Michael Prokop [Wed, 15 Aug 2018 09:21:40 +0000 (11:21 +0200)]
Release new version 0.32.1
Michael Prokop [Wed, 15 Aug 2018 09:14:52 +0000 (11:14 +0200)]
jessie-backports: use usb-modeswitch from jessie-backports
libudev1 + udev can be installed from jessie-backports
only if usb-modeswitch is also considered from
jessie-backports.
Michael Prokop [Tue, 31 Jul 2018 06:54:15 +0000 (08:54 +0200)]
SW: Drop qemu-kvm (qemu-system-x86 being its replacement) from GRML_FULL
qemu-kvm is in `Section: oldlibs` and deborphan removes
the package anyway, even though we mark it as `--add-keep`.
There's no point in putting further effort into this,
as qemu-system-x86 provides everything what's needed nowadays.
Michael Prokop [Tue, 31 Jul 2018 06:44:58 +0000 (08:44 +0200)]
SW: replace targetcli + python-urwid with targetcli-fb in GRML_FULL
targetcli exists only in wheezy + experimental nowadays.
Quoting the package description of targetcli-fb:
| The targetcli-fb package is a fork of the "targetcli" code
| written by RisingTide Systems. The "-fb" differentiates between
| the original and this version. Please ensure to use either all
| "fb" versions of the targetcli components -- targetcli, rtslib,
| and configshell, or stick with all non-fb versions, since they
| are no longer strictly compatible.
Michael Prokop [Tue, 31 Jul 2018 06:42:51 +0000 (08:42 +0200)]
SW: drop alsa-base (no longer existing) from GRML_FULL
Used to be `ALSA driver configuration files` package until
wheezy, then became a dummy package with jessie and later
on longer exists at all.
Michael Prokop [Tue, 31 Jul 2018 06:40:59 +0000 (08:40 +0200)]
SW: replace lynx-cur (transitional package) with lynx in GRML_FULL
Michael Prokop [Tue, 31 Jul 2018 05:50:35 +0000 (07:50 +0200)]
SW: replace btrfs-tools (transitional package) with btrfs-progs in GRML_FULL
Michael Prokop [Mon, 16 Jul 2018 06:12:44 +0000 (08:12 +0200)]
SW: add bcache-tools to GRML_FULL
Quoting from 2018-07-15 on IRC:
| 11:26 < suebal> Can't mount /dev/bcache0 using grml - I suppose there's no bache support. What can I do else?
Michael Prokop [Thu, 14 Jun 2018 14:02:40 +0000 (16:02 +0200)]
SW: add dislocker to GRML_FULL
Thanks: f0
Closes grml/grml#60
Michael Prokop [Fri, 8 Jun 2018 08:52:35 +0000 (10:52 +0200)]
SW: add qemu-guest-agent to GRML_FULL
With qemu-guest-agent service being present we support retrieving
network information from a VM, as supported with e.g. Proxmox
v5.2 (verified with qemu-guest-agent v1:2.8+dfsg-6 on grml64-full
2017.05).
Adding only to GRML_FULL as on GRML_SMALL it would pull in
libglib2.0-0 and add ~6MB of disk space, while on GRML_FULL
it's only ~1MB total.
Michael Prokop [Fri, 1 Jun 2018 14:16:35 +0000 (16:16 +0200)]
Release new version 0.32.0
Michael Prokop [Fri, 1 Jun 2018 13:22:15 +0000 (15:22 +0200)]
SW: add thin-provisioning-tools to GRML_FULL
Quoting from the bugreport:
| In order to activate lvm volumes which use lvm caching,
| /usr/sbin/cache_check (provided by thin-provisioning-tools) needs
| to be installed (see https://bugs.debian.org/773731). As grml
| currently does not include thin-provisioning-tools, volumes which
| use caching cannot be activated on startup (e.g. via the lvm boot
| option), not activated manually (naturally one can install
| thin-provisioning-tools via apt, but that doesn't help with
| activating on startup).
Closes grml/grml#81
Thanks: James Tocknell
Michael Prokop [Tue, 29 May 2018 22:01:00 +0000 (00:01 +0200)]
Update GRUB test for Secure Boot support
cpuid with the recent Ubuntu GRUB no longer fails,
so instead let's invoke `probe` with an incomplete
command line, which returns fine in SecureBoot
boot environment while it fails in full GRUB
session with an error message.
Paul Menzel [Wed, 23 May 2018 13:05:26 +0000 (15:05 +0200)]
templates/EFI: use files from Ubuntu 18.04
Currently, the shim cannot be loaded with TianoCore (using
/usr/share/edk2.git/ovmf-x64/OVMF-pure-efi.fd from
https://www.kraxel.org/repos/jenkins/edk2/edk2.git-ovmf-x64-0-
20180508.84.g7cd8a57599.noarch.rpm)
and also fails on several systems like on the Dell XPS 13 9360 and 9370,
Dell r640 (see http://ml.grml.org/pipermail/grml/2018-May/011734.html)
and HP EliteBook 820 G3.
