1 grml2usb (0.9.10) UNRELEASED; urgency=low
3 * Support the directory where the grml2usb script resides as base
4 directory so /usr/share/grml2usb isn't necessarily needed.
5 Thanks for the patch to Alexander 'Leo' Bergolth <leo@strike.wu.ac.at>!
7 -- Michael Prokop <mika@grml.org> Mon, 31 Aug 2009 17:38:06 +0200
9 grml2usb (0.9.9) unstable; urgency=low
11 * Use ascii.pf2 as grub2 font, since grub2 (1.96+20090307-1)
12 the old ascii.pff isn't available anymore.
13 * Use terminal_output if available, otherwise fallback to old
14 older 'terminal'-command (thanks to Felix Zielcke for helping).
15 * Document the 'grub-setup fails after Attempting to install GRUB
16 to a partition instead of the MBR' issue.
17 * Use "set gfxpayload=1024x768x16,1024x768" instead of vga=791 in
18 grub2 configuration. This requires a recent version of the linux
19 loader as the new linux loader loads the kernel at 32bit entry point
20 and not at 16 bit anymore so it has to be translated for the Linux
21 kernel (as the kernel parses vga= in 16 bit code). In the long run
22 we don't seem to have another option, so let's change it.
23 Thanks to Felix Zielcke and Robert Millan for first hand information.
24 * Increase timeout from 5 to 10 seconds in grub2 configuration.
25 * Load memtest86+ binary via 'linux16' in grub2 (otherwise it fails).
26 * Drop the serial boot entry from grub2 (I assume users with usb
27 pens don't need that option).
28 * Change the way MirOS bsd4grml is loaded (use the fallback method
30 * Improve descriptions of grml's grub2 entries.
31 * Bump Standards-Version to 3.8.3 (no further changes).
32 * Fix creation and installation of grub1's configuration file (menu.lst).
33 Thanks to Mario 'BitKoenig' Holbe.
35 -- Michael Prokop <mika@grml.org> Tue, 25 Aug 2009 23:53:51 +0200
37 grml2usb (0.9.8) unstable; urgency=low
39 * Support installation on /dev/loop*-devices.
40 * Generate configuration for syslinux and grub by default, no
41 matter which bootloader the users chooses.
42 * Added options --skip-syslinux-config and --skip-grub-config
43 if someone wants to skip the generation of any bootloader
45 * Make sure grub-install is available before executing it.
46 * Display information about default grml flavour and the other
47 available grml flavours at the end of the grml2usb run.
48 * Use /sbin/blkid (e2fsprogs) instead of vol_id as vol_id is going to be
49 removed from udev. Thanks for the patch to Andras Korn!
50 * Use rsync instead of cp. Thanks for the patch to Andras Korn!
52 * Use 'forensic' and 'readonly' in the forensic bootoption itself.
53 * Spelling fixes (thanks to Thorsten Glaser <tg@mirbsd.org>).
54 * Write GRUB2 config even if the target is a directory (thanks, Thorsten)
55 * All these "set root=" are not needed for GRUB2 (thanks, Thorsten)
56 * Switch order of check whether the specified device is a directory
57 and check for usb device (as the usb device check will fail if
59 * Add grml2iso for creating a bootable DVD:
60 - thanks once more to Thorsten Glaser for helping and patches
61 - thanks to Ernesto Domato for reporting the issue regarding
62 i386<->amd64 with grub-mkimage
63 * Move syslinux check to install_syslinux_mbr()
64 * Drop the reference to --grub option (thanks for the bugreport
66 * Update documentation:
67 - mention the dd approach
69 - improve section link names for the online version
70 - add 'grub-probe: error: unknown filesystem'
71 * Support use with python version 2.4.
72 * Bump Standard Version to 3.8.2 (no further changes).
73 * Depend on debhelper >=5 (using compat version 5).
75 -- Michael Prokop <mika@grml.org> Tue, 21 Jul 2009 18:01:50 +0200
77 grml2usb (0.9.7) unstable; urgency=low
79 * Fix typo in manpage of grml2usb (thanks to Wernfried Haas).
80 * Fix bootoption toram: it should be toram=$FLAVOUR.squashfs instead
81 of toram=$FLAVOUR. Thanks to Wernfried Haas and Frank Prochnow
82 for the bugreport and debugging! [Closes: issue680]
84 -- Michael Prokop <mika@grml.org> Tue, 02 Jun 2009 23:32:13 +0200
86 grml2usb (0.9.6) unstable; urgency=low
88 * Support installation of the currently running grml live
89 system ("grml2usb /live/image /dev/sdx1").
