1 # Filename: /etc/zsh/zshrc
2 # Purpose: config file for zsh (z shell)
3 # Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
4 # Bug-Reports: see http://grml.org/bugs/
5 # License: This file is licensed under the GPL v2.
6 ################################################################################
7 # This file is sourced only for interactive shells. It
8 # should contain commands to set up aliases, functions,
9 # options, key bindings, etc.
11 # Global Order: zshenv, zprofile, zshrc, zlogin
12 ################################################################################
15 # If you are using this file as your ~/.zshrc file, please use ~/.zshrc.pre
16 # and ~/.zshrc.local for your own customisations. The former file is read
17 # before ~/.zshrc, the latter is read after it. Also, consider reading the
18 # refcard and the reference manual for this setup, both available from:
19 # <http://grml.org/zsh/>
22 # If you want to help to improve grml's zsh setup, clone the grml-etc-core
23 # repository from git.grml.org:
24 # git clone git://git.grml.org/grml-etc-core.git
26 # Make your changes, commit them; use 'git format-patch' to create a series
27 # of patches and send those to the following address via 'git send-email':
28 # grml-etc-core@grml.org
30 # Doing so makes sure the right people get your patches for review and
33 # zsh-refcard-tag documentation:
34 # You may notice strange looking comments in this file.
35 # These are there for a purpose. grml's zsh-refcard can now be
36 # automatically generated from the contents of the actual configuration
37 # file. However, we need a little extra information on which comments
38 # and what lines of code to take into account (and for what purpose).
40 # Here is what they mean:
42 # List of tags (comment types) used:
43 # #a# Next line contains an important alias, that should
44 # be included in the grml-zsh-refcard.
45 # (placement tag: @@INSERT-aliases@@)
46 # #f# Next line contains the beginning of an important function.
47 # (placement tag: @@INSERT-functions@@)
48 # #v# Next line contains an important variable.
49 # (placement tag: @@INSERT-variables@@)
50 # #k# Next line contains an important keybinding.
51 # (placement tag: @@INSERT-keybindings@@)
52 # #d# Hashed directories list generation:
53 # start denotes the start of a list of 'hash -d'
55 # end denotes its end.
56 # (placement tag: @@INSERT-hasheddirs@@)
57 # #A# Abbreviation expansion list generation:
58 # start denotes the beginning of abbreviations.
59 # end denotes their end.
60 # Lines within this section that end in '#d .*' provide
61 # extra documentation to be included in the refcard.
62 # (placement tag: @@INSERT-abbrev@@)
63 # #m# This tag allows you to manually generate refcard entries
64 # for code lines that are hard/impossible to parse.
66 # #m# k ESC-h Call the run-help function
67 # That would add a refcard entry in the keybindings table
68 # for 'ESC-h' with the given comment.
69 # So the syntax is: #m# <section> <argument> <comment>
70 # #o# This tag lets you insert entries to the 'other' hash.
71 # Generally, this should not be used. It is there for
72 # things that cannot be done easily in another way.
73 # (placement tag: @@INSERT-other-foobar@@)
75 # All of these tags (except for m and o) take two arguments, the first
76 # within the tag, the other after the tag:
78 # #<tag><section># <comment>
80 # Where <section> is really just a number, which are defined by the
81 # @secmap array on top of 'genrefcard.pl'. The reason for numbers
82 # instead of names is, that for the reader, the tag should not differ
83 # much from a regular comment. For zsh, it is a regular comment indeed.
84 # The numbers have got the following meanings:
93 # So, the following will add an entry to the 'functions' table in the
94 # 'system' section, with a (hopefully) descriptive comment:
95 # #f1# Edit an alias via zle
98 # It will then show up in the @@INSERT-aliases-system@@ replacement tag
99 # that can be found in 'grml-zsh-refcard.tex.in'.
100 # If the section number is omitted, the 'default' section is assumed.
101 # Furthermore, in 'grml-zsh-refcard.tex.in' @@INSERT-aliases@@ is
102 # exactly the same as @@INSERT-aliases-default@@. If you want a list of
103 # *all* aliases, for example, use @@INSERT-aliases-all@@.
106 # just execute 'ZSH_PROFILE_RC=1 zsh' and run 'zprof' to get the details
107 if [[ $ZSH_PROFILE_RC -gt 0 ]] ; then
111 # load .zshrc.pre to give the user the chance to overwrite the defaults
112 [[ -r ${ZDOTDIR:-${HOME}}/.zshrc.pre ]] && source ${ZDOTDIR:-${HOME}}/.zshrc.pre
114 # check for version/system
115 # check for versions (compatibility reasons)
117 [[ $ZSH_VERSION == <4->* ]] && return 0
122 [[ $ZSH_VERSION == 4.<1->* || $ZSH_VERSION == <5->* ]] && return 0
127 [[ $ZSH_VERSION == 4.<2->* || $ZSH_VERSION == <5->* ]] && return 0
132 [[ $ZSH_VERSION == 4.2.<5->* || $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0
137 [[ $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0
142 [[ $ZSH_VERSION == 4.3.<3->* || $ZSH_VERSION == 4.<4->* \
143 || $ZSH_VERSION == <5->* ]] && return 0
148 [[ $ZSH_VERSION == 4.3.<9->* || $ZSH_VERSION == 4.<4->* \
149 || $ZSH_VERSION == <5->* ]] && return 0
153 #f1# Checks whether or not you're running grml
155 [[ -f /etc/grml_version ]] && return 0
159 #f1# Checks whether or not you're running a grml cd
161 [[ -f /etc/grml_cd ]] && return 0
166 #f1# Checks whether or not you're running grml-small
168 if [[ ${${${(f)"$(</etc/grml_version)"}%% *}##*-} == 'small' ]]; then
174 isgrmlsmall() { return 1 }
178 [[ $OSTYPE == darwin* ]] && return 0
183 [[ $OSTYPE == freebsd* ]] && return 0
187 #f1# are we running within an utf environment?
189 case "$LANG $CHARSET $LANGUAGE" in
196 # check for user, if not running as root set $SUDO to sudo
197 (( EUID != 0 )) && SUDO='sudo' || SUDO=''
199 # change directory to home on first invocation of zsh
200 # important for rungetty -> autologin
201 # Thanks go to Bart Schaefer!
202 isgrml && checkhome() {
203 if [[ -z "$ALREADY_DID_CD_HOME" ]] ; then
204 export ALREADY_DID_CD_HOME=$HOME
209 # check for zsh v3.1.7+
211 if ! [[ ${ZSH_VERSION} == 3.1.<7->* \
212 || ${ZSH_VERSION} == 3.<2->.<->* \
213 || ${ZSH_VERSION} == <4->.<->* ]] ; then
216 printf '-!- In this configuration we try to make use of features, that only\n'
217 printf '-!- require version 3.1.7 of the shell; That way this setup can be\n'
218 printf '-!- used with a wide range of zsh versions, while using fairly\n'
219 printf '-!- advanced features in all supported versions.\n'
221 printf '-!- However, you are running zsh version %s.\n' "$ZSH_VERSION"
223 printf '-!- While this *may* work, it might as well fail.\n'
224 printf '-!- Please consider updating to at least version 3.1.7 of zsh.\n'
226 printf '-!- DO NOT EXPECT THIS TO WORK FLAWLESSLY!\n'
227 printf '-!- If it does today, you'\''ve been lucky.\n'
229 printf '-!- Ye been warned!\n'
232 function zstyle() { : }
235 # autoload wrapper - use this one instead of autoload directly
236 # We need to define this function as early as this, because autoloading
237 # 'is-at-least()' needs it.
238 function zrcautoload() {
246 for fdir in ${fpath} ; do
247 [[ -e ${fdir}/${ffile} ]] && (( ffound = 1 ))
250 (( ffound == 0 )) && return 1
251 if [[ $ZSH_VERSION == 3.1.<6-> || $ZSH_VERSION == <4->* ]] ; then
252 autoload -U ${ffile} || return 1
254 autoload ${ffile} || return 1
259 # Load is-at-least() for more precise version checks Note that this test will
260 # *always* fail, if the is-at-least function could not be marked for
262 zrcautoload is-at-least || is-at-least() { return 1 }
264 # set some important options (as early as possible)
266 # append history list to the history file; this is the default but we make sure
267 # because it's required for share_history.
268 setopt append_history
270 # import new commands from the history file also in other zsh-session
271 is4 && setopt share_history
273 # save each command's beginning timestamp and the duration to the history file
274 setopt extended_history
276 # If a new command line being added to the history list duplicates an older
277 # one, the older command is removed from the list
278 is4 && setopt histignorealldups
280 # remove command lines from the history list when the first character on the
282 setopt histignorespace
284 # if a command is issued that can't be executed as a normal command, and the
285 # command is the name of a directory, perform the cd command to that directory.
288 # in order to use #, ~ and ^ for filename generation grep word
289 # *~(*.gz|*.bz|*.bz2|*.zip|*.Z) -> searches for word not in compressed files
290 # don't forget to quote '^', '~' and '#'!
293 # display PID when suspending processes as well
296 # try to avoid the 'zsh: no matches found...'
299 # report the status of backgrounds jobs immediately
302 # whenever a command completion is attempted, make sure the entire command path
306 # not just at the end
307 setopt completeinword
309 # Don't send SIGHUP to background processes when the shell exits.
312 # make cd push the old directory onto the directory stack.
318 # don't push the same dir twice.
319 setopt pushd_ignore_dups
321 # * shouldn't match dotfiles. ever.
324 # use zsh style word splitting
327 # don't error out when unset parameters are used
330 # setting some default values
333 NOPRECMD=${NOPRECMD:-0}
334 COMMAND_NOT_FOUND=${COMMAND_NOT_FOUND:-0}
335 GRML_ZSH_CNF_HANDLER=${GRML_ZSH_CNF_HANDLER:-/usr/share/command-not-found/command-not-found}
336 BATTERY=${BATTERY:-0}
337 GRMLSMALL_SPECIFIC=${GRMLSMALL_SPECIFIC:-1}
338 ZSH_NO_DEFAULT_LOCALE=${ZSH_NO_DEFAULT_LOCALE:-0}
340 typeset -ga ls_options
341 typeset -ga grep_options
342 if ls --help 2> /dev/null | grep -q GNU; then
343 ls_options=( --color=auto )
344 elif [[ $OSTYPE == freebsd* ]]; then
347 if grep --help 2> /dev/null | grep -q GNU || \
348 [[ $OSTYPE == freebsd* ]]; then
349 grep_options=( --color=auto )
353 # this function checks if a command exists and returns either true
354 # or false. This avoids using 'which' and 'whence', which will
355 # avoid problems with aliases for which on certain weird systems. :-)
356 # Usage: check_com [-c|-g] word
357 # -c only checks for external commands
358 # -g does the usual tests and also checks for global aliases
361 local -i comonly gatoo
363 if [[ $1 == '-c' ]] ; then
366 elif [[ $1 == '-g' ]] ; then
373 if (( ${#argv} != 1 )) ; then
374 printf 'usage: check_com [-c] <command>\n' >&2
378 if (( comonly > 0 )) ; then
379 [[ -n ${commands[$1]} ]] && return 0
383 if [[ -n ${commands[$1]} ]] \
384 || [[ -n ${functions[$1]} ]] \
385 || [[ -n ${aliases[$1]} ]] \
386 || [[ -n ${reswords[(r)$1]} ]] ; then
391 if (( gatoo > 0 )) && [[ -n ${galiases[$1]} ]] ; then
398 # creates an alias and precedes the command with
399 # sudo if $EUID is not zero.
402 local only=0 ; local multi=0
403 while [[ $1 == -* ]] ; do
407 (--) shift ; break ;;
409 printf 'usage: salias [-h|-o|-a] <alias-expression>\n'
410 printf ' -h shows this help text.\n'
411 printf ' -a replace '\'' ; '\'' sequences with '\'' ; sudo '\''.\n'
412 printf ' be careful using this option.\n'
413 printf ' -o only sets an alias if a preceding sudo would be needed.\n'
416 (*) printf "unkown option: '%s'\n" "$1" ; return 1 ;;
421 if (( ${#argv} > 1 )) ; then
422 printf 'Too many arguments %s\n' "${#argv}"
426 key="${1%%\=*}" ; val="${1#*\=}"
427 if (( EUID == 0 )) && (( only == 0 )); then
428 alias -- "${key}=${val}"
429 elif (( EUID > 0 )) ; then
430 (( multi > 0 )) && val="${val// ; / ; sudo }"
431 alias -- "${key}=sudo ${val}"
437 # a "print -l ${(u)foo}"-workaround for pre-4.2.0 shells
439 # Where foo is the *name* of the parameter you want printed.
