# variables {{{
PN="$(basename $0)"
-VERSION='0.33-pre1'
+VERSION='0.39'
MNTPOINT="/mnt/debootstrap.$$"
# inside the chroot system locales might not be available, so use minimum:
--nodebootstrap Skip debootstrap, only do configuration to the target.
--grub <device> Target for grub installation. Usage example: /dev/sda
--arch <arch> Architecture to use. Currently only i386 is supported.
+ --filesystem <fs> Filesystem that should be used when target is a partition.
--insecure Do not download and check Release file signatures.
Configuration options:
-d, --confdir <path> Place of config files for debootstrap, defaults
to /etc/debootstrap
--packages <file> Install packages defined in specified list file.
+ --nopackages Skip installation of packages defined in
+ /etc/debootstrap/packages
--debconf <file> Pre-seed packages using specified pre-seed db file.
--keep_src_list Do not overwrite user provided apt sources.list.
--hostname <name> Hostname of Debian system.
check4root || exit 1
# }}}
-# source configuration file {{{
+# source main configuration file {{{
if [ -r /etc/debootstrap/config ] ; then
- if [ -n "$CONFIGFILE" ] ; then
- einfo "Using config file $CONFIGFILE."
- if ! . "$CONFIGFILE" ; then
- eerror "Error reading config file $CONFIGFILE" ; eend 1 ; exit 1
- fi
- else
- . /etc/debootstrap/config
- fi
+ . /etc/debootstrap/config
fi
# }}}
[ "$_opt_debopt" ] && DEBOOTSTRAP_OPT=$_opt_debopt
[ "$_opt_interactive" ] && INTERACTIVE=1
[ "$_opt_config" ] && CONFIGFILE=$_opt_config
+[ "$_opt_filesystem" ] && MKFS="mkfs.$_opt_filesystem"
[ "$_opt_packages_set" ] && PACKAGES='yes'
+[ "$_opt_nopackages" ] && PACKAGES=''
[ "$_opt_debconf_set" ] && DEBCONF='yes'
[ "$_opt_scripts_set" ] && SCRIPTS='yes'
[ "$_opt_pre_scripts_set" ] && PRE_SCRIPTS='yes'
}
# }}}
+# source specified configuration file {{{
+if [ -n "$CONFIGFILE" ] ; then
+ einfo "Reading specified config file $CONFIGFILE."
+ if ! . "$CONFIGFILE" ; then
+ eerror "Error reading config file $CONFIGFILE" ; eend 1 ; exit 1
+ fi
+fi
+# }}}
+
# backwards compability checks {{{
if [ -n "$GROOT" ] ; then
echo "Error: you seem to have \$GROOT configured." >&2
fi
PARTITION_LIST=$(for i in $(echo $AVAILABLE_PARTITIONS) ; do
- echo "$i $(vol_id --type $i 2>/dev/null || echo [no_filesystem_yet])"
+ echo "$i $(blkid -s TYPE -o value $i 2>/dev/null || echo [no_filesystem_yet])"
done)
TARGET=$(dialog --title "$PN" --single-quoted --stdout \
MBRDISK=$(readlink -f $MBRDISK)
else
# fall back to old behaviour
- MBRDISK=$(echo ${TARGET} | sed -e 's/[0-9][0-9]*$/')
+ MBRDISK=$(echo ${TARGET} | sed -e 's/[0-9][0-9]*$//')
fi
MBRPART="MBR of $MBRDISK"
MIRROR="$(dialog --stdout --title "${PN}" --inputbox \
"Please enter Debian mirror you would like to use for installing packages." \
0 0 $MIRROR)"
- else # CHROOT_VARIABLES == local
+ else # CHOOSE_MIRROR == local
[ -n "$ISO" ] || ISO='/mnt/mirror'
ISO="$(dialog --stdout --title "${PN}" --inputbox \
"Please enter directory name you would like to use for installing packages." \
gawk -v num=0 -v ORS=' ' '/^\/dev\// {print $1}')
[ -n "$AVAILABLE_PARTITIONS" ] || echo "FIXME: no partitions available?"
PARTITION_LIST=$(for i in $(echo $AVAILABLE_PARTITIONS) ; do
- echo "$i $(vol_id --type $i 2>/dev/null || echo [no_filesystem_yet]) off"
+ echo "$i $(blkid -s TYPE -o value $i 2>/dev/null || echo [no_filesystem_yet]) off"
done)
dialog --title "$PN" --separate-output \
set +e
# TODO: better error handling?
yes | mdadm --create "${TARGET}" --level="${RAIDLEVEL}" \
- --raid-devices="${NUM_PARTITIONS}" ${SELECTED_PARTITIONS} 1>/dev/null 2>$ERRORFILE
+ --raid-devices="${NUM_PARTITIONS}" ${SELECTED_PARTITIONS} >/dev/null 2>$ERRORFILE
RC=$?
