-live-initramfs (1.136.2-2~grml.01) unstable; urgency=low
+live-initramfs (1.136.3-2~grml.00) unstable; urgency=low
+ * Sync with Debian [1.136.3-1] once more (no new
+ changes except for my own patch which has been applied).
* Adjust path of rsync (use /bin).
* Drop duplicate NOFSTAB from /etc/live.conf.
+ * Get rid of all scripts in scripts/live-bottom/ except
+ for 05mountpoints which is necessary to get a working setup.
- -- Michael Prokop <mika@grml.org> Sun, 20 Jul 2008 16:54:49 +0200
+ -- Michael Prokop <mika@grml.org> Sun, 20 Jul 2008 19:18:27 +0200
live-initramfs (1.136.2-2~grml.00) unstable; urgency=low
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs script
-
-if grep -qs integrity-check /proc/cmdline
-then
- cd /live/image
- md5sum -c md5sum.txt < /dev/tty8 > /dev/tty8
- reboot
- while :; do sleep 60; done
-fi
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-. /scripts/live-functions
-
-log_begin_msg "Copying config on real root fs..."
-
-# live-initramfs script
-
-if [ -f /etc/live.conf ]
-then
- if [ ! -z "${LIVECONF}" ]
- then
- # Updating live.conf
- sed -i -e 's/\(USERNAME="\).*"/\1'"${USERNAME}"'"/g' \
- -e 's/\(USERFULLNAME="\).*"/\1'"${USERFULLNAME}"'"/g' \
- -e 's/\(HOSTNAME="\).*"/\1'"${HOSTNAME}"'"/g' \
- /etc/live.conf
- fi
-
- cp -p /etc/live.conf /root/etc/live.conf
-else
-
-cat > /root/etc/live.conf << EOF
-export USERNAME="${USERNAME}"
-export USERFULLNAME="${USERFULLNAME}"
-export HOSTNAME="${HOSTNAME}"
-EOF
-
-fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOTIMEZONE}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Setting timezone..."
-
-# live-initramfs script
-
-if [ -n "${TIMEZONE}" ]
-then
- area="$(echo ${TIMEZONE} | cut -f1 -d '/')"
- zone="$(echo ${TIMEZONE} | cut -f2 -d '/')"
-
-chroot /root debconf-communicate -fnoninteractive live-initramfs > /dev/null << EOF
-set tzdata/Areas ${area}
-set tzdata/Zones/${area} ${zone}
-EOF
-
- cp -f /root/usr/share/zoneinfo/${area}/${zone} /root/etc/localtime
-else
-
-chroot /root debconf-communicate -fnoninteractive live-initramfs > /dev/null << EOF
-set tzdata/Areas Etc
-set tzdata/Zones/Etc UTC
-EOF
-
- cp -f /root/usr/share/zoneinfo/UTC /root/etc/localtime
-fi
-
-if [ -n "${UTC}" ]
-then
- sed -i -e "s/UTC=.*/UTC=${UTC}/" /root/etc/default/rcS
-fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOUSER}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Adding live session user..."
-
-# live-initramfs script
-
-user_crypted="8Ab05sVQ4LLps" # as in $(echo "live" | mkpasswd -s)
-
-# U6aMy0wojraho is just a blank password
-chroot /root debconf-communicate -fnoninteractive live-initramfs > /dev/null << EOF
-set passwd/make-user true
-set passwd/root-password-crypted *
-set passwd/user-password-crypted ${user_crypted}
-set passwd/user-fullname ${USERFULLNAME}
-set passwd/username ${USERNAME}
-set passwd/user-uid 999
-EOF
-
-chroot /root /usr/bin/env -i HOME="/root" \
- TERM="${TERM}" PATH="/usr/sbin:/usr/bin:/sbin:/bin" \
- /usr/lib/user-setup/user-setup-apply > /dev/null
-
-# Clear out debconf database again to avoid confusing ubiquity later.
