-grml2usb (0.9.10) UNRELEASED; urgency=low
+grml2usb-compat (0.9.13) unstable; urgency=low
- * Support the directory where the grml2usb script resides as base
- directory so /usr/share/grml2usb isn't necessarily needed.
- Thanks for the patch to Alexander 'Leo' Bergolth <leo@strike.wu.ac.at>!
- * Make sure grub.conf isn't a symlink but a plain file instead,
- otherwise it will break on FAT16 filesystems. This works around
- grub-install of (at least) Fedora 10.
- Thanks for the patch to Alexander 'Leo' Bergolth <leo@strike.wu.ac.at>!
- * Use 'pci=nomsi' in failsafe bootoption. Thanks to Marc 'HE' Brockschmidt.
- * Mention the --syslinux option if grub-install fails.
-
- -- Michael Prokop <mika@grml.org> Mon, 07 Sep 2009 15:21:39 +0200
-
-grml2usb (0.9.9) unstable; urgency=low
-
- * Use ascii.pf2 as grub2 font, since grub2 (1.96+20090307-1)
- the old ascii.pff isn't available anymore.
- * Use terminal_output if available, otherwise fallback to old
- older 'terminal'-command (thanks to Felix Zielcke for helping).
- * Document the 'grub-setup fails after Attempting to install GRUB
- to a partition instead of the MBR' issue.
- * Use "set gfxpayload=1024x768x16,1024x768" instead of vga=791 in
- grub2 configuration. This requires a recent version of the linux
- loader as the new linux loader loads the kernel at 32bit entry point
- and not at 16 bit anymore so it has to be translated for the Linux
- kernel (as the kernel parses vga= in 16 bit code). In the long run
- we don't seem to have another option, so let's change it.
- Thanks to Felix Zielcke and Robert Millan for first hand information.
- * Increase timeout from 5 to 10 seconds in grub2 configuration.
- * Load memtest86+ binary via 'linux16' in grub2 (otherwise it fails).
- * Drop the serial boot entry from grub2 (I assume users with usb
- pens don't need that option).
- * Change the way MirOS bsd4grml is loaded (use the fallback method
- as default).
- * Improve descriptions of grml's grub2 entries.
- * Bump Standards-Version to 3.8.3 (no further changes).
- * Fix creation and installation of grub1's configuration file (menu.lst).
- Thanks to Mario 'BitKoenig' Holbe.
-
- -- Michael Prokop <mika@grml.org> Tue, 25 Aug 2009 23:53:51 +0200
-
-grml2usb (0.9.8) unstable; urgency=low
-
- * Support installation on /dev/loop*-devices.
- * Generate configuration for syslinux and grub by default, no
- matter which bootloader the users chooses.
- * Added options --skip-syslinux-config and --skip-grub-config
- if someone wants to skip the generation of any bootloader
- configuration files.
- * Make sure grub-install is available before executing it.
- * Display information about default grml flavour and the other
- available grml flavours at the end of the grml2usb run.
- * Use /sbin/blkid (e2fsprogs) instead of vol_id as vol_id is going to be
- removed from udev. Thanks for the patch to Andras Korn!
- * Use rsync instead of cp. Thanks for the patch to Andras Korn!
- [Closes: issue683]
- * Use 'forensic' and 'readonly' in the forensic bootoption itself.
- * Spelling fixes (thanks to Thorsten Glaser <tg@mirbsd.org>).
- * Write GRUB2 config even if the target is a directory (thanks, Thorsten)
- * All these "set root=" are not needed for GRUB2 (thanks, Thorsten)
- * Switch order of check whether the specified device is a directory
- and check for usb device (as the usb device check will fail if
- it's a directory).
- * Add grml2iso for creating a bootable DVD:
- - thanks once more to Thorsten Glaser for helping and patches
- - thanks to Ernesto Domato for reporting the issue regarding
- i386<->amd64 with grub-mkimage
- * Move syslinux check to install_syslinux_mbr()
- * Drop the reference to --grub option (thanks for the bugreport
- to Peter Palfrader)
- * Update documentation:
- - mention the dd approach
- - mention grml2iso
- - improve section link names for the online version
- - add 'grub-probe: error: unknown filesystem'
- * Support use with python version 2.4.
- * Bump Standard Version to 3.8.2 (no further changes).
- * Depend on debhelper >=5 (using compat version 5).
-
- -- Michael Prokop <mika@grml.org> Tue, 21 Jul 2009 18:01:50 +0200
-
-grml2usb (0.9.7) unstable; urgency=low
-
- * Fix typo in manpage of grml2usb (thanks to Wernfried Haas).
