#!/bin/zsh
# Filename: autoconfig.functions
# Purpose: basic system configuration and hardware setup for grml system
-# Authors: grml-team (grml.org), (c) Klaus Knopper <knopper@knopper.net>, (c) Michael Prokop <mika@grml.org>
+# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
# Bug-Reports: see http://grml.org/bugs/
# License: This file is licensed under the GPL v2.
-# Latest change: Don Okt 12 13:00:04 CEST 2006 [mika]
################################################################################
# {{{ path, variables, signals, umask, zsh
-export PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin"
+export PATH="/bin:/sbin:/usr/bin:/usr/sbin"
DEBUG="/dev/null"
KERNEL="$(uname -r)"
+ARCH="$(uname -m)"
umask 022
+# old linuxrc version:
+[ -d /cdrom ] && export LIVECD_PATH=/cdrom
+# new initramfs layout:
+[ -d /live/image ] && export LIVECD_PATH=/live/image
+
# Ignore these signals in non-interactive mode: INT, TERM, SEGV
[ -z "$PS1" ] && trap "" 2 3 11
iszsh && setopt no_nomatch # || echo "Warning: not running under zsh!"
# }}}
-### {{{ Utility Functions
-
-# Simple shell grep
-stringinfile(){
- case "$(cat $2)" in *$1*) return 0;; esac
- return 1
-}
+# {{{ Read in boot parameters
+if [ -z "$CMDLINE" ]; then
+ # if CMDLINE was set from the outside, we're debugging.
+ # otherwise, take CMDLINE from Kernel and config files.
+ CMDLINE="$(cat /proc/cmdline)"
+ [ -d /cdrom/bootparams/ ] && CMDLINE="$CMDLINE $(cat /cdrom/bootparams/* | tr '\n' ' ')"
+ [ -d /live/image/bootparams/ ] && CMDLINE="$CMDLINE $(cat /live/image/bootparams/* | tr '\n' ' ')"
+ modprobe 9p 2>/dev/null || true
+ if grep -q 9p /proc/filesystems ; then
+ local TAG="grml-parameters"
+ if grep -q "$TAG" /sys/bus/virtio/devices/*/mount_tag 2>/dev/null ; then
+ local MOUNTDIR="$(mktemp -d)"
+ mount -t 9p -o trans=virtio,ro "$TAG" "$MOUNTDIR"
+ CMDLINE="$CMDLINE $(cat "$MOUNTDIR"/* 2>/dev/null | tr '\n' ' ')"
+ umount "$MOUNTDIR"
+ rmdir "$MOUNTDIR"
+ fi
+ fi
+fi
+# }}}
-# same for strings
-stringinstring(){
- case "$2" in *$1*) return 0;; esac
- return 1
-}
+### {{{ Utility Functions
-# Reread boot command line; echo last parameter's argument or return false.
+# Get a bootoption's parameter: read boot command line and either
+# echo last parameter's argument or return false.
getbootparam(){
- stringinstring " $1=" "$CMDLINE" || return 1
- result="${CMDLINE##*$1=}"
- result="${result%%[ ]*}"
- echo "$result"
- return 0
+ local line
+ local ws
+ ws=' '
+ line=" $CMDLINE "
+ case "$line" in
+ *[${ws}]"$1="*)
+ result="${line##*[$ws]$1=}"
+ result="${result%%[$ws]*}"
+ echo "$result"
+ return 0 ;;
+ *) # no match?
+ return 1 ;;
+ esac
}
# Check boot commandline for specified option
checkbootparam(){
- stringinstring " $1" "$CMDLINE"
- return "$?"
+ [ -n "$1" ] || ( echo "Error: missing argument to checkbootparam()" ; return 1 )
+ local line
+ local ws
+ ws=' '
+ line=" $CMDLINE "
+ case "$line" in
+ *[${ws}]"$1"=*|*[${ws}]"$1"[${ws}]*)
+ return 0 ;;
+ *)
+ return 1 ;;
+ esac
}
+# Check if currently using a framebuffer
+hasfb() {
+ [ -e /dev/fb0 ] && return 0 || return 1
+}
+
+# Check wheter a configuration variable (like $CONFIG_TOHD) is
+# enabled or not
checkvalue(){
- if [ "$1" = "yes" ] ; then
- return 0
- else
- return 1
- fi
+ case "$1" in
+ [yY][eE][sS]) return 0 ;; # it's set to 'yes'
+ [tT][rR][uU][eE]) return 0 ;; # it's set to 'true'
+ *) return 1 ;; # default
+ esac
}
+# Are we using grml-small?
checkgrmlsmall(){
grep -q small /etc/grml_version 2>>$DEBUG && return 0 || return 1
}
-checkgrmlusb(){
- grep -q usb /etc/grml_version 2>>$DEBUG && return 0 || return 1
-}
### }}}
# {{{ filesystems (proc, pts, sys) and fixes
}
mount_pts(){
- stringinfile "/dev/pts" /proc/mounts || mount -t devpts /dev/pts /dev/pts 2>/dev/null
+ grep -q "/dev/pts" /proc/mounts || mount -t devpts /dev/pts /dev/pts 2>/dev/null
}
mount_sys(){
}
# }}}
-# {{{ Read in boot parameters
-CMDLINE="$(cat /proc/cmdline)"
-[ -d /cdrom/bootparams/ ] && CMDLINE="$CMDLINE $(cat /cdrom/bootparams/* | tr '\n' ' ')"
-# }}}
-
-# {{{ Check if we are running from the grml-CD or HD
+# {{{ Check if we are running in live mode or from HD
INSTALLED=""
-[ -e /GRML/etc/grml_cd ] || INSTALLED="yes"
-
-# testcd
-TESTCD=""
-checkbootparam "testcd" >>$DEBUG 2>&1 && TESTCD="yes"
+[ -e /etc/grml_cd ] || INSTALLED="yes"
+# }}}
+
+# {{{ provide information about virtual environments
+VIRTUAL=false # assume physical system by default
+KVM=false
+VIRTUALBOX=false
+VMWARE=false
+
+if vmware-detect &>/dev/null; then
+ VIRTUAL=true; VMWARE=true; VIRTUAL_ENV='VMware'
+elif [ "$(virt-what 2>/dev/null)" = "kvm" ] || \
+ [ "$(imvirt 2>/dev/null)" = "KVM" ] ; then
+ VIRTUAL=true; KVM=true; VIRTUAL_ENV='KVM'
+elif [ "$(virt-what 2>/dev/null)" = "virtualbox" ] || \
+ [ "$(imvirt 2>/dev/null)" = "VirtualBox" ] ; then
+ VIRTUAL=true; VIRTUALBOX=true; VIRTUAL_ENV='VirtualBox'
+fi
# }}}
# {{{ source lsb-functions , color handling
-if checkbootparam "nocolor"; then
+if checkbootparam 'nocolor'; then
RC_NOCOLOR=yes
. /etc/grml/lsb-functions
einfo "Disabling colors in bootsequence as requested on commandline." ; eend 0
# {{{ debug
config_debug(){
- if checkbootparam "debug"; then
- BOOTDEBUG="yes"
- fi
- if stringinstring "BOOT_IMAGE=debug " "$CMDLINE" ; then
- BOOTDEBUG="yes"
- fi
+ checkbootparam 'debug' && BOOTDEBUG="yes"
+ checkbootparam "BOOT_IMAGE=debug" && BOOTDEBUG="yes"
+
rundebugshell(){
if [ -n "$BOOTDEBUG" ]; then
- einfo "Starting intermediate shell stage $stage as requested by \"debug\" option."
- eindent
- if [ -r /etc/grml/screenrc ] ; then
- einfo "Starting GNU screen to be able to use a full featured shell environment."
- einfo "Just exit the shells (and therefore screen) to continue boot process..."
- /bin/zsh -c "screen -c /etc/grml/screenrc"
- else
- einfo "Notice that the shell does not provide job handling: ctrl-z, bg and fg won't work!"
- einfo "Just exit the shell to continue boot process..."
- /bin/zsh
- fi
- eoutdent
+ einfo "Starting intermediate shell stage $stage as requested by \"debug\" option."
+ if [ grep -q "debug=noscreen" "$CMDLINE" ] ; then
+ einfo "Notice that the shell does not provide job handling: ctrl-z, bg and fg won't work!"
+ einfo "Just exit the shell to continue boot process..."
+ /bin/zsh
+ else
+ eindent
+ if [ -r /etc/grml/screenrc ] ; then
+ einfo "Starting GNU screen to be able to use a full featured shell environment."
+ einfo "Just exit the shells (and therefore screen) to continue boot process..."
+ /bin/zsh -c "screen -c /etc/grml/screenrc"
+ else
+ einfo "Notice that the shell does not provide job handling: ctrl-z, bg and fg won't work!"
+ einfo "Just exit the shell to continue boot process..."
+ /bin/zsh
+ fi
+ eoutdent
+ fi
fi
}
}
# {{{ log
config_log(){
-if checkbootparam "log"; then
- export DEBUG="/tmp/grml.log.`date +%Y%m%d`"
- touch $DEBUG
- einfo "Bootparameter log found. Log files: ${DEBUG} and /var/log/boot."
- eindent
- einfo "Starting bootlogd."
- bootlogd -r -c 1>>$DEBUG 2>&1 ; eend $?
- eoutdent
+if checkbootparam 'log' || checkbootparam 'debug' ; then
+ export DEBUG="/tmp/grml.log.`date +%Y%m%d`"
+ touch $DEBUG
+ einfo "Bootparameter log found. Log files: ${DEBUG} and /var/log/boot"
+ eindent
+ einfo "Starting bootlogd." # known to be *very* unreliable :(
+ bootlogd -r -c >>$DEBUG 2>&1 ; eend $?
+ eoutdent
else
- DEBUG="/dev/null"
+ DEBUG="/dev/null"
fi
}
# }}}
-# {{{ Check if we are in interactive startup mode
-INTERACTIVE=""
-stringinstring "BOOT_IMAGE=expert " "$CMDLINE" && INTERACTIVE="yes"
-# }}}
-
# {{{ set firmware timeout via bootparam
config_fwtimeout(){
- if checkbootparam fwtimeout ; then
+ if checkbootparam 'fwtimeout' ; then
TIMEOUT="$(getbootparam 'fwtimeout' 2>>$DEBUG)"
einfo "Bootoption fwtimeout found. (Re)Loading firmware_class module."
- rmmod firmware_class 1>>$DEBUG 2>&1
+ rmmod firmware_class >>$DEBUG 2>&1
modprobe firmware_class ; eend $?
fi
if [ -z "$TIMEOUT" ] ; then
fi
if [ -f /sys/class/firmware/timeout ] ; then
einfo "Setting timeout for firmware loading to ${TIMEOUT}."
- echo 100 > /sys/class/firmware/timeout ; eend $?
+ echo $TIMEOUT > /sys/class/firmware/timeout ; eend $?
fi
}
# }}}
einfo "Activating language settings:"
eindent
- # people can specify $LANGUAGE and $CONSOLEFONT in a config file:
+ # people can specify $LANGUAGE and $CONSOLEFONT in a config file
[ -r /etc/grml/autoconfig ] && . /etc/grml/autoconfig
- grep -q ' lang=.*-utf8' /proc/cmdline && UTF8='yes' || UTF8=''
-
- # check for bootoption which overrides config from /etc/grml/autoconfig:
- BOOT_LANGUAGE="$(getbootparam lang 2>>$DEBUG)"
+ # check for bootoption which overrides config from /etc/grml/autoconfig
+ BOOT_LANGUAGE="$(getbootparam 'lang' 2>>$DEBUG)"
[ -n "$BOOT_LANGUAGE" ] && LANGUAGE="$BOOT_LANGUAGE"
- # set default to 'en' in live-cd mode if $LANGUAGE is not yet set:
+ # set default to 'en' in live-cd mode iff $LANGUAGE is not set yet
if [ -z "$INSTALLED" ] ; then
[ -n "$LANGUAGE" ] || LANGUAGE='en'
fi
- # if bootoption lang is used update /etc/default/locale, otherwise *not*!
- if [ -n "$BOOT_LANGUAGE" ] ; then
- [ -x /usr/sbin/grml-setlang ] && /usr/sbin/grml-setlang "$LANGUAGE"
+ if [ -x /usr/sbin/grml-setlang ] ; then
+ # if bootoption lang is used update /etc/default/locale accordingly
+ if [ -n "$BOOT_LANGUAGE" ] ; then
+ /usr/sbin/grml-setlang "$LANGUAGE"
+ # otherwise default to lang=en
+ else
+ /usr/sbin/grml-setlang "en"
+ fi
fi
# set console font
if [ -z "$CONSOLEFONT" ] ; then
- if ! checkbootparam "nodefaultfont" >>$DEBUG 2>&1 ; then
- # [ -n "$UTF8" ] && CONSOLEFONT='LatArCyrHeb-16' || CONSOLEFONT='Lat15-Terminus16'
- if [ -r /usr/share/consolefonts/Lat15-Terminus16.psf.gz ] ; then
- CONSOLEFONT='Lat15-Terminus16'
+ if ! checkbootparam 'nodefaultfont' >>$DEBUG 2>&1 ; then
+ if [ -r /usr/share/consolefonts/Uni3-Terminus16.psf.gz ] ; then
+ CONSOLEFONT='Uni3-Terminus16'
else
- ewarn "/usr/share/consolefonts/Lat15-Terminus16.psf.gz not available. Please upgrade package console-terminus." ; eend 1
+ ewarn "/usr/share/consolefonts/Uni3-Terminus16.psf.gz not available. Please upgrade package console-terminus." ; eend 1
+ fi
+ if ! hasfb ; then
+ CONSOLEFONT='Lat15-Terminus16'
fi
fi
fi
# export it now, so error messages get translated, too
- if checkgrmlsmall ; then
- export LANG='C' # grml-small does not provide any further locales
- else
- [ -r /etc/default/locale ] && . /etc/default/locale
- export LANG LANGUAGE
- fi
+ [ -r /etc/default/locale ] && . /etc/default/locale
+ export LANG LANGUAGE
# configure keyboard layout, read in already set values first:
[ -r /etc/sysconfig/keyboard ] && . /etc/sysconfig/keyboard
# now allow keyboard override by boot commandline for later use:
- KKEYBOARD="$(getbootparam keyboard 2>>$DEBUG)"
+ KKEYBOARD="$(getbootparam 'keyboard' 2>>$DEBUG)"
[ -n "$KKEYBOARD" ] && KEYTABLE="$KKEYBOARD"
# notce: de/at is a bad choice, so take de-latin1-nodeadkeys instead:
[[ "$KKEYBOARD" == 'de' ]] && KEYTABLE=de-latin1-nodeadkeys
local LANGUAGE="$BOOT_LANGUAGE"
. /etc/grml/language-functions
# allow setting xkeyboard explicitly different than console keyboard
- KXKEYBOARD="$(getbootparam xkeyboard 2>>$DEBUG)"
+ KXKEYBOARD="$(getbootparam 'xkeyboard' 2>>$DEBUG)"
if [ -n "$KXKEYBOARD" ]; then
XKEYBOARD="$KXKEYBOARD"
KDEKEYBOARD="$KXKEYBOARD"
# duplicate of previous code to make sure /etc/grml/language-functions
# does not overwrite our values....
# now allow keyboard override by boot commandline for later use:
- KKEYBOARD="$(getbootparam keyboard 2>>$DEBUG)"
+ KKEYBOARD="$(getbootparam 'keyboard' 2>>$DEBUG)"
[ -n "$KKEYBOARD" ] && KEYTABLE="$KKEYBOARD"
# notce: de/at is a bad choice, so take de-latin1-nodeadkeys instead:
[[ "$KKEYBOARD" == 'de' ]] && KEYTABLE=de-latin1-nodeadkeys
[[ "$KKEYBOARD" == 'at' ]] && KEYTABLE=de-latin1-nodeadkeys
# write keyboard related variables to file for later use
- echo "KEYTABLE=\"$KEYTABLE\"" > /etc/sysconfig/keyboard
- echo "XKEYBOARD=\"$XKEYBOARD\"" >> /etc/sysconfig/keyboard
- echo "KDEKEYBOARD=\"$KDEKEYBOARD\"" >> /etc/sysconfig/keyboard
- echo "KDEKEYBOARDS=\"$KDEKEYBOARDS\"" >> /etc/sysconfig/keyboard
+ [ -d /etc/sysconfig ] || mkdir /etc/sysconfig
+ if ! [ -e /etc/sysconfig/keyboard ] ; then
+ echo "KEYTABLE=\"$KEYTABLE\"" > /etc/sysconfig/keyboard
+ echo "XKEYBOARD=\"$XKEYBOARD\"" >> /etc/sysconfig/keyboard
+ echo "KDEKEYBOARD=\"$KDEKEYBOARD\"" >> /etc/sysconfig/keyboard
+ echo "KDEKEYBOARDS=\"$KDEKEYBOARDS\"" >> /etc/sysconfig/keyboard
+ fi
fi
[ -r /etc/sysconfig/keyboard ] && . /etc/sysconfig/keyboard
- # Set default keyboard before interactive setup
- if [ -n "$KEYTABLE" ] ; then
- einfo "Running loadkeys for ${WHITE}${KEYTABLE}${NORMAL} in background"
- loadkeys -q $KEYTABLE &
- eend $?
- fi
+ # activate unicode console if running within utf8 environment
+ if [ -r /etc/default/locale ] ; then
+ if grep -q "LANG=.*UTF" /etc/default/locale ; then
+ einfo "Setting up unicode environment."
+ unicode_start >>$DEBUG 2>&1 ; eend $?
+ fi
+ fi
- if [ -n "$CONSOLEFONT" ] ; then
- einfo "Running consolechars using ${CONSOLEFONT}"
- consolechars -f $CONSOLEFONT || consolechars -d
- eend $?
+ # Set default keyboard before interactive setup
+ if [ -n "$KEYTABLE" ] ; then
+ einfo "Running loadkeys for ${WHITE}${KEYTABLE}${NORMAL} in background"
+ loadkeys -q $KEYTABLE &
+ eend $?
+ fi
- if [ -n "$UTF8" ] ; then
- einfo "Notice: run 'filterm - dynafont' in your shell to enable a unicode capable console."
- fi
- fi
+ # we have to set up all consoles, therefore loop it over all ttys:
+ NUM_CONSOLES=$(fgconsole --next-available 2>/dev/null)
+ if [ -n "$NUM_CONSOLES" ] ; then
+ NUM_CONSOLES=$(expr ${NUM_CONSOLES} - 1)
+ [ ${NUM_CONSOLES} -eq 1 ] && NUM_CONSOLES=6
+ fi
+ CUR_CONSOLE=$(fgconsole 2>/dev/null)
- # we have to set up all consoles, therefore loop it over all ttys:
- if [ -n "$CHARMAP" ] ; then
- einfo "Running consolechars for ${CHARMAP}"
- NUM_CONSOLES=`fgconsole --next-available`
- NUM_CONSOLES=`expr ${NUM_CONSOLES} - 1`
- [ ${NUM_CONSOLES} -eq 1 ] && NUM_CONSOLES=6
- for vc in `seq 0 ${NUM_CONSOLES}` ; do
- consolechars --tty=/dev/tty${vc} -m ${CHARMAP} ; RC=$?
