" Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
" Bug-Reports: see http://grml.org/bugs/
" License: This file is licensed under the GPL v2.
-" Latest change: Mon Dez 24 21:07:04 CET 2007 [mika]
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" All system-wide defaults are set in $VIMRUNTIME/debian.vim (usually just
" This line should not be removed as it ensures that various options are
" properly set to work with the Vim-related packages available in Debian.
- runtime! debian.vim
+runtime! debian.vim
-" Uncomment the next line to make Vim more Vi-compatible
-" NOTE: debian.vim sets 'nocompatible', but only if debian.vim is available,
-" so let's make sure we run in nocompatible mode:
+" | Begin of defaults.vim related stuff {
+" |
+" | Comments starting with a bar ('|') are added by the Grml-Team
+" | and the settings below override the default.vim configuration everything
+" | else is copied from $VIMRUNTIME/defaults.vim.
+" |
+" | Do *not* source $VIMRUNTIME/defaults.vim (in case no user vimrc is found),
+" | since that prevents overwriting values we want to set in this file,
+" | instead we set settings similar to what can be found in default.vim below
+let g:skip_defaults_vim=1
+
+" Use Vim settings, rather than Vi settings (much better!).
+" This must be first, because it changes other options as a side effect.
+" Avoid side effects when it was already reset.
+if &compatible
set nocompatible
+endif
-" Setting 'compatible' changes numerous
-" options, so any other options should be set AFTER setting 'compatible'.
-" set compatible
+" When the +eval feature is missing, the set command above will be skipped.
+" Use a trick to reset compatible only when the +eval feature is missing.
+silent! while 0
+ set nocompatible
+silent! endwhile
- set backspace=indent,eol,start " more powerful backspacing
+" Allow backspacing over everything in insert mode.
+set backspace=indent,eol,start
-" Now we set some defaults for the editor
- set autoindent " always set autoindenting on
-" set linebreak " Don't wrap words by default
- set textwidth=0 " Don't wrap lines by default
- set nobackup " Don't keep a backup file
- set backupcopy=no " grml: Overwrite files/links with w!
-" set backupcopy=yes " Keep a backup file
- set viminfo='20,\"50 " read/write a .viminfo file, don't store more than
- " 50 lines of registers
- set history=50 " keep 50 lines of command line history
- set ruler " show the cursor position all the time
+set history=200 " keep 200 lines of command line history
+set ruler " show the cursor position all the time
+set showcmd " display incomplete commands
+set wildmenu " display completion matches in a status line
-" Suffixes that get lower priority when doing tab completion for filenames.
-" These are files we are not likely to want to edit or read.
- set suffixes=.bak,~,.swp,.o,.info,.aux,.log,.dvi,.bbl,.blg,.brf,.cb,.ind,.idx,.ilg,.inx,.out,.toc
+set ttimeout " time out for key codes
+set ttimeoutlen=100 " wait up to 100ms after Esc for special key
-" Vim5 and later versions support syntax highlighting.
-" Just load the main syntax file when Vim was compiled with "+syntax".
- if has("syntax")
- syntax on
- endif
+" Show @@@ in the last line if it is truncated.
+set display=truncate
-" Debian uses compressed helpfiles. We must inform vim that the main
-" helpfiles is compressed. Other helpfiles are stated in the tags-file.
-" set helpfile=$VIMRUNTIME/doc/help.txt.gz
+" Show a few lines of context around the cursor. Note that this makes the
+" text scroll if you mouse-click near the start or end of the window.
+set scrolloff=5
-" If using a dark background within the editing area and syntax highlighting
-" turn on this option as well
- set background=dark
+" Do incremental searching when it's possible to timeout.
+if has('reltime')
+ set incsearch
+endif
-" begin of grml specials:
-" set list listchars=tab:»·
-" set listchars=eol:$,precedes:«,extends:»,tab:··,trail:·
-" end of grml specials
+" Do not recognize octal numbers for Ctrl-A and Ctrl-X, most users find it
+" confusing.
+set nrformats-=octal
-" Uncomment the following to have Vim jump to the last position when
-" reopening a file
-" if has("autocmd")
-" au BufReadPost * if line("'\"") > 0 && line("'\"") <= line("$")
-" \| exe "normal g'\"" | endif
-" endif
+" For Win32 GUI: remove 't' flag from 'guioptions': no tearoff menu entries.
+if has('win32')
+ set guioptions-=t
+endif
-" Uncomment the following to have Vim load indentation rules according to the
-" detected filetype. Per default Debian Vim only load filetype specific
-" plugins.
