6 %!postproc(man): "^(\.TH.*) 1 " "\1 5 "
10 grmlzshrc - Grml's zsh setup
14 //zsh// [**options**]...
18 The Grml project provides a fairly exhaustive interactive setup (referred to
19 as //grmlzshrc// throughout this document) for the amazing unix shell zsh
20 (http://zsh.sourceforge.net). This is the reference manual for that
23 To use //grmlzshrc//, you need at least version 3.1.7 of zsh (although not all
24 features are enabled in every version).
26 //grmlzshrc// behaves differently depending on which user loads it. For the
27 root user (**EUID** == 0) only a subset of features is loaded by default. This
28 behaviour can be altered by setting the **GRML_ALWAYS_LOAD_ALL** STARTUP
31 Users may want to keep an up-to-date version of the setup (possibly from the
32 git-sources) in //~/.zshrc//. If that happens on a system where the global
33 zshrc is also a //grmlzshrc// (but possibly an older one), you can inhibit
34 loading the global version by doing:
37 echo setopt no_global_rcs >> ~/.zshenv
40 Note, that this will disable //ANY// global files, except for the global
44 Some of the behaviour of //grmlzshrc// can be altered by setting certain shell
45 variables. These may be set temporarily when starting zsh like this:
49 Or by setting them permanently in **zshrc.pre** (See AUXILIARY FILES below).
52 If set to a value greater than zero and //acpi// installed, //grmlzshrc// will
53 put the battery status into the right hand side interactive prompt.
55 : **COMMAND_NOT_FOUND**
56 A non zero value activates a handler, which is called when a command can not
57 be found. The handler is defined by GRML_ZSH_CNF_HANDLER (see below).
59 : **GRML_ALWAYS_LOAD_ALL**
60 Enables the whole Grml setup for root, if set to a non zero value.
62 : **GRML_ZSH_CNF_HANDLER**
63 This variable contains the handler to be used by COMMAND_NOT_FOUND (see above)
64 and defaults to "/usr/share/command-not-found/command-not-found".
66 : **GRMLSMALL_SPECIFIC**
67 Set this to zero to remove items in zsh config, which do not work in
71 Where zsh saves the history. Default: ${HOME}/.zsh_history.
74 Number of commands to be kept in the history. On a Grml-CD this defaults to
75 500, on a hard disk installation to 5000.
78 Sets the frequency in seconds for zsh to check for new mail. Defaults to 30.
79 A value of zero turns off checking.
82 Non zero values deactivate automatic correction of commands.
85 If set to zero (default), allows selection from a menu, if there are at least
86 five possible options of completion.
89 A non zero value disables precmd and preexec commands. These are functions
90 that are run before every command (setting xterm/screen titles etc.).
93 Show time (user, system and cpu) used by external commands, if they run longer
94 than the defined number of seconds (default: 5).
97 Number of commands to be stored in ${HISTFILE}. Defaults to 1000 on a Grml-CD
98 and to 10000 on an installation on hard disk.
101 As in tcsh(1) an array of login/logout events to be reported by the shell
102 builtin "log". For details see zshparam(1). Defaults to (notme root).
104 : **ZSH_NO_DEFAULT_LOCALE**
105 Import "/etc/default/locale", if set to zero (default).
108 A non zero value causes shell functions to be profiled. The results can be
109 obtained with the zprof builtin command (see zshmodules(1) for details).
112 = FEATURE DESCRIPTION =
113 This is an in depth description of non-standard features implemented by
116 == DIRSTACK HANDLING ==
117 The dirstack in //grmlzshrc// has a persistent nature. It is stored into a
118 file each time zsh's working directory is changed. That file can be configured
119 via the **DIRSTACKFILE** variable and it defaults to **~/.zdirs**. The
120 **DIRSTACKSIZE** variable defaults to **20** in this setup.
122 The **DIRSTACKFILE** is loaded each time zsh starts, therefore freshly started
123 zshs inherit the dirstack of the zsh that most recently updated
126 == DIRECTORY BASED PROFILES ==
127 If you want certain settings to be active in certain directories (and
128 automatically switch back and forth between them), this is what you want.
131 zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)' profile grml
132 zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian
135 When that's done and you enter a directory that matches the pattern
136 in the third part of the context, a function called chpwd_profile_grml,
137 for example, is called (if it exists).
139 If no pattern matches (read: no profile is detected) the profile is
140 set to 'default', which means chpwd_profile_default is attempted to
143 A word about the context (the ':chpwd:profiles:*' stuff in the zstyle
144 command) which is used: The third part in the context is matched against
145 **$PWD**. That's why using a pattern such as /foo/bar(|/|/*) makes sense.
146 Because that way the profile is detected for all these values of **$PWD**:
154 So, if you want to make double damn sure a profile works in /foo/bar
155 and everywhere deeper in that tree, just use (|/|/*) and be happy.
