esac
}
+# Check if currently using a framebuffer
+hasfb() {
+ [ -e /dev/fb0 ] && return 0 || return 1
+}
+
# Check wheter a configuration variable (like $CONFIG_TOHD) is
# enabled or not
checkvalue(){
grep -q small /etc/grml_version 2>>$DEBUG && return 0 || return 1
}
-# execute flite only if it's present
-flitewrapper() {
- [ -x /usr/bin/flite ] && flite -o play -t "$*"
-}
### }}}
# {{{ filesystems (proc, pts, sys) and fixes
einfo "Bootparameter log found. Log files: ${DEBUG} and /var/log/boot"
eindent
einfo "Starting bootlogd." # known to be *very* unreliable :(
- bootlogd -r -c 1>>$DEBUG 2>&1 ; eend $?
+ bootlogd -r -c >>$DEBUG 2>&1 ; eend $?
eoutdent
else
DEBUG="/dev/null"
if checkbootparam 'fwtimeout' ; then
TIMEOUT="$(getbootparam 'fwtimeout' 2>>$DEBUG)"
einfo "Bootoption fwtimeout found. (Re)Loading firmware_class module."
- rmmod firmware_class 1>>$DEBUG 2>&1
+ rmmod firmware_class >>$DEBUG 2>&1
modprobe firmware_class ; eend $?
fi
if [ -z "$TIMEOUT" ] ; then
einfo "Activating language settings:"
eindent
- # people can specify $LANGUAGE and $CONSOLEFONT in a config file:
+ # people can specify $LANGUAGE and $CONSOLEFONT in a config file
[ -r /etc/grml/autoconfig ] && . /etc/grml/autoconfig
- grep -q ' lang=.*-utf8' /proc/cmdline && UTF8='yes' || UTF8=''
-
- # check for bootoption which overrides config from /etc/grml/autoconfig:
+ # check for bootoption which overrides config from /etc/grml/autoconfig
BOOT_LANGUAGE="$(getbootparam 'lang' 2>>$DEBUG)"
[ -n "$BOOT_LANGUAGE" ] && LANGUAGE="$BOOT_LANGUAGE"
- # set default to 'en' in live-cd mode if $LANGUAGE is not yet set:
+ # set default to 'en' in live-cd mode iff $LANGUAGE is not set yet
if [ -z "$INSTALLED" ] ; then
- [ -n "$LANGUAGE" ] || LANGUAGE='us'
+ [ -n "$LANGUAGE" ] || LANGUAGE='en'
fi
- # if bootoption lang is used update /etc/default/locale, otherwise *not*!
- if [ -n "$BOOT_LANGUAGE" -a -x /usr/sbin/grml-setlang ] ; then
- if checkgrmlsmall ; then
- /usr/sbin/grml-setlang "POSIX"
- else
- /usr/sbin/grml-setlang "$LANGUAGE"
- fi
+ if [ -x /usr/sbin/grml-setlang ] ; then
+ # if bootoption lang is used update /etc/default/locale accordingly
+ if [ -n "$BOOT_LANGUAGE" ] ; then
+ checkgrmlsmall && /usr/sbin/grml-setlang "POSIX" || /usr/sbin/grml-setlang "$LANGUAGE"
+ # otherwise default to lang=en
+ else
+ checkgrmlsmall && /usr/sbin/grml-setlang "POSIX" || /usr/sbin/grml-setlang "en"
+ fi
fi
# set console font
if [ -z "$CONSOLEFONT" ] ; then
if ! checkbootparam 'nodefaultfont' >>$DEBUG 2>&1 ; then
- # [ -n "$UTF8" ] && CONSOLEFONT='LatArCyrHeb-16' || CONSOLEFONT='Lat15-Terminus16'
- # if [ -r /usr/share/consolefonts/Lat15-Terminus16.psf.gz ] ; then
if [ -r /usr/share/consolefonts/Uni3-Terminus16.psf.gz ] ; then
CONSOLEFONT='Uni3-Terminus16'
else
ewarn "/usr/share/consolefonts/Uni3-Terminus16.psf.gz not available. Please upgrade package console-terminus." ; eend 1
fi
+ if ! hasfb ; then
+ CONSOLEFONT='Lat15-Terminus16'
+ fi
fi
fi
if [ -r /etc/default/locale ] ; then
if grep -q "LANG=.*UTF" /etc/default/locale ; then
einfo "Setting up unicode environment."
- unicode_start ; eend $?
+ unicode_start >>$DEBUG 2>&1 ; eend $?
fi
fi
fi
# we have to set up all consoles, therefore loop it over all ttys:
- NUM_CONSOLES=$(fgconsole --next-available)
- NUM_CONSOLES=$(expr ${NUM_CONSOLES} - 1)
- [ ${NUM_CONSOLES} -eq 1 ] && NUM_CONSOLES=6
- CUR_CONSOLE=$(fgconsole)
+ NUM_CONSOLES=$(fgconsole --next-available 2>/dev/null)
+ if [ -n "$NUM_CONSOLES" ] ; then
+ NUM_CONSOLES=$(expr ${NUM_CONSOLES} - 1)
+ [ ${NUM_CONSOLES} -eq 1 ] && NUM_CONSOLES=6
+ fi
+ CUR_CONSOLE=$(fgconsole 2>/dev/null)
+
+ if [ -x "$(which setfont)" ] ; then
+ use_setfont=true
+ elif [ -x "$(which consolechars)" ] ; then
+ use_consolechars=true
+ else
+ eerror "Neither setfont nor consolechars tool present, can not set font."
+ eend 1
+ return 1
+ fi
if [ -n "$CHARMAP" ] ; then
- einfo "Running consolechars for ${CHARMAP}"
- for vc in `seq 0 ${NUM_CONSOLES}` ; do
- consolechars --tty=/dev/tty${vc} -m ${CHARMAP} ; RC=$?
+ einfo "Setting font to ${CHARMAP}"
+ RC=0
+ for vc in $(seq 0 ${NUM_CONSOLES}) ; do
+ if $use_setfont ; then
+ setfont -C /dev/tty${vc} $CHARMAP ; RC=$?
+ elif $use_consolechars ; then
+ consolechars --tty=/dev/tty${vc} -m ${CHARMAP} ; RC=$?
+ fi
done
- [ -n "$CUR_CONSOLE" ] && chvt $CUR_CONSOLE
+ if [ -n "$CUR_CONSOLE" ] ; then
+ [ "$CUR_CONSOLE" != "serial" ] && chvt $CUR_CONSOLE
+ fi
eend $RC
fi
ewarn "Skipping setting console font as requested on boot commandline." ; eend 0
else
if [ -n "$CONSOLEFONT" ] ; then
- einfo "Running consolechars using ${CONSOLEFONT}"
- for vc in `seq 0 ${NUM_CONSOLES}` ; do
- consolechars --tty=/dev/tty${vc} -f $CONSOLEFONT ; RC=$?
+ einfo "Setting font to ${CONSOLEFONT}"
+ RC=0
+ for vc in $(seq 0 ${NUM_CONSOLES}) ; do
+ if $use_setfont ; then
+ setfont -C /dev/tty${vc} ${CONSOLEFONT} ; RC=$?
+ elif $use_consolechars ; then
+ consolechars --tty=/dev/tty${vc} -f ${CONSOLEFONT} ; RC=$?
+ fi
done
- [ -n "$CUR_CONSOLE" ] && chvt $CUR_CONSOLE
- eend $?
+ if [ -n "$CUR_CONSOLE" ] ; then
+ [ "$CUR_CONSOLE" != "serial" ] && chvt $CUR_CONSOLE
+ fi
+ eend $RC
fi
fi
config_hostname(){
if checkbootparam 'hostname' ; then
HOSTNAME="$(getbootparam 'hostname' 2>>$DEBUG)"
+ if [ -z "$HOSTNAME" ] && [ -x /usr/bin/random-hostname ] ; then
+ einfo "Generating random hostname as no hostname was specified."
+ HOSTNAME="$(/usr/bin/random-hostname)"
+ eend $?
+ fi
einfo "Setting hostname to $HOSTNAME as requested."
- sed -i "s/^127.0.0.1.*localhost/127.0.0.1 $HOSTNAME localhost/" /etc/hosts
- hostname $HOSTNAME ; eend $?
+ grml-hostname $HOSTNAME >>$DEBUG ; RC=$?
+ [ "$RC" = "0" ] && hostname $HOSTNAME
+ eend $RC
else
hostname --file /etc/hostname
fi
}
# }}}
-# {{{ vmware specific stuff
-config_vmware(){
-if checkbootparam 'novmware' ; then
- ewarn "Skipping running vmware specific stuff as requested on boot commandline." ; eend 0
-else
- if [ -z "$INSTALLED" ] ; then
- if vmware-detect || checkbootparam "BOOT_IMAGE=vmware" ; then
- if ! checkbootparam 'qemu' ; then
- if [ -r /etc/X11/xorg.conf.vmware ] ; then
- einfo "VMware: Copying /etc/X11/xorg.conf.vmware to /etc/X11/xorg.conf"
- cp /etc/X11/xorg.conf.vmware /etc/X11/xorg.conf ; eend $?
- fi
- fi
- elif [ -r /proc/acpi/battery/BAT0/info -a -r /etc/X11/xorg.conf.virtualbox ] ; then
- if grep -q 'OEM info: innotek' /proc/acpi/battery/BAT0/info ; then
- einfo 'Virtual Box: Copying /etc/X11/xorg.conf.virtualbox to /etc/X11/xorg.conf'
- cp /etc/X11/xorg.conf.virtualbox /etc/X11/xorg.conf ; eend $?