-chroot /root debconf-communicate -fnoninteractive live-initramfs > /dev/null << EOF
-set passwd/make-user
-set passwd/root-password-crypted
-set passwd/user-password-crypted
-set passwd/user-fullname
-set passwd/username
-set passwd/user-uid
-EOF
-
-if [ -z "${NOSUDO}" ]
-then
- if ! grep -q "${USERNAME}" /root/etc/sudoers
- then
- echo "${USERNAME} ALL=(ALL) NOPASSWD: ALL" >> /root/etc/sudoers
-
- chroot /root sudo -u "${USERNAME}" sh -c "echo 'SU_TO_ROOT_SU=sudo' >> /home/${USERNAME}/.su-to-rootrc"
- chroot /root sudo -u "${USERNAME}" gconftool-2 -s -t bool /apps/gksu/sudo-mode true
- chroot /root sudo -u "${USERNAME}" gconftool-2 -s -t bool /apps/gksu/display-no-pass-info false
-
-chroot /root sudo -u "${USERNAME}" sh -c "umask 0077 && mkdir -p /home/${USERNAME}/.kde/share/config && cat > /home/${USERNAME}/.kde/share/config/kdesurc" << EOF
-[super-user-command]
-super-user-command=sudo
-EOF
-
- if [ -f /root/usr/share/apps/konsole/sumc.desktop ]
- then
- chroot /root sudo -u "${USERNAME}" sh -c "umask 0077 && mkdir -p /home/${USERNAME}/.kde/share/apps/konsole && sed -e's/Exec=su.*$/Exec=sudo mc -c/' /usr/share/apps/konsole/sumc.desktop > /home/${USERNAME}/.kde/share/apps/konsole/sumc.desktop"
- fi
-
- if [ -f /root/usr/share/apps/konsole/su.desktop ]
- then
- chroot /root sudo -u "${USERNAME}" sh -c "umask 0077 && mkdir -p /home/${USERNAME}/.kde/share/apps/konsole && sed -e's/Exec=su.*$/Exec=sudo -i/' /usr/share/apps/konsole/su.desktop > /home/${USERNAME}/.kde/share/apps/konsole/su.desktop"
- fi
- fi
-fi
-
-if [ -L /root/home/${USERNAME}/Examples ]
-then
- chroot /root install -o ${USERNAME} -g ${USERNAME} -d /home/${USERNAME}/Desktop/
- mv /root/home/${USERNAME}/Examples /root/home/${USERNAME}/Desktop/
-fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-FSTAB=/root/etc/fstab
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-. /scripts/live-functions
-
-if [ -n "${NOFSTAB}" ]
-then
- exit 0
-fi
-
-log_begin_msg "Configuring fstab..."
-
-# live-initramfs script
-
-cat >> ${FSTAB} << EOF
-# /etc/fstab: static file system information.
-#
-# <file system> <mount point> <type> <options> <dump> <pass>
-
-${UNIONTYPE} / ${UNIONTYPE} rw 0 0
-tmpfs /tmp tmpfs nosuid,nodev 0 0
-EOF
-
-# disabled for now
-#rm -f /root/etc/rcS.d/S*checkroot.sh
-
-if [ "${NOFASTBOOT}" != "Yes" ]
-then
- touch root/fastboot
-fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOSWAP}" ] || [ -n "${NOFSTAB}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Setting up swap..."
-
-# live-initramfs script
-
-FSTAB=/root/etc/fstab
-devices=""
-
-for device in /dev/[hs]d[a-z][0-9]*
-do
- if ! [ -b "${device}" ]
- then
- continue
- fi
-
- /lib/udev/vol_id ${device%%[0-9]*} | grep -q "^ID_FS_USAGE=raid" && continue
-
- magic=$(/bin/dd if="${device}" bs=4086 skip=1 count=1 2>/dev/null | /bin/dd bs=10 count=1 2>/dev/null) || continue
-
- if [ "${magic}" = "SWAPSPACE2" -o "${magic}" = "SWAP-SPACE" ]
- then
- #log "Found ${device}"
- devices="${devices} ${device}"
- fi
-done
-
-for device in ${devices}
-do
-
-cat >> ${FSTAB} << EOF
-${device} swap swap defaults 0 0
-EOF
-
-done
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOLOCALES}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Setting up locales..."
-
-# live-initramfs script
-
-if [ -e /root/etc/default/locale ]
-then
- grep_file=/root/etc/default/locale
-elif [ -e /root/etc/environment ]
-then
- # Old locales policy
- grep_file=/root/etc/environment
-fi
-
-if [ -n "${grep_file}" ]
-then
- # use rootfs configured locale
- locale=$(grep -s 'LANG=' ${grep_file} | sed s/'LANG='// | tr -d '"' )
-fi
-
-if [ -n "${LOCALE}" ]
-then
- locale="${LOCALE}"
- set_locale="true"
-fi
-
-if [ -z "${locale}" ]
-then
- # Set a default one
- locale=en_US.UTF-8
- set_locale="true"
-fi
-
-if [ "${set_locale}" ]
-then
- if echo "${locale}" | grep -sqE '^[[:lower:]]{2}$'
- then
- # input is like "locale=it", so we will convert and setup also the keyboard if not already set
- if [ -z "${KBD}" ]
- then
- # FIXME: look if this keyb is supported
- KBD="${locale}"
- really_export KBD
- fi
-
- uploc=$(echo "${locale}" | tr '[a-z]' '[A-Z]')
- locale="${locale}_${uploc}.UTF-8"
- fi
-
- LANG=$(grep "^${locale}" /root/usr/share/i18n/SUPPORTED | grep UTF-8 | sed -e 's, .*,,' -e q)
-
- language="${LANG%%.UTF-8*}"
- if [ -d /root/etc/default/kdm.d/ ]
- then
-
-cat > /root/etc/default/kdm.d/live-autologin << EOF
-LANGUAGE=${language}
-EOF
-
- elif [ -f /root/etc/kde3/kdm/kdmrc ]
- then
- sed -i -r -e "s/#Language=.*/Language=${language}/" \
- /root/etc/kde3/kdm/kdmrc
- fi
-
- if [ -z "${LANG}" ]
- then
- log_warning_msg "Locale ${locale} is unsupported."