Error message during boot:
| Reloc 0 block size
2756420659 is invalid
| Relocation failed: Unsupported
Michael Prokop [Fri, 25 May 2018 11:59:16 +0000 (13:59 +0200)]
Release new version 0.31.3
Michael Prokop [Fri, 25 May 2018 11:58:50 +0000 (13:58 +0200)]
Bump Standards-Version to 4.1.4
Marc Haber [Mon, 19 Mar 2018 16:03:52 +0000 (17:03 +0100)]
add placeholder and explanation inviting local patches to isolinux.cfg
this closes grml/grml-live #45
This is unfortunately completely untested, since to multiple issues, one
of them being grml/grml-live #44 and grml/grml-live #46 are still
unaddressed, I cannot currently reliably build grml images. As it is a
comment-only patch, this can be safely applied and I'll happily test a
daily image afterwards.
Michael Prokop [Fri, 25 May 2018 10:52:07 +0000 (12:52 +0200)]
Merge remote-tracking branch 'remotes/origin/github/pr/52'
Michael Prokop [Fri, 25 May 2018 08:50:49 +0000 (10:50 +0200)]
Merge remote-tracking branch 'origin/github/pr/49'
Michael Prokop [Sun, 13 May 2018 07:39:35 +0000 (09:39 +0200)]
SW: add restic
As suggested by Frank Terbeck <ft@grml.org>
Michael Prokop [Fri, 27 Apr 2018 09:54:02 +0000 (11:54 +0200)]
Release new version 0.31.2
Michael Prokop [Fri, 27 Apr 2018 09:28:24 +0000 (11:28 +0200)]
updatebase.GRMLBASE: no longer install aptitude
We sitched from aptitude to apt-get as package manager in FAI's
package list back in commit
121b3484e, so we shouldn't strictly
need aptitude any longer. The ongoing ncurses transition is
failing our builds currently, so that's a good chance to make
this change.
Michael Prokop [Fri, 27 Apr 2018 09:23:10 +0000 (11:23 +0200)]
Replace /etc/apt/grml.key with /etc/apt/trusted.gpg.d/grml-archive-keyring.gpg
/etc/apt/grml.key was a PGP public key block Public-Key (old) and
required installation via apt-key.
By instead placing a `GPG key public ring` into
/etc/apt/trusted.gpg.d/grml-archive-keyring.gpg we don't need
this extra apt-key invocation any longer, which might actually
fail with:
| E: gnupg, gnupg2 and gnupg1 do not seem to be installed, but one of them is required for this operation
Installation of gnupg isn't enough though, since then we run
into:
| 10:45:56 Warning: apt-key output should not be parsed (stdout is not a terminal)
| 10:45:58 gpg: can't connect to the agent: IPC connect call failed
Drop old /etc/grml/fai/config/files/etc/apt/grml.key/GRMLBASE via maintscript
Thanks: Antoine Beaupré <anarcat@debian.org> for a related PR
in https://github.com/grml/grml-debian-keyring/pull/3
Michael Prokop [Fri, 27 Apr 2018 09:17:20 +0000 (11:17 +0200)]
SW: replace iproute with iproute2
iproute is a transitional package for iproute2 since Debian/jessie
and no longer exists starting with Debian/buster.
Michael Prokop [Fri, 27 Apr 2018 07:33:07 +0000 (09:33 +0200)]
SW: drop apt-transport-https from GRMLBASE
apt-transport-https is a transitional package starting with
Debian/buster, so the package is no longer relevant for builds
against Debian/testing + sid/unstable nowadays.
If someone needs this package in grml-live builds using
Debian/stretch or older Debian releases then the package should
be included in local configurations.
Markus Lindberg [Wed, 28 Mar 2018 13:53:05 +0000 (15:53 +0200)]
Use stretch-backports instead of jessie-backports for stable
Michael Prokop [Wed, 14 Mar 2018 12:29:37 +0000 (13:29 +0100)]
GRMLBASE/98-clean-chroot: execute resolvconf workarounds also for systemd
/etc/resolvconf/resolv.conf.d/original leaks data from the environment
the ISO was built in, and /etc/resolv.conf should be empty and be filled
with data from DHCP.
Thanks: András Korn
Michael Prokop [Tue, 20 Feb 2018 16:58:12 +0000 (17:58 +0100)]
Release new version 0.31.1
Marcos Mello [Thu, 15 Feb 2018 16:12:31 +0000 (14:12 -0200)]
Do not handle lid switch
Fixes grml/grml#75.