90 * Add "persistent" entry to grub/syslinux menu. [Closes: issue669]
92 -- Michael Prokop <mika@grml.org> Wed, 20 May 2009 19:32:02 +0200
94 grml2usb (0.9.5) unstable; urgency=low
96 * Fix dashes of options in manpage (thanks for the bugreport,
98 * Display program version during execution.
99 * Apply fix by Peter Daum <gator@cs.tu-berlin.de>, making sure
100 to use the normalized path for unmounting. Thanks!
101 * Use 'multiboot' for booting MirOS BSD when using grub2.
102 * Catch exception if copying files fails.
103 * Make sure to exit if installing grub fails.
104 * Integrate hdt (Hardware Detection Tool) in bootsplash (but
105 only if using syslinux as grub isn't supported).
107 -- Michael Prokop <mika@grml.org> Mon, 04 May 2009 22:31:30 +0200
109 grml2usb (0.9.4) unstable; urgency=low
111 * Bugfix: move kernel commandline from initrd to kernel option in
112 generate_flavour_specific_grub2_config().
114 -- Michael Prokop <mika@grml.org> Thu, 09 Apr 2009 00:04:56 +0200
116 grml2usb (0.9.3) unstable; urgency=low
118 * Drop some leftover 'lang=us' references.
119 * Update mbr.S (thanks, Thorsten Glaser).
120 * Rename --mbr-manager into --mbr-menu (people seem to be confused
121 what this option does). Improve the according documentation.
122 * Update failsafe bootoption.
123 * Fix comments section in manpage (thanks for reporting,
124 Alexander Steinböck).
125 * Mention the Debian package in the error message (thanks to
126 Lothar Speil for the bugreport).
127 * Mention grml-repository in the docs.
128 * Support older kernel versions in check for removable usb device.
129 (Thanks to Ralf Gross for the report and relevant information.)
130 * Also add specified bootoptions to default entry in configuration
131 file of grub version 1. (Thanks to Ralf Gross for the bugreport.)
132 * Make sure that options "--quiet" and "--verbose" aren't accepted
133 at the same time in the command line. Thanks for bugreport and
134 code example, Karl Voit!
135 * Bump Standard Version to 3.8.1 (no further changes).
136 * Set debhelper's compat version from 4 to 5.
138 -- Michael Prokop <mika@grml.org> Wed, 08 Apr 2009 00:09:46 +0200
140 grml2usb (0.9.2) unstable; urgency=low
142 * Rewrote grml2usb from scratch (in python). New features:
143 - you no longer need to setup the device via /etc/fstab, just
144 directly invoke "grml2usb /path/to/iso /dev/sdb1"
145 - initial multi-iso / multi-boot support
146 [Closes: issue501] [Closes: issue584]
147 - provide *several* new options like --bootloader-only,
148 --bootoptions=... check out the manpage for all the details
149 - get rid of "polution" of root directory on usb-pen
151 - always write a default MBR (thanks a lot to the work
152 and help of Thorsten Glaser!) [Closes: issue295]
153 - use grub by default (but support for syslinux is present as
155 - fix regressions for temporary mountpoints / wrong directories
156 [Closes: issue603] [Closes: issue602]
157 * Update debian stuff:
158 - Bump Standard Version to 3.8.0 (no further changes)
159 - Change XS-Vcs-* to Vcs-* headers and replace mercurial with
160 grml's nowadays git repository URLs
161 - drop mtools from depends
162 - slightly improve long description
163 - add asciidoc, xsltproc and docbook-xsl to Build-Depends
164 - either depend on syslinux | grub2 | grub
166 -- Michael Prokop <mika@grml.org> Mon, 02 Mar 2009 16:40:55 +0100
168 grml2usb (0.9.1) unstable; urgency=low
170 * Fix problem with comment chars in /etc/fstab.
171 Thanks for debugging and the patch to Robert Euhus!
172 * Some minor cleanups in Debian packaging.
174 -- Michael Prokop <mika@grml.org> Sun, 25 May 2008 01:29:30 +0200
176 grml2usb (0.9.0) unstable; urgency=low
178 * Support new directory layout of different grml-flavours
179 * Fix uninstall option (really clean up usb device)
181 -- Michael Prokop <mika@grml.org> Sat, 23 Feb 2008 23:43:57 +0100
183 grml2usb (0.8.0) unstable; urgency=low
185 * Fix the "mv: cannot move `/mnt/usb-sdb1/boot/grub' to a subdirectory of
186 itself, `/mnt/usb-sdb1/grub'" issue.
