1 # Filename: /etc/zsh/zshrc
2 # Purpose: config file for zsh (z shell)
3 # Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
4 # Bug-Reports: see http://grml.org/bugs/
5 # License: This file is licensed under the GPL v2.
6 ################################################################################
7 # This file is sourced only for interactive shells. It
8 # should contain commands to set up aliases, functions,
9 # options, key bindings, etc.
11 # Global Order: zshenv, zprofile, zshrc, zlogin
12 ################################################################################
15 # If you are using this file as your ~/.zshrc file, please use ~/.zshrc.pre
16 # and ~/.zshrc.local for your own customisations. The former file is read
17 # before ~/.zshrc, the latter is read after it. Also, consider reading the
18 # refcard and the reference manual for this setup, both available from:
19 # <http://grml.org/zsh/>
22 # If you want to help to improve grml's zsh setup, clone the grml-etc-core
23 # repository from git.grml.org:
24 # git clone git://git.grml.org/grml-etc-core.git
26 # Make your changes, commit them; use 'git format-patch' to create a series
27 # of patches and send those to the following address via 'git send-email':
28 # grml-etc-core@grml.org
30 # Doing so makes sure the right people get your patches for review and
33 # zsh-refcard-tag documentation:
34 # You may notice strange looking comments in this file.
35 # These are there for a purpose. grml's zsh-refcard can now be
36 # automatically generated from the contents of the actual configuration
37 # file. However, we need a little extra information on which comments
38 # and what lines of code to take into account (and for what purpose).
40 # Here is what they mean:
42 # List of tags (comment types) used:
43 # #a# Next line contains an important alias, that should
44 # be included in the grml-zsh-refcard.
45 # (placement tag: @@INSERT-aliases@@)
46 # #f# Next line contains the beginning of an important function.
47 # (placement tag: @@INSERT-functions@@)
48 # #v# Next line contains an important variable.
49 # (placement tag: @@INSERT-variables@@)
50 # #k# Next line contains an important keybinding.
51 # (placement tag: @@INSERT-keybindings@@)
52 # #d# Hashed directories list generation:
53 # start denotes the start of a list of 'hash -d'
55 # end denotes its end.
56 # (placement tag: @@INSERT-hasheddirs@@)
57 # #A# Abbreviation expansion list generation:
58 # start denotes the beginning of abbreviations.
59 # end denotes their end.
60 # Lines within this section that end in '#d .*' provide
61 # extra documentation to be included in the refcard.
62 # (placement tag: @@INSERT-abbrev@@)
63 # #m# This tag allows you to manually generate refcard entries
64 # for code lines that are hard/impossible to parse.
66 # #m# k ESC-h Call the run-help function
67 # That would add a refcard entry in the keybindings table
68 # for 'ESC-h' with the given comment.
69 # So the syntax is: #m# <section> <argument> <comment>
70 # #o# This tag lets you insert entries to the 'other' hash.
71 # Generally, this should not be used. It is there for
72 # things that cannot be done easily in another way.
73 # (placement tag: @@INSERT-other-foobar@@)
75 # All of these tags (except for m and o) take two arguments, the first
76 # within the tag, the other after the tag:
78 # #<tag><section># <comment>
80 # Where <section> is really just a number, which are defined by the
81 # @secmap array on top of 'genrefcard.pl'. The reason for numbers
82 # instead of names is, that for the reader, the tag should not differ
83 # much from a regular comment. For zsh, it is a regular comment indeed.
84 # The numbers have got the following meanings:
93 # So, the following will add an entry to the 'functions' table in the
94 # 'system' section, with a (hopefully) descriptive comment:
95 # #f1# Edit an alias via zle
98 # It will then show up in the @@INSERT-aliases-system@@ replacement tag
99 # that can be found in 'grml-zsh-refcard.tex.in'.
100 # If the section number is omitted, the 'default' section is assumed.
101 # Furthermore, in 'grml-zsh-refcard.tex.in' @@INSERT-aliases@@ is
102 # exactly the same as @@INSERT-aliases-default@@. If you want a list of
103 # *all* aliases, for example, use @@INSERT-aliases-all@@.
106 # just execute 'ZSH_PROFILE_RC=1 zsh' and run 'zprof' to get the details
107 if [[ $ZSH_PROFILE_RC -gt 0 ]] ; then
111 typeset -A GRML_STATUS_FEATURES
113 function grml_status_feature () {
117 if (( success == 0 )); then
118 GRML_STATUS_FEATURES[$f]=success
120 GRML_STATUS_FEATURES[$f]=failure
125 function grml_status_features () {
129 if [[ $mode == -h ]] || [[ $mode == --help ]]; then
131 grml_status_features [-h|--help|-|+|+-|FEATURE]
133 Prints a summary of features the grml setup is trying to load. The
134 result of loading a feature is recorded. This function lets you query
137 The function takes one argument: "-h" or "--help" to display this help
138 text, "+" to display a list of all successfully loaded features, "-" for
139 a list of all features that failed to load. "+-" to show a list of all
140 features with their statuses.
142 Any other word is considered to by a feature and prints its status.
144 The default mode is "+-".
148 if [[ $mode != - ]] && [[ $mode != + ]] && [[ $mode != +- ]]; then
149 this="${GRML_STATUS_FEATURES[$mode]}"
150 if [[ -z $this ]]; then
158 for key in ${(ok)GRML_STATUS_FEATURES}; do
159 this="${GRML_STATUS_FEATURES[$key]}"
160 if [[ $this == success ]] && [[ $mode == *+* ]]; then
161 printf '%-16s %s\n' $key $this
163 if [[ $this == failure ]] && [[ $mode == *-* ]]; then
164 printf '%-16s %s\n' $key $this
170 # load .zshrc.pre to give the user the chance to overwrite the defaults
171 [[ -r ${ZDOTDIR:-${HOME}}/.zshrc.pre ]] && source ${ZDOTDIR:-${HOME}}/.zshrc.pre
173 # check for version/system
174 # check for versions (compatibility reasons)
176 [[ $ZSH_VERSION == 5.<1->* ]] && return 0
181 [[ $ZSH_VERSION == <4->* ]] && return 0
186 [[ $ZSH_VERSION == 4.<1->* || $ZSH_VERSION == <5->* ]] && return 0
191 [[ $ZSH_VERSION == 4.<2->* || $ZSH_VERSION == <5->* ]] && return 0
196 [[ $ZSH_VERSION == 4.2.<5->* || $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0
201 [[ $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0
206 [[ $ZSH_VERSION == 4.3.<3->* || $ZSH_VERSION == 4.<4->* \
207 || $ZSH_VERSION == <5->* ]] && return 0
212 [[ $ZSH_VERSION == 4.3.<7->* || $ZSH_VERSION == 4.<4->* \
213 || $ZSH_VERSION == <5->* ]] && return 0
218 [[ $ZSH_VERSION == 4.3.<9->* || $ZSH_VERSION == 4.<4->* \
219 || $ZSH_VERSION == <5->* ]] && return 0
223 #f1# Checks whether or not you're running grml
225 [[ -f /etc/grml_version ]] && return 0
229 #f1# Checks whether or not you're running a grml cd
230 function isgrmlcd () {
231 [[ -f /etc/grml_cd ]] && return 0
236 #f1# Checks whether or not you're running grml-small
237 function isgrmlsmall () {
238 if [[ ${${${(f)"$(</etc/grml_version)"}%% *}##*-} == 'small' ]]; then
244 function isgrmlsmall () { return 1 }
247 GRML_OSTYPE=$(uname -s)
249 function islinux () {
250 [[ $GRML_OSTYPE == "Linux" ]]
253 function isdarwin () {
254 [[ $GRML_OSTYPE == "Darwin" ]]
257 function isfreebsd () {
258 [[ $GRML_OSTYPE == "FreeBSD" ]]
261 function isopenbsd () {
262 [[ $GRML_OSTYPE == "OpenBSD" ]]
265 function issolaris () {
266 [[ $GRML_OSTYPE == "SunOS" ]]
269 #f1# are we running within an utf environment?
