# Authors: grml-team (grml.org), (c) Klaus Knopper <knopper@knopper.net>, (c) Michael Prokop <mika@grml.org>
# Bug-Reports: see http://grml.org/bugs/
# License: This file is licensed under the GPL v2.
-# Latest change: Mon Nov 27 21:02:23 CET 2006 [mika]
+# Latest change: Son Mär 25 12:32:37 CEST 2007 [mika]
################################################################################
# {{{ path, variables, signals, umask, zsh
# set default to 'en' in live-cd mode if $LANGUAGE is not yet set:
if [ -z "$INSTALLED" ] ; then
- [ -n "$LANGUAGE" ] || LANGUAGE='en'
+ [ -n "$LANGUAGE" ] || LANGUAGE='en-utf8'
fi
# if bootoption lang is used update /etc/default/locale, otherwise *not*!
if [ -z "$CONSOLEFONT" ] ; then
if ! checkbootparam "nodefaultfont" >>$DEBUG 2>&1 ; then
# [ -n "$UTF8" ] && CONSOLEFONT='LatArCyrHeb-16' || CONSOLEFONT='Lat15-Terminus16'
- if [ -r /usr/share/consolefonts/Lat15-Terminus16.psf.gz ] ; then
- CONSOLEFONT='Lat15-Terminus16'
+ # if [ -r /usr/share/consolefonts/Lat15-Terminus16.psf.gz ] ; then
+ if [ -r /usr/share/consolefonts/Uni3-Terminus16.psf.gz ] ; then
+ CONSOLEFONT='Uni3-Terminus16'
else
- ewarn "/usr/share/consolefonts/Lat15-Terminus16.psf.gz not available. Please upgrade package console-terminus." ; eend 1
+ ewarn "/usr/share/consolefonts/Uni3-Terminus16.psf.gz not available. Please upgrade package console-terminus." ; eend 1
fi
fi
fi
[[ "$KKEYBOARD" == 'at' ]] && KEYTABLE=de-latin1-nodeadkeys
# write keyboard related variables to file for later use
+ [ -d /etc/sysconfig ] || mkdir /etc/sysconfig
echo "KEYTABLE=\"$KEYTABLE\"" > /etc/sysconfig/keyboard
echo "XKEYBOARD=\"$XKEYBOARD\"" >> /etc/sysconfig/keyboard
echo "KDEKEYBOARD=\"$KDEKEYBOARD\"" >> /etc/sysconfig/keyboard
einfo "Running consolechars using ${CONSOLEFONT}"
consolechars -f $CONSOLEFONT || consolechars -d
eend $?
-
- if [ -n "$UTF8" ] ; then
- einfo "Notice: run 'filterm - dynafont' in your shell to enable a unicode capable console."
- fi
fi
# we have to set up all consoles, therefore loop it over all ttys:
if [ -n "$CHARMAP" ] ; then
- einfo "Running consolechars for ${CHARMAP}"
- NUM_CONSOLES=`fgconsole --next-available`
- NUM_CONSOLES=`expr ${NUM_CONSOLES} - 1`
- [ ${NUM_CONSOLES} -eq 1 ] && NUM_CONSOLES=6
- for vc in `seq 0 ${NUM_CONSOLES}` ; do
- consolechars --tty=/dev/tty${vc} -m ${CHARMAP} ; RC=$?
- done
- eend ${RC}
+ einfo "Running consolechars for ${CHARMAP}"
+ NUM_CONSOLES=`fgconsole --next-available`
+ NUM_CONSOLES=`expr ${NUM_CONSOLES} - 1`
+ [ ${NUM_CONSOLES} -eq 1 ] && NUM_CONSOLES=6
+ for vc in `seq 0 ${NUM_CONSOLES}` ; do
+ consolechars --tty=/dev/tty${vc} -m ${CHARMAP} ; RC=$?
+ done
+ eend ${RC}
+ fi
+
+ # activate unicode console if running within utf8 environment
+ if [ -r /etc/default/locale ] ; then
+ if grep -q "LANG=.*UTF" /etc/default/locale ; then
+ einfo "Setting up unicode environment."
+ unicode_start
+ eend $?
+ fi
fi
eoutdent
config_time(){
# don't touch the files if running from harddisk:
if [ -z "$INSTALLED" ]; then
- UTC=""
- checkbootparam utc >>$DEBUG 2>&1 && UTC="-u"
- checkbootparam gmt >>$DEBUG 2>&1 && UTC="-u"
- # hwclock uses the TZ variable
- if [ -r /etc/default/locale ] ; then
- . /etc/default/locale
- else
- TZ=Europe/Vienna
- fi
- ERROR=$(TZ="$TZ" hwclock $UTC -s 2>&1) ; RC=$?
