# License: This file is licensed under the GPL v2.
################################################################################
-set -e # exit on any error
-
. /etc/debootstrap/config || exit 1
. /etc/debootstrap/variables || exit 1
# use aptitude only if it's available
if [ -x /usr/bin/aptitude ] ; then
- APTINSTALL='aptitude -y --without-recommends install '
+ APTINSTALL="aptitude -y --without-recommends install $DPKG_OPTIONS"
APTUPDATE='aptitude update'
else
- APTINSTALL='apt-get --force-yes -y install'
+ APTINSTALL="apt-get --force-yes -y --no-install-recommends install $DPKG_OPTIONS"
APTUPDATE='apt-get update'
fi
echo "$2" > "$STAGES/$1"
return 0
elif grep -q done "$STAGES/$1" 2>/dev/null ; then
- echo "[*] Notice: stage $1 has been executed already, skipping execution therefore.">&2
+ echo " [*] Notice: stage $1 has been executed already, skipping execution therefore.">&2
return 1
fi
+ echo " Executing stage ${1}"
+ return 0
+}
+
+askpass() {
+ # read -s emulation for dash. result is in $resp.
+ set -o noglob
+ stty -echo
+ read resp
+ stty echo
+ set +o noglob
}
# }}}
# define chroot mirror {{{
chrootmirror() {
- [ -n "$KEEP_SRC_LIST" ] && return
+ if [ -n "$KEEP_SRC_LIST" ] ; then
+ echo "KEEP_SRC_LIST has been set, skipping chrootmirror stage."
+ return
+ fi
+
+ if [ -z "$COMPONENTS" ] ; then
+ COMPONENTS='main contrib non-free'
+ fi
+ echo "Using repository components $COMPONENTS"
+
if [ -n "$ISO" ] ; then
- echo "deb $ISO $RELEASE main contrib" > /etc/apt/sources.list
- [ -n "$CHROOTMIRROR" ] && echo "deb $CHROOTMIRROR $RELEASE main contrib non-free" >> /etc/apt/sources.list
+ echo "Adjusting sources.list for ISO (${ISO})."
+ echo "deb $ISO $RELEASE $COMPONENTS" > /etc/apt/sources.list
+ echo "Adding mirror entry (${MIRROR}) to sources.list."
+ [ -n "$MIRROR" ] && echo "deb $MIRROR $RELEASE $COMPONENTS" >> /etc/apt/sources.list || true
else
- if [ -n "$CHROOTMIRROR" ] ; then
- echo "deb $CHROOTMIRROR $RELEASE main contrib non-free" > /etc/apt/sources.list
+ if [ -n "$MIRROR" ] ; then
+ echo "Adjusting sources.list for mirror (${MIRROR})."
+ echo "deb $MIRROR $RELEASE $COMPONENTS" > /etc/apt/sources.list
fi
fi
+
+ # add security.debian.org:
+ case "$RELEASE" in
+ unstable|sid) ;; # no security pool available
+ *)
+ echo "Adding security.debian.org to sources.list."
+ echo "deb http://security.debian.org ${RELEASE}/updates $COMPONENTS" >> /etc/apt/sources.list
+ ;;
+ esac
}
# }}}
grmlrepos() {
if [ -n "$GRMLREPOS" ] ; then
# user might have provided their own apt sources.list
- if ! grep -q grml /etc/apt/sources.list 2>/dev/null ; then
- cat >> /etc/apt/sources.list << EOF
-
+ if ! grep -q grml /etc/apt/sources.list.d/grml.list 2>/dev/null ; then
+ cat >> /etc/apt/sources.list.d/grml.list << EOF
# grml: stable repository:
deb http://deb.grml.org/ grml-stable main
deb-src http://deb.grml.org/ grml-stable main
# grml: testing/development repository:
deb http://deb.grml.org/ grml-testing main
deb-src http://deb.grml.org/ grml-testing main
-
EOF
fi
- # make sure we have the keys available for aptitude
- gpg --keyserver subkeys.pgp.net --recv-keys F61E2E7CECDEA787
- gpg --export F61E2E7CECDEA787 | apt-key add - || /bin/true # not yet sure
- # why it's necessary, sometimes we get an error even though it works [mika]
+ if apt-get update ; then
+ apt-get -y --allow-unauthenticated install grml-debian-keyring
+ apt-get update
+ else
+ # make sure we have the keys available for aptitude
+ gpg --keyserver subkeys.pgp.net --recv-keys F61E2E7CECDEA787
+ gpg --export F61E2E7CECDEA787 | apt-key add - || true # not yet sure
+ # why it's necessary, sometimes we get an error even though it works [mika]
+ fi
- # make sure we install packages from grml's pool only if not available
+ # make sure we install packages from Grml's pool only if not available
# from Debian!
if ! grep -q grml /etc/apt/preferences 2>/dev/null ; then
cat >> /etc/apt/preferences << EOF
}
# }}}
-# create default devices {{{
-makedev() {
- if ! [ -r /dev/hda20 ] ; then
- echo "Creating generic devices in /dev - this might take a while..."