270 function isutfenv () {
271 case "$LANG $CHARSET $LANGUAGE" in
278 # check for user, if not running as root set $SUDO to sudo
279 (( EUID != 0 )) && SUDO='sudo' || SUDO=''
281 # change directory to home on first invocation of zsh
282 # important for rungetty -> autologin
283 # Thanks go to Bart Schaefer!
284 isgrml && function checkhome () {
285 if [[ -z "$ALREADY_DID_CD_HOME" ]] ; then
286 export ALREADY_DID_CD_HOME=$HOME
291 # check for zsh v3.1.7+
293 if ! [[ ${ZSH_VERSION} == 3.1.<7->* \
294 || ${ZSH_VERSION} == 3.<2->.<->* \
295 || ${ZSH_VERSION} == <4->.<->* ]] ; then
298 printf '-!- In this configuration we try to make use of features, that only\n'
299 printf '-!- require version 3.1.7 of the shell; That way this setup can be\n'
300 printf '-!- used with a wide range of zsh versions, while using fairly\n'
301 printf '-!- advanced features in all supported versions.\n'
303 printf '-!- However, you are running zsh version %s.\n' "$ZSH_VERSION"
305 printf '-!- While this *may* work, it might as well fail.\n'
306 printf '-!- Please consider updating to at least version 3.1.7 of zsh.\n'
308 printf '-!- DO NOT EXPECT THIS TO WORK FLAWLESSLY!\n'
309 printf '-!- If it does today, you'\''ve been lucky.\n'
311 printf '-!- Ye been warned!\n'
314 function zstyle () { : }
317 # autoload wrapper - use this one instead of autoload directly
318 # We need to define this function as early as this, because autoloading
319 # 'is-at-least()' needs it.
320 function zrcautoload () {
328 for fdir in ${fpath} ; do
329 [[ -e ${fdir}/${ffile} ]] && (( ffound = 1 ))
332 (( ffound == 0 )) && return 1
333 if [[ $ZSH_VERSION == 3.1.<6-> || $ZSH_VERSION == <4->* ]] ; then
334 autoload -U ${ffile} || return 1
336 autoload ${ffile} || return 1
341 # The following is the ‘add-zsh-hook’ function from zsh upstream. It is
342 # included here to make the setup work with older versions of zsh (prior to
343 # 4.3.7) in which this function had a bug that triggers annoying errors during
344 # shell startup. This is exactly upstreams code from f0068edb4888a4d8fe94def,
345 # with just a few adjustments in coding style to make the function look more
346 # compact. This definition can be removed as soon as we raise the minimum
347 # version requirement to 4.3.7 or newer.
348 function add-zsh-hook () {
349 # Add to HOOK the given FUNCTION.
350 # HOOK is one of chpwd, precmd, preexec, periodic, zshaddhistory,
351 # zshexit, zsh_directory_name (the _functions subscript is not required).
353 # With -d, remove the function from the hook instead; delete the hook
354 # variable if it is empty.
356 # -D behaves like -d, but pattern characters are active in the function
357 # name, so any matching function will be deleted from the hook.
359 # Without -d, the FUNCTION is marked for autoload; -U is passed down to
360 # autoload if that is given, as are -z and -k. (This is harmless if the
361 # function is actually defined inline.)
365 chpwd precmd preexec periodic zshaddhistory zshexit
368 local usage="Usage: $0 hook function\nValid hooks are:\n $hooktypes"
371 integer del list help
372 while getopts "dDhLUzk" opt; do
378 ([Uzk]) autoopts+=(-$opt) ;;
382 shift $(( OPTIND - 1 ))
384 typeset -mp "(${1:-${(@j:|:)hooktypes}})_functions"
386 elif (( help || $# != 2 || ${hooktypes[(I)$1]} == 0 )); then
387 print -u$(( 2 - help )) $usage
388 return $(( 1 - help ))
390 local hook="${1}_functions"
393 # delete, if hook is set
394 if (( ${(P)+hook} )); then
395 if (( del == 2 )); then
396 set -A $hook ${(P)hook:#${~fn}}
398 set -A $hook ${(P)hook:#$fn}
400 # unset if no remaining entries --- this can give better
401 # performance in some cases
402 if (( ! ${(P)#hook} )); then
407 if (( ${(P)+hook} )); then
408 if (( ${${(P)hook}[(I)$fn]} == 0 )); then
409 set -A $hook ${(P)hook} $fn
414 autoload $autoopts -- $fn
418 # Load is-at-least() for more precise version checks Note that this test will
419 # *always* fail, if the is-at-least function could not be marked for
421 zrcautoload is-at-least || function is-at-least () { return 1 }
423 # set some important options (as early as possible)
425 # append history list to the history file; this is the default but we make sure
426 # because it's required for share_history.
427 setopt append_history
429 # import new commands from the history file also in other zsh-session
430 is4 && setopt share_history
432 # save each command's beginning timestamp and the duration to the history file
433 setopt extended_history
435 # remove command lines from the history list when the first character on the
437 setopt histignorespace
439 # if a command is issued that can't be executed as a normal command, and the
440 # command is the name of a directory, perform the cd command to that directory.
443 # in order to use #, ~ and ^ for filename generation grep word
444 # *~(*.gz|*.bz|*.bz2|*.zip|*.Z) -> searches for word not in compressed files
445 # don't forget to quote '^', '~' and '#'!
448 # display PID when suspending processes as well
451 # report the status of backgrounds jobs immediately
454 # whenever a command completion is attempted, make sure the entire command path
458 # not just at the end
459 setopt completeinword
461 # Don't send SIGHUP to background processes when the shell exits.
464 # make cd push the old directory onto the directory stack.
470 # don't push the same dir twice.
471 setopt pushd_ignore_dups
473 # * shouldn't match dotfiles. ever.
476 # use zsh style word splitting
479 # don't error out when unset parameters are used
482 # setting some default values
485 NOPRECMD=${NOPRECMD:-0}
486 COMMAND_NOT_FOUND=${COMMAND_NOT_FOUND:-0}
487 GRML_ZSH_CNF_HANDLER=${GRML_ZSH_CNF_HANDLER:-/usr/share/command-not-found/command-not-found}
488 GRML_DISPLAY_BATTERY=${GRML_DISPLAY_BATTERY:-${BATTERY:-0}}
489 GRMLSMALL_SPECIFIC=${GRMLSMALL_SPECIFIC:-1}
490 ZSH_NO_DEFAULT_LOCALE=${ZSH_NO_DEFAULT_LOCALE:-0}
492 typeset -ga ls_options
493 typeset -ga grep_options
495 # Colors on GNU ls(1)
496 if ls --color=auto / >/dev/null 2>&1; then
497 ls_options+=( --color=auto )
498 # Colors on FreeBSD and OSX ls(1)
499 elif ls -G / >/dev/null 2>&1; then
503 # Natural sorting order on GNU ls(1)
504 # OSX and IllumOS have a -v option that is not natural sorting
505 if ls --version |& grep -q 'GNU' >/dev/null 2>&1 && ls -v / >/dev/null 2>&1; then
509 # Color on GNU and FreeBSD grep(1)
510 if grep --color=auto -q "a" <<< "a" >/dev/null 2>&1; then
511 grep_options+=( --color=auto )
515 # this function checks if a command exists and returns either true
516 # or false. This avoids using 'which' and 'whence', which will
517 # avoid problems with aliases for which on certain weird systems. :-)
518 # Usage: check_com [-c|-g] word
519 # -c only checks for external commands
520 # -g does the usual tests and also checks for global aliases
521 function check_com () {
523 local -i comonly gatoo
527 if [[ $1 == '-c' ]] ; then
530 elif [[ $1 == '-g' ]] ; then
535 if (( ${#argv} != 1 )) ; then
536 printf 'usage: check_com [-c|-g] <command>\n' >&2
540 if (( comonly > 0 )) ; then
541 (( ${+commands[$1]} )) && return 0
545 if (( ${+commands[$1]} )) \
546 || (( ${+functions[$1]} )) \
547 || (( ${+aliases[$1]} )) \
548 || (( ${+reswords[(r)$1]} )) ; then
552 if (( gatoo > 0 )) && (( ${+galiases[$1]} )) ; then
559 # creates an alias and precedes the command with
560 # sudo if $EUID is not zero.