- fi
- fi
- fi
-fi
-}
-# }}}
-
-# {{{ qemu specific stuff
-config_qemu(){
-if checkbootparam 'qemu' ; then
- if [ -r /etc/X11/xorg.conf.example ] ; then
- einfo "Qemu: Copying /etc/X11/xorg.conf.example to /etc/X11/xorg.conf"
- cp /etc/X11/xorg.conf.example /etc/X11/xorg.conf ; eend $?
- fi
-fi
-}
-# }}}
-
# {{{ ld.so.cache + depmod
config_ld_mod(){
if [ -n "$INSTALLED" ]; then
# activate serial console {{{
config_console(){
if checkbootparam 'console'; then
- einfo "Bootoption (for serial) console detected."
- eindent
- if [ -r /etc/mgetty/mgetty.config ] ; then
- MODE=$(getbootparam 'console' | awk -F, '{print $2}')
- MODE=${MODE%%n*}
- [ -n "$MODE" ] || MODE=9600 # default mode
- einfo "Setting speed in /etc/mgetty/mgetty.config to $MODE bps"
- sed -i "s/speed [0-9]*/speed $MODE/" /etc/mgetty/mgetty.config ; eend $?
- fi
+ local line
+ local ws
+ ws=' '
- einfo "Activating mgetty."
- sed -i 's/^#T0/T0/' /etc/inittab
- sed -i 's/^#T1/T1/' /etc/inittab
- /sbin/telinit q ; eend $?
- eoutdent
-fi
-}
-# }}}
+ einfo "Bootoption for serial console detected:"
+
+ line="$CMDLINE x "
+ this=""
+ line="${line#*[$ws]}"
+ local telinitq=""
+ while [ -n "$line" ]; do
+ case "$this" in
+ console=*)
+ local serial="$this"
+ local device="${this%%,*}"
+ local device="${device##*=}"
+ if echo $serial | grep -q ttyS ; then
+ local option="${serial##*,}"
+ # default (works for kvm & CO):
+ local speed="115200,57600,38400,19200,9600,4800,2400,1200";
+ # ... unless overriden by command line:
+ case "$option" in
+ 115200*) speed=115200 ;;
+ 57600*) speed=57600 ;;
+ 38400*) speed=38400 ;;
+ 19200*) speed=19200 ;;
+ 9600*) speed=9600 ;;
+ 4800*) speed=4800 ;;
+ 2400*) speed=2400 ;;
+ 1200*) speed=1200 ;;
+ esac
+ eindent
+ einfo "Activating console login on device ${device} with speed ${speed}."
+ local number="${device#ttyS}"
+ sed -i "/^T$number:/d;/^#grmlserial#/iT$number:23:respawn:/bin/bash -c \"/sbin/getty -L $device -l /usr/share/grml-scripts/run-welcome $speed vt100 || sleep 30\"" /etc/inittab
+ eend $?
+ telinitq="1"
+ eoutdent
+ fi
+ ;;
+ esac
+ this="${line%%[$ws]*}"
+ line="${line#*[$ws]}"
+ done
-# For burning on IDE-CD-Roms, k3b (and others) check for special permissions {{{
-config_cdrom_perm(){
-CDROMS=""
-for DEVICE in /proc/ide/hd?; do
- [ "$(cat $DEVICE/media 2>/dev/null)" = "cdrom" ] && CDROMS="$CDROMS /dev/${DEVICE##*/}"
-done
-[ -n "$CDROMS" ] && { chown root.cdrom $CDROMS; chmod 666 $CDROMS; } 2>/dev/null
+ if [ -n "$telinitq" ]; then
+ /sbin/telinit q
+ fi
+ eend $?
+fi
}
# }}}
}
# }}}
-# firewire devices {{{
-# the raw1394 driver does not yet export info into SYSFS,
-# so let's create raw1394 device manually
-# http://www.michael-prokop.at/blog/index.php?p=352
-config_firewire_dev(){
-if checkbootparam 'nofirewiredev' ; then
- ewarn "Skipping creating some firewire devices as requested on boot commandline." ; eend 0
-else
-#if [ "${KERNEL%-*}" == "2.6.11" ] ; then
- einfo "Creating some firewire devices (fix kernel 2.6-bug)."
-# cd /dev && MAKEDEV video1394 raw1394
- [ -r /dev/raw1394 ] || mknod /dev/raw1394 c 171 0
- [ -r /dev/video1394 ] || mknod -m 666 /dev/video1394 c 171 16
-# mknod -m 666 /dev/dv1394 c 171 32 # for NTSC
- [ -r /dev/dv1394 ] || mknod -m 666 /dev/dv1394 c 171 34 # for PAL
- chown -R root:video /dev/raw1394 /dev/video1394 /dev/dv1394
- chmod -R 664 /dev/raw1394 /dev/video1394 /dev/dv1394 ; eend $?
-fi
-#fi
-}
-# }}}
-
# {{{ copy passwd-lockfile to ramdisk (fix unionfs-behaviour)
# otherwise we will get: passwd: Authentication token lock busy
config_fix_passwd(){
}
# }}}
-# {{{ hardware detection via discover
-config_discover(){
-if checkbootparam 'nodisc' ; then
- ewarn "Skipping hardware detection via discover as requested on boot commandline." ; eend 0
-else
- if [ -x /sbin/discover ] ; then
- einfo "Discovering hardware. Trying to load the following modules in background:"
- eindent
- einfo "$(discover --data-path=linux/module/name --data-path=linux/modules/options --format="%s %s" --data-version=`uname -r` --enable-bus all | sort -u | xargs echo)"
- eoutdent
- /sbin/discover-modprobe -v 1>>$DEBUG 2>&1 &
- eend 0
- else
- eerror "Application discover not available. Information: udev should handle hardware recognition." ; eend 0
- fi
-fi
-}
-# }}}
-
-# {{{ hardware detection via hwinfo
-config_hwinfo(){
-if checkbootparam 'hwinfo' >>$DEBUG 2>&1; then
- einfo "Discovering hardware via hwinfo:"
- MODULES=$(su grml hwinfo | grep "Cmd: \"modprobe" | awk '{print $5}' | sed 's/"//')
- echo -n " Loading modules: "
- for i in `echo $MODULES` ; do echo -n $i && modprobe $i ; done
- eend 0
-fi
-}
-# }}}
-
-# {{{ disable hotplug agents on request
-config_hotplug_agent(){
-if checkbootparam 'noagent' ; then
- AGENT="$(getbootparam 'noagent' 2>>$DEBUG)"
- AGENTLIST=$(echo "$AGENT" | sed 's/,/\\n/g')
- AGENTNL=$(echo "$AGENT" | sed 's/,/ /g')
- einfo "Disabling hotplug-agent(s) $AGENTNL"
- for agent in $(echo -e $AGENTLIST) ; do
- mv /etc/hotplug/${agent}.rc /etc/hotplug/${agent}.norc
- done
- [ "$?" == "0" ] ; eend $?
-fi
-}
-# }}}
-
-# {{{ blacklist of hotplug-modules
-config_hotplug_blacklist(){
-if checkbootparam 'black' ; then
- BLACK="$(getbootparam 'black' 2>>$DEBUG)"
- BLACKLIST=$(echo "$BLACK" | sed 's/,/\\n/g')
- BLACKNL=$(echo "$BLACK" | sed 's/,/ /g')
- einfo "Blacklisting $BLACKNL via /etc/hotplug/blacklist.d/hotplug-light"
- echo -e "$BLACKLIST" >> /etc/hotplug/blacklist.d/hotplug-light
- echo -e "$BLACKLIST" >> /etc/hotplug/blacklist
- eend 0
-fi
-}
-# }}}
-
-# {{{ run hotplug
-config_hotplug(){
-if checkbootparam 'nohotplug' ; then
- ewarn "Skipping running hotplug as requested on boot commandline." ; eend 0
-else
- if [ -r /etc/init.d/hotplug ] ; then
- einfo "Starting hotplug system in background."
- /etc/init.d/hotplug start 1>>$DEBUG 2>>$DEBUG &
- eend 0
- elif [ -r /etc/init.d/hotplug-light ] ; then
- einfo "Starting hotplug-light system in background."
- /etc/init.d/hotplug-light start 1>>$DEBUG 2>>$DEBUG &
- eend 0
- else
- ewarn "No hotplug system found. Should be handled by udev. Skipping execution." ; eend 0
- fi
-fi
-}
-# }}}
-
# {{{ blacklist specific module [ used in /etc/init.d/udev ]
config_blacklist(){
if checkbootparam 'blacklist' ; then
else
ewarn "(none)" ; eend 1
fi
- if ! ps x | grep -q /usr/sbin/acpid ; then
+ if ! ps x 2>>$DEBUG | grep -q /usr/sbin/acpid ; then
if ! [ -r /var/run/dbus/pid ] ; then
einfo "Starting acpi daemon."
- /etc/init.d/acpid start 1>>$DEBUG 2>&1 ; eend $?