Michael Prokop [Fri, 1 Dec 2017 09:51:47 +0000 (10:51 +0100)]
ssh service: set RuntimeDirectory=sshd to work with recent openssh versions
We need to set RuntimeDirectory=sshd, otherwise /run/sshd doesn't
exist and service startup fails with:
| grml sshd[1845]: Missing privilege separation directory: /run/sshd
While at it sync our ssh service file with Debian's openssh
package 1:7.6p1-2 and drop the unused ssh-bootoption.service
file (we currently start ssh service via grml-autoconfig).
Also see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=864190
Closes grml/grml#80
Thanks: sl0n for bugreport
Thanks: Darshaka Pathirana <dpat@grml.org> for feedback
Michael Prokop [Wed, 22 Nov 2017 13:12:06 +0000 (14:12 +0100)]
GRMLBASE/93-update-usbids: test for new update-usbids location in /usr/sbin
"Recent" versions of usbutils ship the update-usbids
binary in /usr/sbin and no longer in /usr/bin.
Michael Prokop [Wed, 22 Nov 2017 13:09:28 +0000 (14:09 +0100)]
GRMLBASE/91-update-pciids: test for new update-pciids location in /usr/sbin
Since pciutils v1:3.2.0-1 the update-pciids binary lives in
/usr/sbin and no longer in /usr/bin.
Michael Prokop [Thu, 16 Nov 2017 14:11:13 +0000 (15:11 +0100)]
GRMLBASE/52-mdadm: fix path for 64-md-raid-assembly.rules
This should be /lib/udev/rules.d/64-md-raid-assembly.rules
and not /usr/lib/udev/rules.d/64-md-raid-assembly.rules
While at it use the same approach as for GRMLBASE/50-lvm
in the previous commit, by creating an empty file
instead of just removing it.
Michael Prokop [Thu, 16 Nov 2017 12:49:43 +0000 (13:49 +0100)]
Generate empty /lib/udev/rules.d/69-lvm-metad.rules instead of removing the file
Since lvm2 2.02.176-4 initramfs generation fails if
neither /etc/udev/rules.d/69-lvm-metad.rules nor
/lib/udev/rules.d/69-lvm-metad.rules exists.
So instead of removing the file just create an empty one.
See http://bugs.debian.org/881916
Michael Prokop [Fri, 6 Oct 2017 12:05:50 +0000 (14:05 +0200)]
SW: add ldnsutils to GRML_SMALL
dig would be nice to have, though pulls in ~41MB of disk space.
drill from ldnsutils is a nice alternative.
See grml/grml/#56
Michael Prokop [Fri, 6 Oct 2017 10:24:09 +0000 (12:24 +0200)]
SW: add x11vnc to GRML_FULL to properly support vnc boot option
Closes grml/grml#62
Thanks: luke2261git for the bugreport
Michael Prokop [Sat, 23 Sep 2017 11:55:04 +0000 (13:55 +0200)]
Fix a bunch of typos
s/and and/and/
s/simplier/simpler/
s/dependancy/dependency/
s/mesages/messages/
s/retreive/retrieve/
s/to to/to/
s/specifed/specified/
Michael Prokop [Thu, 7 Sep 2017 07:35:47 +0000 (09:35 +0200)]
Release new version 0.31.0
Michael Prokop [Thu, 7 Sep 2017 07:22:25 +0000 (09:22 +0200)]
scripts/generate_netboot_package.sh: use net.ifnames=0 as default boot option
Otherwise we end up with arbitrary network device names which
aren't properly supported (yet).
See grml/grml#65
Michael Prokop [Wed, 6 Sep 2017 07:20:08 +0000 (09:20 +0200)]
Secure Boot GRUB template: be more dynamic + don't overwrite with empty variable
By searching for grmlenv.cfg we can make it more dynamic
instead of having to hardcode (hd0) which might be wrong
in the grml2usb situation.
There's also no need to set root/prefix multiple times, especially
since we depend on 'root=(hd0)' for the default ISO boot anyway.
Don't overwrite prefix if the grml_orig_prefix variable is empty.
Secure Boot enabled ISOs generated with grml-live >=0.31.0 are supported
with grml2usb >=0.16.0.
Michael Prokop [Fri, 1 Sep 2017 14:38:33 +0000 (16:38 +0200)]
SW: add btrfs-progs to GRML_SMALL
Closes grml/grml#69
Michael Prokop [Thu, 31 Aug 2017 00:54:32 +0000 (02:54 +0200)]
Secure Boot support
Thanks to the way the signed GRUB by Ubuntu works we seem to be
able to keep our common EFI GRUB configs working next to the new
Secure Boot related EFI GRUB configs. If Secure Boot is enabled
we get the same look and feel like with common EFI boot, though
with a Secure Boot specific boot menu (since e.g. the linux16
command isn't available under Secure Boot). If EFI is running
with Secure Boot *disabled* it continues to look like it used to
do so far. If this is working out as planned there's no visible
change from a user point of view on systems with Secure Boot
disabled.