157 The name of the detected profile will be available in a variable called
158 'profile' in your functions. You don't need to do anything, it'll just
161 Then there is the parameter **$CHPWD_PROFILE** which is set to the profile,
162 that was active up to now. That way you can avoid running code for a
163 profile that is already active, by running code such as the following
164 at the start of your function:
167 function chpwd_profile_grml() {
168 [[ ${profile} == ${CHPWD_PROFILE} ]] && return 1
173 The initial value for **$CHPWD_PROFILE** is 'default'.
175 === Signaling availabily/profile changes ===
177 If you use this feature and need to know whether it is active in your
178 current shell, there are several ways to do that. Here are two simple
181 a) If knowing if the profiles feature is active when zsh starts is
182 good enough for you, you can put the following snippet into your
186 (( ${+functions[chpwd_profiles]} )) &&
187 print "directory profiles active"
190 b) If that is not good enough, and you would prefer to be notified
191 whenever a profile changes, you can solve that by making sure you
192 start **every** profile function you create like this:
195 function chpwd_profile_myprofilename() {
196 [[ ${profile} == ${CHPWD_PROFILE} ]] && return 1
197 print "chpwd(): Switching to profile: $profile"
202 That makes sure you only get notified if a profile is **changed**,
203 not everytime you change directory.
205 === Version requirement ===
206 This feature requires zsh //4.3.3// or newer.
209 == ACCEPTLINE WRAPPER ==
210 The //accept-line// wiget is the one that is taking action when the **return**
211 key is hit. //grmlzshrc// uses a wrapper around that widget, which adds new
214 This wrapper is configured via styles. That means, you issue commands, that look
218 zstyle 'context' style value
221 The context namespace, that we are using is 'acceptline'. That means, the actual
222 context for your commands look like: **':acceptline:<subcontext>'**.
224 Where **<subcontext>** is one of: **default**, **normal**, **force**, **misc**
228 === Recognized Contexts ===
230 This is the value, the context is initialized with.
231 The //compwarnfmt and //rehash// styles are looked up in this context.
234 If the first word in the command line is either a command, alias, function,
235 builtin or reserved word, you are in this context.
238 This is the context, that is used if you hit enter again, after being warned
239 about the existence of a _completion for the non-existing command you
243 This is the context, you are in if the command line is empty or only
244 consists of whitespace.
247 This context is in effect, if you entered something that does not match any
248 of the above. (e.g.: variable assignments).
251 === Available Styles ===
253 If you set this style to true, the warning about non existent commands,
254 for which completions exist will not be issued. (Default: **false**)
257 The message, that is displayed to warn about the _completion issue.
258 (default: **'%c will not execute and completion %f exists.'**)
259 '%c' is replaced by the command name, '%f' by the completion's name.
262 If this is set, we'll force rehashing, if appropriate. (Defaults to
263 **true** in //grmlzshrc//).
266 This can be a list of wigdets to call in a given context. If you need a
267 specific order for these to be called, name them accordingly. The default value
268 is an **empty list**.
271 The name of a widget, that is called after the widgets from 'actions'.
272 By default, this will be '.accept-line' (which is the built-in accept-line
276 If true in the current context, call the widget in the 'default_action'
277 style. (The default is **true** in all contexts.)
283 == GNU/SCREEN STATUS SETTING ==
284 //grmlzshrc// sets screen's hardstatus lines to the currently running command
285 or **'zsh'** if the shell is idling at its prompt. If the current working
286 directory is inside a repository unter version control, screen status is set
287 to: **'zsh: <repository name>'** via zsh's vcs_info.
290 == PERSISTENT HISTORY ==
291 If you got commands you consider important enough to be included in every
292 shell's history, you can put them into ~/.important_commands and they will be
293 available via the usual history lookup widgets.
297 == ENVIRONMENT VARIABLES ==
298 //grmlzshrc// sets some environment variables, which influence the
299 behaviour of applications.
302 Set to "yes". Some applications read this to learn about properties
303 of the terminal they are running in.
306 If not already set, sets the default editor. Falls back to vi(1),
307 if vim(1) is not available.
310 Some environment variables that add colour support to less(1) for viewing
311 man pages. See termcap(5) for details.
314 The mailbox file for the current user is set to /var/mail/$USER, if not
315 already set otherwise.
318 Set less(1) as default pager, if not already set to something different.
321 Holds the path to shared files for the C++ application framework QT
325 Set explicitly to /bin/zsh, to prevent certain terminal emulators to
326 default to /bin/sh or /bin/bash.
330 Apart from zsh's default options, //grmlzshrc// sets some options
331 that change the behaviour of zsh. Options that change Z-shell's default
332 settings are marked by <grml>. But note, that zsh's defaults vary depending
333 on its emulation mode (csh, ksh, sh, or zsh). For details, see zshoptions(1).
336 Zsh sessions, that use //grmlzshrc//, will append their history list to the
337 history file, rather than replace it. Thus, multiple parallel zsh sessions
338 will all have the new entries from their history lists added to the history
339 file, in the order that they exit. The file will still be periodically
340 re-written to trim it when the number of lines grows 20% beyond the value
341 specified by $SAVEHIST.
344 If a command is issued that can't be executed as a normal command, and the
345 command is the name of a directory, perform the cd command to that directory.
347 : **auto_pushd** <grml>
348 Make cd push the old directory onto the directory stack.
350 : **completeinword** <grml>
351 If the cursor is inside a word, completion is done from both ends;
352 instead of moving the cursor to the end of the word first and starting
355 : **extended_glob** <grml>
356 Treat the '#', '~' and '^' characters as active globbing pattern characters.
358 : **extended_history** <grml>
359 Save each command's beginning timestamp (in seconds since the epoch) and the
360 duration (in seconds) to the history file.