+ /etc/init.d/acpid start >>$DEBUG 2>&1 ; eend $?
else
eerror "acpid error: it seems you are running d-bus/hal, but acpid needs to be started before d-bus."
eerror "Solution: please activate acpid via /etc/runlevel.conf"
}
# }}}
-# {{{ PCMCIA Check/Setup
-# This needs to be done before other modules are being loaded (by hwsetup)
-config_pcmcia(){
-if checkbootparam 'nopcmcia'; then
- ewarn "Skipping PCMCIA detection as requested on boot commandline." ; eend 0
-else
- if /usr/sbin/laptop-detect ; then
- einfo "Detected Laptop - checking for PCMCIA." && eend 0
- modprobe pcmcia_core >>$DEBUG 2>&1
- # Try Cardbus or normal PCMCIA socket drivers
- modprobe yenta_socket >>$DEBUG 2>&1 || modprobe i82365 >>$DEBUG 2>&1 || modprobe pd6729 >>$DEBUG 2>&1 || modprobe tcic >>$DEBUG 2>&1
- if [ "$?" = "0" ]; then
- modprobe ds >>$DEBUG 2>&1
- if [ -d /proc/bus/pccard ] ; then
- if [ -x /sbin/cardmgr ] ; then
- einfo "PCMCIA found, starting cardmgr."
- cardmgr >>$DEBUG 2>&1 && sleep 6 && eend 0
- else
- eerror "No cardmgr found. Make sure package pcmciautils is installed, it should handle it instead." ; eend 1
- fi
- fi
- fi
- fi
-fi
-}
-# }}}
-
-# {{{ run software synthesizer via speakup
-config_swspeak(){
- if checkbootparam 'swspeak' ; then
- einfo "Bootoption swspeak found."
-
- if [ ! -d /proc/speakup/ ] && ! grep -q speakup_soft /proc/modules ; then
- ewarn "Kernel does not support software speakup - trying to load kernel module:" ; eend 0
- eindent
- einfo "Loading speakup_soft"
- if modprobe speakup_soft ; then
- eend 0
- else
- flitewrapper "Fatal error setting up software speakup"
- eend 1
- return 1
- fi
- eoutdent
- fi
-
- if [ -d /proc/speakup/ ] || grep -q speakup_soft /proc/modules ; then
- einfo "Kernel supports speakup." ; eend 0
- eindent
- einfo "Just run swspeak if you want to use software synthesizer via speakup."
- flitewrapper "Finished activating software speakup. Just run swspeak when booting finished."
- eoutdent
- else
- eerror "Kernel does not seem to support speakup. Skipping swspeak." ; eend 1
- flitewrapper "Kernel does not seem to support speakup. Sorry."
- fi
- fi
-}
-# }}}
-
-# {{{ support hardware synthesizer via speakup
-config_hwspeak(){
- if checkbootparam 'speakup.synth' ; then
- einfo "Bootoption speakup.synth found."
- eindent
-
- module="$(getbootparam 'speakup.synth' 2>>$DEBUG)"
- if [ -z "$module" ] ; then
- eerror "Sorry, no speakup module specified for bootoption speakup.synth."
- flitewrapper "Sorry, no speakup module specified for bootoption speakup.synth."
- else
- einfo "Trying to load $module"
- modprobe "speakup_${module}"
- eend $?
- fi
-
- if [ -d /proc/speakup/ ] || grep -q speakup /proc/modules ; then
- einfo "Kernel should support speakup now." ; eend 0
- flitewrapper "Kernel should support speakup now."
- else
- eerror "Kernel or hardware do not seem to support speakup. Skipping hwspeak." ; eend 1
- flitewrapper "Kernel or hardware do not seem to support speakup. Sorry."
- fi
-
- eoutdent
-
- # hwspeak:
- elif checkbootparam 'hwspeak' ; then
- einfo "Bootoption hwspeak found."
-
- if [ ! -d /proc/speakup/ ] && ! grep -q speakup /proc/modules ; then
- ewarn "Kernel does not support hardware speakup - trying to load kernel modules:" ; eend 0
- eindent
- if ! [ -d "/lib/modules/${KERNEL}/extra/speakup/" ] ; then
- eerror "Kernel does not provide speakup modules, sorry." ; eend 1
- else
- for module in $(find "/lib/modules/${KERNEL}/extra/speakup/" -name \*.ko | \
- sed 's#.*speakup/##g ; s#.ko$##g' | \
- grep -ve speakup_soft -ve speakup_dummy | sort -u) ; do
- einfo "Trying to load $module"
- modprobe $module
- eend $?
- done
- fi
- eoutdent
- fi
-
- if [ -d /proc/speakup/ ] || grep -q speakup /proc/modules ; then
- einfo "Kernel should support speakup now." ; eend 0
- flitewrapper "Kernel should support speakup now."
- else
- eerror "Kernel or hardware do not seem to support speakup. Skipping hwspeak." ; eend 1
- flitewrapper "Kernel or hardware do not seem to support speakup. Sorry."
- fi
- fi
-}
-# }}}
-
-# {{{ Check for blind option or brltty
-config_blind(){
-BLIND=""
-checkbootparam 'blind' && BLIND="yes"
-BRLTTY="$(getbootparam 'brltty' 2>>$DEBUG)"
-
-if [ -n "$BLIND" -o -n "$BRLTTY" ]; then
- if [ -x /sbin/brltty ]; then
- # Blind option detected, start brltty now.
- # modprobe serial_core parport_serial generic_serial && echo "done"
- CMD=brltty
- BRLTYPE=""
- BRLDEV=""
- BRLTEXT=""
- if [ -n "$BRLTTY" ]; then
- # Extra options
- BRLTYPE="${BRLTTY%%,*}"
- R="${BRLTTY#*,}"
- if [ -n "$R" -a "$R" != "$BRLTTY" ]; then
- BRLTTY="$R"
- BRLDEV="${BRLTTY%%,*}"
- R="${BRLTTY#*,}"
- if [ -n "$R" -a "$R" != "$BRLTTY" ]; then
- BRLTTY="$R"
- BRLTEXT="${BRLTTY%%,*}"
- R="${BRLTTY#*,}"
- fi
- fi
- fi
- [ -n "$BRLTYPE" ] && CMD="$CMD -b $BRLTYPE"
- [ -n "$BRLDEV" ] && CMD="$CMD -d $BRLDEV"
- [ -n "$BRLTEXT" ] && CMD="$CMD -t $BRLTEXT"
- einfo "Starting braille-display manager."
-# ( exec $CMD & )
- ( sh -c "$CMD" & )
- sleep 2 && BLINDSOUND="yes"
- eend 0
- fi
-fi
-}
-# }}}
-
-# {{{ Interactive configuration
-config_interactive(){
- ewarn "config_interactive is deprecated nowadays."
- ewarn "Please set CONFIG_INTERACTIVE='no' in /etc/grml/autoconfig" ; eend 0
-}
-# }}}
-
# {{{ AGP
config_agp(){
if checkbootparam 'forceagp' ; then
}
# }}}
-# {{{ automount(er)
-config_automounter(){
-if checkbootparam 'automounter' ; then
- RUNLEVEL="$(runlevel)"
- AUTOMOUNTER=""
- [ -x /etc/init.d/autofs ] && [ "$RUNLEVEL" != "N 1" ] && [ "$RUNLEVEL" != "N S" ] && AUTOMOUNTER="yes"
-
-addautomount(){
-# /dev/ice options
- d="${1##*/}"
- if [ -n "$AUTOMOUNTER" ]; then
- [ -d "/mnt/$d" -a ! -L "/mnt/$d" ] && rmdir /mnt/$d
- [ -d "/mnt/auto/$d" ] || mkdir -p "/mnt/auto/$d"
- [ -L "/mnt/$d" ] || ln -s "/mnt/auto/$d" "/mnt/$d"
- anew="$d -fstype=auto,$2 :$i"
- grep -q "$anew" "/etc/auto.mnt" || echo "$anew" >> /etc/auto.mnt
- AUTOMOUNTS="$AUTOMOUNTS $d"
- new="$1 /mnt/auto/$d auto users,noauto,exec,$2 0 0"
- else
- [ -d /mnt/$d ] && mkdir -p /mnt/$d
- new="$1 /mnt/$d auto users,noauto,exec,$2 0 0"
- fi
- grep -q "$new" "/etc/fstab" || echo "$new" >> /etc/fstab
-}
-
- AUTOMOUNTS="floppy cdrom"
-# Add new devices to /etc/fstab and /etc/auto.mnt
- for i in /dev/cdrom?*; do
- if [ -L $i ]; then
- addautomount "$i" "ro"
- fi
- done
-fi
-
-if [ -n "$AUTOMOUNTER" ]; then
-# Check for floppy dir, reinstall with automounter
- [ -d /mnt/floppy -a ! -L /mnt/floppy ] && rmdir /mnt/floppy
- [ -d /mnt/auto/floppy ] || mkdir -p /mnt/auto/floppy
- [ -L /mnt/floppy ] || ln -s /mnt/auto/floppy /mnt/floppy
- [ -d /mnt/cdrom -a ! -L /mnt/cdrom ] && rmdir /mnt/cdrom
- [ -d /mnt/auto/cdrom ] || mkdir -p /mnt/auto/cdrom
- [ -L /mnt/cdrom ] || ln -s /mnt/auto/cdrom /mnt/cdrom
- rm -f /etc/fstab.new
-# Replace paths from bootfloppy
- sed 's|/mnt/cdrom|/mnt/auto/cdrom|g;s|/mnt/floppy|/mnt/auto/floppy|g' /etc/fstab > /etc/fstab.new
- mv -f /etc/fstab.new /etc/fstab
-# Start automounter now
- einfo "Starting automounter for ${AUTOMOUNTS}."
- /etc/init.d/autofs start >>$DEBUG ; eend $?