- done
- eend ${RC}
- fi
+ if [ -x "$(which setfont)" ] ; then
+ use_setfont=true
+ elif [ -x "$(which consolechars)" ] ; then
+ use_consolechars=true
+ else
+ eerror "Neither setfont nor consolechars tool present, can not set font."
+ eend 1
+ return 1
+ fi
+
+ if [ -n "$CHARMAP" ] ; then
+ einfo "Setting font to ${CHARMAP}"
+ RC=0
+ for vc in $(seq 0 ${NUM_CONSOLES}) ; do
+ if $use_setfont ; then
+ setfont -C /dev/tty${vc} $CHARMAP ; RC=$?
+ elif $use_consolechars ; then
+ consolechars --tty=/dev/tty${vc} -m ${CHARMAP} ; RC=$?
+ fi
+ done
+ if [ -n "$CUR_CONSOLE" ] ; then
+ [ "$CUR_CONSOLE" != "serial" ] && chvt $CUR_CONSOLE
+ fi
+ eend $RC
+ fi
+
+ if checkbootparam 'noconsolefont' ; then
+ ewarn "Skipping setting console font as requested on boot commandline." ; eend 0
+ else
+ if [ -n "$CONSOLEFONT" ] ; then
+ einfo "Setting font to ${CONSOLEFONT}"
+ RC=0
+ for vc in $(seq 0 ${NUM_CONSOLES}) ; do
+ if $use_setfont ; then
+ setfont -C /dev/tty${vc} ${CONSOLEFONT} ; RC=$?
+ elif $use_consolechars ; then
+ consolechars --tty=/dev/tty${vc} -f ${CONSOLEFONT} ; RC=$?
+ fi
+ done
+ if [ -n "$CUR_CONSOLE" ] ; then
+ [ "$CUR_CONSOLE" != "serial" ] && chvt $CUR_CONSOLE
+ fi
+ eend $RC
+ fi
+ fi
eoutdent
}
# {{{ Set hostname
config_hostname(){
- if checkbootparam hostname ; then
+ if ! checkbootparam 'hostname' ; then
+ return 0
+ fi
+
HOSTNAME="$(getbootparam 'hostname' 2>>$DEBUG)"
+ if [ -z "$HOSTNAME" ] && [ -x /usr/bin/random-hostname ] ; then
+ einfo "Generating random hostname as no hostname was specified."
+ HOSTNAME="$(/usr/bin/random-hostname)"
+ eend $?
+ fi
+
einfo "Setting hostname to $HOSTNAME as requested."
- sed -i "s/^127.0.0.1.*localhost/127.0.0.1 $HOSTNAME localhost/" /etc/hosts
- hostname $HOSTNAME ; eend $?
- else
- hostname --file /etc/hostname
- fi
+ grml-hostname $HOSTNAME >>$DEBUG
+ eend $?
}
# }}}
# fstabuser (needed when running from harddisk with username != grml {{{
config_userfstab(){
- fstabuser=$(getent passwd 1000 | cut -d: -f1)
- [ -n "$fstabuser" ] || fstabuser='grml'
+ # force load of build-in and local config
+ [ -r /etc/grml/autoconfig ] && . /etc/grml/autoconfig
+ [ -r /etc/grml/autoconfig ] && . /etc/grml/autoconfig.local
+
+ # 1st. try configured fstab user
+ if [ -n "$CONFIG_FSTAB_USER" ] ; then
+ fstabuser=$(getent passwd $CONFIG_FSTAB_USER | cut -d: -f1)
+ fi
+
+ # 2nd. use standard user id
+ [ -n "$fstabuser" ] || fstabuser=$(getent passwd 1000 | cut -d: -f1)
+
+ # 3rd. use standard user name
+ [ -n "$fstabuser" ] || fstabuser=$(getent passwd grml | cut -d: -f1)
+
+ # if not yet set fall back to 'root' user, avoid bad /etc/fstab
+ [ -n "$fstabuser" ] || fstabuser='root'
+}
+# }}}
+
+# local_user (needed when running with username != grml {{{
+config_userlocal() {
+
+ # force load of build-in and local config
+ [ -r /etc/grml/autoconfig ] && . /etc/grml/autoconfig
+ [ -r /etc/grml/autoconfig ] && . /etc/grml/autoconfig.local
+
+ # 1st. try id of primary user
+ localuser=$(getent passwd 1000 | cut -d: -f1)
+
+ # 2nd. use name standard user
+ [ -n "$localuser" ] || localuser=$(getent passwd grml | cut -d: -f1)
+}
+# }}}
+
+# {{{ mount configfs
+config_configfs() {
+ einfo "Mounting configfs"
+ CONFIGFS_DIR=/sys/kernel/config/
+ modprobe configfs 2>/dev/null 1>&2
+ if ! [ -d "$CONFIGFS_DIR" ] ; then
+ eindent
+ einfo "$CONFIGFS_DIR does not exist, can't mount directory"
+ eend 1
+ eoutdent
+ else
+ mount -t configfs configfs "$CONFIGFS_DIR" 2>/dev/null 1>&2
+ eend $?
+ fi
}
# }}}
config_time(){
# don't touch the files if running from harddisk:
if [ -z "$INSTALLED" ]; then
- UTC=""
- checkbootparam utc >>$DEBUG 2>&1 && UTC="-u"
- checkbootparam gmt >>$DEBUG 2>&1 && UTC="-u"
- # hwclock uses the TZ variable
- export TZ
- hwclock $UTC -s
+ # The default hardware clock timezone is stated as representing local time.
+ UTC="--localtime"
+ grep -q "^UTC=" /etc/default/rcS || echo "UTC=no" >> /etc/default/rcS
+ checkbootparam 'utc' >>$DEBUG 2>&1 && sed -i "s|^UTC=.*$|UTC=yes|" /etc/default/rcS
+ checkbootparam 'gmt' >>$DEBUG 2>&1 && sed -i "s|^UTC=.*$|UTC=yes|" /etc/default/rcS
+ checkbootparam 'localtime' >>$DEBUG 2>&1 && sed -i "s|^UTC=.*$|UTC=no|" /etc/default/rcS
+ grep -q -i "^UTC=yes" /etc/default/rcS && UTC="-u"
+ # hwclock uses the TZ variable
+ KTZ="$(getbootparam 'tz' 2>>$DEBUG)"
+ [ -z "$KTZ" ] && [ -r /etc/timezone ] && KTZ=$(cat /etc/timezone)
+ if [ ! -f "/usr/share/zoneinfo/$KTZ" ] ; then
+ ewarn "Warning: unknown timezone $KTZ" ; eend 1
+ KTZ="Europe/Vienna"
+ ewarn "Falling back to timezone $KTZ" ; eend 0
+ fi
+
+ if ! [ -r /dev/rtc ] ; then
+ ewarn "Warning: realtime clock not available, trying to execute hwclock anyway." ; eend 0
+ fi
+
+ ERROR=$(TZ="$KTZ" hwclock $UTC -s 2>&1 | head -1) ; RC=$?
+ if [ -n "$ERROR" ] ; then
+ eindent
+ ERROR=$(TZ="$KTZ" hwclock $UTC -s --directisa 2>&1 | head -1)
+ if [ -n "$ERROR" ] ; then
+ eerror "Problem running hwclock: $ERROR" ; eend 1
+ fi
+ eoutdent
+ fi
+
fi
}
# }}}
# {{{ print kernel info
config_kernel(){
- vmware-detect &>/dev/null && VMWARE="inside ${WHITE}VMWare${NORMAL}"
- einfo "Running Linux Kernel $KERNEL $VMWARE" ; eend 0
-}
-# }}}
+ if $VIRTUAL ; then
+ einfo "Running Linux Kernel $KERNEL $VMWARE" ; eend 0
+ else
+ einfo "Running Linux Kernel $KERNEL inside $VIRTUAL_ENV" ; eend 0
+ fi
-# {{{ vmware specific stuff
-config_vmware(){
-if checkbootparam novmware ; then
- ewarn "Skipping running vmware specific stuff as requested on boot commandline." ; eend 0
-else
- if [ -z "$INSTALLED" ]; then
- if vmware-detect ; then
- if [ -r /etc/X11/xorg.conf.vmware ] ; then
- einfo "Copying /etc/X11/xorg.conf.vmware to /etc/X11/xorg.conf"
- cp /etc/X11/xorg.conf.vmware /etc/X11/xorg.conf ; eend $?
+ if [ -r /proc/cpuinfo ] ; then
+ if egrep -q '^flags.*(vmx|svm)' /proc/cpuinfo ; then
+ eindent
+ einfo 'CPU(s) featuring virtualization technology detected' ; eend 0
+ eoutdent
fi
fi
- fi
-fi
-}
-# }}}
-
-# {{{ installed on hd?
-config_checkfs(){
-if [ -n "$INSTALLED" ]; then
- einfo "Running from HD, checking filesystems."
-# We are running from HD, so a file system check is recommended
- [ -f /etc/init.d/checkroot.sh ] && /etc/init.d/checkroot.sh
- [ -f /etc/init.d/checkfs.sh ] && /etc/init.d/checkfs.sh
- eend 0
-fi
-}
-# }}}
-# {{{ / must be read-write in any case, starting from here
-config_remount_root(){
- mount -o remount,rw / 2>>$DEBUG
+ if [ -d /proc/xen ] ; then
+ eindent
+ einfo 'Running kernel featuring support for Xen detected' ; eend 0
+ eoutdent
+ fi
}
# }}}
}
# }}}
-# update_progress {{{
-update_progress(){
- # be sure we are non-blocking
- (echo "$1" > /etc/sysconfig/progress) &
-}
-# }}}
-
# {{{ timezone
config_timezone(){
# don't touch the files if running from harddisk:
if [ -z "$INSTALLED" ]; then
- einfo "Setting timezone."
- KTZ="$(getbootparam tz 2>>$DEBUG)"
- [ -f "/usr/share/zoneinfo/$KTZ" ] && TZ="$KTZ"
- rm -f /etc/localtime
- cp "/usr/share/zoneinfo/$TZ" /etc/localtime && eend 0
+ KTZ="$(getbootparam 'tz' 2>>$DEBUG)"
+ if [ -n "$KTZ" ] ; then
+ if [ ! -f "/usr/share/zoneinfo/$KTZ" ]
+ then
+ ewarn "Warning: unknown timezone $KTZ"; eend 0
+ else
+ einfo "Setting timezone."
+ # update debconf
+ area=$(echo $KTZ | cut -d '/' -f1)
+ zone=$(echo $KTZ | cut -d '/' -f2)
+ echo "tzdata tzdata/Areas select $area" | debconf-set-selections
+ echo "tzdata tzdata/Zones/$area select $zone" | debconf-set-selections
+ # update files
+ echo $KTZ > /etc/timezone
+ rm -f /etc/localtime
+ cp "/usr/share/zoneinfo/$KTZ" /etc/localtime ; eend $?
+ fi
+ fi
fi
}
# }}}
# MEM=$(/usr/bin/gawk 'BEGIN{m=0};/MemFree|Cached|SwapFree/{m+=$2};END{print m}' /proc/meminfo)
eindent
-if checkbootparam "small"; then
+if checkbootparam 'small'; then
einfo "Information: ${RAM} kB of RAM available." ; eend 0
einfo "Bootoption small detected. Activating small system."
if [ -r /etc/inittab.small ] ; then
# skip startup of w3m {{{
config_fast(){
-if checkbootparam "fast"; then
- ewarn "Bootoption fast detected. Skipping startup of w3m."
- sed -i 's#^1:.*#1:12345:respawn:/usr/bin/openvt -f -c 1 -w -- /bin/zsh#' /etc/inittab
+if checkbootparam 'fast'; then
+ ewarn "Bootoption fast detected. Skipping startup of grml-quickconfig."
+ sed -i '/1:/s#/usr/share/grml-scripts/run-welcome#/bin/zsh#' /etc/inittab
/sbin/telinit q ; eend $?
fi
}
# activate serial console {{{
config_console(){
-if checkbootparam "console"; then
- einfo "Bootoption (for serial) console detected. Activating mgetty."
- sed -i 's/^#T0/T0/' /etc/inittab
- sed -i 's/^#T1/T1/' /etc/inittab
- /sbin/telinit q ; eend $?
-fi
-}
-# }}}
-
-# For burning on IDE-CD-Roms, k3b (and others) check for special permissions {{{
-config_cdrom_perm(){
-CDROMS=""
-for DEVICE in /proc/ide/hd?; do
- [ "$(cat $DEVICE/media 2>/dev/null)" = "cdrom" ] && CDROMS="$CDROMS /dev/${DEVICE##*/}"
-done
-[ -n "$CDROMS" ] && { chown root.cdrom $CDROMS; chmod 666 $CDROMS; } 2>/dev/null
-}
-# }}}
-
-# {{{ Bring up loopback interface now
-config_local_net(){
- if [ -z "$INSTALLED" ] ; then
- grep -q lo=lo /etc/network/run/ifstate 2>/dev/null || ifup lo
- fi
-}
-# }}}
+if checkbootparam 'console'; then
+ local line
+ local ws
+ ws=' '
+
+ einfo "Bootoption for serial console detected:"
+
+ line="$CMDLINE x "
+ this=""
+ line="${line#*[$ws]}"
+ local telinitq=""
+ while [ -n "$line" ]; do
+ case "$this" in
+ console=*)
+ local serial="$this"
+ local device="${this%%,*}"
+ local device="${device##*=}"
+ if echo $serial | grep -q ttyS ; then
+ local option="${serial##*,}"
+ # default (works for kvm & CO):
+ local speed="115200,57600,38400,19200,9600,4800,2400,1200";
+ # ... unless overriden by command line:
+ case "$option" in
+ 115200*) speed=115200 ;;
+ 57600*) speed=57600 ;;
+ 38400*) speed=38400 ;;
+ 19200*) speed=19200 ;;
+ 9600*) speed=9600 ;;
+ 4800*) speed=4800 ;;
+ 2400*) speed=2400 ;;
+ 1200*) speed=1200 ;;
+ esac
+ eindent
+ einfo "Activating console login on device ${device} with speed ${speed}."
+ local number="${device#ttyS}"
+ sed -i "/^T$number:/d;/^#grmlserial#/iT$number:23:respawn:/bin/bash -c \"/sbin/getty -L $device -l /usr/share/grml-scripts/run-welcome $speed vt100 || sleep 30\"" /etc/inittab
+ eend $?
+ telinitq="1"
+ eoutdent
+ fi
+ ;;
+ esac
+ this="${line%%[$ws]*}"
+ line="${line#*[$ws]}"
+ done
-# firewire devices {{{
-# the raw1394 driver does not yet export info into SYSFS,
-# so let's create raw1394 device manually
-# http://www.michael-prokop.at/blog/index.php?p=352
-config_firewire_dev(){
-if checkbootparam "nofirewiredev" ; then
- ewarn "Skipping creating some firewire devices as requested on boot commandline." ; eend 0
-else
-#if [ "${KERNEL%-*}" == "2.6.11" ] ; then
- einfo "Creating some firewire devices (fix kernel 2.6-bug)."
-# cd /dev && MAKEDEV video1394 raw1394
- [ -r /dev/raw1394 ] || mknod /dev/raw1394 c 171 0
- [ -r /dev/video1394 ] || mknod -m 666 /dev/video1394 c 171 16
-# mknod -m 666 /dev/dv1394 c 171 32 # for NTSC
- [ -r /dev/dv1394 ] || mknod -m 666 /dev/dv1394 c 171 34 # for PAL
- chown -R root:video /dev/raw1394 /dev/video1394 /dev/dv1394
- chmod -R 664 /dev/raw1394 /dev/video1394 /dev/dv1394 ; eend $?
+ if [ -n "$telinitq" ]; then
+ /sbin/telinit q
+ fi
+ eend $?
fi
-#fi
}
# }}}
# {{{ CD Checker
config_testcd(){
-if [ -n "$TESTCD" ]; then
+if checkbootparam 'testcd' ; then
einfo "Checking CD data integrity as requested by '${WHITE}testcd${NORMAL}' boot option."
- einfo "Reading files and checking against GRML/md5sums, this may take a while..."
- echo -n "${RED}"
- ( cd /cdrom/GRML/ ; rm -f /tmp/md5sum.log ; md5sum -c md5sums 2>&1 | tee /tmp/md5sum.log )
- if [ "$?" = "0" ]; then
- echo " ${GREEN}Everything looks OK${NORMAL}"
- else
- echo "${RED} *** CHECKSUM FAILED FOR THESE FILES: ***"
- egrep -v '(^md5sum:|OK$)' /tmp/md5sum.log
- echo "${RED} *** DATA ON YOUR CD MEDIUM IS POSSIBLY INCOMPLETE OR DAMAGED, ***${NORMAL}"
- echo "${RED} *** OR YOUR COMPUTER HAS BAD RAM. ***${NORMAL}"
- echo -n "${CYAN}Hit return to contine, or press the reset button to quit.${NORMAL}\a\a\a "
- read a
- fi
- eend 0
-fi
-}
-# }}}
+ eindent
-# {{{ hardware detection via discover
-config_discover(){
-if checkbootparam "nodisc" ; then
- ewarn "Skipping hardware detection via discover as requested on boot commandline." ; eend 0
-else
- if [ -x /sbin/discover ] ; then
- einfo "Discovering hardware. Trying to load the following modules in background:"
- eindent
- einfo "$(discover --data-path=linux/module/name --data-path=linux/modules/options --format="%s %s" --data-version=`uname -r` --enable-bus all | sort -u | xargs echo)"
- eoutdent
- /sbin/discover-modprobe -v 1>>$DEBUG 2>&1 &
- eend 0
- else
- eerror "Application discover not available. Information: udev should handle hardware recognition." ; eend 0
- fi
-fi
-}
-# }}}
+ local ERROR=true
+ local FOUND_FILE=false
+ local logfile='/tmp/md5sum.log'
-# {{{ hardware detection via hwinfo
-config_hwinfo(){
-if checkbootparam hwinfo >>$DEBUG 2>&1; then
- einfo "Discovering hardware via hwinfo:"
- MODULES=$(su grml hwinfo | grep "Cmd: \"modprobe" | awk '{print $5}' | sed 's/"//')
- echo -n " Loading modules: "
- for i in `echo $MODULES` ; do echo -n $i && modprobe $i ; done
- eend 0
-fi
-}
-# }}}
+ rm -f "$logfile"
+
+ for md5 in $(find "${LIVECD_PATH}" -name md5sums) ; do
+ einfo "Checking files against $md5, this may take a while..."