- if has("autocmd")
- filetype indent on
- endif
+" Don't use Ex mode, use Q for formatting.
+" Revert with ":unmap Q".
+map Q gq
+
+" CTRL-U in insert mode deletes a lot. Use CTRL-G u to first break undo,
+" so that you can undo CTRL-U after inserting a line break.
+" Revert with ":iunmap <C-U>".
+inoremap <C-U> <C-G>u<C-U>
+
+" In many terminal emulators the mouse works just fine. By enabling it you
+" can position the cursor, Visually select and scroll with the mouse.
+"
+" | We prefer to disable the mouse usage though and use what we're used
+" | from older Vim versions.
+" |
+" | if has('mouse')
+" | set mouse=a
+" | endif
+if has('mouse')
+ set mouse=
+endif
+
+" Switch syntax highlighting on when the terminal has colors or when using the
+" GUI (which always has colors).
+if &t_Co > 2 || has("gui_running")
+ " Revert with ":syntax off".
+ syntax on
+
+ " I like highlighting strings inside C comments.
+ " Revert with ":unlet c_comment_strings".
+ let c_comment_strings=1
+endif
+
+" Only do this part when Vim was compiled with the +eval feature.
+if 1
+
+ " Enable file type detection.
+ " Use the default filetype settings, so that mail gets 'tw' set to 72,
+ " 'cindent' is on in C files, etc.
+ " Also load indent files, to automatically do language-dependent indenting.
+ " Revert with ":filetype off".
+ filetype plugin indent on
+
+ " Put these in an autocmd group, so that you can revert them with:
+ " ":augroup vimStartup | au! | augroup END"
+ augroup vimStartup
+ au!
+
+ " When editing a file, always jump to the last known cursor position.
+ " Don't do it when the position is invalid, when inside an event handler
+ " (happens when dropping a file on gvim) and for a commit message (it's
+ " likely a different one than last time).
+ autocmd BufReadPost *
+ \ if line("'\"") >= 1 && line("'\"") <= line("$") && &ft !~# 'commit'
+ \ | exe "normal! g`\""
+ \ | endif
+
+ augroup END
+
+endif
+
+" Convenient command to see the difference between the current buffer and the
+" file it was loaded from, thus the changes you made.
+" Only define it when not defined already.
+" Revert with: ":delcommand DiffOrig".
+if !exists(":DiffOrig")
+ command DiffOrig vert new | set bt=nofile | r ++edit # | 0d_ | diffthis
+ \ | wincmd p | diffthis
+endif
+
+if has('langmap') && exists('+langremap')
+ " Prevent that the langmap option applies to characters that result from a
+ " mapping. If set (default), this may break plugins (but it's backward
+ " compatible).
+ set nolangremap
+endif
+
+" | End of defaults.vim related stuff }
+
+" Begin of custom Grml configuration {
+" The Grml-Team believes that the options and configuration values which override
+" the Vim defaults are useful and helpful for our users.
+"
+" A lot of options are Grml defaults since the very start and we cleaned up as
+" much as possible but if you do not like any of these settings feel free to
+" change them back in your user vimrc or file a bug and tell us to change the
+" default.
+"
+" The idea behind commented out options and configuration values is to show
+" you interesting settings you should know about but we did not set them by
+" default because they might have to much of an impact for everyone.
+"
+" If a commented option precedes an option set by us it usually shows the
+" Vim default.
+
+ set autoindent " always set autoindenting on
+ set dictionary=/usr/share/dict/words " used with CTRL-X CTRL-K
+ set esckeys " recognize keys that start with <Esc> in insert mode
+ set formatoptions=cqrt " list of flags that tell how automatic formatting works
+ set laststatus=2 " when to use a status line for the last window
+ set nobackup " don't keep a backup file
+ set noerrorbells " don't ring the bell (beep or screen flash) for error messages
+ set nostartofline " keep cursor in the same column (if possible) when moving cursor
+ set pastetoggle=<f11> " don't change text when copy/pasting
+ set shortmess=at " list of flags to make messages shorter
+ set showmatch " show matching brackets.
