grep -q small /etc/grml_version 2>>$DEBUG && return 0 || return 1
}
-# execute flite only if it's present
-flitewrapper() {
- [ -x /usr/bin/flite ] && flite -o play -t "$*"
-}
### }}}
# {{{ filesystems (proc, pts, sys) and fixes
}
# }}}
-# {{{ hardware detection via hwinfo
-config_hwinfo(){
-if checkbootparam 'hwinfo' >>$DEBUG 2>&1; then
- einfo "Discovering hardware via hwinfo:"
- MODULES=$(su grml hwinfo | grep "Cmd: \"modprobe" | awk '{print $5}' | sed 's/"//')
- echo -n " Loading modules: "
- for i in `echo $MODULES` ; do echo -n $i && modprobe $i ; done
- eend 0
-fi
-}
-# }}}
-
# {{{ blacklist specific module [ used in /etc/init.d/udev ]
config_blacklist(){
if checkbootparam 'blacklist' ; then
else
ewarn "(none)" ; eend 1
fi
- if ! ps x | grep -q /usr/sbin/acpid ; then
+ if ! ps x 2>>$DEBUG | grep -q /usr/sbin/acpid ; then
if ! [ -r /var/run/dbus/pid ] ; then
einfo "Starting acpi daemon."
/etc/init.d/acpid start >>$DEBUG 2>&1 ; eend $?
}
# }}}
-# {{{ PCMCIA Check/Setup
-# This needs to be done before other modules are being loaded (by hwsetup)
-config_pcmcia(){
-if checkbootparam 'nopcmcia'; then
- ewarn "Skipping PCMCIA detection as requested on boot commandline." ; eend 0
-else
- if /usr/sbin/laptop-detect ; then
- einfo "Detected Laptop - checking for PCMCIA." && eend 0
- modprobe pcmcia_core >>$DEBUG 2>&1
- # Try Cardbus or normal PCMCIA socket drivers
- modprobe yenta_socket >>$DEBUG 2>&1 || modprobe i82365 >>$DEBUG 2>&1 || modprobe pd6729 >>$DEBUG 2>&1 || modprobe tcic >>$DEBUG 2>&1
- if [ "$?" = "0" ]; then
- modprobe ds >>$DEBUG 2>&1
- if [ -d /proc/bus/pccard ] ; then
- if [ -x /sbin/cardmgr ] ; then
- einfo "PCMCIA found, starting cardmgr."
- cardmgr >>$DEBUG 2>&1 && sleep 6 && eend 0
- else
- eerror "No cardmgr found. Make sure package pcmciautils is installed, it should handle it instead." ; eend 1
- fi
- fi
- fi
- fi
-fi
-}
-# }}}
-
-# {{{ run software synthesizer via speakup
-config_swspeak(){
- if checkbootparam 'swspeak' ; then
- einfo "Bootoption swspeak found."
-
- if [ ! -d /proc/speakup/ ] && ! grep -q speakup_soft /proc/modules ; then
- ewarn "Kernel does not support software speakup - trying to load kernel module:" ; eend 0
- eindent
- einfo "Loading speakup_soft"
- if modprobe speakup_soft ; then
- eend 0
- else
- flitewrapper "Fatal error setting up software speakup"
- eend 1
- return 1
- fi
- eoutdent
- fi
-
- if [ -d /proc/speakup/ ] || grep -q speakup_soft /proc/modules ; then
- einfo "Kernel supports speakup." ; eend 0
- eindent
- einfo "Just run swspeak if you want to use software synthesizer via speakup."
- flitewrapper "Finished activating software speakup. Just run swspeak when booting finished."
- eoutdent
- else
- eerror "Kernel does not seem to support speakup. Skipping swspeak." ; eend 1
- flitewrapper "Kernel does not seem to support speakup. Sorry."
- fi
- fi
-}
-# }}}
-
-# {{{ support hardware synthesizer via speakup
-config_hwspeak(){
- if checkbootparam 'speakup.synth' ; then
- einfo "Bootoption speakup.synth found."
- eindent
-
- module="$(getbootparam 'speakup.synth' 2>>$DEBUG)"
- if [ -z "$module" ] ; then
- eerror "Sorry, no speakup module specified for bootoption speakup.synth."
- flitewrapper "Sorry, no speakup module specified for bootoption speakup.synth."
- else
- einfo "Trying to load $module"
- modprobe "speakup_${module}"
- eend $?
- fi
-
- if [ -d /proc/speakup/ ] || grep -q speakup /proc/modules ; then
- einfo "Kernel should support speakup now." ; eend 0
- flitewrapper "Kernel should support speakup now."
- else
- eerror "Kernel or hardware do not seem to support speakup. Skipping hwspeak." ; eend 1
- flitewrapper "Kernel or hardware do not seem to support speakup. Sorry."
