placement tag: @@INSERT-keybindings@@)
52 # #d# Hashed directories list generation:
53 # start denotes the start of a list of 'hash -d'
55 # end denotes its end.
56 # (placement tag: @@INSERT-hasheddirs@@)
57 # #A# Abbreviation expansion list generation:
58 # start denotes the beginning of abbreviations.
59 # end denotes their end.
60 # Lines within this section that end in '#d .*' provide
61 # extra documentation to be included in the refcard.
62 # (placement tag: @@INSERT-abbrev@@)
63 # #m# This tag allows you to manually generate refcard entries
64 # for code lines that are hard/impossible to parse.
66 # #m# k ESC-h Call the run-help function
67 # That would add a refcard entry in the keybindings table
68 # for 'ESC-h' with the given comment.
69 # So the syntax is: #m# <section> <argument> <comment>
70 # #o# This tag lets you insert entries to the 'other' hash.
71 # Generally, this should not be used. It is there for
72 # things that cannot be done easily in another way.
73 # (placement tag: @@INSERT-other-foobar@@)
75 # All of these tags (except for m and o) take two arguments, the first
76 # within the tag, the other after the tag:
78 # #<tag><section># <comment>
80 # Where <section> is really just a number, which are defined by the
81 # @secmap array on top of 'genrefcard.pl'. The reason for numbers
82 # instead of names is, that for the reader, the tag should not differ
83 # much from a regular comment. For zsh, it is a regular comment indeed.
84 # The numbers have got the following meanings:
93 # So, the following will add an entry to the 'functions' table in the
94 # 'system' section, with a (hopefully) descriptive comment:
95 # #f1# Edit an alias via zle
98 # It will then show up in the @@INSERT-aliases-system@@ replacement tag
99 # that can be found in 'grml-zsh-refcard.tex.in'.
100 # If the section number is omitted, the 'default' section is assumed.
101 # Furthermore, in 'grml-zsh-refcard.tex.in' @@INSERT-aliases@@ is
102 # exactly the same as @@INSERT-aliases-default@@. If you want a list of
103 # *all* aliases, for example, use @@INSERT-aliases-all@@.
106 # just execute 'ZSH_PROFILE_RC=1 zsh' and run 'zprof' to get the details
107 if [[ $ZSH_PROFILE_RC -gt 0 ]] ; then
111 # load .zshrc.pre to give the user the chance to overwrite the defaults
112 [[ -r ${ZDOTDIR:-${HOME}}/.zshrc.pre ]] && source ${ZDOTDIR:-${HOME}}/.zshrc.pre
114 # check for version/system
115 # check for versions (compatibility reasons)
117 [[ $ZSH_VERSION == <4->* ]] && return 0
122 [[ $ZSH_VERSION == 4.<1->* || $ZSH_VERSION == <5->* ]] && return 0
127 [[ $ZSH_VERSION == 4.<2->* || $ZSH_VERSION == <5->* ]] && return 0
132 [[ $ZSH_VERSION == 4.2.<5->* || $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0
137 [[ $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0
142 [[ $ZSH_VERSION == 4.3.<3->* || $ZSH_VERSION == 4.<4->* \
143 || $ZSH_VERSION == <5->* ]] && return 0
148 [[ $ZSH_VERSION == 4.3.<7->* || $ZSH_VERSION == 4.<4->* \
149 || $ZSH_VERSION == <5->* ]] && return 0
154 [[ $ZSH_VERSION == 4.3.<9->* || $ZSH_VERSION == 4.<4->* \
155 || $ZSH_VERSION == <5->* ]] && return 0
159 #f1# Checks whether or not you're running grml
161 [[ -f /etc/grml_version ]] && return 0
165 #f1# Checks whether or not you're running a grml cd
166 function isgrmlcd () {
167 [[ -f /etc/grml_cd ]] && return 0
172 #f1# Checks whether or not you're running grml-small
173 function isgrmlsmall () {
174 if [[ ${${${(f)"$(</etc/grml_version)"}%% *}##*-} == 'small' ]]; then
180 function isgrmlsmall () { return 1 }
183 GRML_OSTYPE=$(uname -s)
185 function islinux () {
186 [[ $GRML_OSTYPE == "Linux" ]]
189 function isdarwin () {
190 [[ $GRML_OSTYPE == "Darwin" ]]
193 function isfreebsd () {
194 [[ $GRML_OSTYPE == "FreeBSD" ]]
197 function isopenbsd () {
198 [[ $GRML_OSTYPE == "OpenBSD" ]]
201 function issolaris () {
202 [[ $GRML_OSTYPE == "SunOS" ]]
205 #f1# are we running within an utf environment?
206 function isutfenv () {
207 case "$LANG $CHARSET $LANGUAGE" in
214 # check for user, if not running as root set $SUDO to sudo
215 (( EUID != 0 )) && SUDO='sudo' || SUDO=''
217 # change directory to home on first invocation of zsh
218 # important for rungetty -> autologin
219 # Thanks go to Bart Schaefer!
220 isgrml && function checkhome () {
221 if [[ -z "$ALREADY_DID_CD_HOME" ]] ; then
222 export ALREADY_DID_CD_HOME=$HOME
227 # check for zsh v3.1.7+
229 if ! [[ ${ZSH_VERSION} == 3.1.<7->* \
230 || ${ZSH_VERSION} == 3.<2->.<->* \
231 || ${ZSH_VERSION} == <4->.<->* ]] ; then
234 printf '-!- In this configuration we try to make use of features, that only\n'
235 printf '-!- require version 3.1.7 of the shell; That way this setup can be\n'
236 printf '-!- used with a wide range of zsh versions, while using fairly\n'
237 printf '-!- advanced features in all supported versions.\n'
239 printf '-!- However, you are running zsh version %s.\n' "$ZSH_VERSION"
241 printf '-!- While this *may* work, it might as well fail.\n'
242 printf '-!- Please consider updating to at least version 3.1.7 of zsh.\n'
244 printf '-!- DO NOT EXPECT THIS TO WORK FLAWLESSLY!\n'
245 printf '-!- If it does today, you'\''ve been lucky.\n'
247 printf '-!- Ye been warned!\n'
250 function zstyle () { : }
253 # autoload wrapper - use this one instead of autoload directly
254 # We need to define this function as early as this, because autoloading
255 # 'is-at-least()' needs it.
256 function zrcautoload () {
264 for fdir in ${fpath} ; do
265 [[ -e ${fdir}/${ffile} ]] && (( ffound = 1 ))
268 (( ffound == 0 )) && return 1
269 if [[ $ZSH_VERSION == 3.1.<6-> || $ZSH_VERSION == <4->* ]] ; then
270 autoload -U ${ffile} || return 1
272 autoload ${ffile} || return 1
277 # The following is the ‘add-zsh-hook’ function from zsh upstream. It is
278 # included here to make the setup work with older versions of zsh (prior to
279 # 4.3.7) in which this function had a bug that triggers annoying errors during
280 # shell startup. This is exactly upstreams code from f0068edb4888a4d8fe94def,
281 # with just a few adjustments in coding style to make the function look more
282 # compact. This definition can be removed as soon as we raise the minimum
283 # version requirement to 4.3.7 or newer.
284 function add-zsh-hook () {
285 # Add to HOOK the given FUNCTION.
286 # HOOK is one of chpwd, precmd, preexec, periodic, zshaddhistory,
287 # zshexit, zsh_directory_name (the _functions subscript is not required).
289 # With -d, remove the function from the hook instead; delete the hook
290 # variable if it is empty.
292 # -D behaves like -d, but pattern characters are active in the function
293 # name, so any matching function will be deleted from the hook.
295 # Without -d, the FUNCTION is marked for autoload; -U is passed down to
296 # autoload if that is given, as are -z and -k. (This is harmless if the
297 # function is actually defined inline.)
301 chpwd precmd preexec periodic zshaddhistory zshexit
304 local usage="Usage: $0 hook function\nValid hooks are:\n $hooktypes"
307 integer del list help
308 while getopts "dDhLUzk" opt; do
314 ([Uzk]) autoopts+=(-$opt) ;;
318 shift $(( OPTIND - 1 ))
320 typeset -mp "(${1:-${(@j:|:)hooktypes}})_functions"
322 elif (( help || $# != 2 || ${hooktypes[(I)$1]} == 0 )); then
323 print -u$(( 2 - help )) $usage
324 return $(( 1 - help ))
326 local hook="${1}_functions"
329 # delete, if hook is set
330 if (( ${(P)+hook} )); then
331 if (( del == 2 )); then
332 set -A $hook ${(P)hook:#${~fn}}
334 set -A $hook ${(P)hook:#$fn}
336 # unset if no remaining entries --- this can give better
337 # performance in some cases
338 if (( ! ${(P)#hook} )); then
343 if (( ${(P)+hook} )); then
344 if (( ${${(P)hook}[(I)$fn]} == 0 )); then
345 set -A $hook ${(P)hook} $fn
350 autoload $autoopts -- $fn
354 # Load is-at-least() for more precise version checks Note that this test will
355 # *always* fail, if the is-at-least function could not be marked for
357 zrcautoload is-at-least || function is-at-least () { return 1 }
359 # set some important options (as early as possible)
361 # append history list to the history file; this is the default but we make sure
362 # because it's required for share_history.
363 setopt append_history
365 # import new commands from the history file also in other zsh-session
366 is4 && setopt share_history
368 # save each command's beginning timestamp and the duration to the history file
369 setopt extended_history
371 # If a new command line being added to the history list duplicates an older
372 # one, the older command is removed from the list
373 is4 && setopt histignorealldups
375 # remove command lines from the history list when the first character on the
377 setopt histignorespace
379 # if a command is issued that can't be executed as a normal command, and the
380 # command is the name of a directory, perform the cd command to that directory.
383 # in order to use #, ~ and ^ for filename generation grep word
384 # *~(*.gz|*.bz|*.bz2|*.zip|*.Z) -> searches for word not in compressed files
385 # don't forget to quote '^', '~' and '#'!
388 # display PID when suspending processes as well
391 # report the status of backgrounds jobs immediately
394 # whenever a command completion is attempted, make sure the entire command path
398 # not just at the end
399 setopt completeinword
401 # Don't send SIGHUP to background processes when the shell exits.
404 # make cd push the old directory onto the directory stack.
410 # don't push the same dir twice.
411 setopt pushd_ignore_dups
413 # * shouldn't match dotfiles. ever.
416 # use zsh style word splitting
419 # don't error out when unset parameters are used
422 # setting some default values
425 NOPRECMD=${NOPRECMD:-0}
426 COMMAND_NOT_FOUND=${COMMAND_NOT_FOUND:-0}
427 GRML_ZSH_CNF_HANDLER=${GRML_ZSH_CNF_HANDLER:-/usr/share/command-not-found/command-not-found}
428 GRML_DISPLAY_BATTERY=${GRML_DISPLAY_BATTERY:-${BATTERY:-0}}
429 GRMLSMALL_SPECIFIC=${GRMLSMALL_SPECIFIC:-1}
430 ZSH_NO_DEFAULT_LOCALE=${ZSH_NO_DEFAULT_LOCALE:-0}
432 typeset -ga ls_options
433 typeset -ga grep_options
435 # Colors on GNU ls(1)
436 if ls --color=auto / >/dev/null 2>&1; then
437 ls_options+=( --color=auto )
438 # Colors on FreeBSD and OSX ls(1)
439 elif ls -G / >/dev/null 2>&1; then
443 # Natural sorting order on GNU ls(1)
444 # OSX and IllumOS have a -v option that is not natural sorting
445 if ls --version |& grep -q 'GNU' >/dev/null 2>&1 && ls -v / >/dev/null 2>&1; then
449 # Color on GNU and FreeBSD grep(1)
450 if grep --color=auto -q "a" <<< "a" >/dev/null 2>&1; then
451 grep_options+=( --color=auto )
455 # this function checks if a command exists and returns either true
456 # or false. This avoids using 'which' and 'whence', which will
457 # avoid problems with aliases for which on certain weird systems. :-)
458 # Usage: check_com [-c|-g] word
459 # -c only checks for external commands
460 # -g does the usual tests and also checks for global aliases
461 function check_com () {
463 local -i comonly gatoo
467 if [[ $1 == '-c' ]] ; then
470 elif [[ $1 == '-g' ]] ; then
475 if (( ${#argv} != 1 )) ; then
476 printf 'usage: check_com [-c|-g] <command>\n' >&2
480 if (( comonly > 0 )) ; then
481 (( ${+commands[$1]} )) && return 0
485 if (( ${+commands[$1]} )) \
486 || (( ${+functions[$1]} )) \
487 || (( ${+aliases[$1]} )) \
488 || (( ${+reswords[(r)$1]} )) ; then
492 if (( gatoo > 0 )) && (( ${+galiases[$1]} )) ; then
499 # creates an alias and precedes the command with
500 # sudo if $EUID is not zero.
503 local only=0 ; local multi=0
505 while getopts ":hao" opt; do
510 printf 'usage: salias [-hoa] <alias-expression>\n'
511 printf ' -h shows this help text.\n'
512 printf ' -a replace '\'' ; '\'' sequences with '\'' ; sudo '\''.\n'
513 printf ' be careful using this option.\n'
514 printf ' -o only sets an alias if a preceding sudo would be needed.\n'
517 *) salias -h >&2; return 1 ;;
520 shift "$((OPTIND-1))"
522 if (( ${#argv} > 1 )) ; then
523 printf 'Too many arguments %s\n' "${#argv}"
527 key="${1%%\=*}" ; val="${1#*\=}"
528 if (( EUID == 0 )) && (( only == 0 )); then
529 alias -- "${key}=${val}"
530 elif (( EUID > 0 )) ; then
531 (( multi > 0 )) && val="${val// ; / ; sudo }"
532 alias -- "${key}=sudo ${val}"
538 # Check if we can read given files and source those we can.
539 function xsource () {
540 if (( ${#argv} < 1 )) ; then
541 printf 'usage: xsource FILE(s)...\n' >&2
545 while (( ${#argv} > 0 )) ; do
546 [[ -r "$1" ]] && source "$1"
552 # Check if we can read a given file and 'cat(1)' it.
555 if (( ${#argv} != 1 )) ; then
556 printf 'usage: xcat FILE\n' >&2
560 [[ -r $1 ]] && cat $1
564 # Remove these functions again, they are of use only in these
565 # setup files. This should be called at the end of .zshrc.
