# variables {{{
PN="$(basename $0)"
-VERSION='0.18'
+VERSION='0.23'
MNTPOINT="/mnt/debootstrap.$$"
# inside the chroot system locales might not be available, so use minimum:
-c|--config <configfile> Use specified configuration file,
defaults to /etc/debootstrap/config
+ --hostname <hostname> Hostname of Debian system
-i|--iso <mnt> Mountpoint where a Debian ISO is mounted to,
for use instead of fetching packages from a mirror
-m|--mirror <URL> Mirror which should be used for apt-get/aptitude.
eend 0
exit 0
;;
+ --hostname)
+ shift
+ HOSTNAME=$1
+ ;;
--interactive)
INTERACTIVE=1
;;
grep -v 'Extended$' | \
gawk -v num=0 -v ORS=' ' '/^\/dev\// {print $1}')
- [ -n "$AVAILABLE_PARTITIONS" ] || echo "FIXME: no partitions available?"
+ if [ -z "$AVAILABLE_PARTITIONS" ] ; then
+ dialog --title "$PN" --trim \
+ --msgbox "Sorry, no partitions found. Please configure your
+ harddisks (see /proc/partitions) using a tool like fdisk,
+ cfdisk, gpart, gparted,..." 0 0
+ exit 0
+ fi
+
PARTITION_LIST=$(for i in $(echo $AVAILABLE_PARTITIONS) ; do
echo "$i $(vol_id --type $i 2>/dev/null || echo [no_filesystem_yet])"
done)
OIFS="$IFS"; IFS=:
- if echo $TARGET | grep -q "*md*" ; then
- MBRPART=$TARGET
+ if echo $TARGET | grep -q "/dev/md" ; then
+ MBRPART="all disks of Software RAID $TARGET"
else
- MBRPART="${TARGET%[0-9]}"
+ MBRPART="MBR of ${TARGET%[0-9]}"
fi
GETMBR=$(dialog --stdout --title "$PN" --default-item mbr \
--menu "Where do you want to install the bootmanager grub?" 0 0 0 \
- mbr "install bootmanager into MBR of $MBRPART" \
+ mbr "install bootmanager into $MBRPART" \
partition "install bootmanager into partition $TARGET" \
nowhere "do not install bootmanager at all" \
${ADDITIONAL_PARAMS})
}
# }}}
+# ask for hostname {{{
+prompt_for_hostname()
+{
+ HOSTNAME="$(dialog --stdout --title "${PN}" --inputbox \
+ "Please enter the hostname you would like to use for installation:" \
+ 0 0 grml)"
+}
+# }}}
+
+# ask for password {{{
+prompt_for_password()
+{
+ ROOTPW1='PW1'
+ ROOTPW2='PW2'
+ while [ "$ROOTPW1" != "$ROOTPW2" ]; do
+ ROOTPW1=$(dialog --insecure --stdout --title "${PN}" --passwordbox \
+ "Please enter the password for the root account:" 10 60)
+ ROOTPW2=$(dialog --insecure --stdout --title "${PN}" --passwordbox \
+ "Please enter the password for the root account again for \
+ confirmation:" 10 60)
+
+ if [ "$ROOTPW1" != "$ROOTPW2" ]; then
+ $(dialog --stdout --title "${PN}" --ok-label \
+ "Retry" --msgbox "Passwords do not match!" 10 60)
+ fi
+ done
+ ROOTPASSWORD="$ROOTPW1"
+}
+# }}}
+
# ask for Debian mirror {{{
prompt_for_mirror()
{
config_swraid_setup()
{
TMPFILE=$(mktemp)
-RAIDLEVEL=$(dialog --stdout --title "$PN" --default-item raid1 \
- --menu "Which RAID level do you want to use?" 0 0 0 \
- raid1 "Software RAID level 1" \
- raid5 "Software RAID level 5")
-[ $? -eq 0 ] || bailout 20
+
+# Currently we support only raid1:
+RAIDLEVEL='raid1'
+
+#RAIDLEVEL=$(dialog --stdout --title "$PN" --default-item raid1 \
+# --menu "Which RAID level do you want to use?" 0 0 0 \
+# raid1 "Software RAID level 1" \
+# raid5 "Software RAID level 5")
+#[ $? -eq 0 ] || bailout 20
MD_LIST=$(for i in $(seq 0 9) ; do
awk '{print $4}' /proc/partitions | grep -q md$i || \
echo "$i $(vol_id --type $i 2>/dev/null || echo [no_filesystem_yet]) off"
done)
-dialog --title "$PN" \
- --single-quoted \
+dialog --title "$PN" --separate-output \
--checklist "Please select the partitions you would like to use for your $RAIDLEVEL on ${TARGET}:" 0 0 0 \
$PARTITION_LIST 2>$TMPFILE
RETVAL=$?
if dialog --stdout --title "$PN" \
--defaultno --yesno "Do you want to configure Software RAID?
