Drop 10_support_ethdevice.dpatch (applied upstream).

diff --git a/debian/patches/00list b/debian/patches/00list
index fb6e178..ee492ae 100644 (file)
--- a/debian/patches/00list
+++ b/debian/patches/00list
@@ -2,7 +2,6 @@
 05_boot_failure_message_grml.dpatch
 07_support_findiso.dpatch
 09_fix_resolvconf_pxeboot.dpatch
-10_support_ethdevice.dpatch
 11_dhcphostname.patch
 12_uuid_support.dpatch
 13_always_display_warnings_and_failures.dpatch

diff --git a/debian/patches/10_support_ethdevice.dpatch b/debian/patches/10_support_ethdevice.dpatch
deleted file mode 100755 (executable)
index bf5fe4f..0000000
--- a/debian/patches/10_support_ethdevice.dpatch
+++ /dev/null
@@ -1,91 +0,0 @@
-#! /bin/sh /usr/share/dpatch/dpatch-run
-## 10_support_ethdevice.dpatch by <mika@grml.org>
-##
-## All lines beginning with `## DP:' are a description of the patch.
-## DP: Support bootoptions ethdevice and ethdevice-timeout for
-## DP: specifying from which device you want to boot from and
-## DP: using which timeout (being 30 seconds if unconfigured), if
-## DP: ethdevice is not specified try to get a working network
-## DP: configuration for each existing network device.
-
-@DPATCH@
-diff -urNad live-initramfs-grml~/scripts/live live-initramfs-grml/scripts/live
---- live-initramfs-grml~/scripts/live  2009-12-29 22:00:53.858638095 +0100
-+++ live-initramfs-grml/scripts/live   2009-12-29 22:04:16.588656569 +0100
-@@ -66,6 +66,16 @@
-                               set -x
-                               ;;
- 
-+                      ethdevice=*)
-+                              ETHDEVICE="${ARGUMENT#ethdevice=}"
-+                              export ETHDEVICE
-+                              ;;
-+
-+                      ethdevice-timeout=*)
-+                              ETHDEV_TIMEOUT="${ARGUMENT#ethdevice-timeout=}"
-+                              export ETHDEV_TIMEOUT
-+                              ;;
-+
-                       fetch=*)
-                                 FETCH="${ARGUMENT#fetch=}"
-                                 export FETCH
-@@ -739,7 +749,48 @@
-               udevsettle
-       fi
- 
--      ipconfig ${DEVICE} | tee /netboot.config
-+      # if ethdevice was not specified on the kernel command line
-+      # make sure we try to get a working network configuration
-+      # for *every* present network device (except for loopback of course)
-+      if [ -z "$ETHDEVICE" ] ; then
-+              echo "If you want to boot from a specific device use bootoption ethdevice=..."
-+              for device in /sys/class/net/*; do
-+                      dev=${device##*/} ;
-+                      if [ "$dev" != "lo" ] ; then
-+                              ETHDEVICE="$ETHDEVICE $dev"
-+                      fi
-+              done
-+      fi
-+
-+      # split args of ethdevice=eth0,eth1 into "eth0 eth1"
-+      for device in $(echo $ETHDEVICE | sed 's/,/ /g') ; do
-+              devlist="$devlist $device"
-+      done
-+
-+      [ -n "$ETHDEV_TIMEOUT" ] || ETHDEV_TIMEOUT=15
-+      echo "Using timeout of $ETHDEV_TIMEOUT seconds for network configuration."
-+
-+      # this is tricky (and ugly) because ipconfig sometimes just hangs/runs into
-+      # an endless loop; iff execution fails give it two further tries, that's
-+      # why we use '$devlist $devlist $devlist' for the other for loop
-+      for dev in $devlist $devlist $devlist ; do
-+              echo "Executing ipconfig -t $ETHDEV_TIMEOUT $dev"
-+              ipconfig -t "$ETHDEV_TIMEOUT" $dev | tee -a /netboot.config &
-+              jobid=$!
-+              sleep "$ETHDEV_TIMEOUT" ; sleep 1
-+              if [ -r /proc/"$jobid"/status ] ; then
-+                      echo "Killing job $jobid for device $dev as ipconfig ran into recursion..."
-+                      kill -9 $jobid
-+              fi
-+
-+              # if configuration of device worked we should have an assigned
-+              # IP address, iff so let's use the according as $DEVICE for later usage
-+              # simple and primitive approach which seems to work fine
-+              if ifconfig $dev | grep -q 'inet.*addr:' ; then
-+                      export DEVICE="$dev"
-+                      break
-+              fi
-+      done
- 
-       # source relevant ipconfig output
-       OLDHOSTNAME=${HOSTNAME}
-@@ -748,7 +799,8 @@
-       export HOSTNAME
- 
-       # Check if we have a network device at all
--      if ! ls /sys/class/net/eth0 > /dev/null 2>&1 && \
-+      if ! ls /sys/class/net/"$DEVICE" > /dev/null 2>&1 && \
-+         ! ls /sys/class/net/eth0 > /dev/null 2>&1 && \
-          ! ls /sys/class/net/wlan0 > /dev/null 2>&1 && \
-          ! ls /sys/class/net/ath0 > /dev/null 2>&1 && \
-          ! ls /sys/class/net/ra0 > /dev/null 2>&1