-# {{{ disable hotplug agents on request
-config_hotplug_agent(){
-if checkbootparam "noagent" ; then
- AGENT="$(getbootparam 'noagent' 2>>$DEBUG)"
- AGENTLIST=$(echo "$AGENT" | sed 's/,/\\n/g')
- AGENTNL=$(echo "$AGENT" | sed 's/,/ /g')
- einfo "Disabling hotplug-agent(s) $AGENTNL"
- for agent in $(echo -e $AGENTLIST) ; do
- mv /etc/hotplug/${agent}.rc /etc/hotplug/${agent}.norc
+ FOUND_FILE=true
+ OLD_PWD=$(pwd)
+ cd $(dirname "$md5")
+ md5sum -c $(basename "$md5") |& tee -a "${logfile}"
+ if [ $pipestatus[1] -eq 0 ] ; then
+ ERROR=false
+ fi
+ cd "${OLD_PWD}"
done
- [ "$?" == "0" ] ; eend $?
-fi
-}
-# }}}
-# {{{ blacklist of hotplug-modules
-config_hotplug_blacklist(){
-if checkbootparam "black" ; then
- BLACK="$(getbootparam 'black' 2>>$DEBUG)"
- BLACKLIST=$(echo "$BLACK" | sed 's/,/\\n/g')
- BLACKNL=$(echo "$BLACK" | sed 's/,/ /g')
- einfo "Blacklisting $BLACKNL via /etc/hotplug/blacklist.d/hotplug-light"
- echo -e "$BLACKLIST" >> /etc/hotplug/blacklist.d/hotplug-light
- echo -e "$BLACKLIST" >> /etc/hotplug/blacklist
- eend 0
-fi
-}
-# }}}
+ if ! $FOUND_FILE ; then
+ eerror 'Error: Could not find md5sum file' ; eend 1
+ return
+ fi
-# {{{ run hotplug
-config_hotplug(){
-if checkbootparam "nohotplug" ; then
- ewarn "Skipping running hotplug as requested on boot commandline." ; eend 0
-else
- if [ -r /etc/init.d/hotplug ] ; then
- einfo "Starting hotplug system in background."
- /etc/init.d/hotplug start 1>>$DEBUG 2>>$DEBUG &
- eend 0
- elif [ -r /etc/init.d/hotplug-light ] ; then
- einfo "Starting hotplug-light system in background."
- /etc/init.d/hotplug-light start 1>>$DEBUG 2>>$DEBUG &
- eend 0
+ if ! $ERROR ; then
+ einfo "Everything looks OK" ; eend 0
else
- ewarn "No hotplug system found. Should be handled by udev. Skipping execution." ; eend 0
+ eerror 'Checksum failed for theses files:' ; eend 1
+ egrep -v '(^md5sum:|OK$)' "${logfile}"
+ eerror 'Data on the medium is possibly incomplete/damaged or RAM of your system is broken.' ; eend 1
+ einfon "Hit return to continue, or press the power button to shut down system."
+ read a
fi
+
+ eoutdent
fi
}
# }}}
-# {{{ blacklist specific module
+# {{{ blacklist specific module [ used in /etc/init.d/udev ]
config_blacklist(){
-if checkbootparam "blacklist" ; then
+if checkbootparam 'blacklist' ; then
if [ -z "$INSTALLED" ]; then
einfo "Bootoption blacklist found."
BLACK="$(getbootparam 'blacklist' 2>>$DEBUG)"
+ BLACKLIST_FILE='/etc/modprobe.d/grml.conf'
if [ -n "$BLACK" ] ; then
- einfo "Blacklisting module ${BLACK} via /etc/modprobe.d/grml."
- echo "# begin entry generated by config_blacklist of grml-autoconfig" >> /etc/modprobe.d/grml
- echo "blacklist $BLACK" >> /etc/modprobe.d/grml
- echo "alias $BLACK off" >> /etc/modprobe.d/grml
- echo "# end entry generated by config_blacklist of grml-autoconfig" >> /etc/modprobe.d/grml ; eend $?
+ for module in $(echo ${BLACK//,/ }) ; do
+ einfo "Blacklisting module ${module} via ${BLACKLIST_FILE}."
+ echo "# begin entry generated by config_blacklist of grml-autoconfig" >> "$BLACKLIST_FILE"
+ echo "blacklist $module" >> "$BLACKLIST_FILE"
+ echo "alias $module off" >> "$BLACKLIST_FILE"
+ echo "# end entry generated by config_blacklist of grml-autoconfig" >> "$BLACKLIST_FILE" ; eend $?
+ done
else
- eerror "No given module for blacklist found. Blacklisting will not work therefor."
+ eerror "No given module for blacklist found. Blacklisting will not work therefore."
fi
else
- ewarn "Backlisting via bootoption does not work on harddisk installations." ; eend 1
+ ewarn "Backlisting via bootoption is not intended for use on harddisk installations." ; eend 1
eindent
- einfo "Please blacklist the module(s) via /etc/modprobe.d/blacklist."
+ einfo "Please blacklist the module(s) manually using the 'blacklist' script."
eoutdent
fi
fi
# }}}
# {{{ ACPI
-config_acpi_apm(){
-if [ -d /proc/acpi ]; then
- if checkbootparam "noacpi"; then
- ewarn "Skipping ACPI Bios detection as requested on boot commandline." ; eend 0
+config_acpi(){
+if checkbootparam 'noacpi'; then
+ ewarn "ACPI: Not loading modules as requested by boot option \"noacpi\"." ; eend 0
+elif checkbootparam 'nogrmlacpi' ; then
+ ewarn "ACPI: Not loading modules as requested by boot option \"nogrmlacpi\"." ; eend 0
+elif [ ! -d /proc/acpi ] ; then
+ ewarn "ACPI: Kernel support not present." ; eend 0
+else
+ einfo "ACPI: Loading modules (disable with boot option noacpi / nogrmlacpi): "
+ eindent
+ found=""
+ for a in /lib/modules/$KERNEL/kernel/drivers/acpi/*; do
+ basename="${a##*/}"
+ basename="${basename%%.*}"
+ case "$basename" in *_acpi)
+ egrep -qi "${basename%%_acpi}" /proc/acpi/dsdt 2>>$DEBUG || continue ;;
+ esac
+ modprobe $basename >>$DEBUG 2>&1 && found="yes"
+ local BASE="$BASE $basename"
+ done
+ if [ -n "$found" ] ; then
+ einfo "$BASE" ; eend 0
else
- einfo "ACPI Bios found, activating modules: "
- eindent
- found=""
- for a in /lib/modules/$KERNEL/kernel/drivers/acpi/*; do
- basename="${a##*/}"
- basename="${basename%%.*}"
- case "$basename" in *_acpi)
- egrep -qi "${basename%%_acpi}" /proc/acpi/dsdt 2>>$DEBUG || continue ;;
- esac
- modprobe $basename >>$DEBUG 2>&1 && found="yes"
- local BASE="$BASE $basename"
- done
- if [ -n "$found" ] ; then
- einfo "$BASE" ; eend 0
- else
- ewarn "(none)" ; eend 1
- fi
- if ! [ -S /var/run/acpid.socket ] ; then
- if ! [ -r /var/run/dbus/pid ] ; then
- einfo "Starting acpi daemon."
- /etc/init.d/acpid start >>$DEBUG ; eend $?
- else
- eerror "acpid error: it seems you are running d-bus/hal, but acpid needs to be started before d-bus."
- eerror "Solution: please activate acpid via /etc/runlevel.conf"
- eend 1
- fi
- else
- ewarn "acpi daemon already running."
- eend 0
- fi
- eoutdent
+ ewarn "(none)" ; eend 1
fi
-else
-# APM
- if checkbootparam "noapm"; then
- ewarn "Skipping APM Bios detection as requested on boot commandline." ; eend 0
+ if ! pgrep acpid >/dev/null ; then
+ einfo "Starting acpi daemon."
+ /etc/init.d/acpid start >>$DEBUG 2>&1 ; eend $?
else
- modprobe apm power_off=1 >>$DEBUG 2>&1
- if [ "$?" = "0" ] ; then
- if [ -x /etc/init.d/apmd ] ;then
- einfo "APM Bios found, enabling power management functions."
- /etc/init.d/apmd start ; eend $?
- fi
- else
- eerror "Loading apm module failed." ; eend 1
- fi
+ ewarn "acpi daemon already running."
+ eend 0
fi
+ eoutdent
fi
}
# }}}
-# {{{ PCMCIA Check/Setup
-# This needs to be done before other modules are being loaded (by hwsetup)
-config_pcmcia(){
-if checkbootparam "nopcmcia"; then
- ewarn "Skipping PCMCIA detection as requested on boot commandline." ; eend 0
-else
- if /usr/sbin/laptop-detect ; then
- einfo "Detected Laptop - checking for PCMCIA." && eend 0
- modprobe pcmcia_core >>$DEBUG 2>&1
- # Try Cardbus or normal PCMCIA socket drivers
- modprobe yenta_socket >>$DEBUG 2>&1 || modprobe i82365 >>$DEBUG 2>&1 || modprobe pd6729 >>$DEBUG 2>&1 || modprobe tcic >>$DEBUG 2>&1
- if [ "$?" = "0" ]; then
- modprobe ds >>$DEBUG 2>&1
- if [ -d /proc/bus/pccard ] ; then
- if [ -x /sbin/cardmgr ] ; then
- einfo "PCMCIA found, starting cardmgr."
- cardmgr >>$DEBUG 2>&1 && sleep 6 && eend 0
- else
- eerror "No cardmgr found. Make sure package pcmciautils is installed, it should handle it instead." ; eend 1
- fi
- fi
- fi
- fi
-fi
+# {{{ Collect partitions from /proc/partitions first for enabling DMA
+check_partitions(){
+partitions=""
+IDEDISKS=""
+while read major minor blocks partition relax; do
+ partition="${partition##*/}"
+ [ -z "$partition" -o ! -e "/dev/$partition" ] && continue
+ case "$partition" in
+ hd?) IDEDISKS="$IDEDISKS $partition";; # IDE Harddisk, entire disk
+ sd?) ;; # SCSI Harddisk, entire disk
+# [hs]d*) partitions="$partitions /dev/$partition";; # IDE or SCSI disk partition
+ [hs]d*|ub*) partitions="$partitions /dev/$partition";; # IDE, USB or SCSI disk partition
+ esac
+done <<EOT
+$(awk 'BEGIN{old="__start"}{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print $0}}}' /proc/partitions)
+EOT
}
+check_partitions >/dev/null 2>&1 # avoid output "check_partitions:3: read-only file system"
# }}}
-# {{{ run software synthesizer via speakup
-config_swspeak(){
-if checkbootparam swspeak ; then
- if [ -d /proc/speakup/ ] ; then
- einfo "Bootoption swspeak found. Kernel supports speakup." ; eend 0
- eindent
- if [ -x /etc/init.d/speech-dispatcher ] ; then
- einfo "Starting speech-dispatcher."
- /etc/init.d/speech-dispatcher start 1>>DEBUG ; eend $?
- einfo "Activating sftsyn in Kernel."
- echo sftsyn >/proc/speakup/synth_name ; eend $?
- einfo "Just run swspeak if you want to use software synthesizer via speakup."
- flite -o play -t "Finished activating software speakup. Just run swspeak when booting finished."
- else
- eerror "speech-dispatcher not available. swspeak will not work without it." ; eend 1
- flite -o play -t "speech-dispatcher not available. speakup will not work without it."
- fi
- eoutdent
- else
- eerror "Kernel does not seem to support speakup. Skipping swspeak." ; eend 1
- flite -o play -t "Kernel does not seem to support speakup. Sorry."
- fi
-fi
+# {{{ Start brltty
+config_brltty() {
+ if checkbootparam 'brltty' ; then
+ [ -x /lib/brltty/brltty.sh ] && /lib/brltty/brltty.sh
+ fi
}
# }}}
-# {{{ Check for blind option or brltty
-config_blind(){
-BLIND=""
-checkbootparam "blind" && BLIND="yes"
-BRLTTY="$(getbootparam brltty 2>>$DEBUG)"
-
-if [ -n "$BLIND" -o -n "$BRLTTY" ]; then
- if [ -x /sbin/brltty ]; then
- # Blind option detected, start brltty now.
- # modprobe serial_core parport_serial generic_serial && echo "done"
- CMD=brltty
- BRLTYPE=""
- BRLDEV=""
- BRLTEXT=""
- if [ -n "$BRLTTY" ]; then
- # Extra options
- BRLTYPE="${BRLTTY%%,*}"
- R="${BRLTTY#*,}"
- if [ -n "$R" -a "$R" != "$BRLTTY" ]; then
- BRLTTY="$R"
- BRLDEV="${BRLTTY%%,*}"
- R="${BRLTTY#*,}"
- if [ -n "$R" -a "$R" != "$BRLTTY" ]; then
- BRLTTY="$R"
- BRLTEXT="${BRLTTY%%,*}"
- R="${BRLTTY#*,}"
- fi
- fi
- fi
- [ -n "$BRLTYPE" ] && CMD="$CMD -b $BRLTYPE"
- [ -n "$BRLDEV" ] && CMD="$CMD -d $BRLDEV"
- [ -n "$BRLTEXT" ] && CMD="$CMD -t $BRLTEXT"
- einfo "Starting braille-display manager."
-# ( exec $CMD & )
- ( sh -c "$CMD" & )
- sleep 2 && BLINDSOUND="yes"
- eend 0
- fi
-fi
-}
-# }}}
-
-# {{{ Interactive configuration
-config_interactive(){
-if [ -n "$INTERACTIVE" ] ; then
-einfo "Entering interactive configuration second stage."
-
- echo " ${GREEN}Your console keyboard defaults to: ${MAGENTA}${KEYTABLE}"
- echo -n "${CYAN}Do you want to (re)configure your console keyboard?${NORMAL} [Y/n] "
- read a
- [ "$a" != "n" ] && /usr/sbin/dpkg-reconfigure console-data ; eend $?
-
- echo -n "${CYAN}Do you want to (re)configure your soundcard?${NORMAL} [Y/n] "
- read a
- [ "$a" != "n" ] && alsaconf && ( exec aumix -m 0 >>$DEBUG 2>&1 & ) ; eend $?
-
- echo -n "${CYAN}Do you want to (re)configure your graphics (X11) subsystem?${NORMAL} [Y/n] "
- read a
- [ "$a" != "n" ] && xorgcfg -textmode ; eend $?
- echo " ${GREEN}Interactive configuration finished. Everything else should be fine for now.${NORMAL}"
-fi
-eend 0
-}
-# }}}
-
-# {{{ AGP
-config_agp(){
-if checkbootparam forceagp ; then
-# Probe for AGP. Hope this can fail safely
- stringinfile "AGP" "/proc/pci" 2>>$DEBUG && { modprobe agpgart || modprobe agpgart agp_try_unsupported=1; } >>$DEBUG 2>&1 && einfo "AGP bridge detected." ; eend 0
-fi
-}
-# }}}
-
-# {{{ automount(er)
-config_automounter(){
-if checkbootparam automounter ; then
- RUNLEVEL="$(runlevel)"
- AUTOMOUNTER=""
- [ -x /etc/init.d/autofs ] && [ "$RUNLEVEL" != "N 1" ] && [ "$RUNLEVEL" != "N S" ] && AUTOMOUNTER="yes"
-
-addautomount(){
-# /dev/ice options
- d="${1##*/}"
- if [ -n "$AUTOMOUNTER" ]; then
- [ -d "/mnt/$d" -a ! -L "/mnt/$d" ] && rmdir /mnt/$d
- [ -d "/mnt/auto/$d" ] || mkdir -p "/mnt/auto/$d"
- [ -L "/mnt/$d" ] || ln -s "/mnt/auto/$d" "/mnt/$d"
- anew="$d -fstype=auto,$2 :$i"
- stringinfile "$anew" "/etc/auto.mnt" || echo "$anew" >> /etc/auto.mnt
- AUTOMOUNTS="$AUTOMOUNTS $d"
- new="$1 /mnt/auto/$d auto users,noauto,exec,$2 0 0"
- else
- [ -d /mnt/$d ] && mkdir -p /mnt/$d
- new="$1 /mnt/$d auto users,noauto,exec,$2 0 0"
- fi
- stringinfile "$new" "/etc/fstab" || echo "$new" >> /etc/fstab
-}
-
- AUTOMOUNTS="floppy cdrom"
-# Add new devices to /etc/fstab and /etc/auto.mnt
- for i in /dev/cdrom?*; do
- if [ -L $i ]; then
- addautomount "$i" "ro"
- fi
- done
-fi
-
-if [ -n "$AUTOMOUNTER" ]; then
-# Check for floppy dir, reinstall with automounter
- [ -d /mnt/floppy -a ! -L /mnt/floppy ] && rmdir /mnt/floppy
- [ -d /mnt/auto/floppy ] || mkdir -p /mnt/auto/floppy
- [ -L /mnt/floppy ] || ln -s /mnt/auto/floppy /mnt/floppy
- [ -d /mnt/cdrom -a ! -L /mnt/cdrom ] && rmdir /mnt/cdrom
- [ -d /mnt/auto/cdrom ] || mkdir -p /mnt/auto/cdrom
- [ -L /mnt/cdrom ] || ln -s /mnt/auto/cdrom /mnt/cdrom
- rm -f /etc/fstab.new
-# Replace paths from bootfloppy
- sed 's|/mnt/cdrom|/mnt/auto/cdrom|g;s|/mnt/floppy|/mnt/auto/floppy|g' /etc/fstab > /etc/fstab.new
- mv -f /etc/fstab.new /etc/fstab
-# Start automounter now
- einfo "Starting automounter for ${AUTOMOUNTS}."
- /etc/init.d/autofs start >>$DEBUG ; eend $?
-fi
-}
-# }}}
-
-# {{{ Collect partitions from /proc/partitions first for enabling DMA
-check_partitions(){
-partitions=""
-IDEDISKS=""
-while read major minor blocks partition relax; do
- partition="${partition##*/}"
- [ -z "$partition" -o ! -e "/dev/$partition" ] && continue
- case "$partition" in
- hd?) IDEDISKS="$IDEDISKS $partition";; # IDE Harddisk, entire disk
- sd?) ;; # SCSI Harddisk, entire disk
-# [hs]d*) partitions="$partitions /dev/$partition";; # IDE or SCSI disk partition
- [hs]d*|ub*) partitions="$partitions /dev/$partition";; # IDE, USB or SCSI disk partition
- esac
-done <<EOT
-$(awk 'BEGIN{old="__start"}{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print $0}}}' /proc/partitions)
-EOT
-}
-check_partitions 1>/dev/null 2>&1 # avoid output "check_partitions:3: read-only file system"
-# }}}
-
# {{{ Enable DMA for all IDE drives now if not disabled
-# Notice: Already done by linuxrc, maybe not on hd-installations
+# Notice: Already done by linuxrc, but make sure it's done also on harddisk-installed systems
config_dma(){
-if checkbootparam "nodma"; then
+if checkbootparam 'nodma'; then
ewarn "Skipping DMA accelleration as requested on boot commandline." ; eend 0
else
for d in $(cd /proc/ide 2>>$DEBUG && echo hd[a-z]); do
# {{{ Start creating /etc/fstab with HD partitions and USB SCSI devices now
config_fstab(){
-NOSWAP=""
-checkbootparam "noswap" && NOSWAP="yes"
-if checkbootparam "nofstab"; then
- ewarn "Skipping /etc/fstab creation as requested on boot commandline." ; eend 0
-else
- checkbootparam "anyswap" && export ANYSWAP='yes' || export ANYSWAP=""
- einfo "Scanning for harddisk partitions and creating /etc/fstab. (Disable this via boot option: nofstab)"
- iszsh && setopt nonomatch
- if [ -x /usr/sbin/rebuildfstab ] ; then
- config_userfstab || fstabuser=grml
- /usr/sbin/rebuildfstab -r -u $fstabuser -g $fstabuser ; eend $?