-Please notice that currently only RAID levels 1 and 5 are supported by ${PN}. Configuration will take place using mdadm." 0 0 ; then
+Please notice that only RAID level 1 is supported by ${PN} currently. Configuration will take place using mdadm." 0 0 ; then
config_swraid_setup
fi
}
Install grub: $GRUB"
[ -n "$RELEASE" ] && INFOTEXT="$INFOTEXT
Using release: $RELEASE"
+ [ -n "$HOSTNAME" ] && INFOTEXT="$INFOTEXT
+ Using hostname $HOSTNAME"
[ -n "$MIRROR" ] && INFOTEXT="$INFOTEXT
Using mirror: $MIRROR"
INFOTEXT="$INFOTEXT
-Is this ok for you? Notice: canceling will exit ${PN}."
+Is this ok for you? Notice: selecting 'No' will exit ${PN}."
dialog --title "$PN" --no-collapse \
--yesno "$INFOTEXT" 0 0
prompt_for_release
- # FIXME: there seems to be a problem with grubdevice if it's /dev/md*
+ prompt_for_hostname
+
+ prompt_for_password
+
+ # use first disk of sw-raid for grub by default, install grub on
+ # all involved disks later on
if echo "$TARGET" | grep -q '/dev/md' ; then
- echo "debug: SELECTED_PARTITIONS = $SELECTED_PARTITIONS">&2
+ if [ -n "$SELECTED_PARTITIONS" ] ; then # using sw-raid
+ # use hdX and not hdX,Y for $GRUB
+ TMPDEVICE=$(echo ${SELECTED_PARTITIONS} | awk '{print $1}') # use first disk only
+ GRUB="$(grubdevice ${TMPDEVICE%%[0-9]})" # like: hd0
+ GROOT="$(grubdevice ${TMPDEVICE})" # like: hd0,0
+ echo "debug: GRUB = $GRUB - GROOT = $GROOT" >/tmp/debug # FIXME
+ fi
else
[ -n "$BOOT_PARTITION" ] && GRUB="$(grubdevice $BOOT_PARTITION)"
[ -n "$TARGET" ] && GROOT="$(grubdevice $TARGET)"
ISODIR=${ISODIR%%/}
# }}}
-# provide variables to chroot system {{{
-CHROOT_VARIABLES="/var/cache/grml-debootstrap/variables_${SHORT_TARGET}"
-touch $CHROOT_VARIABLES
-chmod 600 $CHROOT_VARIABLES # make sure nobody except root can read it
-[ -n "$ARCH" ] && echo "ARCH=$ARCH" > $CHROOT_VARIABLES
-[ -n "$GRUB" ] && echo "GRUB=$GRUB" >> $CHROOT_VARIABLES
-[ -n "$GROOT" ] && echo "GROOT=$GROOT" >> $CHROOT_VARIABLES
-[ -n "$TARGET" ] && echo "TARGET=$TARGET" >> $CHROOT_VARIABLES
-[ -n "$ISO" ] && echo "ISO=$ISO" >> $CHROOT_VARIABLES
-[ -n "$ISODIR" ] && echo "ISODIR=$ISO" >> $CHROOT_VARIABLES
-[ -n "$MIRROR" ] && echo "MIRROR=$MIRROR" >> $CHROOT_VARIABLES
-[ -n "$MIRROR" ] && echo "CHROOTMIRROR=$MIRROR" >> $CHROOT_VARIABLES
-[ -n "$ROOTPASSWORD" ] && echo "ROOTPASSWORD=$ROOTPASSWORD" >> $CHROOT_VARIABLES
-# }}}
-
# helper functions {{{
# we want to exit smoothly and clean:
bailout(){
if [ -n "$MKFS" ] ; then
einfo "Running $MKFS on $TARGET"
$MKFS $TARGET
+ TARGET_UUID="$(vol_id -u $TARGET 2>/dev/null || echo '')"
eend $?