363 Whenever a command completion is attempted, make sure the entire command
364 path is hashed first. This makes the first completion slower.
366 : **histignorealldups** <grml>
367 If a new command line being added to the history list duplicates an
368 older one, the older command is removed from the list, even if it is
369 not the previous event.
371 : **histignorespace** <grml>
372 Remove command lines from the history list when the first character on
373 the line is a space, or when one of the expanded aliases contains a
374 leading space. Note that the command lingers in the internal history
375 until the next command is entered before it vanishes.
377 : **longlistjobs** <grml>
378 List jobs in long format by default.
381 Avoid to beep on errors in zsh command line editing (zle).
384 A wildcard character never matches a leading '.'.
387 Do not send the hangup signal (HUP:1) to running jobs when the shell exits.
389 : **nonomatch** <grml>
390 If a pattern for filename generation has no matches, do not print an error
391 and leave it unchanged in the argument list. This also applies to file
392 expansion of an initial `~' or `='.
395 Report the status of background jobs immediately, rather than waiting until
396 just before printing a prompt.
398 : **pushd_ignore_dups** <grml>
399 Don't push multiple copies of the same directory onto the directory stack.
401 : **share_history** <grml>
402 As each line is added to the history file, it is checked to see if anything
403 else was written out by another shell, and if so it is included in the
404 history of the current shell too. Using !-style history, the commands from
405 the other sessions will not appear in the history list unless you explicitly
406 type the "history" command. This option is activated for zsh versions >= 4,
411 Apart from zsh's default key bindings, //grmlzshrc// comes with its own set of
412 key bindings. Note that bindings like **ESC-e** can also be typed as **ALT-e**
416 Edit the current command buffer in your favourite editor.
419 Deletes a word left of the cursor; seeing '/' as additional word separator.
422 Jump right after the first word.
425 Create directory under cursor or the selected area.
426 To select an area press ctrl-@ and use the cursor.
427 Use case: you type "mv abc ~/testa/testb/testc/" and remember that the
428 directory does not exist yet -> press **CTRL-xM** and problem solved.
431 Searches the last occurence of string before the cursor in the command history.
434 Display help on keybindings and zsh line editor. Press consecutively to page through content.
437 Brings a job, which got suspended with CTRL-z back to foreground.
440 == SHELL FUNCTIONS ==
441 //grmlzshrc// comes with a wide array of defined shell functions to ease the
444 : **855resolution()**
445 If 915resolution is available, issues a warning to the user to run it instead
446 to modify the resolution on intel graphics chipsets.
449 Lists files in current directory, which have been accessed within the
450 last N days. N is an integer to be passed as first and only argument.
451 If no argument is specified N is set to 1.
454 Searches for USENET postings from authors using google groups.
457 Sets all ulimit values to "unlimited".
460 Lists processes matching given pattern.
462 : **aoeu(), asdf(), uiae()**
463 Pressing the 'asdf' keys toggles between dvorak or neon and us keyboard
466 : **apache2-ssl-certificate()**
467 Advices the user how to create self signed certificates.
470 Login on the host provided as argument using autossh. Then reattach a GNU screen
471 session if a detached session is around or detach a currently attached screen or
472 else start a new screen. This is especially useful for roadwarriors using GNU
476 Simple backup of a file or directory using cp(1). The target file name is the
477 original name plus a time stamp attached. Symlinks and file attributes like mode,
478 ownership and timestamps are preserved.
481 Runs a recursive diff(1) over two given directories trying to find the
482 smallest set of changes. Three lines of context will be printed and binary
486 If the original cdrecord is not installed, issues a warning to the user to
487 use the wodim binary instead. Wodim is the debian fork of Joerg Schillings
491 Creates a temporary directory using mktemp. Then changes current
492 working directory to it.
495 Lists files in current directory, which have been changed within the
496 last N days. N is an integer to be passed as first and only argument.
497 If no argument is specified N is set to 1.
500 Returns true if given command exists either as program, function, alias,
501 builtin or reserved word. If the option -c is given, only returns true,
502 if command is a program.
505 Changes directory to $HOME on first invocation of zsh. This is neccessary on
506 grml systems with autologin.
509 Changes current directory to the one supplied by argument and lists the files
510 in it, including file names starting with ".".
513 Adds and commits the given files using cvs(1). The commit message will be
517 Shows a cvs diff of the arguments in $PAGER.
520 Shows the cvs log in $PAGER.
526 Generates a changelog using rcs2log and shows it in $PAGER.
529 Shows cvs status of given files.
532 Shows the changelog of given package in $PAGER.
535 Searches the Debian bug tracking system (bugs.debian.org) for Bug numbers,
536 email addresses of submitters or any string given on the command line.
539 Shows bug report for debian given by number in mailbox format.
542 Tells the user to use grml-debootstrap, if she wants to install debian to
546 A trick from $LINUX-KERNELSOURCE/Documentation/power/swsusp.txt. It brings
547 back interactive responsiveness after suspend, when the system is swapping
551 Translates C source code to assembly and ouputs both.
554 Searches for the first argument (optional) in the Open Directory Project
555 (See http://www.dmoz.org/docs/en/about.html).