566 function xunfunction () {
570 funcs=(salias xcat xsource xunfunction zrcautoload zrcautozle)
571 for func in $funcs ; do
572 [[ -n ${functions[$func]} ]] \
578 # this allows us to stay in sync with grml's zshrc and put own
579 # modifications in ~/.zshrc.local
580 function zrclocal () {
581 xsource "/etc/zsh/zshrc.local"
582 xsource "${ZDOTDIR:-${HOME}}/.zshrc.local"
587 if (( ZSH_NO_DEFAULT_LOCALE == 0 )); then
588 xsource "/etc/default/locale"
591 for var in LANG LC_ALL LC_MESSAGES ; do
592 [[ -n ${(P)var} ]] && export $var
597 if check_com -c vim ; then
599 export EDITOR=${EDITOR:-vim}
601 export EDITOR=${EDITOR:-vi}
605 export PAGER=${PAGER:-less}
608 export MAIL=${MAIL:-/var/mail/$USER}
610 # color setup for ls:
611 check_com -c dircolors && eval $(dircolors -b)
612 # color setup for ls on OS X / FreeBSD:
613 isdarwin && export CLICOLOR=1
614 isfreebsd && export CLICOLOR=1
616 # do MacPorts setup on darwin
617 if isdarwin && [[ -d /opt/local ]]; then
618 # Note: PATH gets set in /etc/zprofile on Darwin, so this can't go into
620 PATH="/opt/local/bin:/opt/local/sbin:$PATH"
621 MANPATH="/opt/local/share/man:$MANPATH"
623 # do Fink setup on darwin
624 isdarwin && xsource /sw/bin/init.sh
626 # load our function and completion directories
627 for fdir in /usr/share/grml/zsh/completion /usr/share/grml/zsh/functions; do
628 fpath=( ${fdir} ${fdir}/**/*(/N) ${fpath} )
631 ffiles=(/usr/share/grml/zsh/functions/**/[^_]*[^~](N.:t))
632 (( ${#ffiles} > 0 )) && autoload -U "${ffiles[@]}"
635 # support colors in less
636 export LESS_TERMCAP_mb=$'\E[01;31m'
637 export LESS_TERMCAP_md=$'\E[01;31m'
638 export LESS_TERMCAP_me=$'\E[0m'
639 export LESS_TERMCAP_se=$'\E[0m'
640 export LESS_TERMCAP_so=$'\E[01;44;33m'
641 export LESS_TERMCAP_ue=$'\E[0m'
642 export LESS_TERMCAP_us=$'\E[01;32m'
647 # report about cpu-/system-/user-time of command if running longer than
651 # watch for everyone but me and root
654 # automatically remove duplicates from these arrays
655 typeset -U path PATH cdpath CDPATH fpath FPATH manpath MANPATH
659 for mod in parameter complist deltochar mathfunc ; do
660 zmodload -i zsh/${mod} 2>/dev/null || print "Notice: no ${mod} available :("
661 done && builtin unset -v mod
663 # autoload zsh modules when they are referenced
665 zmodload -a zsh/stat zstat
666 zmodload -a zsh/zpty zpty
667 zmodload -ap zsh/mapfile mapfile
671 COMPDUMPFILE=${COMPDUMPFILE:-${ZDOTDIR:-${HOME}}/.zcompdump}
672 if zrcautoload compinit ; then
674 zstyle -a ':grml:completion:compinit' arguments tmp
675 compinit -d ${COMPDUMPFILE} "${tmp[@]}" || print 'Notice: no compinit available :('
678 print 'Notice: no compinit available :('
684 # called later (via is4 && grmlcomp)
685 # note: use 'zstyle' for getting current settings
686 # press ^xh (control-x h) for getting tags in context; ^x? (control-x ?) to run complete_debug with trace output
687 function grmlcomp () {
688 # TODO: This could use some additional information
690 # Make sure the completion system is initialised
691 (( ${+_comps} )) || return 1
693 # allow one error for every three characters typed in approximate completer
694 zstyle ':completion:*:approximate:' max-errors 'reply=( $((($#PREFIX+$#SUFFIX)/3 )) numeric )'
696 # don't complete backup files as executables
697 zstyle ':completion:*:complete:-command-::commands' ignored-patterns '(aptitude-*|*\~)'
699 # start menu completion only if it could find no unambiguous initial string
700 zstyle ':completion:*:correct:*' insert-unambiguous true
701 zstyle ':completion:*:corrections' format $'%{\e[0;31m%}%d (errors: %e)%{\e[0m%}'
702 zstyle ':completion:*:correct:*' original true
704 # activate color-completion
705 zstyle ':completion:*:default' list-colors ${(s.:.)LS_COLORS}
707 # format on completion
708 zstyle ':completion:*:descriptions' format $'%{\e[0;31m%}completing %B%d%b%{\e[0m%}'
710 # automatically complete 'cd -<tab>' and 'cd -<ctrl-d>' with menu
711 # zstyle ':completion:*:*:cd:*:directory-stack' menu yes select
713 # insert all expansions for expand completer
714 zstyle ':completion:*:expand:*' tag-order all-expansions
715 zstyle ':completion:*:history-words' list false
718 zstyle ':completion:*:history-words' menu yes
720 # ignore duplicate entries
721 zstyle ':completion:*:history-words' remove-all-dups yes
722 zstyle ':completion:*:history-words' stop yes
724 # match uppercase from lowercase
725 zstyle ':completion:*' matcher-list 'm:{a-z}={A-Z}'
727 # separate matches into groups
728 zstyle ':completion:*:matches' group 'yes'
729 zstyle ':completion:*' group-name ''
731 if [[ "$NOMENU" -eq 0 ]] ; then
732 # if there are more than 5 options allow selecting from a menu
733 zstyle ':completion:*' menu select=5
735 # don't use any menus at all
739 zstyle ':completion:*:messages' format '%d'
740 zstyle ':completion:*:options' auto-description '%d'
742 # describe options in full
743 zstyle ':completion:*:options' description 'yes'
745 # on processes completion complete all user processes
746 zstyle ':completion:*:processes' command 'ps -au$USER'
748 # offer indexes before parameters in subscripts
749 zstyle ':completion:*:*:-subscript-:*' tag-order indexes parameters
751 # provide verbose completion information
752 zstyle ':completion:*' verbose true
754 # recent (as of Dec 2007) zsh versions are able to provide descriptions
755 # for commands (read: 1st word in the line) that it will list for the user
756 # to choose from. The following disables that, because it's not exactly fast.
757 zstyle ':completion:*:-command-:*:' verbose false
759 # set format for warnings
760 zstyle ':completion:*:warnings' format $'%{\e[0;31m%}No matches for:%{\e[0m%} %d'
762 # define files to ignore for zcompile
763 zstyle ':completion:*:*:zcompile:*' ignored-patterns '(*~|*.zwc)'
764 zstyle ':completion:correct:' prompt 'correct to: %e'
766 # Ignore completion functions for commands you don't have:
767 zstyle ':completion::(^approximate*):*:functions' ignored-patterns '_*'
769 # Provide more processes in completion of programs like killall:
770 zstyle ':completion:*:processes-names' command 'ps c -u ${USER} -o command | uniq'
772 # complete manual by their section
773 zstyle ':completion:*:manuals' separate-sections true
774 zstyle ':completion:*:manuals.*' insert-sections true
775 zstyle ':completion:*:man:*' menu yes select
777 # Search path for sudo completion
778 zstyle ':completion:*:sudo:*' command-path /usr/local/sbin \
786 # provide .. as a completion
787 zstyle ':completion:*' special-dirs ..
789 # run rehash on completion so new installed program are found automatically:
790 function _force_rehash () {
791 (( CURRENT == 1 )) && rehash
796 # some people don't like the automatic correction - so run 'NOCOR=1 zsh' to deactivate it
797 if [[ "$NOCOR" -gt 0 ]] ; then
798 zstyle ':completion:*' completer _oldlist _expand _force_rehash _complete _files _ignored
801 # try to be smart about when to use what completer...
803 zstyle -e ':completion:*' completer '
804 if [[ $_last_try != "$HISTNO$BUFFER$CURSOR" ]] ; then
805 _last_try="$HISTNO$BUFFER$CURSOR"
806 reply=(_complete _match _ignored _prefix _files)
808 if [[ $words[1] == (rm|mv) ]] ; then
809 reply=(_complete _files)
811 reply=(_oldlist _expand _force_rehash _complete _ignored _correct _approximate _files)
816 # command for process lists, the local web server details and host completion
817 zstyle ':completion:*:urls' local 'www' '/var/www/' 'public_html'
819 # Some functions, like _apt and _dpkg, are very slow. We can use a cache in
820 # order to speed things up
821 if [[ ${GRML_COMP_CACHING:-yes} == yes ]]; then
822 GRML_COMP_CACHE_DIR=${GRML_COMP_CACHE_DIR:-${ZDOTDIR:-$HOME}/.cache}
823 if [[ ! -d ${GRML_COMP_CACHE_DIR} ]]; then
824 command mkdir -p "${GRML_COMP_CACHE_DIR}"
826 zstyle ':completion:*' use-cache yes
827 zstyle ':completion:*:complete:*' cache-path "${GRML_COMP_CACHE_DIR}"
832 [[ -r ~/.ssh/config ]] && _ssh_config_hosts=(${${(s: :)${(ps:\t:)${${(@M)${(f)"$(<$HOME/.ssh/config)"}:#Host *}#Host }}}:#*[*?]*}) || _ssh_config_hosts=()
833 [[ -r ~/.ssh/known_hosts ]] && _ssh_hosts=(${${${${(f)"$(<$HOME/.ssh/known_hosts)"}:#[\|]*}%%\ *}%%,*}) || _ssh_hosts=()
834 [[ -r /etc/hosts ]] && : ${(A)_etc_hosts:=${(s: :)${(ps:\t:)${${(f)~~"$(</etc/hosts)"}%%\#*}##[:blank:]#[^[:blank:]]#}}} || _etc_hosts=()
842 "$_ssh_config_hosts[@]"
847 zstyle ':completion:*:hosts' hosts $hosts
848 # TODO: so, why is this here?
849 # zstyle '*' hosts $hosts
851 # use generic completion system for programs not yet defined; (_gnu_generic works
852 # with commands that provide a --help option with "standard" gnu-like output.)
853 for compcom in cp deborphan df feh fetchipac gpasswd head hnb ipacsum mv \
855 [[ -z ${_comps[$compcom]} ]] && compdef _gnu_generic ${compcom}
858 # see upgrade function in this file
859 compdef _hosts upgrade
862 # Keyboard setup: The following is based on the same code, we wrote for
863 # debian's setup. It ensures the terminal is in the right mode, when zle is
864 # active, so the values from $terminfo are valid. Therefore, this setup should
865 # work on all systems, that have support for `terminfo'. It also requires the
866 # zsh in use to have the `zsh/terminfo' module built.
868 # If you are customising your `zle-line-init()' or `zle-line-finish()'
869 # functions, make sure you call the following utility functions in there:
871 # - zle-line-init(): zle-smkx
872 # - zle-line-finish(): zle-rmkx
874 # Use emacs-like key bindings by default:
879 ## beginning-of-line OR beginning-of-buffer OR beginning of history
880 ## by: Bart Schaefer <schaefer@brasslantern.com>, Bernhard Tittelbach
881 function beginning-or-end-of-somewhere () {
883 if [[ ( "${LBUFFER[-1]}" == $'\n' && "${WIDGET}" == beginning-of* ) || \
884 ( "${RBUFFER[1]}" == $'\n' && "${WIDGET}" == end-of* ) ]]; then
885 zle .${WIDGET:s/somewhere/buffer-or-history/} "$@"
887 zle .${WIDGET:s/somewhere/line-hist/} "$@"
888 if (( HISTNO != hno )); then
889 zle .${WIDGET:s/somewhere/buffer-or-history/} "$@"
893 zle -N beginning-of-somewhere beginning-or-end-of-somewhere
894 zle -N end-of-somewhere beginning-or-end-of-somewhere
896 # add a command line to the shells history without executing it
897 function commit-to-history () {
898 print -s ${(z)BUFFER}
901 zle -N commit-to-history
903 # only slash should be considered as a word separator:
904 function slash-backward-kill-word () {
905 local WORDCHARS="${WORDCHARS:s@/@}"
907 zle backward-kill-word
909 zle -N slash-backward-kill-word
911 # a generic accept-line wrapper
913 # This widget can prevent unwanted autocorrections from command-name
914 # to _command-name, rehash automatically on enter and call any number
915 # of builtin and user-defined widgets in different contexts.
917 # For a broader description, see:
918 # <http://bewatermyfriend.org/posts/2007/12-26.11-50-38-tooltime.html>
920 # The code is imported from the file 'zsh/functions/accept-line' from
921 # <http://ft.bewatermyfriend.org/comp/zsh/zsh-dotfiles.tar.bz2>, which
922 # distributed under the same terms as zsh itself.
924 # A newly added command will may not be found or will cause false
925 # correction attempts, if you got auto-correction set. By setting the
926 # following style, we force accept-line() to rehash, if it cannot
927 # find the first word on the command line in the $command[] hash.
928 zstyle ':acceptline:*' rehash true
930 function Accept-Line () {
931 setopt localoptions noksharrays
935 local alcontext=${1:-$alcontext}
937 zstyle -a ":acceptline:${alcontext}" actions subs
939 (( ${#subs} < 1 )) && return 0
942 for sub in ${subs} ; do
943 [[ ${sub} == 'accept-line' ]] && sub='.accept-line'
946 (( aldone > 0 )) && break
950 function Accept-Line-getdefault () {
954 zstyle -s ":acceptline:${alcontext}" default_action default_action
955 case ${default_action} in
957 printf ".accept-line"
960 printf ${default_action}
965 function Accept-Line-HandleContext () {
968 default_action=$(Accept-Line-getdefault)
969 zstyle -T ":acceptline:${alcontext}" call_default \
970 && zle ${default_action}
973 function accept-line () {
974 setopt localoptions noksharrays
977 local buf com fname format msg default_action
981 cmdline=(${(z)BUFFER})
985 Accept-Line 'preprocess'
987 zstyle -t ":acceptline:${alcontext}" rehash \
988 && [[ -z ${commands[$com]} ]] \
992 && [[ -n ${reswords[(r)$com]} ]] \
993 || [[ -n ${aliases[$com]} ]] \
994 || [[ -n ${functions[$com]} ]] \
995 || [[ -n ${builtins[$com]} ]] \
996 || [[ -n ${commands[$com]} ]] ; then
998 # there is something sensible to execute, just do it.
1000 Accept-Line-HandleContext
1005 if [[ -o correct ]] \
1006 || [[ -o correctall ]] \
1007 && [[ -n ${functions[$fname]} ]] ; then
1009 # nothing there to execute but there is a function called
1010 # _command_name; a completion widget. Makes no sense to
1011 # call it on the commandline, but the correct{,all} options
1012 # will ask for it nevertheless, so warn the user.
1013 if [[ ${LASTWIDGET} == 'accept-line' ]] ; then
1014 # Okay, we warned the user before, he called us again,
1015 # so have it his way.
1017 Accept-Line-HandleContext
1022 if zstyle -t ":acceptline:${alcontext}" nocompwarn ; then
1024 Accept-Line-HandleContext
1026 # prepare warning message for the user, configurable via zstyle.
1027 zstyle -s ":acceptline:${alcontext}" compwarnfmt msg
1029 if [[ -z ${msg} ]] ; then
1030 msg="%c will not execute and completion %f exists."
1033 zformat -f msg "${msg}" "c:${com}" "f:${fname}"
1038 elif [[ -n ${buf//[$' \t\n']##/} ]] ; then
1039 # If we are here, the commandline contains something that is not
1040 # executable, which is neither subject to _command_name correction
1041 # and is not empty. might be a variable assignment
1043 Accept-Line-HandleContext
1048 # If we got this far, the commandline only contains whitespace, or is empty.
