# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
# Bug-Reports: see http://grml.org/bugs/
# License: This file is licensed under the GPL v2.
-# Latest change: Wed Aug 27 01:46:13 CEST 2008 [mika]
################################################################################
# http://www.debian.org/releases/stable/i386/index.html.en
"
}
-if [ "$1" = '-h' ] || [ "$1" == '-help' ] ; then
+if [ "$1" = '-h' ] || [ "$1" = '-help' ] ; then
usage
echo 'Please notice that this script requires root permissions!'
exit 0
done
# }}}
+# welcome screen {{{
+welcome_dialog()
+{
+ dialog --title "$PN" --yesno "Welcome to the interactive configuration of ${PN}.
+Do you want to continue installing Debian using this frontend?" 0 0
+}
+# }}}
+
# ask for target {{{
prompt_for_target()
{
OIFS="$IFS"; IFS=:
- [[ $TARGET == *md* ]] && MBRPART=$TARGET || MBRPART="${TARGET%[0-9]}"
+ if echo $TARGET | grep -q "*md*" ; then
+ MBRPART=$TARGET
+ else
+ MBRPART="${TARGET%[0-9]}"
+ fi
GETMBR=$(dialog --stdout --title "$PN" --default-item mbr \
--menu "Where do you want to install the bootmanager grub?" 0 0 0 \
mbr "install bootmanager into MBR of $MBRPART" \
partition "install bootmanager into partition $TARGET" \
- nowhere "do NOT install bootmanager at all" \
+ nowhere "do not install bootmanager at all" \
${ADDITIONAL_PARAMS})
[ $? -eq 0 ] || bailout 3
IFS="$OIFS"
case "$GETMBR" in
mbr)
- USE_MBR=1
# /dev/md0: has to be installed in MBR of /dev/md0 and not in /dev/md:
- if [[ $TARGET == *md* ]] ; then
- BOOT_PARTITION=${TARGET}
+ if echo $TARGET | grep -q "*md*" ; then
+ BOOT_PARTITION="${TARGET}"
else
- BOOT_PARTITION=${TARGET%[0-9]}
+ BOOT_PARTITION="${TARGET%[0-9]}"
fi
;;
partition)
BOOT_PARTITION="$TARGET"
;;
hda)
- USE_MBR=1
BOOT_PARTITION="/dev/hda"
;;
sda)
- USE_MBR=1
BOOT_PARTITION="/dev/sda"
;;
- none)
+ nowhere)
BOOT_PARTITION=''
;;
- *)
- BOOT_PARTITION="$GETMBR"
- ;;
esac
}
# }}}
}
# }}}
-# get grub's syntax for /dev/ice
-# usage example: 'grubdevice /dev/hda2' returns '(hd0,1)'
+# get grub's syntax for /dev/ice {{{
+# usage example: 'grubdevice /dev/sda2' returns 'hd0,1'
grubdevice() {
if [ -z "$1" ] ; then
echo "Usage: grubdevice <device>">&2
echo 'quit' | grub --device-map="$device_map" 1>/dev/null 2>&1
fi
- # taken from d-i's trunk/packages/arch/i386/grub-installer/grub-installer:
+ # based on code from d-i's trunk/packages/arch/i386/grub-installer/grub-installer:
tmp_disk=`echo "$device" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' \
-e 's%\(fd[0-9]*\)$%\1%' \
-e 's%/part[0-9]*$%/disc%' \
-e 's%.*/\(disc\|part\([0-9]*\)\)$%\2%' \
-e 's%.*c[0-7]d[0-9]*p*%%'`
tmp_drive=$(grep -v '^#' $device_map | grep "$tmp_disk *$" | sed 's%.*\([hf]d[0-9][a-g0-9,]*\).*%\1%')
- GRUB="$(echo "$tmp_drive")"
case $1 in
/dev/[sh]d[a-z]) # we expect something like 'hd0'
- GROOT="$(echo "$tmp_drive")"
+ echo "$tmp_drive"
;;
*) # we expect something like 'hd0,0'
- # make sure we don't install into MBR if $USE_MBR is not set
- if [ -z "$USE_MBR" ] ; then
- GROOT="$(echo "$tmp_drive" | sed "s%)$%,`expr $tmp_part - 1`)%")"
- else
- GROOT="$(echo "$tmp_drive" | sed "s%,[0-9]%%")"
- fi
+ echo "$tmp_drive" | sed "s%$%,`expr $tmp_part - 1`%" # FIXME => md0
;;
esac
}
+# }}}
+
+# software raid setup {{{
+config_swraid_setup()
+{
+TMPFILE=$(mktemp)
+RAIDLEVEL=$(dialog --stdout --title "$PN" --default-item raid1 \
+ --menu "Which RAID level do you want to use?" 0 0 0 \
+ raid1 "Software RAID level 1" \
+ raid5 "Software RAID level 5")
+[ $? -eq 0 ] || bailout 20
+
+MD_LIST=$(for i in $(seq 0 9) ; do
+ awk '{print $4}' /proc/partitions | grep md$i /proc/partitions || \
+ echo "/dev/md$i /dev/md$i"
+ done)
+
+TARGET=$(dialog --stdout --title "$PN" --default-item /dev/md0 \
+--menu "Which device do you want to use for ${RAIDLEVEL}?
