+grml2usb (0.9.24) unstable; urgency=low
+
+ [ Ulrich Dangel ]
+ * Add support for isos containing multiple grml flavours.
+ * Copy all {sys,iso}linux *.c32 files, like ifcpu64.c32.
+
+ [ Michael Prokop ]
+ * Use --force option for grub-install to support installation to PBR
+ again. Grub2 starting with version 1.98 supports installation to
+ PBR again iff using the --force option.
+ * Update documentation regarding grub and PBR vs. MBR.
+
+ -- Michael Prokop <mika@grml.org> Wed, 21 Apr 2010 13:54:51 +0200
+
+grml2usb (0.9.23) unstable; urgency=low
+
+ [ Ulrich Dangel ]
+ * Only ask questions if options.force is not set. [Closes: issue833]
+
+ -- Michael Prokop <mika@grml.org> Fri, 02 Apr 2010 18:32:25 +0200
+
+grml2usb (0.9.22) unstable; urgency=low
+
+ [ Ulrich Dangel ]
+ * Use GRML_{FLAVOURS,DEFAULT}, PROG_VERSION from global scope.
+ grml2usb was aborted when using --bootloader-only --skip-grub-config
+ as parameters. This fixes the behaviour and declares correctly the
+ correct scope for these variables. Thanks to Daniel Tiefnig for
+ reporting the bug.
+
+ [ Michael Prokop ]
+ * grml2usb-compat: drop duplicated boot=live bootoptions.
+ * Bump Standards-Version to 3.8.4 (no further changes).
+ * Add syslinux additionally to recommends so people should have
+ syslinux by available by default though don't explicitly require it.
+
+ -- Michael Prokop <mika@grml.org> Sun, 21 Feb 2010 16:52:23 +0100
+
+grml2usb (0.9.21) unstable; urgency=low
+
+ [ Michael Prokop ]
+ * Document the Boot error issue regarding USB-ZIP.
+
+ [ Ulrich Dangel ]
+ * Support bootid bootoption.
+
+ -- Michael Prokop <mika@grml.org> Thu, 04 Feb 2010 00:56:56 +0100
+
+grml2usb (0.9.20) unstable; urgency=low
+
+ * tarball.sh: do not use $UID but use $(id -u) instead so it proberly
+ works with dash and make sure to escape "$0". Thanks to Stefan Weiss!
+
+ -- Michael Prokop <mika@grml.org> Wed, 25 Nov 2009 00:47:36 +0100
+
+grml2usb (0.9.19) unstable; urgency=low
+
+ [ Ulrich Dangel ]
+ * check_for_fat always check for fat device.
+ * Unset option.syslinux if grub option is set.
+ * Mount vfat devices with explicit iocharset option.
+ [Closes: issue735]
+
+ -- Michael Prokop <mika@grml.org> Wed, 11 Nov 2009 18:34:56 +0100
+
+grml2usb (0.9.18) unstable; urgency=low
+
+ [ Ulrich Dangel ]
+ * Also set GRML_DEFAULT when running with --dry-run. Thanks to Moritz
+ Augsburger for the bug report.
+ * Make sure that --grub-mbr requires --grub. Thanks to Moritz
+ Augsburger and mika for the bug report.
+
+ -- Michael Prokop <mika@grml.org> Wed, 04 Nov 2009 20:51:24 +0100
+
+grml2usb (0.9.17) unstable; urgency=low
+
+ [ Michael Prokop ]
+ * Depend on rsync (thanks for the bugreport, Andras Korn).
+
+ [ Ulrich Dangel ]
+ * Adjust labels in {grml,default}.cfg if necessary.
+ * Always copy grub files.
+
+ -- Michael Prokop <mika@grml.org> Thu, 29 Oct 2009 01:06:12 +0100
+
+grml2usb (0.9.16) unstable; urgency=low
+
+ * Dynamic check for addons as grml-small is nowadays shipped with addons.
+ * Copy gpxe.lkrn from addons.
+ * Modified grml2usb to be able to run on a generated grml2usb iso/directory.