440 # Note that foo is no typo; $foo would be wrong here!
448 if [[ -z ${parameter} ]] ; then
449 printf 'usage: uprint <parameter>\n'
453 for w in ${(P)parameter} ; do
454 [[ -z ${(M)u:#$w} ]] && u=( $u $w )
461 # Check if we can read given files and source those we can.
463 if (( ${#argv} < 1 )) ; then
464 printf 'usage: xsource FILE(s)...\n' >&2
468 while (( ${#argv} > 0 )) ; do
469 [[ -r "$1" ]] && source "$1"
475 # Check if we can read a given file and 'cat(1)' it.
478 if (( ${#argv} != 1 )) ; then
479 printf 'usage: xcat FILE\n' >&2
483 [[ -r $1 ]] && cat $1
487 # Remove these functions again, they are of use only in these
488 # setup files. This should be called at the end of .zshrc.
492 funcs=(salias xcat xsource xunfunction zrcautoload)
494 for func in $funcs ; do
495 [[ -n ${functions[$func]} ]] \
501 # this allows us to stay in sync with grml's zshrc and put own
502 # modifications in ~/.zshrc.local
504 xsource "/etc/zsh/zshrc.local"
505 xsource "${ZDOTDIR:-${HOME}}/.zshrc.local"
510 if (( ZSH_NO_DEFAULT_LOCALE == 0 )); then
511 xsource "/etc/default/locale"
514 for var in LANG LC_ALL LC_MESSAGES ; do
515 [[ -n ${(P)var} ]] && export $var
518 xsource "/etc/sysconfig/keyboard"
520 TZ=$(xcat /etc/timezone)
523 if check_com -c vim ; then
525 export EDITOR=${EDITOR:-vim}
527 export EDITOR=${EDITOR:-vi}
531 export PAGER=${PAGER:-less}
534 export MAIL=${MAIL:-/var/mail/$USER}
536 # if we don't set $SHELL then aterm, rxvt,.. will use /bin/sh or /bin/bash :-/
537 export SHELL='/bin/zsh'
539 # color setup for ls:
540 check_com -c dircolors && eval $(dircolors -b)
541 # color setup for ls on OS X / FreeBSD:
542 isdarwin && export CLICOLOR=1
543 isfreebsd && export CLICOLOR=1
545 # do MacPorts setup on darwin
546 if isdarwin && [[ -d /opt/local ]]; then
547 # Note: PATH gets set in /etc/zprofile on Darwin, so this can't go into
549 PATH="/opt/local/bin:/opt/local/sbin:$PATH"
550 MANPATH="/opt/local/share/man:$MANPATH"
552 # do Fink setup on darwin
553 isdarwin && xsource /sw/bin/init.sh
555 # load our function and completion directories
556 for fdir in /usr/share/grml/zsh/completion /usr/share/grml/zsh/functions; do
557 fpath=( ${fdir} ${fdir}/**/*(/N) ${fpath} )
558 if [[ ${fdir} == '/usr/share/grml/zsh/functions' ]] ; then
559 for func in ${fdir}/**/[^_]*[^~](N.) ; do
560 zrcautoload ${func:t}
566 # support colors in less
567 export LESS_TERMCAP_mb=$'\E[01;31m'
568 export LESS_TERMCAP_md=$'\E[01;31m'
569 export LESS_TERMCAP_me=$'\E[0m'
570 export LESS_TERMCAP_se=$'\E[0m'
571 export LESS_TERMCAP_so=$'\E[01;44;33m'
572 export LESS_TERMCAP_ue=$'\E[0m'
573 export LESS_TERMCAP_us=$'\E[01;32m'
578 # report about cpu-/system-/user-time of command if running longer than
582 # watch for everyone but me and root
585 # automatically remove duplicates from these arrays
586 typeset -U path cdpath fpath manpath
588 # Remove zle-line-{init,finish} if it looks like it turns smkx. This would be
589 # better fixed by working with those modes too, but we use way too many
590 # hardcoded bindings for now.
591 function remove_widget () {
594 if (( ${+functions[$name]} )) && [[ ${functions[$name]} == *${cap}* ]]; then
595 local w=${widgets[$name]}
597 [[ $w == user:* ]] && unfunction ${w#*:}
600 remove_widget zle-line-init smkx
601 remove_widget zle-line-finish rmkx
602 unfunction remove_widget
605 if [[ "$TERM" != emacs ]] ; then
606 [[ -z "$terminfo[kdch1]" ]] || bindkey -M emacs "$terminfo[kdch1]" delete-char
607 [[ -z "$terminfo[khome]" ]] || bindkey -M emacs "$terminfo[khome]" beginning-of-line
608 [[ -z "$terminfo[kend]" ]] || bindkey -M emacs "$terminfo[kend]" end-of-line
609 [[ -z "$terminfo[kdch1]" ]] || bindkey -M vicmd "$terminfo[kdch1]" vi-delete-char
610 [[ -z "$terminfo[khome]" ]] || bindkey -M vicmd "$terminfo[khome]" vi-beginning-of-line
611 [[ -z "$terminfo[kend]" ]] || bindkey -M vicmd "$terminfo[kend]" vi-end-of-line
612 [[ -z "$terminfo[cuu1]" ]] || bindkey -M viins "$terminfo[cuu1]" vi-up-line-or-history
613 [[ -z "$terminfo[cuf1]" ]] || bindkey -M viins "$terminfo[cuf1]" vi-forward-char
614 [[ -z "$terminfo[kcuu1]" ]] || bindkey -M viins "$terminfo[kcuu1]" vi-up-line-or-history
615 [[ -z "$terminfo[kcud1]" ]] || bindkey -M viins "$terminfo[kcud1]" vi-down-line-or-history
616 [[ -z "$terminfo[kcuf1]" ]] || bindkey -M viins "$terminfo[kcuf1]" vi-forward-char
617 [[ -z "$terminfo[kcub1]" ]] || bindkey -M viins "$terminfo[kcub1]" vi-backward-char
619 [[ "$terminfo[kcuu1]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kcuu1]/O/[}" vi-up-line-or-history
620 [[ "$terminfo[kcud1]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kcud1]/O/[}" vi-down-line-or-history
621 [[ "$terminfo[kcuf1]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kcuf1]/O/[}" vi-forward-char
622 [[ "$terminfo[kcub1]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kcub1]/O/[}" vi-backward-char
623 [[ "$terminfo[khome]" == $'\eO'* ]] && bindkey -M viins "${terminfo[khome]/O/[}" beginning-of-line
624 [[ "$terminfo[kend]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kend]/O/[}" end-of-line
625 [[ "$terminfo[khome]" == $'\eO'* ]] && bindkey -M emacs "${terminfo[khome]/O/[}" beginning-of-line
626 [[ "$terminfo[kend]" == $'\eO'* ]] && bindkey -M emacs "${terminfo[kend]/O/[}" end-of-line
629 ## keybindings (run 'bindkeys' for details, more details via man zshzle)
630 # use emacs style per default:
635 ## beginning-of-line OR beginning-of-buffer OR beginning of history
636 ## by: Bart Schaefer <schaefer@brasslantern.com>, Bernhard Tittelbach
637 beginning-or-end-of-somewhere() {
639 if [[ ( "${LBUFFER[-1]}" == $'\n' && "${WIDGET}" == beginning-of* ) || \
640 ( "${RBUFFER[1]}" == $'\n' && "${WIDGET}" == end-of* ) ]]; then
641 zle .${WIDGET:s/somewhere/buffer-or-history/} "$@"
643 zle .${WIDGET:s/somewhere/line-hist/} "$@"
644 if (( HISTNO != hno )); then
645 zle .${WIDGET:s/somewhere/buffer-or-history/} "$@"
649 zle -N beginning-of-somewhere beginning-or-end-of-somewhere
650 zle -N end-of-somewhere beginning-or-end-of-somewhere
653 #if [[ "$TERM" == screen ]] ; then
655 ## with HOME/END, move to beginning/end of line (on multiline) on first keypress
656 ## to beginning/end of buffer on second keypress
657 ## and to beginning/end of history on (at most) the third keypress
658 # terminator & non-debian xterm
659 bindkey '\eOH' beginning-of-somewhere # home
660 bindkey '\eOF' end-of-somewhere # end
662 bindkey '\e[H' beginning-of-somewhere # home
663 bindkey '\e[F' end-of-somewhere # end
664 # xterm,gnome-terminal,quake,etc
665 bindkey '^[[1~' beginning-of-somewhere # home
666 bindkey '^[[4~' end-of-somewhere # end
667 # if terminal type is set to 'rxvt':
668 bindkey '\e[7~' beginning-of-somewhere # home
669 bindkey '\e[8~' end-of-somewhere # end
672 bindkey '\e[A' up-line-or-search # cursor up
673 bindkey '\e[B' down-line-or-search # <ESC>-
675 ## use Ctrl-left-arrow and Ctrl-right-arrow for jumping to word-beginnings on the CL
676 bindkey "\e[5C" forward-word
677 bindkey "\e[5D" backward-word
678 bindkey "\e[1;5C" forward-word
679 bindkey "\e[1;5D" backward-word
680 ## the same for alt-left-arrow and alt-right-arrow
681 bindkey '^[[1;3C' forward-word
682 bindkey '^[[1;3D' backward-word
684 # Search backward in the history for a line beginning with the current
685 # line up to the cursor and move the cursor to the end of the line then
686 zle -N history-beginning-search-backward-end history-search-end
687 zle -N history-beginning-search-forward-end history-search-end
688 #k# search history backward for entry beginning with typed text
689 bindkey '^xp' history-beginning-search-backward-end
690 #k# search history forward for entry beginning with typed text
691 bindkey '^xP' history-beginning-search-forward-end
692 #k# search history backward for entry beginning with typed text
693 bindkey "\e[5~" history-beginning-search-backward-end # PageUp
694 #k# search history forward for entry beginning with typed text
695 bindkey "\e[6~" history-beginning-search-forward-end # PageDown
697 # bindkey -s '^l' "|less\n" # ctrl-L pipes to less
698 # bindkey -s '^b' " &\n" # ctrl-B runs it in the background
700 # insert unicode character
701 # usage example: 'ctrl-x i' 00A7 'ctrl-x i' will give you an §
702 # See for example http://unicode.org/charts/ for unicode characters code
703 zrcautoload insert-unicode-char
704 zle -N insert-unicode-char
705 #k# Insert Unicode character
706 bindkey '^xi' insert-unicode-char
708 #m# k Shift-tab Perform backwards menu completion
709 if [[ -n "$terminfo[kcbt]" ]]; then
710 bindkey "$terminfo[kcbt]" reverse-menu-complete
711 elif [[ -n "$terminfo[cbt]" ]]; then # required for GNU screen
712 bindkey "$terminfo[cbt]" reverse-menu-complete
715 ## toggle the ,. abbreviation feature on/off
716 # NOABBREVIATION: default abbreviation-state
717 # 0 - enabled (default)
719 NOABBREVIATION=${NOABBREVIATION:-0}
721 grml_toggle_abbrev() {
722 if (( ${NOABBREVIATION} > 0 )) ; then
729 #k# Toggle abbreviation expansion on/off
730 zle -N grml_toggle_abbrev
731 bindkey '^xA' grml_toggle_abbrev
733 # add a command line to the shells history without executing it
734 commit-to-history() {
735 print -s ${(z)BUFFER}
738 zle -N commit-to-history
739 bindkey "^x^h" commit-to-history
741 # only slash should be considered as a word separator:
742 slash-backward-kill-word() {
743 local WORDCHARS="${WORDCHARS:s@/@}"
745 zle backward-kill-word
747 zle -N slash-backward-kill-word
749 #k# Kill left-side word or everything up to next slash
750 bindkey '\ev' slash-backward-kill-word
751 #k# Kill left-side word or everything up to next slash
752 bindkey '\e^h' slash-backward-kill-word
753 #k# Kill left-side word or everything up to next slash
754 bindkey '\e^?' slash-backward-kill-word
756 # use the new *-pattern-* widgets for incremental history search
758 bindkey '^r' history-incremental-pattern-search-backward
759 bindkey '^s' history-incremental-pattern-search-forward
762 # a generic accept-line wrapper
764 # This widget can prevent unwanted autocorrections from command-name
765 # to _command-name, rehash automatically on enter and call any number
766 # of builtin and user-defined widgets in different contexts.