563 local only=0 ; local multi=0
565 while getopts ":hao" opt; do
570 printf 'usage: salias [-hoa] <alias-expression>\n'
571 printf ' -h shows this help text.\n'
572 printf ' -a replace '\'' ; '\'' sequences with '\'' ; sudo '\''.\n'
573 printf ' be careful using this option.\n'
574 printf ' -o only sets an alias if a preceding sudo would be needed.\n'
577 *) salias -h >&2; return 1 ;;
580 shift "$((OPTIND-1))"
582 if (( ${#argv} > 1 )) ; then
583 printf 'Too many arguments %s\n' "${#argv}"
587 key="${1%%\=*}" ; val="${1#*\=}"
588 if (( EUID == 0 )) && (( only == 0 )); then
589 alias -- "${key}=${val}"
590 elif (( EUID > 0 )) ; then
591 (( multi > 0 )) && val="${val// ; / ; sudo }"
592 alias -- "${key}=sudo ${val}"
598 # Check if we can read given files and source those we can.
599 function xsource () {
600 if (( ${#argv} < 1 )) ; then
601 printf 'usage: xsource FILE(s)...\n' >&2
605 while (( ${#argv} > 0 )) ; do
606 [[ -r "$1" ]] && source "$1"
612 # Check if we can read a given file and 'cat(1)' it.
615 if (( ${#argv} != 1 )) ; then
616 printf 'usage: xcat FILE\n' >&2
620 [[ -r $1 ]] && cat $1
624 # Remove these functions again, they are of use only in these
625 # setup files. This should be called at the end of .zshrc.
626 function xunfunction () {
630 funcs=(salias xcat xsource xunfunction zrcautoload zrcautozle)
631 for func in $funcs ; do
632 [[ -n ${functions[$func]} ]] \
638 # this allows us to stay in sync with grml's zshrc and put own
639 # modifications in ~/.zshrc.local
640 function zrclocal () {
641 xsource "/etc/zsh/zshrc.local"
642 xsource "${ZDOTDIR:-${HOME}}/.zshrc.local"
647 if (( ZSH_NO_DEFAULT_LOCALE == 0 )); then
648 xsource "/etc/default/locale"
651 for var in LANG LC_ALL LC_MESSAGES ; do
652 [[ -n ${(P)var} ]] && export $var
657 if check_com -c vim ; then
659 export EDITOR=${EDITOR:-vim}
661 export EDITOR=${EDITOR:-vi}
665 export PAGER=${PAGER:-less}
668 export MAIL=${MAIL:-/var/mail/$USER}
670 # color setup for ls:
671 check_com -c dircolors && eval $(dircolors -b)
672 # color setup for ls on OS X / FreeBSD:
673 isdarwin && export CLICOLOR=1
674 isfreebsd && export CLICOLOR=1
676 # do MacPorts setup on darwin
677 if isdarwin && [[ -d /opt/local ]]; then
678 # Note: PATH gets set in /etc/zprofile on Darwin, so this can't go into
680 PATH="/opt/local/bin:/opt/local/sbin:$PATH"
681 MANPATH="/opt/local/share/man:$MANPATH"
683 # do Fink setup on darwin
684 isdarwin && xsource /sw/bin/init.sh
686 # load our function and completion directories
687 for fdir in /usr/share/grml/zsh/completion /usr/share/grml/zsh/functions; do
688 fpath=( ${fdir} ${fdir}/**/*(/N) ${fpath} )
691 ffiles=(/usr/share/grml/zsh/functions/**/[^_]*[^~](N.:t))
692 (( ${#ffiles} > 0 )) && autoload -U "${ffiles[@]}"
695 # support colors in less
696 export LESS_TERMCAP_mb=$'\E[01;31m'
697 export LESS_TERMCAP_md=$'\E[01;31m'
698 export LESS_TERMCAP_me=$'\E[0m'
699 export LESS_TERMCAP_se=$'\E[0m'
700 export LESS_TERMCAP_so=$'\E[01;44;33m'
701 export LESS_TERMCAP_ue=$'\E[0m'
702 export LESS_TERMCAP_us=$'\E[01;32m'
707 # report about cpu-/system-/user-time of command if running longer than
711 # watch for everyone but me and root
714 # automatically remove duplicates from these arrays
715 typeset -U path PATH cdpath CDPATH fpath FPATH manpath MANPATH
719 for mod in parameter complist deltochar mathfunc ; do
720 zmodload -i zsh/${mod} 2>/dev/null
721 grml_status_feature mod:$mod $?
722 done && builtin unset -v mod
724 # autoload zsh modules when they are referenced
726 zmodload -a zsh/stat zstat
727 zmodload -a zsh/zpty zpty
728 zmodload -ap zsh/mapfile mapfile
732 COMPDUMPFILE=${COMPDUMPFILE:-${ZDOTDIR:-${HOME}}/.zcompdump}
733 if zrcautoload compinit ; then
735 zstyle -a ':grml:completion:compinit' arguments tmp
736 compinit -d ${COMPDUMPFILE} "${tmp[@]}"
737 grml_status_feature compinit $?
740 grml_status_feature compinit 1
746 # called later (via is4 && grmlcomp)
747 # note: use 'zstyle' for getting current settings
748 # press ^xh (control-x h) for getting tags in context; ^x? (control-x ?) to run complete_debug with trace output
749 function grmlcomp () {
750 # TODO: This could use some additional information
752 # Make sure the completion system is initialised
753 (( ${+_comps} )) || return 1
755 # allow one error for every three characters typed in approximate completer
756 zstyle ':completion:*:approximate:' max-errors 'reply=( $((($#PREFIX+$#SUFFIX)/3 )) numeric )'
758 # don't complete backup files as executables
759 zstyle ':completion:*:complete:-command-::commands' ignored-patterns '(aptitude-*|*\~)'
761 # start menu completion only if it could find no unambiguous initial string
762 zstyle ':completion:*:correct:*' insert-unambiguous true
763 zstyle ':completion:*:corrections' format $'%{\e[0;31m%}%d (errors: %e)%{\e[0m%}'
764 zstyle ':completion:*:correct:*' original true
766 # activate color-completion
767 zstyle ':completion:*:default' list-colors ${(s.:.)LS_COLORS}
769 # format on completion
770 zstyle ':completion:*:descriptions' format $'%{\e[0;31m%}completing %B%d%b%{\e[0m%}'
772 # automatically complete 'cd -<tab>' and 'cd -<ctrl-d>' with menu
773 # zstyle ':completion:*:*:cd:*:directory-stack' menu yes select
775 # insert all expansions for expand completer
776 zstyle ':completion:*:expand:*' tag-order all-expansions
777 zstyle ':completion:*:history-words' list false
780 zstyle ':completion:*:history-words' menu yes
782 # ignore duplicate entries
783 zstyle ':completion:*:history-words' remove-all-dups yes
784 zstyle ':completion:*:history-words' stop yes
786 # match uppercase from lowercase
787 zstyle ':completion:*' matcher-list 'm:{a-z}={A-Z}'
789 # separate matches into groups
790 zstyle ':completion:*:matches' group 'yes'
791 zstyle ':completion:*' group-name ''
793 if [[ "$NOMENU" -eq 0 ]] ; then
794 # if there are more than 5 options allow selecting from a menu
795 zstyle ':completion:*' menu select=5
797 # don't use any menus at all
801 zstyle ':completion:*:messages' format '%d'
802 zstyle ':completion:*:options' auto-description '%d'
804 # describe options in full
805 zstyle ':completion:*:options' description 'yes'
807 # on processes completion complete all user processes
808 zstyle ':completion:*:processes' command 'ps -au$USER'
810 # offer indexes before parameters in subscripts
811 zstyle ':completion:*:*:-subscript-:*' tag-order indexes parameters
813 # provide verbose completion information
814 zstyle ':completion:*' verbose true
816 # recent (as of Dec 2007) zsh versions are able to provide descriptions
817 # for commands (read: 1st word in the line) that it will list for the user
818 # to choose from. The following disables that, because it's not exactly fast.