+ set textwidth=0 " don't wrap lines by default
+ set viminfo=%,'100,<100,s10,h " what to store in .viminfo file
+ set visualbell " use a visual bell instead of beeping
+ set whichwrap=<,>,h,l " list of flags specifying which commands wrap to another line
+
+" set expandtab " Use appropriate number of spaces to insert a <Tab>
+" set linebreak " Don't wrap words by default
+ set ignorecase " Do case insensitive matching
+ set smartcase " Do smart case matching
+" set autowrite " Automatically save before commands like :next and :make
+" set nodigraph " enter characters that normally cannot be entered by an ordinary keyboard
+
+" list of strings used for list mode
+" set list listchars=eol:$
+ set listchars=eol:$,precedes:«,extends:»,tab:»·,trail:·
+
+" list of file names to search for tags
+" set tags=./tags,tags
+ set tags=./tags,./TAGS,tags,TAGS,../tags,../../tags,../../../tags,../../../../tags
-" The following are commented out as they cause vim to behave a lot
-" differently from regular Vi. They are highly recommended though.
- set showcmd " Show (partial) command in status line.
- set showmatch " Show matching brackets.
-" set ignorecase " Do case insensitive matching
-" set smartcase " Do smart case matching
-" set incsearch " Incremental search
-" set autowrite " Automatically save before commands like :next and :make
" When switching between different buffers you can't use undo without 'set hidden':
- set hidden " Hide buffers when they are abandoned
-" set mouse=a " Enable mouse usage (all modes) in terminals
- set wildmenu " command-line completion operates in an enhanced mode
+ set hidden " Hide buffers when they are abandoned
- set pastetoggle=<f11> " don't change text when copy/pasting
- set dictionary=/usr/share/dict/word " used with CTRL-X CTRL-K
+" Suffixes that get lower priority when doing tab completion for filenames.
+" These are files we are not likely to want to edit or read.
+" set suffixes=.bak,~,.o,.h,.info,.swp,.obj
+ set suffixes=.bak,~,.o,.h,.info,.swp,.obj,.aux,.log,.dvi,.bbl,.blg,.brf,.cb,.ind,.idx,.ilg,.inx,.out,.toc
-""" set the screen hardstatus to vim(filename.ext)
+" set the screen hardstatus to vim(filename.ext)
if ((&term =~ '^screen') && ($VIM_PLEASE_SET_TITLE =~ '^yes$') || has('gui_running'))
set t_ts=\ek
set t_fs=\e\
set title
- autocmd BufEnter * let &titlestring = "vim(" . expand("%:t") . ")"
+ if has("autocmd")
+ autocmd BufEnter * let &titlestring = "vim(" . expand("%:t") . ")"
+ endif
let &titleold = fnamemodify(&shell, ":t")
endif
+" autocommands:
+ if has("autocmd")
+ " when the file type is "mail" then set the textwidth to "70":
+ autocmd FileType mail set tw=70
+ endif
+
+" some useful mappings:
+
+" remove/delete trailing whitespace:
+ nmap ;tr :%s/\s\+$//
+ vmap ;tr :s/\s\+$//
+
+" execute the command in the current line (minus the first word, which
+" is intended to be a shell prompt) and insert the output in the buffer
+ map ,e ^wy$:r!\12"\r
+
+" update timestamp
+ iab YDATE <C-R>=strftime("%a %b %d %T %Z %Y")<CR>
+ map ,L 1G/Latest change:\s*/e+1<CR>CYDATE<ESC>
+
+" Vim 7 brings cool new features - see ':he version7'!
+" The coolest features of Vim7 by mika
+" ====================================
+" 1) omni/intellisense completion: use CTRL-X CTRL-O in insert mode to start it [:he compl-omni]
+" 2) internal grep: vimgrep foo bar [:he vimgrep]
+" 3) tab pages: vim -p file1 file2 - then use the :tab command [:he tabpage]
+" gt -> next tab
+" gT -> previous tab
+" 4) undo branches: :undolist / :earlier 2h / :later 2h
+" instead of using u (undo) and CTRL-R (redo), you might experiment with g-
+" and g+ to move through the text state [:he undolist]
+" 5) browse remote directories via scp using netrw plugin: :edit scp://host//path/to/ [:he netrw.vim]
+" 6) start editing the filename under the cursor and jump to the line
+" number following the file name: press gF [:he gF]
+" 7) press 'CTRL-W F' to start editing the filename under the cursor in a new
+" window and jump to the line number following the file name. [:he CTRL-W_F]
+" 8) spelling correction (see later for its configuration) [:he spell]:
+" ]s -> Move to next misspelled word after the cursor.
+" zg -> Add word under the cursor as a good word to the first name in 'spellfile'
+" zw -> Like "zg" but mark the word as a wrong (bad) word.
+" z= -> For the word under/after the cursor suggest correctly spelled words.