768 # For a broader description, see:
769 # <http://bewatermyfriend.org/posts/2007/12-26.11-50-38-tooltime.html>
771 # The code is imported from the file 'zsh/functions/accept-line' from
772 # <http://ft.bewatermyfriend.org/comp/zsh/zsh-dotfiles.tar.bz2>, which
773 # distributed under the same terms as zsh itself.
775 # A newly added command will may not be found or will cause false
776 # correction attempts, if you got auto-correction set. By setting the
777 # following style, we force accept-line() to rehash, if it cannot
778 # find the first word on the command line in the $command[] hash.
779 zstyle ':acceptline:*' rehash true
781 function Accept-Line() {
782 setopt localoptions noksharrays
786 local alcontext=${1:-$alcontext}
788 zstyle -a ":acceptline:${alcontext}" actions subs
790 (( ${#subs} < 1 )) && return 0
793 for sub in ${subs} ; do
794 [[ ${sub} == 'accept-line' ]] && sub='.accept-line'
797 (( aldone > 0 )) && break
801 function Accept-Line-getdefault() {
805 zstyle -s ":acceptline:${alcontext}" default_action default_action
806 case ${default_action} in
808 printf ".accept-line"
811 printf ${default_action}
816 function Accept-Line-HandleContext() {
819 default_action=$(Accept-Line-getdefault)
820 zstyle -T ":acceptline:${alcontext}" call_default \
821 && zle ${default_action}
824 function accept-line() {
825 setopt localoptions noksharrays
828 local buf com fname format msg default_action
832 cmdline=(${(z)BUFFER})
836 Accept-Line 'preprocess'
838 zstyle -t ":acceptline:${alcontext}" rehash \
839 && [[ -z ${commands[$com]} ]] \
843 && [[ -n ${reswords[(r)$com]} ]] \
844 || [[ -n ${aliases[$com]} ]] \
845 || [[ -n ${functions[$com]} ]] \
846 || [[ -n ${builtins[$com]} ]] \
847 || [[ -n ${commands[$com]} ]] ; then
849 # there is something sensible to execute, just do it.
851 Accept-Line-HandleContext
856 if [[ -o correct ]] \
857 || [[ -o correctall ]] \
858 && [[ -n ${functions[$fname]} ]] ; then
860 # nothing there to execute but there is a function called
861 # _command_name; a completion widget. Makes no sense to
862 # call it on the commandline, but the correct{,all} options
863 # will ask for it nevertheless, so warn the user.
864 if [[ ${LASTWIDGET} == 'accept-line' ]] ; then
865 # Okay, we warned the user before, he called us again,
866 # so have it his way.
868 Accept-Line-HandleContext
873 if zstyle -t ":acceptline:${alcontext}" nocompwarn ; then
875 Accept-Line-HandleContext
877 # prepare warning message for the user, configurable via zstyle.
878 zstyle -s ":acceptline:${alcontext}" compwarnfmt msg
880 if [[ -z ${msg} ]] ; then
881 msg="%c will not execute and completion %f exists."
884 zformat -f msg "${msg}" "c:${com}" "f:${fname}"
889 elif [[ -n ${buf//[$' \t\n']##/} ]] ; then
890 # If we are here, the commandline contains something that is not
891 # executable, which is neither subject to _command_name correction
892 # and is not empty. might be a variable assignment
894 Accept-Line-HandleContext
899 # If we got this far, the commandline only contains whitespace, or is empty.
901 Accept-Line-HandleContext
906 zle -N Accept-Line-HandleContext
908 # power completion - abbreviation expansion
909 # power completion / abbreviation expansion / buffer expansion
910 # see http://zshwiki.org/home/examples/zleiab for details
911 # less risky than the global aliases but powerful as well
912 # just type the abbreviation key and afterwards ',.' to expand it
915 setopt interactivecomments
917 # key # value (#d additional doc string)
923 'G' '|& grep '${grep_options:+"${grep_options[*]}"}
925 'Hl' ' --help |& less -r' #d (Display help in pager)
929 'N' '&>/dev/null' #d (No Output)
930 'R' '| tr A-z N-za-m' #d (ROT13)
936 'co' './configure && make && sudo make install'
944 if (( NOABBREVIATION > 0 )) ; then
945 LBUFFER="${LBUFFER},."
949 LBUFFER=${LBUFFER%%(#m)[.\-+:|_a-zA-Z0-9]#}
950 LBUFFER+=${abk[$MATCH]:-$MATCH}
953 zle -N zleiab && bindkey ",." zleiab
955 #f# display contents of assoc array $abk
958 zle -M "$(print "Type ,. after these abbreviations to expand them:"; print -a -C 2 ${(kv)abk})"
960 #k# Display list of abbreviations that expand when followed by ,.
961 zle -N help-show-abk && bindkey '^xb' help-show-abk
964 zrcautoload zmv # who needs mmv or rename?
965 zrcautoload history-search-end
967 # we don't want to quote/espace URLs on our own...
968 # if autoload -U url-quote-magic ; then
969 # zle -N self-insert url-quote-magic
970 # zstyle ':url-quote-magic:*' url-metas '*?[]^()~#{}='
972 # print 'Notice: no url-quote-magic available :('
974 alias url-quote='autoload -U url-quote-magic ; zle -N self-insert url-quote-magic'
976 #m# k ESC-h Call \kbd{run-help} for the 1st word on the command line
977 alias run-help >&/dev/null && unalias run-help
978 for rh in run-help{,-git,-svk,-svn}; do
983 if zrcautoload compinit ; then
984 compinit || print 'Notice: no compinit available :('
986 print 'Notice: no compinit available :('
990 is4 && zrcautoload zed # use ZLE editor to edit a file or function
993 for mod in complist deltochar mathfunc ; do
994 zmodload -i zsh/${mod} 2>/dev/null || print "Notice: no ${mod} available :("
997 # autoload zsh modules when they are referenced
999 zmodload -a zsh/stat zstat
1000 zmodload -a zsh/zpty zpty
1001 zmodload -ap zsh/mapfile mapfile
1004 if is4 && zrcautoload insert-files && zle -N insert-files ; then
1005 #k# Insert files and test globbing
1006 bindkey "^xf" insert-files # C-x-f
1009 bindkey ' ' magic-space # also do history expansion on space
1010 #k# Trigger menu-complete
1011 bindkey '\ei' menu-complete # menu completion via esc-i
1013 # press esc-e for editing command line in $EDITOR or $VISUAL
1014 if is4 && zrcautoload edit-command-line && zle -N edit-command-line ; then
1015 #k# Edit the current line in \kbd{\$EDITOR}
1016 bindkey '\ee' edit-command-line
1019 if is4 && [[ -n ${(k)modules[zsh/complist]} ]] ; then
1020 #k# menu selection: pick item but stay in the menu
1021 bindkey -M menuselect '\e^M' accept-and-menu-complete
1022 # also use + and INSERT since it's easier to press repeatedly
1023 bindkey -M menuselect "+" accept-and-menu-complete
1024 bindkey -M menuselect "^[[2~" accept-and-menu-complete
1026 # accept a completion and try to complete again by using menu
1027 # completion; very useful with completing directories
1028 # by using 'undo' one's got a simple file browser
1029 bindkey -M menuselect '^o' accept-and-infer-next-history
1032 # press "ctrl-e d" to insert the actual date in the form yyyy-mm-dd
1033 insert-datestamp() { LBUFFER+=${(%):-'%D{%Y-%m-%d}'}; }
1034 zle -N insert-datestamp
1036 #k# Insert a timestamp on the command line (yyyy-mm-dd)
1037 bindkey '^ed' insert-datestamp
1039 # press esc-m for inserting last typed word again (thanks to caphuso!)
1040 insert-last-typed-word() { zle insert-last-word -- 0 -1 };
1041 zle -N insert-last-typed-word;
1043 #k# Insert last typed word
1044 bindkey "\em" insert-last-typed-word
1046 function grml-zsh-fg() {
1047 if (( ${#jobstates} )); then
1049 [[ -o hist_ignore_space ]] && BUFFER=' ' || BUFFER=''
1050 BUFFER="${BUFFER}fg"
1053 zle -M 'No background jobs. Doing nothing.'
1057 #k# A smart shortcut for \kbd{fg<enter>}
1058 bindkey '^z' grml-zsh-fg
1060 # run command line as user root via sudo:
1061 sudo-command-line() {
1062 [[ -z $BUFFER ]] && zle up-history
1063 if [[ $BUFFER != sudo\ * ]]; then
1064 BUFFER="sudo $BUFFER"
1065 CURSOR=$(( CURSOR+5 ))
1068 zle -N sudo-command-line
1070 #k# prepend the current command with "sudo"
1071 bindkey "^os" sudo-command-line
1073 ### jump behind the first word on the cmdline.
1074 ### useful to add options.
1075 function jump_after_first_word() {
1077 words=(${(z)BUFFER})
1079 if (( ${#words} <= 1 )) ; then
1082 CURSOR=${#${words[1]}}
1085 zle -N jump_after_first_word
1086 #k# jump to after first word (for adding options)
1087 bindkey '^x1' jump_after_first_word
1089 # complete word from history with menu (from Book: ZSH, OpenSource-Press)
1090 zle -C hist-complete complete-word _generic
1091 zstyle ':completion:hist-complete:*' completer _history
1092 #k# complete word from history with menu
1093 bindkey "^x^x" hist-complete
1095 ## complete word from currently visible Screen or Tmux buffer.
1096 if check_com -c screen || check_com -c tmux; then
1097 _complete_screen_display() {
1098 [[ "$TERM" != "screen" ]] && return 1
1100 local TMPFILE=$(mktemp)
1101 local -U -a _screen_display_wordlist
1102 trap "rm -f $TMPFILE" EXIT
1104 # fill array with contents from screen hardcopy
1105 if ((${+TMUX})); then
1106 #works, but crashes tmux below version 1.4
1107 #luckily tmux -V option to ask for version, was also added in 1.4
1108 tmux -V &>/dev/null || return
1109 tmux -q capture-pane \; save-buffer -b 0 $TMPFILE \; delete-buffer -b 0
1111 screen -X hardcopy $TMPFILE
1112 # screen sucks, it dumps in latin1, apparently always. so recode it
1114 check_com recode && recode latin1 $TMPFILE
1116 _screen_display_wordlist=( ${(QQ)$(<$TMPFILE)} )
1117 # remove PREFIX to be completed from that array
1118 _screen_display_wordlist[${_screen_display_wordlist[(i)$PREFIX]}]=""
1119 compadd -a _screen_display_wordlist
1121 #k# complete word from currently visible GNU screen buffer
1123 compdef -k _complete_screen_display complete-word '^xS'
1128 ZSHDIR=${ZDOTDIR:-${HOME}/.zsh}
1131 HISTFILE=${ZDOTDIR:-${HOME}}/.zsh_history
1132 isgrmlcd && HISTSIZE=500 || HISTSIZE=5000
1133 isgrmlcd && SAVEHIST=1000 || SAVEHIST=10000 # useful for setopt append_history
1137 DIRSTACKSIZE=${DIRSTACKSIZE:-20}
1138 DIRSTACKFILE=${DIRSTACKFILE:-${ZDOTDIR:-${HOME}}/.zdirs}
1140 if [[ -f ${DIRSTACKFILE} ]] && [[ ${#dirstack[*]} -eq 0 ]] ; then
1141 dirstack=( ${(f)"$(< $DIRSTACKFILE)"} )
1142 # "cd -" won't work after login by just setting $OLDPWD, so
1143 [[ -d $dirstack[1] ]] && cd $dirstack[1] && cd $OLDPWD
1148 my_stack=( ${PWD} ${dirstack} )
1150 builtin print -l ${(u)my_stack} >! ${DIRSTACKFILE}
1152 uprint my_stack >! ${DIRSTACKFILE}
1156 # directory based profiles
1160 # chpwd_profiles(): Directory Profiles, Quickstart:
1164 # zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)' profile grml
1165 # zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian
1168 # For details see the `grmlzshrc.5' manual page.