-fi
-}
-# }}}
-
# {{{ Collect partitions from /proc/partitions first for enabling DMA
check_partitions(){
partitions=""
$(awk 'BEGIN{old="__start"}{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print $0}}}' /proc/partitions)
EOT
}
-check_partitions 1>/dev/null 2>&1 # avoid output "check_partitions:3: read-only file system"
+check_partitions >/dev/null 2>&1 # avoid output "check_partitions:3: read-only file system"
# }}}
# {{{ Enable DMA for all IDE drives now if not disabled
checkbootparam 'anyswap' && export ANYSWAP='yes' || export ANYSWAP=""
fi
-if checkbootparam 'nofstab' || checkbootparam 'forensic' ; then
- ewarn "Skipping /etc/fstab creation as requested on boot commandline." ; eend 0
-else
- einfo "Scanning for harddisk partitions and creating /etc/fstab. (Disable this via boot option: nofstab)"
- iszsh && setopt nonomatch
- if [ -x /usr/sbin/rebuildfstab ] ; then
- config_userfstab || fstabuser=grml
- /usr/sbin/rebuildfstab -r -u $fstabuser -g $fstabuser ; eend $?
- else
- ewarn "Command rebuildfstab not found. Install package grml-rebuildfstab." ; eend 1
- fi
-fi # checkbootparam nofstab/forensic
-
# Scan for swap, config, homedir - but only in live-mode
if [ -z "$INSTALLED" ] ; then
[ -z "$NOSWAP" ] && einfo "Searching for swap partition(s) as requested."
}
# }}}
-# {{{ Fat-Client-Version: DHCP Broadcast for IP address
-config_dhcp(){
-if checkbootparam 'nodhcp'; then
- ewarn "Skipping DHCP broadcast/network detection as requested on boot commandline." ; eend 0
-else
- NETDEVICES="$(awk -F: '/eth.:|tr.:|wlan.:/{print $1}' /proc/net/dev 2>>$DEBUG)"
- rm -rf /etc/network/status ; mkdir -p /etc/network/status
- for DEVICE in `echo "$NETDEVICES"` ; do
- einfo "Network device ${WHITE}${DEVICE}${NORMAL} detected, DHCP broadcasting for IP. (Backgrounding)"
- trap 2 3 11
- ifconfig $DEVICE up >>$DEBUG 2>&1
- ( pump -i $DEVICE --script=/etc/grml/pump-script >>$DEBUG 2>&1 && echo finished_running_pump > /etc/network/status/$DEVICE ) &
- trap "" 2 3 11
- sleep 1
- eend 0
- done
- if [ -n "$INSTALLED" ] ; then
- ewarn 'If you want to disable automatic DHCP requests set CONFIG_DHCP=no in /etc/grml/autoconfig.'
- eend 0
- fi
-fi
-}
-# }}}
-
-# {{{ helper functions
-findfile(){
-FOUND=""
-# search all partitions for a file in the root directory
-for i in /mnt/[sh]d[a-z] /mnt/[sh]d[a-z][1-9] /mnt/[sh]d[a-z][1-9]?*; do
-# See if it's already mounted
- [ -f "$i/$1" ] && { echo "$i/$1"; return 0; }
- if [ -d "$i" ] && mount -r "$i" 2>>$DEBUG; then
- [ -f "$i/$1" ] && FOUND="$i/$1"
- umount -l "$i" 2>>$DEBUG
- [ -n "$FOUND" ] && { echo "$FOUND"; return 0; }
- fi
-done
-return 2
-}
-
-fstype(){
-case "$(file -s $1)" in
- *[Ff][Aa][Tt]*|*[Xx]86*) echo "vfat"; return 0;;
- *[Rr][Ee][Ii][Ss][Ee][Rr]*) echo "reiserfs"; return 0;;
- *[Xx][Ff][Ss]*) echo "xfs"; return 0;;
- *[Ee][Xx][Tt]3*) echo "ext3"; return 0;;
- *[Ee][Xx][Tt]2*) echo "ext2"; return 0;;
- *data*) echo "invalid"; return 0;;
- *) echo "auto"; return 0;;
-esac
-}
-
-# Try to mount this filesystem read-only, without or with encryption
-trymount(){
-# Check if already mounted
-case "$(cat /proc/mounts)" in *\ $2\ *) return 0;; esac
-# Apparently, mount-aes DOES autodetect AES loopback files.
-[ -b "$1" ] && { mount -t auto -o ro "$1" "$2" 2>>$DEBUG; RC="$?"; }
-# We need to mount crypto-loop files with initial rw support
-[ -f "$1" ] && { mount -t auto -o loop,rw "$1" "$2" 2>>$DEBUG; RC="$?"; }
-# Mount succeeded?
-[ "$RC" = "0" ] && return 0
-echo ""
-einfo "Filesystem not autodetected, trying to mount $1 with AES256 encryption."
-a="y"
-while [ "$a" != "n" -a "$a" != "N" ]; do
-# We need to mount crypto-loop files with initial rw support
- mount -t auto -o loop,rw,encryption=AES256 "$1" "$2" && return 0
- echo -n "${RED}Mount failed, retry? [Y/n] ${NORMAL}"
- # Problem with ioctl() from getpasswd()?
- # read a
- read a
-done
-return 1
-}
-# }}}
-
# {{{ CPU-detection
config_cpu(){
if checkbootparam 'nocpu'; then
ewarn "Skipping CPU detection as requested on boot commandline." ; eend 0
+ return 0
+fi
+
+if [[ $(grep -c processor /proc/cpuinfo) -gt 1 ]] ; then
+ einfo "Detecting CPU:"
+ CPU=$(awk -F: '/^processor/{printf " Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>>$DEBUG)
+ echo $CPU | sed 's/ \{1,\}/ /g'
+ eend 0
else
- # check module dependencies
- cpufreq_check() {
- if ! [ -e /lib/modules/${KERNEL}/kernel/arch/x86/kernel/cpu/cpufreq ] ; then
- if [ -e /lib64 ] ; then
- [ -e /lib/modules/${KERNEL}/kernel/arch/x86_64/kernel/cpufreq ] || return 1
+ einfo "Detecting CPU: `awk -F: '/^processor/{printf " Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>>$DEBUG` " ; eend 0
+fi
+
+# Virtual Box supports ACPI and laptop-detect would return with '0', so check for it:
+if [ -r /proc/acpi/battery/BAT0/info ] && grep -q 'OEM info:.*innotek' /proc/acpi/battery/BAT0/info ; then
+ einfo 'Virtual Box detected, skipping cpufreq setup.' ; eend 0
+ return 0
+fi
+
+if [ -x /etc/init.d/loadcpufreq ] ; then
+ einfo "Trying to set up cpu frequency scaling:"
+ eindent
+ SKIP_CPU_GOVERNOR=''
+ LOADCPUFREQ=$(mktemp)
+ /etc/init.d/loadcpufreq start >"$LOADCPUFREQ" 2>&1 ; RC=$?
+ if grep -q FATAL "$LOADCPUFREQ" ; then
+ eindent
+ SKIP_CPU_GOVERNOR=1
+ oldIFS="$IFS"
+ IFS="
+"
+ for line in $(grep FATAL "$LOADCPUFREQ" | sed 's/.*FATAL: //; s/ (.*)//') ; do
+ eerror "$line" ; eend $RC
+ done
+ IFS="$oldIFS"
+ eoutdent
+ elif grep -q done "$LOADCPUFREQ" ; then
+ MODULE=$(grep done "$LOADCPUFREQ" | sed 's/.*done (\(.*\))./\1/')
+ if [ -n "$MODULE" -a "$MODULE" != none ]; then
+ einfo "Loading cpufreq kernel module $MODULE" ; eend 0
else
- [ -e /lib/modules/${KERNEL}/kernel/arch/i386/kernel/cpu/cpufreq -o ! -e /lib/modules/${KERNEL}/kernel/drivers/cpufreq ] || return 1
+ ewarn "Could not find an appropriate kernel module for cpu frequency scaling." ; eend 1
fi
fi
- }
-
- if [[ `grep -c processor /proc/cpuinfo` -gt 1 ]] ; then
- einfo "Detecting CPU:"
- CPU=$(awk -F: '/^processor/{printf " Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>>$DEBUG)
- echo $CPU | sed 's/ \{1,\}/ /g'
- eend 0
- else
- einfo "Detecting CPU: `awk -F: '/^processor/{printf " Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>>$DEBUG` " ; eend 0
- fi
- # Disclaimer: sorry for the tons of if/then/else... but this makes sure we use:
- # * it only if we have the according kernel modules available
- # * cpufreq only on laptops (check via /usr/sbin/laptop-detect) and not inside Virtual Box
- # * current version of /etc/init.d/loadcpufreq from Debian (to stay in sync)
- # -> parse output of the initscript and output it according to our look'n'feel
- # * our own cpufreq-detect.sh if /etc/init.d/loadcpufreq isn't present
- if ! cpufreq_check ; then
- ewarn "Skipping cpufreq setup as module dependencies are not fulfilled." ; eend 1
- else
- if /usr/sbin/laptop-detect 1>/dev/null 2>&1 ; then
- # Virtual Box supports ACPI and laptop-detect returns with '0', so check for it:
- if [ -r /proc/acpi/battery/BAT0/info ] ; then
- if grep -q 'OEM info: innotek' /proc/acpi/battery/BAT0/info ; then
- einfo 'Virtual Box detected, skipping cpufreq setup.' ; eend 0
- return 0
- fi
- fi
- einfo "Detected Laptop - trying to use cpu frequency scaling:"
- eindent
- if [ -x /etc/init.d/loadcpufreq ] ; then
- SKIP_CPU_GOVERNOR=''
- LOADCPUFREQ=$(mktemp)
- /etc/init.d/loadcpufreq start >"$LOADCPUFREQ" 2>&1 ; RC=$?