819 zstyle ':completion:*:-command-:*:' verbose false
821 # set format for warnings
822 zstyle ':completion:*:warnings' format $'%{\e[0;31m%}No matches for:%{\e[0m%} %d'
824 # define files to ignore for zcompile
825 zstyle ':completion:*:*:zcompile:*' ignored-patterns '(*~|*.zwc)'
826 zstyle ':completion:correct:' prompt 'correct to: %e'
828 # Ignore completion functions for commands you don't have:
829 zstyle ':completion::(^approximate*):*:functions' ignored-patterns '_*'
831 # Provide more processes in completion of programs like killall:
832 zstyle ':completion:*:processes-names' command 'ps c -u ${USER} -o command | uniq'
834 # complete manual by their section
835 zstyle ':completion:*:manuals' separate-sections true
836 zstyle ':completion:*:manuals.*' insert-sections true
837 zstyle ':completion:*:man:*' menu yes select
839 # Search path for sudo completion
840 zstyle ':completion:*:sudo:*' command-path /usr/local/sbin \
848 # provide .. as a completion
849 zstyle ':completion:*' special-dirs ..
851 # run rehash on completion so new installed program are found automatically:
852 function _force_rehash () {
853 (( CURRENT == 1 )) && rehash
858 # some people don't like the automatic correction - so run 'NOCOR=1 zsh' to deactivate it
859 if [[ "$NOCOR" -gt 0 ]] ; then
860 zstyle ':completion:*' completer _oldlist _expand _force_rehash _complete _files _ignored
863 # try to be smart about when to use what completer...
865 zstyle -e ':completion:*' completer '
866 if [[ $_last_try != "$HISTNO$BUFFER$CURSOR" ]] ; then
867 _last_try="$HISTNO$BUFFER$CURSOR"
868 reply=(_complete _match _ignored _prefix _files)
870 if [[ $words[1] == (rm|mv) ]] ; then
871 reply=(_complete _files)
873 reply=(_oldlist _expand _force_rehash _complete _ignored _correct _approximate _files)
878 # command for process lists, the local web server details and host completion
879 zstyle ':completion:*:urls' local 'www' '/var/www/' 'public_html'
881 # Some functions, like _apt and _dpkg, are very slow. We can use a cache in
882 # order to speed things up
883 if [[ ${GRML_COMP_CACHING:-yes} == yes ]]; then
884 GRML_COMP_CACHE_DIR=${GRML_COMP_CACHE_DIR:-${ZDOTDIR:-$HOME}/.cache}
885 if [[ ! -d ${GRML_COMP_CACHE_DIR} ]]; then
886 command mkdir -p "${GRML_COMP_CACHE_DIR}"
888 zstyle ':completion:*' use-cache yes
889 zstyle ':completion:*:complete:*' cache-path "${GRML_COMP_CACHE_DIR}"
894 [[ -r ~/.ssh/config ]] && _ssh_config_hosts=(${${(s: :)${(ps:\t:)${${(@M)${(f)"$(<$HOME/.ssh/config)"}:#Host *}#Host }}}:#*[*?]*}) || _ssh_config_hosts=()
895 [[ -r ~/.ssh/known_hosts ]] && _ssh_hosts=(${${${${(f)"$(<$HOME/.ssh/known_hosts)"}:#[\|]*}%%\ *}%%,*}) || _ssh_hosts=()
896 [[ -r /etc/hosts ]] && : ${(A)_etc_hosts:=${(s: :)${(ps:\t:)${${(f)~~"$(</etc/hosts)"}%%\#*}##[:blank:]#[^[:blank:]]#}}} || _etc_hosts=()
904 localname="$(uname -n)"
907 "$_ssh_config_hosts[@]"
912 zstyle ':completion:*:hosts' hosts $hosts
913 # TODO: so, why is this here?
914 # zstyle '*' hosts $hosts
916 # use generic completion system for programs not yet defined; (_gnu_generic works
917 # with commands that provide a --help option with "standard" gnu-like output.)
918 for compcom in cp deborphan df feh fetchipac gpasswd head hnb ipacsum mv \
920 [[ -z ${_comps[$compcom]} ]] && compdef _gnu_generic ${compcom}
923 # see upgrade function in this file
924 compdef _hosts upgrade
927 # Keyboard setup: The following is based on the same code, we wrote for
928 # debian's setup. It ensures the terminal is in the right mode, when zle is
929 # active, so the values from $terminfo are valid. Therefore, this setup should
930 # work on all systems, that have support for `terminfo'. It also requires the
931 # zsh in use to have the `zsh/terminfo' module built.
933 # If you are customising your `zle-line-init()' or `zle-line-finish()'
934 # functions, make sure you call the following utility functions in there:
936 # - zle-line-init(): zle-smkx
937 # - zle-line-finish(): zle-rmkx
939 # Use emacs-like key bindings by default:
944 ## beginning-of-line OR beginning-of-buffer OR beginning of history
945 ## by: Bart Schaefer <schaefer@brasslantern.com>, Bernhard Tittelbach
946 function beginning-or-end-of-somewhere () {
948 if [[ ( "${LBUFFER[-1]}" == $'\n' && "${WIDGET}" == beginning-of* ) || \
949 ( "${RBUFFER[1]}" == $'\n' && "${WIDGET}" == end-of* ) ]]; then
950 zle .${WIDGET:s/somewhere/buffer-or-history/} "$@"
952 zle .${WIDGET:s/somewhere/line-hist/} "$@"
953 if (( HISTNO != hno )); then
954 zle .${WIDGET:s/somewhere/buffer-or-history/} "$@"
958 zle -N beginning-of-somewhere beginning-or-end-of-somewhere
959 zle -N end-of-somewhere beginning-or-end-of-somewhere
961 # add a command line to the shells history without executing it
962 function commit-to-history () {
963 print -rs ${(z)BUFFER}
966 zle -N commit-to-history
968 # only slash should be considered as a word separator:
969 function slash-backward-kill-word () {
970 local WORDCHARS="${WORDCHARS:s@/@}"
972 zle backward-kill-word
974 zle -N slash-backward-kill-word
976 # a generic accept-line wrapper
978 # This widget can prevent unwanted autocorrections from command-name
979 # to _command-name, rehash automatically on enter and call any number
980 # of builtin and user-defined widgets in different contexts.
982 # For a broader description, see:
983 # <http://bewatermyfriend.org/posts/2007/12-26.11-50-38-tooltime.html>
985 # The code is imported from the file 'zsh/functions/accept-line' from
986 # <http://ft.bewatermyfriend.org/comp/zsh/zsh-dotfiles.tar.bz2>, which
987 # distributed under the same terms as zsh itself.