188 -- Michael Prokop <mika@grml.org> Sat, 19 Jan 2008 16:57:08 +0100
190 grml2usb (0.7.8) unstable; urgency=low
192 * Adjust grml2usb for a present grub directory.
194 -- Michael Prokop <mika@grml.org> Fri, 16 Nov 2007 08:29:20 +0100
196 grml2usb (0.7.7) unstable; urgency=low
198 * Improve error handling for execution of syslinux.
200 -- Michael Prokop <mika@grml.org> Thu, 13 Sep 2007 01:38:31 +0200
202 grml2usb (0.7.6) unstable; urgency=low
204 * The "reworked grml2usb for JUXLALA"-release.
205 * Added fs check via vol_id.
206 * Improved error handling.
207 * Fixed some code parts regarding use of $TMPMNT.
209 -- Michael Prokop <mika@grml.org> Fri, 08 Jun 2007 18:07:09 +0200
211 grml2usb (0.7.5) unstable; urgency=low
213 * supporting directories and direct blockdevices as source for the iso.
215 -- Michael Gebetsroither <gebi@grml.org> Tue, 03 Apr 2007 23:28:19 +0200
217 grml2usb (0.7.4) unstable; urgency=low
219 * Get rid of bashism, thanks for reporting - Paul Weaver!
220 * Change version schema from x.y-z to x.y.z.
222 -- Michael Prokop <mika@grml.org> Fri, 16 Mar 2007 14:43:49 +0100
224 grml2usb (0.7-3) unstable; urgency=low
226 * The manpage was just a template, added the missing documentation
227 now. Thanks for reporting, Jens Heidrich!
229 -- Michael Prokop <mika@grml.org> Sat, 3 Feb 2007 11:08:30 +0100
231 grml2usb (0.7-2) unstable; urgency=low
233 * Use 'Architecture: all' in debian/control so we can use the
234 package on non-x86 as well.
235 * Bumb Standard Version to 3.7.2 (no further changes).
237 -- Michael Prokop <mika@grml.org> Sat, 11 Nov 2006 12:46:35 +0100
239 grml2usb (0.7-1) unstable; urgency=low
241 * Use different exit codes for different code parts, and quote
242 $ISO, thanks - Richard Hartmann!
243 * Remove unused configure lines in debian/rules.
245 -- Michael Prokop <mika@grml.org> Mon, 6 Nov 2006 23:48:46 +0100
247 grml2usb (0.6-1) unstable; urgency=low
249 * Allow overwriting of $TMPMNT.
251 -- Michael Prokop <mika@grml.org> Wed, 4 Oct 2006 22:50:58 +0200
253 grml2usb (0.5-1) unstable; urgency=low
255 * bailout if mounting of target device failes.
257 -- Michael Prokop <mika@grml.org> Mon, 11 Sep 2006 23:47:01 +0200
259 grml2usb (0.4-1) unstable; urgency=low
261 * Check for existence of syslinux before running the script.
262 * Updated copyright file (new fsfs address).
264 -- Michael Prokop <mika@grml.org> Sat, 3 Jun 2006 21:02:53 +0200
266 grml2usb (0.3-1) unstable; urgency=low
268 * Added uninstall option.
269 * Improved error handling and its output.
270 * Added colors to improve manual text parsing.
272 -- Michael Prokop <mika@grml.org> Fri, 10 Mar 2006 20:19:28 +0100
274 grml2usb (0.2-1) unstable; urgency=low
276 * Improved usage information.
278 -- Michael Prokop <mika@grml.org> Tue, 10 Jan 2006 09:35:20 +0100
280 grml2usb (0.1-3) unstable; urgency=low
282 * Changed 'cp -a' to 'cp -dR --preserve=mode,timestamps' so we don't
283 get the ownership-permission-warnings.
285 -- Michael Prokop <mika@grml.org> Fri, 2 Sep 2005 18:02:22 +0200
287 grml2usb (0.1-2) unstable; urgency=low
289 * Fixed small typo (SYSDEV/TMPDEV) [thanks for hint, tklauser!].
291 -- Michael Prokop <mika@grml.org> Wed, 17 Aug 2005 21:50:32 +0200
293 grml2usb (0.1-1) unstable; urgency=low
297 -- Michael Prokop <mika@grml.org> Sun, 14 Aug 2005 15:31:04 +0200