# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
# Bug-Reports: see http://grml.org/bugs/
# License: This file is licensed under the GPL v2.
-# Latest change: Wed Aug 27 02:41:00 CEST 2008 [mika]
################################################################################
# http://www.debian.org/releases/stable/i386/index.html.en
# welcome screen {{{
welcome_dialog()
{
- dialog --title "$PN" --msgbox "Welcome to the interactive configuration of grml-debootstrap." 0 0
- # TODO: improve message
+ dialog --title "$PN" --yesno "Welcome to the interactive configuration of ${PN}.
+Do you want to continue installing Debian using this frontend?" 0 0
}
# }}}
}
# }}}
+# ask for Debian release {{{
+prompt_for_release()
+{
+ RELEASE="$(dialog --stdout --title "${PN}" --default-item etch --menu \
+ "Please enter the Debian release you would like to use for installation:" \
+ 0 50 3 \
+ etch Debian/stable \
+ lenny Debian/testing \
+ sid Debian/unstable)"
+}
+# }}}
+
# ask for Debian mirror {{{
prompt_for_mirror()
{
[ $? -eq 0 ] || bailout 20
MD_LIST=$(for i in $(seq 0 9) ; do
- awk '{print $4}' /proc/partitions | grep md$i /proc/partitions || \
+ awk '{print $4}' /proc/partitions | grep -q md$i || \
echo "/dev/md$i /dev/md$i"
done)
grep -v 'Extended$' | \
gawk -v num=0 -v ORS=' ' '/^\/dev\// {print $1}')
[ -n "$AVAILABLE_PARTITIONS" ] || echo "FIXME: no partitions available?"
-PARTITION_LIST=$(for i in $(echo $AVAILABLE_PARTITIONS) ; do echo "$i $i off" ; done)
+PARTITION_LIST=$(for i in $(echo $AVAILABLE_PARTITIONS) ; do
+ echo "$i $(vol_id --type $i 2>/dev/null || echo [no_filesystem_yet]) off"
+ done)
dialog --title "$PN" \
--single-quoted \
--checklist "Please select the partitions you would like to use for your $RAIDLEVEL on ${TARGET}:" 0 0 0 \
$PARTITION_LIST 2>$TMPFILE
RETVAL=$?
-SELECTED_PARTITIONS=$(cat $TMPFILE)
+SELECTED_PARTITIONS="$(cat $TMPFILE)"
NUM_PARTITIONS=0
for i in $(cat $TMPFILE) ; do
- NUM_PARTITIONS=$(($NUM_PARTITIONS+1))
+ NUM_PARTITIONS=$((${NUM_PARTITIONS}+1))
done
-echo "
-Debug:
+ERRORFILE=$(mktemp)
+set +e
+# TODO: better error handling?
+yes | mdadm --create "${TARGET}" --level="${RAIDLEVEL}" \
+ --raid-devices="${NUM_PARTITIONS}" ${SELECTED_PARTITIONS} 1>/dev/null 2>$ERRORFILE
+RC=$?
+set -e
+
+if [ "$RC" = 0 ] ; then
+ dialog --title "$PN" --msgbox \
+ "Creating $TARGET was successful." 0 0
+ rm -f "$TMPFILE" "$ERRORFILE"
+else
+ dialog --title "$PN" --msgbox \
+ "There was an error setting up $TARGET:
+
+$(cat $ERRORFILE)
+
+Exiting." 0 0
+ rm -f "$TMPFILE" "$ERRORFILE"
+ exit 1
+fi
-mdadm --create --verbose $TARGET --level=$RAIDLEVEL
- --raid-devices=$NUM_PARTITIONS $SELECTED_PARTITIONS
-"
}
prompt_for_swraid()
if dialog --stdout --title "$PN" \
--defaultno --yesno "Do you want to configure Software RAID?
-Notice: currently only RAID levels 1 and 5 are
-supported by ${PN}. Configuration will be
-take place using mdadm." 0 0 ; then
+Please notice that currently only RAID levels 1 and 5 are supported by ${PN}. Configuration will take place using mdadm." 0 0 ; then
config_swraid_setup
fi
}
# }}}
+# make sure the user is aware of the used configuration {{{
+checkconfiguration()
+{
+if [ -n "$AUTOINSTALL" ] ; then
+ if checkforrun ; then
+ eerror "Exiting as requested" ; eend 0
+ exit 1
+ fi
+elif [ -n "$INTERACTIVE" ] ; then
+
+ INFOTEXT="Please recheck configuration before execution:
+ "
+ [ -n "$TARGET" ] && INFOTEXT="$INFOTEXT
+ Target: $TARGET"
+ [ -n "$GRUB" ] && INFOTEXT="$INFOTEXT
+ Install grub: $GRUB"
+ [ -n "$RELEASE" ] && INFOTEXT="$INFOTEXT
+ Using release: $RELEASE"
+ [ -n "$MIRROR" ] && INFOTEXT="$INFOTEXT
+ Using mirror: $MIRROR"
+
+ INFOTEXT="$INFOTEXT
+
+Is this ok for you? Notice: canceling will exit ${PN}."