1169 function chpwd_profiles() {
1170 local profile context
1173 context=":chpwd:profiles:$PWD"
1174 zstyle -s "$context" profile profile || profile='default'
1175 zstyle -T "$context" re-execute && reexecute=1 || reexecute=0
1177 if (( ${+parameters[CHPWD_PROFILE]} == 0 )); then
1178 typeset -g CHPWD_PROFILE
1179 local CHPWD_PROFILES_INIT=1
1180 (( ${+functions[chpwd_profiles_init]} )) && chpwd_profiles_init
1181 elif [[ $profile != $CHPWD_PROFILE ]]; then
1182 (( ${+functions[chpwd_leave_profile_$CHPWD_PROFILE]} )) \
1183 && chpwd_leave_profile_${CHPWD_PROFILE}
1185 if (( reexecute )) || [[ $profile != $CHPWD_PROFILE ]]; then
1186 (( ${+functions[chpwd_profile_$profile]} )) && chpwd_profile_${profile}
1189 CHPWD_PROFILE="${profile}"
1193 chpwd_functions=( ${chpwd_functions} chpwd_profiles )
1197 # display battery status on right side of prompt via running 'BATTERY=1 zsh'
1198 if [[ $BATTERY -gt 0 ]] ; then
1199 if ! check_com -c acpi ; then
1205 if [[ $BATTERY -gt 0 ]] ; then
1206 PERCENT="${${"$(acpi 2>/dev/null)"}/(#b)[[:space:]]#Battery <->: [^0-9]##, (<->)%*/${match[1]}}"
1207 if [[ -z "$PERCENT" ]] ; then
1208 PERCENT='acpi not present'
1210 if [[ "$PERCENT" -lt 20 ]] ; then
1211 PERCENT="warning: ${PERCENT}%%"
1213 PERCENT="${PERCENT}%%"
1218 # set colors for use in prompts
1219 if zrcautoload colors && colors 2>/dev/null ; then
1220 BLUE="%{${fg[blue]}%}"
1221 RED="%{${fg_bold[red]}%}"
1222 GREEN="%{${fg[green]}%}"
1223 CYAN="%{${fg[cyan]}%}"
1224 MAGENTA="%{${fg[magenta]}%}"
1225 YELLOW="%{${fg[yellow]}%}"
1226 WHITE="%{${fg[white]}%}"
1227 NO_COLOR="%{${reset_color}%}"
1229 BLUE=$'%{\e[1;34m%}'
1231 GREEN=$'%{\e[1;32m%}'
1232 CYAN=$'%{\e[1;36m%}'
1233 WHITE=$'%{\e[1;37m%}'
1234 MAGENTA=$'%{\e[1;35m%}'
1235 YELLOW=$'%{\e[1;33m%}'
1236 NO_COLOR=$'%{\e[0m%}'
1239 # gather version control information for inclusion in a prompt
1241 if zrcautoload vcs_info; then
1242 # `vcs_info' in zsh versions 4.3.10 and below have a broken `_realpath'
1243 # function, which can cause a lot of trouble with our directory-based
1245 if [[ ${ZSH_VERSION} == 4.3.<-10> ]] ; then
1246 function VCS_INFO_realpath () {
1247 setopt localoptions NO_shwordsplit chaselinks
1248 ( builtin cd -q $1 2> /dev/null && pwd; )
1252 zstyle ':vcs_info:*' max-exports 2
1254 if [[ -o restricted ]]; then
1255 zstyle ':vcs_info:*' enable NONE
1259 # Change vcs_info formats for the grml prompt. The 2nd format sets up
1260 # $vcs_info_msg_1_ to contain "zsh: repo-name" used to set our screen title.
1261 # TODO: The included vcs_info() version still uses $VCS_INFO_message_N_.
1262 # That needs to be the use of $VCS_INFO_message_N_ needs to be changed
1263 # to $vcs_info_msg_N_ as soon as we use the included version.
1264 if [[ "$TERM" == dumb ]] ; then
1265 zstyle ':vcs_info:*' actionformats "(%s%)-[%b|%a] " "zsh: %r"
1266 zstyle ':vcs_info:*' formats "(%s%)-[%b] " "zsh: %r"
1268 # these are the same, just with a lot of colors:
1269 zstyle ':vcs_info:*' actionformats "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${YELLOW}|${RED}%a${MAGENTA}]${NO_COLOR} " \
1271 zstyle ':vcs_info:*' formats "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${MAGENTA}]${NO_COLOR}%} " \
1273 zstyle ':vcs_info:(sv[nk]|bzr):*' branchformat "%b${RED}:${YELLOW}%r"
1276 # command not found handling
1278 (( ${COMMAND_NOT_FOUND} == 1 )) &&
1279 function command_not_found_handler() {
1281 if [[ -x ${GRML_ZSH_CNF_HANDLER} ]] ; then
1282 ${GRML_ZSH_CNF_HANDLER} $1
1287 function prompt_grml_help () {
1291 This is the prompt as used by the grml-live system <http://grml.org>.
1292 It is a rather simple one-line prompt, that by default looks like this:
1294 <user>@<host> <current-working-directory>[ <vcs_info-data>]%
1296 The prompt itself integrates with zsh's prompt themes system (as you are
1297 witnessing right now) and is configurable to a certain degree. In
1298 particular, these aspects are customisable:
1300 - The items used in the prompt (e.g. you can remove \`user' from
1301 the list of activated items, which will cause the user name to
1302 be omitted from the prompt string).
1304 - The attributes used with the items are customisable via strings
1305 used before and after the actual item.
1307 The available items are: rc, rc-always, change-root, user, at, host, path,
1308 vcs, percent, sad-smiley.
1310 The actual configuration is done via zsh's \`zstyle' mechanism. The
1311 context, that is used while looking up styles is:
1313 ':prompt:grml:<sub-context>'
1315 Here <sub-context> is either 'items:<item>' or 'setup'. The available
1316 styles in the \`setup' context are: use-rprompt, items. For example,
1317 default \`items' style could be configured like this:
1319 zstyle ':prompt:grml:setup' items user at host path \\
1324 - use-rprompt (boolean): If \`true' (the default), print a sad smiley
1325 in $RPROMPT if the last command a returned non-successful error
1328 - items (list): The list of items used in the prompt. If \`vcs' is
1329 present in the list, the theme's code invokes \`vcs_info'
1330 accordingly. Default: rc user change-root at host path vcs precent
1332 Available styles in 'items:<item>' are: pre, post. These are strings that
1333 are inserted before (pre) and after (post) the item in question. Thus, the
1334 following would cause the user name to be printed in red instead of the
1337 zstyle ':prompt:grml:items:user' pre '%F{red}'
1339 Note, that the \`post' style may remain at its default value, because its
1340 default value is '%f', which turns the foreground text attribute off (which
1341 is exactly, what is still required with the new \`pre' value).
1345 function prompt_grml_setup () {
1347 autoload -Uz vcs_info
1348 autoload -Uz add-zsh-hook
1349 add-zsh-hook precmd prompt_grml_precmd
1352 typeset -gA grml_prompt_pre_default \
1353 grml_prompt_post_default \
1354 grml_prompt_token_default
1356 grml_prompt_pre_default=(
1369 grml_prompt_post_default=(
1382 grml_prompt_token_default=(
1385 change-root 'debian_chroot'
1392 sad-smiley '%(?..:()'
1395 function prompt_grml_precmd () {
1398 local it apre apost new v
1401 zstyle -a ':prompt:grml:setup' items items \
1402 || items=( rc change-root user at host path vcs percent )
1404 for it in "${items[@]}"; do
1405 zstyle -s ":prompt:grml:items:$it" pre apre \
1406 || apre=${grml_prompt_pre_default[$it]}
1407 zstyle -s ":prompt:grml:items:$it" post apost \
1408 || apost=${grml_prompt_post_default[$it]}
1409 zstyle -s ":prompt:grml:items:$it" token new \
1410 || new=${grml_prompt_token_default[$it]}
1414 (( ${+parameters[$new]} )) && PS1="${PS1}(${(P)new})"
1417 v="vcs_info_msg_${new}_"
1419 if (( ${+parameters[$v]} )) && [[ -n "${(P)v}" ]]; then
1423 *) PS1="${PS1}${new}" ;;
1425 PS1="${PS1}${apost}"
1427 if zstyle -t ':prompt:grml:setup' use-rprompt; then
1428 zstyle -s ":prompt:grml:items:sad-smiley" token new \
1429 || new=${grml_prompt_token_default[sad-smiley]}
1435 if zrcautoload promptinit && promptinit 2>/dev/null ; then
1436 promptinit # people should be able to use their favourite prompt
1438 # Since we define the required functions in here and not in files in
1439 # $fpath, we need to stick the theme's name into `$prompt_themes'
1440 # ourselves, since promptinit does not pick them up otherwise.
1441 prompt_themes+=( grml )
1442 # Also, keep the array sorted...
1443 prompt_themes=( "${(@on)prompt_themes}" )
1445 print 'Notice: no promptinit available :('
1450 # make sure to use right prompt only when not running a command
1451 is41 && setopt transient_rprompt
1454 function ESC_print () {
1455 info_print $'\ek' $'\e\\' "$@"
1457 function set_title () {
1458 info_print $'\e]0;' $'\a' "$@"
1461 function info_print () {
1462 local esc_begin esc_end
1466 printf '%s' ${esc_begin}
1468 printf '%s' "${esc_end}"
1471 function grml_reset_screen_title () {
1472 # adjust title of xterm
1473 # see http://www.faqs.org/docs/Linux-mini/Xterm-Title.html
1474 [[ ${NOTITLE:-} -gt 0 ]] && return 0
1477 set_title ${(%):-"%n@%m: %~"}
1482 function grml_vcs_to_screen_title () {
1483 if [[ $TERM == screen* ]] ; then
1484 if [[ -n ${vcs_info_msg_1_} ]] ; then
1485 ESC_print ${vcs_info_msg_1_}
1492 zrcautoload add-zsh-hook || add-zsh-hook () { :; }
1493 if [[ $NOPRECMD -gt 0 ]]; then
1494 add-zsh-hook precmd grml_reset_screen_title
1495 add-zsh-hook precmd grml_vcs_to_screen_title
1498 # TODO: revise all these NO* variables and especially their documentation
1499 # in zsh-help() below.
1500 is4 && [[ $NOPRECMD -eq 0 ]] && precmd () {
1501 # just use DONTSETRPROMPT=1 to be able to overwrite RPROMPT
1502 if [[ ${DONTSETRPROMPT:-} -eq 0 ]] ; then
1503 if [[ $BATTERY -gt 0 ]] ; then
1504 # update battery (dropped into $PERCENT) information
1506 RPROMPT="%(?..:() ${PERCENT}"
1513 # preexec() => a function running before every command
1514 is4 && [[ $NOPRECMD -eq 0 ]] && \
1516 [[ $NOPRECMD -gt 0 ]] && return 0
1517 # set hostname if not running on host with name 'grml'
1518 if [[ -n "$HOSTNAME" ]] && [[ "$HOSTNAME" != $(hostname) ]] ; then
1521 # get the name of the program currently running and hostname of local machine
1522 # set screen window title if running in a screen
1523 if [[ "$TERM" == screen* ]] ; then
1524 # local CMD=${1[(wr)^(*=*|sudo|ssh|-*)]} # don't use hostname
1525 local CMD="${1[(wr)^(*=*|sudo|ssh|-*)]}$NAME" # use hostname
1528 # adjust title of xterm
1529 [[ ${NOTITLE} -gt 0 ]] && return 0
1532 set_title "${(%):-"%n@%m:"}" "$1"
1537 EXITCODE="%(?..%?%1v )"
1538 # secondary prompt, printed when the shell needs more information to complete a
1541 # selection prompt used within a select loop.