+
+ -- Ulrich Dangel <mru@grml.org> Tue, 27 Oct 2009 21:41:07 +0100
+
+grml2usb (0.9.15) unstable; urgency=low
+
+ * Support new addon menu file layout from grml-live.
+
+ -- Ulrich Dangel <mru@grml.org> Mon, 26 Oct 2009 12:32:27 +0100
+
+grml2usb (0.9.14) unstable; urgency=low
+
+ [ Ulrich Dangel ]
+ * Do not use '-' in the directory name for the linux kernel to allow
+ creating iso image from generated directory layout.
+ * Introduced --remove-bootoption in grml2usb to delete existing
+ default boot entries.
+ * Added -c option to grml2iso for copying the contents of specified
+ directory to the generated iso image.
+ * Added -b option to grml2iso for specifying additional default
+ boot entries.
+
+ [ Michael Prokop ]
+ * Sync and add grml2usb-compat to grml2usb package. This simplifies
+ installation as well as use for developers and users.
+ * Drop unnecessary header line from grml2usb script.
+
+ -- Michael Prokop <mika@grml.org> Sat, 24 Oct 2009 14:29:46 +0200
+
+grml2usb (0.9.13) unstable; urgency=low
+
+ [ Ulrich Dangel ]
+ * Modified syslinux configuration handling to generate new vesa
+ menu entries.
+ * Support adding additional isos to existing grml2usb installation.
+ * grml2iso supports new grml2usb using syslinux now.
+
+ [ Michael Prokop ]
+ * Update documentation regarding syslinux and FAT32 (thanks to
+ Stefan Traby <stefan@hello-penguin.com> for the hint).
+ * Changes with regards to Ulrich's work:
+ - Add a check to identify old ISOs which do not ship
+ a default.cfg file and abort then. We have to break
+ backward compatibility, otherwise the isolinux/syslinux
+ code would become worse than it's already nowadays.
+ - Search for isolinux files in /boot/isolinux/ so the
+ correct grml.png is used.
+ - Support setting bootoptions in syslinux.cfg
+ * Drop duplicated boot=live references in kernel cmdline.
+ * Apply patch from Thorsten Glaser which prepares code for
+ his future[tm] work.
+ * Raise CriticalException if filesystem.module, kernel or
+ initrd are not present.
+ * Avoid the "file is read only, overwrite anyway (y/n) ?"
+ question of mtools by syslinux.
+ * Inform user when using grub as bootloader.
+ * Make syslinux the default bootloader (drop --syslinux,
+ add --grub instead). Grub fails just too often.
+
+ -- Michael Prokop <mika@grml.org> Wed, 21 Oct 2009 22:25:57 +0200
+
+grml2usb (0.9.12) unstable; urgency=low
+
+ * Replace 'logging.*("%s" % foo)' with 'logging.*("%s", foo)'
+ so the logging works with python2.6 as well.
+
+ -- Michael Prokop <mika@grml.org> Thu, 10 Sep 2009 16:21:06 +0200
+
+grml2usb (0.9.11) unstable; urgency=low
+
+ * Improve handling the 'No space left on device' situation through
+ using an according rsync handler function.
+
+ -- Michael Prokop <mika@grml.org> Mon, 07 Sep 2009 23:05:30 +0200
+
+grml2usb (0.9.10) unstable; urgency=low
+
+ * Support the directory where the grml2usb script resides as base
+ directory so /usr/share/grml2usb isn't necessarily needed.
+ Thanks for the patch to Alexander 'Leo' Bergolth <leo@strike.wu.ac.at>!
+ * Make sure grub.conf isn't a symlink but a plain file instead,
+ otherwise it will break on FAT16 filesystems. This works around
+ grub-install of (at least) Fedora 10.
+ Thanks for the patch to Alexander 'Leo' Bergolth <leo@strike.wu.ac.at>!
+ * Use 'pci=nomsi' in failsafe bootoption. Thanks to Marc 'HE' Brockschmidt.
+ * Mention the --syslinux option if grub-install fails.