558 Shows the NEWS file for the given package in $PAGER.
561 Takes packagename as argument. Sets current working directory to
562 /usr/share/doc/<packagename> and prints out a directory listing.
565 Looks up the first argument (optional) in the german Wiktionary
566 which is an online dictionary (See: http://de.wiktionary.org/).
572 Edit given shell function.
575 Looks up the first argument (optional in the english Wiktionary
576 which is an online dictionary (See: http://en.wiktionary.org/).
579 Renames image files based on date/time informations in their exif headers.
582 Reloads an autoloadable shell function (See autoload in zshbuiltins(1)).
585 Fetches 3ware RAID controller software using get_3ware(1).
588 Performs an exact (i. e. quoted) web search using Google.
591 Searches the arguments on Google Groups, a web to USENET gateway.
594 Searches the search engine Google using arguments as search string.
597 Prints the hexadecimal representation of the number supplied as argument
601 Use GNU diff with options -ubwd for mercurial.
604 Displays diffstat between the revision given as argument and tip (no
605 argument means last revision).
608 Outputs highlighted diff; needs highstring(1).
611 Sets up an IPv6 tunnel on interface sit1. Needs one argument -
612 either "start", "stop" or "status".
615 Returns true, if zsh version is equal or greater than 4, else false.
618 Returns true, if zsh version is equal or greater than 4.1, else false.
621 Returns true, if zsh version is equal or greater than 4.2, else false.
624 Returns true, if zsh version is equal or greater than 4.2.5, else false.
627 Returns true, if zsh version is equal or greater than 4.3, else false.
630 Returns true, if zsh version is equal or greater than 4.3.3, else false.
633 Returns true, if running on darwin, else false.
636 Returns true, if running on a grml system, else false.
639 Returns true, if running on a grml system from a live cd, else false.
642 Returns true, if run on grml-small, else false.
645 Changes every occurrence of the string iso885915 or ISO885915 in
646 environment variables to UTF-8.
649 Returns true, if run within an utf environment, else false.
652 Searches a wireless interface and runs dhclient(8) on it.
655 Shows the zshall manpage and jumps to the first match of the regular
656 expression optionally given as argument (Needs qma(1)).
659 Creates directory including parent directories, if necessary. Then changes
660 current working directory to it.
663 Searches Google Groups for a USENET message-ID.
665 : **minimal-shell()**
666 Spawns a minimally set up MirBSD Korn shell. It references no files in /usr,
667 so that file system can be unmounted.
670 Lists files in current directory, which have been modified within the
671 last N days. N is an integer to be passed as first and only argument.
672 If no argument is specified N is set to 1.
675 Asks netcraft.com for informations about the site given as argument.
678 A helper function for the "e" glob qualifier to list all files newer
679 than a reference file.
683 % NTREF=/reference/file
686 % ls -l *(e:'nt /reference/file':)
690 Translates the given word using the english - german online
691 dictionary dict.leo.org.
694 Evaluates a perl expression; useful as command line
695 calculator, therefore also available as "calc".
698 Runs a command in $SHELL with profiling enabled (See startup variable
699 ZSH_PROFILE_RC above).
702 Reloads functions given as parameters.
705 Creates an alias whith sudo prepended, if $EUID is not zero. Run "salias -h"
706 for details. See also xunfunction() below.
709 Reimplementation of the csh(1) builtin setenv.
712 Lists the contents of a (compressed) archive with the appropriate programs.
713 The choice is made along the filename extension.
715 : **simple-extract()**
716 Tries to uncompress/unpack given files with the appropriate programs. If an URI
717 starting with https, http or ftp is provided simple-extract tries to download
718 and then uncompress/unpack the file. The choice is made along the filename
719 ending. simple-extract will not delete the original archive (even on .gz,.bz2 or
720 .xz) unless you use the '-d' option.
723 Prints details of symlinks given as arguments.
725 : **smartcompress()**
726 Compresses/archives the file given as first parameter. Takes an optional
727 second argument, which denotes the compression/archive type as typical
728 filename extension; defaults to "tar.gz".
731 Creates directory named shots in user's home directory, if it does not yet
732 exist and changes current working directory to it. Then sleeps 5 seconds,
733 so you have plenty of time to switch desktops/windows. Then makes a screenshot
734 of the current desktop. The result is stored in ~/shots to a timestamped
737 : **ssl-cert-fingerprints**
738 Prints the SHA512, SHA256, SHA1 and MD5 digest of a x509 certificate.
739 First and only parameter must be a file containing a certificate. Use
740 /dev/stdin as file if you want to pipe a certificate to these
744 Prints all information of a x509 certificate including the SHA512,
745 SHA256, SHA1 and MD5 digests. First and only parameter must be a file
746 containing a certificate. Use /dev/stdin as file if you want to pipe a
747 certificate to this function.
749 : **ssl-cert-sha512(), ssl-cert-sha256(), ssl-cert-sha1(), ssl-cert-md5()**
750 Prints the SHA512, SHA256, SHA1 respective MD5 digest of a x509
751 certificate. First and only parameter must be a file containing a
752 certificate. Use /dev/stdin as file if you want to pipe a certificate
755 : **Start(), Restart(), Stop(), Force-Reload(), Reload()**
756 Functions for controlling daemons.
763 Searches articles in the german Wikipedia for the term given as argument.
766 Translates a word from german to english (-D) or vice versa (-E).
769 Shows upstreams changelog of a given package in $PAGER.
772 Works around the "print -l ${(u)foo}"-limitation on zsh older than 4.2.
775 Changes every occurrence of the string UTF-8 or utf-8 in environment
776 variables to iso885915.
