1 grml2usb (0.9.9) UNRELEASED; urgency=low
3 * Use ascii.pf2 as grub2 font, since grub2 (1.96+20090307-1)
4 the old ascii.pff isn't available anymore.
5 * Use terminal_output if available, otherwise fallback to old
6 older 'terminal'-command (thanks to Felix Zielcke for helping).
7 * Document the 'grub-setup fails after Attempting to install GRUB
8 to a partition instead of the MBR' issue.
9 * Use "set gfxpayload=1024x768x16,1024x768" instead of vga=791 in
10 grub2 configuration. This requires a recent version of the linux
11 loader as the new linux loader loads the kernel at 32bit entry point
12 and not at 16 bit anymore so it has to be translated for the Linux
13 kernel (as the kernel parses vga= in 16 bit code). In the long run
14 we don't seem to have another option, so let's change it.
15 Thanks to Felix Zielcke and Robert Millan for first hand information.
16 * Increase timeout from 5 to 10 seconds in grub2 configuration.
17 * Load memtest86+ binary via 'linux16' in grub2 (otherwise it fails).
18 * Drop the serial boot entry from grub2 (I assume users with usb
19 pens don't need that option).
20 * Change the way MirOS bsd4grml is loaded (use the fallback method
22 * Improve descriptions of grml's grub2 entries.
23 * Bump Standards-Version to 3.8.3 (no further changes).
25 -- Michael Prokop <mika@grml.org> Tue, 18 Aug 2009 12:26:58 +0200
27 grml2usb (0.9.8) unstable; urgency=low
29 * Support installation on /dev/loop*-devices.
30 * Generate configuration for syslinux and grub by default, no
31 matter which bootloader the users chooses.
32 * Added options --skip-syslinux-config and --skip-grub-config
33 if someone wants to skip the generation of any bootloader
35 * Make sure grub-install is available before executing it.
36 * Display information about default grml flavour and the other
37 available grml flavours at the end of the grml2usb run.
38 * Use /sbin/blkid (e2fsprogs) instead of vol_id as vol_id is going to be
39 removed from udev. Thanks for the patch to Andras Korn!
40 * Use rsync instead of cp. Thanks for the patch to Andras Korn!
42 * Use 'forensic' and 'readonly' in the forensic bootoption itself.
43 * Spelling fixes (thanks to Thorsten Glaser <tg@mirbsd.org>).
44 * Write GRUB2 config even if the target is a directory (thanks, Thorsten)
45 * All these "set root=" are not needed for GRUB2 (thanks, Thorsten)
46 * Switch order of check whether the specified device is a directory
47 and check for usb device (as the usb device check will fail if
49 * Add grml2iso for creating a bootable DVD:
50 - thanks once more to Thorsten Glaser for helping and patches
51 - thanks to Ernesto Domato for reporting the issue regarding
52 i386<->amd64 with grub-mkimage
53 * Move syslinux check to install_syslinux_mbr()
54 * Drop the reference to --grub option (thanks for the bugreport
56 * Update documentation:
57 - mention the dd approach
59 - improve section link names for the online version
60 - add 'grub-probe: error: unknown filesystem'
61 * Support use with python version 2.4.
62 * Bump Standard Version to 3.8.2 (no further changes).
63 * Depend on debhelper >=5 (using compat version 5).
65 -- Michael Prokop <mika@grml.org> Tue, 21 Jul 2009 18:01:50 +0200
67 grml2usb (0.9.7) unstable; urgency=low
69 * Fix typo in manpage of grml2usb (thanks to Wernfried Haas).
70 * Fix bootoption toram: it should be toram=$FLAVOUR.squashfs instead
71 of toram=$FLAVOUR. Thanks to Wernfried Haas and Frank Prochnow
72 for the bugreport and debugging! [Closes: issue680]
74 -- Michael Prokop <mika@grml.org> Tue, 02 Jun 2009 23:32:13 +0200
76 grml2usb (0.9.6) unstable; urgency=low
78 * Support installation of the currently running grml live
79 system ("grml2usb /live/image /dev/sdx1").
80 * Add "persistent" entry to grub/syslinux menu. [Closes: issue669]
82 -- Michael Prokop <mika@grml.org> Wed, 20 May 2009 19:32:02 +0200
84 grml2usb (0.9.5) unstable; urgency=low
86 * Fix dashes of options in manpage (thanks for the bugreport,
88 * Display program version during execution.