- locale="en_US.UTF-8"
- LANG="${locale}"
- fi
-
- really_export LANG
-
- printf 'LANG="%s"\n' "${LANG}" >> /root/etc/default/locale
- printf 'LANG="%s"\n' "${LANG}" >> /root/etc/environment
- printf '%s UTF-8\n' "${LANG}" > /root/etc/locale.gen
- chroot /root /usr/sbin/locale-gen
-fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-. /scripts/live-functions
-
-log_begin_msg "Setting up automatic login..."
-
-# live-initramfs script
-
-if [ -n "${NOXAUTOLOGIN}" ]
-then
- exit 0
-fi
-
-# chroot needed to handle symlinks correctly
-if chroot /root [ -f /etc/gdm/gdm-cdd.conf ]
-then
- GDMCONF=/etc/gdm/gdm-cdd.conf
-else
- GDMCONF=/etc/gdm/gdm.conf
-fi
-
-# chroot needed to handle symlinks correctly
-if chroot /root [ -f ${GDMCONF} ]
-then
- # true hack ! -- nohar
- chroot /root cp /usr/share/gdm/defaults.conf /etc/gdm/gdm.conf
-
- # Configure GDM autologin
- chroot /root \
- sed -i -e "s/^AutomaticLoginEnable=.*\$/AutomaticLoginEnable=true/" \
- -e "s/^AutomaticLogin=.*\$/AutomaticLogin=${USERNAME}/" \
- -e "s/^TimedLoginEnable=.*\$/TimedLoginEnable=true/" \
- -e "s/^TimedLogin=.*\$/TimedLogin=${USERNAME}/" \
- -e "s/^TimedLoginDelay=.*\$/TimedLoginDelay=10/" \
- ${GDMCONF}
-fi
-
-if [ -d /root/etc/default/kdm.d/ ]
-then
-
-cat >> /root/etc/default/kdm.d/live-autologin << EOF
-AUTOLOGINUSER=${USERNAME}
-AUTOLOGINAGAIN=true
-AUTOLOGINDELAY=0
-EOF
-
-elif [ -f /root/etc/kde3/kdm/kdmrc ]
-then
- # Configure KDM autologin
- sed -i -r -e "s/^#?AutoLoginEnable=.*\$/AutoLoginEnable=true/" \
- -e "s/^#?AutoLoginUser=.*\$/AutoLoginUser=${USERNAME}/" \
- -e "s/^#?AutoReLogin=.*\$/AutoReLogin=true/" \
- /root/etc/kde3/kdm/kdmrc
-elif [ -f /root/usr/lib/kde4/etc/kde4/kdm/kdmrc ]
-then
- # Configure KDM-KDE4 autologin
- sed -i -r -e "s/^#?AutoLoginEnable=.*\$/AutoLoginEnable=true/" \
- -e "s/^#?AutoLoginUser=.*\$/AutoLoginUser=$USERNAME/" \
- -e "s/^#?AutoReLogin=.*\$/AutoReLogin=true/" \
- /root/usr/lib/kde4/etc/kde4/kdm/kdmrc
-fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOCONSOLEKEYBOARD}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Setting up console keyboard..."
-
-# live-initramfs script
-
-kbd=
-cslayout=
-csvariant=
-csmodel=
-
-# commandline
-if [ -n "${KBD}" ]
-then
- kbd="${KBD}"
-else
- kbd=us
-fi
-
-really_export kbd
-
-if [ -n "${KLAYOUT}" ]
-then
- cslayout="${KLAYOUT}"
-fi
-
-if [ -n "${KVARIANT}" ]
-then
- csvariant="${KVARIANT}"
-fi
-
-if [ -n "${KMODEL}" ]
-then
- csmodel="${KMODEL}"
-fi
-
-if [ -x /root/bin/setupcon ] && [ -f /root/etc/default/console-setup ]
-then
- if [ "${cslayout}" ]
- then
- chroot /root sed -i "s/^XKBLAYOUT=.*/XKBLAYOUT=\"${cslayout}\"/" \
- /etc/default/console-setup
-
- if [ "${csvariant}" ]
- then
- chroot /root sed -i "s/^XKBVARIANT=.*/XKBVARIANT=\"${csvariant}\"/" \
- /etc/default/console-setup
- else
- live-preseed /root console-setup/variantcode '' false
- fi
-
- if [ "${csmodel}" ]
- then
- chroot /root sed -i "s/^XKBMODEL=.*/XKBMODEL=\"${csmodel}\"/" \
- /etc/default/console-setup
- else
- live-preseed /root console-setup/modelcode '' false
- fi
- else
- live-preseed /root console-setup/layoutcode '' false
- live-preseed /root console-setup/variantcode '' false
- live-preseed /root console-setup/modelcode '' false
- fi
-
- sed -i 's/CONSOLE_SCREEN=$/CONSOLE_SCREEN=setupcon/; t END; b; : END; n; b END' /root/etc/init.d/usplash
-else
- chroot /root /usr/sbin/install-keymap ${kbd}
- live-preseed /root debian-installer/keymap "${kbd}"
- live-preseed /root kbd-chooser/method "${kbd}"
-fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOXAUTOCONFIG}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Configuring X..."