- * Fix bootoption toram: it should be toram=$FLAVOUR.squashfs instead
- of toram=$FLAVOUR. Thanks to Wernfried Haas and Frank Prochnow
- for the bugreport and debugging! [Closes: issue680]
-
- -- Michael Prokop <mika@grml.org> Tue, 02 Jun 2009 23:32:13 +0200
-
-grml2usb (0.9.6) unstable; urgency=low
-
- * Support installation of the currently running grml live
- system ("grml2usb /live/image /dev/sdx1").
- * Add "persistent" entry to grub/syslinux menu. [Closes: issue669]
-
- -- Michael Prokop <mika@grml.org> Wed, 20 May 2009 19:32:02 +0200
-
-grml2usb (0.9.5) unstable; urgency=low
-
- * Fix dashes of options in manpage (thanks for the bugreport,
- Thorsten Glaser).
- * Display program version during execution.
- * Apply fix by Peter Daum <gator@cs.tu-berlin.de>, making sure
- to use the normalized path for unmounting. Thanks!
- * Use 'multiboot' for booting MirOS BSD when using grub2.
- * Catch exception if copying files fails.
- * Make sure to exit if installing grub fails.
- * Integrate hdt (Hardware Detection Tool) in bootsplash (but
- only if using syslinux as grub isn't supported).
-
- -- Michael Prokop <mika@grml.org> Mon, 04 May 2009 22:31:30 +0200
-
-grml2usb (0.9.4) unstable; urgency=low
-
- * Bugfix: move kernel commandline from initrd to kernel option in
- generate_flavour_specific_grub2_config().
-
- -- Michael Prokop <mika@grml.org> Thu, 09 Apr 2009 00:04:56 +0200
-
-grml2usb (0.9.3) unstable; urgency=low
-
- * Drop some leftover 'lang=us' references.
- * Update mbr.S (thanks, Thorsten Glaser).
- * Rename --mbr-manager into --mbr-menu (people seem to be confused
- what this option does). Improve the according documentation.
- * Update failsafe bootoption.
- * Fix comments section in manpage (thanks for reporting,
- Alexander Steinböck).
- * Mention the Debian package in the error message (thanks to
- Lothar Speil for the bugreport).
- * Mention grml-repository in the docs.
- * Support older kernel versions in check for removable usb device.
- (Thanks to Ralf Gross for the report and relevant information.)
- * Also add specified bootoptions to default entry in configuration
- file of grub version 1. (Thanks to Ralf Gross for the bugreport.)
- * Make sure that options "--quiet" and "--verbose" aren't accepted
- at the same time in the command line. Thanks for bugreport and
- code example, Karl Voit!
- * Bump Standard Version to 3.8.1 (no further changes).
- * Set debhelper's compat version from 4 to 5.
-
- -- Michael Prokop <mika@grml.org> Wed, 08 Apr 2009 00:09:46 +0200
-
-grml2usb (0.9.2) unstable; urgency=low
-
- * Rewrote grml2usb from scratch (in python). New features:
- - you no longer need to setup the device via /etc/fstab, just
- directly invoke "grml2usb /path/to/iso /dev/sdb1"
- - initial multi-iso / multi-boot support
- [Closes: issue501] [Closes: issue584]
- - provide *several* new options like --bootloader-only,
- --bootoptions=... check out the manpage for all the details
- - get rid of "polution" of root directory on usb-pen
- [Closes: issue466]
- - always write a default MBR (thanks a lot to the work
- and help of Thorsten Glaser!) [Closes: issue295]
- - use grub by default (but support for syslinux is present as
- well of course)
- - fix regressions for temporary mountpoints / wrong directories
- [Closes: issue603] [Closes: issue602]
- * Update debian stuff:
- - Bump Standard Version to 3.8.0 (no further changes)
- - Change XS-Vcs-* to Vcs-* headers and replace mercurial with
- grml's nowadays git repository URLs
- - drop mtools from depends
- - slightly improve long description
- - add asciidoc, xsltproc and docbook-xsl to Build-Depends
- - either depend on syslinux | grub2 | grub
-
- -- Michael Prokop <mika@grml.org> Mon, 02 Mar 2009 16:40:55 +0100
-
-grml2usb (0.9.1) unstable; urgency=low
-
- * Fix problem with comment chars in /etc/fstab.
- Thanks for debugging and the patch to Robert Euhus!
- * Some minor cleanups in Debian packaging.
-
- -- Michael Prokop <mika@grml.org> Sun, 25 May 2008 01:29:30 +0200
-
-grml2usb (0.9.0) unstable; urgency=low
-
- * Support new directory layout of different grml-flavours
- * Fix uninstall option (really clean up usb device)
-
- -- Michael Prokop <mika@grml.org> Sat, 23 Feb 2008 23:43:57 +0100
-
-grml2usb (0.8.0) unstable; urgency=low
-
- * Fix the "mv: cannot move `/mnt/usb-sdb1/boot/grub' to a subdirectory of
- itself, `/mnt/usb-sdb1/grub'" issue.