With this change we also get rid of some magic with grml-live
relying on behavior of
/etc/grml/fai/config/scripts/GRMLBASE/45-grub-images, including
moving files around.
We also no longer skip the boot stage during rebuilds. This has
been a source of frustration and annoying debugging sessions when
files inside grml_cd/boot/ didn't receive changes during rebuilds
and the user in front of the system is ignoring the according
"skip" notice or forgot to remove grml_cd/boot.
While at it rewrite debian/copyright in
http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
Thanks: Michael Schierl <schierlm@gmx.de> for help regarding the Secure Boot setup
Michael Prokop [Wed, 30 Aug 2017 12:23:55 +0000 (14:23 +0200)]
SW: add whois to GRML_SMALL
It adds only 346kb of additional disk space.
Debian's mkpasswd is part of the whois package.
It's the mkpassword that can generate salted hashes suitable for /etc/shadow.
Thanks: Marc Haber for the suggestion
Closes grml/grml#66
Michael Prokop [Wed, 30 Aug 2017 12:02:47 +0000 (14:02 +0200)]
Use stretch instead of jessie for current defaults in docs + grml-live config file
Michael Prokop [Wed, 30 Aug 2017 12:02:09 +0000 (14:02 +0200)]
Add support for Debian buster (AKA Debian v10 and current Detian testing)
Michael Prokop [Wed, 30 Aug 2017 11:48:57 +0000 (13:48 +0200)]
Drop support for Debian wheezy
It's oldoldstable nowadays and we no longer use it anywhere,
so let's drop related zsh completion and config files.
Michael Prokop [Wed, 30 Aug 2017 11:46:26 +0000 (13:46 +0200)]
Provide jessie support for systemd + recent kernel packages
To be able to use systemd-container we need the systemd
version from jessie-backports.
We also need recent versions of linux-base, firmware-misc-nonfree,
firmware-linux-nonfree + firmware-linux from jessie-backports
for the related kernel packages.
Michael Prokop [Wed, 30 Aug 2017 11:45:35 +0000 (13:45 +0200)]
Provide workaround for systemd's systemctl failures on jessie
For unknown reasons `systemctl preset-all` and
`systemctl set-default grml-boot.target` return with exit code 1
even though it seems to be working fine.
Michael Prokop [Wed, 30 Aug 2017 08:32:49 +0000 (10:32 +0200)]
SW: add ndisc6 + rdnssd to GRML_SMALL and GRML_FULL
It adds only 381kB of additional disk space.
Quoting from the feature request:
| rdnssd is a tool that will listen to DNS server being offered in
| an IPv6 router anouncement and configure the local system to use
| the DNS servers included in there. The daemon just needs to be
| installed and enabled. Without this, an IPv6 only grml system
| will be with network, but without DNS.
|
| While we're at it, IPv6 is much more easily debugged if ndisc6, a
| user space tool to send out IPv6 router solicitations and to
| display the contents of router advertisements received, is
| included.
Thanks: Marc Haber for the suggestion
Closes grml/grml#67
Michael Prokop [Wed, 30 Aug 2017 08:30:14 +0000 (10:30 +0200)]
SW: add fsarchiver to GRML_SMALL
It adds only 443kB of additional disk space.
Thanks: Marcos Mello for the suggestion
Closes grml/grml#69
Michael Prokop [Thu, 24 Aug 2017 22:06:35 +0000 (00:06 +0200)]
No longer ship mkdebmirror example script
License and current state (is it working at all) are unclear.
Michael Prokop [Thu, 17 Aug 2017 13:08:44 +0000 (15:08 +0200)]
Release new version 0.30.1
Michael Prokop [Thu, 17 Aug 2017 13:08:17 +0000 (15:08 +0200)]
Bump Standards-Version to 4.0.1
Antoine Beaupré [Sun, 19 Mar 2017 19:08:48 +0000 (15:08 -0400)]
SW: add stressant package to GRML_FULL
to quote from the control file:
> Stressant is a simple stress testing and burn-in tool
>
> It is designed to run on new machines to make sure they will work
> reliably by testing various parts of the system (CPU, RAM, disk,
> network) by putting them under heavy load and try to detect failures.
>
> As much as possible, stressant tries to reuse existing tools to
> perform the various tasks and aims to be run automatically.
it has just entered Debian sid and will pull at least 3 new
dependencies in (python-humanize, python-colorlog and stress-ng)
adding this is essential for the Stressant project to continue
collaborating with Grml.