1543 # the execution trace prompt (setopt xtrace). default: '+%N:%i>'
1546 # set variable debian_chroot if running in a chroot with /etc/debian_chroot
1547 if [[ -z "$debian_chroot" ]] && [[ -r /etc/debian_chroot ]] ; then
1548 debian_chroot=$(cat /etc/debian_chroot)
1551 # don't use colors on dumb terminals (like emacs):
1552 if [[ "$TERM" == dumb ]] ; then
1553 PROMPT="${EXITCODE}${debian_chroot:+($debian_chroot)}%n@%m %40<...<%B%~%b%<< "
1555 # only if $GRMLPROMPT is set (e.g. via 'GRMLPROMPT=1 zsh') use the extended
1556 # prompt set variable identifying the chroot you work in (used in the
1558 if [[ $GRMLPROMPT -gt 0 ]] ; then
1559 PROMPT="${RED}${EXITCODE}${CYAN}[%j running job(s)] ${GREEN}{history#%!} ${RED}%(3L.+.) ${BLUE}%* %D
1560 ${BLUE}%n${NO_COLOR}@%m %40<...<%B%~%b%<< "
1562 # This assembles the primary prompt string
1563 if (( EUID != 0 )); then
1564 PROMPT="${RED}${EXITCODE}${WHITE}${debian_chroot:+($debian_chroot)}${BLUE}%n${NO_COLOR}@%m %40<...<%B%~%b%<< "
1566 PROMPT="${BLUE}${EXITCODE}${WHITE}${debian_chroot:+($debian_chroot)}${RED}%n${NO_COLOR}@%m %40<...<%B%~%b%<< "
1571 PROMPT="${PROMPT}"'${vcs_info_msg_0_}'"%# "
1573 # if we are inside a grml-chroot set a specific prompt theme
1574 if [[ -n "$GRML_CHROOT" ]] ; then
1575 PROMPT="%{$fg[red]%}(CHROOT) %{$fg_bold[red]%}%n%{$fg_no_bold[white]%}@%m %40<...<%B%~%b%<< %\# "
1578 # 'hash' some often used directories
1580 hash -d deb=/var/cache/apt/archives
1581 hash -d doc=/usr/share/doc
1582 hash -d linux=/lib/modules/$(command uname -r)/build/
1583 hash -d log=/var/log
1584 hash -d slog=/var/log/syslog
1585 hash -d src=/usr/src
1586 hash -d templ=/usr/share/doc/grml-templates
1587 hash -d tt=/usr/share/doc/texttools-doc
1588 hash -d www=/var/www
1592 if check_com -c screen ; then
1593 if [[ $UID -eq 0 ]] ; then
1594 if [[ -r /etc/grml/screenrc ]]; then
1595 alias screen="${commands[screen]} -c /etc/grml/screenrc"
1597 elif [[ -r $HOME/.screenrc ]] ; then
1598 alias screen="${commands[screen]} -c $HOME/.screenrc"
1600 if [[ -r /etc/grml/screenrc_grml ]]; then
1601 alias screen="${commands[screen]} -c /etc/grml/screenrc_grml"
1603 if [[ -r /etc/grml/screenrc ]]; then
1604 alias screen="${commands[screen]} -c /etc/grml/screenrc"
1610 # do we have GNU ls with color-support?
1611 if [[ "$TERM" != dumb ]]; then
1612 #a1# execute \kbd{@a@}:\quad ls with colors
1613 alias ls='ls -b -CF '${ls_options:+"${ls_options[*]}"}
1614 #a1# execute \kbd{@a@}:\quad list all files, with colors
1615 alias la='ls -la '${ls_options:+"${ls_options[*]}"}
1616 #a1# long colored list, without dotfiles (@a@)
1617 alias ll='ls -l '${ls_options:+"${ls_options[*]}"}
1618 #a1# long colored list, human readable sizes (@a@)
1619 alias lh='ls -hAl '${ls_options:+"${ls_options[*]}"}
1620 #a1# List files, append qualifier to filenames \\&\quad(\kbd{/} for directories, \kbd{@} for symlinks ...)
1621 alias l='ls -lF '${ls_options:+"${ls_options[*]}"}
1623 alias ls='ls -b -CF'
1630 alias mdstat='cat /proc/mdstat'
1631 alias ...='cd ../../'
1633 # generate alias named "$KERNELVERSION-reboot" so you can use boot with kexec:
1634 if [[ -x /sbin/kexec ]] && [[ -r /proc/cmdline ]] ; then
1635 alias "$(uname -r)-reboot"="kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)""
1638 # see http://www.cl.cam.ac.uk/~mgk25/unicode.html#term for details
1639 alias term2iso="echo 'Setting terminal to iso mode' ; print -n '\e%@'"
1640 alias term2utf="echo 'Setting terminal to utf-8 mode'; print -n '\e%G'"
1642 # make sure it is not assigned yet
1643 [[ -n ${aliases[utf2iso]} ]] && unalias utf2iso
1646 for ENV in $(env | command grep -i '.utf') ; do
1647 eval export "$(echo $ENV | sed 's/UTF-8/iso885915/ ; s/utf8/iso885915/')"
1652 # make sure it is not assigned yet
1653 [[ -n ${aliases[iso2utf]} ]] && unalias iso2utf
1655 if ! isutfenv ; then
1656 for ENV in $(env | command grep -i '\.iso') ; do
1657 eval export "$(echo $ENV | sed 's/iso.*/UTF-8/ ; s/ISO.*/UTF-8/')"
1662 # especially for roadwarriors using GNU screen and ssh:
1663 if ! check_com asc &>/dev/null ; then
1664 asc() { autossh -t "$@" 'screen -RdU' }
1668 #f1# Hints for the use of zsh on grml
1670 print "$bg[white]$fg[black]
1671 zsh-help - hints for use of zsh on grml
1672 =======================================$reset_color"
1675 Main configuration of zsh happens in /etc/zsh/zshrc.
1676 That file is part of the package grml-etc-core, if you want to
1677 use them on a non-grml-system just get the tar.gz from
1678 http://deb.grml.org/ or (preferably) get it from the git repository:
1680 http://git.grml.org/f/grml-etc-core/etc/zsh/zshrc
1682 This version of grml'\''s zsh setup does not use skel/.zshrc anymore.
1683 The file is still there, but it is empty for backwards compatibility.
1685 For your own changes use these two files:
1689 The former is sourced very early in our zshrc, the latter is sourced
1692 System wide configuration without touching configuration files of grml
1693 can take place in /etc/zsh/zshrc.local.
1695 For information regarding zsh start at http://grml.org/zsh/
1697 Take a look at grml'\''s zsh refcard:
1698 % xpdf =(zcat /usr/share/doc/grml-docs/zsh/grml-zsh-refcard.pdf.gz)
1700 Check out the main zsh refcard:
1701 % '$BROWSER' http://www.bash2zsh.com/zsh_refcard/refcard.pdf
1703 And of course visit the zsh-lovers:
1706 You can adjust some options through environment variables when
1707 invoking zsh without having to edit configuration files.
1708 Basically meant for bash users who are not used to the power of
1711 "NOCOR=1 zsh" => deactivate automatic correction
1712 "NOMENU=1 zsh" => do not use auto menu completion
1713 (note: use ctrl-d for completion instead!)
1714 "NOPRECMD=1 zsh" => disable the precmd + preexec commands (set GNU screen title)
1715 "NOTITLE=1 zsh" => disable setting the title of xterms without disabling
1716 preexec() and precmd() completely
1717 "BATTERY=1 zsh" => activate battery status (via acpi) on right side of prompt
1718 "COMMAND_NOT_FOUND=1 zsh"
1719 => Enable a handler if an external command was not found
1720 The command called in the handler can be altered by setting
1721 the GRML_ZSH_CNF_HANDLER variable, the default is:
1722 "/usr/share/command-not-found/command-not-found"
1724 A value greater than 0 is enables a feature; a value equal to zero
1725 disables it. If you like one or the other of these settings, you can
1726 add them to ~/.zshrc.pre to ensure they are set when sourcing grml'\''s
1730 $bg[white]$fg[black]
1731 Please report wishes + bugs to the grml-team: http://grml.org/bugs/
1732 Enjoy your grml system with the zsh!$reset_color"
1736 if [[ -r /etc/debian_version ]] ; then
1737 #a3# Execute \kbd{apt-cache search}
1738 alias acs='apt-cache search'
1739 #a3# Execute \kbd{apt-cache show}
1740 alias acsh='apt-cache show'
1741 #a3# Execute \kbd{apt-cache policy}
1742 alias acp='apt-cache policy'
1743 #a3# Execute \kbd{apt-get dist-upgrade}
1744 salias adg="apt-get dist-upgrade"
1745 #a3# Execute \kbd{apt-get install}
1746 salias agi="apt-get install"
1747 #a3# Execute \kbd{aptitude install}
1748 salias ati="aptitude install"
1749 #a3# Execute \kbd{apt-get upgrade}
1750 salias ag="apt-get upgrade"
1751 #a3# Execute \kbd{apt-get update}
1752 salias au="apt-get update"
1753 #a3# Execute \kbd{aptitude update ; aptitude safe-upgrade}
1754 salias -a up="aptitude update ; aptitude safe-upgrade"
1755 #a3# Execute \kbd{dpkg-buildpackage}
1756 alias dbp='dpkg-buildpackage'
1757 #a3# Execute \kbd{grep-excuses}
1758 alias ge='grep-excuses'
1760 # get a root shell as normal user in live-cd mode:
1761 if isgrmlcd && [[ $UID -ne 0 ]] ; then
1765 #a1# Take a look at the syslog: \kbd{\$PAGER /var/log/syslog}
1766 salias llog="$PAGER /var/log/syslog" # take a look at the syslog
1767 #a1# Take a look at the syslog: \kbd{tail -f /var/log/syslog}
1768 salias tlog="tail -f /var/log/syslog" # follow the syslog
1771 # sort installed Debian-packages by size
1772 if check_com -c dpkg-query ; then
1773 #a3# List installed Debian-packages sorted by size
1774 alias debs-by-size="dpkg-query -Wf 'x \${Installed-Size} \${Package} \${Status}\n' | sed -ne '/^x /d' -e '/^x \(.*\) install ok installed$/s//\1/p' | sort -nr"
1777 # if cdrecord is a symlink (to wodim) or isn't present at all warn:
1778 if [[ -L /usr/bin/cdrecord ]] || ! check_com -c cdrecord; then
1779 if check_com -c wodim; then
1782 cdrecord is not provided under its original name by Debian anymore.
1783 See #377109 in the BTS of Debian for more details.
1785 Please use the wodim binary instead
1792 # Use hard limits, except for a smaller stack and no core dumps
1794 is425 && limit stack 8192
1795 isgrmlcd && limit core 0 # important for a live-cd-system
1800 # called later (via is4 && grmlcomp)
1801 # note: use 'zstyle' for getting current settings
1802 # press ^xh (control-x h) for getting tags in context; ^x? (control-x ?) to run complete_debug with trace output
1804 # TODO: This could use some additional information
1806 # allow one error for every three characters typed in approximate completer
1807 zstyle ':completion:*:approximate:' max-errors 'reply=( $((($#PREFIX+$#SUFFIX)/3 )) numeric )'
1809 # don't complete backup files as executables
1810 zstyle ':completion:*:complete:-command-::commands' ignored-patterns '(aptitude-*|*\~)'
1812 # start menu completion only if it could find no unambiguous initial string
1813 zstyle ':completion:*:correct:*' insert-unambiguous true
1814 zstyle ':completion:*:corrections' format $'%{\e[0;31m%}%d (errors: %e)%{\e[0m%}'
1815 zstyle ':completion:*:correct:*' original true
1817 # activate color-completion
1818 zstyle ':completion:*:default' list-colors ${(s.:.)LS_COLORS}
1820 # format on completion
1821 zstyle ':completion:*:descriptions' format $'%{\e[0;31m%}completing %B%d%b%{\e[0m%}'
1823 # automatically complete 'cd -<tab>' and 'cd -<ctrl-d>' with menu
1824 # zstyle ':completion:*:*:cd:*:directory-stack' menu yes select
1826 # insert all expansions for expand completer
1827 zstyle ':completion:*:expand:*' tag-order all-expansions
1828 zstyle ':completion:*:history-words' list false
1831 zstyle ':completion:*:history-words' menu yes
1833 # ignore duplicate entries
1834 zstyle ':completion:*:history-words' remove-all-dups yes
1835 zstyle ':completion:*:history-words' stop yes
1837 # match uppercase from lowercase
1838 zstyle ':completion:*' matcher-list 'm:{a-z}={A-Z}'
1840 # separate matches into groups
1841 zstyle ':completion:*:matches' group 'yes'
1842 zstyle ':completion:*' group-name ''
1844 if [[ "$NOMENU" -eq 0 ]] ; then
1845 # if there are more than 5 options allow selecting from a menu
1846 zstyle ':completion:*' menu select=5
1848 # don't use any menus at all
1852 zstyle ':completion:*:messages' format '%d'
1853 zstyle ':completion:*:options' auto-description '%d'
1855 # describe options in full
1856 zstyle ':completion:*:options' description 'yes'
1858 # on processes completion complete all user processes
1859 zstyle ':completion:*:processes' command 'ps -au$USER'
1861 # offer indexes before parameters in subscripts
1862 zstyle ':completion:*:*:-subscript-:*' tag-order indexes parameters
1864 # provide verbose completion information
1865 zstyle ':completion:*' verbose true
1867 # recent (as of Dec 2007) zsh versions are able to provide descriptions
1868 # for commands (read: 1st word in the line) that it will list for the user
1869 # to choose from. The following disables that, because it's not exactly fast.