+
+ dialog --title "$PN" \
+ --yesno "$INFOTEXT" 0 0
+
+else # if not running automatic installation display configuration and prompt for execution:
+ einfo "$PN - Please recheck configuration before execution:"
+ echo
+ echo " Target: $TARGET"
+ case "$MNTPOINT" in "$TARGET") ;; *) echo " Mount point: $MNTPOINT" ;; esac
+ [ -n "$GRUB" ] && echo " Install grub: $GRUB" || echo " Install grub: no"
+ [ -n "$RELEASE" ] && echo " Using release: $RELEASE"
+ [ -n "$MIRROR" ] && echo " Using mirror: $MIRROR"
+ [ -n "$ISO" ] && echo " Using iso: $ISO"
+ case "$MNTPOINT" in "$TARGET") ;; *) echo " Important! Continuing will delete all data from ${TARGET}!" ;; esac
+ echo
+ einfon "Is this ok for you? [y/N] "
+ read a
+ if ! [ "$a" = 'y' -o "$a" = 'Y' ] ; then
+ eerror "Exiting as requested." ; eend 1
+ exit 1
+ fi
+fi
+}
+# }}}
+
# interactive mode {{{
interactive_mode()
{
prompt_for_bootmanager
- [ -n "$BOOT_PARTITION" ] && GRUB="$(grubdevice $BOOT_PARTITION)"
- [ -n "$TARGET" ] && GROOT="$(grubdevice $TARGET)"
+ prompt_for_release
+
+ # FIXME: there seems to be a problem with grubdevice if it's /dev/md*
+ if echo "$TARGET" | grep -q '/dev/md' ; then
+ echo "debug: SELECTED_PARTITIONS = $SELECTED_PARTITIONS">&2
+ else
+ [ -n "$BOOT_PARTITION" ] && GRUB="$(grubdevice $BOOT_PARTITION)"
+ [ -n "$TARGET" ] && GROOT="$(grubdevice $TARGET)"
+ fi
prompt_for_mirror
+
+ checkconfiguration
}
# run interactive mode if we didn't get the according configuration yet
if [ -z "$TARGET" -o -n "$INTERACTIVE" ] ; then
+ # only target might be unset, so make sure the INTERACTIVE flag is set as well
+ INTERACTIVE=1
interactive_mode
fi
# }}}
# stages setup {{{
if [ -z "$STAGES" ] ; then
- STAGES="/etc/debootstrap/stages_${SHORT_TARGET}"
+ STAGES="/var/cache/grml-debootstrap/stages_${SHORT_TARGET}"
[ -d "$STAGES" ] || mkdir -p "$STAGES"
fi
[ -d "$MNTPOINT/$ISODIR" ] && umount "$MNTPOINT/$ISODIR" 1>/dev/null 2>&1
einfo "Unmounting $MNTPOINT" ; umount "$MNTPOINT" ; eend $?
+ if [ -n "$STAGES" ] ; then
+ echo -n "Removing stages directory ${STAGES}: "
+ rm -rf "$STAGES" && echo done
+ fi
+
# remove directory only if we used the default with process id inside the name
if echo "$MNTPOINT" | grep -q '/mnt/debootstrap\.' ; then
einfo "Removing directory ${MNTPOINT}" ; rmdir $MNTPOINT ; eend $?
dialog --timeout 10 --title "$PN" \
--yesno "Do you want to stop at this stage?
-Notice: you are running grml-debootstrap in non-interactive mode.
-grml-debootstrap will install Debian ${RELEASE} on ${TARGET}.
+Notice: you are running ${PN} in non-interactive mode.
+${PN} will install Debian ${RELEASE} on ${TARGET}.
Last chance to quit. Timeout of 10 seconds running....