Michael Prokop [Fri, 9 Jun 2017 20:52:56 +0000 (22:52 +0200)]
Release new version 0.30.0
Michael Prokop [Fri, 9 Jun 2017 20:45:21 +0000 (22:45 +0200)]
SW: add ed to GRML_FULL since it's also shipped on GRML_SMALL
Thanks: Darshaka Pathirana <dpat@syn-net.org>
for bringing this up in https://github.com/grml/grml-live/pull/43
Michael Prokop [Fri, 9 Jun 2017 20:43:53 +0000 (22:43 +0200)]
SW: drop tcpd from GRML_SMALL, not shipped on GRML_FULL
Thanks: Darshaka Pathirana <dpat@syn-net.org>
for bringing this up in https://github.com/grml/grml-live/pull/43
Michael Prokop [Fri, 9 Jun 2017 20:34:23 +0000 (22:34 +0200)]
SW: no longer ship grml2hd* packages via GRMLBASE
Usage of grml2hd is unrecommended and we don't test nor
support it anymore, so there's no reason why it should
be shipped.
Michael Prokop [Fri, 9 Jun 2017 20:32:29 +0000 (22:32 +0200)]
SW: drop packages from GRML_FULL that are already part of GRMLBASE
The following packages are part of GRMLBASE already and
shouldn't be listed in GRML_FULL therefore:
* dbus
* dmidecode
* grml-debootstrap
* grml-etc-core
* hdparm
* lvm2
* mdadm
* strace
Thanks to Darshaka Pathirana for triggering this via
https://github.com/grml/grml-live/pull/43
Michael Prokop [Fri, 9 Jun 2017 20:23:33 +0000 (22:23 +0200)]
SW: add lm-sensors to GRML_FULL
Thanks: Grégoire Sutre for suggestion
Closes grml/grml#48
Michael Prokop [Wed, 7 Jun 2017 21:25:34 +0000 (23:25 +0200)]
Support EFI on 32-bit systems, increase EFI image size + switch from isohybrid to xorriso/isohybrid combination
EFI on 32-bit systems is a requested feature for Grml-Forensic,
since cheap tablets and notebooks (e.g. Intel Atom-based tablets)
are out there with only 32-bit EFI support (and UEFI only, so no
legacy BIOS support), quoting clairelyclaire from
https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1341944:
| As of now, Ubuntu and other major Linux distributions do not
| support the use of a 32-bit EFI bootloader on UEFI machines. This
| has become extremely problematic due to the popularity of Intel
| Atom-based tablets and compact laptops. Atom-based devices are
| generally limited in storage space (32GB or 64GB eMMC is common),
| and as a result these devices almost universally ship with
| Windows 8.1 32-bit installed (winsxs consumes a significant
| amount of storage space in order to support 32-bit binaries in a
| 64-bit environment). By design, UEFI must use the same
| architecture used by the bootloader.
|
| While most modern computers indeed use a 64-bit UEFI
| implementation due to the fact that new computers generally ship
| with a 64-bit operating system (be it OS X or Windows 8.1),
| Atom-based devices do *not* use a 64-bit operating system or UEFI
| implementation. This is by design.
|
| Intel released a new Atom iteration (Bay Trail) in late 2013 and
| has indicated that they will continue to develop and release Atom
| CPUs due to consumer market demand. At the time of this filing
| there are a number of Atom-based tablets and compact
| laptops/netbooks being actively sold and marketed by major OEMs
| including Dell, HP, ASUS, and Acer. None of these devices have
| 64-bit UEFI firmware. It is also important to note that these
| Atom CPUs are 64-bit, but explicitly require a 32-bit UEFI
| bootloader.
|
| The current Linux kernel in Ubuntu 14.04 does support booting the
| 64-bit signed kernel from a 32-bit Grub EFI bootloader. I can
| confirm this on at least two 32-bit UEFI devices, the ASUS
| Transformer T100TA and the Acer Aspire Switch 10.
Increase EFI image size (previously automatically
calculated on-demand, resulting in ~285KB) to 4MB,
giving us more flexibility with what we're installing
into the image (esp. useful with usage on USB drives).
The isohybrid binary doesn't support 32-bit FI systems
and fails hard when using `--uefi` on a 32-bit ISO.
But xorriso with appropriate options for EFI usage
(see $EFI_ARGS) and /usr/lib/ISOLINUX/isohdpfx.bin
from the isolinux package seems to provide everything
we need.
Useful resources for further information:
* http://www.syslinux.org/wiki/index.php?title=Isohybrid
* https://fedoraproject.org/wiki/Using_UEFI_with_QEMU
* https://wiki.archlinux.org/index.php/Remastering_the_Install_ISO
For testing the resulting 32-bit ISO with EFI the
OVMF.fd file from OVMF-IA32-r15214.zip available from
https://sourceforge.net/projects/edk2/files/OVMF/ works via e.g.:
| qemu-system-i386 -m 1024 -bios ./OVMF.fd -cdrom grml.iso
Darshaka Pathirana [Fri, 2 Jun 2017 17:29:52 +0000 (19:29 +0200)]
templates: fix isolinux boot option label for grub
A long time ago (rev#
7d0f02a63) grub2 was introduced and the boot option
label grub was changed to grub1 (aside with grub2). Later grub1 support
was removed (rev#
bfbf9fb3). So it makes sense to change the grub2 label
to grub as we do not have anything else anymore.