989 # A newly added command will may not be found or will cause false
990 # correction attempts, if you got auto-correction set. By setting the
991 # following style, we force accept-line() to rehash, if it cannot
992 # find the first word on the command line in the $command[] hash.
993 zstyle ':acceptline:*' rehash true
995 function Accept-Line () {
996 setopt localoptions noksharrays
1000 local alcontext=${1:-$alcontext}
1002 zstyle -a ":acceptline:${alcontext}" actions subs
1004 (( ${#subs} < 1 )) && return 0
1007 for sub in ${subs} ; do
1008 [[ ${sub} == 'accept-line' ]] && sub='.accept-line'
1011 (( aldone > 0 )) && break
1015 function Accept-Line-getdefault () {
1017 local default_action
1019 zstyle -s ":acceptline:${alcontext}" default_action default_action
1020 case ${default_action} in
1022 printf ".accept-line"
1025 printf ${default_action}
1030 function Accept-Line-HandleContext () {
1033 default_action=$(Accept-Line-getdefault)
1034 zstyle -T ":acceptline:${alcontext}" call_default \
1035 && zle ${default_action}
1038 function accept-line () {
1039 setopt localoptions noksharrays
1042 local buf com fname format msg default_action
1046 cmdline=(${(z)BUFFER})
1050 Accept-Line 'preprocess'
1052 zstyle -t ":acceptline:${alcontext}" rehash \
1053 && [[ -z ${commands[$com]} ]] \
1056 if [[ -n ${com} ]] \
1057 && [[ -n ${reswords[(r)$com]} ]] \
1058 || [[ -n ${aliases[$com]} ]] \
1059 || [[ -n ${functions[$com]} ]] \
1060 || [[ -n ${builtins[$com]} ]] \
1061 || [[ -n ${commands[$com]} ]] ; then
1063 # there is something sensible to execute, just do it.
1065 Accept-Line-HandleContext
1070 if [[ -o correct ]] \
1071 || [[ -o correctall ]] \
1072 && [[ -n ${functions[$fname]} ]] ; then
1074 # nothing there to execute but there is a function called
1075 # _command_name; a completion widget. Makes no sense to
1076 # call it on the commandline, but the correct{,all} options
1077 # will ask for it nevertheless, so warn the user.
1078 if [[ ${LASTWIDGET} == 'accept-line' ]] ; then
1079 # Okay, we warned the user before, he called us again,
1080 # so have it his way.
1082 Accept-Line-HandleContext
1087 if zstyle -t ":acceptline:${alcontext}" nocompwarn ; then
1089 Accept-Line-HandleContext
1091 # prepare warning message for the user, configurable via zstyle.
1092 zstyle -s ":acceptline:${alcontext}" compwarnfmt msg
1094 if [[ -z ${msg} ]] ; then
1095 msg="%c will not execute and completion %f exists."
1098 zformat -f msg "${msg}" "c:${com}" "f:${fname}"
1103 elif [[ -n ${buf//[$' \t\n']##/} ]] ; then
1104 # If we are here, the commandline contains something that is not
1105 # executable, which is neither subject to _command_name correction
1106 # and is not empty. might be a variable assignment
1108 Accept-Line-HandleContext
1113 # If we got this far, the commandline only contains whitespace, or is empty.
1115 Accept-Line-HandleContext
1120 zle -N Accept-Line-HandleContext
1122 # power completion / abbreviation expansion / buffer expansion
1123 # see http://zshwiki.org/home/examples/zleiab for details
1124 # less risky than the global aliases but powerful as well
1125 # just type the abbreviation key and afterwards 'ctrl-x .' to expand it
1128 setopt interactivecomments
1130 # key # value (#d additional doc string)
1136 'G' '|& grep '${grep_options:+"${grep_options[*]}"}
1138 'Hl' ' --help |& less -r' #d (Display help in pager)
1142 'N' '&>/dev/null' #d (No Output)
1143 'R' '| tr A-z N-za-m' #d (ROT13)
1144 'SL' '| sort | less'
1149 'co' './configure && make && sudo make install'
1152 function zleiab () {
1157 LBUFFER=${LBUFFER%%(#m)[.\-+:|_a-zA-Z0-9]#}
1158 LBUFFER+=${abk[$MATCH]:-$MATCH}
1163 function help-show-abk () {
1164 zle -M "$(print "Available abbreviations for expansion:"; print -a -C 2 ${(kv)abk})"
1167 zle -N help-show-abk
1169 # press "ctrl-x d" to insert the actual date in the form yyyy-mm-dd
1170 function insert-datestamp () { LBUFFER+=${(%):-'%D{%Y-%m-%d}'}; }
1171 zle -N insert-datestamp
1173 # press esc-m for inserting last typed word again (thanks to caphuso!)
1174 function insert-last-typed-word () { zle insert-last-word -- 0 -1 };
1175 zle -N insert-last-typed-word;
1177 function grml-zsh-fg () {
1178 if (( ${#jobstates} )); then
1180 [[ -o hist_ignore_space ]] && BUFFER=' ' || BUFFER=''
1181 BUFFER="${BUFFER}fg"
1184 zle -M 'No background jobs. Doing nothing.'
1189 # run command line as user root via sudo:
1190 function sudo-command-line () {
1191 [[ -z $BUFFER ]] && zle up-history
1193 if [[ ${BUFFER} == ${cmd}* ]]; then
1194 CURSOR=$(( CURSOR-${#cmd} ))
1195 BUFFER="${BUFFER#$cmd}"
1197 BUFFER="${cmd}${BUFFER}"
1198 CURSOR=$(( CURSOR+${#cmd} ))
1202 zle -N sudo-command-line
1204 ### jump behind the first word on the cmdline.
1205 ### useful to add options.
1206 function jump_after_first_word () {
1208 words=(${(z)BUFFER})
1210 if (( ${#words} <= 1 )) ; then
1213 CURSOR=${#${words[1]}}
1216 zle -N jump_after_first_word
1218 #f5# Create directory under cursor or the selected area
1219 function inplaceMkDirs () {
1220 # Press ctrl-xM to create the directory under the cursor or the selected area.
1221 # To select an area press ctrl-@ or ctrl-space and use the cursor.