1870 zstyle ':completion:*:-command-:*:' verbose false
1872 # set format for warnings
1873 zstyle ':completion:*:warnings' format $'%{\e[0;31m%}No matches for:%{\e[0m%} %d'
1875 # define files to ignore for zcompile
1876 zstyle ':completion:*:*:zcompile:*' ignored-patterns '(*~|*.zwc)'
1877 zstyle ':completion:correct:' prompt 'correct to: %e'
1879 # Ignore completion functions for commands you don't have:
1880 zstyle ':completion::(^approximate*):*:functions' ignored-patterns '_*'
1882 # Provide more processes in completion of programs like killall:
1883 zstyle ':completion:*:processes-names' command 'ps c -u ${USER} -o command | uniq'
1885 # complete manual by their section
1886 zstyle ':completion:*:manuals' separate-sections true
1887 zstyle ':completion:*:manuals.*' insert-sections true
1888 zstyle ':completion:*:man:*' menu yes select
1890 # Search path for sudo completion
1891 zstyle ':completion:*:sudo:*' command-path /usr/local/sbin \
1899 # provide .. as a completion
1900 zstyle ':completion:*' special-dirs ..
1902 # run rehash on completion so new installed program are found automatically:
1904 (( CURRENT == 1 )) && rehash
1909 # some people don't like the automatic correction - so run 'NOCOR=1 zsh' to deactivate it
1910 if [[ "$NOCOR" -gt 0 ]] ; then
1911 zstyle ':completion:*' completer _oldlist _expand _force_rehash _complete _files _ignored
1914 # try to be smart about when to use what completer...
1916 zstyle -e ':completion:*' completer '
1917 if [[ $_last_try != "$HISTNO$BUFFER$CURSOR" ]] ; then
1918 _last_try="$HISTNO$BUFFER$CURSOR"
1919 reply=(_complete _match _ignored _prefix _files)
1921 if [[ $words[1] == (rm|mv) ]] ; then
1922 reply=(_complete _files)
1924 reply=(_oldlist _expand _force_rehash _complete _ignored _correct _approximate _files)
1929 # command for process lists, the local web server details and host completion
1930 zstyle ':completion:*:urls' local 'www' '/var/www/' 'public_html'
1933 [[ -d $ZSHDIR/cache ]] && zstyle ':completion:*' use-cache yes && \
1934 zstyle ':completion::complete:*' cache-path $ZSHDIR/cache/
1938 [[ -r ~/.ssh/known_hosts ]] && _ssh_hosts=(${${${${(f)"$(<$HOME/.ssh/known_hosts)"}:#[\|]*}%%\ *}%%,*}) || _ssh_hosts=()
1939 [[ -r /etc/hosts ]] && : ${(A)_etc_hosts:=${(s: :)${(ps:\t:)${${(f)~~"$(</etc/hosts)"}%%\#*}##[:blank:]#[^[:blank:]]#}}} || _etc_hosts=()
1950 zstyle ':completion:*:hosts' hosts $hosts
1951 # TODO: so, why is this here?
1952 # zstyle '*' hosts $hosts
1954 # use generic completion system for programs not yet defined; (_gnu_generic works
1955 # with commands that provide a --help option with "standard" gnu-like output.)
1956 for compcom in cp deborphan df feh fetchipac head hnb ipacsum mv \
1957 pal stow tail uname ; do
1958 [[ -z ${_comps[$compcom]} ]] && compdef _gnu_generic ${compcom}
1961 # see upgrade function in this file
1962 compdef _hosts upgrade
1967 # people should use 'grml-x'!
1968 if check_com -c 915resolution; then
1970 echo "Please use 915resolution as resolution modifying tool for Intel \
1976 #a1# Output version of running grml
1977 alias grml-version='cat /etc/grml_version'
1979 if check_com -c rebuildfstab ; then
1980 #a1# Rebuild /etc/fstab
1981 alias grml-rebuildfstab='rebuildfstab -v -r -config'
1984 if check_com -c grml-debootstrap ; then
1986 echo "Installing debian to harddisk is possible by using grml-debootstrap."
1992 # now run the functions
1994 is4 && isgrml && grmlstuff
1998 is4 && xsource "/etc/zsh/keephack"
2000 # wonderful idea of using "e" glob qualifier by Peter Stephenson
2001 # You use it as follows:
2002 # $ NTREF=/reference/file
2004 # This lists all the files in the current directory newer than the reference file.
2005 # You can also specify the reference file inline; note quotes:
2006 # $ ls -l *(e:'nt ~/.zshenv':)
2008 if [[ -n $1 ]] ; then
2011 [[ $REPLY -nt $NTREF ]]
2016 #f1# Reload an autoloadable function
2017 freload() { while (( $# )); do; unfunction $1; autoload -U $1; shift; done }
2018 compdef _functions freload
2020 #f1# List symlinks in detail (more detailed version of 'readlink -f' and 'whence -s')
2022 [[ -z "$1" ]] && printf 'Usage: %s <file(s)>\n' "$0" && return 1
2023 for file in "$@" ; do
2024 while [[ -h "$file" ]] ; do
2026 file=$(readlink "$file")
2031 # TODO: Is it supported to use pager settings like this?
2032 # PAGER='less -Mr' - If so, the use of $PAGER here needs fixing
2033 # with respect to wordsplitting. (ie. ${=PAGER})
2034 if check_com -c $PAGER ; then
2035 #f1# View Debian's changelog of a given package
2038 if [[ -r /usr/share/doc/$1/changelog.Debian.gz ]] ; then
2039 $PAGER /usr/share/doc/$1/changelog.Debian.gz
2040 elif [[ -r /usr/share/doc/$1/changelog.gz ]] ; then
2041 $PAGER /usr/share/doc/$1/changelog.gz
2043 if check_com -c aptitude ; then
2044 echo "No changelog for package $1 found, using aptitude to retrieve it."
2046 aptitude -t unstable changelog $1
2048 aptitude changelog $1
2051 echo "No changelog for package $1 found, sorry."
2056 _dchange() { _files -W /usr/share/doc -/ }
2057 compdef _dchange dchange
2059 #f1# View Debian's NEWS of a given package
2062 if [[ -r /usr/share/doc/$1/NEWS.Debian.gz ]] ; then
2063 $PAGER /usr/share/doc/$1/NEWS.Debian.gz
2065 if [[ -r /usr/share/doc/$1/NEWS.gz ]] ; then
2066 $PAGER /usr/share/doc/$1/NEWS.gz
2068 echo "No NEWS file for package $1 found, sorry."
2073 _dnews() { _files -W /usr/share/doc -/ }
2074 compdef _dnews dnews
2076 #f1# View Debian's copyright of a given package
2079 if [[ -r /usr/share/doc/$1/copyright ]] ; then
2080 $PAGER /usr/share/doc/$1/copyright
2082 echo "No copyright file for package $1 found, sorry."
2086 _dcopyright() { _files -W /usr/share/doc -/ }
2087 compdef _dcopyright dcopyright
2089 #f1# View upstream's changelog of a given package
2092 if [[ -r /usr/share/doc/$1/changelog.gz ]] ; then
2093 $PAGER /usr/share/doc/$1/changelog.gz
2095 echo "No changelog for package $1 found, sorry."
2099 _uchange() { _files -W /usr/share/doc -/ }
2100 compdef _uchange uchange
2105 ZSH_PROFILE_RC=1 $SHELL "$@"
2108 #f1# Edit an alias via zle
2110 [[ -z "$1" ]] && { echo "Usage: edalias <alias_to_edit>" ; return 1 } || vared aliases'[$1]' ;
2112 compdef _aliases edalias
2114 #f1# Edit a function via zle
2116 [[ -z "$1" ]] && { echo "Usage: edfunc <function_to_edit>" ; return 1 } || zed -f "$1" ;
2118 compdef _functions edfunc
2120 # use it e.g. via 'Restart apache2'
2121 #m# f6 Start() \kbd{/etc/init.d/\em{process}}\quad\kbd{start}
2122 #m# f6 Restart() \kbd{/etc/init.d/\em{process}}\quad\kbd{restart}
2123 #m# f6 Stop() \kbd{/etc/init.d/\em{process}}\quad\kbd{stop}
2124 #m# f6 Reload() \kbd{/etc/init.d/\em{process}}\quad\kbd{reload}
2125 #m# f6 Force-Reload() \kbd{/etc/init.d/\em{process}}\quad\kbd{force-reload}
2126 #m# f6 Status() \kbd{/etc/init.d/\em{process}}\quad\kbd{status}
2127 if [[ -d /etc/init.d || -d /etc/service ]] ; then
2129 local action_="${1:l}" # e.g Start/Stop/Restart
2133 local service_target_="$(readlink /etc/init.d/$service_)"
2134 if [[ $service_target_ == "/usr/bin/sv" ]]; then
2136 case "${action_}" in
2137 start) if [[ ! -e /etc/service/$service_ ]]; then
2138 $SUDO ln -s "/etc/sv/$service_" "/etc/service/"
2140 $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
2142 # there is no reload in runits sysv emulation
2143 reload) $SUDO "/etc/init.d/$service_" "force-reload" "$param_" ;;
2144 *) $SUDO "/etc/init.d/$service_" "${action_}" "$param_" ;;
2148 $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
2154 scripts=( /etc/init.d/*(x:t) )
2155 _describe "service startup script" scripts
2158 for i in Start Restart Stop Force-Reload Reload Status ; do
2159 eval "$i() { __start_stop $i \"\$1\" \"\$2\" ; }"
2160 compdef _grmlinitd $i
2164 #f1# Provides useful information on globbing
2171 p named pipes (FIFOs)
2172 * executable plain files (0100)
2173 % device files (character or block special)
2174 %b block special files
2175 %c character special files
2176 r owner-readable files (0400)
2177 w owner-writable files (0200)
2178 x owner-executable files (0100)
2179 A group-readable files (0040)
2180 I group-writable files (0020)
2181 E group-executable files (0010)
2182 R world-readable files (0004)
2183 W world-writable files (0002)
2184 X world-executable files (0001)
2185 s setuid files (04000)
2186 S setgid files (02000)
2187 t files with the sticky bit (01000)
2189 print *(m-1) # Files modified up to a day ago
2190 print *(a1) # Files accessed a day ago
2191 print *(@) # Just symlinks
2192 print *(Lk+50) # Files bigger than 50 kilobytes
2193 print *(Lk-50) # Files smaller than 50 kilobytes
2194 print **/*.c # All *.c files recursively starting in \$PWD
2195 print **/*.c~file.c # Same as above, but excluding 'file.c'
2196 print (foo|bar).* # Files starting with 'foo' or 'bar'
2197 print *~*.* # All Files that do not contain a dot
2198 chmod 644 *(.^x) # make all plain non-executable files publically readable
2199 print -l *(.c|.h) # Lists *.c and *.h
2200 print **/*(g:users:) # Recursively match all files that are owned by group 'users'
2201 echo /proc/*/cwd(:h:t:s/self//) # Analogous to >ps ax | awk '{print $1}'<"
2203 alias help-zshglob=H-Glob
2205 #v1# set number of lines to display per page
2206 HELP_LINES_PER_PAGE=20
2207 #v1# set location of help-zle cache file
2208 HELP_ZLE_CACHE_FILE=~/.cache/zsh_help_zle_lines.zsh
2209 #f1# helper function for help-zle, actually generates the help text
2210 help_zle_parse_keybindings()
2214 unsetopt ksharrays #indexing starts at 1
2216 #v1# choose files that help-zle will parse for keybindings
2217 ((${+HELPZLE_KEYBINDING_FILES})) || HELPZLE_KEYBINDING_FILES=( /etc/zsh/zshrc ~/.zshrc.pre ~/.zshrc ~/.zshrc.local )
2219 if [[ -r $HELP_ZLE_CACHE_FILE ]]; then
2221 for f ($HELPZLE_KEYBINDING_FILES) [[ $f -nt $HELP_ZLE_CACHE_FILE ]] && load_cache=1
2222 [[ $load_cache -eq 0 ]] && . $HELP_ZLE_CACHE_FILE && return
2225 #fill with default keybindings, possibly to be overwriten in a file later
2226 #Note that due to zsh inconsistency on escaping assoc array keys, we encase the key in '' which we will remove later
2227 local -A help_zle_keybindings
2228 help_zle_keybindings['<Ctrl>@']="set MARK"
2229 help_zle_keybindings['<Ctrl>x<Ctrl>j']="vi-join lines"
2230 help_zle_keybindings['<Ctrl>x<Ctrl>b']="jump to matching brace"
2231 help_zle_keybindings['<Ctrl>x<Ctrl>u']="undo"
2232 help_zle_keybindings['<Ctrl>_']="undo"
2233 help_zle_keybindings['<Ctrl>x<Ctrl>f<c>']="find <c> in cmdline"
2234 help_zle_keybindings['<Ctrl>a']="goto beginning of line"
2235 help_zle_keybindings['<Ctrl>e']="goto end of line"
2236 help_zle_keybindings['<Ctrl>t']="transpose charaters"
2237 help_zle_keybindings['<Alt>t']="transpose words"
2238 help_zle_keybindings['<Alt>s']="spellcheck word"
2239 help_zle_keybindings['<Ctrl>k']="backward kill buffer"
2240 help_zle_keybindings['<Ctrl>u']="forward kill buffer"
2241 help_zle_keybindings['<Ctrl>y']="insert previously killed word/string"
2242 help_zle_keybindings["<Alt>'"]="quote line"
2243 help_zle_keybindings['<Alt>"']="quote from mark to cursor"
2244 help_zle_keybindings['<Alt><arg>']="repeat next cmd/char <arg> times (<Alt>-<Alt>1<Alt>0a -> -10 times 'a')"
2245 help_zle_keybindings['<Alt>u']="make next word Uppercase"
2246 help_zle_keybindings['<Alt>l']="make next word lowercase"
2247 help_zle_keybindings['<Ctrl>xd']="preview expansion under cursor"
2248 help_zle_keybindings['<Alt>q']="push current CL into background, freeing it. Restore on next CL"
2249 help_zle_keybindings['<Alt>.']="insert (and interate through) last word from prev CLs"
2250 help_zle_keybindings['<Alt>,']="complete word from newer history (consecutive hits)"
2251 help_zle_keybindings['<Alt>m']="repeat last typed word on current CL"
2252 help_zle_keybindings['<Ctrl>v']="insert next keypress symbol literally (e.g. for bindkey)"
2253 help_zle_keybindings['!!:n*<Tab>']="insert last n arguments of last command"
2254 help_zle_keybindings['!!:n-<Tab>']="insert arguments n..N-2 of last command (e.g. mv s s d)"
2255 help_zle_keybindings['<Alt>h']="show help/manpage for current command"
2257 #init global variables
2258 unset help_zle_lines help_zle_sln
2259 typeset -g -a help_zle_lines
2260 typeset -g help_zle_sln=1
2263 local lastkeybind_desc contents #last description starting with #k# that we found
2264 local num_lines_elapsed=0 #number of lines between last description and keybinding
2265 #search config files in the order they a called (and thus the order in which they overwrite keybindings)
2266 for f in $HELPZLE_KEYBINDING_FILES; do
2267 [[ -r "$f" ]] || continue #not readable ? skip it
2269 for cline in "${(f)contents}"; do
2270 #zsh pattern: matches lines like: #k# ..............
