# variables {{{
PN="$(basename $0)"
-VERSION='0.18'
+VERSION='0.23'
MNTPOINT="/mnt/debootstrap.$$"
# inside the chroot system locales might not be available, so use minimum:
grep -v 'Extended$' | \
gawk -v num=0 -v ORS=' ' '/^\/dev\// {print $1}')
- [ -n "$AVAILABLE_PARTITIONS" ] || echo "FIXME: no partitions available?"
+ if [ -z "$AVAILABLE_PARTITIONS" ] ; then
+ dialog --title "$PN" --trim \
+ --msgbox "Sorry, no partitions found. Please configure your
+ harddisks (see /proc/partitions) using a tool like fdisk,
+ cfdisk, gpart, gparted,..." 0 0
+ exit 0
+ fi
+
PARTITION_LIST=$(for i in $(echo $AVAILABLE_PARTITIONS) ; do
echo "$i $(vol_id --type $i 2>/dev/null || echo [no_filesystem_yet])"
done)
}
# }}}
+# ask for password {{{
+prompt_for_password()
+{
+ ROOTPW1='PW1'
+ ROOTPW2='PW2'
+ while [ "$ROOTPW1" != "$ROOTPW2" ]; do
+ ROOTPW1=$(dialog --insecure --stdout --title "${PN}" --passwordbox \
+ "Please enter the password for the root account:" 10 60)
+ ROOTPW2=$(dialog --insecure --stdout --title "${PN}" --passwordbox \
+ "Please enter the password for the root account again for \
+ confirmation:" 10 60)
+
+ if [ "$ROOTPW1" != "$ROOTPW2" ]; then
+ $(dialog --stdout --title "${PN}" --ok-label \
+ "Retry" --msgbox "Passwords do not match!" 10 60)
+ fi
+ done
+ ROOTPASSWORD="$ROOTPW1"
+}
+# }}}
+
# ask for Debian mirror {{{
prompt_for_mirror()
{
config_swraid_setup()
{
TMPFILE=$(mktemp)
-RAIDLEVEL=$(dialog --stdout --title "$PN" --default-item raid1 \
- --menu "Which RAID level do you want to use?" 0 0 0 \
- raid1 "Software RAID level 1" \
- raid5 "Software RAID level 5")
-[ $? -eq 0 ] || bailout 20
+
+# Currently we support only raid1:
+RAIDLEVEL='raid1'
+
+#RAIDLEVEL=$(dialog --stdout --title "$PN" --default-item raid1 \
+# --menu "Which RAID level do you want to use?" 0 0 0 \
+# raid1 "Software RAID level 1" \
+# raid5 "Software RAID level 5")
+#[ $? -eq 0 ] || bailout 20
MD_LIST=$(for i in $(seq 0 9) ; do
awk '{print $4}' /proc/partitions | grep -q md$i || \
echo "$i $(vol_id --type $i 2>/dev/null || echo [no_filesystem_yet]) off"
done)
-dialog --title "$PN" \
- --single-quoted \
+dialog --title "$PN" --separate-output \
--checklist "Please select the partitions you would like to use for your $RAIDLEVEL on ${TARGET}:" 0 0 0 \
$PARTITION_LIST 2>$TMPFILE
RETVAL=$?
if dialog --stdout --title "$PN" \
--defaultno --yesno "Do you want to configure Software RAID?