fi
}
if ! grep -q $MNTPOINT /proc/mounts ; then
mount_target
fi
- if grep -q $MNTPOINT /proc/mounts ; then
- einfo "Running $DEBOOTSTRAP for release ${RELEASE}${ARCHINFO} using ${MIRROR}${ISO}"
- [ -n "$MIRROR" ] && $DEBOOTSTRAP $ARCHCMD $RELEASE $MNTPOINT $MIRROR || \
- $DEBOOTSTRAP $ARCHCMD $RELEASE $MNTPOINT $ISO
+ if grep -q $MNTPOINT /proc/mounts || [ -n "$DIRECTORY" ] ; then
+ einfo "Running $DEBOOTSTRAP $DEBOOTSTRAP_OPT for release ${RELEASE}${ARCHINFO} using ${MIRROR}${ISO}"
+ [ -n "$MIRROR" ] && $DEBOOTSTRAP $ARCHCMD $DEBOOTSTRAP_OPT $RELEASE $MNTPOINT $MIRROR || \
+ $DEBOOTSTRAP $ARCHCMD $DEBOOTSTRAP_OPT $RELEASE $MNTPOINT $ISO
eend $?
else
eerror "Error: $MNTPOINT not mounted, can not continue."
# prepare chroot via chroot-script {{{
preparechroot() {
einfo "Preparing chroot system"
+
+ # provide variables to chroot system
+ CHROOT_VARIABLES="/var/cache/grml-debootstrap/variables_${SHORT_TARGET}"