1050 Accept-Line-HandleContext
1055 zle -N Accept-Line-HandleContext
1057 # power completion / abbreviation expansion / buffer expansion
1058 # see http://zshwiki.org/home/examples/zleiab for details
1059 # less risky than the global aliases but powerful as well
1060 # just type the abbreviation key and afterwards 'ctrl-x .' to expand it
1063 setopt interactivecomments
1065 # key # value (#d additional doc string)
1071 'G' '|& grep '${grep_options:+"${grep_options[*]}"}
1073 'Hl' ' --help |& less -r' #d (Display help in pager)
1077 'N' '&>/dev/null' #d (No Output)
1078 'R' '| tr A-z N-za-m' #d (ROT13)
1079 'SL' '| sort | less'
1084 'co' './configure && make && sudo make install'
1087 function zleiab () {
1092 LBUFFER=${LBUFFER%%(#m)[.\-+:|_a-zA-Z0-9]#}
1093 LBUFFER+=${abk[$MATCH]:-$MATCH}
1098 function help-show-abk () {
1099 zle -M "$(print "Available abbreviations for expansion:"; print -a -C 2 ${(kv)abk})"
1102 zle -N help-show-abk
1104 # press "ctrl-x d" to insert the actual date in the form yyyy-mm-dd
1105 function insert-datestamp () { LBUFFER+=${(%):-'%D{%Y-%m-%d}'}; }
1106 zle -N insert-datestamp
1108 # press esc-m for inserting last typed word again (thanks to caphuso!)
1109 function insert-last-typed-word () { zle insert-last-word -- 0 -1 };
1110 zle -N insert-last-typed-word;
1112 function grml-zsh-fg () {
1113 if (( ${#jobstates} )); then
1115 [[ -o hist_ignore_space ]] && BUFFER=' ' || BUFFER=''
1116 BUFFER="${BUFFER}fg"
1119 zle -M 'No background jobs. Doing nothing.'
1124 # run command line as user root via sudo:
1125 function sudo-command-line () {
1126 [[ -z $BUFFER ]] && zle up-history
1127 if [[ $BUFFER != sudo\ * ]]; then
1128 BUFFER="sudo $BUFFER"
1129 CURSOR=$(( CURSOR+5 ))
1132 zle -N sudo-command-line
1134 ### jump behind the first word on the cmdline.
1135 ### useful to add options.
1136 function jump_after_first_word () {
1138 words=(${(z)BUFFER})
1140 if (( ${#words} <= 1 )) ; then
1143 CURSOR=${#${words[1]}}
1146 zle -N jump_after_first_word
1148 #f5# Create directory under cursor or the selected area
1149 function inplaceMkDirs () {
1150 # Press ctrl-xM to create the directory under the cursor or the selected area.
1151 # To select an area press ctrl-@ or ctrl-space and use the cursor.
1152 # Use case: you type "mv abc ~/testa/testb/testc/" and remember that the
1153 # directory does not exist yet -> press ctrl-XM and problem solved
1155 if ((REGION_ACTIVE==1)); then
1156 local F=$MARK T=$CURSOR
1157 if [[ $F -gt $T ]]; then
1161 # get marked area from buffer and eliminate whitespace
1162 PATHTOMKDIR=${BUFFER[F+1,T]%%[[:space:]]##}
1163 PATHTOMKDIR=${PATHTOMKDIR##[[:space:]]##}
1165 local bufwords iword
1166 bufwords=(${(z)LBUFFER})
1168 bufwords=(${(z)BUFFER})
1169 PATHTOMKDIR="${(Q)bufwords[iword]}"
1171 [[ -z "${PATHTOMKDIR}" ]] && return 1
1172 PATHTOMKDIR=${~PATHTOMKDIR}
1173 if [[ -e "${PATHTOMKDIR}" ]]; then
1174 zle -M " path already exists, doing nothing"
1176 zle -M "$(mkdir -p -v "${PATHTOMKDIR}")"
1181 zle -N inplaceMkDirs
1183 #v1# set number of lines to display per page
1184 HELP_LINES_PER_PAGE=20
1185 #v1# set location of help-zle cache file
1186 HELP_ZLE_CACHE_FILE=~/.cache/zsh_help_zle_lines.zsh
1187 # helper function for help-zle, actually generates the help text
1188 function help_zle_parse_keybindings () {
1191 unsetopt ksharrays #indexing starts at 1
1193 #v1# choose files that help-zle will parse for keybindings
1194 ((${+HELPZLE_KEYBINDING_FILES})) || HELPZLE_KEYBINDING_FILES=( /etc/zsh/zshrc ~/.zshrc.pre ~/.zshrc ~/.zshrc.local )
1196 if [[ -r $HELP_ZLE_CACHE_FILE ]]; then
1199 for f ($HELPZLE_KEYBINDING_FILES) [[ $f -nt $HELP_ZLE_CACHE_FILE ]] && load_cache=1
1200 [[ $load_cache -eq 0 ]] && . $HELP_ZLE_CACHE_FILE && return
1203 #fill with default keybindings, possibly to be overwritten in a file later
1204 #Note that due to zsh inconsistency on escaping assoc array keys, we encase the key in '' which we will remove later
1205 local -A help_zle_keybindings
1206 help_zle_keybindings['<Ctrl>@']="set MARK"
1207 help_zle_keybindings['<Ctrl>x<Ctrl>j']="vi-join lines"
1208 help_zle_keybindings['<Ctrl>x<Ctrl>b']="jump to matching brace"
1209 help_zle_keybindings['<Ctrl>x<Ctrl>u']="undo"
1210 help_zle_keybindings['<Ctrl>_']="undo"
1211 help_zle_keybindings['<Ctrl>x<Ctrl>f<c>']="find <c> in cmdline"
1212 help_zle_keybindings['<Ctrl>a']="goto beginning of line"
1213 help_zle_keybindings['<Ctrl>e']="goto end of line"
1214 help_zle_keybindings['<Ctrl>t']="transpose charaters"
1215 help_zle_keybindings['<Alt>t']="transpose words"
1216 help_zle_keybindings['<Alt>s']="spellcheck word"
1217 help_zle_keybindings['<Ctrl>k']="backward kill buffer"
1218 help_zle_keybindings['<Ctrl>u']="forward kill buffer"
1219 help_zle_keybindings['<Ctrl>y']="insert previously killed word/string"
1220 help_zle_keybindings["<Alt>'"]="quote line"
1221 help_zle_keybindings['<Alt>"']="quote from mark to cursor"
1222 help_zle_keybindings['<Alt><arg>']="repeat next cmd/char <arg> times (<Alt>-<Alt>1<Alt>0a -> -10 times 'a')"
1223 help_zle_keybindings['<Alt>u']="make next word Uppercase"
1224 help_zle_keybindings['<Alt>l']="make next word lowercase"
1225 help_zle_keybindings['<Ctrl>xG']="preview expansion under cursor"
1226 help_zle_keybindings['<Alt>q']="push current CL into background, freeing it. Restore on next CL"
1227 help_zle_keybindings['<Alt>.']="insert (and interate through) last word from prev CLs"
1228 help_zle_keybindings['<Alt>,']="complete word from newer history (consecutive hits)"
1229 help_zle_keybindings['<Alt>m']="repeat last typed word on current CL"
1230 help_zle_keybindings['<Ctrl>v']="insert next keypress symbol literally (e.g. for bindkey)"
1231 help_zle_keybindings['!!:n*<Tab>']="insert last n arguments of last command"
1232 help_zle_keybindings['!!:n-<Tab>']="insert arguments n..N-2 of last command (e.g. mv s s d)"
1233 help_zle_keybindings['<Alt>h']="show help/manpage for current command"
1235 #init global variables
1236 unset help_zle_lines help_zle_sln
1237 typeset -g -a help_zle_lines
1238 typeset -g help_zle_sln=1
1241 local lastkeybind_desc contents #last description starting with #k# that we found
1242 local num_lines_elapsed=0 #number of lines between last description and keybinding
1243 #search config files in the order they a called (and thus the order in which they overwrite keybindings)
1244 for f in $HELPZLE_KEYBINDING_FILES; do
1245 [[ -r "$f" ]] || continue #not readable ? skip it
1247 for cline in "${(f)contents}"; do
1248 #zsh pattern: matches lines like: #k# ..............
1249 if [[ "$cline" == (#s)[[:space:]]#\#k\#[[:space:]]##(#b)(*)[[:space:]]#(#e) ]]; then
1250 lastkeybind_desc="$match[*]"
1252 #zsh pattern: matches lines that set a keybinding using bind2map, bindkey or compdef -k
1253 # ignores lines that are commentend out
1254 # grabs first in '' or "" enclosed string with length between 1 and 6 characters
1255 elif [[ "$cline" == [^#]#(bind2maps[[:space:]](*)-s|bindkey|compdef -k)[[:space:]](*)(#b)(\"((?)(#c1,6))\"|\'((?)(#c1,6))\')(#B)(*) ]]; then
1256 #description previously found ? description not more than 2 lines away ? keybinding not empty ?
1257 if [[ -n $lastkeybind_desc && $num_lines_elapsed -lt 2 && -n $match[1] ]]; then
1258 #substitute keybinding string with something readable
1259 k=${${${${${${${match[1]/\\e\^h/<Alt><BS>}/\\e\^\?/<Alt><BS>}/\\e\[5~/<PageUp>}/\\e\[6~/<PageDown>}//(\\e|\^\[)/<Alt>}//\^/<Ctrl>}/3~/<Alt><Del>}
1260 #put keybinding in assoc array, possibly overwriting defaults or stuff found in earlier files
1261 #Note that we are extracting the keybinding-string including the quotes (see Note at beginning)
1262 help_zle_keybindings[${k}]=$lastkeybind_desc
1266 ((num_lines_elapsed++))
1271 #calculate length of keybinding column
1273 for k (${(k)help_zle_keybindings[@]}) ((kstrlen < ${#k})) && kstrlen=${#k}
1274 #convert the assoc array into preformated lines, which we are able to sort
1275 for k v in ${(kv)help_zle_keybindings[@]}; do
1276 #pad keybinding-string to kstrlen chars and remove outermost characters (i.e. the quotes)
1277 help_zle_lines+=("${(r:kstrlen:)k[2,-2]}${v}")
1279 #sort lines alphabetically
1280 help_zle_lines=("${(i)help_zle_lines[@]}")
1281 [[ -d ${HELP_ZLE_CACHE_FILE:h} ]] || mkdir -p "${HELP_ZLE_CACHE_FILE:h}"
1282 echo "help_zle_lines=(${(q)help_zle_lines[@]})" >| $HELP_ZLE_CACHE_FILE
1283 zcompile $HELP_ZLE_CACHE_FILE
1285 typeset -g help_zle_sln
1286 typeset -g -a help_zle_lines
1288 # Provides (partially autogenerated) help on keybindings and the zsh line editor
1289 function help-zle () {
1291 unsetopt ksharrays #indexing starts at 1
1292 #help lines already generated ? no ? then do it
1293 [[ ${+functions[help_zle_parse_keybindings]} -eq 1 ]] && {help_zle_parse_keybindings && unfunction help_zle_parse_keybindings}
1294 #already displayed all lines ? go back to the start
1295 [[ $help_zle_sln -gt ${#help_zle_lines} ]] && help_zle_sln=1
1296 local sln=$help_zle_sln
1297 #note that help_zle_sln is a global var, meaning we remember the last page we viewed
1298 help_zle_sln=$((help_zle_sln + HELP_LINES_PER_PAGE))
1299 zle -M "${(F)help_zle_lines[sln,help_zle_sln-1]}"
1303 ## complete word from currently visible Screen or Tmux buffer.
1304 if check_com -c screen || check_com -c tmux; then
1305 function _complete_screen_display () {
1306 [[ "$TERM" != "screen" ]] && return 1
1308 local TMPFILE=$(mktemp)
1309 local -U -a _screen_display_wordlist
1310 trap "rm -f $TMPFILE" EXIT
1312 # fill array with contents from screen hardcopy
1313 if ((${+TMUX})); then
1314 #works, but crashes tmux below version 1.4
1315 #luckily tmux -V option to ask for version, was also added in 1.4
1316 tmux -V &>/dev/null || return
1317 tmux -q capture-pane \; save-buffer -b 0 $TMPFILE \; delete-buffer -b 0
1319 screen -X hardcopy $TMPFILE
1320 # screen sucks, it dumps in latin1, apparently always. so recode it
1322 check_com recode && recode latin1 $TMPFILE
1324 _screen_display_wordlist=( ${(QQ)$(<$TMPFILE)} )
1325 # remove PREFIX to be completed from that array
1326 _screen_display_wordlist[${_screen_display_wordlist[(i)$PREFIX]}]=""
1327 compadd -a _screen_display_wordlist
1329 #m# k CTRL-x\,\,\,S Complete word from GNU screen buffer
1331 compdef -k _complete_screen_display complete-word '^xS'
1334 # Load a few more functions and tie them to widgets, so they can be bound:
1336 function zrcautozle () {
1339 zrcautoload $fnc && zle -N $fnc
1342 function zrcgotwidget () {
1343 (( ${+widgets[$1]} ))
1346 function zrcgotkeymap () {
1347 [[ -n ${(M)keymaps:#$1} ]]
1350 zrcautozle insert-files
1351 zrcautozle edit-command-line
1352 zrcautozle insert-unicode-char
1353 if zrcautoload history-search-end; then
1354 zle -N history-beginning-search-backward-end history-search-end
1355 zle -N history-beginning-search-forward-end history-search-end
1357 zle -C hist-complete complete-word _generic
1358 zstyle ':completion:hist-complete:*' completer _history
1360 # The actual terminal setup hooks and bindkey-calls:
1362 # An array to note missing features to ease diagnosis in case of problems.
1363 typeset -ga grml_missing_features
1365 function zrcbindkey () {
1366 if (( ARGC )) && zrcgotwidget ${argv[-1]}; then
1371 function bind2maps () {
1372 local i sequence widget
1375 while [[ "$1" != "--" ]]; do
1381 if [[ "$1" == "-s" ]]; then
1385 sequence="${key[$1]}"
1389 [[ -z "$sequence" ]] && return 1
1391 for i in "${maps[@]}"; do
1392 zrcbindkey -M "$i" "$sequence" "$widget"
1396 if (( ${+terminfo[smkx]} )) && (( ${+terminfo[rmkx]} )); then
1397 function zle-smkx () {
1399 printf '%s' ${terminfo[smkx]}
1401 function zle-rmkx () {
1403 printf '%s' ${terminfo[rmkx]}
1405 function zle-line-init () {
1408 function zle-line-finish () {
1411 zle -N zle-line-init
1412 zle -N zle-line-finish
1414 for i in {s,r}mkx; do
1415 (( ${+terminfo[$i]} )) || grml_missing_features+=($i)
1422 Home "${terminfo[khome]}"
1423 End "${terminfo[kend]}"
1424 Insert "${terminfo[kich1]}"
1425 Delete "${terminfo[kdch1]}"
1426 Up "${terminfo[kcuu1]}"
1427 Down "${terminfo[kcud1]}"
1428 Left "${terminfo[kcub1]}"
1429 Right "${terminfo[kcuf1]}"
1430 PageUp "${terminfo[kpp]}"
1431 PageDown "${terminfo[knp]}"
1432 BackTab "${terminfo[kcbt]}"
1435 # Guidelines for adding key bindings:
1437 # - Do not add hardcoded escape sequences, to enable non standard key
1438 # combinations such as Ctrl-Meta-Left-Cursor. They are not easily portable.