-
-# live-initramfs script
-
-if [ "${TERM_TYPE}" = "serial" ]
-then
- # Don't bother trying to configure or start X on a serial console
- rm -f /root/etc/rc?.d/S??[gkx]dm
- exit 0
-fi
-
-if [ -n "${TEXTONLY}" ]
-then
- exit 0
-fi
-
-locale=en_US.UTF-8
-
-mount -n -o bind /sys /root/sys
-mount -n -o bind /proc /root/proc
-mount -n -o bind /dev /root/dev
-
-if [ -n "${XDEBCONF}" -a -x /root/usr/sbin/xdebconfigurator ]
-then
- # xdebconfigurator
- chroot /root /usr/sbin/xdebconfigurator
-fi
-
-if [ -n "${KOPTIONS}" ]
-then
- setoptions="set xserver-xorg/config/inputdevice/keyboard/options ${KOPTIONS}"
-fi
-
-if [ -n "${KVARIANT}" ]
-then
- setvariant="set xserver-xorg/config/inputdevice/keyboard/variant ${KVARIANT}"
-fi
-
-if [ -n "${KMODEL}" ]
-then
- setmodel="set xserver-xorg/config/inputdevice/keyboard/model ${KMODEL}"
-fi
-
-chroot /root debconf-communicate -fnoninteractive live-initramfs > /dev/null << EOF
-set xserver-xorg/config/inputdevice/keyboard/layout ${kbd}
-${setvariant}
-${setmodel}
-${setoptions}
-EOF
-
-DEBUG_XORG_PACKAGE=1 DEBUG_XORG_DEBCONF=1 live-reconfigure /root xserver-xorg
-umount /root/sys
-umount /root/proc
-umount /root/dev
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOXAUTOCONFIG}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Configuring X kludges..."
-
-# live-initramfs script
-
-if [ -n "$XVIDEOMODE" ]
-then
- mount -n -o bind /sys /root/sys
- mount -n -o bind /proc /root/proc
- mount -n -o bind /dev /root/dev
-
-chroot /root debconf-communicate -fnoninteractive live-initramfs > /dev/null << EOF
-set xserver-xorg/config/monitor/mode-list ${XVIDEOMODE}
-set xserver-xorg/config/display/modes ${XVIDEOMODE}
-EOF
-
- chroot /root dexconf
-
- umount /root/sys
- umount /root/proc
- umount /root/dev
-fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOGNOMEPANEL}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Configuring gnome-panel-data..."
-
-# live-initramfs script
-
-if [ -x /root/usr/sbin/laptop-detect ]
-then
- if chroot /root laptop-detect
- then
- live-reconfigure /root gnome-panel-data
- fi
-fi
-
-panel_version=$(chroot /root /usr/bin/dpkg-query -W --showformat='${Version}' gnome-panel-data 2>/dev/null) || panel_version=""
-
-if [ -n "${panel_version}" ]
-then
- chroot /root sudo -u "${USERNAME}" gconftool-2 -s -t bool /apps/panel/global/disable_lock_screen true
-fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOXSCREENSAVER}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Configuring screensaver..."
-
-# live-initramfs script
-
-gnome_screensaver_version=$(chroot /root dpkg-query -W --showformat='${Version}' gnome-screensaver 2>/dev/null) || gnome_screensaver_version=""
-
-if [ -n "${gnome_screensaver_version}" ]
-then
- # Support legacy gconf value
- chroot /root sudo -u "${USERNAME}" gconftool-2 -t bool -s /apps/gnome-screensaver/lock false
- chroot /root sudo -u "${USERNAME}" gconftool-2 -t bool -s /apps/gnome-screensaver/lock_enabled false
-fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-. /scripts/live-functions
-
-log_begin_msg "Preconfiguring /etc/modules..."