- else
- ewarn "Command rebuildfstab not found. Install package grml-rebuildfstab." ; eend 1
- fi
- if [ -e /var/run/rebuildfstab.pid ]; then
- # Another instance of rebuildfstab, probably from hotplug, is still running, so just wait.
- sleep 8
- fi
-fi
-# Scan for swap, config, homedir
-if [ -z "$NOSWAP" -o -z "$INSTALLED" ]; then
- einfo "Checking for swap partition(s)."
+
+NOSWAP="yes" # we do not use swap by default!
+if checkbootparam 'swap' || checkbootparam 'anyswap' ; then
+ NOSWAP=''
+ checkbootparam 'anyswap' && export ANYSWAP='yes' || export ANYSWAP=""
fi
-GRML_IMG=""
-GRML_SWP=""
-HOMEDIR="$(getbootparam home)"
-if [ -n "$partitions" ]; then
- while read p m f relax; do
- case "$p" in *fd0*|*proc*|*sys*|*\#*) continue;; esac
- partoptions="users,exec"
- fnew=""
- case "$f" in swap)
- eindent
- if [ -n "$NOSWAP" ]; then
- ewarn "Ignoring swap partition ${WHITE}$p${NORMAL} as requested." ; eend 0
- else
- case "$(dd if=$p bs=1 count=6 skip=4086 2>/dev/null)" in
- S1SUSP|S2SUSP|pmdisk|[zZ]*)
- if [ -n "$ANYSWAP" ] ; then
- einfo "Using swap partition ${WHITE}${p}${NORMAL} [bootoption anyswap found]."
- swapon $p 2>>$DEBUG ; eend $?
- else
- ewarn "Suspend signature on ${WHITE}${p}${NORMAL} found, not using as swap. (Force usage via boot option: anyswap)"
- fi
- ;;
- *)
- if [[ "$p" == LABEL* ]] ; then
- p=$(blkid -t $p | awk -F: '{print $1}')
- fi
- if grep -q $p /proc/swaps ; then
- ewarn "Not using swap partition ${WHITE}${p}${NORMAL} as it is already in use." ; eend 0
- else
- einfo "Using swap partition ${WHITE}${p}${NORMAL}."
- swapon $p 2>>$DEBUG ; eend $?
- fi
- ;;
- esac
- fi
- eoutdent
- continue
- ;;
- esac
-# Create mountdir if not already present, but don't try to create stuff like /proc/bus/usb
-# Notice: grml-rebuildfstab >= 0.3-1 handles this now
-# case "$m" in *none*|*proc*|*sys*|'') continue ;; esac
-# [ -d "$m" ] || mkdir -p "$m"
-# WARNING: NTFS RW mounts are only safe since Kernel 2.6.11
- [ "$f" = "ntfs" -a "${KERNEL%.*}" != "2.6" ] && continue
- MOUNTOPTS="ro"
- case "$f" in
- vfat|msdos|ntfs) MOUNTOPTS="$MOUNTOPTS,uid=${fstabuser},gid=${fstabuser}" ;;
- ext2|ext3|reiserfs|jfs|reiser4|xfs) MOUNTOPTS="$MOUNTOPTS,noatime" ;;
- *) continue ;;
- # *) NONEFOUND='1'; continue ;;
- esac
- mount -o "$MOUNTOPTS" -t $f $p $m 2>>$DEBUG || continue
- # Activate swapfile, if exists
- SWAPFILE="$(/bin/ls -1d $m/[Gg][Rr][Mm][Ll].[Ss][Ww][Pp] 2>/dev/null)"
- if [ -z "$NOSWAP" -a -n "$SWAPFILE" -a -f "$SWAPFILE" ]; then
- mount -o remount,rw $m
- if swapon "$SWAPFILE" 2>>$DEBUG ; then
- einfo "Using GRML swapfile ${SWAPFILE}."
- fnew="$SWAPFILE swap swap defaults 0 0"
- stringinfile "$fnew" "/etc/fstab" || echo "$fnew" >> /etc/fstab
- GRML_SWP="$GRML_SWP $SWAPFILE"
- eend 0
- fi
- mount -o remount,ro $m 2>>$DEBUG
- fi
- IMAGE="$(/bin/ls -1d $m/[Gg][Rr][Mm][Ll].[Ii][Mm][Gg] 2>/dev/null)"
- if [ -z "$INSTALLED" -a -z "$GRML_IMG" -a -n "$IMAGE" -a -f "$IMAGE" ]; then
- if [ -n "$HOMEDIR" ]; then
- if [ "$HOMEDIR" != "scan" -a "$HOMEDIR" != "$IMAGE" -a "$HOMEDIR" != "${IMAGE%/*.*}" ]; then
- continue
- fi
- fi
- if type -a grml-image >/dev/null 2>&1 && grml-image "$IMAGE" </dev/console >/dev/console 2>&1; then
- GRML_IMG="$IMAGE"
- mount -o remount,ro $m 2>>$DEBUG
- fi
- fi
- eend 0
- # Umount, if not in use
- umount -r $m 2>/dev/null
- done <<EOT
-$(cat /etc/fstab)
+
+# Scan for swap, config, homedir - but only in live-mode
+if [ -z "$INSTALLED" ] ; then
+ [ -z "$NOSWAP" ] && einfo "Searching for swap partition(s) as requested."
+ GRML_IMG=""
+ GRML_SWP=""
+ HOMEDIR="$(getbootparam 'home')"
+ if [ -n "$partitions" ]; then
+ while read p m f relax; do
+ case "$p" in *fd0*|*proc*|*sys*|*\#*) continue;; esac
+ partoptions="users,exec"
+ fnew=""
+ # it's a swap partition?
+ case "$f" in swap)
+ eindent
+ if [ -n "$NOSWAP" ]; then
+ ewarn "Ignoring swap partition ${WHITE}$p${NORMAL}. (Force usage via boot option 'swap', or execute grml-swapon)"
+ eend 0
+ else
+ case "$(dd if=$p bs=1 count=6 skip=4086 2>/dev/null)" in
+ S1SUSP|S2SUSP|pmdisk|[zZ]*)
+ if [ -n "$ANYSWAP" ] ; then
+ einfo "Using swap partition ${WHITE}${p}${NORMAL} [bootoption anyswap found]."
+ swapon $p 2>>$DEBUG ; eend $?
+ else
+ ewarn "Suspend signature on ${WHITE}${p}${NORMAL} found, not using as swap. (Force usage via boot option: anyswap)"
+ fi
+ ;;
+ *)
+ if [[ "$p" == LABEL* ]] ; then
+ p=$(blkid -t $p | awk -F: '{print $1}')
+ fi
+ if grep -q $p /proc/swaps ; then
+ ewarn "Not using swap partition ${WHITE}${p}${NORMAL} as it is already in use." ; eend 0
+ else
+ if [ -b "$p" ] ; then
+ einfo "Using swap partition ${WHITE}${p}${NORMAL}."
+ swapon $p 2>>$DEBUG ; eend $?
+ else
+ ewarn "$p is not a valid block device - not using it therefore." ; eend 0
+ fi
+ fi
+ ;;
+ esac # dd-check
+ fi # -n "$NOSWAP
+ eoutdent
+ continue
+ ;;
+ esac # it's a swap partition?
+
+ # mount read-only
+ MOUNTOPTS="ro"
+ case "$f" in
+ vfat|msdos|ntfs) MOUNTOPTS="$MOUNTOPTS,uid=${fstabuser},gid=${fstabuser}" ;;
+ ext2|ext3|reiserfs|jfs|reiser4|xfs) MOUNTOPTS="$MOUNTOPTS,noatime" ;;
+ *) continue ;;
+ # *) NONEFOUND='1'; continue ;;
+ esac
+
+ # use a swapfile
+ if [ -z "$NOSWAP" ] ; then
+ mount -o "$MOUNTOPTS" -t $f $p $m 2>>$DEBUG && MOUNTED=1 || continue
+ # Activate swapfile, if exists
+ SWAPFILE="$(/bin/ls -1d $m/[Gg][Rr][Mm][Ll].[Ss][Ww][Pp] 2>/dev/null)"
+ fi
+ if [ -z "$NOSWAP" -a -n "$SWAPFILE" -a -f "$SWAPFILE" ]; then
+ mount -o remount,rw $m && MOUNTED=1
+ if swapon "$SWAPFILE" 2>>$DEBUG ; then
+ eindent
+ einfo "Using GRML swapfile ${WHITE}${SWAPFILE}${NORMAL}."
+ eoutdent
+ fnew="$SWAPFILE swap swap defaults 0 0"
+ grep -q "$fnew" "/etc/fstab" || echo "$fnew" >> /etc/fstab
+ GRML_SWP="$GRML_SWP $SWAPFILE"
+ eend 0
+ fi
+ mount -o remount,ro $m 2>>$DEBUG && MOUNTED=1
+ fi
+
+ # use a image as home
+ IMAGE="$(/bin/ls -1d $m/[Gg][Rr][Mm][Ll].[Ii][Mm][Gg] 2>/dev/null)"
+ if [ -z "$GRML_IMG" -a -n "$IMAGE" -a -f "$IMAGE" ]; then
+ if [ -n "$HOMEDIR" ]; then
+ if [ "$HOMEDIR" != "scan" -a "$HOMEDIR" != "$IMAGE" -a "$HOMEDIR" != "${IMAGE%/*.*}" ]; then
+ continue
+ fi
+ fi
+ if type -a grml-image >/dev/null 2>&1 && grml-image "$IMAGE" </dev/console >/dev/console 2>&1; then
+ GRML_IMG="$IMAGE"
+ mount -o remount,ro $m 2>>$DEBUG && MOUNTED=1
+ fi
+ fi
+ eend 0
+
+ # Umount, if not in use
+ [ -n "$MOUNTED" ] && umount -r $m 2>/dev/null
+
+ done <<EOT
+ $(cat /etc/fstab)
EOT
-fi
+ fi # -n $partitions
+fi # -z $INSTALLED
}
# }}}
# {{{ IPv6 configuration
# Load IPv6 kernel module and print IP adresses
config_ipv6(){
-if checkbootparam "ipv6"; then
+if checkbootparam 'ipv6'; then
einfo "Enabling IPv6 as requested on boot commandline (sleeping for 2 seconds)"
modprobe ipv6
# we probably need some time until stateless autoconfiguration has happened
sleep 2
NETDEVICES="$(awk -F: '/eth.:|tr.:|wlan.:/{print $1}' /proc/net/dev 2>>$DEBUG)"
- for DEVICE in `echo "$NETDEVICES"`
- do
- eindent
- einfo "$DEVICE:"
- ADDRESSES="$(ifconfig $DEVICE | awk '/.*inet6 addr:.*/{print $3}')"
- COUNT="$(ifconfig $DEVICE | awk '/.*inet6 addr:.*/{ sum += 1};END {print sum }')"
+ for DEVICE in `echo "$NETDEVICES"`; do
eindent
- for ADDR in `echo "$ADDRESSES"`
- do
- einfo "$ADDR"
- done
- if [ "$COUNT" -eq "0" ]
- then
- einfo "(none)" ; eend 1
- fi
- eoutdent
+ einfo "$DEVICE:"
+ ADDRESSES="$(ifconfig $DEVICE | awk '/.*inet6 addr:.*/{print $3}')"
+ COUNT="$(ifconfig $DEVICE | awk '/.*inet6 addr:.*/{ sum += 1};END {print sum }')"
+ eindent
+ for ADDR in `echo "$ADDRESSES"` ; do
+ einfo "$ADDR"
+ done
+ if [ "$COUNT" -eq "0" ] ; then
+ einfo "(none)" ; eend 1
+ fi
+ eoutdent
eoutdent
done
eend 0
}
# }}}
-# {{{ Fat-Client-Version: DHCP Broadcast for IP address
-config_dhcp(){
-if checkbootparam "nodhcp"; then
- ewarn "Skipping DHCP broadcast/network detection as requested on boot commandline." ; eend 0
-else
- NETDEVICES="$(awk -F: '/eth.:|tr.:|wlan.:/{print $1}' /proc/net/dev 2>>$DEBUG)"
- rm -rf /etc/network/status ; mkdir -p /etc/network/status
- for DEVICE in `echo "$NETDEVICES"` ; do
- einfo "Network device ${WHITE}${DEVICE}${NORMAL} detected, DHCP broadcasting for IP. (Backgrounding)"
- trap 2 3 11
- ifconfig $DEVICE up >>$DEBUG 2>&1
- ( pump -i $DEVICE >>$DEBUG 2>&1 && echo finished_running_pump > /etc/network/status/$DEVICE ) &
- trap "" 2 3 11
- sleep 1
- eend 0
- done
-fi
-}
-# }}}
-
-# {{{ helper functions
-findfile(){
-FOUND=""
-# search all partitions for a file in the root directory
-for i in /mnt/[sh]d[a-z] /mnt/[sh]d[a-z][1-9] /mnt/[sh]d[a-z][1-9]?*; do
-# See if it's already mounted
- [ -f "$i/$1" ] && { echo "$i/$1"; return 0; }
- if [ -d "$i" ] && mount -r "$i" 2>>$DEBUG; then
- [ -f "$i/$1" ] && FOUND="$i/$1"
- umount -l "$i" 2>>$DEBUG
- [ -n "$FOUND" ] && { echo "$FOUND"; return 0; }
- fi
-done
-return 2
-}
-
-fstype(){
-case "$(file -s $1)" in
- *[Ff][Aa][Tt]*|*[Xx]86*) echo "vfat"; return 0;;
- *[Rr][Ee][Ii][Ss][Ee][Rr]*) echo "reiserfs"; return 0;;
- *[Xx][Ff][Ss]*) echo "xfs"; return 0;;
- *[Ee][Xx][Tt]3*) echo "ext3"; return 0;;
- *[Ee][Xx][Tt]2*) echo "ext2"; return 0;;
- *data*) echo "invalid"; return 0;;
- *) echo "auto"; return 0;;
-esac
-}
-
-# Try to mount this filesystem read-only, without or with encryption
-trymount(){
-# Check if already mounted
-case "$(cat /proc/mounts)" in *\ $2\ *) return 0;; esac
-# Apparently, mount-aes DOES autodetect AES loopback files.
-[ -b "$1" ] && { mount -t auto -o ro "$1" "$2" 2>>$DEBUG; RC="$?"; }
-# We need to mount crypto-loop files with initial rw support
-[ -f "$1" ] && { mount -t auto -o loop,rw "$1" "$2" 2>>$DEBUG; RC="$?"; }
-# Mount succeeded?
-[ "$RC" = "0" ] && return 0
-echo ""
-einfo "Filesystem not autodetected, trying to mount $1 with AES256 encryption."
-a="y"
-while [ "$a" != "n" -a "$a" != "N" ]; do
-# We need to mount crypto-loop files with initial rw support
- mount -t auto -o loop,rw,encryption=AES256 "$1" "$2" && return 0
- echo -n "${RED}Mount failed, retry? [Y/n] ${NORMAL}"
- # Problem with ioctl() from getpasswd()?
- # read a
- read a
-done
-return 1
-}
-# }}}
-
# {{{ CPU-detection
config_cpu(){
-if checkbootparam "nocpu"; then
+if checkbootparam 'nocpu'; then
ewarn "Skipping CPU detection as requested on boot commandline." ; eend 0
+ return 0
+fi
+
+if [[ $(grep -c processor /proc/cpuinfo) -gt 1 ]] ; then
+ einfo "Found CPU:"
+ CPU=$(awk -F: '/^processor/{printf " Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>>$DEBUG)
+ echo $CPU | sed 's/ \{1,\}/ /g'
+ eend 0
else
- if ! [ -x /etc/init.d/powernowd ] ; then
- ewarn "Skipping CPU detection as powernowd dependencies are not fulfilled." ; eend 1
- elif [ ! -e /lib/modules/${KERNEL}/kernel/arch/i386/kernel/cpu/cpufreq -o ! -e /lib/modules/${KERNEL}/kernel/drivers/cpufreq ] ; then
- ewarn "Skipping CPU detection as module dependencies are not fulfilled." ; eend 1
- else
- if [[ `grep -c processor /proc/cpuinfo` -gt 1 ]] ; then
- einfo "Detecting CPU:"
- CPU=$(awk -F: '/^processor/{printf " Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>>$DEBUG)
- echo $CPU | sed 's/ \{1,\}/ /g'
- eend 0
- else
- einfo "Detecting CPU: `awk -F: '/^processor/{printf " Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>>$DEBUG` " ; eend 0
- fi
- if /usr/sbin/laptop-detect ; then
- einfo "Detected Laptop - trying to use cpu frequency scaling:"
-# loadcpumod() {
-# for module in /lib/modules/${KERNEL}/kernel/arch/i386/kernel/cpu/cpufreq/*.ko /lib/modules/${KERNEL}/kernel/drivers/cpufreq/*.ko ; do
-# # modprobe ${${${${(f)"$(_call_program modules ${(M)words[1]##*/}modprobe -l | grep cpufreq 2>>$DEBUG)"}:#}##*/}%.*}
-# modprobe `basename ${module%%\.ko}` 1>>$DEBUG 2>&1
-# done
-# }
-# CPU=$(grep 'model name' /proc/cpuinfo | cut -b14- | head -1)
-# eindent
-# if [[ $CPU = *Intel* ]] ; then
-# einfo "Detected CPU is of type Intel - loading modules and starting cpudyn."
-# local DETECTED=1
-# loadcpumod
-# /etc/init.d/cpudyn start 1>>$DEBUG ; eend $?
-# fi
-# if [[ $CPU = *AMD* ]] ; then
-# einfo "Detected CPU is of type AMD - loading modules and starting powernowd."
-# local DETECTED=1
-# loadcpumod
-# /etc/init.d/powernowd start 1>>$DEBUG ; eend $?
-# fi
-
- eindent
- if [ -r /usr/bin/cpufreq-detect.sh ] ; then
- . /usr/bin/cpufreq-detect.sh
- if [ -n "$MODULE" -a "$MODULE" != none ]; then
- einfo "Loading module ${MODULE} and starting powernowd."