+ * Fix usage of --force in combination with --fat16. Thanks to
+ Johannes Endres and Reiko Kaps for the bugreport.
+ * Replace hint to '--grub' with 'grub'.
+ * New option --grub-mbr which allows installation of grub in MBR instead
+ of installation into a partition (PBR) which is necessary when using grub2.
+
+ -- Michael Prokop <mika@grml.org> Mon, 07 Sep 2009 17:12:54 +0200
+
+grml2usb (0.9.9) unstable; urgency=low
+
+ * Use ascii.pf2 as grub2 font, since grub2 (1.96+20090307-1)
+ the old ascii.pff isn't available anymore.
+ * Use terminal_output if available, otherwise fallback to old
+ older 'terminal'-command (thanks to Felix Zielcke for helping).
+ * Document the 'grub-setup fails after Attempting to install GRUB
+ to a partition instead of the MBR' issue.
+ * Use "set gfxpayload=1024x768x16,1024x768" instead of vga=791 in
+ grub2 configuration. This requires a recent version of the linux
+ loader as the new linux loader loads the kernel at 32bit entry point
+ and not at 16 bit anymore so it has to be translated for the Linux
+ kernel (as the kernel parses vga= in 16 bit code). In the long run
+ we don't seem to have another option, so let's change it.
+ Thanks to Felix Zielcke and Robert Millan for first hand information.
+ * Increase timeout from 5 to 10 seconds in grub2 configuration.
+ * Load memtest86+ binary via 'linux16' in grub2 (otherwise it fails).
+ * Drop the serial boot entry from grub2 (I assume users with usb
+ pens don't need that option).
+ * Change the way MirOS bsd4grml is loaded (use the fallback method
+ as default).
+ * Improve descriptions of grml's grub2 entries.
+ * Bump Standards-Version to 3.8.3 (no further changes).
+ * Fix creation and installation of grub1's configuration file (menu.lst).
+ Thanks to Mario 'BitKoenig' Holbe.
+
+ -- Michael Prokop <mika@grml.org> Tue, 25 Aug 2009 23:53:51 +0200
+
+grml2usb (0.9.8) unstable; urgency=low
+
+ * Support installation on /dev/loop*-devices.
+ * Generate configuration for syslinux and grub by default, no
+ matter which bootloader the users chooses.
+ * Added options --skip-syslinux-config and --skip-grub-config
+ if someone wants to skip the generation of any bootloader
+ configuration files.
+ * Make sure grub-install is available before executing it.
+ * Display information about default grml flavour and the other
+ available grml flavours at the end of the grml2usb run.
+ * Use /sbin/blkid (e2fsprogs) instead of vol_id as vol_id is going to be
+ removed from udev. Thanks for the patch to Andras Korn!
+ * Use rsync instead of cp. Thanks for the patch to Andras Korn!
+ [Closes: issue683]
+ * Use 'forensic' and 'readonly' in the forensic bootoption itself.
+ * Spelling fixes (thanks to Thorsten Glaser <tg@mirbsd.org>).
+ * Write GRUB2 config even if the target is a directory (thanks, Thorsten)
+ * All these "set root=" are not needed for GRUB2 (thanks, Thorsten)
+ * Switch order of check whether the specified device is a directory
+ and check for usb device (as the usb device check will fail if
+ it's a directory).
+ * Add grml2iso for creating a bootable DVD:
+ - thanks once more to Thorsten Glaser for helping and patches
+ - thanks to Ernesto Domato for reporting the issue regarding
+ i386<->amd64 with grub-mkimage
+ * Move syslinux check to install_syslinux_mbr()
+ * Drop the reference to --grub option (thanks for the bugreport
+ to Peter Palfrader)
+ * Update documentation:
+ - mention the dd approach
+ - mention grml2iso
+ - improve section link names for the online version
+ - add 'grub-probe: error: unknown filesystem'
+ * Support use with python version 2.4.
+ * Bump Standard Version to 3.8.2 (no further changes).
+ * Depend on debhelper >=5 (using compat version 5).