779 Wrapper for vim(1). It tries to set the title and hands vim the environment
780 variable VIM_OPTIONS on the command line. So the user may define command
781 line options, she always wants, in her .zshrc.local.
784 Searches the history for a given pattern and lists the results by date.
785 The first argument is the search pattern. The second and third ones are
786 optional and denote a search range (default: -100).
789 Looks up the argument on Wikipedia (german).
792 Looks up the argument on Wikipedia (english).
795 Searches the list of official debian packages for the term given as
796 first argument. The optional second argument denotes the distribution
797 (stable, testing or unstable) and defaults to unstable.
800 Tries to cat(1) file(s) given as parameter(s). Always returns true.
801 See also xunfunction() below.
804 Tries to source the file(s) given as parameter(s). Always returns true.
805 See zshbuiltins(1) for a detailed description of the source command.
806 See also xunfunction() below.
809 Changes the title of xterm window from within screen(1). Run without
810 arguments for details.
813 Removes the functions salias, xcat, xsource, xunfunction and zrcautoload.
816 Search for patterns in grml's zshrc using perl. zg takes no or exactly one
817 option plus a non empty pattern. Run zg without any arguments for a listing
818 of available command line switches. For a zshrc not in /etc/zsh, set the
819 GRML_ZSHRC environment variable.
822 Wrapper around the autoload builtin. Loads the definitions of functions
823 from the file given as argument. Searches $fpath for the file. See also
827 Sources /etc/zsh/zshrc.local and ${HOME}/.zshrc.local. These are the files
828 where own modifications should go. See also zshbuiltins(1) for a description
829 of the source command.
833 //grmlzshrc// comes with a wide array of predefined aliases to ease the user's
834 life. A few aliases (like those involving //grep// or //ls//) use the option
835 //--color=auto// for colourizing output. That option is part of **GNU**
836 implementations of these tools, and will only be used if such an implementation
839 : **acp** (//apt-cache policy//)
840 With no arguments prints out the priorities of each source. If a package name
841 is given, it displays detailed information about the priority selection of the
844 : **acs** (//apt-cache search//)
845 Searches debian package lists for the regular expression provided as argument.
846 The search includes package names and descriptions. Prints out name and short
847 description of matching packages.
849 : **acsh** (//apt-cache show//)
850 Shows the package records for the packages provided as arguments.
852 : **adg** (//apt-get dist-upgrade//)
853 Performs an upgrade of all installed packages. Also tries to automatically
854 handle changing dependencies with new versions of packages. As this may change
855 the install status of (or even remove) installed packages, it is potentially
856 dangerous to use dist-upgrade; invoked by sudo, if necessary.
858 : **ag** (//apt-get upgrade//)
859 Downloads and installs the newest versions of all packages currently installed
860 on the system. Under no circumstances are currently installed packages removed,
861 or packages not already installed retrieved and installed. New versions of
862 currently installed packages that cannot be upgraded without changing the install
863 status of another package will be left at their current version. An update must
864 be performed first (see au below); run by sudo, if necessary.
866 : **agi** (//apt-get install//)
867 Downloads and installs or upgrades the packages given on the command line.
868 If a hyphen is appended to the package name, the identified package will be
869 removed if it is installed. Similarly a plus sign can be used to designate a
870 package to install. This may be useful to override decisions made by apt-get's
871 conflict resolution system.
872 A specific version of a package can be selected for installation by following
873 the package name with an equals and the version of the package to select. This
874 will cause that version to be located and selected for install. Alternatively a
875 specific distribution can be selected by following the package name with a slash
876 and the version of the distribution or the Archive name (stable, testing, unstable).
877 Gets invoked by sudo, if user id is not 0.
879 : **ati** (//aptitude install//)
880 Aptitude is a terminal-based package manager with a command line mode similar to
881 apt-get (see agi above); invoked by sudo, if necessary.
883 : **au** (//apt-get update//)
884 Resynchronizes the package index files from their sources. The indexes of
885 available packages are fetched from the location(s) specified in
886 /etc/apt/sources.list. An update should always be performed before an
887 upgrade or dist-upgrade; run by sudo, if necessary.
889 : **calc** (//peval//)
890 Evaluates a perl expression (see peval() above); useful as a command line
893 : **CH** (//./configure --help//)
894 Lists available compilation options for building program from source.
896 : **cmplayer** (//mplayer -vo fbdev//)
897 Video player with framebuffer as video output device, so you can watch
898 videos on a virtual tty. Hint: Using fbdev2 allows you to use the shell
899 while watching a movie.
901 : **CO** (//./configure//)
902 Prepares compilation for building program from source.
904 : **cp** (//nocorrect cp//)
905 cp(1) without spelling correction.
907 : **da** (//du -sch//)
908 Prints the summarized disk usage of the arguments as well as a grand total
909 in human readable format.