- modprobe cpufreq_userspace 1>>$DEBUG
- modprobe "$MODULE" 1>>$DEBUG || modprobe "$MODULE_FALLBACK" 1>>$DEBUG
- /etc/init.d/powernowd start 1>>$DEBUG ; eend $?
- else
- ewarn "Could not detect an appropriate CPU for use with powernowd - skipping." && eend 1
- fi
- fi
- eoutdent
+ einfo "Found CPU: `awk -F: '/^processor/{printf " Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>>$DEBUG` " ; eend 0
+fi
+
+# no cpufreq setup inside VirtualBox
+if $VIRTUALBOX ; then
+ einfo 'Virtual Box detected, skipping cpufreq setup.' ; eend 0
+ return 0
+fi
+
+if [ -x /etc/init.d/loadcpufreq ] ; then
+ einfo "Trying to set up cpu frequency scaling:"
+ eindent
+ SKIP_CPU_GOVERNOR=''
+ LOADCPUFREQ=$(mktemp)
+ /etc/init.d/loadcpufreq start >"$LOADCPUFREQ" 2>&1 ; RC=$?
+ if grep -q FATAL "$LOADCPUFREQ" ; then
+ eindent
+ SKIP_CPU_GOVERNOR=1
+ oldIFS="$IFS"
+ IFS="
+"
+ for line in $(grep FATAL "$LOADCPUFREQ" | sed 's/.*FATAL: //; s/ (.*)//') ; do
+ eerror "$line" ; eend $RC
+ done
+ IFS="$oldIFS"
+ eoutdent
+ elif grep -q done "$LOADCPUFREQ" ; then
+ MODULE=$(grep done "$LOADCPUFREQ" | sed 's/.*done (\(.*\))./\1/')
+ if [ -n "$MODULE" -a "$MODULE" != none ]; then
+ einfo "Loading cpufreq kernel module $MODULE" ; eend 0
+ else
+ SKIP_CPU_GOVERNOR=1
+ ewarn "Could not find an appropriate kernel module for cpu frequency scaling." ; eend 1
+ fi
fi
- fi
+
+ rm -f $LOADCPUFREQ
+
+ if [ -z "$SKIP_CPU_GOVERNOR" ] ; then
+ if grep -vq ondemand /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors; then
+ einfo "Loading cpufreq_ondemand"
+ modprobe cpufreq_ondemand
+ eend $?
+ fi
+
+ einfo "Setting ondemand governor"
+ RC=0
+ for file in $(find /sys/devices/system/cpu/ -name scaling_governor 2>/dev/null) ; do
+ echo ondemand > $file || RC=1
+ done
+ eend $RC
+ fi # cpu-governor
+
+ eoutdent
fi
}
# }}}
# {{{ autostart of ssh
config_ssh(){
-if checkbootparam ssh ; then
- SSH_PASSWD="$(getbootparam 'ssh' 2>>$DEBUG)"
- einfo "Bootoption passwd found."
- if [ -n "$SSH_PASSWD" ] ; then
- echo "grml:$SSH_PASSWD" | chpasswd -m
- einfo "Starting secure shell server in background."
- /etc/init.d/rmnologin start 1>>$DEBUG 2>>$DEBUG
- /etc/init.d/ssh start 1>>$DEBUG 2>>$DEBUG &
- eend 0
- else
- eerror "No given password for ssh found. Autostart of SSH will not work." ; eend 1
- fi
- eindent
- ewarn "Warning: please change the password for user grml set via bootparameter as soon as possible!"
- eoutdent
-fi
-}
-# }}}
+if checkbootparam 'ssh' ; then
+ SSH_PASSWD=''
+ SSH_PASSWD="$(getbootparam 'ssh' 2>>$DEBUG)"
+ config_userlocal
+ einfo "Bootoption ssh found, trying to set password for root and user $localuser"
+ [ -z "$localuser" ] && eend 1
+ eindent
+ if [ -z "$SSH_PASSWD" ] ; then
+ if [ -x /usr/bin/apg ] ; then
+ SSH_PASSWD="$(apg -M NL -a 0 -m 8 -x 12 -n 1)"
+ elif [ -x /usr/bin/gpw ] ; then
+ SSH_PASSWD="$(gpw 1)"
+ elif [ -x /usr/bin/pwgen ] ; then
+ SSH_PASSWD="$(pwgen -1 8)"
+ elif [ -x /usr/bin/hexdump ] ; then
+ SSH_PASSWD="$(dd if=/dev/urandom bs=14 count=1 2>/dev/null | hexdump | awk '{print $3 $4}')"
+ elif [ -n "$RANDOM" ] ; then
+ SSH_PASSWD="grml${RANDOM}"
+ else
+ SSH_PASSWD=''
+ eerror "Empty passphrase and neither pwgen nor hexdump nor \$RANDOM found. Skipping."
+ eend 1
+ fi
-# {{{ set password for user grml
-config_passwd(){
-if checkbootparam passwd >>$DEBUG 2>&1; then
- einfo "Bootoption passwd found."
- PASSWD="$(getbootparam 'passwd' 2>>$DEBUG)"
- if [ -n "$PASSWD" ] ; then
- echo "grml:$PASSWD" | chpasswd -m ; eend $?
- else
- eerror "No given password for ssh found. Autostart of SSH will not work." ; eend 1
- fi
- eindent
- ewarn "Warning: please change the password for user grml set via bootparameter as soon as possible!"
- eoutdent
+ if [ -n "$SSH_PASSWD" ] ; then
+ ewarn "No given password for ssh found. Using random password: $SSH_PASSWD" ; eend 0
+ fi
+ fi
+ eoutdent
+
+ # finally check if we have a password we can use:
+ if [ -n "$SSH_PASSWD" ] ; then
+ # chpasswd sucks, seriously.
+ chpass_options=""
+ if chpasswd --help 2>&1 | grep -q -- '-m,' ; then
+ chpass_options="-m"
+ fi
+ echo "$localuser:$SSH_PASSWD" | chpasswd $chpass_options
+ echo "root:$SSH_PASSWD" | chpasswd $chpass_options
+ fi
+
+ einfo "Starting secure shell server in background for root and user $localuser"
+ /etc/init.d/rmnologin start >>$DEBUG 2>>$DEBUG
+ /etc/init.d/ssh start >>$DEBUG 2>>$DEBUG &
+ eend $?
+
+ eindent
+ ewarn "Warning: please change the password for root and user $localuser as soon as possible!"
+ eoutdent
fi
}
# }}}
-# {{{ Check for persistent homedir option and eventually mount /home from there, or use a loopback file.
-config_homedir(){
-HOMEDIR="$(getbootparam home)"
-MYHOMEDEVICE=""
-MYHOMEMOUNTPOINT=""
-MYHOMEDIR=""
-if [ -n "$HOMEDIR" ]; then
- einfo "Bootoption home detected." && eend 0
- case "$HOMEDIR" in
- /dev/*)
- MYHOMEDEVICE="${HOMEDIR##/dev/}"
- MYHOMEDEVICE="/dev/${MYHOMEDEVICE%%/*}"
- MYHOMEMOUNTPOINT="/mnt/${MYHOMEDEVICE##/dev/}"
- MYHOMEDIR="/mnt/${HOMEDIR##/dev/}"
- ;;
- /mnt/*)
- MYHOMEDEVICE="${HOMEDIR##/mnt/}"
- MYHOMEDEVICE="/dev/${MYHOMEDEVICE%%/*}"
- MYHOMEMOUNTPOINT="/mnt/${MYHOMEDEVICE##/dev/}"
- MYHOMEDIR="$HOMEDIR"
- ;;
- [Aa][Uu][Tt][Oo]|[Ss][Cc][Aa][Nn]|[Ff][Ii][Nn][Dd])
- MYHOMEDIR="$(findfile grml.img)"
- MYHOMEDEVICE="${MYHOMEDIR##/mnt/}"
- MYHOMEDEVICE="/dev/${MYHOMEDEVICE%%/*}"
- MYHOMEMOUNTPOINT="/mnt/${MYHOMEDEVICE##/dev/}"
- ;;
- *)
- eerror "Invalid home= option '$HOMEDIR' specified (must start with /dev/ or /mnt/ or 'scan')." ; eend 1
- eerror "Option ignored." ; eend 1
- ;;
- esac
-fi
+# {{{ autostart of x11vnc
+config_vnc(){
+if checkbootparam 'vnc' ; then
+ config_userlocal
+ VNC_PASSWD=''
+ VNC_PASSWD="$(getbootparam 'vnc' 2>>$DEBUG)"
+ einfo "Bootoption vnc found, trying to set password for user $localuser."
+ eindent
+ if [ -z "$VNC_PASSWD" ] ; then
+ if [ -x /usr/bin/apg ] ; then
+ VNC_PASSWD="$(apg -M NL -a 0 -m 8 -x 12 -n 1)"
+ elif [ -x /usr/bin/gpw ] ; then
+ VNC_PASSWD="$(gpw 1)"
+ elif [ -x /usr/bin/pwgen ] ; then
+ VNC_PASSWD="$(pwgen -1 8)"
+ elif [ -x /usr/bin/hexdump ] ; then
+ VNC_PASSWD="$(dd if=/dev/urandom bs=14 count=1 2>/dev/null | hexdump | awk '{print $3 $4}')"
+ elif [ -n "$RANDOM" ] ; then
+ VNC_PASSWD="${localuser}${RANDOM}"
+ else
+ VNC_PASSWD=''
+ eerror "Empty passphrase and neither pwgen nor hexdump nor \$RANDOM found. Skipping."
+ eend 1
+ fi
-if [ -n "$MYHOMEDIR" ]; then
- if trymount "$MYHOMEDEVICE" "$MYHOMEMOUNTPOINT"; then
- [ -f "$MYHOMEMOUNTPOINT/grml.img" ] && MYHOMEDIR="$MYHOMEMOUNTPOINT/grml.img"
- while read device mountpoint fs relax; do
- case "$mountpoint" in *$MYHOMEMOUNTPOINT*)
- case "$fs" in *[Nn][Tt][Ff][Ss]*)
- umount "$MYHOMEMOUNTPOINT"; eerror "Error: will not mount NTFS filesystem on $MYHOMEDEVICE read/write!" ; eend 1
- break
- ;;
- *[Ff][Aa][Tt]*)
- # Note: This currently won't work with encrypted partitions
- umount "$MYHOMEMOUNTPOINT"; mount -t vfat -o rw,uid=grml,gid=grml,umask=002 "$MYHOMEDEVICE" "$MYHOMEMOUNTPOINT"
- if [ ! -f "$MYHOMEDIR" ]; then
- ewarn "WARNING: FAT32 is not a good filesystem option for /home/grml (missing socket/symlink support)."
- ewarn "WARNING: Better use an ext2 loopback file on this device, and boot with home=$MYHOMEDEVICE/grml.img."
- fi
- ;;
- esac
- if mount -o remount,rw "$MYHOMEMOUNTPOINT"; then
- einfo "Mounting ${WHITE}$MYHOMEDIR${NORMAL} as ${WHITE}/home/grml${NORMAL}."
- if [ -f "$MYHOMEDIR" ]; then
- # It's a loopback file, mount it over the /home/grml directory
- trymount "$MYHOMEDIR" /home/grml
- RC="$?"
- [ "$RC" = "0" ] && ERROR="$(mount -o remount,rw /home/grml 2>&1)"
- RC="$?"
- else
- # Do a --bind mount
- ERROR="$(mount --bind "$MYHOMEDIR" /home/grml 2>&1)"
- RC="$?"
- fi
- [ "$RC" = "0" ] && eend 0 || ( eerror "${ERROR}" ; eend 1 )
+ if [ -n "$VNC_PASSWD" ] ; then
+ ewarn "No given password for vnc found. Using random password: $VNC_PASSWD" ; eend 0
fi
- break
- ;;
- esac
- done <<EOT
-$(cat /proc/mounts)
-EOT
- fi
-fi
-}
-# }}}
+ fi
+ eoutdent
-# {{{ Check if we want the config floppy
-config_old_myconfig(){
-MYCONF=""
-case "$CMDLINE" in *\ myconfig*) MYCONF="yes"; ;; esac
-if [ -n "$MYCONF" ]; then
- einfo "Bootoption myconfig detected." && eend 0
-# Check for given config directory
- MYCONFDIR="$(getbootparam 'myconfig')"
- [ -n "$MYCONFDIR" ] || MYCONFDIR="$(getbootparam 'myconfig')"
-fi
+ # finally check if we have a password we can use:
+ if [ -n "$VNC_PASSWD" ] ; then
-# Check for configuration floppy add-on if not running from HD
-if [ -z "$INSTALLED" -a -n "$MYCONF" ]; then
- FOUND_CONFIG=""
- if [ -n "$MYCONFDIR" ]; then
- case "$MYCONFDIR" in
- /dev/*)
- MYCONFDEVICE="${MYCONFDIR##/dev/}"
- MYCONFDEVICE="/dev/${MYCONFDEVICE%%/*}"
- MYCONFMOUNTPOINT="/mnt/${MYCONFDEVICE##/dev/}"
- MYCONFDIR="/mnt/${MYCONFDIR##/dev/}"
- ;;
- /mnt/*)
- MYCONFDEVICE="${MYCONFDIR##/mnt/}"
- MYCONFDEVICE="/dev/${MYCONFDEVICE%%/*}"
- MYCONFMOUNTPOINT="/mnt/${MYCONFDEVICE##/dev/}"
- ;;
- [Aa][Uu][Tt][Oo]|[Ss][Cc][Aa][Nn]|[Ff][Ii][Nn][Dd])
- MYCONFDIR="$(findfile grml.sh)"
- if [ -n "$MYCONFDIR" ]; then
- MYCONFDEVICE="${MYCONFDIR##/mnt/}"
- MYCONFDEVICE="/dev/${MYCONFDEVICE%%/*}"
- MYCONFMOUNTPOINT="/mnt/${MYCONFDEVICE##/dev/}"
- MYCONFDIR="${MYCONFMOUNTPOINT}"
- else
- FOUND_CONFIG="none"
- fi
- ;;
- *)
- eerror "Invalid configdir '$MYCONFDIR' specified (must start with /dev/ or /mnt/ or 'scan')." ; eend 1
- eerror "Option ignored."
- FOUND_CONFIG="invalid"
- ;;
- esac
- else
- MYCONFDEVICE="/dev/fd0"
- MYCONFMOUNTPOINT="/mnt/floppy"
- MYCONFDIR="/mnt/floppy"
- fi
+ VNCDIR="/home/${localuser}/.vnc"
+ [ -d "$VNCDIR" ] || mkdir "$VNCDIR"
- eindent
- if [ -z "$FOUND_CONFIG" ]; then
- einfo "Checking ${WHITE}${MYCONFDIR}${NORMAL} for grml configuration files...${NORMAL}"
- [ -d $MYCONFMOUNTPOINT ] || mkdir $MYCONFMOUNTPOINT && chown grml: $MYCONFMOUNTPOINT
- if trymount "$MYCONFDEVICE" "$MYCONFMOUNTPOINT"; then
- MYCONFIG="$(/bin/ls -1d $MYCONFDIR/[Gg][Rr][Mm][Ll].[Ss][Hh] 2>>$DEBUG)"
- if [ -n "$MYCONFIG" -a -f "$MYCONFIG" ]; then
- echo ""
- FOUND_CONFIG="yes"
- einfo "Found, now executing ${WHITE}${MYCONFIG}${NORMAL}."
- echo "6" > /proc/sys/kernel/printk
- . "$MYCONFIG" "$MYCONFDIR" || true
- echo "0" > /proc/sys/kernel/printk
+ if [ ! -x /usr/bin/x11vnc ] ; then
+ eerror "Error: x11vnc not found - can not set up vnc. Please make sure to install the x11vnc package."
+ eend 1
+ else
+ /usr/bin/x11vnc -storepasswd "$VNC_PASSWD" "$VNCDIR"/passwd ; eend $?
+ /bin/chown -R "$localuser": "$VNCDIR"
fi
- umount "$MYCONFMOUNTPOINT" 2>>$DEBUG
- fi
- fi
- [ -n "$FOUND_CONFIG" ] || eerror "Not present."
- eoutdent
-fi
-# }}}
-
-# {{{ Check for extra shellscript on CD-ROM (/cdrom/GRML/grml.sh)
-MYCONFIG="$(/bin/ls -1d /cdrom/GRML/[Gg][Rr][Mm][Ll].[Ss][Hh] 2>>$DEBUG)"
-if [ -n "$MYCONFIG" -a -f "$MYCONFIG" ]; then
- echo ""
- FOUND_CONFIG="yes"
- einfo "grml script/configuration file found on CD, executing ${BLUE}${MYCONFIG}${NORMAL}:"
- echo "6" > /proc/sys/kernel/printk
- . "$MYCONFIG" /cdrom/GRML || true
- echo "0" > /proc/sys/kernel/printk
+ fi
+ if checkbootparam 'vnc_connect' ; then
+ VNC_CONNECT=''
+ VNC_CONNECT="$(getbootparam 'vnc_connect' 2>>$DEBUG)"
+ einfo "Bootoption vnc_connect found, will start vnc with connect to $VNC_CONNECT."
+ #store the options in a file
+ VNCDIR="/home/${localuser}/.vnc"
+ [ -d "$VNCDIR" ] || mkdir "$VNCDIR"
+ echo " --connect $VNC_CONNECT " >> $VNCDIR/options
+ fi
fi
}
# }}}
-# {{{ Check for scripts on CD-ROM
-config_cdrom_scripts(){
-if checkbootparam "script"; then
- for script in /cdrom/scripts/* ; do
- einfo " grml script found on CD, executing ${WHITE}${script}${NORMAL}."
- . $script
- done
+# {{{ set password for default user
+config_passwd(){
+if checkbootparam 'passwd' >>$DEBUG 2>&1; then
+ PASSWD="$(getbootparam 'passwd' 2>>$DEBUG)"
+ config_userlocal
+ einfo "Bootoption passwd found, change password for user '$localuser'."
+ [ -z "$localuser" ] && eend 1
+ if [ -n "$PASSWD" ] ; then
+ echo "$localuser:$PASSWD" | chpasswd -m ; eend $?
+ else
+ eerror "No given password for ssh found. Autostart of SSH will not work." ; eend 1
+ fi
+ eindent
+ ewarn "Warning: please change the password for user grml set via bootparameter as soon as possible!"
+ eoutdent
fi
}
# }}}
# {{{ Sound
-config_mixer(){
-if ! [ -x /usr/bin/aumix ] ; then
- eerror "aumix binary not available. Can not set sound volumes therefore." ; eend 1
-else
+config_mixer () {
+ if ! [ -x /usr/bin/amixer ] ; then
+ eerror "amixer binary not available. Can not set sound volumes therefore."
+ eend 1
+ else
+ if ! [ -r /proc/asound/cards ] ; then
+ ewarn "No soundcard present, skipping mixer settings therefore."
