# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
# Bug-Reports: see http://grml.org/bugs/
# License: This file is licensed under the GPL v2.
-# Latest change: Fre Nov 10 00:37:44 CET 2006 [mika]
################################################################################
################################################################################
# Notice: you can configure grml-autoconfig via adjusting the following values.
-# Set them to 'yes' to activate them. But please notice that some options
-# require an additional bootparam ("cheatcode") anyway, some options just
-# de-/activate a check!
+# Set them to 'yes' to activate them and to 'no' to deactivate them.
+# But please notice that some options might require an additional bootparam
+# ("cheatcode") anyway, some options just de-/activate a check!
#
-# If you want to deactivate an option just set it to 'no'.
-#
# Take a look at the script 'grml-autoconfig' as well!
################################################################################
## These are the options you might want to adjust: #############################
-# configure language - set keyboard layout
-# notice: overwriting this variable is still possible through
-# bootparameter lang=...
-# See http://grml.org/faq/#language for more information.
-# default: us
-# LANGUAGE='de'
-
-# console font
-# default: Lat15-Terminus16
+# set console font, default: Lat15-Terminus16
# CONSOLEFONT='iso15graf-16'
-# display information on running kernel
-CONFIG_KERNEL='yes'
-
-# check for network devices and run dhclient
+# check for network devices and run pump for every present network device?
+# use script grml-network for interactive configuration and
+# /etc/network/interfaces for persistent configuration
+# default: yes
CONFIG_DHCP='yes'
-# check for frequency-scalable CPU and activate cpydyn/powernowd
+# check for frequency-scalable CPU and activate cpydyn/powernowd (default: no)
CONFIG_CPU='no'
-# create /etc/fstab (this also de-/activates swap-partition)
+# create/regenerate /etc/fstab using [grml-]rebuildfstab?
CONFIG_FSTAB='yes'
+# define uid for rebuildfstab used in /etc/fstab (default: grml):
+CONFIG_FSTAB_USER='grml'
+# define guid for rebuildfstab used in /etc/fstab (default: users):
+CONFIG_FSTAB_GROUP='users'
-# load ACPI/APM modules
+# load ACPI/APM modules (default: yes)
CONFIG_ACPI_APM='yes'
-# Enable DMA for all IDE drives - already done in initrd
-# but make sure it's done also on harddisk-installed systems
-CONFIG_DMA='yes'
-
-# set audio volumes
-CONFIG_MIXER='no'
-
-# start syslog-ng
+# start syslog-ng (default: yes)
CONFIG_SYSLOG='yes'
-# start gpm
+# start gpm (default: yes)
CONFIG_GPM='yes'
################################################################################
CONFIG_CDROM_SCRIPTS='yes' # run scripts from /cdrom/scripts
CONFIG_CONSOLE='yes' # activate mgetty when using console=... as bootparam
CONFIG_CREATE_MNT_DIRS='no' # create /mnt-directories
+CONFIG_DEBOOTSTRAP='yes' # support automatic installation of Debian via grml-deboostrap
CONFIG_DEBNET='yes' # search for /etc/network/interfaces on partitions and set up network afterwards
CONFIG_DEBS='yes' # check for bootoption debs for installing .debs
CONFIG_DEBUG='yes' # activate start of shells during startup at several stages
CONFIG_DISCOVER='no' # use discover for hardware detection
CONFIG_DISTCC='no' # activate and setup distcc through bootparam distcc=$NETWORK,$INTERFACE
+CONFIG_DISTRI='yes' # support some customization via bootoption distri
+CONFIG_DMA='yes' # Enable DMA for all IDE drives
CONFIG_EXTRACT='yes' # specify which (only in combination with bootparam myconfig/netconfig useful)
CONFIG_FAST='yes' # skip startup of w3m on tty1
CONFIG_FIREWIRE_DEV='no' # bugfix for kernel >=2.6.11 - create some firewire-devices
CONFIG_FIX_PASSWD='yes' # fix unionfs-problem with passwd
CONFIG_FIX_UNIONFS='yes' # fix/workaround for unionfs
-CONFIG_USERFSTAB='yes' # check for username of uid 1000
CONFIG_FWTIMEOUT='yes' # set timeout for firmware loading
CONFIG_GRML2HD='yes' # check for 'grml2hd' bootoption
CONFIG_HOMEDIR='yes' # check for persistent homedir option
CONFIG_HOSTNAME='yes' # set hostname to 'grml' on systems running from CD
-CONFIG_HOTPLUG_MAIN='no' # start hotplug system [should be handled by udev now]
CONFIG_HOTPLUG_AGENT='no' # deactivate specific hotplug agent(s) via bootparam
CONFIG_HOTPLUG_BLACKLIST='no' # check for blacklist bootparam
+CONFIG_HOTPLUG_MAIN='no' # start hotplug system [should be handled by udev now]
CONFIG_HWINFO='no' # run hwinfo for module-detection (requires bootparam 'hwinfo'!)
-CONFIG_INTERACTIVE='yes' # check for expert-mode as bootparam
+CONFIG_HWSPEAK='no' # support for hardware synthesizer via speakup
+CONFIG_IPW3945='yes' # check for broken ipw3945 module
+CONFIG_KERNEL='yes' # display information on running kernel
CONFIG_LANGUAGE='yes' # allow language specification via commandline
CONFIG_LD_MOD='yes' # run ldconfig and depmod on systems running from harddisk; remove /etc/grml.first.boot for forcing
CONFIG_LOCAL_NET='yes' # bring up loopback interface
CONFIG_LOG='yes' # DEBUG=/dev/null or logfile int /tmp/...
+CONFIG_LVM='yes' # logical volume setup
+CONFIG_MIXER='no' # set audio volumes [only in live-cd mode relevant, except for bootoption nosound]
CONFIG_MODEM='yes' # check for AC'97 Modem Controller modem
CONFIG_MODULES='yes' # load modules specified in /etc/grml/modules
CONFIG_MOUSE='yes' # show mouse information (expert-mode)
CONFIG_MYCONFIG='yes' # check if we want the config floppy
+CONFIG_MYPATH='yes' # provide setting additional paths via bootoption mypath
CONFIG_NETCONFIG='yes' # download configuration archive provided by bootoption netconfig=...
CONFIG_NETIPV6='yes' # check for bootparam ipv6
CONFIG_PASSWD='yes' # set password via bootparam passwd
CONFIG_PCMCIA='no' # check for pcmcia and start cardmgr
+CONFIG_QEMU='no' # qemu specific stuff
CONFIG_SERVICES='yes' # check for services to run, provided via bootparam
CONFIG_SETKEYCODES='yes' # run setkeycodes when bootoption setkeycodes found
CONFIG_SMALL='yes' # use a less "bloat" /etc/inittab for small computer with less RAM
CONFIG_TESTCD='yes' # CD checker
CONFIG_TIME='yes' # set clock, check for bootparam utc/gmt [only in live-mode]
CONFIG_TIMEZONE='yes' # get bootparam 'tz' and set it as /etc/localtime [only in live-mode]
+CONFIG_USERFSTAB='yes' # check for username of uid 1000
CONFIG_VMWARE='no' # vmware specific stuff (use xorg.conf.vmware)
CONFIG_WELCOME='yes' # play welcome sound (audio)
CONFIG_WONDERSHAPER='yes' # start wondershaper with options provided via bootparam