1440 # - Adding Ctrl characters, such as '^b' is okay; note that '^b' and '^B' are
1443 # - All keys from the $key[] mapping are obviously okay.
1445 # - Most terminals send "ESC x" when Meta-x is pressed. Thus, sequences like
1446 # '\ex' are allowed in here as well.
1448 bind2maps emacs -- Home beginning-of-somewhere
1449 bind2maps viins vicmd -- Home vi-beginning-of-line
1450 bind2maps emacs -- End end-of-somewhere
1451 bind2maps viins vicmd -- End vi-end-of-line
1452 bind2maps emacs viins -- Insert overwrite-mode
1453 bind2maps vicmd -- Insert vi-insert
1454 bind2maps emacs -- Delete delete-char
1455 bind2maps viins vicmd -- Delete vi-delete-char
1456 bind2maps emacs viins vicmd -- Up up-line-or-search
1457 bind2maps emacs viins vicmd -- Down down-line-or-search
1458 bind2maps emacs -- Left backward-char
1459 bind2maps viins vicmd -- Left vi-backward-char
1460 bind2maps emacs -- Right forward-char
1461 bind2maps viins vicmd -- Right vi-forward-char
1462 #k# Perform abbreviation expansion
1463 bind2maps emacs viins -- -s '^x.' zleiab
1464 #k# Display list of abbreviations that would expand
1465 bind2maps emacs viins -- -s '^xb' help-show-abk
1466 #k# mkdir -p <dir> from string under cursor or marked area
1467 bind2maps emacs viins -- -s '^xM' inplaceMkDirs
1468 #k# display help for keybindings and ZLE
1469 bind2maps emacs viins -- -s '^xz' help-zle
1470 #k# Insert files and test globbing
1471 bind2maps emacs viins -- -s "^xf" insert-files
1472 #k# Edit the current line in \kbd{\$EDITOR}
1473 bind2maps emacs viins -- -s '\ee' edit-command-line
1474 #k# search history backward for entry beginning with typed text
1475 bind2maps emacs viins -- -s '^xp' history-beginning-search-backward-end
1476 #k# search history forward for entry beginning with typed text
1477 bind2maps emacs viins -- -s '^xP' history-beginning-search-forward-end
1478 #k# search history backward for entry beginning with typed text
1479 bind2maps emacs viins -- PageUp history-beginning-search-backward-end
1480 #k# search history forward for entry beginning with typed text
1481 bind2maps emacs viins -- PageDown history-beginning-search-forward-end
1482 bind2maps emacs viins -- -s "^x^h" commit-to-history
1483 #k# Kill left-side word or everything up to next slash
1484 bind2maps emacs viins -- -s '\ev' slash-backward-kill-word
1485 #k# Kill left-side word or everything up to next slash
1486 bind2maps emacs viins -- -s '\e^h' slash-backward-kill-word
1487 #k# Kill left-side word or everything up to next slash
1488 bind2maps emacs viins -- -s '\e^?' slash-backward-kill-word
1489 # Do history expansion on space:
1490 bind2maps emacs viins -- -s ' ' magic-space
1491 #k# Trigger menu-complete
1492 bind2maps emacs viins -- -s '\ei' menu-complete # menu completion via esc-i
1493 #k# Insert a timestamp on the command line (yyyy-mm-dd)
1494 bind2maps emacs viins -- -s '^xd' insert-datestamp
1495 #k# Insert last typed word
1496 bind2maps emacs viins -- -s "\em" insert-last-typed-word
1497 #k# A smart shortcut for \kbd{fg<enter>}
1498 bind2maps emacs viins -- -s '^z' grml-zsh-fg
1499 #k# prepend the current command with "sudo"
1500 bind2maps emacs viins -- -s "^os" sudo-command-line
1501 #k# jump to after first word (for adding options)
1502 bind2maps emacs viins -- -s '^x1' jump_after_first_word
1503 #k# complete word from history with menu
1504 bind2maps emacs viins -- -s "^x^x" hist-complete
1506 # insert unicode character
1507 # usage example: 'ctrl-x i' 00A7 'ctrl-x i' will give you an §
1508 # See for example http://unicode.org/charts/ for unicode characters code
1509 #k# Insert Unicode character
1510 bind2maps emacs viins -- -s '^xi' insert-unicode-char
1512 # use the new *-pattern-* widgets for incremental history search
1513 if zrcgotwidget history-incremental-pattern-search-backward; then
1514 for seq wid in '^r' history-incremental-pattern-search-backward \
1515 '^s' history-incremental-pattern-search-forward
1517 bind2maps emacs viins vicmd -- -s $seq $wid
1519 builtin unset -v seq wid
1522 if zrcgotkeymap menuselect; then
1523 #m# k Shift-tab Perform backwards menu completion
1524 bind2maps menuselect -- BackTab reverse-menu-complete
1526 #k# menu selection: pick item but stay in the menu
1527 bind2maps menuselect -- -s '\e^M' accept-and-menu-complete
1528 # also use + and INSERT since it's easier to press repeatedly
1529 bind2maps menuselect -- -s '+' accept-and-menu-complete
1530 bind2maps menuselect -- Insert accept-and-menu-complete
1532 # accept a completion and try to complete again by using menu
1533 # completion; very useful with completing directories
1534 # by using 'undo' one's got a simple file browser
1535 bind2maps menuselect -- -s '^o' accept-and-infer-next-history
1538 # Finally, here are still a few hardcoded escape sequences; Special sequences
1539 # like Ctrl-<Cursor-key> etc do suck a fair bit, because they are not
1540 # standardised and most of the time are not available in a terminals terminfo
1543 # While we do not encourage adding bindings like these, we will keep these for
1544 # backward compatibility.
1546 ## use Ctrl-left-arrow and Ctrl-right-arrow for jumping to word-beginnings on
1547 ## the command line.
1549 bind2maps emacs viins vicmd -- -s '\eOc' forward-word
1550 bind2maps emacs viins vicmd -- -s '\eOd' backward-word
1551 # These are for xterm:
1552 bind2maps emacs viins vicmd -- -s '\e[1;5C' forward-word
1553 bind2maps emacs viins vicmd -- -s '\e[1;5D' backward-word
1554 ## the same for alt-left-arrow and alt-right-arrow
1556 bind2maps emacs viins vicmd -- -s '\e\e[C' forward-word
1557 bind2maps emacs viins vicmd -- -s '\e\e[D' backward-word
1559 bind2maps emacs viins vicmd -- -s '^[[1;3C' forward-word
1560 bind2maps emacs viins vicmd -- -s '^[[1;3D' backward-word
1561 # Also try ESC Left/Right:
1562 bind2maps emacs viins vicmd -- -s '\e'${key[Right]} forward-word
1563 bind2maps emacs viins vicmd -- -s '\e'${key[Left]} backward-word
1570 # we don't want to quote/espace URLs on our own...
1571 # if autoload -U url-quote-magic ; then
1572 # zle -N self-insert url-quote-magic
1573 # zstyle ':url-quote-magic:*' url-metas '*?[]^()~#{}='
1575 # print 'Notice: no url-quote-magic available :('
1577 alias url-quote='autoload -U url-quote-magic ; zle -N self-insert url-quote-magic'
1579 #m# k ESC-h Call \kbd{run-help} for the 1st word on the command line
1580 alias run-help >&/dev/null && unalias run-help
1581 for rh in run-help{,-git,-ip,-openssl,-p4,-sudo,-svk,-svn}; do
1585 # command not found handling
1587 (( ${COMMAND_NOT_FOUND} == 1 )) &&
1588 function command_not_found_handler () {
1590 if [[ -x ${GRML_ZSH_CNF_HANDLER} ]] ; then
1591 ${GRML_ZSH_CNF_HANDLER} $1
1599 HISTFILE=${HISTFILE:-${ZDOTDIR:-${HOME}}/.zsh_history}
1600 isgrmlcd && HISTSIZE=500 || HISTSIZE=5000
1601 isgrmlcd && SAVEHIST=1000 || SAVEHIST=10000 # useful for setopt append_history
1605 DIRSTACKSIZE=${DIRSTACKSIZE:-20}
1606 DIRSTACKFILE=${DIRSTACKFILE:-${ZDOTDIR:-${HOME}}/.zdirs}
1608 if zstyle -T ':grml:chpwd:dirstack' enable; then
1609 typeset -gaU GRML_PERSISTENT_DIRSTACK
1610 function grml_dirstack_filter () {
1613 if zstyle -s ':grml:chpwd:dirstack' filter filter; then
1614 $filter $1 && return 0
1616 if zstyle -a ':grml:chpwd:dirstack' exclude exclude; then
1617 for entry in "${exclude[@]}"; do
1618 [[ $1 == ${~entry} ]] && return 0
1625 (( ZSH_SUBSHELL )) && return
1626 (( $DIRSTACKSIZE <= 0 )) && return
1627 [[ -z $DIRSTACKFILE ]] && return
1628 grml_dirstack_filter $PWD && return
1629 GRML_PERSISTENT_DIRSTACK=(
1630 $PWD "${(@)GRML_PERSISTENT_DIRSTACK[1,$DIRSTACKSIZE]}"
1632 builtin print -l ${GRML_PERSISTENT_DIRSTACK} >! ${DIRSTACKFILE}
1635 if [[ -f ${DIRSTACKFILE} ]]; then
1636 # Enabling NULL_GLOB via (N) weeds out any non-existing
1637 # directories from the saved dir-stack file.
1638 dirstack=( ${(f)"$(< $DIRSTACKFILE)"}(N) )
1639 # "cd -" won't work after login by just setting $OLDPWD, so
1640 [[ -d $dirstack[1] ]] && cd -q $dirstack[1] && cd -q $OLDPWD
1643 if zstyle -t ':grml:chpwd:dirstack' filter-on-load; then
1644 for i in "${dirstack[@]}"; do
1645 if ! grml_dirstack_filter "$i"; then
1646 GRML_PERSISTENT_DIRSTACK=(
1647 "${GRML_PERSISTENT_DIRSTACK[@]}"
1653 GRML_PERSISTENT_DIRSTACK=( "${dirstack[@]}" )
1657 # directory based profiles
1661 # chpwd_profiles(): Directory Profiles, Quickstart:
1665 # zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)' profile grml
1666 # zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian
1669 # For details see the `grmlzshrc.5' manual page.
1670 function chpwd_profiles () {
1671 local profile context
1674 context=":chpwd:profiles:$PWD"
1675 zstyle -s "$context" profile profile || profile='default'
1676 zstyle -T "$context" re-execute && reexecute=1 || reexecute=0
1678 if (( ${+parameters[CHPWD_PROFILE]} == 0 )); then
1679 typeset -g CHPWD_PROFILE
1680 local CHPWD_PROFILES_INIT=1
1681 (( ${+functions[chpwd_profiles_init]} )) && chpwd_profiles_init
1682 elif [[ $profile != $CHPWD_PROFILE ]]; then
1683 (( ${+functions[chpwd_leave_profile_$CHPWD_PROFILE]} )) \
1684 && chpwd_leave_profile_${CHPWD_PROFILE}
1686 if (( reexecute )) || [[ $profile != $CHPWD_PROFILE ]]; then
1687 (( ${+functions[chpwd_profile_$profile]} )) && chpwd_profile_${profile}
1690 CHPWD_PROFILE="${profile}"
1694 chpwd_functions=( ${chpwd_functions} chpwd_profiles )
1698 # Prompt setup for grml:
1700 # set colors for use in prompts (modern zshs allow for the use of %F{red}foo%f
1701 # in prompts to get a red "foo" embedded, but it's good to keep these for
1702 # backwards compatibility).
1708 MAGENTA="%F{magenta}"
1712 elif zrcautoload colors && colors 2>/dev/null ; then
1713 BLUE="%{${fg[blue]}%}"
1714 RED="%{${fg_bold[red]}%}"
1715 GREEN="%{${fg[green]}%}"
1716 CYAN="%{${fg[cyan]}%}"
1717 MAGENTA="%{${fg[magenta]}%}"
1718 YELLOW="%{${fg[yellow]}%}"
1719 WHITE="%{${fg[white]}%}"
1720 NO_COLOR="%{${reset_color}%}"
1722 BLUE=$'%{\e[1;34m%}'
1724 GREEN=$'%{\e[1;32m%}'
1725 CYAN=$'%{\e[1;36m%}'
1726 WHITE=$'%{\e[1;37m%}'
1727 MAGENTA=$'%{\e[1;35m%}'
1728 YELLOW=$'%{\e[1;33m%}'
1729 NO_COLOR=$'%{\e[0m%}'
1732 # First, the easy ones: PS2..4:
1734 # secondary prompt, printed when the shell needs more information to complete a
1737 # selection prompt used within a select loop.