Darshaka Pathirana [Wed, 31 May 2017 15:30:01 +0000 (17:30 +0200)]
Update cheatcodes documentation to clarify isolinux vs GRUB situation
The listed boot options / cheatcodes only work with the isolinux bootprompt.
Updated the documentation to make that clear.
Relates to grml/grml#9
Darshaka Pathirana [Wed, 31 May 2017 14:20:24 +0000 (16:20 +0200)]
templates: remove bootoption nostats
The stats feature was removed, therefore we also do not need the nostats
option anymore.
The stats feature was removed in grml-autconfig-commit#
7138a24fb
Relates to grml/grml#9
Michael Prokop [Wed, 7 Jun 2017 21:25:09 +0000 (23:25 +0200)]
Update comment regarding checksum generation
It's no longer just md5sum + sha1sum
Michael Prokop [Mon, 29 May 2017 17:27:16 +0000 (19:27 +0200)]
Release new version 0.29.7
Michael Prokop [Mon, 29 May 2017 17:21:43 +0000 (19:21 +0200)]
Get rid of /etc/network/if-up.d/aoe-discover
Closes grml/grml#47
Michael Prokop [Fri, 26 May 2017 21:38:39 +0000 (23:38 +0200)]
Release new version 0.29.6
Michael Prokop [Fri, 26 May 2017 21:20:44 +0000 (23:20 +0200)]
Delete /usr/lib/udev/rules.d/64-md-raid-assembly.rules to avoid automatic mdadm scanning
We don't want to automatically enable any present mdadm devices.
The safest way is to just remove
/usr/lib/udev/rules.d/64-md-raid-assembly.rules, since it doesn't
seem to provide a stable and long-term working way how to adjust
its behavior.
Closes grml/grml#45
Michael Prokop [Wed, 24 May 2017 12:34:12 +0000 (14:34 +0200)]
Release new version 0.29.5
Michael Prokop [Wed, 24 May 2017 12:30:40 +0000 (14:30 +0200)]
Switch from grml-runtty to agetty also on tty11 + tty12
Closes grml/grml#14 now that grml-runtty is only used with non-systemd systems
Darshaka Pathirana [Sun, 21 May 2017 17:56:58 +0000 (19:56 +0200)]
Run zsh when starting screen
When starting GNU/screen via systemd the SHELL varible is empty whereas
SHELL=/bin/zsh when starting screen via grml-runtty.
If we can assume that zsh is installed on Grml then this solution is ok.
If not, we should address that in the run-screen script with something like:
SHELL=/bin/sh
[ -x /bin/zsh ] && SHELL=/bin/zsh
# now run screen with config
if [ `id -u` = 0 ] ; then
exec screen -U -c /etc/grml/screenrc -s $SHELL
[snip]
(partly) fixes grml/grml#14
Darshaka Pathirana [Sun, 21 May 2017 17:34:32 +0000 (19:34 +0200)]
Get rid of grml-runtty
What once was done by grml-runtty can be now be accomplished by systemd.
That said, there is a weird behavior when starting GNU/screen via
"run-screen". When started via grml-runtty screen runs zsh, but
when started directly via systemd screen runs /bin/sh (= dash).
The reason for that is, that the SHELL variable is empty when called
directly via systemd whereas SHELL=/bin/zsh when started via
grml-runtty. I could not figure out why but a solution would be to set
the "Environment"-option in the systemd-unit which I will propose in a
separate commit.
(partly) fixes grml/grml#14
Darshaka Pathirana [Fri, 19 May 2017 23:39:13 +0000 (01:39 +0200)]
Switch from grml-runtty to agetty
grml-runtty used to fix most of the pre-systemd environment problems. It
seems that it causes more troubles nowadays than it solved back then.
First and foremost grml-runtty does not provide a (systemd) login
session which prevents us from starting X reliably. Therefor replacing
grml-runtty with agetty with autologin where a grml-shell is used so far.
tty1 to tty4, where grml-runtty starts run-welcome (grml-quickconfig),
two root- and a grml-GNU-screen session, should also be replaced with a
proper systemd-unit.
Relates to grml/grml#14 and grml/grml#20
Michael Prokop [Fri, 19 May 2017 14:42:58 +0000 (16:42 +0200)]
SW: add haveged to GRMLBASE [Closes: issue1336]
It's useful especially on VMs with low entropy, so provide it by default.
Michael Prokop [Fri, 19 May 2017 14:39:36 +0000 (16:39 +0200)]
SW: add rng-tools to GRMLBASE [Closes: issue1336]
Michael Prokop [Fri, 19 May 2017 13:58:16 +0000 (15:58 +0200)]
Provide consistent header information for all /etc/systemd/ files that are deployed via grml-live
Thomas Stewart [Fri, 19 May 2017 11:59:47 +0000 (12:59 +0100)]
Warn in initramfs if there is <256MM memory
Closes grml/grml#35
Darshaka Pathirana [Fri, 19 May 2017 13:15:24 +0000 (15:15 +0200)]
TTY6/VT6 should start a shell if bootoption startx is not given
When the bootoption "startx" is given, the helper-script
"/etc/init.d/startx" is created during the bootprocess (via
grml-autoconfig).