+ eend 0
+ return
+ fi
- if checkbootparam vol ; then
- VOL="$(getbootparam 'vol' 2>>$DEBUG)"
- if [ -z "$VOL" ] ; then
- eerror "Bootoption vol found but no volume level/parameter given. Using defaults." ; eend 1
- VOL='75' # default
- fi
- else
- VOL='75' # default
- fi
+ for card in $(cat /proc/asound/cards| grep -e '^\s*[0-9]' | awk '{print $1}') ; do
+ einfo "Configuring soundcard \"$(awk -F\[ '/^ *'$card' \[/{ FS=" "; $0=$2; print $1}' < /proc/asound/cards)\""
+ eindent
- if checkbootparam nosound ; then
- einfo "Muting sound devices on request."
- # some IBM notebooks require the following stuff:
- if [ -x /usr/bin/amixer ] ; then
- if amixer get Front 1>/dev/null 2>>$DEBUG ; then
- amixer set Front unmute 1>/dev/null
- amixer set Front 0% 1>/dev/null
- fi
- fi
- ERROR=$(aumix -w 0 -v 0 -p 0 -m 0 2>&1) ; RC=$?
- if [ -n "$ERROR" ] ; then
- eindent
- eerror "Problem muting sound devices: $ERROR"
- eoutdent
- fi
- eend $RC
- elif [ -z "$INSTALLED" ]; then
- einfo "Setting mixer volumes to level ${WHITE}${VOL}${NORMAL}."
- # some IBM notebooks require the following stuff:
- if [ -x /usr/bin/amixer ] ; then
- if amixer get Front 1>/dev/null 2>>$DEBUG ; then
- amixer set Front unmute 1>/dev/null
- amixer set Front ${VOL}% 1>/dev/null
+ if checkbootparam 'vol' ; then
+ VOL="$(getbootparam 'vol' 2>>$DEBUG)"
+ if [ -z "$VOL" ] ; then
+ eerror "Bootoption vol found but no volume level/parameter given. Using defaults (75%)."
+ VOL='75'
+ eend 1
+ fi
+ else
+ VOL='75'
fi
- fi
- ERROR=$(aumix -w $VOL -v $VOL -p $VOL -m $VOL 2>&1) ; RC=$?
- if [ -n "$ERROR" ] ; then
- eindent
- eerror "Problem setting mixer volumes: $ERROR"
- eoutdent
- fi
- eend $RC
- fi
-fi
+ if checkbootparam 'nosound' ; then
+ einfo "Muting sound devices on request."
+ ERROR=$(amixer -q set Master mute)
+ RC=$?
+ if [ -n "$ERROR" ] ; then
+ eindent
+ eerror "Problem muting sound devices: $ERROR"
+ eoutdent
+ fi
+ eend $RC
+ elif [ -z "$INSTALLED" ] ; then
+ einfo "Setting mixer volumes to level ${WHITE}${VOL}${NORMAL}."
+
+ if checkbootparam 'micvol' ; then
+ MICVOL="$(getbootparam 'micvol' 2>>$DEBUG)"
+ einfo "Setting microphone to ${WHITE}${MICVOL}${NORMAL}."
+ else
+ MICVOL=0
+ fi
+
+ CONTROLS=$(amixer -c $card scontrols | awk -F"Simple mixer control " '{print $2}')
+ IFSOLD=${IFS:-}
+ IFS='
+'
+ for CONTROL in ${=CONTROLS} ; do
+ if ! echo "${CONTROL}" | grep -q -i "mic" ; then
+ if amixer -c $card sget "${CONTROL}" | grep -q 'Capabilities:.*pswitch' ; then
+ amixer -c $card -q set "${CONTROL}" unmute
+ fi
+ if amixer -c $card sget "${CONTROL}" | grep -q -P 'Capabilities:.*(pvolume| volume)' ; then
+ amixer -c $card -q set "${CONTROL}" "${VOL}"%
+ fi
+ fi
+
+ if [ ${MICVOL} -ne 0 ] ; then
+ if amixer -c $card sget "${CONTROL}" | grep -q 'Capabilities:.*cswitch' ; then
+ amixer -c $card -q set "${CONTROL}" unmute
+ fi
+ if amixer -c $card sget "${CONTROL}" | grep -q 'Capabilities:.*cvolume' ; then
+ amixer -c $card -q set "${CONTROL}" $MICVOL%
+ fi
+ eend $?
+ fi
+ done
+ IFS=$IFSOLD
+ fi # checkbootparam 'nosound'
+ eoutdent
+ done
+ fi
}
# }}}
# {{{ modem detection
config_modem(){
-if checkbootparam "nomodem"; then
+if checkbootparam 'nomodem'; then
ewarn "Skipping check for AC97 modem controller as requested on boot commandline." ; eend 0
else
if [ -x /etc/init.d/sl-modem-daemon ] ; then
- if lspci | grep Intel | grep -q "AC'97 Modem Controller" ; then
- einfo "AC97 modem controller detected. Starting sl-modem-daemon in background."
- /etc/init.d/sl-modem-daemon start >>$DEBUG &
- eend 0
- fi
+ if lspci | grep Intel | grep -q "AC'97 Modem Controller" ; then
+ einfo "AC97 modem controller detected. Start it running 'Start sl-modem-daemon'."
+ eend 0
+ fi
fi
fi
}
# }}}
-# {{{ keyboard add-ons
-config_setkeycodes(){
-if checkbootparam "setkeycodes" ; then
- einfo "Setting keycodes as requested via bootparameter 'setkeycodes'."
- # MS MM keyboard add-on
- # fix
- setkeycodes e001 126 &>/dev/null
- setkeycodes e059 127 &>/dev/null
- # fn keys
- setkeycodes e03b 59 &>/dev/null
- setkeycodes e008 60 &>/dev/null
- setkeycodes e007 61 &>/dev/null
- setkeycodes e03e 62 &>/dev/null
- setkeycodes e03f 63 &>/dev/null
- setkeycodes e040 64 &>/dev/null
- setkeycodes e041 65 &>/dev/null
- setkeycodes e042 66 &>/dev/null
- setkeycodes e043 67 &>/dev/null
- setkeycodes e023 68 &>/dev/null
- setkeycodes e057 87 &>/dev/null
- setkeycodes e058 88 &>/dev/null
- # hp keycodes
- setkeycodes e00a 89 e008 90 &>/dev/null
- eend 0
-fi
-}
-# }}}
-
# {{{ wondershaper
config_wondershaper(){
- if checkbootparam "wondershaper" ; then
- WONDER="$(getbootparam wondershaper 2>>$DEBUG)"
+ if checkbootparam 'wondershaper' ; then
+ WONDER="$(getbootparam 'wondershaper' 2>>$DEBUG)"
CMD=wondershaper
DEVICE=""
DOWNSTREAM=""
# {{{ syslog-ng
config_syslog(){
- if checkbootparam "nosyslog"; then
- ewarn "Not starting syslog-ng as requested on boot commandline." ; eend 0
+ if checkbootparam 'nosyslog'; then
+ ewarn "Not starting syslog daemon as requested on boot commandline." ; eend 0
else
- einfo "Starting syslog-ng in background."
- /etc/init.d/syslog-ng start 1>>$DEBUG &
- eend 0
+ SYSLOGD=''
+ [ -x /etc/init.d/syslog-ng ] && SYSLOGD='syslog-ng'
+ [ -x /etc/init.d/rsyslog ] && SYSLOGD='rsyslog'
+ [ -x /etc/init.d/dsyslog ] && SYSLOGD='dsyslog'
+ [ -x /etc/init.d/sysklogd ] && SYSLOGD='sysklogd'
+ [ -x /etc/init.d/inetutils-syslogd ] && SYSLOGD='inetutils-syslogd'
+
+ if [ -z "$SYSLOGD" ] ; then
+ eerror "No syslog daemon found." ; eend 1
+ else
+ einfo "Starting $SYSLOGD in background."
+ /etc/init.d/$SYSLOGD start >>$DEBUG &
+ eend 0
+ fi
fi
}
# }}}
# {{{ gpm
config_gpm(){
- if checkbootparam "nogpm"; then
+ if checkbootparam 'nogpm'; then
ewarn "Not starting GPM as requested on boot commandline." ; eend 0
else
- einfo "Starting gpm in background."
-# /etc/init.d/gpm start 1>>$DEBUG &
- ( while [ ! -e /dev/psaux ]; do sleep 5; done; /etc/init.d/gpm start 1>>$DEBUG ) &
- eend 0
+ if ! [ -r /dev/input/mice ] ; then
+ eerror "No mouse found - not starting GPM." ; eend 1
+ else
+ einfo "Starting gpm in background."
+ /etc/init.d/gpm start >>$DEBUG &
+ # ( while [ ! -e /dev/psaux ]; do sleep 5; done; /etc/init.d/gpm start >>$DEBUG ) &
+ eend 0
+ fi
fi
}
# }}}
# {{{ services
config_services(){
- if checkbootparam "services" ; then
- SERVICE="$(getbootparam services 2>>$DEBUG)"
+ if checkbootparam 'services' ; then
+ SERVICE="$(getbootparam 'services' 2>>$DEBUG)"
SERVICELIST=$(echo "$SERVICE" | sed 's/,/\\n/g')
SERVICENL=$(echo "$SERVICE" | sed 's/,/ /g')
- einfo "Starting service(s) ${SERVICENL} in background."
for service in $(echo -e $SERVICELIST) ; do
- /etc/init.d/${service} start 1>>$DEBUG &
+ # support running (custom) init scripts in non-blocking mode
+ # if they contain the keyword "DO_NO_RUN_IN_BACKGROUND".
+ if grep -q 'DO_NO_RUN_IN_BACKGROUND' "/etc/init.d/${service}" 2>>$DEBUG ; then
+ einfo "Starting service ${service}."
+ /etc/init.d/${service} start >>$DEBUG
+ else
+ einfo "Starting service ${service} in background."
+ /etc/init.d/${service} start >>$DEBUG &
+ fi
done
- [ "$?" == "0" ] ; eend $?
+ eend $?
fi
}
# }}}
-# {{{ config files
-config_netconfig(){
- if checkbootparam netconfig ; then
- CONFIG="$(getbootparam 'netconfig' 2>>$DEBUG)"
- CONFIGFILE='/tmp/netconfig.grml'
-
+# {{{ remote files
+get_remote_file() {
+ [ "$#" -eq 2 ] || ( echo "Error: wrong parameter for get_remote_file()" ; return 1 )
+ SOURCE=$(eval echo "$1")
+ TARGET="$2"
getconfig() {
- wget --timeout=10 --dns-timeout=10 --connect-timeout=10 \
- --read-timeout=10 $CONFIG -O $CONFIGFILE && return 0 || return 1
+ wget --timeout=10 --dns-timeout=10 --connect-timeout=10 --tries=1 \
+ --read-timeout=10 ${SOURCE} -O ${TARGET} && return 0 || return 1
}
- einfo "Trying to get ${WHITE}${CONFIG}${NORMAL}"
+ einfo "Trying to get ${WHITE}${TARGET}${NORMAL}"
counter=10
while ! getconfig && [[ "$counter" != 0 ]] ; do
- echo -n "Sleeping for 5 seconds and trying to get config again... "
+ echo -n "Sleeping for 1 second and trying to get config again... "
counter=$(( counter-1 ))
echo "$counter tries left" ; sleep 1
done
- if [ -r "$CONFIGFILE" ] ; then
+ if [ -s "$TARGET" ] ; then
einfo "Downloading was successfull." ; eend 0
- einfo "md5sum of ${WHITE}${CONFIG}${NORMAL}: "
- md5sum $CONFIGFILE ; eend 0
- cd / && einfo "Unpacking ${WHITE}${CONFIGFILE}${NORMAL}:" && /usr/bin/unp $CONFIGFILE $EXTRACTOPTIONS ; eend $?
+ einfo "md5sum of ${WHITE}${TARGET}${NORMAL}: "
+ md5sum ${TARGET} ; eend 0
+ return 0;
else
- einfo "Sorry, could not fetch $CONFIG" ; eend 1
- fi
+ einfo "Sorry, could not fetch ${SOURCE}" ; eend 1
+ return 1;
fi
}
# }}}
-# {{{ blindsound
-config_blindsound(){
- if checkbootparam "blind" ; then
- beep
- flite -o play -t "welcome to the gremel system"
+# {{{ config files
+config_netconfig(){
+ if checkbootparam 'netconfig' ; then
+ CONFIG="$(getbootparam 'netconfig' 2>>$DEBUG)"
+ CONFIGFILE='/tmp/netconfig.grml'
+
+ if get_remote_file ${CONFIG} ${CONFIGFILE} ; then
+ cd / && einfo "Unpacking ${WHITE}${CONFIGFILE}${NORMAL}:" && /usr/bin/unp $CONFIGFILE $EXTRACTOPTIONS ; eend $?
+ fi
+
fi
}
# }}}
-# {{{ welcome sound
-config_welcome(){
- if checkbootparam welcome ; then
- flite -o play -t "welcome to the gremel system"
+# {{{ remote scripts
+config_netscript() {
+ if checkbootparam 'netscript' ; then
+ CONFIG="$(getbootparam 'netscript' 2>>$DEBUG)"
+ SCRIPTFILE='/tmp/netscript.grml'
+
+ if get_remote_file ${CONFIG} ${SCRIPTFILE} ; then
+ chmod +x ${SCRIPTFILE}
+ einfo "Running ${WHITE}${SCRIPTFILE}${NORMAL}:" && NETSCRIPT=${CONFIG} ${SCRIPTFILE} ; eend $?
+ fi
+
fi
}
# }}}
+# {{{ stats
+config_stats() {
+ if ! checkbootparam 'nostats' ; then
+ BASE_URL="http://stats.grml.org/report/"
+ ACTION_NAME=Boot
+
+ HOST_ID=$(cat /proc/sys/kernel/random/boot_id)
+
+ grep -q " lm " /proc/cpuinfo && HAS_64BIT="1" || HAS_64BIT="0"
+ DATE_STRING=$(date +'h=%H&m=%M&s=%S')
+ [ -e /etc/grml_version ] && VERSION=$(cat /etc/grml_version) || \
+ VERSION=$(lsb_release -d | awk -F: '{gsub(/^[ \t]+/, "", $2); print $2}')
+
+ PARAMS="$( echo "$CMDLINE" | sed -e 's/=[^ ]*/=x/g' | tr " " "\n"|sort|tr "\n" " " )"
+
+ echo "$CMDLINE" | grep -q -e "fetch" -e "nfsroot" && BOOT="remote"
+ [ -z "$BOOT" ] && BOOT="local"
+
+ ADDITIONAL_PARAMS=""
+ ( [ -n "$COLUMNS" ] && [ -n "$LINES" ] ) && \
+ ADDITIONAL_PARAMS="$ADDITIONAL_PARAMS&res=$((COLUMNS * 8))x$((LINES * 16))"
+
+ URI='$BASE_URL?action=${ACTION_NAME}\&$DATE_STRING\&unique_id=${HOST_ID}\&support_64bit=$HAS_64BIT\&version=$VERSION\&bootup=$BOOT\¶ms=$PARAMS$ADDITIONAL_PARAMS'
+
+ get_remote_file "$URI" "/dev/null" >/dev/null 2>&1 &!
+ fi
+}
+# }}}
# {{{ fix/workaround for unionfs
fix_unionfs(){
if [ -z "$INSTALLED" ]; then
}
# }}}
-# {{{ create all /mnt-directories
-create_mnt_dirs(){
- ewarn "create_mnt_dirs is deprecated as grml-rebuildfstab does all we need."
- ewarn "Please set CONFIG_CREATE_MNT_DIRS='no' in /etc/grml/autoconfig" ; eend 0
-}
-# }}}
-
# {{{ start X window system via grml-x
config_x_startup(){
-if checkbootparam startx ; then
- if [ -x /usr/X11R6/bin/X ] ; then
+# make sure we start X only if startx is used *before* a nostartx option
+# so it's possible to disable automatic X startup using nostart
+if checkbootparam 'startx' && ! echo "$CMDLINE" | grep -q 'startx.*nostartx' ; then
+ if [ -x "$(which X)" ] ; then
if [ -z "$INSTALLED" ] ; then
WINDOWMANAGER="$(getbootparam 'startx' 2>>$DEBUG)"
if [ -z "$WINDOWMANAGER" ] ; then
- einfo "No window manager specified. Taking ${WHITE}wm-ng${NORMAL} as default." && eend 0
- WINDOWMANAGER="wm-ng"
+ einfo "No window manager specified. Using default one." && eend 0
else
einfo "Window manager ${WHITE}${WINDOWMANAGER}${NORMAL} found as bootoption." && eend 0
fi
- einfo "Changing to runlevel 5 for starting grml-x ${WINDOWMANAGER}. Just exit X windows system to get full featured consoles."
- config_userfstab || fstabuser='grml'
+ einfo "Setting up and invoking grml-x ${WINDOWMANAGER}. Just exit X windows system to get full featured consoles."
+ config_userlocal
cat>|/etc/init.d/xstartup<<EOF
#!/bin/sh
-# su - $fstabuser -c 'grml-x "$WINDOWMANAGER"'
-sudo -u $fstabuser -i /usr/bin/grml-x $WINDOWMANAGER 1>>$DEBUG
+su $localuser -c "/usr/bin/grml-x ${WINDOWMANAGER}"
EOF
chmod 755 /etc/init.d/xstartup
- sed -i 's/^allowed_users=.*/allowed_users=anybody/' /etc/X11/Xwrapper.config
- sed -i 's#^6.*#6:2345:respawn:/bin/zsh --login -c "/etc/init.d/xstartup ; /bin/zsh"#' /etc/inittab
+
+ # adjust inittab for xstartup
+ if grep -q '^6:' /etc/inittab ; then
+ sed -i 's|^6:.*|6:2345:respawn:/bin/zsh --login -c "/etc/init.d/xstartup ; /usr/share/grml-scripts/run-welcome" >/dev/tty6 2>\&1 </dev/tty6|' /etc/inittab
+ else # just append tty6 to inittab if no definition is present:
+ echo '6:2345:respawn:/bin/zsh --login -c "/etc/init.d/xstartup ; /usr/share/grml-scripts/run-welcome" >/dev/tty6 2>&1 < /dev/tty6' >> /etc/inittab
+ fi
+
/sbin/telinit q ; eend $?
+
+ if grep -q '^allowed_users=' /etc/X11/Xwrapper.config ; then
+ sed -i 's/^allowed_users=.*/allowed_users=anybody/' /etc/X11/Xwrapper.config
+ else
+ echo 'allowed_users=anybody' >> /etc/X11/Xwrapper.config
+ fi
+
else
- eerror "We are not running from CD - startx will not work, skipping it.
- Please use something like xdm, gdm or kdm for starting X on a harddisk system!" ; eend 1
+ eerror "We are not running in live mode - startx will not work, skipping it."
+ eerror " -> Please use something like xdm, gdm or kdm for starting X on a harddisk system!" ; eend 1
fi
else
- eerror "/usr/X11R6/bin/X is not present on this grml flavour.
- Boot parameter startx does not work therefore." ; eend 1
+ eerror "/usr/bin/X is not present on this grml flavour."