1739 # the execution trace prompt (setopt xtrace). default: '+%N:%i>'
1742 # Some additional features to use with our prompt:
1746 # - vcs_info setup and version specific fixes
1748 # display battery status on right side of prompt using 'GRML_DISPLAY_BATTERY=1' in .zshrc.pre
1750 function battery () {
1751 if [[ $GRML_DISPLAY_BATTERY -gt 0 ]] ; then
1754 elif isopenbsd ; then
1756 elif isfreebsd ; then
1758 elif isdarwin ; then
1762 GRML_DISPLAY_BATTERY=0
1767 function batterylinux () {
1768 GRML_BATTERY_LEVEL=''
1769 local batteries bat capacity
1770 batteries=( /sys/class/power_supply/BAT*(N) )
1771 if (( $#batteries > 0 )) ; then
1772 for bat in $batteries ; do
1773 if [[ -e $bat/capacity ]]; then
1774 capacity=$(< $bat/capacity)
1776 typeset -F energy_full=$(< $bat/energy_full)
1777 typeset -F energy_now=$(< $bat/energy_now)
1778 typeset -i capacity=$(( 100 * $energy_now / $energy_full))
1780 case $(< $bat/status) in
1782 GRML_BATTERY_LEVEL+=" ^"
1785 if (( capacity < 20 )) ; then
1786 GRML_BATTERY_LEVEL+=" !v"
1788 GRML_BATTERY_LEVEL+=" v"
1792 GRML_BATTERY_LEVEL+=" ="
1795 GRML_BATTERY_LEVEL+="${capacity}%%"
1800 function batteryopenbsd () {
1801 GRML_BATTERY_LEVEL=''
1802 local bat batfull batwarn batnow num
1804 bat=$(sysctl -n hw.sensors.acpibat${num} 2>/dev/null)
1805 if [[ -n $bat ]]; then
1806 batfull=${"$(sysctl -n hw.sensors.acpibat${num}.amphour0)"%% *}
1807 batwarn=${"$(sysctl -n hw.sensors.acpibat${num}.amphour1)"%% *}
1808 batnow=${"$(sysctl -n hw.sensors.acpibat${num}.amphour3)"%% *}
1809 case "$(sysctl -n hw.sensors.acpibat${num}.raw0)" in
1811 if (( batnow < batwarn )) ; then
1812 GRML_BATTERY_LEVEL+=" !v"
1814 GRML_BATTERY_LEVEL+=" v"
1818 GRML_BATTERY_LEVEL+=" ^"
1821 GRML_BATTERY_LEVEL+=" ="
1824 GRML_BATTERY_LEVEL+="${$(( 100 * batnow / batfull ))%%.*}%%"
1829 function batteryfreebsd () {
1830 GRML_BATTERY_LEVEL=''
1834 table=( ${=${${${${${(M)${(f)"$(acpiconf -i $num 2>&1)"}:#(State|Remaining capacity):*}%%( ##|%)}//:[ $'\t']##/@}// /-}//@/ }} )
1835 if [[ -n $table ]] && [[ $table[State] != "not-present" ]] ; then
1836 case $table[State] in
1838 if (( $table[Remaining-capacity] < 20 )) ; then
1839 GRML_BATTERY_LEVEL+=" !v"
1841 GRML_BATTERY_LEVEL+=" v"
1845 GRML_BATTERY_LEVEL+=" ^"
1848 GRML_BATTERY_LEVEL+=" ="
1851 GRML_BATTERY_LEVEL+="$table[Remaining-capacity]%%"
1856 function batterydarwin () {
1857 GRML_BATTERY_LEVEL=''
1859 table=( ${$(pmset -g ps)[(w)7,8]%%(\%|);} )
1860 if [[ -n $table[2] ]] ; then
1863 GRML_BATTERY_LEVEL+=" ^"
1866 if (( $table[1] < 20 )) ; then
1867 GRML_BATTERY_LEVEL+=" !v"
1869 GRML_BATTERY_LEVEL+=" v"
1873 GRML_BATTERY_LEVEL+=" ="
1876 GRML_BATTERY_LEVEL+="$table[1]%%"
1880 # set variable debian_chroot if running in a chroot with /etc/debian_chroot
1881 if [[ -z "$debian_chroot" ]] && [[ -r /etc/debian_chroot ]] ; then
1882 debian_chroot=$(</etc/debian_chroot)
1885 # gather version control information for inclusion in a prompt
1887 if zrcautoload vcs_info; then
1888 # `vcs_info' in zsh versions 4.3.10 and below have a broken `_realpath'
1889 # function, which can cause a lot of trouble with our directory-based
1891 if [[ ${ZSH_VERSION} == 4.3.<-10> ]] ; then
1892 function VCS_INFO_realpath () {
1893 setopt localoptions NO_shwordsplit chaselinks
1894 ( builtin cd -q $1 2> /dev/null && pwd; )
1898 zstyle ':vcs_info:*' max-exports 2
1900 if [[ -o restricted ]]; then
1901 zstyle ':vcs_info:*' enable NONE
1905 typeset -A grml_vcs_coloured_formats
1906 typeset -A grml_vcs_plain_formats
1908 grml_vcs_plain_formats=(
1909 format "(%s%)-[%b] " "zsh: %r"
1910 actionformat "(%s%)-[%b|%a] " "zsh: %r"
1911 rev-branchformat "%b:%r"
1914 grml_vcs_coloured_formats=(
1915 format "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${MAGENTA}]${NO_COLOR} "
1916 actionformat "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${YELLOW}|${RED}%a${MAGENTA}]${NO_COLOR} "
1917 rev-branchformat "%b${RED}:${YELLOW}%r"
1920 typeset GRML_VCS_COLOUR_MODE=xxx
1922 function grml_vcs_info_toggle_colour () {
1924 if [[ $GRML_VCS_COLOUR_MODE == plain ]]; then
1925 grml_vcs_info_set_formats coloured
1927 grml_vcs_info_set_formats plain
1932 function grml_vcs_info_set_formats () {
1934 #setopt localoptions xtrace
1935 local mode=$1 AF F BF
1936 if [[ $mode == coloured ]]; then
1937 AF=${grml_vcs_coloured_formats[actionformat]}
1938 F=${grml_vcs_coloured_formats[format]}
1939 BF=${grml_vcs_coloured_formats[rev-branchformat]}
1940 GRML_VCS_COLOUR_MODE=coloured
1942 AF=${grml_vcs_plain_formats[actionformat]}
1943 F=${grml_vcs_plain_formats[format]}
1944 BF=${grml_vcs_plain_formats[rev-branchformat]}
1945 GRML_VCS_COLOUR_MODE=plain
1948 zstyle ':vcs_info:*' actionformats "$AF" "zsh: %r"
1949 zstyle ':vcs_info:*' formats "$F" "zsh: %r"
1950 zstyle ':vcs_info:(sv[nk]|bzr):*' branchformat "$BF"
1954 # Change vcs_info formats for the grml prompt. The 2nd format sets up
1955 # $vcs_info_msg_1_ to contain "zsh: repo-name" used to set our screen title.
1956 if [[ "$TERM" == dumb ]] ; then
1957 grml_vcs_info_set_formats plain
1959 grml_vcs_info_set_formats coloured
1962 # Now for the fun part: The grml prompt themes in `promptsys' mode of operation
1964 # This actually defines three prompts:
1970 # They all share the same code and only differ with respect to which items they
1971 # contain. The main source of documentation is the `prompt_grml_help' function
1972 # below, which gets called when the user does this: prompt -h grml
1974 function prompt_grml_help () {
1978 This is the prompt as used by the grml-live system <http://grml.org>. It is
1979 a rather simple one-line prompt, that by default looks something like this:
1981 <user>@<host> <current-working-directory>[ <vcs_info-data>]%
1983 The prompt itself integrates with zsh's prompt themes system (as you are
1984 witnessing right now) and is configurable to a certain degree. In
1985 particular, these aspects are customisable:
1987 - The items used in the prompt (e.g. you can remove \`user' from
1988 the list of activated items, which will cause the user name to
1989 be omitted from the prompt string).
1991 - The attributes used with the items are customisable via strings
1992 used before and after the actual item.
1994 The available items are: at, battery, change-root, date, grml-chroot,
1995 history, host, jobs, newline, path, percent, rc, rc-always, sad-smiley,
1996 shell-level, time, user, vcs
1998 The actual configuration is done via zsh's \`zstyle' mechanism. The
1999 context, that is used while looking up styles is:
2001 ':prompt:grml:<left-or-right>:<subcontext>'
2003 Here <left-or-right> is either \`left' or \`right', signifying whether the
2004 style should affect the left or the right prompt. <subcontext> is either
2005 \`setup' or 'items:<item>', where \`<item>' is one of the available items.
2009 - use-rprompt (boolean): If \`true' (the default), print a sad smiley
2010 in $RPROMPT if the last command a returned non-successful error code.
2011 (This in only valid if <left-or-right> is "right"; ignored otherwise)
2013 - items (list): The list of items used in the prompt. If \`vcs' is
2014 present in the list, the theme's code invokes \`vcs_info'
2015 accordingly. Default (left): rc change-root user at host path vcs
2016 percent; Default (right): sad-smiley
2018 - strip-sensitive-characters (boolean): If the \`prompt_subst' option
2019 is active in zsh, the shell performs lots of expansions on prompt
2020 variable strings, including command substitution. So if you don't
2021 control where some of your prompt strings is coming from, this is
2022 an exploitable weakness. Grml's zsh setup does not set this option
2023 and it is off in the shell in zsh-mode by default. If it *is* turned
2024 on however, this style becomes active, and there are two flavours of
2025 it: On per default is a global variant in the '*:setup' context. This
2026 strips characters after the whole prompt string was constructed. There
2027 is a second variant in the '*:items:<item>', that is off by default.
2028 It allows fine grained control over which items' data is stripped.
2029 The characters that are stripped are: \$ and \`.
2031 Available styles in 'items:<item>' are: pre, post. These are strings that
2032 are inserted before (pre) and after (post) the item in question. Thus, the
2033 following would cause the user name to be printed in red instead of the
2036 zstyle ':prompt:grml:*:items:user' pre '%F{red}'
2038 Note, that the \`post' style may remain at its default value, because its
2039 default value is '%f', which turns the foreground text attribute off (which
2040 is exactly, what is still required with the new \`pre' value).
2044 function prompt_grml-chroot_help () {
2048 This is a variation of the grml prompt, see: prompt -h grml
2050 The main difference is the default value of the \`items' style. The rest
2051 behaves exactly the same. Here are the defaults for \`grml-chroot':
2053 - left: grml-chroot user at host path percent
2054 - right: (empty list)
2058 function prompt_grml-large_help () {
2062 This is a variation of the grml prompt, see: prompt -h grml
2064 The main difference is the default value of the \`items' style. In
2065 particular, this theme uses _two_ lines instead of one with the plain
2066 \`grml' theme. The rest behaves exactly the same. Here are the defaults
2069 - left: rc jobs history shell-level change-root time date newline user
2070 at host path vcs percent
2075 function grml_prompt_setup () {
2077 autoload -Uz vcs_info
2078 # The following autoload is disabled for now, since this setup includes a
2079 # static version of the ‘add-zsh-hook’ function above. It needs to be
2080 # re-enabled as soon as that static definition is removed again.
2081 #autoload -Uz add-zsh-hook
2082 add-zsh-hook precmd prompt_$1_precmd
2085 function prompt_grml_setup () {
2086 grml_prompt_setup grml
2089 function prompt_grml-chroot_setup () {
2090 grml_prompt_setup grml-chroot
2093 function prompt_grml-large_setup () {
2094 grml_prompt_setup grml-large
2097 # These maps define default tokens and pre-/post-decoration for items to be
2098 # used within the themes. All defaults may be customised in a context sensitive
2099 # matter by using zsh's `zstyle' mechanism.
2100 typeset -gA grml_prompt_pre_default \
2101 grml_prompt_post_default \
2102 grml_prompt_token_default \
2103 grml_prompt_token_function
2105 grml_prompt_pre_default=(
2110 grml-chroot '%F{red}'
2120 shell-level '%F{red}'
2126 grml_prompt_post_default=(
2147 grml_prompt_token_default=(
2149 battery 'GRML_BATTERY_LEVEL'
2150 change-root 'debian_chroot'
2152 grml-chroot 'GRML_CHROOT'
2153 history '{history#%!} '
2155 jobs '[%j running job(s)] '
2157 path '%40<..<%~%<< '
2161 sad-smiley '%(?..:()'
2162 shell-level '%(3L.+ .)'
2163 time '%D{%H:%M:%S} '
2168 function grml_theme_has_token () {
2169 if (( ARGC != 1 )); then
2170 printf 'usage: grml_theme_has_token <name>\n'
2173 (( ${+grml_prompt_token_default[$1]} ))
2176 function GRML_theme_add_token_usage () {
2178 Usage: grml_theme_add_token <name> [-f|-i] <token/function> [<pre> <post>]
2180 <name> is the name for the newly added token. If the \`-f' or \`-i' options
2181 are used, <token/function> is the name of the function (see below for
2182 details). Otherwise it is the literal token string to be used. <pre> and
2183 <post> are optional.
2187 -f <function> Use a function named \`<function>' each time the token
2190 -i <function> Use a function named \`<function>' to initialise the
2191 value of the token _once_ at runtime.
2193 The functions are called with one argument: the token's new name. The
2194 return value is expected in the \$REPLY parameter. The use of these
2195 options is mutually exclusive.
2197 There is a utility function \`grml_theme_has_token', which you can use
2198 to test if a token exists before trying to add it. This can be a guard
2199 for situations in which a \`grml_theme_add_token' call may happen more
2204 To add a new token \`day' that expands to the current weekday in the
2205 current locale in green foreground colour, use this:
2207 grml_theme_add_token day '%D{%A}' '%F{green}' '%f'
2209 Another example would be support for \$VIRTUAL_ENV:
2211 function virtual_env_prompt () {
2212 REPLY=\${VIRTUAL_ENV+\${VIRTUAL_ENV:t} }
2214 grml_theme_add_token virtual-env -f virtual_env_prompt
2216 After that, you will be able to use a changed \`items' style to
2217 assemble your prompt.
2221 function grml_theme_add_token () {
2223 local name token pre post
2224 local -i init funcall
2226 if (( ARGC == 0 )); then
2227 GRML_theme_add_token_usage
2237 if [[ $1 == '-f' ]]; then
2240 elif [[ $1 == '-i' ]]; then
2245 if (( ARGC == 0 )); then
2247 grml_theme_add_token: No token-string/function-name provided!\n\n'
2248 GRML_theme_add_token_usage
2253 if (( ARGC != 0 && ARGC != 2 )); then
2255 grml_theme_add_token: <pre> and <post> need to by specified _both_!\n\n'
2256 GRML_theme_add_token_usage
2265 if grml_theme_has_token $name; then
2267 grml_theme_add_token: Token `%s'\'' exists! Giving up!\n\n' $name
2268 GRML_theme_add_token_usage
2276 grml_prompt_pre_default[$name]=$pre
2277 grml_prompt_post_default[$name]=$post
2278 if (( funcall )); then
2279 grml_prompt_token_function[$name]=$token
2280 grml_prompt_token_default[$name]=23
2282 grml_prompt_token_default[$name]=$token
2286 function grml_wrap_reply () {
2293 if (( ${+parameters[$new]} )); then
2294 REPLY="${left}${(P)new}${right}"
2300 function grml_prompt_addto () {
2303 local lr it apre apost new v REPLY
2307 [[ $target == PS1 ]] && lr=left || lr=right
2308 zstyle -a ":prompt:${grmltheme}:${lr}:setup" items items || items=( "$@" )
2309 typeset -g "${target}="
2310 for it in "${items[@]}"; do
2311 zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" pre apre \
2312 || apre=${grml_prompt_pre_default[$it]}
2313 zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" post apost \
2314 || apost=${grml_prompt_post_default[$it]}
2315 zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" token new \
2316 || new=${grml_prompt_token_default[$it]}
2317 if (( ${+grml_prompt_token_function[$it]} )); then
2319 ${grml_prompt_token_function[$it]} $it
2323 grml_wrap_reply $target $new '' ''
2326 grml_wrap_reply $target $new '(' ')'
2329 if [[ -n ${(P)new} ]]; then
2336 v="vcs_info_msg_${new}_"
2337 if (( ! vcscalled )); then
2341 if (( ${+parameters[$v]} )) && [[ -n "${(P)v}" ]]; then
2350 # Strip volatile characters per item. This is off by default. See the
2351 # global stripping code a few lines below for details.
2352 if [[ -o prompt_subst ]] && zstyle -t ":prompt:${grmltheme}:${lr}:items:$it" \
2353 strip-sensitive-characters
2355 REPLY="${REPLY//[$\`]/}"
2357 typeset -g "${target}=${(P)target}${apre}${REPLY}${apost}"
2360 # Per default, strip volatile characters (in the prompt_subst case)
2361 # globally. If the option is off, the style has no effect. For more
2362 # control, this can be turned off and stripping can be configured on a
2363 # per-item basis (see above).