+ touch $CHROOT_VARIABLES
+ chmod 600 $CHROOT_VARIABLES # make sure nobody except root can read it
+ echo "# Configuration of ${PN}" > $CHROOT_VARIABLES
+ [ -n "$ARCH" ] && echo "ARCH=$ARCH" >> $CHROOT_VARIABLES
+ [ -n "$GROOT" ] && echo "GROOT=$GROOT" >> $CHROOT_VARIABLES
+ [ -n "$GRUB" ] && echo "GRUB=$GRUB" >> $CHROOT_VARIABLES
+ [ -n "$HOSTNAME" ] && echo "HOSTNAME=$HOSTNAME" >> $CHROOT_VARIABLES
+ [ -n "$ISODIR" ] && echo "ISODIR=$ISO" >> $CHROOT_VARIABLES
+ [ -n "$ISO" ] && echo "ISO=$ISO" >> $CHROOT_VARIABLES
+ [ -n "$MIRROR" ] && echo "CHROOTMIRROR=$MIRROR" >> $CHROOT_VARIABLES
+ [ -n "$MIRROR" ] && echo "MIRROR=$MIRROR" >> $CHROOT_VARIABLES
+ [ -n "$KEEP_SRC_LIST" ] && echo "KEEP_SRC_LIST=$KEEP_SRC_LIST" >> $CHROOT_VARIABLES
+ [ -n "$ROOTPASSWORD" ] && echo "ROOTPASSWORD=$ROOTPASSWORD" >> $CHROOT_VARIABLES
+ [ -n "$TARGET" ] && echo "TARGET=$TARGET" >> $CHROOT_VARIABLES
+ [ -n "$TARGET_UUID" ] && echo "TARGET_UUID=$TARGET_UUID" >> $CHROOT_VARIABLES
+
cp $CONFFILES/chroot-script $MNTPOINT/bin/chroot-script
chmod 755 $MNTPOINT/bin/chroot-script
mkdir $MNTPOINT/etc/debootstrap/
# make sure we have our files for later use via chroot-script
cp /etc/debootstrap/config $MNTPOINT/etc/debootstrap/
# make sure we adjust the configuration variables accordingly:
- sed -i "s/RELEASE=.*/RELEASE=\"$RELEASE\"/" $MNTPOINT/etc/debootstrap/config
- sed -i "s/TARGET=.*/TARGET=\"$TARGET\"/" $MNTPOINT/etc/debootstrap/config
- sed -i "s/GRUB=.*/GRUB=\"$GRUB\"/" $MNTPOINT/etc/debootstrap/config
- sed -i "s/GROOT=.*/GROOT=\"$GROOT\"/" $MNTPOINT/etc/debootstrap/config
+ sed -i "s#RELEASE=.*#RELEASE=\"$RELEASE\"#" $MNTPOINT/etc/debootstrap/config
+ sed -i "s#TARGET=.*#TARGET=\"$TARGET\"#" $MNTPOINT/etc/debootstrap/config
+ sed -i "s#GRUB=.*#GRUB=\"$GRUB\"#" $MNTPOINT/etc/debootstrap/config
+ sed -i "s#GROOT=.*#GROOT=\"$GROOT\"#" $MNTPOINT/etc/debootstrap/config
cp /etc/debootstrap/packages $MNTPOINT/etc/debootstrap/packages
+ [ -f /etc/debootstrap/debconf-selections -a "$DEBCONF" = 'yes' ] && \
+ cp /etc/debootstrap/debconf-selections $MNTPOINT/etc/debootstrap/
# notice: do NOT use $CHROOT_VARIABLES inside chroot but statically file instead!
cp $CHROOT_VARIABLES $MNTPOINT/etc/debootstrap/variables
# provide system's /etc/hosts to the target:
if ! [ -f "$MNTPOINT/etc/hosts" ] ; then
cp /etc/hosts $MNTPOINT/etc/hosts
- sed -i "s/127.0.0.1 .*/127.0.0.1 localhost $HOSTNAME/" /etc/hosts
+ sed -i "s#127.0.0.1 .*#127.0.0.1 localhost $HOSTNAME#" /etc/hosts
fi
# setup default locales
# MAKEDEV is just a forking bomb crap, let's do it on our own instead :)
( cd $MNTPOINT/dev && tar zxf /etc/debootstrap/devices.tar.gz )
- # copy any existing existing files to chroot
- [ -d /etc/debootstrap/boot ] && cp -a /etc/debootstrap/boot/* $MNTPOINT/boot/
- [ -d /etc/debootstrap/etc ] && cp -a /etc/debootstrap/etc/* $MNTPOINT/etc/
- [ -d /etc/debootstrap/share ] && cp -a /etc/debootstrap/share/* $MNTPOINT/share/
- [ -d /etc/debootstrap/usr ] && cp -a /etc/debootstrap/usr/* $MNTPOINT/usr/
- [ -d /etc/debootstrap/var ] && cp -a /etc/debootstrap/var/* $MNTPOINT/var/
+ # copy any existing files to chroot
+ [ -d /etc/debootstrap/bin ] && cp -a -L /etc/debootstrap/bin/* $MNTPOINT/bin/
+ [ -d /etc/debootstrap/boot ] && cp -a -L /etc/debootstrap/boot/* $MNTPOINT/boot/
+ [ -d /etc/debootstrap/etc ] && cp -a -L /etc/debootstrap/etc/* $MNTPOINT/etc/
+ [ -d /etc/debootstrap/sbin ] && cp -a -L /etc/debootstrap/sbin/* $MNTPOINT/sbin/
+ [ -d /etc/debootstrap/share ] && cp -a -L /etc/debootstrap/share/* $MNTPOINT/share/
+ [ -d /etc/debootstrap/usr ] && cp -a -L /etc/debootstrap/usr/* $MNTPOINT/usr/
+ [ -d /etc/debootstrap/var ] && cp -a -L /etc/debootstrap/var/* $MNTPOINT/var/
# copy local network setup to chroot
if [ -r /etc/network/interfaces -a ! -r "${MNTPOINT}"/etc/network/interfaces ] ; then
echo "Notice: \$GRUB or \$GROOT not defined, will not install grub therefor."
elif [ -n "$SELECTED_PARTITIONS" ] ; then # using sw-raid
for device in $SELECTED_PARTITIONS ; do
- GRUB=$(grubdevice $device)
+ # TMPDEVICE=$(echo ${SELECTED_PARTITIONS} | awk '{print $1}')
+ # GRUB="$(grubdevice ${TMPDEVICE})"
+ # GRUB="$(grubdevice ${TMPDEVICE%%[0-9]})"
+ # GRUB=$(grubdevice $device)
+ GRUB="$(grubdevice ${device%%[0-9]})"
einfo "Installing grub on ${GRUB}:"
- [ -x /usr/sbin/grub-install ] && GRUBINSTALL=/usr/sbin/grub-install || GRUBINSTALL=/sbin/grub-install
+ [ -x /usr/sbin/grub-install ] && GRUBINSTALL="/usr/sbin/grub-install --no-floppy" || GRUBINSTALL="/sbin/grub-install --no-floppy"
$GRUBINSTALL --root-directory="$MNTPOINT" "(${GRUB})"
eend $?
done
else
einfo "Installing grub on ${GRUB}:"
- [ -x /usr/sbin/grub-install ] && GRUBINSTALL=/usr/sbin/grub-install || GRUBINSTALL=/sbin/grub-install
+ [ -x /usr/sbin/grub-install ] && GRUBINSTALL="/usr/sbin/grub-install --no-floppy" || GRUBINSTALL="/sbin/grub-install --no-floppy"
$GRUBINSTALL --root-directory="$MNTPOINT" "(${GRUB})"
eend $?
fi
projects / grml-debootstrap.git / blobdiff