+ eerror " -> Boot parameter startx does not work therefore." ; eend 1
fi
fi
}
# {{{ configuration framework
config_extract(){
-if checkbootparam extract ; then
+if checkbootparam 'extract' ; then
EXTRACT="$(getbootparam 'extract' 2>>$DEBUG)"
EXTRACTOPTIONS="-- -x $EXTRACT"
fi
}
-config_automount(){
-if checkbootparam noautoconfig ; then
- ewarn "Skipping running automount of device(s) labeled GRMLCFG as requested." ; eend 0
+config_finddcsdir() {
+# - If no GRMLCFG partition is found and noautoconfig is _not_ given
+# on the command line, nothing is changed and the dcs files are
+# searched within the .iso, $dcs-dir is set to the root directory
+# within the .iso
+# - If a GRMLCFG partition is found, $dcs-dir is set to the root of
+# the GRMLCFG partition unless noautoconfig is set. If noautoconfig is
+# set, $dcs-dir is set to the root directory within the .iso.
+# - If myconfig=foo is set on the command line, $dcs-dir is set to
+# foo, even if a GRMLCFG partition is present.
+DCSDIR=""
+DCSMP="/mnt/grml"
+# autoconfig, see issue673
+GRMLCFG="$(getbootparam 'autoconfig' 2>>$DEBUG)"
+[ -n "$GRMLCFG" ] || GRMLCFG="GRMLCFG"
+if checkbootparam 'noautoconfig' || checkbootparam 'forensic' ; then
+ ewarn "Skipping running automount of device(s) labeled $GRMLCFG as requested." ; eend 0
else
- if [ -z "$INSTALLED" ] ; then
- einfo "Searching for device(s) labeled with GRMLCFG." ; eend 0
- eindent
- [ -d /mnt/grml ] || mkdir /mnt/grml
- umount /mnt/grml 1>>$DEBUG 2>&1 # make sure it is not mounted
-# We do need the following fix so floppy disk is available to blkid in any case :-/
- if [ -r /dev/fd0 ] ; then
- einfo "Floppy device detected. Trying to access floppy disk. (Disable this via boot option: noautoconfig)"
-# dd if=/dev/fd0 of=/dev/null bs=512 count=1 1>>$DEBUG 2>&1
- if timeout 4 dd if=/dev/fd0 of=/dev/null bs=512 count=1 1>>$DEBUG 2>&1 ; then
- blkid /dev/fd0 1>>$DEBUG 2>&1
- fi
- fi
- DEVICE=$(blkid -t LABEL=GRMLCFG | head -1 | awk -F: '{print $1}')
- [ -n "$DEVICE" ] && mount -t auto -o ro $DEVICE /mnt/grml ; RC="$?"
- if [[ $RC == 0 ]]; then
- einfo "Mounting device $DEVICE labeled GRMLCFG succeeded." ; eend 0
-
- CONFIG=''
- CONFIG="$(/bin/ls -1d /mnt/grml/[Cc][Oo][Nn][Ff][Ii][Gg].[Tt][Bb][Zz] 2>>$DEBUG)"
- if [ -n "$CONFIG" ]; then
- einfo "Found file ${WHITE}${CONFIG}${NORMAL} - trying to extract it."
- cd /
- unp $CONFIG $EXTRACTOPTIONS ; eend $?
- else
- ewarn "Sorry, could not find file config.tbz on device with label GRMLCFG." ; eend 1
- fi
+ if [ -z "$INSTALLED" ] ; then
+ if checkbootparam 'myconfig' ; then
+ DCSDEVICE="$(getbootparam 'myconfig' 2>>$DEBUG)"
+ if [ -z "$DCSDEVICE" ]; then
+ eerror "Error: No device for bootoption myconfig provided." ; eend 1
+ fi # [ -z "$DCSDEVICE" ]
+ elif checkvalue $CONFIG_MYCONFIG; then # checkbootparam myconfig
+ einfo "Searching for device(s) labeled with $GRMLCFG. (Disable this via boot option: noautoconfig)" ; eend 0
+ eindent
+ # We do need the following fix so floppy disk is available to blkid in any case :-/
+ if [ -r /dev/fd0 ] ; then
+ einfo "Floppy device detected. Trying to access floppy disk."
+ if timeout 4 dd if=/dev/fd0 of=/dev/null bs=512 count=1 >>$DEBUG 2>&1 ; then
+ blkid /dev/fd0 >>$DEBUG 2>&1
+ fi
+ fi
+ DCSDEVICE=$(blkid -t LABEL=$GRMLCFG | head -1 | awk -F: '{print $1}')
+
+ modprobe 9p 2>/dev/null || true
+ if [ -z "$DCSDEVICE" ] && grep -q 9p /proc/filesystems ; then
+ if grep -q "$GRMLCFG" /sys/bus/virtio/devices/*/mount_tag 2>/dev/null ; then
+ einfo "Found 9p-virtio fs with mount_tag $GRMLCFG"
+ DCSDEVICE="$GRMLCFG"
+ MOUNTOPTIONS="ro,trans=virtio"
+ DCSFS="9p"
+ fi
+ fi
- SCRIPT=''
- SCRIPT="$(/bin/ls -1d /mnt/grml/[Gg][Rr][Mm][Ll].[Ss][Hh] 2>>$DEBUG)"
- if [ -n "$SCRIPT" ]; then
- einfo "Found script ${WHITE}${SCRIPT}${NORMAL} - trying to execute it."
- $SCRIPT ; eend $?
+ if [ -n "$DCSDEVICE" ]; then
+ DCSMP="/mnt/grmlcfg"
+ fi
+ eoutdent
fi
- grep -q '/mnt/grml' /proc/mounts && umount /mnt/grml
- else
- ewarn "No devices with label GRMLCFG found." ; eend 0
- fi
- eoutdent
- fi
-fi
-}
-config_myconfig(){
-if checkbootparam myconfig ; then
- MOUNTDEVICE="$(getbootparam 'myconfig' 2>>$DEBUG)"
- if [ -n "$MOUNTDEVICE" ]; then
- if checkbootparam file ; then
- FILENAME="$(getbootparam 'file' 2>>$DEBUG)"
- [ -n "$FILENAME" ] || FILENAME='config.tbz'
- fi
- [ -d /mnt/grml ] || mkdir /mnt/grml
- umount /mnt/grml 1>>$DEBUG 2>&1 # make sure it is not mounted
- mount -o ro -t auto $MOUNTDEVICE /mnt/grml ; RC="$?"
- if [[ $RC == 0 ]]; then
- einfo "Successfully mounted $MOUNTDEVICE to /mnt/grml (readonly)." ; eend 0
+ # if not specified/present then assume default:
+ if [ -z "$DCSDEVICE" ]; then
+ DCSDIR="/live/image"
+ else
eindent
- CONFIG=''
- CONFIG="$(/bin/ls -1d /mnt/grml/[Cc][Oo][Nn][Ff][Ii][Gg].[Tt][Bb][Zz] 2>>$DEBUG)"
- if [ -n "$CONFIG" ]; then
- einfo "Found file ${WHITE}${CONFIG}${NORMAL} - trying to extract it."
- cd /
- unp $CONFIG $EXTRACTOPTIONS ; eend $?
+ einfo "debs, config, scripts are read from $DCSDEVICE." ; eend 0
+ DCSDIR="$(< /proc/mounts awk -v DCSDEV=$DCSDEVICE '{if ($1 == DCSDEV) { print $2 }}')"
+ if [ -n "$DCSDIR" ]; then
+ ewarn "$DCSDEVICE already mounted on $DCSDIR"; eend 0
else
- ewarn "Sorry, could not find file config.tbz on device with label GRMLCFG." ; eend 1
- fi
-
- SCRIPT=''
- SCRIPT="$(/bin/ls -1d /mnt/grml/[Gg][Rr][Mm][Ll].[Ss][Hh] 2>>$DEBUG)"
- if [ -n "$SCRIPT" ]; then
- einfo "Found script ${WHITE}${SCRIPT}${NORMAL} - trying to execute it."
- $SCRIPT ; eend $?
+ [ -d $DCSMP ] || mkdir $DCSMP
+ umount $DCSMP >>$DEBUG 2>&1 # make sure it is not mounted
+ mount -o ${MOUNTOPTIONS:-ro} -t ${DCSFS:-auto} $DCSDEVICE $DCSMP ; RC="$?"
+ if [[ $RC == 0 ]]; then
+ einfo "Successfully mounted $DCSDEVICE to $DCSMP (readonly)." ; eend 0
+ else
+ eerror "Error: mounting $DCSDEVICE to $DCSMP (readonly) failed." ; eend 1
+ fi
+ DCSDIR="$DCSMP"
fi
eoutdent
- else
- einfo "Could not mount $MOUNTDEVICE to /mnt/grml - sorry." ; eend 1
- fi # mount $MOUNTDEVICE
- grep -q '/mnt/grml' /proc/mounts && umount /mnt/grml
- else
- einfo "Sorry, no device for bootoption myconfig provided. Skipping." ; eend 1
- fi # [ -n "$MOUNTDEVICE" ]
-fi # checkbootparam myconfig
+ fi
+ fi
+fi
-if checkbootparam "partconf" ; then
+if [ -n "$DCSDIR" -a "$DCSDIR" != "/live/image" ] ; then
+ einfo "Debs, config, scripts (if present) will be read from $DCSDIR." ; eend 0
+elif checkbootparam 'debs' || checkbootparam 'config' || checkbootparam 'scripts'; then
+ einfo "Debs, config, scripts will be read from the live image directly." ; eend 0
+fi
+}
+
+
+config_partconf() {
+if checkbootparam 'partconf' ; then
MOUNTDEVICE="$(getbootparam 'partconf' 2>>$DEBUG)"
if [ -n "$MOUNTDEVICE" ]; then
[ -d /mnt/grml ] || mkdir /mnt/grml
# {{{ /cdrom/.*-options
config_debs(){
-if checkbootparam "debs" ; then
- DEBS="$(getbootparam 'debs' 2>>$DEBUG)"
- einfo "Tring to install debian package(s) ${DEBS}"
- dpkg -i /cdrom/debs/$DEBS* ; eend $?
+if checkbootparam 'debs' ; then
+ iszsh && setopt localoptions shwordsplit
+ DEBS="$(getbootparam 'debs' 2>>$DEBUG)"
+ if [ -z "$DEBS" ] ; then
+ DEBS="*.deb"
+ fi
+ if ! echo $DEBS | grep -q '/'; then
+ # backwards compatibility: if no path is given get debs from debs/
+ DEBS="debs/$DEBS"
+ fi
+ einfo "Tring to install debian package(s) ${DEBS}"
+ DEBS="$(eval echo ${DCSDIR}/$DEBS)"
+ dpkg -i $DEBS ; eend $?
+fi
+}
+
+config_scripts(){
+if checkbootparam 'scripts' || [ "$DCSMP" = "/mnt/grmlcfg" ]; then
+ SCRIPTS="$(getbootparam 'scripts' 2>>$DEBUG)"
+ if [ -d ${DCSDIR}/scripts ] && [ -z "$SCRIPTS" ]; then
+ SCRIPTS="$(cd ${DCSDIR}/scripts; /bin/ls -1d [Gg][Rr][Mm][Ll].[Ss][Hh] 2>>$DEBUG)"
+ fi
+ if ! echo $SCRIPTS | grep -q '/'; then
+ # backwards compatibility: if no path is given get scripts from scripts/
+ SCRIPTS="scripts/$SCRIPTS"
+ fi
+ if [ "$DCSMP" = "/mnt/grmlcfg" ]; then
+ # we are executing from a GRMLCFG labeled fs
+ # kick everything we have done before and start over
+ SCRIPTS="$(cd ${DCSDIR}; /bin/ls -1d [Gg][Rr][Mm][Ll].[Ss][Hh] 2>>$DEBUG)"
+ fi
+ if [ -n "$SCRIPTS" ]; then
+ SCRIPTS="${DCSDIR}/$SCRIPTS"
+ if [ "$DCSMP" = "/mnt/grmlcfg" ]; then
+ einfo "Trying to execute ${SCRIPTS}"
+ sh -c $SCRIPTS
+ elif [ -d "$SCRIPTS" ]; then
+ einfo "Bootparameter scripts found. Trying to execute from directory ${SCRIPTS}:"
+ run-parts $SCRIPTS
+ else
+ einfo "Bootparameter scripts found. Trying to execute ${SCRIPTS}:"
+ sh -c $SCRIPTS
+ fi
+ fi
fi
}
config_config(){
-if checkbootparam "config" ; then
+if checkbootparam 'config' || [ "$DCSMP" = "/mnt/grmlcfg" ]; then
CONFIG="$(getbootparam 'config' 2>>$DEBUG)"
- [ -z "$CONFIG" ] && CONFIG='config.tbz'
- einfo "Bootoption config found. config is set to: $CONFIG"
- eindent
- einfo "Trying to extract configuration file ${CONFIG}:"
- cd / && unp /cdrom/config/$CONFIG $EXTRACTOPTIONS ; eend $?
- eoutdent
+ if [ -z "$CONFIG" ]; then
+ CONFIG="$(cd ${DCSDIR}; ls -1d [Cc][Oo][Nn][Ff][Ii][Gg].[Tt][Bb][Zz] 2>>$DEBUG)"
+ fi
+ if [ -n "$CONFIG" ]; then
+ if [ -d "${DCSDIR}/${CONFIG}" ] ; then
+ einfo "Taking configuration from directory ${DCSDIR}/${CONFIG}"
+
+ cp -a ${DCSDIR}/${CONFIG}/* /
+ elif [ -f "${DCSDIR}/${CONFIG}" ]; then
+ einfo "Extracting configuration from file ${DCSDIR}/${CONFIG}"
+
+ cd /
+ unp ${DCSDIR}/${CONFIG} $EXTRACTOPTIONS ; eend $?
+ else
+ ewarn "Sorry, could not find configuration file or directory ${DCSDIR}/${FILENAME}." ; eend 1
+ fi
+ fi
fi
}
+# }}}
-config_scripts(){
-if checkbootparam "scripts" ; then
- SCRIPTS="$(getbootparam 'scripts' 2>>$DEBUG)"
- [ -z "$SCRIPTS" ] && SCRIPTS='grml.sh'
- einfo "Bootparameter scripts found. Trying to execute ${SCRIPTS}:"
- sh -c /cdrom/scripts/$SCRIPTS ; eend $?
+# {{{ confing_umount_dcsdir
+config_umount_dcsdir(){
+ # umount $DCSMP if it was mounted by finddcsdir
+ grep -q "$DCSMP" /proc/mounts && umount "$DCSMP"
+}
+# }}}
+
+# {{{ mypath
+config_mypath(){
+if checkbootparam 'mypath' ; then
+ MY_PATH="$(getbootparam 'mypath' 2>>$DEBUG)"
+ einfo "Bootparameter mypath found, adding ${MY_PATH} to /etc/grml/my_path"
+ touch /etc/grml/my_path
+ chmod 644 /etc/grml/my_path
+ # make sure the directories exist:
+ eindent
+ for i in $(echo $MY_PATH | sed 's/:/\n/g') ; do
+ if ! [ -d "$i" ] ; then
+ einfo "Creating directory $i"
+ mkdir -p "$i" ; eend $?
+ fi
+ done
+ grep -q "${MY_PATH}" /etc/grml/my_path || echo "${MY_PATH}" >> /etc/grml/my_path ; eend $?
+ eoutdent
fi
}
# }}}
# {{{ distcc
config_distcc(){
-if checkbootparam "distcc" ; then
- OPTIONS="$(getbootparam distcc 2>>$DEBUG)"
+if checkbootparam 'distcc' ; then
+ OPTIONS="$(getbootparam 'distcc' 2>>$DEBUG)"
if [ -n "$OPTIONS" ]; then
NET=""
INTERFACE=""
)
einfo "Starting distcc for network ${NET}, listening on ${IP}."
- /etc/init.d/distcc start 1>/dev/null ; eend $?
+ /etc/init.d/distcc start >/dev/null ; eend $?
eoutdent
else
eerror "No ip address for $INTERFACE found. distcc can not be used without it." ; eend 1
fi
fi
-if checkbootparam "gcc"; then
- GCC="$(getbootparam gcc 2>>$DEBUG)"
+if checkbootparam 'gcc'; then
+ GCC="$(getbootparam 'gcc' 2>>$DEBUG)"
eindent
einfo "Pointing /usr/bin/gcc to /usr/bin/gcc-${GCC}."
eoutdent
ln -s /usr/bin/gcc-${GCC} /usr/bin/gcc ; eend $?
fi
-if checkbootparam "gpp"; then
- GPP="$(getbootparam gpp 2>>$DEBUG)"
+if checkbootparam 'gpp'; then
+ GPP="$(getbootparam 'gpp' 2>>$DEBUG)"
eindent
einfo "Pointing /usr/bin/g++ to /usr/bin/g++-${GPP}."
if [ -x /usr/bin/g++-${GPP} ] ; then
# in /etc/runlevel.conf
config_modules(){
MODULES_FILE=/etc/grml/modules
-if checkbootparam nomodules ; then
+if checkbootparam 'nomodules' ; then
ewarn "Skipping loading of modules defined in ${MODULES_FILE} as requested." ; eend 0
elif [ -z "$INSTALLED" ]; then
if [ -r $MODULES_FILE ] ; then
}
# }}}
-# {{{ 915resolution
-config_915resolution(){
-if checkbootparam "915resolution" ; then
- OPTIONS="$(getbootparam 915resolution 2>>$DEBUG)"
- if [ -x /usr/sbin/915resolution ]; then
- CMD=915resolution
- MODE=""
- XRESO=""
- YRESO=""
- if [ -n "$OPTIONS" ]; then
- # Extra options
- MODE="${OPTIONS%%,*}"
- R="${OPTIONS#*,}"
- if [ -n "$R" -a "$R" != "$OPTIONS" ]; then
- OPTIONS="$R"
- XRESO="${OPTIONS%%,*}"
- R="${OPTIONS#*,}"
- if [ -n "$R" -a "$R" != "$OPTIONS" ]; then
- OPTIONS="$R"
- YRESO="${OPTIONS%%,*}"
- R="${OPTIONS#*,}"
- fi
- fi
- fi
- einfo "Running 915resolution with options ${MODE} ${XRESO} ${YRESO}."