Do you want to stop now?" 0 0 2>/dev/null
}
-if [ -n "$AUTOINSTALL" ] ; then
- if checkforrun ; then
- eerror "Exiting as requested" ; eend 0
- exit 1
- fi
-else # if not running automatic installation display configuration and prompt for execution:
- einfo "$PN - Please recheck configuration before execution:"
- echo
- echo " Target: $TARGET"
- case "$MNTPOINT" in "$TARGET") ;; *) echo " Mount point: $MNTPOINT" ;; esac
- [ -n "$GRUB" ] && echo " Install grub: $GRUB" || echo " Install grub: no"
- [ -n "$RELEASE" ] && echo " Using release: $RELEASE"
- [ -n "$MIRROR" ] && echo " Using mirror: $MIRROR"
- [ -n "$ISO" ] && echo " Using iso: $ISO"
- case "$MNTPOINT" in "$TARGET") ;; *) echo " Important! Continuing will delete all data from ${TARGET}!" ;; esac
- echo
- einfon "Is this ok for you? [y/N] "
- read a
- if ! [ "$a" = 'y' -o "$a" = 'Y' ] ; then
- eerror "Exiting as requested." ; eend 1
- exit 1
- fi
-fi
-# }}}
-
# create filesystem {{{
mkfs() {
if [ -n "$MKFS" ] ; then
# make sure we have our files for later use via chroot-script
cp /etc/debootstrap/config $MNTPOINT/etc/debootstrap/
+ # make sure we adjust the configuration variables accordingly:
+ sed -i "s/RELEASE=.*/RELEASE='${RELEASE}'/" $MNTPOINT/etc/debootstrap/config
+ sed -i "s/TARGET=.*/TARGET='${TARGET}'/" $MNTPOINT/etc/debootstrap/config
+ sed -i "s/GRUB=.*/GRUB='${GRUB}'/" $MNTPOINT/etc/debootstrap/config
+ sed -i "s/GROOT=.*/GROOT='${GROOT}'/" $MNTPOINT/etc/debootstrap/config
+
cp /etc/debootstrap/packages $MNTPOINT/etc/debootstrap/packages
cp $CHROOT_VARIABLES $MNTPOINT/etc/debootstrap/variables # do NOT use $CHROOT_VARIABLES inside chroot!
# make sure we can access network [relevant for cdebootstrap]
[ -f "$MNTPOINT/etc/resolv.conf" ] || cp /etc/resolv.conf $MNTPOINT/etc/resolv.conf
+ # provide system's /etc/hosts to the target:
+ if ! [ -f "$MNTPOINT/etc/hosts" ] ; then
+ cp /etc/hosts $MNTPOINT/etc/hosts
+ sed -i "s/127.0.0.1 .*/127.0.0.1 localhost $HOSTNAME/" /etc/hosts
+ fi
+
# setup default locales
[ -n "$LOCALES" ] && cp /etc/debootstrap/locale.gen $MNTPOINT/etc/locale.gen
grub_install() {
if [ -z "$GRUB" -o -z "$GROOT" ] ; then
echo "Notice: \$GRUB or \$GROOT not defined, will not install grub therefor."
+ elif [ -n "$SELECTED_PARTITIONS" ] ; then # using sw-raid
+ for device in $SELECTED_PARTITIONS ; do
+ GRUB=$(grubdevice $device)
+ einfo "Installing grub on ${GRUB}:"
+ [ -x /usr/sbin/grub-install ] && GRUBINSTALL=/usr/sbin/grub-install || GRUBINSTALL=/sbin/grub-install
+ $GRUBINSTALL --root-directory="$MNTPOINT" "(${GRUB})"
+ eend $?
+ done
else
einfo "Installing grub on ${GRUB}:"
[ -x /usr/sbin/grub-install ] && GRUBINSTALL=/usr/sbin/grub-install || GRUBINSTALL=/sbin/grub-install
for i in mkfs tunefs mount_target debootstrap_system preparechroot \
chrootscript grub_install umount_chroot fscktool ; do
if stage "${i}" ; then
- $i && stage "${i}" done || bailout 2 "i"
+ $i && ( stage "${i}" done && rm -f "${STAGES}/${i}" ) || bailout 2 "i"
fi
done
# }}}
# end dialog of autoinstallation {{{
if [ -n "$AUTOINSTALL" ] ; then
dialog --title "$PN" --msgbox \
- "Finished execution of ${0}.
-Enjoy your Debian system." 6 60
+ "Finished execution of ${PN}. Enjoy your Debian system." 0 0
else
- einfo "Finished execution of $PN - enjoy your Debian system." ; eend 0
+ einfo "Finished execution of ${PN}. Enjoy your Debian system." ; eend 0
fi
# }}}