nofb Disable framebuffer
floppy Boot from floppydisk
hd / hd1 / hd2 / hd3 Boot from (local) primary / secondary /... harddisk
-failsafe Boot with (almost) no HW-detection
debug Get shells during process of booting for debugging
bootchart Create chart of booting sequence in /var/log/bootchart.tgz
forensic Do not touch any harddisks during hardware recognition
grml debs=path-name-wildcard Install Debian packages from DCS directory (see myconfig=,
typically the root of your ISO image). If path does not contain a
"/" the package(s) will be installed from directory "debs" of the
- DCS directory instead. The "path-name-wildcard" can contain
- wildcards (e.g. debs=rat* will install a packages starting with "rat"
- from directory debs/).
+ DCS directory instead. The "path-name-wildcard" can contain
+ wildcards (e.g. debs=rat* will install a packages starting with "rat"
+ from directory debs/).
grml scripts=path-name Execute script (defaulting to grml.sh) inside DCS dir. Path names
allowed. If path-name points to a directory, all scripts found in
the directory are executed.
grml config=path-name Unpack archive that path-name points to
grml noautoconfig Disable searching for device labeled GRMLCFG
+grml nobeep Disable welcome chime, sounded before grml-quickconfig starts.
Notice: Take a look at http://grml.org/config/ and 'man 1 grml-autoconfig'
for more information regarding the configuration framework of Grml.
[Note: releases before 2011.05 didn't support DNS but IP only.]
grml live-media-path=live Sets the path to the live filesystem on the medium
By default, it is set to /live
+grml nostats Don't send any information to the Grml project at startup.
+ Parameters sent are Grml version, if the cpu supports 64bit,
+ anonymized boot parameters and boot source (remote or local).
+ [Note: only available since release 2011.12]
grml module=grml Instead of using the default "$name.module" another file can
be specified without the extension ".module"; it should be placed
on "/live" directory of the live medium
grml nogpm Disable GPM daemon
grml noconsolefont Disable setting of console font (using consolechars)
grml noblank Disable console blanking
-grml tsplash Text based bootsplash
grml noquick Disable grml-quickconfig startup script
-grml small Do not start that many consoles
grml wondershaper=eth0,1000,500 Set up basic traffic shaping
grml services={postfix,mysql,...} Start service(s) which have an init-script (/etc/init.d/)
grml welcome Welcome message via soundoutput
startup of X again. (This bootoption is relevant for grml based derivatives
which decide to enable startx by default only, plain grml does not use
automatic startup of X by default.)
+grml vnc=password Start VNC server with startup of X.org and sets the password to the specified
+ one. To automatically start the VNC server use the startx bootoption.
+ [Note: Grml 2011.12+ doesn't include a VNC server.]
+grml vnc_connect=host[:port] Connect to a listening VNC client ("vncviewer -listen" reverse connection).
+ Can be used to connect from devices behind firewalls as connection is
+ initiated from the VNC server instead of the VNC client. Has to be
+ combined with the vnc bootoption.
+ [Note: Grml 2011.12+ doesn't include a VNC client.]
+
+Accessibility related settings:
+--------------------------------
+grml brltty=type,port,table Parameters for Braille device (e.g.: brltty=al,/dev/ttyS0,text.de.tbl)
+ See http://mielke.cc/brltty/guidelines.html for documentation.
Hardware related settings:
--------------------------
grml no{acpi,agp,cpu,dhcp} Skip parts of HW-detection (1)
grml no{dma,fstab,modem} Skip parts of HW-detection (2)
grml no{pcmcia,scsi,swap,usb} Skip parts of HW-detection (3)
-grml 915resolution=... Start resolution modify tool for Intel graphic chipset
- usage: $MODE,$XRESO,$YRESO
grml blacklist=modulename[,module2] Completely disable loading of specified module(s) via
blacklisting through udev's /etc/modprobe.d/grml
grml fwtimeout=50 Set firmware timeout via /sys/class/firmware/timeout to specified value
grml micvol=number Set mixer volume of microphone to level $number (default: 0)
grml pnpbios=off No PnP Bios initialization
grml acpi=off Disable ACPI Bios completely
-grml nousb2 Disable initialization of USB 2.x controller(s)
-grml nousb Disable initialization of USB in booting sequence
grml nofirewire Disable initialization of firewire devices in booting sequence
grml pci=irqmask=0x0e98 Try this, if PS/2 mouse doesn't work *)
grml pci=bios Workaround for bad PCI controllers