-Please notice that currently only RAID levels 1 and 5 are supported by ${PN}. Configuration will take place using mdadm." 0 0 ; then
+Please notice that only RAID level 1 is supported by ${PN} currently. Configuration will take place using mdadm." 0 0 ; then
config_swraid_setup
fi
}
Install grub: $GRUB"
[ -n "$RELEASE" ] && INFOTEXT="$INFOTEXT
Using release: $RELEASE"
+ [ -n "$HOSTNAME" ] && INFOTEXT="$INFOTEXT
+ Using hostname $HOSTNAME"
[ -n "$MIRROR" ] && INFOTEXT="$INFOTEXT
Using mirror: $MIRROR"
prompt_for_hostname
+ prompt_for_password
+
# use first disk of sw-raid for grub by default, install grub on
# all involved disks later on
if echo "$TARGET" | grep -q '/dev/md' ; then
ISODIR=${ISODIR%%/}
# }}}
-# provide variables to chroot system {{{
-CHROOT_VARIABLES="/var/cache/grml-debootstrap/variables_${SHORT_TARGET}"
-touch $CHROOT_VARIABLES
-chmod 600 $CHROOT_VARIABLES # make sure nobody except root can read it
-[ -n "$ARCH" ] && echo "ARCH=$ARCH" > $CHROOT_VARIABLES
-[ -n "$GRUB" ] && echo "GRUB=$GRUB" >> $CHROOT_VARIABLES
-[ -n "$GROOT" ] && echo "GROOT=$GROOT" >> $CHROOT_VARIABLES
-[ -n "$TARGET" ] && echo "TARGET=$TARGET" >> $CHROOT_VARIABLES
-[ -n "$ISO" ] && echo "ISO=$ISO" >> $CHROOT_VARIABLES
-[ -n "$ISODIR" ] && echo "ISODIR=$ISO" >> $CHROOT_VARIABLES
-[ -n "$MIRROR" ] && echo "MIRROR=$MIRROR" >> $CHROOT_VARIABLES
-[ -n "$MIRROR" ] && echo "CHROOTMIRROR=$MIRROR" >> $CHROOT_VARIABLES
-[ -n "$ROOTPASSWORD" ] && echo "ROOTPASSWORD=$ROOTPASSWORD" >> $CHROOT_VARIABLES
-# }}}
-
# helper functions {{{
# we want to exit smoothly and clean:
bailout(){
if [ -n "$MKFS" ] ; then
einfo "Running $MKFS on $TARGET"
$MKFS $TARGET
+ TARGET_UUID="$(vol_id -u $TARGET 2>/dev/null || echo '')"
eend $?
fi
}
if ! grep -q $MNTPOINT /proc/mounts ; then
mount_target
fi
- if grep -q $MNTPOINT /proc/mounts ; then
- einfo "Running $DEBOOTSTRAP for release ${RELEASE}${ARCHINFO} using ${MIRROR}${ISO}"
- [ -n "$MIRROR" ] && $DEBOOTSTRAP $ARCHCMD $RELEASE $MNTPOINT $MIRROR || \
- $DEBOOTSTRAP $ARCHCMD $RELEASE $MNTPOINT $ISO
+ if grep -q $MNTPOINT /proc/mounts || [ -n "$DIRECTORY" ] ; then
+ einfo "Running $DEBOOTSTRAP $DEBOOTSTRAP_OPT for release ${RELEASE}${ARCHINFO} using ${MIRROR}${ISO}"
+ [ -n "$MIRROR" ] && $DEBOOTSTRAP $ARCHCMD $DEBOOTSTRAP_OPT $RELEASE $MNTPOINT $MIRROR || \
+ $DEBOOTSTRAP $ARCHCMD $DEBOOTSTRAP_OPT $RELEASE $MNTPOINT $ISO
eend $?
else
eerror "Error: $MNTPOINT not mounted, can not continue."