911 : **dbp** (//dpkg-buildpackage//)
912 Builds binary or source packages from sources (See: dpkg-buildpackage(1)).
914 : **debs-by-size** (//grep-status -FStatus -sInstalled-Size,Package -n "install ok installed" | paste -sd " \n" | sort -rn//)
915 Prints installed Packages sorted by size (descending).
917 : **default** (//echo -en [ escape sequence ]//)
918 Sets font of xterm to "-misc-fixed-medium-r-normal-*-*-140-*-*-c-*-iso8859-15"
919 using escape sequence.
921 : **dir** (//ls -lSrah//)
922 Lists files (including dot files) sorted by size (biggest last) in long and
923 human readable output format.
925 : **fblinks** (//links2 -driver fb//)
926 A Web browser on the framebuffer device. So you can browse images and click
927 links on the virtual tty.
929 : **fbmplayer** (//mplayer -vo fbdev -fs -zoom//)
930 Fullscreen Video player with the framebuffer as video output device. So you
931 can watch videos on a virtual tty.
934 Revision control system by Linus Torvalds.
936 : **ge** (//grep-excuses//)
937 Searches the testing excuses files for a specific maintainer (See:
940 : **grep** (//grep --color=auto//)
941 Shows grep output in nice colors, if available.
943 : **GREP** (//grep -i --color=auto//)
944 Case insensitive grep with colored output.
946 : **grml-rebuildfstab** (//rebuildfstab -v -r -config//)
947 Scans for new devices and updates /etc/fstab according to the findings.
949 : **grml-version** (//cat /etc/grml_version//)
950 Prints version of running grml.
952 : **hbp** (//hg-buildpackage//)
953 Helper program to maintain Debian packages with mercurial.
955 : **http** (//python -m SimpleHTTPServer//)
956 Basic HTTP server implemented in python. Listens on port 8000/tcp and
957 serves current directory. Implements GET and HEAD methods.
959 : **insecscp** (//scp -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"//)
960 scp with possible man-in-the-middle attack enabled. This is convenient, if the targets
961 host key changes frequently, for example on virtualized test- or development-systems.
962 To be used only inside trusted networks, of course.
964 : **insecssh** (//ssh -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"//)
965 ssh with possible man-in-the-middle attack enabled
966 (for an explanation see insecscp above).
968 : **help-zshglob** (//H-Glob()//)
969 Runs the function H-Glob() to expand or explain wildcards.
971 : **hide** (//echo -en [ escape sequence ]//)
972 Tries to hide xterm window using escape sequence.
974 : **hidiff** (//histring -fE '^Comparing files .*|^diff .*' | histring -c yellow -fE '^\-.*' | histring -c green -fE '^\+.*'//)
975 If histring(1) is installed, highlight important stuff in diff(1) output.
977 : **huge** (//echo -en [ escape sequence ]//)
978 Sets huge font in xterm ("-misc-fixed-medium-r-normal-*-*-210-*-*-c-*-iso8859-15")
979 using escape sequence.
981 : **j** (//jobs -l//)
982 Prints status of jobs in the current shell session in long format.
984 : **l** (//ls -lF --color=auto//)
985 Lists files in long output format with indicator for filetype appended
986 to filename. If the terminal supports it, with colored output.
988 : **la** (//ls -la --color=auto//)
989 Lists files in long colored output format. Including file names
992 : **lad** (//ls -d .*(/)//)
993 Lists the dot directories (not their contents) in current directory.
995 : **large** (//echo -en [ escape sequence ]//)
996 Sets large font in xterm ("-misc-fixed-medium-r-normal-*-*-150-*-*-c-*-iso8859-15")
997 using escape sequence.
999 : **lh** (//ls -hAl --color=auto//)
1000 Lists files in long and human readable output format in nice colors,
1001 if available. Includes file names starting with "." except "." and
1004 : **ll** (//ls -l --color=auto//)
1005 Lists files in long colored output format.
1007 : **llog** (//$PAGER /var/log/syslog//)
1008 Opens syslog in pager.
1010 : **ls** (//ls -b -CF --color=auto//)
1011 Lists directory printing octal escapes for nongraphic characters.
1012 Entries are listed by columns and an indicator for file type is appended
1013 to each file name. Additionally the output is colored, if the terminal
1016 : **lsa** (//ls -a .*(.)//)
1017 Lists dot files in current working directory.
1019 : **lsbig** (//ls -flh *(.OL[1,10])//)
1020 Displays the ten biggest files (long and human readable output format).
1022 : **lsd** (//ls -d *(/)//)
1025 : **lse** (//ls -d *(/^F)//)
1026 Shows empty directories.
1028 : **lsl** (//ls -l *(@)//)
1029 Lists symbolic links in current directory.
1031 : **lsnew** (//ls -rl *(D.om[1,10])//)
1032 Displays the ten newest files (long output format).
1034 : **lsold** (//ls -rtlh *(D.om[1,10])//)
1035 Displays the ten oldest files (long output format).
1037 : **lss** (//ls -l *(s,S,t)//)
1038 Lists files in current directory that have the setuid, setgid or sticky bit
1041 : **lssmall** (//ls -Srl *(.oL[1,10])//)
1042 Displays the ten smallest files (long output format).
1044 : **lsw** (//ls -ld *(R,W,X.^ND/)//)
1045 Displays all files which are world readable and/or world writable and/or
1046 world executable (long output format).