+
+ -- Michael Prokop <mika@grml.org> Tue, 21 Jul 2009 18:01:50 +0200
+
+grml2usb (0.9.7) unstable; urgency=low
+
+ * Fix typo in manpage of grml2usb (thanks to Wernfried Haas).
+ * Fix bootoption toram: it should be toram=$FLAVOUR.squashfs instead
+ of toram=$FLAVOUR. Thanks to Wernfried Haas and Frank Prochnow
+ for the bugreport and debugging! [Closes: issue680]
+
+ -- Michael Prokop <mika@grml.org> Tue, 02 Jun 2009 23:32:13 +0200
+
+grml2usb (0.9.6) unstable; urgency=low
+
+ * Support installation of the currently running grml live
+ system ("grml2usb /live/image /dev/sdx1").
+ * Add "persistent" entry to grub/syslinux menu. [Closes: issue669]
+
+ -- Michael Prokop <mika@grml.org> Wed, 20 May 2009 19:32:02 +0200
+
+grml2usb (0.9.5) unstable; urgency=low
+
+ * Fix dashes of options in manpage (thanks for the bugreport,
+ Thorsten Glaser).
+ * Display program version during execution.
+ * Apply fix by Peter Daum <gator@cs.tu-berlin.de>, making sure
+ to use the normalized path for unmounting. Thanks!
+ * Use 'multiboot' for booting MirOS BSD when using grub2.
+ * Catch exception if copying files fails.
+ * Make sure to exit if installing grub fails.
+ * Integrate hdt (Hardware Detection Tool) in bootsplash (but
+ only if using syslinux as grub isn't supported).
+
+ -- Michael Prokop <mika@grml.org> Mon, 04 May 2009 22:31:30 +0200
+
+grml2usb (0.9.4) unstable; urgency=low
+
+ * Bugfix: move kernel commandline from initrd to kernel option in
+ generate_flavour_specific_grub2_config().
+
+ -- Michael Prokop <mika@grml.org> Thu, 09 Apr 2009 00:04:56 +0200
+
+grml2usb (0.9.3) unstable; urgency=low
+
+ * Drop some leftover 'lang=us' references.
+ * Update mbr.S (thanks, Thorsten Glaser).
+ * Rename --mbr-manager into --mbr-menu (people seem to be confused
+ what this option does). Improve the according documentation.
+ * Update failsafe bootoption.
+ * Fix comments section in manpage (thanks for reporting,
+ Alexander Steinböck).
+ * Mention the Debian package in the error message (thanks to
+ Lothar Speil for the bugreport).
+ * Mention grml-repository in the docs.
+ * Support older kernel versions in check for removable usb device.
+ (Thanks to Ralf Gross for the report and relevant information.)
+ * Also add specified bootoptions to default entry in configuration
+ file of grub version 1. (Thanks to Ralf Gross for the bugreport.)
+ * Make sure that options "--quiet" and "--verbose" aren't accepted
+ at the same time in the command line. Thanks for bugreport and
+ code example, Karl Voit!
+ * Bump Standard Version to 3.8.1 (no further changes).
+ * Set debhelper's compat version from 4 to 5.
+
+ -- Michael Prokop <mika@grml.org> Wed, 08 Apr 2009 00:09:46 +0200
+
grml2usb (0.9.2) unstable; urgency=low
* Rewrote grml2usb from scratch (in python). New features:
grml's nowadays git repository URLs
- drop mtools from depends
- slightly improve long description
- - add build-essential to Build-Depends
+ - add asciidoc, xsltproc and docbook-xsl to Build-Depends
+ - either depend on syslinux | grub2 | grub
-- Michael Prokop <mika@grml.org> Mon, 02 Mar 2009 16:40:55 +0100
grml2usb (0.7.5) unstable; urgency=low
- * supporting directories and direct blockdevices as source for the iso.
+ * supporting directories and direct blockdevices as source for the iso.
-- Michael Gebetsroither <gebi@grml.org> Tue, 03 Apr 2007 23:28:19 +0200
projects / grml2usb.git / blobdiff