That means, that if the booptions "startx" is not given, the
helper-script is not created and tty6/vt6 should not try to start X but
should just start a grml-user-shell.
Related to grml/grml#20
Michael Prokop [Thu, 18 May 2017 15:41:13 +0000 (17:41 +0200)]
Enable systemd specific debug boot options in debugging mode
See grml/grml#3
Michael Prokop [Thu, 18 May 2017 15:00:41 +0000 (17:00 +0200)]
Disable automatic 'ATA over Ethernet discovery'
/usr/lib/modules-load.d/aoetools.conf by default contains:
| ## If you need to restrict the interfaces aoe will use, copy this
| ## file to /etc/modules-load.d/ and use this example:
| # aoe aoe_iflist="eth0,eth1"
|
| ## Load aoe driver with no interface restriction:
| aoe
and /lib/systemd/system/aoe-discover.service contains:
| [Unit]
| Description=ATA over Ethernet discovery
| BindsTo=sys-devices-virtual-aoe-discover.device
| DefaultDependencies=no
| Conflicts=shutdown.target
| After=network-online.target
|
| [Service]
| Type=oneshot
| ExecStart=/sbin/aoe-discover
Since the aeotools.conf file tells systemd to load the aoe module
which then triggers the udev rule we end up with automatic
aoe-discover execution on default Grml boot, even though we
disable the aoe-discover service (since enabling/disabling only
affects starting via transitive dependencies, but the udev rule
is doing the equivalent of `systemctl start $unit`). By removing
/usr/lib/modules-load.d/aoetools.conf we ensure that automatic
'ATA over Ethernet discovery' is NOT executed, though if a user
runs 'modprobe aoe' it executes aoe-discover as intended.
Thanks: Felipe Sateler + Darshaka Pathirana for help in coming up with a solution
Closes grml/grml#32
Michael Prokop [Tue, 16 May 2017 22:29:17 +0000 (00:29 +0200)]
SW: add cpufrequtils to GRML_SMALL
It adds only ~250kb of additional disk space and provides
/etc/init.d/loadcpufreq which we use in grml-autoconfig.
Closes grml/grml#24
Michael Prokop [Tue, 16 May 2017 22:02:12 +0000 (00:02 +0200)]
Enable autologin for user root on serial console ttyS0
Closes grml/grml#21
Michael Prokop [Tue, 16 May 2017 21:13:12 +0000 (23:13 +0200)]
GRUB theme: replace desktop-color with desktop-image
With the desktop-color option we run into:
| error: null src bitmap in grub_video_bitmap_create_scaled.
| Loading kernel...
| Loading initrd...
|
| Press any key to continue...
By replacing it with this small black.png as desktop-image (which
is automatically stretched to the whole screen) the error message
disappears.
Closes grml/grml#16
Thanks: Michael Schierl <schierlm@gmx.de>
Michael Prokop [Tue, 16 May 2017 12:49:16 +0000 (14:49 +0200)]
Release new version 0.29.4
Michael Prokop [Tue, 16 May 2017 12:47:46 +0000 (14:47 +0200)]
Revert "SW: provide xserver-xorg-video-intel on GRML_FULL"
This reverts commit
487e689322d6ec9c4336f0b337fd5ed54267358e.
Quoting from the package description:
| The use of this driver is discouraged if your hw is new enough (ca.
| 2007 and newer). You can try uninstalling this driver and let the
| server use it's builtin modesetting driver instead.
Thanks: Axel Beckert for the hint
Michael Prokop [Fri, 12 May 2017 18:50:07 +0000 (20:50 +0200)]
Ensure that tty1 console is starting *after* grml-autoconfig execution
Thanks: Darshaka Pathirana <dpat@syn-net.org>
Closes grml/grml#19
Michael Prokop [Fri, 12 May 2017 14:39:00 +0000 (16:39 +0200)]
Delete /lib/udev/rules.d/69-lvm-metad.rules to avoid automatic LVM scanning
This might not be enough yet according to initial tests, but
it's something we want to disable for sure.
See grml/grml#31
Michael Prokop [Fri, 12 May 2017 14:35:23 +0000 (16:35 +0200)]
No longer mask systemd-machine-id-commit.service
Masking the systemd-machine-id-commit.service causes
all kinds of problems with logins (local as well as via
ssh, causing sloooooow logins). Nowadays the overlayfs
bug also doesn't seem to be present anymore.