1222 # Use case: you type "mv abc ~/testa/testb/testc/" and remember that the
1223 # directory does not exist yet -> press ctrl-XM and problem solved
1225 if ((REGION_ACTIVE==1)); then
1226 local F=$MARK T=$CURSOR
1227 if [[ $F -gt $T ]]; then
1231 # get marked area from buffer and eliminate whitespace
1232 PATHTOMKDIR=${BUFFER[F+1,T]%%[[:space:]]##}
1233 PATHTOMKDIR=${PATHTOMKDIR##[[:space:]]##}
1235 local bufwords iword
1236 bufwords=(${(z)LBUFFER})
1238 bufwords=(${(z)BUFFER})
1239 PATHTOMKDIR="${(Q)bufwords[iword]}"
1241 [[ -z "${PATHTOMKDIR}" ]] && return 1
1242 PATHTOMKDIR=${~PATHTOMKDIR}
1243 if [[ -e "${PATHTOMKDIR}" ]]; then
1244 zle -M " path already exists, doing nothing"
1246 zle -M "$(mkdir -p -v "${PATHTOMKDIR}")"
1251 zle -N inplaceMkDirs
1253 #v1# set number of lines to display per page
1254 HELP_LINES_PER_PAGE=20
1255 #v1# set location of help-zle cache file
1256 HELP_ZLE_CACHE_FILE=~/.cache/zsh_help_zle_lines.zsh
1257 # helper function for help-zle, actually generates the help text
1258 function help_zle_parse_keybindings () {
1261 unsetopt ksharrays #indexing starts at 1
1263 #v1# choose files that help-zle will parse for keybindings
1264 ((${+HELPZLE_KEYBINDING_FILES})) || HELPZLE_KEYBINDING_FILES=( /etc/zsh/zshrc ~/.zshrc.pre ~/.zshrc ~/.zshrc.local )
1266 if [[ -r $HELP_ZLE_CACHE_FILE ]]; then
1269 for f ($HELPZLE_KEYBINDING_FILES) [[ $f -nt $HELP_ZLE_CACHE_FILE ]] && load_cache=1
1270 [[ $load_cache -eq 0 ]] && . $HELP_ZLE_CACHE_FILE && return
1273 #fill with default keybindings, possibly to be overwritten in a file later
1274 #Note that due to zsh inconsistency on escaping assoc array keys, we encase the key in '' which we will remove later
1275 local -A help_zle_keybindings
1276 help_zle_keybindings['<Ctrl>@']="set MARK"
1277 help_zle_keybindings['<Ctrl>x<Ctrl>j']="vi-join lines"
1278 help_zle_keybindings['<Ctrl>x<Ctrl>b']="jump to matching brace"
1279 help_zle_keybindings['<Ctrl>x<Ctrl>u']="undo"
1280 help_zle_keybindings['<Ctrl>_']="undo"
1281 help_zle_keybindings['<Ctrl>x<Ctrl>f<c>']="find <c> in cmdline"
1282 help_zle_keybindings['<Ctrl>a']="goto beginning of line"
1283 help_zle_keybindings['<Ctrl>e']="goto end of line"
1284 help_zle_keybindings['<Ctrl>t']="transpose charaters"
1285 help_zle_keybindings['<Alt>t']="transpose words"
1286 help_zle_keybindings['<Alt>s']="spellcheck word"
1287 help_zle_keybindings['<Ctrl>k']="backward kill buffer"
1288 help_zle_keybindings['<Ctrl>u']="forward kill buffer"
1289 help_zle_keybindings['<Ctrl>y']="insert previously killed word/string"
1290 help_zle_keybindings["<Alt>'"]="quote line"
1291 help_zle_keybindings['<Alt>"']="quote from mark to cursor"
1292 help_zle_keybindings['<Alt><arg>']="repeat next cmd/char <arg> times (<Alt>-<Alt>1<Alt>0a -> -10 times 'a')"
1293 help_zle_keybindings['<Alt>u']="make next word Uppercase"
1294 help_zle_keybindings['<Alt>l']="make next word lowercase"
1295 help_zle_keybindings['<Ctrl>xG']="preview expansion under cursor"
1296 help_zle_keybindings['<Alt>q']="push current CL into background, freeing it. Restore on next CL"
1297 help_zle_keybindings['<Alt>.']="insert (and interate through) last word from prev CLs"
1298 help_zle_keybindings['<Alt>,']="complete word from newer history (consecutive hits)"
1299 help_zle_keybindings['<Alt>m']="repeat last typed word on current CL"
1300 help_zle_keybindings['<Ctrl>v']="insert next keypress symbol literally (e.g. for bindkey)"
1301 help_zle_keybindings['!!:n*<Tab>']="insert last n arguments of last command"
1302 help_zle_keybindings['!!:n-<Tab>']="insert arguments n..N-2 of last command (e.g. mv s s d)"
1303 help_zle_keybindings['<Alt>h']="show help/manpage for current command"
1305 #init global variables
1306 unset help_zle_lines help_zle_sln
1307 typeset -g -a help_zle_lines
1308 typeset -g help_zle_sln=1
1311 local lastkeybind_desc contents #last description starting with #k# that we found
1312 local num_lines_elapsed=0 #number of lines between last description and keybinding
1313 #search config files in the order they a called (and thus the order in which they overwrite keybindings)
1314 for f in $HELPZLE_KEYBINDING_FILES; do
1315 [[ -r "$f" ]] || continue #not readable ? skip it
1317 for cline in "${(f)contents}"; do
1318 #zsh pattern: matches lines like: #k# ..............
1319 if [[ "$cline" == (#s)[[:space:]]#\#k\#[[:space:]]##(#b)(*)[[:space:]]#(#e) ]]; then
1320 lastkeybind_desc="$match[*]"
1322 #zsh pattern: matches lines that set a keybinding using bind2map, bindkey or compdef -k
1323 # ignores lines that are commentend out
1324 # grabs first in '' or "" enclosed string with length between 1 and 6 characters
1325 elif [[ "$cline" == [^#]#(bind2maps[[:space:]](*)-s|bindkey|compdef -k)[[:space:]](*)(#b)(\"((?)(#c1,6))\"|\'((?)(#c1,6))\')(#B)(*) ]]; then
1326 #description previously found ? description not more than 2 lines away ? keybinding not empty ?
1327 if [[ -n $lastkeybind_desc && $num_lines_elapsed -lt 2 && -n $match[1] ]]; then
1328 #substitute keybinding string with something readable
1329 k=${${${${${${${match[1]/\\e\^h/<Alt><BS>}/\\e\^\?/<Alt><BS>}/\\e\[5~/<PageUp>}/\\e\[6~/<PageDown>}//(\\e|\^\[)/<Alt>}//\^/<Ctrl>}/3~/<Alt><Del>}
1330 #put keybinding in assoc array, possibly overwriting defaults or stuff found in earlier files
1331 #Note that we are extracting the keybinding-string including the quotes (see Note at beginning)
1332 help_zle_keybindings[${k}]=$lastkeybind_desc
1336 ((num_lines_elapsed++))
1341 #calculate length of keybinding column
1343 for k (${(k)help_zle_keybindings[@]}) ((kstrlen < ${#k})) && kstrlen=${#k}
1344 #convert the assoc array into preformated lines, which we are able to sort
1345 for k v in ${(kv)help_zle_keybindings[@]}; do
1346 #pad keybinding-string to kstrlen chars and remove outermost characters (i.e. the quotes)
1347 help_zle_lines+=("${(r:kstrlen:)k[2,-2]}${v}")
1349 #sort lines alphabetically
1350 help_zle_lines=("${(i)help_zle_lines[@]}")
1351 [[ -d ${HELP_ZLE_CACHE_FILE:h} ]] || mkdir -p "${HELP_ZLE_CACHE_FILE:h}"
1352 echo "help_zle_lines=(${(q)help_zle_lines[@]})" >| $HELP_ZLE_CACHE_FILE
1353 zcompile $HELP_ZLE_CACHE_FILE
1355 typeset -g help_zle_sln
1356 typeset -g -a help_zle_lines
1358 # Provides (partially autogenerated) help on keybindings and the zsh line editor
1359 function help-zle () {
1361 unsetopt ksharrays #indexing starts at 1
1362 #help lines already generated ? no ? then do it
1363 [[ ${+functions[help_zle_parse_keybindings]} -eq 1 ]] && {help_zle_parse_keybindings && unfunction help_zle_parse_keybindings}
1364 #already displayed all lines ? go back to the start
1365 [[ $help_zle_sln -gt ${#help_zle_lines} ]] && help_zle_sln=1
1366 local sln=$help_zle_sln
1367 #note that help_zle_sln is a global var, meaning we remember the last page we viewed
1368 help_zle_sln=$((help_zle_sln + HELP_LINES_PER_PAGE))
1369 zle -M "${(F)help_zle_lines[sln,help_zle_sln-1]}"
1373 ## complete word from currently visible Screen or Tmux buffer.
