1 grml2usb (0.9.10) UNRELEASED; urgency=low
3 * Support the directory where the grml2usb script resides as base
4 directory so /usr/share/grml2usb isn't necessarily needed.
5 Thanks for the patch to Alexander 'Leo' Bergolth <leo@strike.wu.ac.at>!
6 * Make sure grub.conf isn't a symlink but a plain file instead,
7 otherwise it will break on FAT16 filesystems. This works around
8 grub-install of (at least) Fedora 10.
9 Thanks for the patch to Alexander 'Leo' Bergolth <leo@strike.wu.ac.at>!
10 * Use 'pci=nomsi' in failsafe bootoption. Thanks to Marc 'HE' Brockschmidt.
12 -- Michael Prokop <mika@grml.org> Mon, 07 Sep 2009 15:11:21 +0200
14 grml2usb (0.9.9) unstable; urgency=low
16 * Use ascii.pf2 as grub2 font, since grub2 (1.96+20090307-1)
17 the old ascii.pff isn't available anymore.
18 * Use terminal_output if available, otherwise fallback to old
19 older 'terminal'-command (thanks to Felix Zielcke for helping).
20 * Document the 'grub-setup fails after Attempting to install GRUB
21 to a partition instead of the MBR' issue.
22 * Use "set gfxpayload=1024x768x16,1024x768" instead of vga=791 in
23 grub2 configuration. This requires a recent version of the linux
24 loader as the new linux loader loads the kernel at 32bit entry point
25 and not at 16 bit anymore so it has to be translated for the Linux
26 kernel (as the kernel parses vga= in 16 bit code). In the long run
27 we don't seem to have another option, so let's change it.
28 Thanks to Felix Zielcke and Robert Millan for first hand information.
29 * Increase timeout from 5 to 10 seconds in grub2 configuration.
30 * Load memtest86+ binary via 'linux16' in grub2 (otherwise it fails).
31 * Drop the serial boot entry from grub2 (I assume users with usb
32 pens don't need that option).
33 * Change the way MirOS bsd4grml is loaded (use the fallback method
35 * Improve descriptions of grml's grub2 entries.
36 * Bump Standards-Version to 3.8.3 (no further changes).
37 * Fix creation and installation of grub1's configuration file (menu.lst).
38 Thanks to Mario 'BitKoenig' Holbe.
40 -- Michael Prokop <mika@grml.org> Tue, 25 Aug 2009 23:53:51 +0200
42 grml2usb (0.9.8) unstable; urgency=low
44 * Support installation on /dev/loop*-devices.
45 * Generate configuration for syslinux and grub by default, no
46 matter which bootloader the users chooses.
47 * Added options --skip-syslinux-config and --skip-grub-config
48 if someone wants to skip the generation of any bootloader
50 * Make sure grub-install is available before executing it.
51 * Display information about default grml flavour and the other
52 available grml flavours at the end of the grml2usb run.
53 * Use /sbin/blkid (e2fsprogs) instead of vol_id as vol_id is going to be
54 removed from udev. Thanks for the patch to Andras Korn!
55 * Use rsync instead of cp. Thanks for the patch to Andras Korn!
57 * Use 'forensic' and 'readonly' in the forensic bootoption itself.
58 * Spelling fixes (thanks to Thorsten Glaser <tg@mirbsd.org>).
59 * Write GRUB2 config even if the target is a directory (thanks, Thorsten)
60 * All these "set root=" are not needed for GRUB2 (thanks, Thorsten)
61 * Switch order of check whether the specified device is a directory
62 and check for usb device (as the usb device check will fail if
64 * Add grml2iso for creating a bootable DVD:
65 - thanks once more to Thorsten Glaser for helping and patches
66 - thanks to Ernesto Domato for reporting the issue regarding
67 i386<->amd64 with grub-mkimage
68 * Move syslinux check to install_syslinux_mbr()
69 * Drop the reference to --grub option (thanks for the bugreport
71 * Update documentation:
72 - mention the dd approach
74 - improve section link names for the online version
75 - add 'grub-probe: error: unknown filesystem'
76 * Support use with python version 2.4.
77 * Bump Standard Version to 3.8.2 (no further changes).
78 * Depend on debhelper >=5 (using compat version 5).
80 -- Michael Prokop <mika@grml.org> Tue, 21 Jul 2009 18:01:50 +0200
82 grml2usb (0.9.7) unstable; urgency=low
84 * Fix typo in manpage of grml2usb (thanks to Wernfried Haas).