2364 if [[ -o prompt_subst ]] && zstyle -T ":prompt:${grmltheme}:${lr}:setup" \
2365 strip-sensitive-characters
2367 typeset -g "${target}=${${(P)target}//[$\`]/}"
2371 function prompt_grml_precmd () {
2373 local grmltheme=grml
2374 local -a left_items right_items
2375 left_items=(rc change-root user at host path vcs percent)
2376 right_items=(sad-smiley)
2378 prompt_grml_precmd_worker
2381 function prompt_grml-chroot_precmd () {
2383 local grmltheme=grml-chroot
2384 local -a left_items right_items
2385 left_items=(grml-chroot user at host path percent)
2388 prompt_grml_precmd_worker
2391 function prompt_grml-large_precmd () {
2393 local grmltheme=grml-large
2394 local -a left_items right_items
2395 left_items=(rc jobs history shell-level change-root time date newline
2396 user at host path vcs percent)
2397 right_items=(sad-smiley)
2399 prompt_grml_precmd_worker
2402 function prompt_grml_precmd_worker () {
2404 local -i vcscalled=0
2406 grml_prompt_addto PS1 "${left_items[@]}"
2407 if zstyle -T ":prompt:${grmltheme}:right:setup" use-rprompt; then
2408 grml_prompt_addto RPS1 "${right_items[@]}"
2412 function grml_prompt_fallback () {
2416 p0="${RED}%(?..%? )${WHITE}${debian_chroot:+($debian_chroot)}"
2417 p1="${BLUE}%n${NO_COLOR}@%m %40<...<%B%~%b%<< "'${vcs_info_msg_0_}'"%# "
2418 if (( EUID == 0 )); then
2419 PROMPT="${BLUE}${p0}${RED}${p1}"
2421 PROMPT="${RED}${p0}${BLUE}${p1}"
2425 if zrcautoload promptinit && promptinit 2>/dev/null ; then
2426 # Since we define the required functions in here and not in files in
2427 # $fpath, we need to stick the theme's name into `$prompt_themes'
2428 # ourselves, since promptinit does not pick them up otherwise.
2429 prompt_themes+=( grml grml-chroot grml-large )
2430 # Also, keep the array sorted...
2431 prompt_themes=( "${(@on)prompt_themes}" )
2433 print 'Notice: no promptinit available :('
2434 grml_prompt_fallback
2435 function precmd () { (( ${+functions[vcs_info]} )) && vcs_info; }
2439 # The prompt themes use modern features of zsh, that require at least
2440 # version 4.3.7 of the shell. Use the fallback otherwise.
2441 if [[ $GRML_DISPLAY_BATTERY -gt 0 ]]; then
2442 zstyle ':prompt:grml:right:setup' items sad-smiley battery
2443 add-zsh-hook precmd battery
2445 if [[ "$TERM" == dumb ]] ; then
2446 zstyle ":prompt:grml(|-large|-chroot):*:items:grml-chroot" pre ''
2447 zstyle ":prompt:grml(|-large|-chroot):*:items:grml-chroot" post ' '
2448 for i in rc user path jobs history date time shell-level; do
2449 zstyle ":prompt:grml(|-large|-chroot):*:items:$i" pre ''
2450 zstyle ":prompt:grml(|-large|-chroot):*:items:$i" post ''
2453 zstyle ':prompt:grml(|-large|-chroot):right:setup' use-rprompt false
2454 elif (( EUID == 0 )); then
2455 zstyle ':prompt:grml(|-large|-chroot):*:items:user' pre '%B%F{red}'
2458 # Finally enable one of the prompts.
2459 if [[ -n $GRML_CHROOT ]]; then
2461 elif [[ $GRMLPROMPT -gt 0 ]]; then
2467 grml_prompt_fallback
2468 function precmd () { (( ${+functions[vcs_info]} )) && vcs_info; }
2471 # Terminal-title wizardry
2473 function ESC_print () {
2474 info_print $'\ek' $'\e\\' "$@"
2476 function set_title () {
2477 info_print $'\e]0;' $'\a' "$@"
2480 function info_print () {
2481 local esc_begin esc_end
2485 printf '%s' ${esc_begin}
2487 printf '%s' "${esc_end}"
2490 function grml_reset_screen_title () {
2491 # adjust title of xterm
2492 # see http://www.faqs.org/docs/Linux-mini/Xterm-Title.html
2493 [[ ${NOTITLE:-} -gt 0 ]] && return 0
2496 set_title ${(%):-"%n@%m: %~"}
2501 function grml_vcs_to_screen_title () {
2502 if [[ $TERM == screen* ]] ; then
2503 if [[ -n ${vcs_info_msg_1_} ]] ; then
2504 ESC_print ${vcs_info_msg_1_}
2511 function grml_maintain_name () {
2512 # set hostname if not running on host with name 'grml'
2513 if [[ -n "$HOSTNAME" ]] && [[ "$HOSTNAME" != $(hostname) ]] ; then
2518 function grml_cmd_to_screen_title () {
2519 # get the name of the program currently running and hostname of local
2520 # machine set screen window title if running in a screen
2521 if [[ "$TERM" == screen* ]] ; then
2522 local CMD="${1[(wr)^(*=*|sudo|ssh|-*)]}$NAME"
2527 function grml_control_xterm_title () {
2530 set_title "${(%):-"%n@%m:"}" "$1"
2535 # The following autoload is disabled for now, since this setup includes a
2536 # static version of the ‘add-zsh-hook’ function above. It needs to be
2537 # re-enabled as soon as that static definition is removed again.
2538 #zrcautoload add-zsh-hook || add-zsh-hook () { :; }
2539 if [[ $NOPRECMD -eq 0 ]]; then
2540 add-zsh-hook precmd grml_reset_screen_title
2541 add-zsh-hook precmd grml_vcs_to_screen_title
2542 add-zsh-hook preexec grml_maintain_name
2543 add-zsh-hook preexec grml_cmd_to_screen_title
2544 if [[ $NOTITLE -eq 0 ]]; then
2545 add-zsh-hook preexec grml_control_xterm_title
2549 # 'hash' some often used directories
2551 hash -d deb=/var/cache/apt/archives
2552 hash -d doc=/usr/share/doc
2553 hash -d linux=/lib/modules/$(command uname -r)/build/
2554 hash -d log=/var/log
2555 hash -d slog=/var/log/syslog
2556 hash -d src=/usr/src
2557 hash -d www=/var/www
2561 if check_com -c screen ; then
2562 if [[ $UID -eq 0 ]] ; then
2563 if [[ -r /etc/grml/screenrc ]]; then
2564 alias screen='screen -c /etc/grml/screenrc'
2566 elif [[ ! -r $HOME/.screenrc ]] ; then
2567 if [[ -r /etc/grml/screenrc_grml ]]; then
2568 alias screen='screen -c /etc/grml/screenrc_grml'
2570 if [[ -r /etc/grml/screenrc ]]; then
2571 alias screen='screen -c /etc/grml/screenrc'
2577 # do we have GNU ls with color-support?
2578 if [[ "$TERM" != dumb ]]; then
2579 #a1# List files with colors (\kbd{ls \ldots})
2580 alias ls="command ls ${ls_options:+${ls_options[*]}}"
2581 #a1# List all files, with colors (\kbd{ls -la \ldots})
2582 alias la="command ls -la ${ls_options:+${ls_options[*]}}"
2583 #a1# List files with long colored list, without dotfiles (\kbd{ls -l \ldots})
2584 alias ll="command ls -l ${ls_options:+${ls_options[*]}}"
2585 #a1# List files with long colored list, human readable sizes (\kbd{ls -hAl \ldots})
2586 alias lh="command ls -hAl ${ls_options:+${ls_options[*]}}"
2587 #a1# List files with long colored list, append qualifier to filenames (\kbd{ls -l \ldots})\\&\quad(\kbd{/} for directories, \kbd{@} for symlinks ...)
2588 alias l="command ls -l ${ls_options:+${ls_options[*]}}"
2590 alias la='command ls -la'
2591 alias ll='command ls -l'
2592 alias lh='command ls -hAl'
2593 alias l='command ls -l'
2596 if [[ -r /proc/mdstat ]]; then
2597 alias mdstat='cat /proc/mdstat'
2600 alias ...='cd ../../'
2602 # generate alias named "$KERNELVERSION-reboot" so you can use boot with kexec:
2603 if [[ -x /sbin/kexec ]] && [[ -r /proc/cmdline ]] ; then
2604 alias "$(uname -r)-reboot"="kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)""
2607 # see http://www.cl.cam.ac.uk/~mgk25/unicode.html#term for details
2608 alias term2iso="echo 'Setting terminal to iso mode' ; print -n '\e%@'"
2609 alias term2utf="echo 'Setting terminal to utf-8 mode'; print -n '\e%G'"
2611 # make sure it is not assigned yet
2612 [[ -n ${aliases[utf2iso]} ]] && unalias utf2iso
2613 function utf2iso () {
2616 for ENV in $(env | command grep -i '.utf') ; do
2617 eval export "$(echo $ENV | sed 's/UTF-8/iso885915/ ; s/utf8/iso885915/')"
2622 # make sure it is not assigned yet
2623 [[ -n ${aliases[iso2utf]} ]] && unalias iso2utf
2624 function iso2utf () {
2625 if ! isutfenv ; then
2627 for ENV in $(env | command grep -i '\.iso') ; do
2628 eval export "$(echo $ENV | sed 's/iso.*/UTF-8/ ; s/ISO.*/UTF-8/')"
2633 # especially for roadwarriors using GNU screen and ssh:
2634 if ! check_com asc &>/dev/null ; then
2635 function asc () { autossh -t "$@" 'screen -RdU' }
2639 #f1# Hints for the use of zsh on grml
2640 function zsh-help () {
2641 print "$bg[white]$fg[black]
2642 zsh-help - hints for use of zsh on grml
2643 =======================================$reset_color"
2646 Main configuration of zsh happens in /etc/zsh/zshrc.
2647 That file is part of the package grml-etc-core, if you want to
2648 use them on a non-grml-system just get the tar.gz from
2649 http://deb.grml.org/ or (preferably) get it from the git repository:
2651 http://git.grml.org/f/grml-etc-core/etc/zsh/zshrc
2653 This version of grml'\''s zsh setup does not use skel/.zshrc anymore.
2654 The file is still there, but it is empty for backwards compatibility.
2656 For your own changes use these two files:
2660 The former is sourced very early in our zshrc, the latter is sourced
2663 System wide configuration without touching configuration files of grml
2664 can take place in /etc/zsh/zshrc.local.
2666 For information regarding zsh start at http://grml.org/zsh/
2668 Take a look at grml'\''s zsh refcard:
2669 % xpdf =(zcat /usr/share/doc/grml-docs/zsh/grml-zsh-refcard.pdf.gz)
2671 Check out the main zsh refcard:
2672 % '$BROWSER' http://www.bash2zsh.com/zsh_refcard/refcard.pdf
2674 And of course visit the zsh-lovers:
2677 You can adjust some options through environment variables when
2678 invoking zsh without having to edit configuration files.
2679 Basically meant for bash users who are not used to the power of
2682 "NOCOR=1 zsh" => deactivate automatic correction
2683 "NOMENU=1 zsh" => do not use auto menu completion
2684 (note: use ctrl-d for completion instead!)
2685 "NOPRECMD=1 zsh" => disable the precmd + preexec commands (set GNU screen title)
2686 "NOTITLE=1 zsh" => disable setting the title of xterms without disabling
2687 preexec() and precmd() completely
2688 "GRML_DISPLAY_BATTERY=1 zsh"
2689 => activate battery status on right side of prompt (WIP)
2690 "COMMAND_NOT_FOUND=1 zsh"
2691 => Enable a handler if an external command was not found
2692 The command called in the handler can be altered by setting
2693 the GRML_ZSH_CNF_HANDLER variable, the default is:
2694 "/usr/share/command-not-found/command-not-found"
2696 A value greater than 0 is enables a feature; a value equal to zero
2697 disables it. If you like one or the other of these settings, you can
2698 add them to ~/.zshrc.pre to ensure they are set when sourcing grml'\''s
2702 $bg[white]$fg[black]
2703 Please report wishes + bugs to the grml-team: http://grml.org/bugs/
2704 Enjoy your grml system with the zsh!$reset_color"
2708 if [[ -r /etc/debian_version ]] ; then
2709 if [[ -z "$GRML_NO_APT_ALIASES" ]]; then
2710 #a3# Execute \kbd{apt-cache policy}
2711 alias acp='apt-cache policy'
2712 if check_com -c apt ; then
2713 #a3# Execute \kbd{apt search}
2714 alias acs='apt search'
2715 #a3# Execute \kbd{apt show}
2716 alias acsh='apt show'
2717 #a3# Execute \kbd{apt dist-upgrade}
2718 salias adg="apt dist-upgrade"
2719 #a3# Execute \kbd{apt upgrade}
2720 salias ag="apt upgrade"
2721 #a3# Execute \kbd{apt install}
2722 salias agi="apt install"
2723 #a3# Execute \kbd{apt update}
2724 salias au="apt update"
2726 alias acs='apt-cache search'
2727 alias acsh='apt-cache show'
2728 salias adg="apt-get dist-upgrade"
2729 salias ag="apt-get upgrade"
2730 salias agi="apt-get install"
2731 salias au="apt-get update"
2733 #a3# Execute \kbd{aptitude install}
2734 salias ati="aptitude install"
2735 #a3# Execute \kbd{aptitude update ; aptitude safe-upgrade}
2736 salias -a up="aptitude update ; aptitude safe-upgrade"
2737 #a3# Execute \kbd{dpkg-buildpackage}
2738 alias dbp='dpkg-buildpackage'
2739 #a3# Execute \kbd{grep-excuses}
2740 alias ge='grep-excuses'
2743 # get a root shell as normal user in live-cd mode:
2744 if isgrmlcd && [[ $UID -ne 0 ]] ; then
2750 # use /var/log/syslog iff present, fallback to journalctl otherwise
2751 if [ -e /var/log/syslog ] ; then
2752 #a1# Take a look at the syslog: \kbd{\$PAGER /var/log/syslog || journalctl}
2753 salias llog="$PAGER /var/log/syslog" # take a look at the syslog
2754 #a1# Take a look at the syslog: \kbd{tail -f /var/log/syslog || journalctl}
2755 salias tlog="tail -f /var/log/syslog" # follow the syslog
2756 elif check_com -c journalctl ; then
2757 salias llog="journalctl"
2758 salias tlog="journalctl -f"
2761 # sort installed Debian-packages by size
2762 if check_com -c dpkg-query ; then
2763 #a3# List installed Debian-packages sorted by size
2764 alias debs-by-size="dpkg-query -Wf 'x \${Installed-Size} \${Package} \${Status}\n' | sed -ne '/^x /d' -e '/^x \(.*\) install ok installed$/s//\1/p' | sort -nr"
2767 # if cdrecord is a symlink (to wodim) or isn't present at all warn:
2768 if [[ -L /usr/bin/cdrecord ]] || ! check_com -c cdrecord; then
2769 if check_com -c wodim; then
2770 function cdrecord () {
2772 cdrecord is not provided under its original name by Debian anymore.
2773 See #377109 in the BTS of Debian for more details.
2775 Please use the wodim binary instead
2783 # No core dumps: important for a live-cd-system
2788 function grmlstuff () {
2789 # people should use 'grml-x'!
2790 if check_com -c 915resolution; then
2791 function 855resolution () {
2792 echo "Please use 915resolution as resolution modifying tool for Intel \
2798 #a1# Output version of running grml
2799 alias grml-version='cat /etc/grml_version'
2801 if check_com -c grml-debootstrap ; then
2802 function debian2hd () {
2803 echo "Installing debian to harddisk is possible by using grml-debootstrap."