- cd /dev && MAKEDEV generic
- fi
-}
-# }}}
-
# make sure services do not start up {{{
install_policy_rcd() {
if ! [ -r /usr/sbin/policy-rc.d ] ; then
}
# }}}
+# remove now useless apt cache {{{
+remove_apt_cache() {
+ if [ "$RM_APTCACHE" = 'yes' ] ; then
+ echo "Cleaning apt cache."
+ apt-get clean
+ else
+ echo "Not cleaning apt cache as \$RM_APTCACHE is unset."
+ fi
+}
+# }}}
+
# install additional packages {{{
packages() {
# Pre-seed the debconf database with answers. Each question will be marked
if [ "$PACKAGES" = 'yes' ] ; then
if ! [ -r /etc/debootstrap/packages ] ; then
- echo "Error: /etc/debootstrap/packages not found, exiting."
+ echo "Error: /etc/debootstrap/packages (inside chroot) not found, exiting." >&2
exit 1
else
$APTUPDATE
}
# }}}
-# sarge specific stuff: mkinitrd {{{
-mkinitrd() {
- if [ "$RELEASE" = 'sarge' ] ; then
- sed -i "s#ROOT=probe#ROOT=$TARGET#" /etc/mkinitrd/mkinitrd.conf
- fi
-}
-# }}}
-
# install kernel packages {{{
kernel() {
# do not override $KERNEL if set via config file
if [ -n "$KERNEL" ] ; then
$APTUPDATE
- if [ "$RELEASE" = 'sarge' ] ; then
- KERNELPACKAGES="kernel-image-$KERNEL kernel-headers-$KERNEL"
- else
- KERNELPACKAGES="linux-image-$KERNEL linux-headers-$KERNEL"
- fi
- DEBIAN_FRONTEND=$DEBIAN_FRONTEND $APTINSTALL $KERNELPACKAGES
+ # note: install busybox to be able to debug initramfs
+ KERNELPACKAGES="linux-image-$KERNEL linux-headers-$KERNEL busybox firmware-linux"
+ DEBIAN_FRONTEND=$DEBIAN_FRONTEND $APTINSTALL $KERNELPACKAGES
fi
}
# }}}
reconfigure() {
if [ -n "$RECONFIGURE" ] ; then
for package in $RECONFIGURE ; do
- dpkg --list $package 1>/dev/null 2>/dev/null && \
- DEBIAN_FRONTEND=$DEBIAN_FRONTEND dpkg-reconfigure $package || \
- echo "Warning: $package does not exist, can not reconfigure it."
+ if dpkg --list $package >/dev/null 2>&1 | grep -q '^ii' ; then
+ DEBIAN_FRONTEND=$DEBIAN_FRONTEND dpkg-reconfigure $package || \
+ echo "Warning: $package does not exist, can not reconfigure it."
+ fi
done
fi
}
# set password of user root {{{
passwords()
{
+ if [ -n "$NOPASSWORD" ] ; then
+ echo "Skip setting root password as requested."
+ return 0
+ fi
+
echo "Activating shadow passwords."
shadowconfig on
+ CHPASSWD_OPTION=
+ if chpasswd --help 2>&1 | grep -q -- '-m,' ; then
+ CHPASSWD_OPTION='-m'
+ fi
+
if [ -n "$ROOTPASSWORD" ] ; then
- echo root:"$ROOTPASSWORD" | chpasswd -m
+ echo root:"$ROOTPASSWORD" | chpasswd $CHPASSWD_OPTION
export ROOTPASSWORD=''
else
a='1'
echo "Setting password for user root:"
while [ "$a" != "$b" ] ; do
echo -n "Enter new UNIX password for user root: "
- read -s a
+ askpass
+ a="$resp"
+ unset resp
echo
echo -n "Retype new UNIX password for user root: "
- read -s b
+ askpass
+ b="$resp"
+ unset resp
echo
if [ "$a" != "$b" ] ; then
echo "Sorry, passwords do not match. Retry."