85 * Fix bootoption toram: it should be toram=$FLAVOUR.squashfs instead
86 of toram=$FLAVOUR. Thanks to Wernfried Haas and Frank Prochnow
87 for the bugreport and debugging! [Closes: issue680]
89 -- Michael Prokop <mika@grml.org> Tue, 02 Jun 2009 23:32:13 +0200
91 grml2usb (0.9.6) unstable; urgency=low
93 * Support installation of the currently running grml live
94 system ("grml2usb /live/image /dev/sdx1").
95 * Add "persistent" entry to grub/syslinux menu. [Closes: issue669]
97 -- Michael Prokop <mika@grml.org> Wed, 20 May 2009 19:32:02 +0200
99 grml2usb (0.9.5) unstable; urgency=low
101 * Fix dashes of options in manpage (thanks for the bugreport,
103 * Display program version during execution.
104 * Apply fix by Peter Daum <gator@cs.tu-berlin.de>, making sure
105 to use the normalized path for unmounting. Thanks!
106 * Use 'multiboot' for booting MirOS BSD when using grub2.
107 * Catch exception if copying files fails.
108 * Make sure to exit if installing grub fails.
109 * Integrate hdt (Hardware Detection Tool) in bootsplash (but
110 only if using syslinux as grub isn't supported).
112 -- Michael Prokop <mika@grml.org> Mon, 04 May 2009 22:31:30 +0200
114 grml2usb (0.9.4) unstable; urgency=low
116 * Bugfix: move kernel commandline from initrd to kernel option in
117 generate_flavour_specific_grub2_config().
119 -- Michael Prokop <mika@grml.org> Thu, 09 Apr 2009 00:04:56 +0200
121 grml2usb (0.9.3) unstable; urgency=low
123 * Drop some leftover 'lang=us' references.
124 * Update mbr.S (thanks, Thorsten Glaser).
125 * Rename --mbr-manager into --mbr-menu (people seem to be confused
126 what this option does). Improve the according documentation.
127 * Update failsafe bootoption.
128 * Fix comments section in manpage (thanks for reporting,
129 Alexander Steinböck).
130 * Mention the Debian package in the error message (thanks to
131 Lothar Speil for the bugreport).
132 * Mention grml-repository in the docs.
133 * Support older kernel versions in check for removable usb device.
134 (Thanks to Ralf Gross for the report and relevant information.)
135 * Also add specified bootoptions to default entry in configuration
136 file of grub version 1. (Thanks to Ralf Gross for the bugreport.)
137 * Make sure that options "--quiet" and "--verbose" aren't accepted
138 at the same time in the command line. Thanks for bugreport and
139 code example, Karl Voit!
140 * Bump Standard Version to 3.8.1 (no further changes).
141 * Set debhelper's compat version from 4 to 5.
143 -- Michael Prokop <mika@grml.org> Wed, 08 Apr 2009 00:09:46 +0200
145 grml2usb (0.9.2) unstable; urgency=low
147 * Rewrote grml2usb from scratch (in python). New features:
148 - you no longer need to setup the device via /etc/fstab, just
149 directly invoke "grml2usb /path/to/iso /dev/sdb1"
150 - initial multi-iso / multi-boot support
151 [Closes: issue501] [Closes: issue584]
152 - provide *several* new options like --bootloader-only,
153 --bootoptions=... check out the manpage for all the details
154 - get rid of "polution" of root directory on usb-pen
156 - always write a default MBR (thanks a lot to the work
157 and help of Thorsten Glaser!) [Closes: issue295]
158 - use grub by default (but support for syslinux is present as
160 - fix regressions for temporary mountpoints / wrong directories
161 [Closes: issue603] [Closes: issue602]
162 * Update debian stuff:
163 - Bump Standard Version to 3.8.0 (no further changes)
164 - Change XS-Vcs-* to Vcs-* headers and replace mercurial with
165 grml's nowadays git repository URLs
166 - drop mtools from depends
167 - slightly improve long description
168 - add asciidoc, xsltproc and docbook-xsl to Build-Depends
169 - either depend on syslinux | grub2 | grub
171 -- Michael Prokop <mika@grml.org> Mon, 02 Mar 2009 16:40:55 +0100
173 grml2usb (0.9.1) unstable; urgency=low
175 * Fix problem with comment chars in /etc/fstab.
176 Thanks for debugging and the patch to Robert Euhus!
177 * Some minor cleanups in Debian packaging.
179 -- Michael Prokop <mika@grml.org> Sun, 25 May 2008 01:29:30 +0200
181 grml2usb (0.9.0) unstable; urgency=low
183 * Support new directory layout of different grml-flavours
184 * Fix uninstall option (really clean up usb device)
186 -- Michael Prokop <mika@grml.org> Sat, 23 Feb 2008 23:43:57 +0100
188 grml2usb (0.8.0) unstable; urgency=low
190 * Fix the "mv: cannot move `/mnt/usb-sdb1/boot/grub' to a subdirectory of
191 itself, `/mnt/usb-sdb1/grub'" issue.