- if grep -q FATAL "$LOADCPUFREQ" ; then
- eindent
- SKIP_CPU_GOVERNOR=1
- oldIFS="$IFS"
- IFS="
-"
- for line in $(grep FATAL "$LOADCPUFREQ" | sed 's/.*FATAL: //; s/ (.*)//') ; do
- eerror "$line" ; eend $RC
- done
- IFS="$oldIFS"
- eoutdent
- elif grep -q done "$LOADCPUFREQ" ; then
- MODULE=$(grep done "$LOADCPUFREQ" | sed 's/.*done (\(.*\))./\1/')
- if [ -n "$MODULE" -a "$MODULE" != none ]; then
- einfo "Loading cpufreq kernel module $MODULE" ; eend 0
- else
- ewarn "Could not find an appropriate kernel module for cpu frequency scaling." ; eend 1
- fi
- fi
- rm -f $LOADCPUFREQ
- elif [ -r /usr/bin/cpufreq-detect.sh ] ; then
- . /usr/bin/cpufreq-detect.sh
- if [ -n "$MODULE" -a "$MODULE" != none ]; then
- einfo "Loading modules ${MODULE}"
- modprobe "$MODULE" 1>>$DEBUG || modprobe "$MODULE_FALLBACK" 1>>$DEBUG
- RC=$?
- if [[ $RC == 0 ]]; then
- eend 0
- else
- SKIP_CPU_GOVERNOR=1
- eend $1
- fi
- else
- ewarn "Could not detect an appropriate CPU for use with cpu frequency scaling - skipping." && eend 1
- fi # $MODULE
- fi # loadcpufreq
-
- if [ -z "$SKIP_CPU_GOVERNOR" ] ; then
- einfo "Loading cpufreq_ondemand, setting ondemand governor"
- if modprobe cpufreq_ondemand ; RC=$? ; then
- for file in $(find /sys/devices/system/cpu/ -name scaling_governor 2>/dev/null) ; do
- echo ondemand > $file
- done
- fi
- eend $RC
- fi # cpu-governor
+ rm -f $LOADCPUFREQ
- eoutdent
+ if [ -z "$SKIP_CPU_GOVERNOR" ] ; then
+ einfo "Loading cpufreq_ondemand, setting ondemand governor"
+ RC=0
+ if modprobe cpufreq_ondemand ; RC=$? ; then
+ for file in $(find /sys/devices/system/cpu/ -name scaling_governor 2>/dev/null) ; do
+ echo ondemand > $file
+ done
+ fi
+ eend $RC
+ fi # cpu-governor
- fi # laptop-detect
- fi # cpufreq_check
-fi # checkbootparam nocpu
+ eoutdent
+fi
}
# }}}
fi
einfo 'Starting secure shell server in background.'
- /etc/init.d/rmnologin start 1>>$DEBUG 2>>$DEBUG
- /etc/init.d/ssh start 1>>$DEBUG 2>>$DEBUG &
+ /etc/init.d/rmnologin start >>$DEBUG 2>>$DEBUG
+ /etc/init.d/ssh start >>$DEBUG 2>>$DEBUG &
eend $?
eindent
}
# }}}
+# {{{ autostart of x11vnc
+config_vnc(){
+
+USER=grml # TODO: make it dynamically configurable
+if checkbootparam 'vnc' ; then
+ VNC_PASSWD=''
+ VNC_PASSWD="$(getbootparam 'vnc' 2>>$DEBUG)"
+ einfo "Bootoption vnc found, trying to set password for user $USER."
+ eindent
+ if [ -z "$VNC_PASSWD" ] ; then
+ if [ -x /usr/bin/apg ] ; then
+ VNC_PASSWD="$(apg -M NL -a 0 -m 8 -x 12 -n 1)"
+ elif [ -x /usr/bin/gpw ] ; then
+ VNC_PASSWD="$(gpw 1)"
+ elif [ -x /usr/bin/pwgen ] ; then
+ VNC_PASSWD="$(pwgen -1 8)"
+ elif [ -x /usr/bin/hexdump ] ; then
+ VNC_PASSWD="$(dd if=/dev/urandom bs=14 count=1 2>/dev/null | hexdump | awk '{print $3 $4}')"
+ elif [ -n "$RANDOM" ] ; then
+ VNC_PASSWD="${USER}${RANDOM}"
+ else
+ VNC_PASSWD=''
+ eerror "Empty passphrase and neither pwgen nor hexdump nor \$RANDOM found. Skipping."
+ eend 1
+ fi
+
+ if [ -n "$VNC_PASSWD" ] ; then
+ ewarn "No given password for vnc found. Using random password: $VNC_PASSWD" ; eend 0
+ fi
+ fi
+ eoutdent
+
+ # finally check if we have a password we can use:
+ if [ -n "$VNC_PASSWD" ] ; then
+
+ VNCDIR="/home/${USER}/.vnc"
+ [ -d "$VNCDIR" ] || mkdir "$VNCDIR"
+
+ if [ ! -x /usr/bin/x11vnc ] ; then
+ eerror "Error: x11vnc not found - can not set up vnc. Please make sure to install the x11vnc package."
+ eend 1
+ else
+ /usr/bin/x11vnc -storepasswd "$VNC_PASSWD" "$VNCDIR"/passwd ; eend $?
+ /bin/chown -R "$USER": "$VNCDIR"
+ fi
+ fi
+ if checkbootparam 'vnc_connect' ; then
+ VNC_CONNECT=''
+ VNC_CONNECT="$(getbootparam 'vnc_connect' 2>>$DEBUG)"
+ einfo "Bootoption vnc_connect found, will start vnc with connect to $VNC_CONNECT."
+ #store the options in a file
+ VNCDIR="/home/${USER}/.vnc"
+ [ -d "$VNCDIR" ] || mkdir "$VNCDIR"
+ echo " --connect $VNC_CONNECT " >> $VNCDIR/options
+ fi
+fi
+}
+# }}}
+
# {{{ set password for user grml
config_passwd(){
if checkbootparam 'passwd' >>$DEBUG 2>&1; then
}
# }}}
-# {{{ Check for persistent homedir option and eventually mount /home from there, or use a loopback file.
-config_homedir(){
-if checkbootparam 'home' ; then
- HOMEDIR="$(getbootparam 'home')"
- MYHOMEDEVICE=""
- MYHOMEMOUNTPOINT=""
- MYHOMEDIR=""
- if [ -n "$HOMEDIR" ]; then
- einfo "Bootoption home detected." && eend 0
- case "$HOMEDIR" in
- /dev/*)
- MYHOMEDEVICE="${HOMEDIR##/dev/}"
- MYHOMEDEVICE="/dev/${MYHOMEDEVICE%%/*}"
- MYHOMEMOUNTPOINT="/mnt/${MYHOMEDEVICE##/dev/}"
- MYHOMEDIR="/mnt/${HOMEDIR##/dev/}"
- ;;
- /mnt/*)
- MYHOMEDEVICE="${HOMEDIR##/mnt/}"
- MYHOMEDEVICE="/dev/${MYHOMEDEVICE%%/*}"
- MYHOMEMOUNTPOINT="/mnt/${MYHOMEDEVICE##/dev/}"
- MYHOMEDIR="$HOMEDIR"
- ;;
- [Aa][Uu][Tt][Oo]|[Ss][Cc][Aa][Nn]|[Ff][Ii][Nn][Dd])
- MYHOMEDIR="$(findfile grml.img)"
- MYHOMEDEVICE="${MYHOMEDIR##/mnt/}"
- MYHOMEDEVICE="/dev/${MYHOMEDEVICE%%/*}"
- MYHOMEMOUNTPOINT="/mnt/${MYHOMEDEVICE##/dev/}"
- ;;
- *)
- eerror "Invalid home= option '$HOMEDIR' specified (must start with /dev/ or /mnt/ or 'scan')." ; eend 1
- eerror "Option ignored." ; eend 1
- ;;
- esac
- fi # -n $HOMEDIR
-
- if [ -n "$MYHOMEDIR" ]; then
- if trymount "$MYHOMEDEVICE" "$MYHOMEMOUNTPOINT"; then
- [ -f "$MYHOMEMOUNTPOINT/grml.img" ] && MYHOMEDIR="$MYHOMEMOUNTPOINT/grml.img"
- while read device mountpoint fs relax; do
- case "$mountpoint" in *$MYHOMEMOUNTPOINT*)
- case "$fs" in
- *[Nn][Tt][Ff][Ss]*)
- umount "$MYHOMEMOUNTPOINT"; eerror "Error: will not mount NTFS filesystem on $MYHOMEDEVICE read/write!" ; eend 1
- break
- ;;
- *[Ff][Aa][Tt]*)
- # Note: This currently won't work with encrypted partitions
- umount "$MYHOMEMOUNTPOINT"; mount -t vfat -o rw,uid=grml,gid=grml,umask=002 "$MYHOMEDEVICE" "$MYHOMEMOUNTPOINT"
- if [ ! -f "$MYHOMEDIR" ]; then
- ewarn "WARNING: FAT32 is not a good filesystem option for /home/grml (missing socket/symlink support)."
- ewarn "WARNING: Better use an ext2 loopback file on this device, and boot with home=$MYHOMEDEVICE/grml.img."
- fi
- ;;
- esac
-
- if mount -o remount,rw "$MYHOMEMOUNTPOINT"; then
- einfo "Mounting ${WHITE}$MYHOMEDIR${NORMAL} as ${WHITE}/home/grml${NORMAL}."