1374 if check_com -c screen || check_com -c tmux; then
1375 function _complete_screen_display () {
1376 [[ "$TERM" != "screen" ]] && return 1
1378 local TMPFILE=$(mktemp)
1379 local -U -a _screen_display_wordlist
1380 trap "rm -f $TMPFILE" EXIT
1382 # fill array with contents from screen hardcopy
1383 if ((${+TMUX})); then
1384 #works, but crashes tmux below version 1.4
1385 #luckily tmux -V option to ask for version, was also added in 1.4
1386 tmux -V &>/dev/null || return
1387 tmux -q capture-pane \; save-buffer -b 0 $TMPFILE \; delete-buffer -b 0
1389 screen -X hardcopy $TMPFILE
1390 # screen sucks, it dumps in latin1, apparently always. so recode it
1392 check_com recode && recode latin1 $TMPFILE
1394 _screen_display_wordlist=( ${(QQ)$(<$TMPFILE)} )
1395 # remove PREFIX to be completed from that array
1396 _screen_display_wordlist[${_screen_display_wordlist[(i)$PREFIX]}]=""
1397 compadd -a _screen_display_wordlist
1399 #m# k CTRL-x\,\,\,S Complete word from GNU screen buffer
1401 compdef -k _complete_screen_display complete-word '^xS'
1404 # Load a few more functions and tie them to widgets, so they can be bound:
1406 function zrcautozle () {
1409 zrcautoload $fnc && zle -N $fnc
1412 function zrcgotwidget () {
1413 (( ${+widgets[$1]} ))
1416 function zrcgotkeymap () {
1417 [[ -n ${(M)keymaps:#$1} ]]
1420 zrcautozle insert-files
1421 zrcautozle edit-command-line
1422 zrcautozle insert-unicode-char
1423 if zrcautoload history-search-end; then
1424 zle -N history-beginning-search-backward-end history-search-end
1425 zle -N history-beginning-search-forward-end history-search-end
1427 zle -C hist-complete complete-word _generic
1428 zstyle ':completion:hist-complete:*' completer _history
1430 # The actual terminal setup hooks and bindkey-calls:
1432 # An array to note missing features to ease diagnosis in case of problems.
1433 typeset -ga grml_missing_features
1435 function zrcbindkey () {
1436 if (( ARGC )) && zrcgotwidget ${argv[-1]}; then
1441 function bind2maps () {
1442 local i sequence widget
1445 while [[ "$1" != "--" ]]; do
1451 if [[ "$1" == "-s" ]]; then
1455 sequence="${key[$1]}"
1459 [[ -z "$sequence" ]] && return 1
1461 for i in "${maps[@]}"; do
1462 zrcbindkey -M "$i" "$sequence" "$widget"
1466 if (( ${+terminfo[smkx]} )) && (( ${+terminfo[rmkx]} )); then
1467 function zle-smkx () {
1469 printf '%s' ${terminfo[smkx]}
1471 function zle-rmkx () {
1473 printf '%s' ${terminfo[rmkx]}
1475 function zle-line-init () {
1478 function zle-line-finish () {
1481 zle -N zle-line-init
1482 zle -N zle-line-finish
1484 for i in {s,r}mkx; do
1485 (( ${+terminfo[$i]} )) || grml_missing_features+=($i)
1492 Home "${terminfo[khome]}"
1493 End "${terminfo[kend]}"
1494 Insert "${terminfo[kich1]}"
1495 Delete "${terminfo[kdch1]}"
1496 Up "${terminfo[kcuu1]}"
1497 Down "${terminfo[kcud1]}"
1498 Left "${terminfo[kcub1]}"
1499 Right "${terminfo[kcuf1]}"
1500 PageUp "${terminfo[kpp]}"
1501 PageDown "${terminfo[knp]}"
1502 BackTab "${terminfo[kcbt]}"
1505 # Guidelines for adding key bindings:
1507 # - Do not add hardcoded escape sequences, to enable non standard key
1508 # combinations such as Ctrl-Meta-Left-Cursor. They are not easily portable.
1510 # - Adding Ctrl characters, such as '^b' is okay; note that '^b' and '^B' are
1513 # - All keys from the $key[] mapping are obviously okay.
1515 # - Most terminals send "ESC x" when Meta-x is pressed. Thus, sequences like
1516 # '\ex' are allowed in here as well.
1518 bind2maps emacs -- Home beginning-of-somewhere
1519 bind2maps viins vicmd -- Home vi-beginning-of-line
1520 bind2maps emacs -- End end-of-somewhere
1521 bind2maps viins vicmd -- End vi-end-of-line
1522 bind2maps emacs viins -- Insert overwrite-mode
1523 bind2maps vicmd -- Insert vi-insert
1524 bind2maps emacs -- Delete delete-char
1525 bind2maps viins vicmd -- Delete vi-delete-char
1526 bind2maps emacs viins vicmd -- Up up-line-or-search
1527 bind2maps emacs viins vicmd -- Down down-line-or-search
1528 bind2maps emacs -- Left backward-char
1529 bind2maps viins vicmd -- Left vi-backward-char
1530 bind2maps emacs -- Right forward-char
1531 bind2maps viins vicmd -- Right vi-forward-char
1532 #k# Perform abbreviation expansion
1533 bind2maps emacs viins -- -s '^x.' zleiab
1534 #k# Display list of abbreviations that would expand
1535 bind2maps emacs viins -- -s '^xb' help-show-abk
1536 #k# mkdir -p <dir> from string under cursor or marked area
1537 bind2maps emacs viins -- -s '^xM' inplaceMkDirs
1538 #k# display help for keybindings and ZLE
1539 bind2maps emacs viins -- -s '^xz' help-zle
1540 #k# Insert files and test globbing
1541 bind2maps emacs viins -- -s "^xf" insert-files
1542 #k# Edit the current line in \kbd{\$EDITOR}
1543 bind2maps emacs viins -- -s '\ee' edit-command-line
1544 #k# search history backward for entry beginning with typed text
1545 bind2maps emacs viins -- -s '^xp' history-beginning-search-backward-end
1546 #k# search history forward for entry beginning with typed text
1547 bind2maps emacs viins -- -s '^xP' history-beginning-search-forward-end
1548 #k# search history backward for entry beginning with typed text
1549 bind2maps emacs viins -- PageUp history-beginning-search-backward-end
1550 #k# search history forward for entry beginning with typed text
1551 bind2maps emacs viins -- PageDown history-beginning-search-forward-end
1552 bind2maps emacs viins -- -s "^x^h" commit-to-history
1553 #k# Kill left-side word or everything up to next slash
1554 bind2maps emacs viins -- -s '\ev' slash-backward-kill-word
1555 #k# Kill left-side word or everything up to next slash
1556 bind2maps emacs viins -- -s '\e^h' slash-backward-kill-word
1557 #k# Kill left-side word or everything up to next slash
1558 bind2maps emacs viins -- -s '\e^?' slash-backward-kill-word
1559 # Do history expansion on space:
1560 bind2maps emacs viins -- -s ' ' magic-space
1561 #k# Trigger menu-complete
1562 bind2maps emacs viins -- -s '\ei' menu-complete # menu completion via esc-i
1563 #k# Insert a timestamp on the command line (yyyy-mm-dd)
1564 bind2maps emacs viins -- -s '^xd' insert-datestamp
1565 #k# Insert last typed word
1566 bind2maps emacs viins -- -s "\em" insert-last-typed-word
1567 #k# A smart shortcut for \kbd{fg<enter>}
1568 bind2maps emacs viins -- -s '^z' grml-zsh-fg
1569 #k# prepend the current command with "sudo"
1570 bind2maps emacs viins -- -s "^os" sudo-command-line
1571 #k# jump to after first word (for adding options)
1572 bind2maps emacs viins -- -s '^x1' jump_after_first_word
1573 #k# complete word from history with menu
1574 bind2maps emacs viins -- -s "^x^x" hist-complete
1576 # insert unicode character
1577 # usage example: 'ctrl-x i' 00A7 'ctrl-x i' will give you an §
1578 # See for example http://unicode.org/charts/ for unicode characters code
1579 #k# Insert Unicode character
1580 bind2maps emacs viins -- -s '^xi' insert-unicode-char
1582 # use the new *-pattern-* widgets for incremental history search
1583 if zrcgotwidget history-incremental-pattern-search-backward; then
1584 for seq wid in '^r' history-incremental-pattern-search-backward \
1585 '^s' history-incremental-pattern-search-forward
1587 bind2maps emacs viins vicmd -- -s $seq $wid
1589 builtin unset -v seq wid
1592 if zrcgotkeymap menuselect; then
1593 #m# k Shift-tab Perform backwards menu completion
1594 bind2maps menuselect -- BackTab reverse-menu-complete
1596 #k# menu selection: pick item but stay in the menu
1597 bind2maps menuselect -- -s '\e^M' accept-and-menu-complete
1598 # also use + and INSERT since it's easier to press repeatedly
1599 bind2maps menuselect -- -s '+' accept-and-menu-complete
1600 bind2maps menuselect -- Insert accept-and-menu-complete
1602 # accept a completion and try to complete again by using menu
1603 # completion; very useful with completing directories
1604 # by using 'undo' one's got a simple file browser
1605 bind2maps menuselect -- -s '^o' accept-and-infer-next-history
1608 # Finally, here are still a few hardcoded escape sequences; Special sequences
1609 # like Ctrl-<Cursor-key> etc do suck a fair bit, because they are not
1610 # standardised and most of the time are not available in a terminals terminfo
1613 # While we do not encourage adding bindings like these, we will keep these for
1614 # backward compatibility.