- [ -n "$MODE" ] && [ -n "$XRESO" ] && [ -n "$YRESO" ] && ( sh -c "$CMD $MODE $XRESO $YRESO" & )
- eend 0
- fi
-fi
-}
-# }}}
-
# {{{ SW-RAID
config_swraid(){
- if [ -z "$INSTALLED" ] ; then
- if checkbootparam "noraid" -o checkbootparam "forensic" ; then
- ewarn "Skipping search for SW-RAID as requested on boot commandline." ; eend 0
+ [ -n "$INSTALLED" ] && return 0
+
+ # notice: checkbootparam "forensic" is just for users who don't know how to really use the bootoption
+ if checkbootparam 'noraid' || checkbootparam 'noswraid' || \
+ checkbootparam 'forensic' || checkbootparam 'raid=noautodetect' ; then
+ ewarn "Skipping SW-RAID code as requested on boot commandline." ; eend 0
else
+ [ -e /proc/mdstat ] || modprobe md_mod
if ! [ -x /sbin/mdadm ] ; then
eerror "mdadm not available, can not execute it." ; eend 1
else
- einfo "Searching for software RAID arrays:"
- eindent
- IFSOLD=${IFS:-}
- IFS='
-'
- for line in $(mdadm --assemble --scan --auto=yes --symlink=no 2>&1) ; do
- case $line in
- *'No arrays found'*)
- ewarn "$line" ; eend 0
- ;;
- *)
- einfo "$line" ; eend 0
- ;;
- esac
- done
- IFS=$IFSOLD
- eoutdent
+ # if ! egrep -qv '^(MAILADDR.*|#.*|)$' /etc/mdadm/mdadm.conf 2>>$DEBUG ; then
+ # find out whether we have a valid configuration file already
+ if ! grep -q ARRAY /etc/mdadm/mdadm.conf 2>>$DEBUG ; then
+ einfo "Creating /etc/mdadm/mdadm.conf for use with mdadm."
+ [ -r /etc/mdadm/mdadm.conf ] && mv /etc/mdadm/mdadm.conf /etc/mdadm/mdadm.conf.old
+ MDADM_MAILADDR__='root' /usr/share/mdadm/mkconf > /etc/mdadm/mdadm.conf ; eend $?
+ else
+ ewarn "/etc/mdadm/mdadm.conf looks like a configured mdadm setup, will not touch it." ; eend 0
+ fi
- if [ -r /proc/mdstat ] ; then
+ if ! checkbootparam 'swraid' ; then
eindent
- MDSTAT=$(grep '^md[0-9]' /proc/mdstat)
- if [ -z "$MDSTAT" ] ; then
- ewarn "No active arrays found" ; eend 0
- else
- IFSOLD=${IFS:-}
- IFS='
-'
- for line in $(grep '^md[0-9]' /proc/mdstat) ; do
- einfo "active arrays: $line" ; eend 0
- done
- IFS=$IFSOLD
- fi
+ einfo "Just run 'Start mdadm-raid' to assemble md arrays or boot using 'swraid' as bootoption for autostart."
eoutdent
- fi
+ else
+ einfo "Bootoption swraid found. Searching for software RAID arrays:"
+ eindent
+ IFSOLD=${IFS:-}
+ IFS='
+'
+ for line in $(mdadm --assemble --scan --auto=yes --symlink=no 2>&1) ; do
+ case $line in
+ *'No arrays found'*)
+ ewarn "$line" ; eend 0
+ ;;
+ *)
+ einfo "$line" ; eend 0
+ ;;
+ esac
+ done
+ IFS=$IFSOLD
+ eoutdent
+
+ if [ -r /proc/mdstat ] ; then
+ eindent
+ MDSTAT=$(grep '^md[0-9]' /proc/mdstat)
+ if [ -z "$MDSTAT" ] ; then
+ ewarn "No active arrays found" ; eend 0
+ else
+ IFSOLD=${IFS:-}
+ IFS='
+'
+ for line in $(grep '^md[0-9]' /proc/mdstat) ; do
+ einfo "active arrays: $line" ; eend 0
+ done
+ IFS=$IFSOLD
+ fi
+ eoutdent
+ fi # /proc/mdstat
+ fi # bootoption swraid
fi # is /sbin/mdadm executable?
fi # check for bootoptions
- fi # run only in live-cd mode
}
# }}}
-# {{{ debnet: setup network based on an existing one found on a partition
-config_debnet(){
-if checkbootparam "debnet" ; then
- iszsh && setopt shwordsplit
- DEVICES="$(< /proc/partitions tail -n +3 | awk '{print "/dev/"$4}' | tr "\n" " ")"
- DEVICES="$DEVICES $(ls /dev/mapper/*)"
- FOUND_DEBNET=""
+# {{{ dmraid
+config_dmraid(){
+ [ -n "$INSTALLED" ] && return 0
- einfo "Bootoption 'debnet' found. Searching for Debian network configuration: "
- eindent
- if ! mount | grep '/mnt ' 1>/dev/null 2>&1 ; then
- for i in $DEVICES; do
- if mount -o ro -t auto "$i" /mnt >/dev/null 2>&1; then
- einfo "Scanning on $i"
- if [ -f /mnt/etc/network/interfaces ]; then
- einfo "/etc/network/interfaces found on ${i}" ; eend 0
- FOUND_DEBNET="$i"
- break
- fi
- umount /mnt
- fi
+ if checkbootparam 'nodmraid' ; then
+ ewarn "Skipping dmraid code as requested on boot commandline." ; eend 0
+ return 0
+ fi
+
+ if ! [ -x /sbin/dmraid ] ; then
+ eerror "dmraid not available, can not execute it." ; eend 1
+ return
+ fi
+
+ dmraid_wrapper() {
+ # usage: dmraid_wrapper <dmraid_option>
+ [ -n "$1" ] || return 1
+
+ IFSOLD=${IFS:-}
+ IFS='
+'
+ eindent
+
+ for line in $(dmraid $1 ; echo errcode:$?); do
+ case $line in
+ *'no block devices found'*)
+ einfo "No block devices found" ; eend 0
+ break
+ ;;
+ *'no raid disks'*)
+ einfo "No active dmraid devices found" ; eend 0
+ break
+ ;;
+ errcode:0)
+ eend 0;
+ ;;
+ errcode:1)
+ eend 1
+ ;;
+ *)
+ einfo "$line"
+ ;;
+ esac
done
- if [ -n "$FOUND_DEBNET" ]; then
- einfo "Stopping network."
- pump -k 1>/dev/null 2>&1
- /etc/init.d/networking stop 1>/dev/null 2>&1 ; eend $?
- einfo "Copying Debian network configuration from $FOUND_DEBNET to running system."
- rm -rf /etc/network/run
- cp -a /mnt/etc/network /etc
- rm -rf /etc/network/run
- mkdir /etc/network/run
- umount /mnt ; eend $?
- einfo "Starting network."
- /etc/init.d/networking start ; eend $?
- else
- eerror "/etc/network/interfaces not found." ; eend 1
- fi
- eoutdent
- else
- eerror "Error: /mnt already mounted." ; eend 1
- fi
+ eoutdent
+ IFS=$IFSOLD
+ }
+
+ if checkbootparam 'dmraid' ; then
+ local ACTION="$(getbootparam 'dmraid' 2>>$DEBUG)"
+ if [ "$ACTION" = "off" ] ; then
+ # Deactivates all active software RAID sets:
+ einfo "Deactivating present dmraid sets (as requested via dmraid=off):"
+ dmraid_wrapper -an
+ else
+ # Activate all software RAID sets discovered:
+ einfo "Activating present dmraid sets (as requested via dmraid):"
+ dmraid_wrapper -ay
+ fi
+
+ return
+ fi
+
+ # by default (no special bootoptions) discover all software RAID devices:
+ einfo "Searching for any present dmraid sets:"
+ dmraid_wrapper -r
+}
+# }}}
+
+# {{{ LVM (Logical Volumes)
+config_lvm(){
+ [ -n "$INSTALLED" ] && return 0
+
+ if checkbootparam 'nolvm' ; then
+ ewarn "Skipping LVM code as requested on boot commandline." ; eend 0
+ else
+ # Debian etch provides /etc/init.d/lvm only, newer suites provide /etc/init.d/lvm2
+ if ! [ -x /sbin/lvm -a -x /sbin/lvdisplay ] || ! [ -x /etc/init.d/lvm2 -o -x /etc/init.d/lvm ] ; then
+ eerror "LVM not available, can not execute it." ; eend 1
+ else
+ if lvdisplay 2>&1 | grep -v 'No volume groups found' >/dev/null 2>&1 ; then
+ einfo "You seem to have logical volumes (LVM) on your system."
+ eindent
+ einfo "Just run 'Start lvm2' to activate them or boot using 'lvm' as bootoption for autostart."
+ eend 0
+ if checkbootparam 'lvm' ; then
+ einfo "Bootoption LVM found. Searching for logical volumes:"
+ /etc/init.d/lvm2 start ; eend $?
+ fi
+ eoutdent
+ fi
+ fi # check for lvm binary
+ fi # check for bootoption nolvm
+}
+# }}}
+
+# {{{ debnet: setup network based on an existing one found on a partition
+config_debnet(){
+if checkbootparam 'debnet' ; then
+ einfo "Bootoption 'debnet' found. Searching for Debian network configuration: "
+ /usr/sbin/debnet
fi
}
# }}}
# {{{ disable console blanking
config_blanking(){
-if checkbootparam "noblank" ; then
+if checkbootparam 'noblank' ; then
einfo "Bootoption noblank found. Disabling monitor blanking."
setterm -blank 0 ; eend $?
fi
}
# }}}
-# {{{ grml2hd: automatic installation
-config_grml2hd(){
+# {{{ tohd= bootoption
+config_tohd()
+{
+ if checkbootparam 'tohd' ; then
+ local TARGET="$(getbootparam 'tohd' 2>>$DEBUG)"
+ if [ -z "$TARGET" ] ; then
+ eerror "Error: tohd specified without any partition, can not continue." ; eend 1
+ eerror "Please use something like tohd=/dev/sda9." ; eend 1
+ return 1
+ fi
-if checkbootparam "user" ; then
- NEWUSER=''
- NEWUSER="$(getbootparam 'user' 2>>$DEBUG)"
- sed -i "s/^NEWUSER=.*/NEWUSER=$NEWUSER/" /etc/grml2hd/config || export GRML2HD_FAIL=1
-fi
+ if ! [ -b "$TARGET" ] ; then
+ eerror "Error: $TARGET is not a valid block device, sorry." ; eend 1
+ return 1
+ fi
-if checkbootparam "filesystem" ; then
- FILESYSTEM=''
- FILESYSTEM="$(getbootparam 'filesystem' 2>>$DEBUG)"
- sed -i "s/^FILESYSTEM=.*/FILESYSTEM=$FILESYSTEM/" /etc/grml2hd/config || export GRML2HD_FAIL=1
+ if grep -q $TARGET /proc/mounts ; then
+ eerror "$TARGET already mounted, skipping execution of tohd therefore."
+ eend 1
+ return 1
+ fi
+
+ local MOUNTDIR=$(mktemp -d)
+
+ if mount -o rw "$TARGET" "$MOUNTDIR" ; then
+ einfo "Copyring live system to $TARGET - this might take a while"
+ rsync -a --progress /live/image/live $MOUNTDIR
+ sync
+ umount "$MOUNTDIR"
+ eend $?
+ einfo "Booting with \"grml bootfrom=$TARGET\" should work now." ; eend 0
+ else
+ eerror "Error when trying to mount $TARGET, sorry."; eend 1
+ return 1
+ fi
+
+ rmdir "$MOUNTDIR"
+ fi
+}
+# }}}
+
+# {{{ debootstrap: automatic installation
+config_debootstrap(){
+
+if checkbootparam "BOOT_IMAGE=debian2hd" || checkbootparam "debian2hd" ; then
+
+einfo "Bootoption debian2hd found. Setting up environment for automatic installation via grml-debootstrap." ; eend 0
+
+if ! [ -x /usr/sbin/grml-debootstrap ] ; then
+ eindent
+ eerror "Bootoption debian2hd found, but grml-debootstrap is not available." ; eend 1
+ eoutdent
+ exit 1
fi
-if checkbootparam "partition" ; then
- PARTITION=''
- PARTITION="$(getbootparam 'partition' 2>>$DEBUG)"
+if checkbootparam 'target' ; then
+ TARGET=''
+ TARGET="$(getbootparam 'target' 2>>$DEBUG)"
# notice: the following checks whether the given partition is available, if not the skip
- # execution of grml2hd as it might result in data loss...
- if [ -r $PARTITION ] ; then
- sed -i "s#^PARTITION=.*#PARTITION=$PARTITION#" /etc/grml2hd/config || export GRML2HD_FAIL=1
- else
- ewarn "Partition $PARTITION does not exist. Skipping execution of grml2hd therefore." ; eend 1
+ # execution of grml-debootstrap as it might result in data loss...
+ if ! [ -r "$TARGET" ] ; then
+ eerror "Target $TARGET does not exist. Skipping execution of grml-debootstrap therefore." ; eend 1
fi
+else
+ eindent
+ eerror "No bootoption named target found, can not continue execution of grml-debootstrap." ; eend 1
+ eoutdent
+ exit 1
+fi
+
+if checkbootparam 'grub' ; then
+ GRUB=''
+ GRUB="$(getbootparam 'grub' 2>>$DEBUG)"
fi
-if checkbootparam "mbr" ; then
- BOOT_PARTITION=''
- BOOT_PARTITION="$(getbootparam 'mbr' 2>>$DEBUG)"
- sed -i "s#^BOOT_PARTITION=.*#BOOT_PARTITION=$BOOT_PARTITION#" /etc/grml2hd/config || export GRML2HD_FAIL=1
+if checkbootparam 'groot' ; then
+ GROOT=''
+ GROOT="$(getbootparam 'groot' 2>>$DEBUG)"
fi
-if stringinstring "BOOT_IMAGE=grml2hd " "$CMDLINE" ; then
- cat>|/usr/bin/grml2hd_noninteractive<<EOF
+if checkbootparam 'release' ; then
+ RELEASE=''
+ RELEASE="$(getbootparam 'release' 2>>$DEBUG)"
+fi
+
+if checkbootparam 'mirror' ; then
+ MIRROR=''
+ MIRROR="$(getbootparam 'mirror' 2>>$DEBUG)"
+fi
+
+if checkbootparam 'boot_append' ; then
+ BOOT_APPEND=''
+ BOOT_APPEND="$(getbootparam 'boot_append' 2>>$DEBUG)"
+fi
+
+if checkbootparam 'password' ; then
+ PASSWORD=''
+ PASSWORD="$(getbootparam 'password' 2>>$DEBUG)"
+fi
+
+# now check which options are available
+if [ -n "TARGET" ] ; then
+ TARGETCMD="--target $TARGET"
+else
+ TARGETCMD=''
+ eindent
+ eerror "Target not set via bootoption. Skipping execution of grml-debootstrap therefore."; eend 1
+ eoutdent
+ exit 1
+fi
+[ -n "$GRUB" ] && GRUBCMD="--grub $GRUB" || GRUBCMD=''
+[ -n "$GROOT" ] && GROOTCMD="--groot $GROOT" || GROOTCMD=''
+[ -n "$RELEASE" ] && RELEASECMD="--release $RELEASE" || RELEASECMD=''
+[ -n "$MIRROR" ] && MIRRORCMD="--mirror $MIRROR" || MIRRORCMD=''
+[ -n "$PASSWORD" ] && PASSWORDCMD="--password $PASSWORD" || PASSWORDCMD=''
+[ -n "$BOOT_APPEND" ] && BOOT_APPEND="--boot_append $BOOT_APPEND" || BOOT_APPEND=''
+
+# and finally write script and execute it
+cat>|/usr/bin/grml-debootstrap_noninteractive<<EOF
#!/bin/sh
-GRML2HD_NONINTERACTIVE='yes' grml2hd
+AUTOINSTALL='yes' grml-debootstrap $TARGETCMD $GRUBCMD $GROOTCMD $RELEASECMD $MIRRORCMD $PASSWORDCMD $BOOT_APPEND
EOF
- chmod 755 /usr/bin/grml2hd_noninteractive
- einfo "Bootparameter grml2hd found. Running automatic installation via grml2hd using /etc/grml2hd/config." && eend 0
- if [ -z "$GRML2HD_FAIL" ] ; then
- screen /usr/bin/grml2hd_noninteractive ; einfo "Invoking a shell, just exit to continue booting..." ; /bin/zsh
+
+chmod 750 /usr/bin/grml-debootstrap_noninteractive
+
+screen /usr/bin/grml-debootstrap_noninteractive
+einfo "Invoking a shell, just exit to continue booting..."
+/bin/zsh
+
+fi # checkbootparam "BOOT_IMAGE=debian2hd
+}
+# }}}
+
+config_virtualbox_shared_folders() {
+if $VIRTUALBOX ; then
+ einfo "VirtualBox detected, trying to set up Shared Folders."
+ if ! modinfo vboxsf &>/dev/null ; then
+ ewarn "vboxsf driver not present, not setting up VirtualBox Shared Folders."
+ eend 0
+ elif ! [ -x /usr/sbin/VBoxService ] ; then
+ ewarn "virtualbox-guest-utils not installed, not setting up VirtualBox Shared Folders."
+ eend 0
else
- ewarn "There was an error adjusting /etc/grml2hd/config. Skipping execution of grml2hd for security reasons." ; eend 1
+ eindent
+
+ einfo "Loading vboxsf driver."
+ lsmod | grep -q vboxsf || modprobe vboxsf
+ eend $?
+
+ einfo "Adjusting /dev/vboxguest."
+ chown root:vboxsf /dev/vboxguest
+ chmod 660 /dev/vboxguest
+ eend $?
+
+ config_userfstab
+
+ einfo "Adding $fstabuser to group vboxsf."
+ adduser grml vboxsf &>/dev/null
+ eend $?
+
+ einfo "Starting VBoxService."
+ VBoxService >/dev/null &
+ eend $?
+
+ eoutdent
fi
fi
}
-# }}}
-### {{{ backwards compatible stuff
-config_environment(){
- ewarn "config_environment is deprecated. Please set CONFIG_ENVIRONMENT in /etc/grml/autoconfig to 'no'." ; eend 0
-}
-config_running_from() {
- ewarn "config_running_from is deprecated. Please set CONFIG_RUNNING_FROM in /etc/grml/autoconfig to 'no'." ; eend 0
-}
-config_keyboard(){
- ewarn "config_keyboard is deprecated. Please set CONFIG_KEYBOARD in /etc/grml/autoconfig to 'no'." ; eend 0
+# {{{ Support customization
+config_distri(){
+if checkbootparam 'distri'; then
+ DISTRI="$(getbootparam 'distri' 2>>$DEBUG)"
+ if [ -r "${LIVECD_PATH}"/desktop/"$DISTRI".jpg ] ; then
+ [ -n "$BOOTDEBUG" ] && einfo "Debug: bootoption distri found and file ${LIVECD_PATH}/desktop/${DISTRI} present" && eend 0
+ # make sure the desktop.jpg file is not a symlink, so copying does not file then
+ [ -L /usr/share/grml/desktop.jpg ] && rm /usr/share/grml/desktop.jpg
+ cp "${LIVECD_PATH}"/desktop/"$DISTRI".jpg /usr/share/grml/desktop.jpg
+ fi
+fi
}
# }}}
## END OF FILE #################################################################
-# vim:foldmethod=marker
+# vim:foldmethod=marker expandtab ai ft=zsh shiftwidth=2