- if [ -f "$MYHOMEDIR" ]; then
- # It's a loopback file, mount it over the /home/grml directory
- trymount "$MYHOMEDIR" /home/grml
- RC="$?"
- [ "$RC" = "0" ] && ERROR="$(mount -o remount,rw /home/grml 2>&1)"
- RC="$?"
- else
- # Do a --bind mount
- ERROR="$(mount --bind "$MYHOMEDIR" /home/grml 2>&1)"
- RC="$?"
- fi # -f $MYHOMEDIR
-
- [ "$RC" = "0" ] && eend 0 || ( eerror "${ERROR}" ; eend 1 )
-
- fi # mount -o remount,rw,...
- break
- ;;
- esac # case "$mountpoint" in *$MYHOMEMOUNTPOINT*)
- done <<EOT
- $(cat /proc/mounts)
-EOT
- fi # if trymount ...
- fi # -n $MYHOMEDIR
-fi # checkbootparam home
-}
-# }}}
-
# {{{ Sound
-
-config_mixer(){
-if ! [ -x /usr/bin/amixer ] ; then
- eerror "amixer binary not available. Can not set sound volumes therefore." ; eend 1
-else
-
- if ! [ -r /proc/asound/cards ] ; then
- ewarn "No soundcard present, skipping mixer settings therefore." ; eend 0
- return
- fi
-
- if checkbootparam 'vol' ; then
- VOL="$(getbootparam 'vol' 2>>$DEBUG)"
- if [ -z "$VOL" ] ; then
- eerror "Bootoption vol found but no volume level/parameter given. Using defaults." ; eend 1
- VOL='75' # default
- fi
- else
- VOL='75' # default
- fi
-
- if checkbootparam 'nosound' ; then
- einfo "Muting sound devices on request."
-
- fix_ibm_sound 0
- # mute the master, this should be sufficient
- ERROR=$(amixer -q set Master mute)
- RC=$?
-
- if [ -n "$ERROR" ] ; then
- eindent
- eerror "Problem muting sound devices: $ERROR"
- eoutdent
- fi
- eend $RC
- elif [ -z "$INSTALLED" ]; then
- einfo "Setting mixer volumes to level ${WHITE}${VOL}${NORMAL}."
-
- fix_ibm_sound ${VOL}
-
- # by default assume '0' as volume for microphone:
- if checkbootparam 'micvol' ; then
- MICVOL="$(getbootparam 'micvol' 2>>$DEBUG)"
- else
- MICVOL=0
- fi
-
- # finally set the volumes:
- RC=0
- for CONTROL in Master PCM ; do
- amixer -q set ${CONTROL} ${VOL}%
- if [ $? -ne 0 ] ; then RC=$? ; fi
- done
- # dont know how to set microphone volume for all soundcards with amixer,
- # so use aumix instead :/
- if [ ${MICVOL} -ne 0 -a -x /usr/bin/aumix ] ; then
- aumix -m $MICVOL &>/dev/null
- if [ $? -ne 0 ] ; then RC=$? ; fi
+config_mixer () {
+ if ! [ -x /usr/bin/amixer ] ; then
+ eerror "amixer binary not available. Can not set sound volumes therefore."
+ eend 1
+ else
+ if ! [ -r /proc/asound/cards ] ; then
+ ewarn "No soundcard present, skipping mixer settings therefore."
+ eend 0
+ return
fi
- eend $RC
- fi
+ for card in $(cat /proc/asound/cards| grep -e '^\s*[0-9]' | awk '{print $1}') ; do
+ einfo "Configuring soundcard \"$(awk -F\[ '/^ *'$card' \[/{ FS=" "; $0=$2; print $1}' < /proc/asound/cards)\""
+ eindent
-fi
-}
+ if checkbootparam 'vol' ; then
+ VOL="$(getbootparam 'vol' 2>>$DEBUG)"
+ if [ -z "$VOL" ] ; then
+ eerror "Bootoption vol found but no volume level/parameter given. Using defaults (75%)."
+ VOL='75'
+ eend 1
+ fi
+ else
+ VOL='75'
+ fi
-# on some IBM notebooks the front control has to be toggled
-fix_ibm_sound() {
- if [ -z $1 ] ; then
- return
- fi
+ if checkbootparam 'nosound' ; then
+ einfo "Muting sound devices on request."
+ ERROR=$(amixer -q set Master mute)
+ RC=$?
+ if [ -n "$ERROR" ] ; then
+ eindent
+ eerror "Problem muting sound devices: $ERROR"
+ eoutdent
+ fi
+ eend $RC
+ elif [ -z "$INSTALLED" ] ; then
+ einfo "Setting mixer volumes to level ${WHITE}${VOL}${NORMAL}."
- VOL=${1}
+ if checkbootparam 'micvol' ; then
+ MICVOL="$(getbootparam 'micvol' 2>>$DEBUG)"
+ else
+ MICVOL=0
+ fi
- if [ -x /usr/bin/amixer ] ; then
- if amixer -q get Front 1>/dev/null 2>>$DEBUG ; then
- amixer -q set Front unmute &>/dev/null
- amixer -q set Front ${VOL}% &>/dev/null
- fi
- fi
+ for CONTROL in Master PCM ; do
+ if amixer -q | grep -q "Simple mixer control '$CONTROL'" ; then
+ amixer -q set "${CONTROL}" "${VOL}"%
+ eend $?
+ fi
+ done
+
+ if [ ${MICVOL} -ne 0 ] ; then
+ einfo "Setting microphone to ${WHITE}${MICVOL}${NORMAL}."
+ amixer -q set "Mic" $MICVOL &> /dev/null
+ eend $?
+ fi
+ fi # checkbootparam 'nosound'
+ eoutdent
+ done
+ fi
}
# }}}
}
# }}}
-# {{{ keyboard add-ons
-config_setkeycodes(){
-if checkbootparam 'setkeycodes' ; then
- einfo "Setting keycodes as requested via bootparameter 'setkeycodes'."
- # MS MM keyboard add-on
- # fix
- setkeycodes e001 126 &>/dev/null
- setkeycodes e059 127 &>/dev/null
- # fn keys
- setkeycodes e03b 59 &>/dev/null
- setkeycodes e008 60 &>/dev/null
- setkeycodes e007 61 &>/dev/null
- setkeycodes e03e 62 &>/dev/null
- setkeycodes e03f 63 &>/dev/null
- setkeycodes e040 64 &>/dev/null
- setkeycodes e041 65 &>/dev/null
- setkeycodes e042 66 &>/dev/null
- setkeycodes e043 67 &>/dev/null
- setkeycodes e023 68 &>/dev/null
- setkeycodes e057 87 &>/dev/null
- setkeycodes e058 88 &>/dev/null
- # hp keycodes
- setkeycodes e00a 89 e008 90 &>/dev/null
- eend 0
-fi
-}
-# }}}
-
# {{{ wondershaper
config_wondershaper(){
if checkbootparam 'wondershaper' ; then
eerror "No syslog daemon found." ; eend 1
else
einfo "Starting $SYSLOGD in background."
- /etc/init.d/$SYSLOGD start 1>>$DEBUG &
+ /etc/init.d/$SYSLOGD start >>$DEBUG &
eend 0
fi
fi
eerror "No mouse found - not starting GPM." ; eend 1
else
einfo "Starting gpm in background."
- /etc/init.d/gpm start 1>>$DEBUG &
- # ( while [ ! -e /dev/psaux ]; do sleep 5; done; /etc/init.d/gpm start 1>>$DEBUG ) &
+ /etc/init.d/gpm start >>$DEBUG &
+ # ( while [ ! -e /dev/psaux ]; do sleep 5; done; /etc/init.d/gpm start >>$DEBUG ) &
eend 0
fi
fi
SERVICE="$(getbootparam 'services' 2>>$DEBUG)"
SERVICELIST=$(echo "$SERVICE" | sed 's/,/\\n/g')
SERVICENL=$(echo "$SERVICE" | sed 's/,/ /g')
- einfo "Starting service(s) ${SERVICENL} in background."
for service in $(echo -e $SERVICELIST) ; do
- /etc/init.d/${service} start 1>>$DEBUG &
+ # support running (custom) init scripts in non-blocking mode
+ # if they contain the keyword "DO_NO_RUN_IN_BACKGROUND".
+ if grep -q 'DO_NO_RUN_IN_BACKGROUND' "/etc/init.d/${service}" 2>>$DEBUG ; then
+ einfo "Starting service ${service}."
+ /etc/init.d/${service} start >>$DEBUG
+ else
+ einfo "Starting service ${service} in background."
+ /etc/init.d/${service} start >>$DEBUG &
+ fi
done
- [ "$?" == "0" ] ; eend $?
+ eend $?
fi
}
# }}}
if get_remote_file ${CONFIG} ${SCRIPTFILE} ; then
chmod +x ${SCRIPTFILE}
- einfo "Running ${WHITE}${SCRIPTFILE}${NORMAL}:" && ${SCRIPTFILE} ; eend $?
+ einfo "Running ${WHITE}${SCRIPTFILE}${NORMAL}:" && NETSCRIPT=${CONFIG} ${SCRIPTFILE} ; eend $?
fi
fi
}
# }}}
-# {{{ blindsound
-config_blindsound(){
- if checkbootparam 'blind' ; then
- beep
- flitewrapper "welcome to the gremel system"
- fi
-}
-# }}}
-
-# {{{ welcome sound
-config_welcome(){
- if checkbootparam 'welcome' ; then
- flitewrapper "welcome to the gremel system"
- fi
-}
-# }}}
-
# {{{ fix/workaround for unionfs
fix_unionfs(){
if [ -z "$INSTALLED" ]; then
}
# }}}
-# {{{ create all /mnt-directories
-create_mnt_dirs(){
- ewarn "create_mnt_dirs is deprecated as grml-rebuildfstab does all we need."