2809 # now run the functions
2811 is4 && isgrml && grmlstuff
2815 is4 && xsource "/etc/zsh/keephack"
2817 # wonderful idea of using "e" glob qualifier by Peter Stephenson
2818 # You use it as follows:
2819 # $ NTREF=/reference/file
2821 # This lists all the files in the current directory newer than the reference file.
2822 # You can also specify the reference file inline; note quotes:
2823 # $ ls -l *(e:'nt ~/.zshenv':)
2824 is4 && function nt () {
2825 if [[ -n $1 ]] ; then
2828 [[ $REPLY -nt $NTREF ]]
2833 #f1# Reload an autoloadable function
2834 function freload () { while (( $# )); do; unfunction $1; autoload -U $1; shift; done }
2835 compdef _functions freload
2840 # e.g.: a -> b -> c -> d ....
2845 # if parameter is given with leading '=', lookup $PATH for parameter and resolve that
2849 # Note: limit for recursive symlinks on linux:
2850 # http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/fs/namei.c?id=refs/heads/master#l808
2851 # This limits recursive symlink follows to 8,
2852 # while limiting consecutive symlinks to 40.
2854 # When resolving and displaying information about symlinks, no check is made
2855 # that the displayed information does make any sense on your OS.
2856 # We leave that decission to the user.
2858 # The zstat module is used to detect symlink loops. zstat is available since zsh4.
2859 # With an older zsh you will need to abort with <C-c> in that case.
2860 # When a symlink loop is detected, a warning ist printed and further processing is stopped.
2862 # Module zstat is loaded by default in grml zshrc, no extra action needed for that.
2865 # If you happen to come across a symlink that points to a destination on another partition
2866 # with the same inode number, that will be marked as symlink loop though it is not.
2867 # Two hints for this situation:
2868 # I) Play lottery the same day, as you seem to be rather lucky right now.
2873 # 1 file/dir not accesible
2874 # 2 symlink loop detected
2876 #f1# List symlinks in detail (more detailed version of 'readlink -f', 'whence -s' and 'namei -l')
2878 if [[ -z ${1} ]] ; then
2879 printf 'Usage: %s <symlink(s)>\n' "${0}"
2883 local file jumpd curdir
2884 local -i 10 RTN LINODE i
2889 for file in "${@}" ; do
2891 ls -l "${file:a}" || RTN=1
2893 while [[ -h "$file" ]] ; do
2895 LINODE=$(zstat -L +inode "${file}")
2896 for i in ${SEENINODES} ; do
2897 if (( ${i} == ${LINODE} )) ; then
2898 builtin cd -q "${curdir}"
2899 print 'link loop detected, aborting!'
2903 SEENINODES+=${LINODE}
2908 if [[ -d ${jumpd} ]] ; then
2909 builtin cd -q "${jumpd}" || RTN=1
2911 file=$(readlink "$file")
2916 if [[ -d ${jumpd} ]] ; then
2917 builtin cd -q "${jumpd}" || RTN=1
2920 ls -l "${PWD}/${file}" || RTN=1
2923 if (( ${#} >= 1 )) ; then
2926 builtin cd -q "${curdir}"
2931 # TODO: Is it supported to use pager settings like this?
2932 # PAGER='less -Mr' - If so, the use of $PAGER here needs fixing
2933 # with respect to wordsplitting. (ie. ${=PAGER})
2934 if check_com -c $PAGER ; then
2935 #f3# View Debian's changelog of given package(s)
2936 function dchange () {
2938 [[ -z "$1" ]] && printf 'Usage: %s <package_name(s)>\n' "$0" && return 1
2941 for package in "$@" ; do
2942 if [[ -r /usr/share/doc/${package}/changelog.Debian.gz ]] ; then
2943 $PAGER /usr/share/doc/${package}/changelog.Debian.gz
2944 elif [[ -r /usr/share/doc/${package}/changelog.gz ]] ; then
2945 $PAGER /usr/share/doc/${package}/changelog.gz
2946 elif [[ -r /usr/share/doc/${package}/changelog ]] ; then
2947 $PAGER /usr/share/doc/${package}/changelog
2949 if check_com -c aptitude ; then
2950 echo "No changelog for package $package found, using aptitude to retrieve it."
2951 aptitude changelog "$package"
2952 elif check_com -c apt-get ; then
2953 echo "No changelog for package $package found, using apt-get to retrieve it."
2954 apt-get changelog "$package"
2956 echo "No changelog for package $package found, sorry."
2961 function _dchange () { _files -W /usr/share/doc -/ }
2962 compdef _dchange dchange
2964 #f3# View Debian's NEWS of a given package
2967 if [[ -r /usr/share/doc/$1/NEWS.Debian.gz ]] ; then
2968 $PAGER /usr/share/doc/$1/NEWS.Debian.gz
2970 if [[ -r /usr/share/doc/$1/NEWS.gz ]] ; then
2971 $PAGER /usr/share/doc/$1/NEWS.gz
2973 echo "No NEWS file for package $1 found, sorry."
2978 function _dnews () { _files -W /usr/share/doc -/ }
2979 compdef _dnews dnews
2981 #f3# View Debian's copyright of a given package
2982 function dcopyright () {
2984 if [[ -r /usr/share/doc/$1/copyright ]] ; then
2985 $PAGER /usr/share/doc/$1/copyright
2987 echo "No copyright file for package $1 found, sorry."
2991 function _dcopyright () { _files -W /usr/share/doc -/ }
2992 compdef _dcopyright dcopyright
2994 #f3# View upstream's changelog of a given package
2995 function uchange () {
2997 if [[ -r /usr/share/doc/$1/changelog.gz ]] ; then
2998 $PAGER /usr/share/doc/$1/changelog.gz
3000 echo "No changelog for package $1 found, sorry."
3004 function _uchange () { _files -W /usr/share/doc -/ }
3005 compdef _uchange uchange
3009 function profile () {
3010 ZSH_PROFILE_RC=1 zsh "$@"
3013 #f1# Edit an alias via zle
3014 function edalias () {
3015 [[ -z "$1" ]] && { echo "Usage: edalias <alias_to_edit>" ; return 1 } || vared aliases'[$1]' ;
3017 compdef _aliases edalias
3019 #f1# Edit a function via zle
3020 function edfunc () {
3021 [[ -z "$1" ]] && { echo "Usage: edfunc <function_to_edit>" ; return 1 } || zed -f "$1" ;
3023 compdef _functions edfunc
3025 # use it e.g. via 'Restart apache2'
3026 #m# f6 Start() \kbd{service \em{process}}\quad\kbd{start}
3027 #m# f6 Restart() \kbd{service \em{process}}\quad\kbd{restart}
3028 #m# f6 Stop() \kbd{service \em{process}}\quad\kbd{stop}
3029 #m# f6 Reload() \kbd{service \em{process}}\quad\kbd{reload}
3030 #m# f6 Force-Reload() \kbd{service \em{process}}\quad\kbd{force-reload}
3031 #m# f6 Status() \kbd{service \em{process}}\quad\kbd{status}
3032 if [[ -d /etc/init.d || -d /etc/service ]] ; then
3033 function __start_stop () {
3034 local action_="${1:l}" # e.g Start/Stop/Restart
3038 local service_target_="$(readlink /etc/init.d/$service_)"
3039 if [[ $service_target_ == "/usr/bin/sv" ]]; then
3041 case "${action_}" in
3042 start) if [[ ! -e /etc/service/$service_ ]]; then
3043 $SUDO ln -s "/etc/sv/$service_" "/etc/service/"
3045 $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
3047 # there is no reload in runits sysv emulation
3048 reload) $SUDO "/etc/init.d/$service_" "force-reload" "$param_" ;;
3049 *) $SUDO "/etc/init.d/$service_" "${action_}" "$param_" ;;
3052 # sysv/sysvinit-utils, upstart
3053 if check_com -c service ; then
3054 $SUDO service "$service_" "${action_}" "$param_"
3056 $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
3061 function _grmlinitd () {
3063 scripts=( /etc/init.d/*(x:t) )
3064 _describe "service startup script" scripts
3067 for i in Start Restart Stop Force-Reload Reload Status ; do
3068 eval "function $i () { __start_stop $i \"\$1\" \"\$2\" ; }"
3069 compdef _grmlinitd $i
3074 #f1# Provides useful information on globbing
3075 function H-Glob () {
3081 p named pipes (FIFOs)
3082 * executable plain files (0100)
3083 % device files (character or block special)
3084 %b block special files
3085 %c character special files
3086 r owner-readable files (0400)
3087 w owner-writable files (0200)
3088 x owner-executable files (0100)
3089 A group-readable files (0040)
3090 I group-writable files (0020)
3091 E group-executable files (0010)
3092 R world-readable files (0004)
3093 W world-writable files (0002)
3094 X world-executable files (0001)
3095 s setuid files (04000)
3096 S setgid files (02000)
3097 t files with the sticky bit (01000)
3099 print *(m-1) # Files modified up to a day ago
3100 print *(a1) # Files accessed a day ago
3101 print *(@) # Just symlinks
3102 print *(Lk+50) # Files bigger than 50 kilobytes
3103 print *(Lk-50) # Files smaller than 50 kilobytes
3104 print **/*.c # All *.c files recursively starting in \$PWD
3105 print **/*.c~file.c # Same as above, but excluding 'file.c'
3106 print (foo|bar).* # Files starting with 'foo' or 'bar'
3107 print *~*.* # All Files that do not contain a dot
3108 chmod 644 *(.^x) # make all plain non-executable files publically readable
3109 print -l *(.c|.h) # Lists *.c and *.h
3110 print **/*(g:users:) # Recursively match all files that are owned by group 'users'
3111 echo /proc/*/cwd(:h:t:s/self//) # Analogous to >ps ax | awk '{print $1}'<"
3113 alias help-zshglob=H-Glob
3115 # grep for running process, like: 'any vim'
3119 if [[ -z "$1" ]] ; then
3120 echo "any - grep for process(es) by keyword" >&2
3121 echo "Usage: any <keyword>" >&2 ; return 1
3123 ps xauwww | grep -i "${grep_options[@]}" "[${1[1]}]${1[2,-1]}"
3128 # After resuming from suspend, system is paging heavily, leading to very bad interactivity.
3129 # taken from $LINUX-KERNELSOURCE/Documentation/power/swsusp.txt
3130 [[ -r /proc/1/maps ]] && \
3131 function deswap () {
3132 print 'Reading /proc/[0-9]*/maps and sending output to /dev/null, this might take a while.'
3133 cat $(sed -ne 's:.* /:/:p' /proc/[0-9]*/maps | sort -u | grep -v '^/dev/') > /dev/null
3134 print 'Finished, running "swapoff -a; swapon -a" may also be useful.'
3137 # a wrapper for vim, that deals with title setting
3139 # set this array to a set of options to vim you always want
3140 # to have set when calling vim (in .zshrc.local), like:
3141 # VIM_OPTIONS=( -p )
3142 # This will cause vim to send every file given on the
3143 # commandline to be send to it's own tab (needs vim7).
3144 if check_com vim; then
3146 VIM_PLEASE_SET_TITLE='yes' command vim ${VIM_OPTIONS} "$@"
3150 ssl_hashes=( sha512 sha256 sha1 md5 )
3152 for sh in ${ssl_hashes}; do
3153 eval 'ssl-cert-'${sh}'() {
3155 if [[ -z $1 ]] ; then
3156 printf '\''usage: %s <file>\n'\'' "ssh-cert-'${sh}'"
3159 openssl x509 -noout -fingerprint -'${sh}' -in $1
3163 function ssl-cert-fingerprints () {
3166 if [[ -z $1 ]] ; then
3167 printf 'usage: ssl-cert-fingerprints <file>\n'
3170 for i in ${ssl_hashes}
3175 function ssl-cert-info () {
3177 if [[ -z $1 ]] ; then
3178 printf 'usage: ssl-cert-info <file>\n'
3181 openssl x509 -noout -text -in $1
3182 ssl-cert-fingerprints $1
3185 # make sure our environment is clean regarding colors
3186 builtin unset -v BLUE RED GREEN CYAN YELLOW MAGENTA WHITE NO_COLOR
3188 # "persistent history"
3189 # just write important commands you always need to $GRML_IMPORTANT_COMMANDS
3190 # defaults for backward compatibility to ~/.important_commands
3191 if [[ -r ~/.important_commands ]] ; then
3192 GRML_IMPORTANT_COMMANDS=~/.important_commands
3194 GRML_IMPORTANT_COMMANDS=${GRML_IMPORTANT_COMMANDS:-${ZDOTDIR:-${HOME}}/.important_commands}
3196 [[ -r ${GRML_IMPORTANT_COMMANDS} ]] && builtin fc -R ${GRML_IMPORTANT_COMMANDS}
3198 # load the lookup subsystem if it's available on the system
3199 zrcautoload lookupinit && lookupinit
3203 # set terminal property (used e.g. by msgid-chooser)
3204 export COLORTERM="yes"
3209 #a2# Execute \kbd{du -sch}
3210 [[ -n "$GRML_NO_SMALL_ALIASES" ]] || alias da='du -sch'
3213 #a2# Execute \kbd{ls -lSrah}
3214 alias dir="command ls -lSrah"
3215 #a2# Only show dot-directories
3216 alias lad='command ls -d .*(/)'
3217 #a2# Only show dot-files
3218 alias lsa='command ls -a .*(.)'
3219 #a2# Only files with setgid/setuid/sticky flag
3220 alias lss='command ls -l *(s,S,t)'
3221 #a2# Only show symlinks
3222 alias lsl='command ls -l *(@)'
3223 #a2# Display only executables
3224 alias lsx='command ls -l *(*)'
3225 #a2# Display world-{readable,writable,executable} files
3226 alias lsw='command ls -ld *(R,W,X.^ND/)'
3227 #a2# Display the ten biggest files
3228 alias lsbig="command ls -flh *(.OL[1,10])"
3229 #a2# Only show directories
3230 alias lsd='command ls -d *(/)'
3231 #a2# Only show empty directories
3232 alias lse='command ls -d *(/^F)'
3233 #a2# Display the ten newest files
3234 alias lsnew="command ls -rtlh *(D.om[1,10])"
3235 #a2# Display the ten oldest files
3236 alias lsold="command ls -rtlh *(D.Om[1,10])"
3237 #a2# Display the ten smallest files
3238 alias lssmall="command ls -Srl *(.oL[1,10])"
3239 #a2# Display the ten newest directories and ten newest .directories
3240 alias lsnewdir="command ls -rthdl *(/om[1,10]) .*(D/om[1,10])"
3241 #a2# Display the ten oldest directories and ten oldest .directories
3242 alias lsolddir="command ls -rthdl *(/Om[1,10]) .*(D/Om[1,10])"
3244 # some useful aliases
3245 #a2# Remove current empty directory. Execute \kbd{cd ..; rmdir \$OLDCWD}
3246 alias rmcdir='cd ..; rmdir $OLDPWD || cd $OLDPWD'
3248 #a2# ssh with StrictHostKeyChecking=no \\&\quad and UserKnownHostsFile unset
3249 alias insecssh='ssh -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
3250 #a2# scp with StrictHostKeyChecking=no \\&\quad and UserKnownHostsFile unset
3251 alias insecscp='scp -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
3253 # work around non utf8 capable software in utf environment via $LANG and luit
3254 if check_com isutfenv && check_com luit ; then
3255 if check_com -c mrxvt ; then
3256 isutfenv && [[ -n "$LANG" ]] && \
3257 alias mrxvt="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit mrxvt"
3260 if check_com -c aterm ; then
3261 isutfenv && [[ -n "$LANG" ]] && \
3262 alias aterm="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit aterm"
3265 if check_com -c centericq ; then
3266 isutfenv && [[ -n "$LANG" ]] && \
3267 alias centericq="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit centericq"
3273 #f5# Backup \kbd{file_or_folder {\rm to} file_or_folder\_timestamp}
3276 local current_date=$(date -u "+%Y%m%dT%H%M%SZ")
3277 local clean keep move verbose result all to_bk
3278 setopt extended_glob
3280 while getopts ":hacmrv" opt; do
3283 c) unset move clean && (( ++keep ));;
3284 m) unset keep clean && (( ++move ));;
3285 r) unset move keep && (( ++clean ));;
3288 bk [-hcmv] FILE [FILE ...]