-
-# live-initramfs script
-
-# load the right modules
-case "${DPKG_ARCH}" in
- powerpc|ppc64)
- echo snd_powermac >> /root/etc/modules
- ;;
-esac
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NONETWORKING}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Preconfiguring networking..."
-
-# live-initramfs script
-
-IFFILE="/root/etc/network/interfaces"
-
-if [ "${STATICIP}" = "frommedia" -a -e "${IFFILE}" ]
-then
- # will use existent /etc/network/interfaces
- log_end_msg
- exit 0
-fi
-
-cat > "${IFFILE}" << EOF
-auto lo
-iface lo inet loopback
-
-EOF
-
-if [ -x /sbin/udevadm ]
-then
- # lenny
- udevadm trigger
- udevadm settle
-else
- # etch
- udevtrigger
- udevsettle
-fi
-
-if [ -z "${NETBOOT}" -a -n "${STATICIP}" -a "${STATICIP}" != "frommedia" ]
-then
- parsed=$(echo "${STATICIP}" | sed -e 's/:/ /g')
-
- for ifline in ${parsed}
- do
- ifname="$(echo ${ifline} | cut -f1 -d ',')"
- ifaddress="$(echo ${ifline} | cut -f2 -d ',')"
- ifnetmask="$(echo ${ifline} | cut -f3 -d ',')"
- ifgateway="$(echo ${ifline} | cut -f4 -d ',')"
-
-cat >> "${IFFILE}" << EOF
-auto ${ifname}
-iface ${ifname} inet static
- address ${ifaddress}
- netmask ${ifnetmask}
- gateway ${ifgateway}
-
-EOF
-
- done
-else
- if [ -z "${NETBOOT}" ]
- then
- # default, dhcp assigned
- method="dhcp"
- else
- # make sure that the preconfigured interface would not get reassigned by dhcp
- # on startup by ifup script - otherwise our root fs might be disconnected!
- method="manual"
- fi
-
- # iterate the physical interfaces and add them to the interfaces list
- if [ "${method}" != dhcp ] || [ ! -x /root/usr/sbin/NetworkManager ]
- then
- for interface in /sys/class/net/eth* /sys/class/net/ath* /sys/class/net/wlan*
- do
- [ -e ${interface} ] || continue
- i="$(basename ${interface})"
-
-cat >> "${IFFILE}" << EOF
-auto ${i}
-iface ${i} inet ${method}
-
-EOF
-
- done
- fi
-
- if [ ! -f /root/etc/resolv.conf ] || [ -z "$(cat /root/etc/resolv.conf)" ]
- then
- if [ -f /netboot.config ]
- then
- # create a resolv.conf if it is not present or empty
- cp /netboot.config /root/var/log/netboot.config
-
- rc_search=$(cat netboot.config | awk '/domain/{print $3}')
- rc_server0=$(cat netboot.config | awk '/dns0/{print $5}')
- rc_server1=$(cat netboot.config | awk '/dns0/{print $8}')
- rc_server0="nameserver ${rc_server0}"
-
- if [ "${rc_server1}" = "0.0.0.0" ]
- then
- rc_server1=""
- else
- rc_server1="nameserver ${rc_server1}"
- fi
-
-cat > /root/etc/resolv.conf << EOF
-# /etc/resolv.conf
-# Autogenerated by live-initramfs
-search ${rc_search}
-domain ${rc_search}
-${rc_server0}
-${rc_server1}
-EOF
-
- cat /root/etc/resolv.conf >> /root/var/log/netboot.config
- fi
- fi
-fi
-
-#if [ ! -x /root/usr/sbin/NetworkManager ]
-#then
-# for i in eth0 eth1 eth2 ath0 wlan0
-# do
-# grep -q "iface ${i}" ${IFFILE} && continue
-#
-#cat >> "${IFFILE}" << EOF
-#auto ${i}
-#iface ${i} inet dhcp
-#
-#EOF
-#
-# done
-#fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOPRESEED}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Loading preseed file..."
-
-# live-initramfs script
-
-if [ -e /preseed.cfg ]
-then
- chroot /root debconf-set-selections < /preseed.cfg
-fi
-
-if [ -f "/root/${LOCATION}" ]
-then
- chroot /root debconf-set-selections < "/root/${LOCATION}"
-fi
-
-if [ -n "${PRESEEDS}" ]
-then
- for preseed in ${PRESEEDS}
- do
- question="${preseed%%=*}"
- value="${preseed#*=}"
-
- live-preseed /root "${question}" "${value}"
- done
-fi
-
-reply="$(echo "GET preseed/early_command" | chroot /root debconf-communicate -fnoninteractive live-initramfs)"
-
-if [ "${reply#0 }" != "${reply}" ]
-then
- reply="${reply#0 }"
- sh -c "${reply}"
-fi
-
-# Clear out debconf database backup files to save memory.