set -e
# make sure nothing is left inside chroot so we can unmount it
[ -x "$MNTPOINT"/etc/init.d/ssh ] && "$MNTPOINT"/etc/init.d/ssh stop
[ -x "$MNTPOINT"/etc/init.d/mdadm ] && "$MNTPOINT"/etc/init.d/mdadm stop
- # ugly, but make sure we really don't leav anything (/proc /proc is intended)
- for ARG in /sys -a /proc /proc ; do
- [ -x "$MNTPOINT"/bin/umount ] && chroot "$MNTPOINT" umount $ARG 1>/dev/null 2>&1 || true
+ # ugly, but make sure we really don't leave anything (/proc /proc is intended)
+ for ARG in /sys /proc /proc ; do
+ [ -x "$MNTPOINT"/bin/umount ] && chroot "$MNTPOINT" umount $ARG >/dev/null 2>&1 || true
done
- umount "$MNTPOINT"/dev 1>/dev/null 2>&1 || true
+ umount "$MNTPOINT"/dev >/dev/null 2>&1 || true
- [ -d "$MNTPOINT/$ISODIR" ] && umount "$MNTPOINT/$ISODIR" 1>/dev/null 2>&1 || true
+ [ -d "$MNTPOINT/$ISODIR" ] && umount "$MNTPOINT/$ISODIR" >/dev/null 2>&1 || true
if [ -n "$DIRECTORY" ] ; then
einfo "Not unmounting $MNTPOINT as you requested me to install into a directory of your own choice." ; eend 0
else
- einfo "Unmounting $MNTPOINT" ; umount "$MNTPOINT" ; eend $?
+ einfo "Unmounting $MNTPOINT" ; umount "$MNTPOINT" ; eend $?
fi
if [ -n "$STAGES" ] ; then
# make sure /dev/disk/by-uuid/... is up2date, otherwise grub
# will fail to detect the uuid in the chroot
- blockdev --rereadpt "${TARGET%%[0-9]*}"
+ if echo "$TARGET" | grep -q "/dev/md" ; then
+ blockdev --rereadpt "${TARGET}"
+ else
+ blockdev --rereadpt "${TARGET%%[0-9]*}"
+ fi
# give the system 2 seconds, otherwise we might run into
# race conditions :-/
sleep 2
# modify filesystem settings {{{
tunefs() {
- if [ -n "$TUNE2FS" ] ; then
+ if [ -n "$TUNE2FS" ] && echo "$MKFS" | grep -q "mkfs.ext" ; then
einfo "Disabling automatic filesystem check on $TARGET via tune2fs"
$TUNE2FS $TARGET
eend $?
if grep -q "$MNTPOINT" /proc/mounts || [ -n "$DIRECTORY" ] ; then
einfo "Running $DEBOOTSTRAP $DEBOOTSTRAP_OPT for release ${RELEASE}${ARCHINFO} using ${MIRROR}${ISO}"
if [ -n "$MIRROR" ] ; then
+ einfo "Executing: $DEBOOTSTRAP $ARCHCMD $KEYRING $DEBOOTSTRAP_OPT $RELEASE $MNTPOINT $MIRROR"
$DEBOOTSTRAP $ARCHCMD $KEYRING $DEBOOTSTRAP_OPT $RELEASE $MNTPOINT $MIRROR
else
+ einfo "Executing: $DEBOOTSTRAP $ARCHCMD $KEYRING $DEBOOTSTRAP_OPT $RELEASE $MNTPOINT $ISO"
$DEBOOTSTRAP $ARCHCMD $KEYRING $DEBOOTSTRAP_OPT $RELEASE $MNTPOINT $ISO
fi
eend $?
[ -n "$ROOTPASSWORD" ] && echo "ROOTPASSWORD=$ROOTPASSWORD" >> $CHROOT_VARIABLES
[ -n "$TARGET" ] && echo "TARGET=$TARGET" >> $CHROOT_VARIABLES
[ -n "$TARGET_UUID" ] && echo "TARGET_UUID=$TARGET_UUID" >> $CHROOT_VARIABLES
+ [ -n "$RM_APTCACHE" ] && echo "RM_APTCACHE=$RM_APTCACHE" >> $CHROOT_VARIABLES
cp $VERBOSE $CONFFILES/chroot-script $MNTPOINT/bin/chroot-script
chmod 755 $MNTPOINT/bin/chroot-script
cp $VERBOSE /etc/network/interfaces $MNTPOINT/etc/network/interfaces
fi
+ # install config file providing some example entries
+ if [ -r /etc/network/interfaces.examples -a ! -r "$MNTPOINT/etc/network/interfaces.examples" ] ; then
+ cp /etc/network/interfaces.examples "$MNTPOINT/etc/network/interfaces.examples"
+ fi
+
eend 0
}
# }}}
return 0
fi
+ if ! [ -x "$(which grub-install)" ] ; then
+ echo "Error: grub-install not available. (Error while installing grub package?)"
+ return 1
+ fi
+
if [ -n "$SELECTED_PARTITIONS" ] ; then # using sw-raid
for device in $SELECTED_PARTITIONS ; do
GRUB="${device%%[0-9]}"
einfo "Installing grub on ${GRUB}:"
- [ -x /usr/sbin/grub-install ] && GRUBINSTALL="/usr/sbin/grub-install --no-floppy" || GRUBINSTALL="/sbin/grub-install --no-floppy"
- $GRUBINSTALL --root-directory="$MNTPOINT" "$GRUB"
+ grub-install --no-floppy --root-directory="$MNTPOINT" "$GRUB"
eend $?
done
else
einfo "Installing grub on ${GRUB}:"
- [ -x /usr/sbin/grub-install ] && GRUBINSTALL="/usr/sbin/grub-install --no-floppy" || GRUBINSTALL="/sbin/grub-install --no-floppy"
- $GRUBINSTALL --root-directory="$MNTPOINT" "$GRUB"
+ grub-install --no-floppy --root-directory="$MNTPOINT" "$GRUB"
eend $?
fi
}