- ewarn "Please set CONFIG_CREATE_MNT_DIRS='no' in /etc/grml/autoconfig" ; eend 0
-}
-# }}}
-
# {{{ start X window system via grml-x
config_x_startup(){
# make sure we start X only if startx is used *before* a nostartx option
# so it's possible to disable automatic X startup using nostart
if checkbootparam 'startx' && ! echo "$CMDLINE" | grep -q 'startx.*nostartx' ; then
- if [ -x $(which X) ] ; then
+ if [ -x "$(which X)" ] ; then
if [ -z "$INSTALLED" ] ; then
WINDOWMANAGER="$(getbootparam 'startx' 2>>$DEBUG)"
if [ -z "$WINDOWMANAGER" ] ; then
else
einfo "Window manager ${WHITE}${WINDOWMANAGER}${NORMAL} found as bootoption." && eend 0
fi
- einfo "Changing to runlevel 5 for starting grml-x ${WINDOWMANAGER}. Just exit X windows system to get full featured consoles."
+ einfo "Setting up and invoking grml-x ${WINDOWMANAGER}. Just exit X windows system to get full featured consoles."
config_userfstab || fstabuser='grml'
cat>|/etc/init.d/xstartup<<EOF
#!/bin/sh
-# su - $fstabuser -c 'grml-x "$WINDOWMANAGER"'
-sudo -u $fstabuser -i /usr/bin/grml-x $WINDOWMANAGER 1>>$DEBUG
+su $fstabuser -c "/usr/bin/grml-x $WINDOWMANAGER"
EOF
chmod 755 /etc/init.d/xstartup
# adjust inittab for xstartup
if grep -q '^6:' /etc/inittab ; then
- sed -i 's|^6:.*|6:2345:respawn:/bin/zsh --login -c "/etc/init.d/xstartup ; /bin/zsh"|' /etc/inittab
+ sed -i 's|^6:.*|6:2345:respawn:/bin/zsh --login -c "/etc/init.d/xstartup ; /usr/share/grml-scripts/run-welcome" >/dev/tty6 2>\&1 </dev/tty6|' /etc/inittab
else # just append tty6 to inittab if no definition is present:
- echo '6:2345:respawn:/bin/zsh --login -c "/etc/init.d/xstartup ; /bin/zsh"' >> /etc/inittab
+ echo '6:2345:respawn:/bin/zsh --login -c "/etc/init.d/xstartup ; /usr/share/grml-scripts/run-welcome" >/dev/tty6 2>&1 < /dev/tty6' >> /etc/inittab
fi
/sbin/telinit q ; eend $?
# - If myconfig=foo is set on the command line, $dcs-dir is set to
# foo, even if a GRMLCFG partition is present.
DCSDIR=""
+DCSMP="/mnt/grml"
+# autoconfig, see issue673
+GRMLCFG="$(getbootparam 'autoconfig' 2>>$DEBUG)"
+[ -n "$GRMLCFG" ] || GRMLCFG="GRMLCFG"
if checkbootparam 'noautoconfig' || checkbootparam 'forensic' ; then
- ewarn "Skipping running automount of device(s) labeled GRMLCFG as requested." ; eend 0
+ ewarn "Skipping running automount of device(s) labeled $GRMLCFG as requested." ; eend 0
else
if [ -z "$INSTALLED" ] ; then
if checkbootparam 'myconfig' ; then
eerror "Error: No device for bootoption myconfig provided." ; eend 1
fi # [ -z "$DCSDEVICE" ]
elif checkvalue $CONFIG_MYCONFIG; then # checkbootparam myconfig
- einfo "Searching for device(s) labeled with GRMLCFG. (Disable this via boot option: noautoconfig)" ; eend 0
+ einfo "Searching for device(s) labeled with $GRMLCFG. (Disable this via boot option: noautoconfig)" ; eend 0
eindent
# We do need the following fix so floppy disk is available to blkid in any case :-/
if [ -r /dev/fd0 ] ; then
einfo "Floppy device detected. Trying to access floppy disk."
- if timeout 4 dd if=/dev/fd0 of=/dev/null bs=512 count=1 1>>$DEBUG 2>&1 ; then
- blkid /dev/fd0 1>>$DEBUG 2>&1
+ if timeout 4 dd if=/dev/fd0 of=/dev/null bs=512 count=1 >>$DEBUG 2>&1 ; then
+ blkid /dev/fd0 >>$DEBUG 2>&1
fi
fi
- DCSDEVICE=$(blkid -t LABEL=GRMLCFG | head -1 | awk -F: '{print $1}')
+ DCSDEVICE=$(blkid -t LABEL=$GRMLCFG | head -1 | awk -F: '{print $1}')
+ if [ -n "$DCSDEVICE" ]; then
+ DCSMP="/mnt/grmlcfg"
+ fi
eoutdent
fi
if [ -n "$DCSDIR" ]; then
ewarn "$DCSDEVICE already mounted on $DCSDIR"; eend 0
else
- [ -d /mnt/grml ] || mkdir /mnt/grml
- umount /mnt/grml 1>>$DEBUG 2>&1 # make sure it is not mounted
- mount -o ro -t auto $DCSDEVICE /mnt/grml ; RC="$?"
+ [ -d $DCSMP ] || mkdir $DCSMP
+ umount $DCSMP >>$DEBUG 2>&1 # make sure it is not mounted
+ mount -o ro -t auto $DCSDEVICE $DCSMP ; RC="$?"
if [[ $RC == 0 ]]; then
- einfo "Successfully mounted $DCSDEVICE to /mnt/grml (readonly)." ; eend 0
+ einfo "Successfully mounted $DCSDEVICE to $DCSMP (readonly)." ; eend 0
else
- eerror "Error: mounting $DCSDEVICE to /mnt/grml (readonly) failed." ; eend 1
+ eerror "Error: mounting $DCSDEVICE to $DCSMP (readonly) failed." ; eend 1
fi
- DCSDIR="/mnt/grml"
+ DCSDIR="$DCSMP"
fi
eoutdent
fi
# {{{ /cdrom/.*-options
config_debs(){
if checkbootparam 'debs' ; then
+ iszsh && setopt localoptions shwordsplit
DEBS="$(getbootparam 'debs' 2>>$DEBUG)"
+ if [ -z "$DEBS" ] ; then
+ DEBS="*.deb"
+ fi
if ! echo $DEBS | grep -q '/'; then
# backwards compatibility: if no path is given get debs from debs/
DEBS="debs/$DEBS"
}
config_scripts(){
-if checkbootparam 'scripts' ; then
+if checkbootparam 'scripts' || [ "$DCSMP" = "/mnt/grmlcfg" ]; then
SCRIPTS="$(getbootparam 'scripts' 2>>$DEBUG)"
- if [ -z "$SCRIPTS" ]; then
+ if [ -d ${DCSDIR}/scripts ] && [ -z "$SCRIPTS" ]; then
SCRIPTS="$(cd ${DCSDIR}/scripts; /bin/ls -1d [Gg][Rr][Mm][Ll].[Ss][Hh] 2>>$DEBUG)"
fi
if ! echo $SCRIPTS | grep -q '/'; then
# backwards compatibility: if no path is given get scripts from scripts/
SCRIPTS="scripts/$SCRIPTS"
fi
- SCRIPTS="${DCSDIR}/$SCRIPTS"
- if [ -d "$SCRIPTS" ]; then
- einfo "Bootparameter scripts found. Trying to execute from directory ${SCRIPTS}:"
- run-parts $SCRIPTS
- else
- einfo "Bootparameter scripts found. Trying to execute ${SCRIPTS}:"
- sh -c $SCRIPTS
+ if [ "$DCSMP" = "/mnt/grmlcfg" ]; then
+ # we are executing from a GRMLCFG labeled fs
+ # kick everything we have done before and start over
+ SCRIPTS="$(cd ${DCSDIR}; /bin/ls -1d [Gg][Rr][Mm][Ll].[Ss][Hh] 2>>$DEBUG)"
+ fi
+ if [ -n "$SCRIPTS" ]; then
+ SCRIPTS="${DCSDIR}/$SCRIPTS"
+ if [ "$DCSMP" = "/mnt/grmlcfg" ]; then
+ einfo "Trying to execute ${SCRIPTS}"
+ sh -c $SCRIPTS
+ elif [ -d "$SCRIPTS" ]; then
+ einfo "Bootparameter scripts found. Trying to execute from directory ${SCRIPTS}:"
+ run-parts $SCRIPTS
+ else
+ einfo "Bootparameter scripts found. Trying to execute ${SCRIPTS}:"
+ sh -c $SCRIPTS
+ fi
fi
fi
}
config_config(){
-if checkbootparam 'config' ; then
+if checkbootparam 'config' || [ "$DCSMP" = "/mnt/grmlcfg" ]; then
CONFIG="$(getbootparam 'config' 2>>$DEBUG)"
if [ -z "$CONFIG" ]; then
CONFIG="$(cd ${DCSDIR}; ls -1d [Cc][Oo][Nn][Ff][Ii][Gg].[Tt][Bb][Zz] 2>>$DEBUG)"
fi
fi
fi
-# umount /mnt/grml if it was mounted by finddcsdir
-# this doesn't really belong here
-grep -q '/mnt/grml' /proc/mounts && umount /mnt/grml
+}
+# }}}
+
+# {{{ confing_umount_dcsdir
+config_umount_dcsdir(){
+ # umount $DCSMP if it was mounted by finddcsdir
+ grep -q "$DCSMP" /proc/mounts && umount "$DCSMP"
}
# }}}
)
einfo "Starting distcc for network ${NET}, listening on ${IP}."