-rm -f /root/var/cache/debconf/*.dat-old
-
-log_end_msg
-
-exit 0
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-. /scripts/live-functions
-
-log_begin_msg "Setting up init..."
-
-# live-initramfs script
-
-# Arrange for shells on virtual consoles, rather than login prompts
-
-if [ -z "${NOAUTOLOGIN}" ]
-then
- if [ -n "${USERNAME}" ]
- then
- if [ ! -z "${LIVE_GETTY}" ]
- then
- if echo "${DEFCONSOLE}" | grep -qs ttyS
- then
- # AUTOMATIC SERIAL CONSOLE #
- PORT=$(echo "${DEFCONSOLE}" | \
- sed -e 's%,.*%%')
- SPEED=$(echo "${DEFCONSOLE}" | \
- sed -e 's%ttyS[0-9]\+,%%' \
- -e's%\([0-9]\+\).*%\1%')
-
- if ! ( sed -n -e'/^[^#]/p' /root/etc/inittab | grep -qs ":respawn:/sbin/getty.*${PORT}" )
- then
- IDs="A B C D E F G H I J K L M N O P Q R S T Q U V V X Y Z 0 1 2 3 4 5 6 7 8 9"
-
- for ID1 in ${IDs}
- do
- for ID2 in ${IDs}
- do
- ID="${ID1}${ID2}"
-
- if ! grep "^${ID}:" /etc/inittab
- then
- #make sure it is not already in use
- break 2
- fi
- done
- done
-
- echo "${ID}:2345:respawn:/sbin/live-getty -L ${PORT} ${SPEED} vt100" >> /root/etc/inittab
- fi
- fi
-
- if [ -f /root/etc/inittab ]
- then
- sed -i -e'/^[^#]/s%respawn:/sbin/getty%respawn:/sbin/live-getty%' /root/etc/inittab
- fi
- else
- if [ -f /root/etc/inittab ]
- then
- sed -i -e "s|^\([^:]*:[^:]*:[^:]*\):.*getty.*\<\(tty[0-9]*\).*$|\1:/bin/login -f ${USERNAME} </dev/\2 >/dev/\2 2>\&1|" /root/etc/inittab
- fi
-
- if [ "/root/etc/event.d/tty*" != "$(echo /root/etc/event.d/tty*)" ]
- then
- for f in /root/etc/event.d/tty*
- do
- sed -i -e "s|^respawn.*|respawn /bin/login -f ${USERNAME} </dev/$(basename ${f}) > /dev/$(basename ${f}) 2>\&1|" ${f}
- done
- fi
- fi
-
- # Since we use autologin, lastlog doesn't make sense on the console.
- sed -i '/^[^#].*pam_lastlog\.so/s/^/# /' /root/etc/pam.d/login
- fi
-fi
-
-# do not try to remove files if using file-rc
-if [ -d /etc/rc0.d ]
-then
- # This has the nice side effect of the cron.{daily,weekly,monthly} jobs in
- # /etc/crontab remaining disabled, yet also not run by anacron
- if [ -x /root/usr/sbin/anacron ]
- then
- chroot /root dpkg-divert --add --rename --quiet /usr/sbin/anacron
- ln -s /bin/true /usr/sbin/anacron
- fi
-
- # No point, really
- rm -f /root/etc/rc?.d/[SK]??postfix
-
- # Avoid clobbering the user's clock
- rm -f /root/etc/rc?.d/K??hwclock.sh
-fi
-
-# Disable readahead since it doesn't play well with squashfs + unionfs
-# use chmod instead of mv to not trigger unionfs bugs.
-if [ -e /root/sbin/readahead-list ]
-then
- chmod -x /root/sbin/readahead-list
-fi
-
-log_end_msg
-
-exit 0
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOACCESSIBILITY}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Configuring accessibility options..."