3289 bk -r [-av] [FILE [FILE ...]]
3290 Backup a file or folder in place and append the timestamp
3291 Remove backups of a file or folder, or all backups in the current directory
3294 -h Display this help text
3295 -c Keep the file/folder as is, create a copy backup using cp(1) (default)
3296 -m Move the file/folder, using mv(1)
3297 -r Remove backups of the specified file or directory, using rm(1). If none
3298 is provided, remove all backups in the current directory.
3299 -a Remove all (even hidden) backups.
3302 The -c, -r and -m options are mutually exclusive. If specified at the same time,
3303 the last one is used.
3305 The return code is the sum of all cp/mv/rm return codes.
3308 \?) bk -h >&2; return 1;;
3311 shift "$((OPTIND-1))"
3312 if (( keep > 0 )); then
3313 if islinux || isfreebsd; then
3314 for to_bk in "$@"; do
3315 cp $verbose -a "${to_bk%/}" "${to_bk%/}_$current_date"
3319 for to_bk in "$@"; do
3320 cp $verbose -pR "${to_bk%/}" "${to_bk%/}_$current_date"
3324 elif (( move > 0 )); then
3325 while (( $# > 0 )); do
3326 mv $verbose "${1%/}" "${1%/}_$current_date"
3330 elif (( clean > 0 )); then
3331 if (( $# > 0 )); then
3332 for to_bk in "$@"; do
3333 rm $verbose -rf "${to_bk%/}"_[0-9](#c8)T([0-1][0-9]|2[0-3])([0-5][0-9])(#c2)Z
3337 if (( all > 0 )); then
3338 rm $verbose -rf *_[0-9](#c8)T([0-1][0-9]|2[0-3])([0-5][0-9])(#c2)Z(D)
3340 rm $verbose -rf *_[0-9](#c8)T([0-1][0-9]|2[0-3])([0-5][0-9])(#c2)Z
3348 #f5# cd to directory and list files
3354 # smart cd function, allows switching to /etc when running 'cd /etc/fstab'
3356 if (( ${#argv} == 1 )) && [[ -f ${1} ]]; then
3357 [[ ! -e ${1:h} ]] && return 1
3358 print "Correcting ${1} to ${1:h}"
3365 #f5# Create Directory and \kbd{cd} to it
3367 if (( ARGC != 1 )); then
3368 printf 'usage: mkcd <new-directory>\n'
3371 if [[ ! -d "$1" ]]; then
3372 command mkdir -p "$1"
3374 printf '`%s'\'' already exists: cd-ing.\n' "$1"
3379 #f5# Create temporary directory and \kbd{cd} to it
3381 builtin cd "$(mktemp -d)"
3385 #f5# List files which have been accessed within the last {\it n} days, {\it n} defaults to 1
3386 function accessed () {
3388 print -l -- *(a-${1:-1})
3391 #f5# List files which have been changed within the last {\it n} days, {\it n} defaults to 1
3392 function changed () {
3394 print -l -- *(c-${1:-1})
3397 #f5# List files which have been modified within the last {\it n} days, {\it n} defaults to 1
3398 function modified () {
3400 print -l -- *(m-${1:-1})
3402 # modified() was named new() in earlier versions, add an alias for backwards compatibility
3403 check_com new || alias new=modified
3405 # use colors when GNU grep with color-support
3406 if (( $#grep_options > 0 )); then
3407 o=${grep_options:+"${grep_options[*]}"}
3408 #a2# Execute \kbd{grep -{}-color=auto}
3409 alias grep='grep '$o
3410 alias egrep='egrep '$o
3415 # 'translate' looks up a word in a file with language-to-language
3416 # translations (field separator should be " : "). A typical wordlist looks
3417 # like the following:
3418 # | english-word : german-translation
3419 # It's also only possible to translate english to german but not reciprocal.
3420 # Use the following oneliner to reverse the sort order:
3421 # $ awk -F ':' '{ print $2" : "$1" "$3 }' \
3422 # /usr/local/lib/words/en-de.ISO-8859-1.vok > ~/.translate/de-en.ISO-8859-1.vok
3423 #f5# Translates a word
3428 translate -l de-en $2
3431 translate -l en-de $2
3434 echo "Usage: $0 { -D | -E }"
3435 echo " -D == German to English"
3436 echo " -E == English to German"
3440 # Usage: simple-extract <file>
3441 # Using option -d deletes the original archive file.
3442 #f5# Smart archive extractor
3443 function simple-extract () {
3445 setopt extended_glob noclobber
3446 local ARCHIVE DELETE_ORIGINAL DECOMP_CMD USES_STDIN USES_STDOUT GZTARGET WGET_CMD
3448 zparseopts -D -E "d=DELETE_ORIGINAL"
3449 for ARCHIVE in "${@}"; do
3451 *(tar.bz2|tbz2|tbz))
3452 DECOMP_CMD="tar -xvjf -"
3457 DECOMP_CMD="tar -xvzf -"
3461 *(tar.xz|txz|tar.lzma))
3462 DECOMP_CMD="tar -xvJf -"
3467 DECOMP_CMD="tar -xvf -"
3472 DECOMP_CMD="unrar x"
3497 DECOMP_CMD="bzip2 -d -c -"
3502 DECOMP_CMD="gzip -d -c -"
3507 DECOMP_CMD="xz -d -c -"
3512 print "ERROR: '$ARCHIVE' has unrecognized archive type." >&2
3518 if ! check_com ${DECOMP_CMD[(w)1]}; then
3519 echo "ERROR: ${DECOMP_CMD[(w)1]} not installed." >&2
3524 GZTARGET="${ARCHIVE:t:r}"
3525 if [[ -f $ARCHIVE ]] ; then
3527 print "Extracting '$ARCHIVE' ..."
3528 if $USES_STDIN; then
3529 if $USES_STDOUT; then
3530 ${=DECOMP_CMD} < "$ARCHIVE" > $GZTARGET
3532 ${=DECOMP_CMD} < "$ARCHIVE"
3535 if $USES_STDOUT; then
3536 ${=DECOMP_CMD} "$ARCHIVE" > $GZTARGET
3538 ${=DECOMP_CMD} "$ARCHIVE"
3541 [[ $? -eq 0 && -n "$DELETE_ORIGINAL" ]] && rm -f "$ARCHIVE"
3543 elif [[ "$ARCHIVE" == (#s)(https|http|ftp)://* ]] ; then
3544 if check_com curl; then
3545 WGET_CMD="curl -L -s -o -"
3546 elif check_com wget; then
3547 WGET_CMD="wget -q -O -"
3548 elif check_com fetch; then
3549 WGET_CMD="fetch -q -o -"
3551 print "ERROR: neither wget, curl nor fetch is installed" >&2
3555 print "Downloading and Extracting '$ARCHIVE' ..."
3556 if $USES_STDIN; then
3557 if $USES_STDOUT; then
3558 ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD} > $GZTARGET
3561 ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD}
3565 if $USES_STDOUT; then
3566 ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE") > $GZTARGET
3568 ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE")
3573 print "ERROR: '$ARCHIVE' is neither a valid file nor a supported URI." >&2
3580 function __archive_or_uri () {
3582 'files:Archives:_files -g "*.(#l)(tar.bz2|tbz2|tbz|tar.gz|tgz|tar.xz|txz|tar.lzma|tar|rar|lzh|7z|zip|jar|deb|bz2|gz|Z|xz|lzma)"' \
3583 '_urls:Remote Archives:_urls'
3586 function _simple_extract () {
3588 '-d[delete original archivefile after extraction]' \
3589 '*:Archive Or Uri:__archive_or_uri'
3591 compdef _simple_extract simple-extract
3592 [[ -n "$GRML_NO_SMALL_ALIASES" ]] || alias se=simple-extract
3594 #f5# Change the xterm title from within GNU-screen
3595 function xtrename () {
3597 if [[ $1 != "-f" ]] ; then
3598 if [[ -z ${DISPLAY} ]] ; then
3599 printf 'xtrename only makes sense in X11.\n'
3605 if [[ -z $1 ]] ; then
3606 printf 'usage: xtrename [-f] "title for xterm"\n'
3607 printf ' renames the title of xterm from _within_ screen.\n'
3608 printf ' also works without screen.\n'
3609 printf ' will not work if DISPLAY is unset, use -f to override.\n'
3612 print -n "\eP\e]0;${1}\C-G\e\\"
3616 # Create small urls via http://goo.gl using curl(1).
3617 # API reference: https://code.google.com/apis/urlshortener/
3620 setopt extended_glob
3622 if [[ -z $1 ]]; then
3623 print "USAGE: zurl <URL>"
3627 local PN url prog api json contenttype item
3632 # Prepend 'http://' to given URL where necessary for later output.
3633 if [[ ${url} != http(s|)://* ]]; then
3637 if check_com -c curl; then
3640 print "curl is not available, but mandatory for ${PN}. Aborting."
3643 api='https://www.googleapis.com/urlshortener/v1/url'
3644 contenttype="Content-Type: application/json"
3645 json="{\"longUrl\": \"${url}\"}"
3646 data=(${(f)"$($prog --silent -H ${contenttype} -d ${json} $api)"})
3647 # Parse the response
3648 for item in "${data[@]}"; do
3653 printf '%s\n' "$item"
3661 #f2# Find history events by search pattern and list them by date.
3662 function whatwhen () {
3664 local usage help ident format_l format_s first_char remain first last
3665 usage='USAGE: whatwhen [options] <searchstring> <search range>'
3666 help='Use `whatwhen -h'\'' for further explanations.'
3667 ident=${(l,${#${:-Usage: }},, ,)}
3668 format_l="${ident}%s\t\t\t%s\n"
3669 format_s="${format_l//(\\t)##/\\t}"
3670 # Make the first char of the word to search for case
3671 # insensitive; e.g. [aA]
3672 first_char=[${(L)1[1]}${(U)1[1]}]
3674 # Default search range is `-100'.
3676 # Optional, just used for `<first> <last>' given.
3680 printf '%s\n\n' 'ERROR: No search string specified. Aborting.'
3681 printf '%s\n%s\n\n' ${usage} ${help} && return 1
3684 printf '%s\n\n' ${usage}
3686 printf $format_l '-h' 'show help text'
3688 print 'SEARCH RANGE:'
3689 printf $format_l "'0'" 'the whole history,'
3690 printf $format_l '-<n>' 'offset to the current history number; (default: -100)'
3691 printf $format_s '<[-]first> [<last>]' 'just searching within a give range'
3692 printf '\n%s\n' 'EXAMPLES:'
3693 printf ${format_l/(\\t)/} 'whatwhen grml' '# Range is set to -100 by default.'
3694 printf $format_l 'whatwhen zsh -250'
3695 printf $format_l 'whatwhen foo 1 99'
3698 printf '%s\n%s\n\n' ${usage} ${help} && return 1
3701 # -l list results on stout rather than invoking $EDITOR.
3702 # -i Print dates as in YYYY-MM-DD.
3703 # -m Search for a - quoted - pattern within the history.
3704 fc -li -m "*${first_char}${remain}*" $first $last
3709 # mercurial related stuff
3710 if check_com -c hg ; then
3711 # gnu like diff for mercurial
3712 # http://www.selenic.com/mercurial/wiki/index.cgi/TipsAndTricks
3713 #f5# GNU like diff for mercurial
3717 for i in $(hg status -marn "$@") ; diff -ubwd <(hg cat "$i") "$i"
3720 # build debian package
3721 #a2# Alias for \kbd{hg-buildpackage}
3722 alias hbp='hg-buildpackage'
3724 # execute commands on the versioned patch-queue from the current repos
3725 [[ -n "$GRML_NO_SMALL_ALIASES" ]] || alias mq='hg -R $(readlink -f $(hg root)/.hg/patches)'
3727 # diffstat for specific version of a mercurial repository
3728 # hgstat => display diffstat between last revision and tip
3729 # hgstat 1234 => display diffstat between revision 1234 and tip
3730 #f5# Diffstat for specific version of a mercurial repos
3731 function hgstat () {
3733 [[ -n "$1" ]] && hg diff -r $1 -r tip | diffstat || hg export tip | diffstat
3736 fi # end of check whether we have the 'hg'-executable
3738 # disable bracketed paste mode for dumb terminals
3739 [[ "$TERM" == dumb ]] && unset zle_bracketed_paste
3741 # grml-small cleanups and workarounds
3743 # The following is used to remove zsh-config-items that do not work
3744 # in grml-small by default.
3745 # If you do not want these adjustments (for whatever reason), set
3746 # $GRMLSMALL_SPECIFIC to 0 in your .zshrc.pre file (which this configuration
3747 # sources if it is there).
3749 if (( GRMLSMALL_SPECIFIC > 0 )) && isgrmlsmall ; then
3754 unalias 'V' &> /dev/null
3755 unfunction vman &> /dev/null
3756 unfunction viless &> /dev/null
3757 unfunction 2html &> /dev/null
3759 # manpages are not in grmlsmall
3760 unfunction manzsh &> /dev/null
3761 unfunction man2 &> /dev/null
3765 # See https://github.com/grml/grml/issues/56
3766 if ! [[ -x ${commands[dig]} ]]; then
3767 function dig_after_all () {
3771 unfunction dig_after_all
3774 if [[ -x ${commands[dig]} ]]; then
3779 printf 'This installation does not include `dig'\'' for size reasons.\n'
3780 printf 'Try `drill'\'' as a light weight alternative.\n'
3784 if [[ -x ${commands[dig]} ]]; then
3786 zle -M 'Found `dig'\'' installed. '
3788 zle -M 'Try `drill'\'' instead of `dig'\''.'
3797 ## genrefcard.pl settings
3799 ### doc strings for external functions from files
3800 #m# f5 grml-wallpaper() Sets a wallpaper (try completion for possible values)
3802 ### example: split functions-search 8,16,24,32
3803 #@# split functions-search 8
3805 ## END OF FILE #################################################################
3806 # vim:filetype=zsh foldmethod=marker autoindent expandtab shiftwidth=4