+
+Notice: activated devices will not be listed for security reasons. Anyway, please make sure the selected device is not in use already!" 0 0 0 \
+$MD_LIST)
+[ $? -eq 0 ] || bailout 20
+
+AVAILABLE_PARTITIONS=$(LANG=C fdisk -l 2>/dev/null | \
+ sed 's/*//' | \
+ grep -v 'Extended$' | \
+ gawk -v num=0 -v ORS=' ' '/^\/dev\// {print $1}')
+[ -n "$AVAILABLE_PARTITIONS" ] || echo "FIXME: no partitions available?"
+PARTITION_LIST=$(for i in $(echo $AVAILABLE_PARTITIONS) ; do echo "$i $i off" ; done)
+
+dialog --title "$PN" \
+ --single-quoted \
+ --checklist "Please select the partitions you would like to use for your $RAIDLEVEL on ${TARGET}:" 0 0 0 \
+ $PARTITION_LIST 2>$TMPFILE
+RETVAL=$?
+SELECTED_PARTITIONS="$(cat $TMPFILE)"
+
+NUM_PARTITIONS=0
+for i in $(cat $TMPFILE) ; do
+ NUM_PARTITIONS="$((${NUM_PARTITIONS}+1))"
+done
+
+echo "
+Debug:
+
+mdadm --create --verbose $TARGET --level=$RAIDLEVEL
+ --raid-devices=$NUM_PARTITIONS $SELECTED_PARTITIONS
+"
+}
+
+prompt_for_swraid()
+{
+if dialog --stdout --title "$PN" \
+ --defaultno --yesno "Do you want to configure Software RAID?
+
+Please notice that currently only RAID levels 1 and 5 are supported by ${PN}. Configuration will take place using mdadm." 0 0 ; then
+ config_swraid_setup
+fi
+}
+# }}}
# interactive mode {{{
interactive_mode()
{
- prompt_for_target
+ welcome_dialog
+
+ prompt_for_swraid
+
+ # do not prompt for partition dialog if swraid has been configured already
+ [ -n "$TARGET" ] || prompt_for_target
+
prompt_for_bootmanager
+
+ [ -n "$BOOT_PARTITION" ] && GRUB="$(grubdevice $BOOT_PARTITION)"
+ [ -n "$TARGET" ] && GROOT="$(grubdevice $TARGET)"
+
prompt_for_mirror
- grubdevice $TARGET
-
- # FIXME
- echo "debug: BOOT_PARTITION=$BOOT_PARTITION"
- echo "debug: TARGET=$TARGET"
- echo "debug: MIRROR=$MIRROR"
- echo "debug: GROOT=$GROOT"
- # ask for raid
- # ask for lvm
}
# run interactive mode if we didn't get the according configuration yet
exit "$EXIT"
}
-trap bailout 1 2 3 15
+trap bailout HUP INT QUIT TERM
# we want to execute all the functions only once, simple check for it:
stage() {
dialog --timeout 10 --title "$PN" \
--yesno "Do you want to stop at this stage?
-Notice: you are running grml-debootstrap in non-interactive mode.
-grml-debootstrap will install Debian ${RELEASE} on ${TARGET}.
+Notice: you are running ${PN} in non-interactive mode.
+${PN} will install Debian ${RELEASE} on ${TARGET}.
Last chance to quit. Timeout of 10 seconds running....
Do you want to stop now?" 0 0 2>/dev/null
else # if not running automatic installation display configuration and prompt for execution:
einfo "$PN - Please recheck configuration before execution:"
echo
- echo " Target: $TARGET"
- case "$MNTPOINT" in "$TARGET") ;; *) echo " Mount point: $MNTPOINT" ;; esac
- [ -n "$GRUB" ] && echo " Install grub to: $GRUB"
- [ -n "$GROOT" ] && echo " Use root partition in grub: $GROOT"
- [ -n "$RELEASE" ] && echo " Using release: $RELEASE"
- [ -n "$MIRROR" ] && echo " Using mirror: $MIRROR"
- [ -n "$ISO" ] && echo " Using iso: $ISO"
+ echo " Target: $TARGET"
+ case "$MNTPOINT" in "$TARGET") ;; *) echo " Mount point: $MNTPOINT" ;; esac
+ [ -n "$GRUB" ] && echo " Install grub: $GRUB" || echo " Install grub: no"
+ [ -n "$RELEASE" ] && echo " Using release: $RELEASE"
+ [ -n "$MIRROR" ] && echo " Using mirror: $MIRROR"
+ [ -n "$ISO" ] && echo " Using iso: $ISO"
case "$MNTPOINT" in "$TARGET") ;; *) echo " Important! Continuing will delete all data from ${TARGET}!" ;; esac
echo
einfon "Is this ok for you? [y/N] "
# end dialog of autoinstallation {{{
if [ -n "$AUTOINSTALL" ] ; then
dialog --title "$PN" --msgbox \
- "Finished execution of ${0}.
-Enjoy your Debian system." 6 60
+ "Finished execution of ${PN}. Enjoy your Debian system." 0 0
else
- einfo "Finished execution of $PN - enjoy your Debian system." ; eend 0
+ einfo "Finished execution of ${PN}. Enjoy your Debian system." ; eend 0
fi
# }}}