a='1'
b='2'
else
- echo root:"$a" | chpasswd -m
+ echo root:"$a" | chpasswd $CHPASSWD_OPTION
unset a
unset b
fi
# set up /etc/hosts {{{
hosts() {
- if ! [ -f /etc/hosts ] ; then
- echo "Setting up /etc/hosts"
- echo "127.0.0.1 localhost $HOSTNAME" > /etc/hosts
+ if [ -f /etc/hosts ] ; then
+ sed -i "s#127.0.0.1 .*#127.0.0.1 localhost $HOSTNAME#" /etc/hosts
+ [ -n "$HOSTNAME" ] && sed -i "s/grml/$HOSTNAME/g" /etc/hosts
+ else
+ cat > /etc/hosts << EOF
+127.0.0.1 localhost $HOSTNAME
+
+#127.0.0.1 localhost
+#127.0.1.1 $HOSTNAME.example.org $HOSTNAME
+
+# The following lines are desirable for IPv6 capable hosts
+#::1 ip6-localhost ip6-loopback $HOSTNAME
+::1 ip6-localhost ip6-loopback
+fe00::0 ip6-localnet
+ff00::0 ip6-mcastprefix
+ff02::1 ip6-allnodes
+ff02::2 ip6-allrouters
+ff02::3 ip6-allhosts
+EOF
fi
}
# }}}
/sys /sys sysfs noauto,rw,nosuid,nodev,noexec 0 0
/dev/cdrom /mnt/cdrom0 iso9660 ro,user,noauto 0 0
# some other examples:
-# /dev/sda2 none swap sw 0 0
+# /dev/sda2 none swap sw,pri=0 0 0
# /dev/hda1 /Grml ext3 dev,suid,user,noauto 0 2
# //1.2.3.4/pub /smb/pub smbfs defaults,user,noauto,uid=grml,gid=grml 0 0
# linux:/pub /beer nfs defaults 0 0
# tmpfs /tmp tmpfs size=300M 0 0
+# /dev/sda5 none swap sw 0 0
EOF
}
# }}}
# adjust postfix configuration
if [ -r /etc/postfix/main.cf ] ; then
+ # adjust hostname related options:
sed -i "s/grml/$HOSTNAME/g" /etc/postfix/main.cf
+
+ # listen on loopback interface only:
+ sed -i "s/^inet_interfaces = .*/inet_interfaces = loopback-only/" /etc/postfix/main.cf
+ grep -q inet_interfaces /etc/postfix/main.cf || echo 'inet_interfaces = loopback-only' >> /etc/postfix/main.cf
fi
fi
}
# generate initrd/initramfs {{{
initrd() {
# assume the first available kernel as our main kernel
- KERNELIMG=$(ls -1 /boot/vmlinuz-* | head -1)
+ KERNELIMG=$(ls -1 /boot/vmlinuz-* 2>/dev/null | head -1)
+ if [ -z "$KERNELIMG" ] ; then
+ echo 'No kernel image found, skipping initrd stuff.'>&2
+ return
+ fi
+
KERNELVER=${KERNELIMG#/boot/vmlinuz-}
# generate initrd
if [ -n "$INITRD" ] ; then
- if [ "$RELEASE" = 'sarge' ] ; then
- echo "Release sarge detected, will not create an initrd."
- else
- echo "Generating initrd."
- update-initramfs -c -t -k $KERNELVER
- if [ -f "/boot/initrd.img-$KERNELVER" ] ; then
- GRUBINITRD="initrd /boot/initrd.img-$KERNELVER"
- LILOINITRD=" initrd=/boot/initrd.img-$KERNELVER"
- fi
- fi
+ echo "Generating initrd."
+ update-initramfs -c -t -k $KERNELVER
fi
}
# }}}
# grub configuration/installation {{{
-grub() {
- if [ -z "$GROOT" ] ; then
- echo "Warning: \$GROOT is not defined, will not adjust grub configuration therefore."
+grub_install() {
+
+ if [ -z "$GRUB" ] ; then
+ echo "Notice: \$GRUB not defined, will not install grub therefore."
+ return 0
+ fi
+
+ if ! dpkg --list grub-pc 2>/dev/null | grep -q '^ii' ; then
+ echo "Notice: grub option set but no grub-pc package, installing it therefore."