- /etc/init.d/distcc start 1>/dev/null ; eend $?
+ /etc/init.d/distcc start >/dev/null ; eend $?
eoutdent
else
eerror "No ip address for $INTERFACE found. distcc can not be used without it." ; eend 1
# {{{ SW-RAID
config_swraid(){
- if [ -z "$INSTALLED" ] ; then
+ [ -n "$INSTALLED" ] && return 0
+
# notice: checkbootparam "forensic" is just for users who don't know how to really use the bootoption
- if checkbootparam 'noraid' || checkbootparam 'noswraid' -o \
+ if checkbootparam 'noraid' || checkbootparam 'noswraid' || \
checkbootparam 'forensic' || checkbootparam 'raid=noautodetect' ; then
ewarn "Skipping SW-RAID code as requested on boot commandline." ; eend 0
else
fi # is /sbin/mdadm executable?
fi # check for bootoptions
- fi # run only in live-cd mode
+}
+# }}}
+
+# {{{ dmraid
+config_dmraid(){
+ [ -n "$INSTALLED" ] && return 0
+
+ if checkbootparam 'nodmraid' ; then
+ ewarn "Skipping dmraid code as requested on boot commandline." ; eend 0
+ return 0
+ fi
+
+ if ! [ -x /sbin/dmraid ] ; then
+ eerror "dmraid not available, can not execute it." ; eend 1
+ return
+ fi
+
+ dmraid_wrapper() {
+ # usage: dmraid_wrapper <dmraid_option>
+ [ -n "$1" ] || return 1
+
+ IFSOLD=${IFS:-}
+ IFS='
+'
+ eindent
+
+ for line in $(dmraid $1 ; echo errcode:$?); do
+ case $line in
+ *'no block devices found'*)
+ einfo "No block devices found" ; eend 0
+ break
+ ;;
+ *'no raid disks'*)
+ einfo "No active dmraid devices found" ; eend 0
+ break
+ ;;
+ errcode:0)
+ eend 0;
+ ;;
+ errcode:1)
+ eend 1
+ ;;
+ *)
+ einfo "$line"
+ ;;
+ esac
+ done
+
+ eoutdent
+ IFS=$IFSOLD
+ }
+
+ if checkbootparam 'dmraid' ; then
+ local ACTION="$(getbootparam 'dmraid' 2>>$DEBUG)"
+ if [ "$ACTION" = "off" ] ; then
+ # Deactivates all active software RAID sets:
+ einfo "Deactivating present dmraid sets (as requested via dmraid=off):"
+ dmraid_wrapper -an
+ else
+ # Activate all software RAID sets discovered:
+ einfo "Activating present dmraid sets (as requested via dmraid):"
+ dmraid_wrapper -ay
+ fi
+
+ return
+ fi
+
+ # by default (no special bootoptions) discover all software RAID devices:
+ einfo "Searching for any present dmraid sets:"
+ dmraid_wrapper -r
}
# }}}
# {{{ LVM (Logical Volumes)
config_lvm(){
- if [ -z "$INSTALLED" ] ; then
- # notice: checkbootparam "forensic" is just for users who don't know how to really use the bootoption
+ [ -n "$INSTALLED" ] && return 0
+
if checkbootparam 'nolvm' ; then
ewarn "Skipping LVM code as requested on boot commandline." ; eend 0
else
if ! [ -x /sbin/lvm -a -x /sbin/lvdisplay ] || ! [ -x /etc/init.d/lvm2 -o -x /etc/init.d/lvm ] ; then
eerror "LVM not available, can not execute it." ; eend 1
else
- if lvdisplay 2>&1 | grep -v 'No volume groups found' 1>/dev/null 2>&1 ; then
+ if lvdisplay 2>&1 | grep -v 'No volume groups found' >/dev/null 2>&1 ; then
einfo "You seem to have logical volumes (LVM) on your system."
eindent
einfo "Just run 'Start lvm2' to activate them or boot using 'lvm' as bootoption for autostart."
fi
fi # check for lvm binary
fi # check for bootoption nolvm
- fi # run only in live-cd mode
}
# }}}
# {{{ debnet: setup network based on an existing one found on a partition
config_debnet(){
if checkbootparam 'debnet' ; then
- iszsh && setopt shwordsplit
- DEVICES="$(< /proc/partitions tail -n +3 | awk '{print "/dev/"$4}' | tr "\n" " ")"
- DEVICES="$DEVICES $(ls /dev/mapper/*)"
- FOUND_DEBNET=""
-
einfo "Bootoption 'debnet' found. Searching for Debian network configuration: "
- eindent
- if ! mount | grep '/mnt ' 1>/dev/null 2>&1 ; then
- for i in $DEVICES; do
- if mount -o ro -t auto "$i" /mnt >/dev/null 2>&1; then
- einfo "Scanning on $i"
- if [ -f /mnt/etc/network/interfaces ]; then
- einfo "/etc/network/interfaces found on ${i}" ; eend 0
- FOUND_DEBNET="$i"
- break
- fi
- umount /mnt
- fi
- done
-
- if [ -n "$FOUND_DEBNET" ]; then
- einfo "Stopping network."
- pump -k 1>/dev/null 2>&1
- /etc/init.d/networking stop 1>/dev/null 2>&1 ; eend $?
- einfo "Copying Debian network configuration from $FOUND_DEBNET to running system."
- rm -rf /etc/network/run
- cp -a /mnt/etc/network /etc
- rm -rf /etc/network/run
- mkdir /etc/network/run
- umount /mnt ; eend $?
- einfo "Starting network."
- invoke-rc.d networking start ; eend $?
- else
- eerror "/etc/network/interfaces not found." ; eend 1
- fi
- eoutdent
- else
- eerror "Error: /mnt already mounted." ; eend 1
- fi
+ /usr/sbin/debnet
fi
}
# }}}
-# {{{ check for broken ipw3945 driver which causes problems (especially on hd install)
-config_ipw3945() {
- if grep -q ipw3945 /proc/modules ; then
- if ! iwconfig 2>/dev/null| grep -qe 'IEEE 802' -qe 'unassociated' ; then
- ewarn "Broken ipw3945 network interface found, reloading module."
- rmmod ipw3945
- modprobe ipw3945
- eend $?
- fi
- fi
-}
-# }}}
-
# {{{ disable console blanking
config_blanking(){
if checkbootparam 'noblank' ; then
# {{{ grml2hd: automatic installation
config_grml2hd(){
-if checkbootparam "BOOT_IMAGE=grml2hd" ; then
+if checkbootparam "grml2hd" || checkbootparam "BOOT_IMAGE=grml2hd" ; then
if checkbootparam 'user' ; then
NEWUSER=''
# {{{ debootstrap: automatic installation
config_debootstrap(){
-if checkbootparam "BOOT_IMAGE=debian2hd" ; then
+if checkbootparam "BOOT_IMAGE=debian2hd" || checkbootparam "debian2hd" ; then
einfo "Bootoption debian2hd found. Setting up environment for automatic installation via grml-debootstrap." ; eend 0
}
# }}}
+config_virtualbox_shared_folders() {
+if [ -r /proc/acpi/battery/BAT0/info ] && grep -q 'OEM info:.*innotek' /proc/acpi/battery/BAT0/info ; then
+ einfo "VirtualBox detected, trying to set up Shared Folders."
+ if ! modprobe -l | grep -q vboxsf.ko ; then
+ ewarn "vboxsf driver not present, not setting up VirtualBox Shared Folders."
+ eend 0
+ elif ! [ -x /usr/sbin/VBoxService ] ; then
+ ewarn "virtualbox-guest-utils not installed, not setting up VirtualBox Shared Folders."
+ eend 0
+ else
+ eindent
+
+ einfo "Loading vboxsf driver."
+ lsmod | grep -q vboxsf || modprobe vboxsf
+ eend $?
+
+ einfo "Adjusting /dev/vboxguest."
+ chown root:vboxsf /dev/vboxguest
+ chmod 660 /dev/vboxguest
+ eend $?
+
+ if [ -n "$CONFIG_FSTAB_USER" ] ; then
+ fstabuser="$CONFIG_FSTAB_USER"
+ else
+ fstabuser=$(getent passwd 1000 | cut -d: -f1)
+ fi
+ einfo "Adding $fstabuser to group vboxsf."
+ adduser grml vboxsf &>/dev/null
+ eend $?
+
+ einfo "Starting VBoxService."
+ VBoxService >/dev/null &
+ eend $?
+
+ eoutdent
+ fi
+fi
+}
+
# {{{ Support customization
config_distri(){
if checkbootparam 'distri'; then
}
# }}}
-### {{{ backwards compatible stuff
-config_environment(){
- ewarn "config_environment is deprecated. Please set CONFIG_ENVIRONMENT in /etc/grml/autoconfig to 'no'." ; eend 0
-}
-config_keyboard(){
- ewarn "config_keyboard is deprecated. Please set CONFIG_KEYBOARD in /etc/grml/autoconfig to 'no'." ; eend 0
-}
-# }}}
-
## END OF FILE #################################################################
# vim:foldmethod=marker expandtab ai ft=zsh shiftwidth=3
projects / grml-autoconfig.git / blobdiff