89 * Apply fix by Peter Daum <gator@cs.tu-berlin.de>, making sure
90 to use the normalized path for unmounting. Thanks!
91 * Use 'multiboot' for booting MirOS BSD when using grub2.
92 * Catch exception if copying files fails.
93 * Make sure to exit if installing grub fails.
94 * Integrate hdt (Hardware Detection Tool) in bootsplash (but
95 only if using syslinux as grub isn't supported).
97 -- Michael Prokop <mika@grml.org> Mon, 04 May 2009 22:31:30 +0200
99 grml2usb (0.9.4) unstable; urgency=low
101 * Bugfix: move kernel commandline from initrd to kernel option in
102 generate_flavour_specific_grub2_config().
104 -- Michael Prokop <mika@grml.org> Thu, 09 Apr 2009 00:04:56 +0200
106 grml2usb (0.9.3) unstable; urgency=low
108 * Drop some leftover 'lang=us' references.
109 * Update mbr.S (thanks, Thorsten Glaser).
110 * Rename --mbr-manager into --mbr-menu (people seem to be confused
111 what this option does). Improve the according documentation.
112 * Update failsafe bootoption.
113 * Fix comments section in manpage (thanks for reporting,
114 Alexander Steinböck).
115 * Mention the Debian package in the error message (thanks to
116 Lothar Speil for the bugreport).
117 * Mention grml-repository in the docs.
118 * Support older kernel versions in check for removable usb device.
119 (Thanks to Ralf Gross for the report and relevant information.)
120 * Also add specified bootoptions to default entry in configuration
121 file of grub version 1. (Thanks to Ralf Gross for the bugreport.)
122 * Make sure that options "--quiet" and "--verbose" aren't accepted
123 at the same time in the command line. Thanks for bugreport and
124 code example, Karl Voit!
125 * Bump Standard Version to 3.8.1 (no further changes).
126 * Set debhelper's compat version from 4 to 5.
128 -- Michael Prokop <mika@grml.org> Wed, 08 Apr 2009 00:09:46 +0200
130 grml2usb (0.9.2) unstable; urgency=low
132 * Rewrote grml2usb from scratch (in python). New features:
133 - you no longer need to setup the device via /etc/fstab, just
134 directly invoke "grml2usb /path/to/iso /dev/sdb1"
135 - initial multi-iso / multi-boot support
136 [Closes: issue501] [Closes: issue584]
137 - provide *several* new options like --bootloader-only,
138 --bootoptions=... check out the manpage for all the details
139 - get rid of "polution" of root directory on usb-pen
141 - always write a default MBR (thanks a lot to the work
142 and help of Thorsten Glaser!) [Closes: issue295]
143 - use grub by default (but support for syslinux is present as
145 - fix regressions for temporary mountpoints / wrong directories
146 [Closes: issue603] [Closes: issue602]
147 * Update debian stuff:
148 - Bump Standard Version to 3.8.0 (no further changes)
149 - Change XS-Vcs-* to Vcs-* headers and replace mercurial with
150 grml's nowadays git repository URLs
151 - drop mtools from depends
152 - slightly improve long description
153 - add asciidoc, xsltproc and docbook-xsl to Build-Depends
154 - either depend on syslinux | grub2 | grub
156 -- Michael Prokop <mika@grml.org> Mon, 02 Mar 2009 16:40:55 +0100
158 grml2usb (0.9.1) unstable; urgency=low
160 * Fix problem with comment chars in /etc/fstab.
161 Thanks for debugging and the patch to Robert Euhus!
162 * Some minor cleanups in Debian packaging.
164 -- Michael Prokop <mika@grml.org> Sun, 25 May 2008 01:29:30 +0200
166 grml2usb (0.9.0) unstable; urgency=low
168 * Support new directory layout of different grml-flavours
169 * Fix uninstall option (really clean up usb device)
171 -- Michael Prokop <mika@grml.org> Sat, 23 Feb 2008 23:43:57 +0100
173 grml2usb (0.8.0) unstable; urgency=low
175 * Fix the "mv: cannot move `/mnt/usb-sdb1/boot/grub' to a subdirectory of
176 itself, `/mnt/usb-sdb1/grub'" issue.
