3 grml-router \- set up your box as NAT-router
6 .RI " start|stop|restart|info "
8 This manual page documents briefly the
12 grml-router reads the configuration file /etc/grml/routersetup and uses the
13 variable OUTDEV for setting the WAN device. If OUTDEV is set to auto, the
14 device with a default route entry is used.
16 You have to set up a DNS-server server, or use the DNS-server provided by your
19 On the client(s) you have to specify the gateway manually, also specify a
20 nameserver. You can run the following commands on the client:
22 route add default gw $IP_ADDRSS_OF_GW
23 echo "nameserver $IP_OF_NAMESERVER" >> /etc/resolv.conf
29 grml-router was written by Ulrich Dangel <schula@grml.org> and Michael Prokop <mika@grml.org>.
31 This manual page was written by Michael Prokop
32 <mika@grml.org> for the grml project (but may be used by others).