Closes grml/grml#27
Michael Prokop [Fri, 12 May 2017 14:11:41 +0000 (16:11 +0200)]
GRMLBASE/49-sshd: ensure that login as root via password works again
openssh defaults to "prohibit-password" since openssh-server v1:7.1p1-1,
breaking our existing change regarding without-password.
While at it also improve the script to not readd the PermitRootLogin
and UseDNS configs with every single run, instead check for our
own modifications and skip them in further runs.
Closes grml/grml#12
Michael Prokop [Fri, 12 May 2017 14:05:55 +0000 (16:05 +0200)]
SW: provide xserver-xorg-video-intel on GRML_FULL
For unknown reasons xserver-xorg-video-intel suddenly became
only a Recommends instead of a dependency of xserver-xorg-video-all:
| .../xorg (git)-[debian-unstable] % git show
af937437
| commit
af937437e6e6a6f34ee247ad2f3aefbd91d7444e
| Author: Timo Aaltonen <tjaalton@debian.org>
| Date: Tue Mar 8 15:07:25 2016 +0200
|
| Instead of dropping -intel from -video-all demote it to Recommends.
As a result this package was missing on our Grml ISOs.
Closes grml/grml#20
Michael Prokop [Tue, 9 May 2017 14:29:46 +0000 (16:29 +0200)]
SW: add lsscsi to GRML_SMALL
Thanks: András Korn
Michael Prokop [Fri, 5 May 2017 15:56:19 +0000 (17:56 +0200)]
Release new version 0.29.3
Michael Prokop [Fri, 5 May 2017 14:45:39 +0000 (16:45 +0200)]
Set grml-docs/startpage.html + grml.org as start pages in Firefox
Closes grml/grml#18
Darshaka Pathirana [Fri, 5 May 2017 13:33:27 +0000 (15:33 +0200)]
Use Firefox as default browser if present and drop iceweasel config
The "Iceweasel Age"[1] has ended and we can use Firefox again and
therefore use firefox as x-www-browser.
Unfortunately overriding the default homepage via
/etc/iceweasel/profile/prefs.js does not work anymore therefor dropping
the iceweasel configuration. (See: grml/grml#18)
[1] https://lwn.net/Articles/676799/
Closes grml/grml#15
Michael Prokop [Fri, 5 May 2017 08:55:10 +0000 (10:55 +0200)]
Release new version 0.29.2
Michael Prokop [Wed, 3 May 2017 09:53:08 +0000 (11:53 +0200)]
SW: add linux-cpupower to GRML_FULL
Darshaka Pathirana [Sun, 23 Apr 2017 23:52:38 +0000 (01:52 +0200)]
Make startx boot option work with systemd
The desired behavior (with systemd and the boot option "startx") is to start
the X window system automatically.
This is achieved by getty@tty6.service which starts grml-x as user "grml" on
vt6/tty6 and switches back to vt1/tty1 after exit. (This alone could be
achieved with systemd-unit option Type=oneshot and Restart=no). But when
switiching back to vt6/tty6 (again) we would like to start a zsh (for user
"grml") and restart the zsh if exited. That means that grml-x should only be
started on the very first run and the zsh on every other.
We could not figure out how to change the systemd-unit option "Type"
dynamically, so we kept it on "idle" which means that the "actual execution of
the service binary is delayed until all active jobs are dispatched". That's why
we need to switch to vt6/tty6 (via grml-autoconfig) iff the boot option
"startx" is given.
We also do not know yet how to dynamically change the behavior of the
systemd-unit in a safe way. Rewriting the unit-file (override.conf) after
grml-x exits (i.e. with ExecStopPost) doesn't seem to work reliably (especially
when calling "systemctl daemon-reload" in it). That's why we use a state-file
(/var/run/grml_startx.started) to start up grml-x on the first call and the zsh
else.
This also means that grml-x is started automatically when switching to vt6/tty6
manually (when no "startx" boot option was given) once and the zsh on the
following calls.
Closes grml/grml#1
Michael Prokop [Fri, 21 Apr 2017 12:31:09 +0000 (14:31 +0200)]
deborphan: add qemu-kvm to list of packages which are never to be reported
In commit
ec12218051e8c1 we added qemu-system-x86 as underlying
dependency for qemu-kvm, now qemu-kvm is considered for removal.
This seems to be the case because qemu-kvm depends on
qemu-system-x86 and and even though we explicitely ask for both
packages to be installed, then qemu-kvm is considered for
removal. Let's avoid this by adding qemu-kvm to the list of
packages which are never to be reported by deborphan, then it's
not automatically removed via DEBORPHAN/98-clean-chroot.
Noticed via "grml-live-missing-packages.test_missing_packages_qemu-kvm"
in Jenkins daily builds.
Michael Prokop [Fri, 21 Apr 2017 12:17:29 +0000 (14:17 +0200)]
SW: replace transitional package iptraf with iptraf-ng
Noticed by grml-live's test-suite inside Jenkins