# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
# Bug-Reports: see http://grml.org/bugs/
# License: This file is licensed under the GPL v2.
-# Latest change: Wed Aug 27 01:46:13 CEST 2008 [mika]
################################################################################
# http://www.debian.org/releases/stable/i386/index.html.en
done
# }}}
+# welcome screen {{{
+welcome_dialog()
+{
+ dialog --title "$PN" --yesno "Welcome to the interactive configuration of ${PN}.
+Do you want to continue installing Debian using this frontend?" 0 0
+}
+# }}}
+
# ask for target {{{
prompt_for_target()
{
case "$GETMBR" in
mbr)
- USE_MBR=1
# /dev/md0: has to be installed in MBR of /dev/md0 and not in /dev/md:
if echo $TARGET | grep -q "*md*" ; then
BOOT_PARTITION="${TARGET}"
BOOT_PARTITION="$TARGET"
;;
hda)
- USE_MBR=1
BOOT_PARTITION="/dev/hda"
;;
sda)
- USE_MBR=1
BOOT_PARTITION="/dev/sda"
;;
nowhere)
echo 'quit' | grub --device-map="$device_map" 1>/dev/null 2>&1
fi
- # taken from d-i's trunk/packages/arch/i386/grub-installer/grub-installer:
+ # based on code from d-i's trunk/packages/arch/i386/grub-installer/grub-installer:
tmp_disk=`echo "$device" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' \
-e 's%\(fd[0-9]*\)$%\1%' \
-e 's%/part[0-9]*$%/disc%' \
echo "$tmp_drive"
;;
*) # we expect something like 'hd0,0'
- # make sure we don't install into MBR if $USE_MBR is not set
- if [ -z "$USE_MBR" ] ; then
- echo "$tmp_drive" | sed "s%$%,`expr $tmp_part - 1`%"
- else
- echo "$tmp_drive" | sed "s%,[0-9]%%"
- fi
+ echo "$tmp_drive" | sed "s%$%,`expr $tmp_part - 1`%" # FIXME => md0
;;
esac
}
# }}}
+# software raid setup {{{
+config_swraid_setup()
+{
+TMPFILE=$(mktemp)
+RAIDLEVEL=$(dialog --stdout --title "$PN" --default-item raid1 \
+ --menu "Which RAID level do you want to use?" 0 0 0 \
+ raid1 "Software RAID level 1" \
+ raid5 "Software RAID level 5")
+[ $? -eq 0 ] || bailout 20
+
+MD_LIST=$(for i in $(seq 0 9) ; do
+ awk '{print $4}' /proc/partitions | grep -q md$i || \
+ echo "/dev/md$i /dev/md$i"
+ done)
+
+TARGET=$(dialog --stdout --title "$PN" --default-item /dev/md0 \
+--menu "Which device do you want to use for ${RAIDLEVEL}?
+
+Notice: activated devices will not be listed for security reasons. Anyway, please make sure the selected device is not in use already!" 0 0 0 \
+$MD_LIST)
+[ $? -eq 0 ] || bailout 20
+
+AVAILABLE_PARTITIONS=$(LANG=C fdisk -l 2>/dev/null | \
+ sed 's/*//' | \
+ grep -v 'Extended$' | \
+ gawk -v num=0 -v ORS=' ' '/^\/dev\// {print $1}')
+[ -n "$AVAILABLE_PARTITIONS" ] || echo "FIXME: no partitions available?"
+PARTITION_LIST=$(for i in $(echo $AVAILABLE_PARTITIONS) ; do
+ echo "$i $(vol_id --type $i 2>/dev/null || echo [no_filesystem_yet]) off"
+ done)
+
+dialog --title "$PN" \
+ --single-quoted \
+ --checklist "Please select the partitions you would like to use for your $RAIDLEVEL on ${TARGET}:" 0 0 0 \
+ $PARTITION_LIST 2>$TMPFILE
+RETVAL=$?
+SELECTED_PARTITIONS="$(cat $TMPFILE)"
+
+NUM_PARTITIONS=0
+for i in $(cat $TMPFILE) ; do
+ NUM_PARTITIONS=$((${NUM_PARTITIONS}+1))
+done
+
+ERRORFILE=$(mktemp)
+set +e
+# TODO: better error handling?
+yes | mdadm --create "${TARGET}" --level="${RAIDLEVEL}" \
+ --raid-devices="${NUM_PARTITIONS}" ${SELECTED_PARTITIONS} 1>/dev/null 2>$ERRORFILE
+RC=$?
+set -e
+
+if [ "$RC" = 0 ] ; then
+ dialog --title "$PN" --msgbox \
+ "Creating $TARGET was successful." 0 0
+ rm -f "$TMPFILE" "$ERRORFILE"
+else
+ dialog --title "$PN" --msgbox \
+ "There was an error setting up $TARGET:
+
+$(cat $ERRORFILE)
+
+Exiting." 0 0
+ rm -f "$TMPFILE" "$ERRORFILE"
+ exit 1
+fi
+
+}
+
+prompt_for_swraid()
+{
+if dialog --stdout --title "$PN" \
+ --defaultno --yesno "Do you want to configure Software RAID?
+
+Please notice that currently only RAID levels 1 and 5 are supported by ${PN}. Configuration will take place using mdadm." 0 0 ; then
+ config_swraid_setup
+fi
+}
+# }}}
+
# interactive mode {{{
interactive_mode()
{
- prompt_for_target
+ welcome_dialog
+
+ prompt_for_swraid
+
+ # do not prompt for partition dialog if swraid has been configured already
+ [ -n "$TARGET" ] || prompt_for_target
+
prompt_for_bootmanager
- prompt_for_mirror
+ # FIXME: there seems to be a problem with grubdevice if it's /dev/md*
[ -n "$BOOT_PARTITION" ] && GRUB="$(grubdevice $BOOT_PARTITION)"
[ -n "$TARGET" ] && GROOT="$(grubdevice $TARGET)"
- # FIXME
- echo "debug: BOOT_PARTITION=$BOOT_PARTITION"
- echo "debug: TARGET=$TARGET"
- echo "debug: MIRROR=$MIRROR"
- echo "debug: GROOT=$GROOT"
- echo "debug: GRUB=$GRUB"
-
- # TODO
- # ask for raid
- # ask for lvm
+ prompt_for_mirror
}
# run interactive mode if we didn't get the according configuration yet
dialog --timeout 10 --title "$PN" \
--yesno "Do you want to stop at this stage?
-Notice: you are running grml-debootstrap in non-interactive mode.
-grml-debootstrap will install Debian ${RELEASE} on ${TARGET}.
+Notice: you are running ${PN} in non-interactive mode.
+${PN} will install Debian ${RELEASE} on ${TARGET}.
Last chance to quit. Timeout of 10 seconds running....
Do you want to stop now?" 0 0 2>/dev/null
# end dialog of autoinstallation {{{
if [ -n "$AUTOINSTALL" ] ; then
dialog --title "$PN" --msgbox \
- "Finished execution of ${0}.
-Enjoy your Debian system." 6 60
+ "Finished execution of ${PN}. Enjoy your Debian system." 0 0
else
- einfo "Finished execution of $PN - enjoy your Debian system." ; eend 0
+ einfo "Finished execution of ${PN}. Enjoy your Debian system." ; eend 0
fi
# }}}
projects / grml-debootstrap.git / blobdiff