-
-# live-initramfs script
-
-gconf_version=$(chroot /root /usr/bin/dpkg-query -W --showformat='${Version}' gconf2 2>/dev/null) || gconf_version=""
-
-gct ()
-{
- if [ "${gconf_version}" ]
- then
- chroot /root sudo -u "${USERNAME}" gconftool-2 "${@}"
- fi
-}
-
-case ${ACCESS} in
- access=v1)
- # Lesser Visual Impairment
- gct -s -t string /desktop/gnome/interface/gtk_theme HighContrastLargePrint
- gct -s -t string /desktop/gnome/interface/icon_theme HighContrast
- gct -s -t string /desktop/gnome/interface/monospace_font_name "monospace 18"
- gct -s -t string /desktop/gnome/interface/font_name "sans 18"
- gct -s -t string /apps/metacity/general/theme Atlanta
- gct -s -t string /desktop/gnome/background/picture_filename ""
- gct -s -t string /desktop/gnome/background/picture_options none
- gct -s -t string /desktop/gnome/background/primary_color \#666666
- gct -s -t string /desktop/gnome/background/secondary_color \#7F7F7F
- gct -s -t string /desktop/gnome/background/color_shading_type solid
- gct -s -t int /desktop/gnome/peripherals/mouse/cursor_size 48
- gct -s -t string /desktop/gnome/peripherals/mouse/cursor_theme whiteglass
- ;;
-
- access=v2)
- # Moderate Visual Impairment
- gct -s -t bool /desktop/gnome/interface/accessibility true
- gct -s -t bool /desktop/gnome/applications/at/visual/startup true
- gct -s -t bool /apps/gksu/disable-grab true
-
- if type orca > /dev/null 2>&1
- then
- mkdir -p /root/home/${USERNAME}/.orca
- echo "import orca.settings" >> /root/home/${USERNAME}/.orca/user-settings.py
- echo "orca.settings.enableSpeech = False" >> /root/home/${USERNAME}/.orca/user-settings.py
- echo "orca.settings.enableMagnifier = True" >> /root/home/${USERNAME}/.orca/user-settings.py
- chroot /root chown -R ${USERNAME}:${USERNAME} /home/${USERNAME}/.orca
- fi
- ;;
-
- access=v3)
- # Blindness
- # Disabled for now, until we know eSpeak works.
- #gct -s -t bool /desktop/gnome/sound/enable_esd false
- gct -s -t bool /desktop/gnome/interface/accessibility true
- gct -s -t bool /desktop/gnome/applications/at/visual/startup true
- gct -s -t bool /apps/gksu/disable-grab true
- gct -s -t string /desktop/gnome/applications/window_manager/default /usr/bin/metacity
- ;;
-
- braille=ask)
- # Braille
- gct -s -t bool /desktop/gnome/interface/accessibility true
- gct -s -t bool /desktop/gnome/applications/at/visual/startup true
- gct -s -t bool /apps/gksu/disable-grab true
- gct -s -t string /desktop/gnome/applications/window_manager/default /usr/bin/metacity
-
- if type orca > /dev/null 2>&1
- then
- mkdir -p /root/home/${USERNAME}/.orca
- echo "import orca.settings" >> /root/home/${USERNAME}/.orca/user-settings.py
- echo "orca.settings.enableSpeech = False" >> /root/home/${USERNAME}/.orca/user-settings.py
- echo "orca.settings.enableBraille = True" >> /root/home/${USERNAME}/.orca/user-settings.py
- chroot /root chown -R ${USERNAME}:${USERNAME} /home/${USERNAME}/.orca
- fi
- ;;
-
- access=m1)
- # Minor Motor Difficulties
- gct -s -t bool /desktop/gnome/accessibility/keyboard/enable true
- gct -s -t bool /desktop/gnome/accessibility/keyboard/mousekeys_enable true
- gct -s -t bool /desktop/gnome/accessibility/keyboard/stickykeys_enable true
- gct -s -t bool /desktop/gnome/accessibility/keyboard/stickykeys_modifier_beep true
- gct -s -t bool /desktop/accessibility/gnome/keyboard/stickykeys_two_key_off false
- gct -s -t bool /desktop/gnome/peripherals/keyboard/repeat true
- gct -s -t int /desktop/gnome/peripherals/keyboard/delay 700
- gct -s -t int /desktop/gnome/peripherals/keyboard/rate 10
- gct -s -t bool /apps/gksu/disable-grab true
-
- if [ -e /root/etc/xdg/xfce4/mcs_settings/keyboard.xml ]
- then
- sed -i 's/0/1/' /root/etc/xdg/xfce4/mcs_settings/keyboard.xml
- fi
- ;;
-
- access=m2)
- # Motor Difficulties - pointing devices
- gct -s -t bool /desktop/gnome/accessibility/keyboard/enable true
- gct -s -t bool /desktop/gnome/interface/accessibility true
- gct -s -t bool /desktop/gnome/accessibility/keyboard/stickykeys_enable true
- gct -s -t bool /desktop/gnome/accessibility/keyboard/stickykeys_modifier_beep false
- gct -s -t bool /desktop/accessibility/gnome/keyboard/stickykeys_two_key_off false
- gct -s -t list --list-type=string /desktop/gnome/accessibility/startup/exec_ats [onboard]
-
- if [ -e /root/etc/xdg/xfce4/mcs_settings/keyboard.xml ]
- then
- sed -i '/Sticky/ s/0/1/' /root/etc/xdg/xfce4/mcs_settings/keyboard.xml
- fi
- ;;
-esac
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOUPDATENOTIFIER}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Disabling update-notifier..."
-
-# live-initramfs script
-
-# For GNOME, we divert away apt-check to avoid a regular 'apt-get update'
-# equivalent in the live session. We want to run update-notifier for crash
-# report handling.