# prepare chroot via chroot-script {{{
preparechroot() {
einfo "Preparing chroot system"
+
+ # provide variables to chroot system
+ CHROOT_VARIABLES="/var/cache/grml-debootstrap/variables_${SHORT_TARGET}"
+ touch $CHROOT_VARIABLES
+ chmod 600 $CHROOT_VARIABLES # make sure nobody except root can read it
+ echo "# Configuration of ${PN}" > $CHROOT_VARIABLES
+ [ -n "$ARCH" ] && echo "ARCH=$ARCH" >> $CHROOT_VARIABLES
+ [ -n "$GROOT" ] && echo "GROOT=$GROOT" >> $CHROOT_VARIABLES
+ [ -n "$GRUB" ] && echo "GRUB=$GRUB" >> $CHROOT_VARIABLES
+ [ -n "$HOSTNAME" ] && echo "HOSTNAME=$HOSTNAME" >> $CHROOT_VARIABLES
+ [ -n "$ISODIR" ] && echo "ISODIR=$ISO" >> $CHROOT_VARIABLES
+ [ -n "$ISO" ] && echo "ISO=$ISO" >> $CHROOT_VARIABLES
+ [ -n "$MIRROR" ] && echo "CHROOTMIRROR=$MIRROR" >> $CHROOT_VARIABLES
+ [ -n "$MIRROR" ] && echo "MIRROR=$MIRROR" >> $CHROOT_VARIABLES
+ [ -n "$KEEP_SRC_LIST" ] && echo "KEEP_SRC_LIST=$KEEP_SRC_LIST" >> $CHROOT_VARIABLES
+ [ -n "$ROOTPASSWORD" ] && echo "ROOTPASSWORD=$ROOTPASSWORD" >> $CHROOT_VARIABLES
+ [ -n "$TARGET" ] && echo "TARGET=$TARGET" >> $CHROOT_VARIABLES
+ [ -n "$TARGET_UUID" ] && echo "TARGET_UUID=$TARGET_UUID" >> $CHROOT_VARIABLES
+
cp $CONFFILES/chroot-script $MNTPOINT/bin/chroot-script
chmod 755 $MNTPOINT/bin/chroot-script
mkdir $MNTPOINT/etc/debootstrap/
sed -i "s#GROOT=.*#GROOT=\"$GROOT\"#" $MNTPOINT/etc/debootstrap/config
cp /etc/debootstrap/packages $MNTPOINT/etc/debootstrap/packages
+ [ -f /etc/debootstrap/debconf-selections -a "$DEBCONF" = 'yes' ] && \
+ cp /etc/debootstrap/debconf-selections $MNTPOINT/etc/debootstrap/
# notice: do NOT use $CHROOT_VARIABLES inside chroot but statically file instead!
cp $CHROOT_VARIABLES $MNTPOINT/etc/debootstrap/variables
- cp -a /etc/debootstrap/extrapackages/ $MNTPOINT/etc/debootstrap/
+ cp -a -L /etc/debootstrap/extrapackages/ $MNTPOINT/etc/debootstrap/
# make sure we can access network [relevant for cdebootstrap]
[ -f "$MNTPOINT/etc/resolv.conf" ] || cp /etc/resolv.conf $MNTPOINT/etc/resolv.conf
# MAKEDEV is just a forking bomb crap, let's do it on our own instead :)
( cd $MNTPOINT/dev && tar zxf /etc/debootstrap/devices.tar.gz )
- # copy any existing existing files to chroot
- [ -d /etc/debootstrap/boot ] && cp -a /etc/debootstrap/boot/* $MNTPOINT/boot/
- [ -d /etc/debootstrap/etc ] && cp -a /etc/debootstrap/etc/* $MNTPOINT/etc/
- [ -d /etc/debootstrap/share ] && cp -a /etc/debootstrap/share/* $MNTPOINT/share/
- [ -d /etc/debootstrap/usr ] && cp -a /etc/debootstrap/usr/* $MNTPOINT/usr/
- [ -d /etc/debootstrap/var ] && cp -a /etc/debootstrap/var/* $MNTPOINT/var/
+ # copy any existing files to chroot
+ [ -d /etc/debootstrap/bin ] && cp -a -L /etc/debootstrap/bin/* $MNTPOINT/bin/
+ [ -d /etc/debootstrap/boot ] && cp -a -L /etc/debootstrap/boot/* $MNTPOINT/boot/
+ [ -d /etc/debootstrap/etc ] && cp -a -L /etc/debootstrap/etc/* $MNTPOINT/etc/
+ [ -d /etc/debootstrap/sbin ] && cp -a -L /etc/debootstrap/sbin/* $MNTPOINT/sbin/
+ [ -d /etc/debootstrap/share ] && cp -a -L /etc/debootstrap/share/* $MNTPOINT/share/
+ [ -d /etc/debootstrap/usr ] && cp -a -L /etc/debootstrap/usr/* $MNTPOINT/usr/
+ [ -d /etc/debootstrap/var ] && cp -a -L /etc/debootstrap/var/* $MNTPOINT/var/
# copy local network setup to chroot
if [ -r /etc/network/interfaces -a ! -r "${MNTPOINT}"/etc/network/interfaces ] ; then