193 -- Michael Prokop <mika@grml.org> Sat, 19 Jan 2008 16:57:08 +0100
195 grml2usb (0.7.8) unstable; urgency=low
197 * Adjust grml2usb for a present grub directory.
199 -- Michael Prokop <mika@grml.org> Fri, 16 Nov 2007 08:29:20 +0100
201 grml2usb (0.7.7) unstable; urgency=low
203 * Improve error handling for execution of syslinux.
205 -- Michael Prokop <mika@grml.org> Thu, 13 Sep 2007 01:38:31 +0200
207 grml2usb (0.7.6) unstable; urgency=low
209 * The "reworked grml2usb for JUXLALA"-release.
210 * Added fs check via vol_id.
211 * Improved error handling.
212 * Fixed some code parts regarding use of $TMPMNT.
214 -- Michael Prokop <mika@grml.org> Fri, 08 Jun 2007 18:07:09 +0200
216 grml2usb (0.7.5) unstable; urgency=low
218 * supporting directories and direct blockdevices as source for the iso.
220 -- Michael Gebetsroither <gebi@grml.org> Tue, 03 Apr 2007 23:28:19 +0200
222 grml2usb (0.7.4) unstable; urgency=low
224 * Get rid of bashism, thanks for reporting - Paul Weaver!
225 * Change version schema from x.y-z to x.y.z.
227 -- Michael Prokop <mika@grml.org> Fri, 16 Mar 2007 14:43:49 +0100
229 grml2usb (0.7-3) unstable; urgency=low
231 * The manpage was just a template, added the missing documentation
232 now. Thanks for reporting, Jens Heidrich!
234 -- Michael Prokop <mika@grml.org> Sat, 3 Feb 2007 11:08:30 +0100
236 grml2usb (0.7-2) unstable; urgency=low
238 * Use 'Architecture: all' in debian/control so we can use the
239 package on non-x86 as well.
240 * Bumb Standard Version to 3.7.2 (no further changes).
242 -- Michael Prokop <mika@grml.org> Sat, 11 Nov 2006 12:46:35 +0100
244 grml2usb (0.7-1) unstable; urgency=low
246 * Use different exit codes for different code parts, and quote
247 $ISO, thanks - Richard Hartmann!
248 * Remove unused configure lines in debian/rules.
250 -- Michael Prokop <mika@grml.org> Mon, 6 Nov 2006 23:48:46 +0100
252 grml2usb (0.6-1) unstable; urgency=low
254 * Allow overwriting of $TMPMNT.
256 -- Michael Prokop <mika@grml.org> Wed, 4 Oct 2006 22:50:58 +0200
258 grml2usb (0.5-1) unstable; urgency=low
260 * bailout if mounting of target device failes.
262 -- Michael Prokop <mika@grml.org> Mon, 11 Sep 2006 23:47:01 +0200
264 grml2usb (0.4-1) unstable; urgency=low
266 * Check for existence of syslinux before running the script.
267 * Updated copyright file (new fsfs address).
269 -- Michael Prokop <mika@grml.org> Sat, 3 Jun 2006 21:02:53 +0200
271 grml2usb (0.3-1) unstable; urgency=low
273 * Added uninstall option.
274 * Improved error handling and its output.
275 * Added colors to improve manual text parsing.
277 -- Michael Prokop <mika@grml.org> Fri, 10 Mar 2006 20:19:28 +0100
279 grml2usb (0.2-1) unstable; urgency=low
281 * Improved usage information.
283 -- Michael Prokop <mika@grml.org> Tue, 10 Jan 2006 09:35:20 +0100
285 grml2usb (0.1-3) unstable; urgency=low
287 * Changed 'cp -a' to 'cp -dR --preserve=mode,timestamps' so we don't
288 get the ownership-permission-warnings.
290 -- Michael Prokop <mika@grml.org> Fri, 2 Sep 2005 18:02:22 +0200
292 grml2usb (0.1-2) unstable; urgency=low
294 * Fixed small typo (SYSDEV/TMPDEV) [thanks for hint, tklauser!].
296 -- Michael Prokop <mika@grml.org> Wed, 17 Aug 2005 21:50:32 +0200
298 grml2usb (0.1-1) unstable; urgency=low
302 -- Michael Prokop <mika@grml.org> Sun, 14 Aug 2005 15:31:04 +0200