-chroot /root dpkg-divert --add --rename --quiet \
- /usr/lib/update-notifier/apt-check
-
-ln -s /bin/true /root/usr/lib/update-notifier/apt-check
-
-# For KDE, adept_notifier's only useful function at the moment is an
-# 'apt-get update' equivalent, so we disable it entirely.
-rm -f /root/usr/share/autostart/adept_notifier_auto.desktop
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOPOWERMANAGEMENT}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Configuring power management..."
-
-# live-initramfs script
-
-gpm_version=$(chroot /root /usr/bin/dpkg-query -W --showformat='${Version}' gnome-power-manager 2>/dev/null) || panel_version=""
-
-if [ -n "${gpm_version}" ]
-then
- #live-reconfigure /root gnome-power-manager
- # Gnome < 2.20
- chroot /root sudo -u "${USERNAME}" gconftool-2 -s -t bool /apps/gnome-power-manager/can_hibernate false
- # Gnome >= 2.20
- chroot /root sudo -u "${USERNAME}" gconftool-2 -s -t bool /apps/gnome-power-manager/general/can_hibernate false
-fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOPROGRAMCRASHES}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Enabling notifications about program crashes..."
-
-# live-initramfs script
-
-update_notifier_version=$(chroot /root dpkg-query -W --showformat='${Version}' update-notifier 2>/dev/null) || update_notifier_version=""
-
-if [ -n "${update_notifier_version}" ]
-then
- chroot /root sudo -u "${USERNAME}" gconftool-2 -t bool -s /apps/update-notifier/show_apport_crashes true
-fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOKPERSONALIZER}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Disabling kpersonalizer..."
-
-# live-initramfs script
-
-if chroot /root /usr/bin/which kpersonalizer >/dev/null
-then
- # Disable first-login wizard for KDE
- if [ ! -f /root/etc/kde3/kpersonalizerrc ]
- then
-
-cat > /root/etc/kde3/kpersonalizerrc << EOF
-[General]
-FirstLogin=false
-EOF
-
- else
- echo "I'm not smart enough to disable kpersonalizer startup" >&2
- echo "Because kpersonalizerrc already exists" >&2
- fi
-fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOLANGUAGESELECTOR}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Fixing language selector..."
-
-# live-initramfs script
-
-if [ -e /root/usr/share/applications/language-selector.desktop ]
-then
- sed -i '/^Exec/ s|/usr/bin/gnome-language-selector|& -n|' /root/usr/share/applications/language-selector.desktop
-fi
-
-if [ -x /root/usr/bin/fontconfig-voodoo ]
-then
- chroot /root fontconfig-voodoo --auto --quiet || true
-fi
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOTIMEZONE}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Disabling trackerd..."
-
-# live-initramfs script
-
-rm -f /root/etc/xdg/autostart/tracker-applet.desktop \
- /root/etc/xdg/autostart/trackerd.desktop \
- /root/usr/share/autostart/trackerd.desktop
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-PREREQ=""
-
-. /scripts/live-functions
-
-prereqs()
-{
- echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-if [ -n "${NORESTRICTEDMANAGER}" ]
-then
- exit 0
-fi
-
-log_begin_msg "Disabling restricted-manager..."
-
-rm -f /root/etc/xdg/autostart/restricted-manager.desktop
-rm -f /root/etc/xdg/autostart/restricted-manager-kde.desktop
-
-# Since we disable restricted-manager, there isn't much point generating the
-# fglrx or nvidia modules either. The other restricted modules may still be
-# useful.
-sed -i 's/^DISABLED_MODULES=""/DISABLED_MODULES="fglrx nv"/' \
- /root/etc/default/linux-restricted-modules-common
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOAPTCDROM}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Adding APT-CDROM source..."
-
-# live-initramfs script
-
-chroot /root apt-cdrom -m add
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -n "${NOAPPARMOR}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Disabling AppArmor (does not work with stacked file systems)..."
-
-# live-initramfs script
-
-chroot /root update-rc.d -f apparmor remove
-
-log_end_msg
+++ /dev/null
-#!/bin/sh
-
-#set -e
-
-# initramfs-tools header
-
-PREREQ=""
-
-prereqs()
-{
- echo "${PREREQ}"
-}
-
-case "${1}" in
- prereqs)
- prereqs
- exit 0
- ;;
-esac
-
-# live-initramfs header
-
-if [ -z "${HOOK}" ]
-then
- exit 0
-fi
-
-. /scripts/live-functions
-
-log_begin_msg "Executing custom hook script..."
-
-# live-initramfs script
-
-cd /root
-chroot /root wget "${HOOK}"
-
-FILE="$(basename ${HOOK})"
-
-chmod 0755 "${FILE}"
-./"${FILE}"
-rm -f "${FILE}"
-
-log_end_msg
projects / live-initramfs-grml.git / commitdiff