+ DEBIAN_FRONTEND=$DEBIAN_FRONTEND $APTINSTALL grub-pc
+ fi
+
+ if ! [ -x "$(which grub-install)" ] ; then
+ echo "Error: grub-install not available. (Error while installing grub package?)" >&2
+ return 1
+ fi
+
+ if [ -n "$SELECTED_PARTITIONS" ] ; then # using sw-raid
+ for device in $SELECTED_PARTITIONS ; do
+ GRUB="${device%%[0-9]}"
+ echo "Installing grub on ${GRUB}:"
+ grub-install --no-floppy "$GRUB"
+ done
else
- echo "Adjusting grub configuration for use on ${GROOT}."
-
- # copy stage-files to /boot/grub/
- [ -d /boot/grub/ ] || mkdir /boot/grub
- # i386 specific:
- [ -d /usr/lib/grub/i386-pc ] && cp /usr/lib/grub/i386-pc/* /boot/grub/
- # amd64 specific:
- [ -d /usr/lib/grub/x86_64-pc ] && cp /usr/lib/grub/x86_64-pc/* /boot/grub/
- # sarge ships grub files in another directory
- [ "$RELEASE" = 'sarge' ] && cp /lib/grub/i386-pc/* /boot/grub/
-
- # finally install grub
- if [ -x /usr/sbin/update-grub ] ; then
- UPDATEGRUB='/usr/sbin/update-grub'
- else
- UPDATEGRUB='/sbin/update-grub'
- fi
- $UPDATEGRUB -y
- if [ -f /boot/grub/menu.lst ] ; then
- sed -i "s/^# groot=.*/# groot=(${GROOT})/g" /boot/grub/menu.lst
- if [ -n "$TARGET_UUID" ] ; then
- sed -i "s|^# kopt=root=.*|# kopt=root=UUID=${TARGET_UUID} ro ${BOOT_APPEND}|g" /boot/grub/menu.lst
- else
- sed -i "s|^# kopt=root=.*|# kopt=root=${TARGET} ro ${BOOT_APPEND}|g" /boot/grub/menu.lst
- fi
- # not sure why savedefault does not work for me; any ideas?
- sed -i "s/^savedefault.*/# &/g" /boot/grub/menu.lst
- $UPDATEGRUB -y
- fi
+ echo "Installing grub on ${GRUB}:"
+ grub-install --no-floppy "$GRUB"
+ fi
+
+ echo "Adjusting grub configuration for use on ${GRUB}."
+
+ # finally install grub
+ if [ -x /usr/sbin/update-grub ] ; then
+ UPDATEGRUB='/usr/sbin/update-grub'
+ elif [ -x /sbin/update-grub ] ; then
+ UPDATEGRUB='/sbin/update-grub'
+ else
+ echo "Error: update-grub not available, can not execute it." >&2
+ return 1
fi
+
+ $UPDATEGRUB
}
# }}}
services() {
for service in ssh mdadm mdadm-raid ; do
if [ -x /etc/init.d/"$service" ] ; then
- /etc/init.d/"$service" stop || /bin/true
+ /etc/init.d/"$service" stop || true
fi
done
}
# }}}
-# unmount all filesystems in chroot, make sure nothing is left {{{
+# unmount /proc and make sure nothing is left {{{
finalize() {
# make sure we don't leave any sensible data
rm -f /etc/debootstrap/variables
+
[ -n "$POLICYRCD" ] && rm -f /usr/sbin/policy-rc.d
- umount -a 1>/dev/null 2>/dev/null || true
- umount /proc 1>/dev/null 2>/dev/null || true
- umount /proc 1>/dev/null 2>/dev/null || true
- umount -a 1>/dev/null 2>/dev/null || true
+
+ umount /proc >/dev/null 2>/dev/null || true
+}
+# }}}
+
+# signal handler {{{
+signal_handler() {
+ finalize
+ [ -n "$1" ] && EXIT="$1" || EXIT="1"
+ exit "$EXIT"
}
# }}}
+# set signal handler {{{
+trap signal_handler HUP INT QUIT TERM
+# }}}
+
# execute the functions {{{
- for i in chrootmirror grmlrepos kernelimg_conf makedev install_policy_rcd \
- packages extrapackages mkinitrd kernel reconfigure hosts interfaces \
- timezone fstab hostname initrd grub passwords custom_scripts \
- services finalize ; do
+
+ # always execute install_policy_rcd
+ install_policy_rcd
+
+ for i in chrootmirror grmlrepos kernelimg_conf \
+ kernel packages extrapackages reconfigure hosts interfaces \
+ timezone fstab hostname initrd grub_install passwords \
+ custom_scripts remove_apt_cache services ; do
if stage $i ; then
$i && stage $i done || exit 1
fi
done
+ # always execute the finalize stage:
+ finalize
# }}}
# finally exit the chroot {{{