- fi
-
- eoutdent
-
- # hwspeak:
- elif checkbootparam 'hwspeak' ; then
- einfo "Bootoption hwspeak found."
-
- if [ ! -d /proc/speakup/ ] && ! grep -q speakup /proc/modules ; then
- ewarn "Kernel does not support hardware speakup - trying to load kernel modules:" ; eend 0
- eindent
- if ! [ -d "/lib/modules/${KERNEL}/extra/speakup/" ] ; then
- eerror "Kernel does not provide speakup modules, sorry." ; eend 1
- else
- for module in $(find "/lib/modules/${KERNEL}/extra/speakup/" -name \*.ko | \
- sed 's#.*speakup/##g ; s#.ko$##g' | \
- grep -ve speakup_soft -ve speakup_dummy | sort -u) ; do
- einfo "Trying to load $module"
- modprobe $module
- eend $?
- done
- fi
- eoutdent
- fi
-
- if [ -d /proc/speakup/ ] || grep -q speakup /proc/modules ; then
- einfo "Kernel should support speakup now." ; eend 0
- flitewrapper "Kernel should support speakup now."
- else
- eerror "Kernel or hardware do not seem to support speakup. Skipping hwspeak." ; eend 1
- flitewrapper "Kernel or hardware do not seem to support speakup. Sorry."
- fi
- fi
-}
-# }}}
-
-# {{{ Check for blind option or brltty
-config_blind(){
-BLIND=""
-checkbootparam 'blind' && BLIND="yes"
-BRLTTY="$(getbootparam 'brltty' 2>>$DEBUG)"
-
-if [ -n "$BLIND" -o -n "$BRLTTY" ]; then
- if [ -x /sbin/brltty ]; then
- # Blind option detected, start brltty now.
- # modprobe serial_core parport_serial generic_serial && echo "done"
- CMD=brltty
- BRLTYPE=""
- BRLDEV=""
- BRLTEXT=""
- if [ -n "$BRLTTY" ]; then
- # Extra options
- BRLTYPE="${BRLTTY%%,*}"
- R="${BRLTTY#*,}"
- if [ -n "$R" -a "$R" != "$BRLTTY" ]; then
- BRLTTY="$R"
- BRLDEV="${BRLTTY%%,*}"
- R="${BRLTTY#*,}"
- if [ -n "$R" -a "$R" != "$BRLTTY" ]; then
- BRLTTY="$R"
- BRLTEXT="${BRLTTY%%,*}"
- R="${BRLTTY#*,}"
- fi
- fi
- fi
- [ -n "$BRLTYPE" ] && CMD="$CMD -b $BRLTYPE"
- [ -n "$BRLDEV" ] && CMD="$CMD -d $BRLDEV"
- [ -n "$BRLTEXT" ] && CMD="$CMD -t $BRLTEXT"
- einfo "Starting braille-display manager."
-# ( exec $CMD & )
- ( sh -c "$CMD" & )
- sleep 2 && BLINDSOUND="yes"
- eend 0
- fi
-fi
-}
-# }}}
-
# {{{ AGP
config_agp(){
if checkbootparam 'forceagp' ; then
}
# }}}
-# {{{ automount(er)
-config_automounter(){
-if checkbootparam 'automounter' ; then
- RUNLEVEL="$(runlevel)"
- AUTOMOUNTER=""
- [ -x /etc/init.d/autofs ] && [ "$RUNLEVEL" != "N 1" ] && [ "$RUNLEVEL" != "N S" ] && AUTOMOUNTER="yes"
-
-addautomount(){
-# /dev/ice options
- d="${1##*/}"
- if [ -n "$AUTOMOUNTER" ]; then
- [ -d "/mnt/$d" -a ! -L "/mnt/$d" ] && rmdir /mnt/$d
- [ -d "/mnt/auto/$d" ] || mkdir -p "/mnt/auto/$d"
- [ -L "/mnt/$d" ] || ln -s "/mnt/auto/$d" "/mnt/$d"
- anew="$d -fstype=auto,$2 :$i"
- grep -q "$anew" "/etc/auto.mnt" || echo "$anew" >> /etc/auto.mnt
- AUTOMOUNTS="$AUTOMOUNTS $d"
- new="$1 /mnt/auto/$d auto users,noauto,exec,$2 0 0"
- else
- [ -d /mnt/$d ] && mkdir -p /mnt/$d
- new="$1 /mnt/$d auto users,noauto,exec,$2 0 0"
- fi
- grep -q "$new" "/etc/fstab" || echo "$new" >> /etc/fstab
-}
-
- AUTOMOUNTS="floppy cdrom"
-# Add new devices to /etc/fstab and /etc/auto.mnt
- for i in /dev/cdrom?*; do
- if [ -L $i ]; then
- addautomount "$i" "ro"
- fi
- done
-fi
-
-if [ -n "$AUTOMOUNTER" ]; then
-# Check for floppy dir, reinstall with automounter
- [ -d /mnt/floppy -a ! -L /mnt/floppy ] && rmdir /mnt/floppy
- [ -d /mnt/auto/floppy ] || mkdir -p /mnt/auto/floppy
- [ -L /mnt/floppy ] || ln -s /mnt/auto/floppy /mnt/floppy
- [ -d /mnt/cdrom -a ! -L /mnt/cdrom ] && rmdir /mnt/cdrom
- [ -d /mnt/auto/cdrom ] || mkdir -p /mnt/auto/cdrom
- [ -L /mnt/cdrom ] || ln -s /mnt/auto/cdrom /mnt/cdrom
- rm -f /etc/fstab.new
-# Replace paths from bootfloppy
- sed 's|/mnt/cdrom|/mnt/auto/cdrom|g;s|/mnt/floppy|/mnt/auto/floppy|g' /etc/fstab > /etc/fstab.new
- mv -f /etc/fstab.new /etc/fstab
-# Start automounter now
- einfo "Starting automounter for ${AUTOMOUNTS}."