-
- -- Michael Prokop <mika@grml.org> Sat, 19 Jan 2008 16:57:08 +0100
-
-grml2usb (0.7.8) unstable; urgency=low
-
- * Adjust grml2usb for a present grub directory.
-
- -- Michael Prokop <mika@grml.org> Fri, 16 Nov 2007 08:29:20 +0100
-
-grml2usb (0.7.7) unstable; urgency=low
-
- * Improve error handling for execution of syslinux.
-
- -- Michael Prokop <mika@grml.org> Thu, 13 Sep 2007 01:38:31 +0200
-
-grml2usb (0.7.6) unstable; urgency=low
-
- * The "reworked grml2usb for JUXLALA"-release.
- * Added fs check via vol_id.
- * Improved error handling.
- * Fixed some code parts regarding use of $TMPMNT.
-
- -- Michael Prokop <mika@grml.org> Fri, 08 Jun 2007 18:07:09 +0200
-
-grml2usb (0.7.5) unstable; urgency=low
-
- * supporting directories and direct blockdevices as source for the iso.
-
- -- Michael Gebetsroither <gebi@grml.org> Tue, 03 Apr 2007 23:28:19 +0200
-
-grml2usb (0.7.4) unstable; urgency=low
-
- * Get rid of bashism, thanks for reporting - Paul Weaver!
- * Change version schema from x.y-z to x.y.z.
-
- -- Michael Prokop <mika@grml.org> Fri, 16 Mar 2007 14:43:49 +0100
-
-grml2usb (0.7-3) unstable; urgency=low
-
- * The manpage was just a template, added the missing documentation
- now. Thanks for reporting, Jens Heidrich!
-
- -- Michael Prokop <mika@grml.org> Sat, 3 Feb 2007 11:08:30 +0100
-
-grml2usb (0.7-2) unstable; urgency=low
-
- * Use 'Architecture: all' in debian/control so we can use the
- package on non-x86 as well.
- * Bumb Standard Version to 3.7.2 (no further changes).
-
- -- Michael Prokop <mika@grml.org> Sat, 11 Nov 2006 12:46:35 +0100
-
-grml2usb (0.7-1) unstable; urgency=low
-
- * Use different exit codes for different code parts, and quote
- $ISO, thanks - Richard Hartmann!
- * Remove unused configure lines in debian/rules.
-
- -- Michael Prokop <mika@grml.org> Mon, 6 Nov 2006 23:48:46 +0100
-
-grml2usb (0.6-1) unstable; urgency=low
-
- * Allow overwriting of $TMPMNT.
-
- -- Michael Prokop <mika@grml.org> Wed, 4 Oct 2006 22:50:58 +0200
-
-grml2usb (0.5-1) unstable; urgency=low
-
- * bailout if mounting of target device failes.
-
- -- Michael Prokop <mika@grml.org> Mon, 11 Sep 2006 23:47:01 +0200
-
-grml2usb (0.4-1) unstable; urgency=low
-
- * Check for existence of syslinux before running the script.
- * Updated copyright file (new fsfs address).
-
- -- Michael Prokop <mika@grml.org> Sat, 3 Jun 2006 21:02:53 +0200
-
-grml2usb (0.3-1) unstable; urgency=low
-
- * Added uninstall option.
- * Improved error handling and its output.
- * Added colors to improve manual text parsing.
-
- -- Michael Prokop <mika@grml.org> Fri, 10 Mar 2006 20:19:28 +0100
-
-grml2usb (0.2-1) unstable; urgency=low
-
- * Improved usage information.
-
- -- Michael Prokop <mika@grml.org> Tue, 10 Jan 2006 09:35:20 +0100
-
-grml2usb (0.1-3) unstable; urgency=low
-
- * Changed 'cp -a' to 'cp -dR --preserve=mode,timestamps' so we don't
- get the ownership-permission-warnings.
-
- -- Michael Prokop <mika@grml.org> Fri, 2 Sep 2005 18:02:22 +0200
-
-grml2usb (0.1-2) unstable; urgency=low
-
- * Fixed small typo (SYSDEV/TMPDEV) [thanks for hint, tklauser!].
-
- -- Michael Prokop <mika@grml.org> Wed, 17 Aug 2005 21:50:32 +0200
-
-grml2usb (0.1-1) unstable; urgency=low
-
- * Initial release.
-
- -- Michael Prokop <mika@grml.org> Sun, 14 Aug 2005 15:31:04 +0200
+ * Initial release (based on grml2usb 0.9.13, git commit
+ d6075913d11383b10d64eff50b1bd77a735a6726).
+ -- Michael Prokop <mika@grml.org> Wed, 21 Oct 2009 22:22:37 +0200