1048 : **lsx** (//ls -l *(*)//)
1049 Lists only executable files.
1051 : **md** (//mkdir -p//)
1052 Creates directory including parent directories, if necessary
1054 : **mdstat** (//cat /proc/mdstat//)
1055 Lists all active md (i.e. linux software raid) devices with some information
1058 : **medium** (//echo -en [ escape sequence ]//)
1059 Sets medium sized font
1060 ("-misc-fixed-medium-r-normal--13-120-75-75-c-80-iso8859-15") in xterm
1061 using escape sequence.
1063 : **mkdir** (//nocorrect mkdir//)
1064 mkdir(1) without spelling correction.
1066 : **mq** (//hg -R $(readlink -f $(hg root)/.hg/patches)//)
1067 Executes the commands on the versioned patch queue from current repository.
1069 : **mv** (//nocorrect mv//)
1070 mv(1) without spelling correction.
1072 : **rd** (//rmdir//)
1073 Short rmdir(1) (remove directory).
1075 : **rm** (//nocorrect rm//)
1076 rm(1) without spelling correction.
1078 : **rmcdir** (//'cd ..; rmdir $OLDPWD || cd $OLDPWD//)
1079 rmdir current working directory
1081 : **screen** (///usr/bin/screen -c ${HOME}/.screenrc//)
1082 If invoking user is root, starts screen session with /etc/grml/screenrc
1083 as config file. If invoked by a regular user, start a screen session
1084 with users .screenrc config if it exists, else use /etc/grml/screenrc_grml
1087 : **rw-** (//chmod 600//)
1088 Grants read and write permission of a file to the owner and nobody else.
1090 : **rwx** (//chmod 700//)
1091 Grants read, write and execute permission of a file to the owner and nobody
1094 : **r--** (//chmod 644//)
1095 Grants read and write permission of a file to the owner and read-only to
1098 : **r-x** (//chmod 755//)
1099 Grants read, write and execute permission of a file to the owner and
1100 read-only plus execute permission to anybody else.
1102 : **S** (//screen//)
1103 Short for screen(1).
1108 : **semifont** (//echo -en [ escape sequence ]//)
1109 Sets font of xterm to
1110 "-misc-fixed-medium-r-semicondensed-*-*-120-*-*-*-*-iso8859-15" using
1113 : **small** (//echo -en [ escape sequence ]//)
1114 Sets small xterm font ("6x10") using escape sequence.
1116 : **smartfont** (//echo -en [ escape sequence ]//)
1117 Sets font of xterm to "-artwiz-smoothansi-*-*-*-*-*-*-*-*-*-*-*-*" using
1120 : **su** (//sudo su//)
1121 If user is running a grml live-CD, dont ask for any password, if she
1124 : **term2iso** (//echo 'Setting terminal to iso mode' ; print -n '\e%@'//)
1125 Sets mode from UTF-8 to ISO 2022 (See:
1126 http://www.cl.cam.ac.uk/~mgk25/unicode.html#term).
1128 : **term2utf** (//echo 'Setting terminal to utf-8 mode'; print -n '\e%G'//)
1129 Sets mode from ISO 2022 to UTF-8 (See:
1130 http://www.cl.cam.ac.uk/~mgk25/unicode.html#term).
1132 : **tiny** (//echo -en [ escape sequence ]//)
1133 Sets tiny xterm font
1134 ("-misc-fixed-medium-r-normal-*-*-80-*-*-c-*-iso8859-15") using escape
1137 : **tlog** (//tail -f /var/log/syslog//)
1138 Prints syslog continuously (See tail(1)).
1140 : **top10** (//print -l ? ${(o)history%% *} | uniq -c | sort -nr | head -n 10//)
1141 Prints the ten most used shell commands.
1143 : **truec** (//truecrypt [ mount options ]//)
1144 Mount a truecrypt volume with some reasonable mount options
1145 ("rw,sync,dirsync,users,uid=1000,gid=users,umask=077" and "utf8", if
1148 : **up** (//aptitude update ; aptitude safe-upgrade//)
1149 Performs a system update followed by a system upgrade using aptitude; run
1150 by sudo, if necessary. See au and ag above.
1152 : **url-quote** (//autoload -U url-quote-magic ; zle -N self-insert url-quote-magic//)
1153 After calling, characters of URLs as typed get automatically escaped, if necessary, to
1154 protect them from the shell.
1156 : **0** (//return 0//)
1157 Gives a clean prompt (i.e. without $?).
1159 : **$(uname -r)-reboot** (//kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)"//)
1160 Reboots using kexec(8) and thus reduces boot time by skipping hardware initialization of BIOS/firmware.
1162 : **...** (//cd ../..///)
1163 Changes current directory two levels higher.
1165 : **?** (//qma zshall//)
1166 Runs the grml script qma (quick manual access) to build the collected man
1167 pages for the z-shell. This compressed file is kept at
1168 ~/man/zshall.txt.lzo Once it is built, the second use of the alias '?' is
1169 fast. See "man qma" for further information.
1173 This is a set of files, that - if they exist - can be used to customize the
1174 behaviour of //grmlzshrc//.