- if [ -n "$ERROR" ] ; then
- eindent
- ERROR=$(TZ="$TZ" hwclock $UTC -s --directisa 2>&1)
- if [ -n "$ERROR" ] ; then
- eerror "Problem running hwclock: $ERROR" ; eend 1
- fi
- eoutdent
- fi
+ UTC=""
+ checkbootparam utc >>$DEBUG 2>&1 && UTC="-u"
+ checkbootparam gmt >>$DEBUG 2>&1 && UTC="-u"
+ # hwclock uses the TZ variable
+ [ -r /etc/timezone ] && TZ=$(cat /etc/timezone)
+ [ -n "$TZ" ] || TZ=Europe/Vienna
+
+ if ! [ -r /dev/rtc ] ; then
+ ewarn "Realtime clock not available, skipping execution of hwclock therefore." ; eend 0
+ else
+ ERROR=$(TZ="$TZ" hwclock $UTC -s 2>&1 | head -1) ; RC=$?
+ if [ -n "$ERROR" ] ; then
+ eindent
+ ERROR=$(TZ="$TZ" hwclock $UTC -s --directisa 2>&1 | head -1)
+ if [ -n "$ERROR" ] ; then
+ eerror "Problem running hwclock: $ERROR" ; eend 1
+ fi
+ eoutdent
+ fi
+ fi
fi
}
# }}}
# {{{ print kernel info
config_kernel(){
vmware-detect &>/dev/null && VMWARE="inside ${WHITE}VMWare${NORMAL}"
+ [ -d /proc/xen ] && VMWARE='' # vmware-detect returns '0' when running with a Xen-enabled kernel
einfo "Running Linux Kernel $KERNEL $VMWARE" ; eend 0
+ if [ -r /proc/cpuinfo ] ; then
+ if egrep -q '^flags.*(vmx|svm)' /proc/cpuinfo ; then
+ eindent
+ einfo 'CPU(s) featuring virtualization technology detected' ; eend 0
+ eoutdent
+ fi
+ fi
+ if [ -d /proc/xen ] ; then
+ eindent
+ einfo 'Running kernel featuring support for Xen detected' ; eend 0
+ eoutdent
+ fi
}
# }}}
# {{{ vmware specific stuff
config_vmware(){
if checkbootparam novmware ; then
- ewarn "Skipping running vmware specific stuff as requested on boot commandline." ; eend 0
+ ewarn "Skipping running vmware specific stuff as requested on boot commandline." ; eend 0
else
- if [ -z "$INSTALLED" ]; then
- if vmware-detect ; then
- if [ -r /etc/X11/xorg.conf.vmware ] ; then
- einfo "Copying /etc/X11/xorg.conf.vmware to /etc/X11/xorg.conf"
- cp /etc/X11/xorg.conf.vmware /etc/X11/xorg.conf ; eend $?
- fi
- fi
- fi
+ if [ -z "$INSTALLED" ] ; then
+ if ! checkbootparam qemu ; then
+ if vmware-detect ; then
+ if [ -r /etc/X11/xorg.conf.vmware ] ; then
+ einfo "Copying /etc/X11/xorg.conf.vmware to /etc/X11/xorg.conf"
+ cp /etc/X11/xorg.conf.vmware /etc/X11/xorg.conf ; eend $?
+ fi
+ fi
+ fi
+ fi
+fi
+}
+# }}}
+
+# {{{ qemu specific stuff
+config_qemu(){
+if checkbootparam qemu ; then
+ if [ -r /etc/X11/xorg.conf.example ] ; then
+ einfo "Copying /etc/X11/xorg.conf.example to /etc/X11/xorg.conf"
+ cp /etc/X11/xorg.conf.example /etc/X11/xorg.conf ; eend $?