178 -- Michael Prokop <mika@grml.org> Sat, 19 Jan 2008 16:57:08 +0100
180 grml2usb (0.7.8) unstable; urgency=low
182 * Adjust grml2usb for a present grub directory.
184 -- Michael Prokop <mika@grml.org> Fri, 16 Nov 2007 08:29:20 +0100
186 grml2usb (0.7.7) unstable; urgency=low
188 * Improve error handling for execution of syslinux.
190 -- Michael Prokop <mika@grml.org> Thu, 13 Sep 2007 01:38:31 +0200
192 grml2usb (0.7.6) unstable; urgency=low
194 * The "reworked grml2usb for JUXLALA"-release.
195 * Added fs check via vol_id.
196 * Improved error handling.
197 * Fixed some code parts regarding use of $TMPMNT.
199 -- Michael Prokop <mika@grml.org> Fri, 08 Jun 2007 18:07:09 +0200
201 grml2usb (0.7.5) unstable; urgency=low
203 * supporting directories and direct blockdevices as source for the iso.
205 -- Michael Gebetsroither <gebi@grml.org> Tue, 03 Apr 2007 23:28:19 +0200
207 grml2usb (0.7.4) unstable; urgency=low
209 * Get rid of bashism, thanks for reporting - Paul Weaver!
210 * Change version schema from x.y-z to x.y.z.
212 -- Michael Prokop <mika@grml.org> Fri, 16 Mar 2007 14:43:49 +0100
214 grml2usb (0.7-3) unstable; urgency=low
216 * The manpage was just a template, added the missing documentation
217 now. Thanks for reporting, Jens Heidrich!
219 -- Michael Prokop <mika@grml.org> Sat, 3 Feb 2007 11:08:30 +0100
221 grml2usb (0.7-2) unstable; urgency=low
223 * Use 'Architecture: all' in debian/control so we can use the
224 package on non-x86 as well.
225 * Bumb Standard Version to 3.7.2 (no further changes).
227 -- Michael Prokop <mika@grml.org> Sat, 11 Nov 2006 12:46:35 +0100
229 grml2usb (0.7-1) unstable; urgency=low
231 * Use different exit codes for different code parts, and quote
232 $ISO, thanks - Richard Hartmann!
233 * Remove unused configure lines in debian/rules.
235 -- Michael Prokop <mika@grml.org> Mon, 6 Nov 2006 23:48:46 +0100
237 grml2usb (0.6-1) unstable; urgency=low
239 * Allow overwriting of $TMPMNT.
241 -- Michael Prokop <mika@grml.org> Wed, 4 Oct 2006 22:50:58 +0200
243 grml2usb (0.5-1) unstable; urgency=low
245 * bailout if mounting of target device failes.
247 -- Michael Prokop <mika@grml.org> Mon, 11 Sep 2006 23:47:01 +0200
249 grml2usb (0.4-1) unstable; urgency=low
251 * Check for existence of syslinux before running the script.
252 * Updated copyright file (new fsfs address).
254 -- Michael Prokop <mika@grml.org> Sat, 3 Jun 2006 21:02:53 +0200
256 grml2usb (0.3-1) unstable; urgency=low
258 * Added uninstall option.
259 * Improved error handling and its output.
260 * Added colors to improve manual text parsing.
262 -- Michael Prokop <mika@grml.org> Fri, 10 Mar 2006 20:19:28 +0100
264 grml2usb (0.2-1) unstable; urgency=low
266 * Improved usage information.
268 -- Michael Prokop <mika@grml.org> Tue, 10 Jan 2006 09:35:20 +0100
270 grml2usb (0.1-3) unstable; urgency=low
272 * Changed 'cp -a' to 'cp -dR --preserve=mode,timestamps' so we don't
273 get the ownership-permission-warnings.
275 -- Michael Prokop <mika@grml.org> Fri, 2 Sep 2005 18:02:22 +0200
277 grml2usb (0.1-2) unstable; urgency=low
279 * Fixed small typo (SYSDEV/TMPDEV) [thanks for hint, tklauser!].
281 -- Michael Prokop <mika@grml.org> Wed, 17 Aug 2005 21:50:32 +0200
283 grml2usb (0.1-1) unstable; urgency=low
287 -- Michael Prokop <mika@grml.org> Sun, 14 Aug 2005 15:31:04 +0200