1177 Sourced at the very beginning of //grmlzshrc//. Among other things, it can
1178 be used to permantenly change //grmlzshrc//'s STARTUP VARIABLES (see above):
1181 # show battery status in RPROMPT
1183 # always load the complete setup, even for root
1184 GRML_ALWAYS_LOAD_ALL=1
1188 Sourced right before loading //grmlzshrc// is finished. There is a global
1189 version of this file (/etc/zsh/zshrc.local) which is sourced before the
1193 Directory listing for persistent dirstack (see above).
1195 : **.important_commands**
1196 List of commands, used by persistent history (see above).
1199 = INSTALLATION ON NON-DEBIAN SYSTEMS =
1200 On Debian systems (http://www.debian.org) - and possibly Ubuntu
1201 (http://www.ubuntu.com) and similar systems - it is very easy to get
1202 //grmlzshrc// via grml's .deb repositories.
1204 On non-debian systems, that is not an option, but all is not lost:
1207 % wget -O .zshrc http://git.grml.org/f/grml-etc-core/etc/zsh/zshrc
1210 If you would also like to get seperate function files (which you can put into
1211 your **$fpath**), you can browse and download them at:
1213 http://git.grml.org/?p=grml-etc-core.git;a=tree;f=usr_share_grml/zsh;hb=HEAD
1215 = ZSH REFCARD TAGS =
1216 If you read //grmlzshrc//'s code you may notice strange looking comments in
1217 it. These are there for a purpose. grml's zsh-refcard is automatically
1218 generated from the contents of the actual configuration file. However, we need
1219 a little extra information on which comments and what lines of code to take
1220 into account (and for what purpose).
1222 Here is what they mean:
1224 List of tags (comment types) used:
1226 Next line contains an important alias, that should be included in the
1227 grml-zsh-refcard. (placement tag: @@INSERT-aliases@@)
1230 Next line contains the beginning of an important function. (placement
1231 tag: @@INSERT-functions@@)
1234 Next line contains an important variable. (placement tag:
1235 @@INSERT-variables@@)
1238 Next line contains an important keybinding. (placement tag:
1239 @@INSERT-keybindings@@)
1242 Hashed directories list generation: //start//: denotes the start of a list of
1243 'hash -d' definitions. //end//: denotes its end. (placement tag:
1244 @@INSERT-hasheddirs@@)
1247 Abbreviation expansion list generation: //start//: denotes the beginning of
1248 abbreviations. //end//: denotes their end.
1250 Lines within this section that end in '#d .*' provide extra documentation to
1251 be included in the refcard. (placement tag: @@INSERT-abbrev@@)
1254 This tag allows you to manually generate refcard entries for code lines that
1255 are hard/impossible to parse.
1259 #m# k ESC-h Call the run-help function
1262 That would add a refcard entry in the keybindings table for 'ESC-h' with the
1265 So the syntax is: #m# <section> <argument> <comment>
1268 This tag lets you insert entries to the 'other' hash. Generally, this should
1269 not be used. It is there for things that cannot be done easily in another way.
1270 (placement tag: @@INSERT-other-foobar@@)
1273 All of these tags (except for m and o) take two arguments, the first
1274 within the tag, the other after the tag:
1276 #<tag><section># <comment>
1278 Where <section> is really just a number, which are defined by the @secmap
1279 array on top of 'genrefcard.pl'. The reason for numbers instead of names is,
1280 that for the reader, the tag should not differ much from a regular comment.
1281 For zsh, it is a regular comment indeed. The numbers have got the following
1306 So, the following will add an entry to the 'functions' table in the 'system'
1307 section, with a (hopefully) descriptive comment:
1310 #f1# Edit an alias via zle
1314 It will then show up in the @@INSERT-aliases-system@@ replacement tag that can
1315 be found in 'grml-zsh-refcard.tex.in'. If the section number is omitted, the
1316 'default' section is assumed. Furthermore, in 'grml-zsh-refcard.tex.in'
1317 @@INSERT-aliases@@ is exactly the same as @@INSERT-aliases-default@@. If you
1318 want a list of **all** aliases, for example, use @@INSERT-aliases-all@@.
1322 If you want to help to improve grml's zsh setup, clone the grml-etc-core
1323 repository from git.grml.org:
1325 ``` % git clone git://git.grml.org/grml-etc-core.git
1327 Make your changes, commit them; use '**git format-patch**' to create a series
1328 of patches and send those to the following address via '**git send-email**':
1330 ``` grml-etc-core@grml.org
1332 Doing so makes sure the right people get your patches for review and
1337 This manual page is the **reference** manual for //grmlzshrc//.
1339 That means that in contrast to the existing refcard it should document **every**
1340 aspect of the setup.
1342 This manual is currently not complete. If you want to help improving it, visit
1343 the following pages:
1345 http://wiki.grml.org/doku.php?id=zshrcmanual
1347 http://lists.mur.at/pipermail/grml/2009-August/004609.html
1349 Contributions are highly welcome.
1353 This manpage was written by Frank Terbeck <ft@grml.org>, Joerg Woelke
1354 <joewoe@fsmail.de>, Maurice McCarthy <manselton@googlemail.com> and Axel
1355 Beckert <abe@deuxchevaux.org>.
1359 Copyright (c) 2009-2011 Grml project <http://grml.org>
1361 This manpage is distributed under the terms of the GPL version 2.
1363 Most parts of grml's zshrc are distributed under the terms of GPL v2, too,
1364 except for **accept-line()** which are distributed under the same conditions
1365 as zsh itself (which is BSD-like).