2271 if [[ "$cline" == (#s)[[:space:]]#\#k\#[[:space:]]##(#b)(*)[[:space:]]#(#e) ]]; then
2272 lastkeybind_desc="$match[*]"
2274 #zsh pattern: matches lines that set a keybinding using bindkey or compdef -k
2275 # ignores lines that are commentend out
2276 # grabs first in '' or "" enclosed string with length between 1 and 6 characters
2277 elif [[ "$cline" == [^#]#(bindkey|compdef -k)[[:space:]](*)(#b)(\"((?)(#c1,6))\"|\'((?)(#c1,6))\')(#B)(*) ]]; then
2278 #description prevously found ? description not more than 2 lines away ? keybinding not empty ?
2279 if [[ -n $lastkeybind_desc && $num_lines_elapsed -lt 2 && -n $match[1] ]]; then
2280 #substitute keybinding string with something readable
2281 k=${${${${${${${match[1]/\\e\^h/<Alt><BS>}/\\e\^\?/<Alt><BS>}/\\e\[5~/<PageUp>}/\\e\[6~/<PageDown>}//(\\e|\^\[)/<Alt>}//\^/<Ctrl>}/3~/<Alt><Del>}
2282 #put keybinding in assoc array, possibly overwriting defaults or stuff found in earlier files
2283 #Note that we are extracting the keybinding-string including the quotes (see Note at beginning)
2284 help_zle_keybindings[${k}]=$lastkeybind_desc
2288 ((num_lines_elapsed++))
2293 #calculate length of keybinding column
2295 for k (${(k)help_zle_keybindings[@]}) ((kstrlen < ${#k})) && kstrlen=${#k}
2296 #convert the assoc array into preformated lines, which we are able to sort
2297 for k v in ${(kv)help_zle_keybindings[@]}; do
2298 #pad keybinding-string to kstrlen chars and remove outermost characters (i.e. the quotes)
2299 help_zle_lines+=("${(r:kstrlen:)k[2,-2]}${v}")
2301 #sort lines alphabetically
2302 help_zle_lines=("${(i)help_zle_lines[@]}")
2303 [[ -d ${HELP_ZLE_CACHE_FILE:h} ]] || mkdir -p "${HELP_ZLE_CACHE_FILE:h}"
2304 echo "help_zle_lines=(${(q)help_zle_lines[@]})" >| $HELP_ZLE_CACHE_FILE
2305 zcompile $HELP_ZLE_CACHE_FILE
2307 typeset -g help_zle_sln
2308 typeset -g -a help_zle_lines
2310 #f1# Provides (partially autogenerated) help on keybindings and the zsh line editor
2314 unsetopt ksharrays #indexing starts at 1
2315 #help lines already generated ? no ? then do it
2316 [[ ${+functions[help_zle_parse_keybindings]} -eq 1 ]] && {help_zle_parse_keybindings && unfunction help_zle_parse_keybindings}
2317 #already displayed all lines ? go back to the start
2318 [[ $help_zle_sln -gt ${#help_zle_lines} ]] && help_zle_sln=1
2319 local sln=$help_zle_sln
2320 #note that help_zle_sln is a global var, meaning we remember the last page we viewed
2321 help_zle_sln=$((help_zle_sln + HELP_LINES_PER_PAGE))
2322 zle -M "${(F)help_zle_lines[sln,help_zle_sln-1]}"
2324 #k# display help for keybindings and ZLE (cycle pages with consecutive use)
2325 zle -N help-zle && bindkey '^xz' help-zle
2327 # grep for running process, like: 'any vim'
2331 if [[ -z "$1" ]] ; then
2332 echo "any - grep for process(es) by keyword" >&2
2333 echo "Usage: any <keyword>" >&2 ; return 1
2335 ps xauwww | grep -i "${grep_options[@]}" "[${1[1]}]${1[2,-1]}"
2340 # After resuming from suspend, system is paging heavily, leading to very bad interactivity.
2341 # taken from $LINUX-KERNELSOURCE/Documentation/power/swsusp.txt
2342 [[ -r /proc/1/maps ]] && \
2344 print 'Reading /proc/[0-9]*/maps and sending output to /dev/null, this might take a while.'
2345 cat $(sed -ne 's:.* /:/:p' /proc/[0-9]*/maps | sort -u | grep -v '^/dev/') > /dev/null
2346 print 'Finished, running "swapoff -a; swapon -a" may also be useful.'
2349 # a wrapper for vim, that deals with title setting
2351 # set this array to a set of options to vim you always want
2352 # to have set when calling vim (in .zshrc.local), like:
2353 # VIM_OPTIONS=( -p )
2354 # This will cause vim to send every file given on the
2355 # commandline to be send to it's own tab (needs vim7).
2356 if check_com vim; then
2358 VIM_PLEASE_SET_TITLE='yes' command vim ${VIM_OPTIONS} "$@"
2362 # make a backup of a file
2364 cp -a "$1" "${1}_$(date --iso-8601=seconds)"
2367 ssl_hashes=( sha512 sha256 sha1 md5 )
2369 for sh in ${ssl_hashes}; do
2370 eval 'ssl-cert-'${sh}'() {
2372 if [[ -z $1 ]] ; then
2373 printf '\''usage: %s <file>\n'\'' "ssh-cert-'${sh}'"
2376 openssl x509 -noout -fingerprint -'${sh}' -in $1
2380 ssl-cert-fingerprints() {
2383 if [[ -z $1 ]] ; then
2384 printf 'usage: ssl-cert-fingerprints <file>\n'
2387 for i in ${ssl_hashes}
2394 if [[ -z $1 ]] ; then
2395 printf 'usage: ssl-cert-info <file>\n'
2398 openssl x509 -noout -text -in $1
2399 ssl-cert-fingerprints $1
2402 # make sure our environment is clean regarding colors
2403 for color in BLUE RED GREEN CYAN YELLOW MAGENTA WHITE ; unset $color
2405 # "persistent history"
2406 # just write important commands you always need to ~/.important_commands
2407 if [[ -r ~/.important_commands ]] ; then
2408 fc -R ~/.important_commands
2411 # load the lookup subsystem if it's available on the system
2412 zrcautoload lookupinit && lookupinit
2416 # set terminal property (used e.g. by msgid-chooser)
2417 export COLORTERM="yes"
2422 #a2# Execute \kbd{du -sch}
2424 #a2# Execute \kbd{jobs -l}
2428 #a2# Execute \kbd{ls -lSrah}
2429 alias dir="ls -lSrah"
2430 #a2# Only show dot-directories
2431 alias lad='ls -d .*(/)'
2432 #a2# Only show dot-files
2433 alias lsa='ls -a .*(.)'
2434 #a2# Only files with setgid/setuid/sticky flag
2435 alias lss='ls -l *(s,S,t)'
2436 #a2# Only show symlinks
2437 alias lsl='ls -l *(@)'
2438 #a2# Display only executables
2439 alias lsx='ls -l *(*)'
2440 #a2# Display world-{readable,writable,executable} files
2441 alias lsw='ls -ld *(R,W,X.^ND/)'
2442 #a2# Display the ten biggest files
2443 alias lsbig="ls -flh *(.OL[1,10])"
2444 #a2# Only show directories
2445 alias lsd='ls -d *(/)'
2446 #a2# Only show empty directories
2447 alias lse='ls -d *(/^F)'
2448 #a2# Display the ten newest files
2449 alias lsnew="ls -rtlh *(D.om[1,10])"
2450 #a2# Display the ten oldest files
2451 alias lsold="ls -rtlh *(D.Om[1,10])"
2452 #a2# Display the ten smallest files
2453 alias lssmall="ls -Srl *(.oL[1,10])"
2454 #a2# Display the ten newest directories and ten newest .directories
2455 alias lsnewdir="ls -rthdl *(/om[1,10]) .*(D/om[1,10])"
2456 #a2# Display the ten oldest directories and ten oldest .directories
2457 alias lsolddir="ls -rthdl *(/Om[1,10]) .*(D/Om[1,10])"
2459 # some useful aliases
2460 #a2# Remove current empty directory. Execute \kbd{cd ..; rmdir $OLDCWD}
2461 alias rmcdir='cd ..; rmdir $OLDPWD || cd $OLDPWD'
2463 #a2# ssh with StrictHostKeyChecking=no \\&\quad and UserKnownHostsFile unset
2464 alias insecssh='ssh -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
2465 alias insecscp='scp -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
2467 # work around non utf8 capable software in utf environment via $LANG and luit
2468 if check_com isutfenv && check_com luit ; then
2469 if check_com -c mrxvt ; then
2470 isutfenv && [[ -n "$LANG" ]] && \
2471 alias mrxvt="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit mrxvt"
2474 if check_com -c aterm ; then
2475 isutfenv && [[ -n "$LANG" ]] && \
2476 alias aterm="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit aterm"
2479 if check_com -c centericq ; then
2480 isutfenv && [[ -n "$LANG" ]] && \
2481 alias centericq="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit centericq"
2487 #f5# Backup \kbd{file {\rm to} file\_timestamp}
2490 cp -b $1 $1_`date --iso-8601=m`
2493 #f5# cd to directoy and list files
2499 # smart cd function, allows switching to /etc when running 'cd /etc/fstab'
2501 if (( ${#argv} == 1 )) && [[ -f ${1} ]]; then
2502 [[ ! -e ${1:h} ]] && return 1
2503 print "Correcting ${1} to ${1:h}"
2510 #f5# Create Directoy and \kbd{cd} to it
2512 if (( ARGC != 1 )); then
2513 printf 'usage: mkcd <new-directory>\n'
2516 if [[ ! -d "$1" ]]; then
2517 command mkdir -p "$1"
2519 printf '`%s'\'' already exists: cd-ing.\n' "$1"
2524 #f5# Create temporary directory and \kbd{cd} to it
2532 #f5# Create directory under cursor or the selected area
2533 # Press ctrl-xM to create the directory under the cursor or the selected area.