- /etc/init.d/autofs start >>$DEBUG ; eend $?
-fi
-}
-# }}}
-
# {{{ Collect partitions from /proc/partitions first for enabling DMA
check_partitions(){
partitions=""
SERVICE="$(getbootparam 'services' 2>>$DEBUG)"
SERVICELIST=$(echo "$SERVICE" | sed 's/,/\\n/g')
SERVICENL=$(echo "$SERVICE" | sed 's/,/ /g')
- einfo "Starting service(s) ${SERVICENL} in background."
for service in $(echo -e $SERVICELIST) ; do
- /etc/init.d/${service} start >>$DEBUG &
+ # support running (custom) init scripts in non-blocking mode
+ # if they contain the keyword "DO_NO_RUN_IN_BACKGROUND".
+ if grep -q 'DO_NO_RUN_IN_BACKGROUND' "/etc/init.d/${service}" 2>>$DEBUG ; then
+ einfo "Starting service ${service}."
+ /etc/init.d/${service} start >>$DEBUG
+ else
+ einfo "Starting service ${service} in background."
+ /etc/init.d/${service} start >>$DEBUG &
+ fi
done
- [ "$?" == "0" ] ; eend $?
+ eend $?
fi
}
# }}}
}
# }}}
-# {{{ blindsound
-config_blindsound(){
- if checkbootparam 'blind' ; then
- beep
- flitewrapper "welcome to the gremel system"
- fi
-}
-# }}}
-
-# {{{ welcome sound
-config_welcome(){
- if checkbootparam 'welcome' ; then
- flitewrapper "welcome to the gremel system"
- fi
-}
-# }}}
-
# {{{ fix/workaround for unionfs
fix_unionfs(){
if [ -z "$INSTALLED" ]; then
}
# }}}
+config_virtualbox_shared_folders() {
+if [ -r /proc/acpi/battery/BAT0/info ] && grep -q 'OEM info:.*innotek' /proc/acpi/battery/BAT0/info ; then
+ einfo "VirtualBox detected, trying to set up Shared Folders."
+ if ! modprobe -l | grep -q vboxsf.ko ; then
+ ewarn "vboxsf driver not present, not setting up VirtualBox Shared Folders."
+ eend 0
+ elif ! [ -x /usr/sbin/VBoxService ] ; then
+ ewarn "virtualbox-guest-utils not installed, not setting up VirtualBox Shared Folders."
+ eend 0
+ else
+ eindent
+
+ einfo "Loading vboxsf driver."
+ lsmod | grep -q vboxsf || modprobe vboxsf
+ eend $?
+
+ einfo "Adjusting /dev/vboxguest."
+ chown root:vboxsf /dev/vboxguest
+ chmod 660 /dev/vboxguest
+ eend $?
+
+ if [ -n "$CONFIG_FSTAB_USER" ] ; then
+ fstabuser="$CONFIG_FSTAB_USER"
+ else
+ fstabuser=$(getent passwd 1000 | cut -d: -f1)
+ fi
+ einfo "Adding $fstabuser to group vboxsf."
+ adduser grml vboxsf &>/dev/null
+ eend $?
+
+ einfo "Starting VBoxService."
+ VBoxService >/dev/null &
+ eend $?
+
+ eoutdent
+ fi
+fi
+}
+
# {{{ Support customization
config_distri(){
if checkbootparam 'distri'; then
projects / grml-autoconfig.git / blobdiff