+" 9) highlight active cursor line using 'set cursorline' [:he cursorline]
+" 10) delete inner quotes inside HTML-code using <C-O>cit (see its mapping later) [:he tag-blocks]
+"
+if version >= 700
+ " Thanks for some ideas to Christian 'strcat' Schneider and Julius Plenz
+ " turn spelling on by default:
+ " set spell
+ " toggle spelling with F12 key:
+ map <F12> :set spell!<CR><Bar>:echo "Spell Check: " . strpart("OffOn", 3 * &spell, 3)<CR>
+ set spellfile=~/.vim/spellfile.add
+ " change language - get spell files from http://ftp.vim.org/pub/vim/runtime/spell/ =>
+ " cd ~/.vim/spell && wget http://ftp.vim.org/pub/vim/runtime/spell/de.{latin1,utf-8}.spl
+ " change to german:
+ " set spelllang=de
+ " highlight spelling correction:
+ " highlight SpellBad term=reverse ctermbg=12 gui=undercurl guisp=Red " badly spelled word
+ " highlight SpellCap term=reverse ctermbg=9 gui=undercurl guisp=Blue " word with wrong caps
+ " highlight SpellRare term=reverse ctermbg=13 gui=undercurl guisp=Magenta " rare word
+ " highlight SpellLocale term=underline ctermbg=11 gui=undercurl guisp=DarkCyan " word only exists in other region
+
+ " set maximum number of suggestions listed top 10 items:
+ set spellsuggest=best,10
+
+ " highlight matching parens:
+ " set matchpairs=(:),[:],{:},< :>
+ " let loaded_matchparen = 1
+ " highlight MatchParen term=reverse ctermbg=7 guibg=cornsilk
+
+ " highlight the cursor line and column:
+ " set cursorline
+ " highlight CursorLine term=reverse ctermbg=7 guibg=#333333
+ " highlight CursorColumn guibg=#333333
+
+ " change inner tag - very useful e.g. within HTML-code!
+ " ci" will remove the text between quotes, also works for ' and `
+ imap <F10> <C-O>cit
+
+ " use the popup menu also when there is only one match:
+ " set completeopt=menuone
+ " determine the maximum number of items to show in the popup menu for:
+ set pumheight=7
+ " set completion highlighting:
+ " highlight Pmenu ctermbg=13 guifg=Black guibg=#BDDFFF " normal item
+ " highlight PmenuSel ctermbg=7 guifg=Black guibg=Orange " selected item
+ " highlight PmenuSbar ctermbg=7 guifg=#CCCCCC guibg=#CCCCCC " scrollbar
+ " highlight PmenuThumb cterm=reverse gui=reverse guifg=Black guibg=#AAAAAA " thumb of the scrollbar
+endif
+
+" To enable persistent undo uncomment following section.
+" The undo files will be stored in $HOME/.cache/vim
+
+" if version >= 703
+" " enable persistent-undo
+" set undofile
+"
+" " store the persistent undo file in ~/.cache/vim
+" set undodir=~/.cache/vim/
+"
+" " create undodir directory if possible and does not exist yet
+" let targetdir=$HOME . "/.cache/vim"
+" if isdirectory(targetdir) != 1 && getftype(targetdir) == "" && exists("*mkdir")
+" call mkdir(targetdir, "p", 0700)
+" endif
+" endif
+
" Source a global configuration file if available
-" Deprecated by Debian but still supported by grml
if filereadable("/etc/vim/vimrc.local")
source /etc/vim/vimrc.local
endif
-" EOF
+
+" source user-specific local configuration file
+"
+" NOTE: If this vimrc file is used as system vimrc the initialization of Vim looks like this:
+"
+" `system-vimrc (this file) + /etc/vim/vimrc.local + $HOME/.vimrc.local -> user-vimrc`
+"
+" This means that user-vimrc overrides the settings set in `$HOME/.vimrc.local`.
+"
+" If this file is used as user-vimrc the initialization of Vim looks like this
+"
+" `system-vimrc + /etc/vim/vimrc.local -> user-vimrc (this file) + /etc/vim/vimrc.local + $HOME/.vimrc.local`
+"
+" This means that `/etc/vim/vimrc.local` + `$HOME/.vimrc.local` overrides the
+" settings set in the user-vimrc (and `/etc/vim/vimrc.local` is sourced twice).
+"
+" Either way, this might or might not be something a user would expect.
+ if filereadable(expand("$HOME/.vimrc.local"))
+ source $HOME/.vimrc.local
+ endif
+
+" End of custom Grml configuration }
+
+"# END OF FILE #################################################################
projects / grml-etc-core.git / blobdiff