2534 # To select an area press ctrl-@ or ctrl-space and use the cursor.
2535 # Use case: you type "mv abc ~/testa/testb/testc/" and remember that the
2536 # directory does not exist yet -> press ctrl-XM and problem solved
2539 if ((REGION_ACTIVE==1)); then
2540 local F=$MARK T=$CURSOR
2541 if [[ $F -gt $T ]]; then
2545 # get marked area from buffer and eliminate whitespace
2546 PATHTOMKDIR=${BUFFER[F+1,T]%%[[:space:]]##}
2547 PATHTOMKDIR=${PATHTOMKDIR##[[:space:]]##}
2549 local bufwords iword
2550 bufwords=(${(z)LBUFFER})
2552 bufwords=(${(z)BUFFER})
2553 PATHTOMKDIR="${(Q)bufwords[iword]}"
2555 [[ -z "${PATHTOMKDIR}" ]] && return 1
2556 PATHTOMKDIR=${~PATHTOMKDIR}
2557 if [[ -e "${PATHTOMKDIR}" ]]; then
2558 zle -M " path already exists, doing nothing"
2560 zle -M "$(mkdir -p -v "${PATHTOMKDIR}")"
2564 #k# mkdir -p <dir> from string under cursor or marked area
2565 zle -N inplaceMkDirs && bindkey '^xM' inplaceMkDirs
2567 #f5# List files which have been accessed within the last {\it n} days, {\it n} defaults to 1
2570 print -l -- *(a-${1:-1})
2573 #f5# List files which have been changed within the last {\it n} days, {\it n} defaults to 1
2576 print -l -- *(c-${1:-1})
2579 #f5# List files which have been modified within the last {\it n} days, {\it n} defaults to 1
2582 print -l -- *(m-${1:-1})
2584 # modified() was named new() in earlier versions, add an alias for backwards compatibility
2585 check_com new || alias new=modified
2587 # use colors when GNU grep with color-support
2588 #a2# Execute \kbd{grep -{}-color=auto}
2589 (( $#grep_options > 0 )) && alias grep='grep '${grep_options:+"${grep_options[*]}"}
2592 # 'translate' looks up fot a word in a file with language-to-language
2593 # translations (field separator should be " : "). A typical wordlist looks
2595 # | english-word : german-transmission
2596 # It's also only possible to translate english to german but not reciprocal.
2597 # Use the following oneliner to turn back the sort order:
2598 # $ awk -F ':' '{ print $2" : "$1" "$3 }' \
2599 # /usr/local/lib/words/en-de.ISO-8859-1.vok > ~/.translate/de-en.ISO-8859-1.vok
2600 #f5# Translates a word
2605 translate -l de-en $2
2608 translate -l en-de $2
2611 echo "Usage: $0 { -D | -E }"
2612 echo " -D == German to English"
2613 echo " -E == English to German"
2617 # Usage: simple-extract <file>
2618 # Using option -d deletes the original archive file.
2619 #f5# Smart archive extractor
2622 setopt extended_glob noclobber
2623 local DELETE_ORIGINAL DECOMP_CMD USES_STDIN USES_STDOUT GZTARGET WGET_CMD
2625 zparseopts -D -E "d=DELETE_ORIGINAL"
2626 for ARCHIVE in "${@}"; do
2628 *(tar.bz2|tbz2|tbz))
2629 DECOMP_CMD="tar -xvjf -"
2634 DECOMP_CMD="tar -xvzf -"
2638 *(tar.xz|txz|tar.lzma))
2639 DECOMP_CMD="tar -xvJf -"
2644 DECOMP_CMD="tar -xvf -"
2649 DECOMP_CMD="unrar x"
2674 DECOMP_CMD="bzip2 -d -c -"
2679 DECOMP_CMD="gzip -d -c -"
2684 DECOMP_CMD="xz -d -c -"
2689 print "ERROR: '$ARCHIVE' has unrecognized archive type." >&2
2695 if ! check_com ${DECOMP_CMD[(w)1]}; then
2696 echo "ERROR: ${DECOMP_CMD[(w)1]} not installed." >&2
2701 GZTARGET="${ARCHIVE:t:r}"
2702 if [[ -f $ARCHIVE ]] ; then
2704 print "Extracting '$ARCHIVE' ..."
2705 if $USES_STDIN; then
2706 if $USES_STDOUT; then
2707 ${=DECOMP_CMD} < "$ARCHIVE" > $GZTARGET
2709 ${=DECOMP_CMD} < "$ARCHIVE"
2712 if $USES_STDOUT; then
2713 ${=DECOMP_CMD} "$ARCHIVE" > $GZTARGET
2715 ${=DECOMP_CMD} "$ARCHIVE"
2718 [[ $? -eq 0 && -n "$DELETE_ORIGINAL" ]] && rm -f "$ARCHIVE"
2720 elif [[ "$ARCHIVE" == (#s)(https|http|ftp)://* ]] ; then
2721 if check_com curl; then
2722 WGET_CMD="curl -L -k -s -o -"
2723 elif check_com wget; then
2724 WGET_CMD="wget -q -O - --no-check-certificate"
2726 print "ERROR: neither wget nor curl is installed" >&2
2730 print "Downloading and Extracting '$ARCHIVE' ..."
2731 if $USES_STDIN; then
2732 if $USES_STDOUT; then
2733 ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD} > $GZTARGET
2736 ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD}
2740 if $USES_STDOUT; then
2741 ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE") > $GZTARGET
2743 ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE")
2748 print "ERROR: '$ARCHIVE' is neither a valid file nor a supported URI." >&2
2758 'files:Archives:_files -g "*.(#l)(tar.bz2|tbz2|tbz|tar.gz|tgz|tar.xz|txz|tar.lzma|tar|rar|lzh|7z|zip|jar|deb|bz2|gz|Z|xz|lzma)"' \
2759 '_urls:Remote Archives:_urls'
2765 '-d[delete original archivefile after extraction]' \
2766 '*:Archive Or Uri:__archive_or_uri'
2768 compdef _simple_extract simple-extract
2769 alias se=simple-extract
2771 #f5# Set all ulimit parameters to \kbd{unlimited}
2782 #f5# Change the xterm title from within GNU-screen
2785 if [[ $1 != "-f" ]] ; then
2786 if [[ -z ${DISPLAY} ]] ; then
2787 printf 'xtrename only makes sense in X11.\n'
2793 if [[ -z $1 ]] ; then
2794 printf 'usage: xtrename [-f] "title for xterm"\n'
2795 printf ' renames the title of xterm from _within_ screen.\n'
2796 printf ' also works without screen.\n'
2797 printf ' will not work if DISPLAY is unset, use -f to override.\n'
2800 print -n "\eP\e]0;${1}\C-G\e\\"
2804 # Create small urls via http://goo.gl using curl(1).
2805 # API reference: https://code.google.com/apis/urlshortener/
2808 setopt extended_glob
2810 if [[ -z $1 ]]; then
2811 print "USAGE: zurl <URL>"
2815 local PN url prog api json contenttype item
2820 # Prepend 'http://' to given URL where necessary for later output.
2821 if [[ ${url} != http(s|)://* ]]; then
2825 if check_com -c curl; then
2828 print "curl is not available, but mandatory for ${PN}. Aborting."
2831 api='https://www.googleapis.com/urlshortener/v1/url'
2832 contenttype="Content-Type: application/json"
2833 json="{\"longUrl\": \"${url}\"}"
2834 data=(${(f)"$($prog --silent -H ${contenttype} -d ${json} $api)"})
2835 # Parse the response
2836 for item in "${data[@]}"; do
2841 printf '%s\n' "$item"
2849 #f2# Find history events by search pattern and list them by date.
2852 local usage help ident format_l format_s first_char remain first last
2853 usage='USAGE: whatwhen [options] <searchstring> <search range>'
2854 help='Use `whatwhen -h'\'' for further explanations.'
2855 ident=${(l,${#${:-Usage: }},, ,)}
2856 format_l="${ident}%s\t\t\t%s\n"
2857 format_s="${format_l//(\\t)##/\\t}"
2858 # Make the first char of the word to search for case
2859 # insensitive; e.g. [aA]
2860 first_char=[${(L)1[1]}${(U)1[1]}]
2862 # Default search range is `-100'.
2864 # Optional, just used for `<first> <last>' given.
2868 printf '%s\n\n' 'ERROR: No search string specified. Aborting.'
2869 printf '%s\n%s\n\n' ${usage} ${help} && return 1
2872 printf '%s\n\n' ${usage}
2874 printf $format_l '-h' 'show help text'
2876 print 'SEARCH RANGE:'
2877 printf $format_l "'0'" 'the whole history,'
2878 printf $format_l '-<n>' 'offset to the current history number; (default: -100)'
2879 printf $format_s '<[-]first> [<last>]' 'just searching within a give range'
2880 printf '\n%s\n' 'EXAMPLES:'
2881 printf ${format_l/(\\t)/} 'whatwhen grml' '# Range is set to -100 by default.'
2882 printf $format_l 'whatwhen zsh -250'
2883 printf $format_l 'whatwhen foo 1 99'
2886 printf '%s\n%s\n\n' ${usage} ${help} && return 1
2889 # -l list results on stout rather than invoking $EDITOR.
2890 # -i Print dates as in YYYY-MM-DD.
2891 # -m Search for a - quoted - pattern within the history.
2892 fc -li -m "*${first_char}${remain}*" $first $last
2897 # mercurial related stuff
2898 if check_com -c hg ; then
2899 # gnu like diff for mercurial
2900 # http://www.selenic.com/mercurial/wiki/index.cgi/TipsAndTricks
2901 #f5# GNU like diff for mercurial
2904 for i in $(hg status -marn "$@") ; diff -ubwd <(hg cat "$i") "$i"
2907 # build debian package
2908 #a2# Alias for \kbd{hg-buildpackage}
2909 alias hbp='hg-buildpackage'
2911 # execute commands on the versioned patch-queue from the current repos
2912 alias mq='hg -R $(readlink -f $(hg root)/.hg/patches)'
2914 # diffstat for specific version of a mercurial repository
2915 # hgstat => display diffstat between last revision and tip
2916 # hgstat 1234 => display diffstat between revision 1234 and tip
2917 #f5# Diffstat for specific version of a mercurial repos
2920 [[ -n "$1" ]] && hg diff -r $1 -r tip | diffstat || hg export tip | diffstat
2923 fi # end of check whether we have the 'hg'-executable
2925 # grml-small cleanups
2927 # The following is used to remove zsh-config-items that do not work
2928 # in grml-small by default.
2929 # If you do not want these adjustments (for whatever reason), set
2930 # $GRMLSMALL_SPECIFIC to 0 in your .zshrc.pre file (which this configuration
2931 # sources if it is there).
2933 if (( GRMLSMALL_SPECIFIC > 0 )) && isgrmlsmall ; then
2936 unalias 'V' &> /dev/null
2937 unfunction vman &> /dev/null
2938 unfunction viless &> /dev/null
2939 unfunction 2html &> /dev/null
2941 # manpages are not in grmlsmall
2942 unfunction manzsh &> /dev/null
2943 unfunction man2 &> /dev/null
2949 ## genrefcard.pl settings
2951 ### doc strings for external functions from files
2952 #m# f5 grml-wallpaper() Sets a wallpaper (try completion for possible values)
2954 ### example: split functions-search 8,16,24,32
2955 #@# split functions-search 8
2957 ## END OF FILE #################################################################
2958 # vim:filetype=zsh foldmethod=marker autoindent expandtab shiftwidth=4