+ fi
fi
}
# }}}
# {{{ Bring up loopback interface now
config_local_net(){
if [ -z "$INSTALLED" ] ; then
- grep -q lo=lo /etc/network/run/ifstate 2>/dev/null || ifup lo
+ if grep -q 'iface lo inet loopback' /etc/network/interfaces 2>/dev/null ; then
+ grep -q lo=lo /etc/network/run/ifstate 2>/dev/null || ifup lo
+ else
+ ifconfig lo up
+ fi
fi
}
# }}}
*) continue ;;
# *) NONEFOUND='1'; continue ;;
esac
- mount -o "$MOUNTOPTS" -t $f $p $m 2>>$DEBUG || continue
- # Activate swapfile, if exists
- SWAPFILE="$(/bin/ls -1d $m/[Gg][Rr][Mm][Ll].[Ss][Ww][Pp] 2>/dev/null)"
+ if [ -z "$NOSWAP" ] ; then
+ mount -o "$MOUNTOPTS" -t $f $p $m 2>>$DEBUG || continue
+ # Activate swapfile, if exists
+ SWAPFILE="$(/bin/ls -1d $m/[Gg][Rr][Mm][Ll].[Ss][Ww][Pp] 2>/dev/null)"
+ fi
if [ -z "$NOSWAP" -a -n "$SWAPFILE" -a -f "$SWAPFILE" ]; then
mount -o remount,rw $m
if swapon "$SWAPFILE" 2>>$DEBUG ; then
# we probably need some time until stateless autoconfiguration has happened
sleep 2
NETDEVICES="$(awk -F: '/eth.:|tr.:|wlan.:/{print $1}' /proc/net/dev 2>>$DEBUG)"
- for DEVICE in `echo "$NETDEVICES"`
- do
- eindent
- einfo "$DEVICE:"
- ADDRESSES="$(ifconfig $DEVICE | awk '/.*inet6 addr:.*/{print $3}')"
- COUNT="$(ifconfig $DEVICE | awk '/.*inet6 addr:.*/{ sum += 1};END {print sum }')"
+ for DEVICE in `echo "$NETDEVICES"`; do
eindent
- for ADDR in `echo "$ADDRESSES"`
- do
- einfo "$ADDR"
- done
- if [ "$COUNT" -eq "0" ]
- then
- einfo "(none)" ; eend 1
- fi
- eoutdent
+ einfo "$DEVICE:"
+ ADDRESSES="$(ifconfig $DEVICE | awk '/.*inet6 addr:.*/{print $3}')"
+ COUNT="$(ifconfig $DEVICE | awk '/.*inet6 addr:.*/{ sum += 1};END {print sum }')"
+ eindent
+ for ADDR in `echo "$ADDRESSES"` ; do
+ einfo "$ADDR"
+ done
+ if [ "$COUNT" -eq "0" ] ; then
+ einfo "(none)" ; eend 1
+ fi
+ eoutdent
eoutdent
done
eend 0
# {{{ Check for persistent homedir option and eventually mount /home from there, or use a loopback file.
config_homedir(){
+if checkbootparam home ; then
HOMEDIR="$(getbootparam home)"
MYHOMEDEVICE=""
MYHOMEMOUNTPOINT=""
EOT
fi
fi
+fi # checkbootparam home
}
# }}}
sudo -u $fstabuser -i /usr/bin/grml-x $WINDOWMANAGER 1>>$DEBUG
EOF
chmod 755 /etc/init.d/xstartup
- sed -i 's/^allowed_users=.*/allowed_users=anybody/' /etc/X11/Xwrapper.config
- sed -i 's#^6.*#6:2345:respawn:/bin/zsh --login -c "/etc/init.d/xstartup ; /bin/zsh"#' /etc/inittab
+
+ sed -i 's#^6:.*#6:2345:respawn:/bin/zsh --login -c "/etc/init.d/xstartup ; /bin/zsh"#' /etc/inittab
+
/sbin/telinit q ; eend $?
+
+ if grep -q '^allowed_users=' /etc/X11/Xwrapper.config ; then
+ sed -i 's/^allowed_users=.*/allowed_users=anybody/' /etc/X11/Xwrapper.config
+ else
+ echo 'allowed_users=anybody' >> /etc/X11/Xwrapper.config
+ fi
+
else
eerror "We are not running from CD - startx will not work, skipping it.
Please use something like xdm, gdm or kdm for starting X on a harddisk system!" ; eend 1
ewarn "/etc/mdadm/mdadm.conf looks like a configured mdadm setup, will not touch it." ; eend 0
fi
- if ! checkbootparam 'swraid' ; then
+ if ! checkbootparam 'swraid' ; then
eindent
einfo "Just run 'Start mdadm-raid' to assemble md arrays or boot using 'swraid' as bootoption for autostart."
eoutdent
projects / grml-autoconfig.git / blobdiff