1616 ## use Ctrl-left-arrow and Ctrl-right-arrow for jumping to word-beginnings on
1617 ## the command line.
1619 bind2maps emacs viins vicmd -- -s '\eOc' forward-word
1620 bind2maps emacs viins vicmd -- -s '\eOd' backward-word
1621 # These are for xterm:
1622 bind2maps emacs viins vicmd -- -s '\e[1;5C' forward-word
1623 bind2maps emacs viins vicmd -- -s '\e[1;5D' backward-word
1624 ## the same for alt-left-arrow and alt-right-arrow
1626 bind2maps emacs viins vicmd -- -s '\e\e[C' forward-word
1627 bind2maps emacs viins vicmd -- -s '\e\e[D' backward-word
1629 bind2maps emacs viins vicmd -- -s '^[[1;3C' forward-word
1630 bind2maps emacs viins vicmd -- -s '^[[1;3D' backward-word
1631 # Also try ESC Left/Right:
1632 bind2maps emacs viins vicmd -- -s '\e'${key[Right]} forward-word
1633 bind2maps emacs viins vicmd -- -s '\e'${key[Left]} backward-word
1640 # we don't want to quote/espace URLs on our own...
1641 # if autoload -U url-quote-magic ; then
1642 # zle -N self-insert url-quote-magic
1643 # zstyle ':url-quote-magic:*' url-metas '*?[]^()~#{}='
1645 # print 'Notice: no url-quote-magic available :('
1648 # url-quote doesn't work without bracketed-paste-magic since Zsh 5.1
1649 alias url-quote='autoload -U bracketed-paste-magic url-quote-magic;
1650 zle -N bracketed-paste bracketed-paste-magic; zle -N self-insert url-quote-magic'
1652 alias url-quote='autoload -U url-quote-magic ; zle -N self-insert url-quote-magic'
1655 #m# k ESC-h Call \kbd{run-help} for the 1st word on the command line
1656 alias run-help >&/dev/null && unalias run-help
1657 for rh in run-help{,-git,-ip,-openssl,-p4,-sudo,-svk,-svn}; do
1661 # command not found handling
1663 (( ${COMMAND_NOT_FOUND} == 1 )) &&
1664 function command_not_found_handler () {
1666 if [[ -x ${GRML_ZSH_CNF_HANDLER} ]] ; then
1667 ${GRML_ZSH_CNF_HANDLER} $1
1675 HISTFILE=${HISTFILE:-${ZDOTDIR:-${HOME}}/.zsh_history}
1676 isgrmlcd && HISTSIZE=500 || HISTSIZE=5000
1677 isgrmlcd && SAVEHIST=1000 || SAVEHIST=10000 # useful for setopt append_history
1681 DIRSTACKSIZE=${DIRSTACKSIZE:-20}
1682 DIRSTACKFILE=${DIRSTACKFILE:-${ZDOTDIR:-${HOME}}/.zdirs}
1684 if zstyle -T ':grml:chpwd:dirstack' enable; then
1685 typeset -gaU GRML_PERSISTENT_DIRSTACK
1686 function grml_dirstack_filter () {
1689 if zstyle -s ':grml:chpwd:dirstack' filter filter; then
1690 $filter $1 && return 0
1692 if zstyle -a ':grml:chpwd:dirstack' exclude exclude; then
1693 for entry in "${exclude[@]}"; do
1694 [[ $1 == ${~entry} ]] && return 0
1701 (( ZSH_SUBSHELL )) && return
1702 (( $DIRSTACKSIZE <= 0 )) && return
1703 [[ -z $DIRSTACKFILE ]] && return
1704 grml_dirstack_filter $PWD && return
1705 GRML_PERSISTENT_DIRSTACK=(
1706 $PWD "${(@)GRML_PERSISTENT_DIRSTACK[1,$DIRSTACKSIZE]}"
1708 builtin print -l ${GRML_PERSISTENT_DIRSTACK} >! ${DIRSTACKFILE}
1711 if [[ -f ${DIRSTACKFILE} ]]; then
1712 # Enabling NULL_GLOB via (N) weeds out any non-existing
1713 # directories from the saved dir-stack file.
1714 dirstack=( ${(f)"$(< $DIRSTACKFILE)"}(N) )
1715 # "cd -" won't work after login by just setting $OLDPWD, so
1716 [[ -d $dirstack[1] ]] && cd -q $dirstack[1] && cd -q $OLDPWD
1719 if zstyle -t ':grml:chpwd:dirstack' filter-on-load; then
1720 for i in "${dirstack[@]}"; do
1721 if ! grml_dirstack_filter "$i"; then
1722 GRML_PERSISTENT_DIRSTACK=(
1723 "${GRML_PERSISTENT_DIRSTACK[@]}"
1729 GRML_PERSISTENT_DIRSTACK=( "${dirstack[@]}" )
1733 # directory based profiles
1737 # chpwd_profiles(): Directory Profiles, Quickstart:
1741 # zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)' profile grml
1742 # zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian
1745 # For details see the `grmlzshrc.5' manual page.
1746 function chpwd_profiles () {
1747 local profile context
1750 context=":chpwd:profiles:$PWD"
1751 zstyle -s "$context" profile profile || profile='default'
1752 zstyle -T "$context" re-execute && reexecute=1 || reexecute=0
1754 if (( ${+parameters[CHPWD_PROFILE]} == 0 )); then
1755 typeset -g CHPWD_PROFILE
1756 local CHPWD_PROFILES_INIT=1
1757 (( ${+functions[chpwd_profiles_init]} )) && chpwd_profiles_init
1758 elif [[ $profile != $CHPWD_PROFILE ]]; then
1759 (( ${+functions[chpwd_leave_profile_$CHPWD_PROFILE]} )) \
1760 && chpwd_leave_profile_${CHPWD_PROFILE}
1762 if (( reexecute )) || [[ $profile != $CHPWD_PROFILE ]]; then
1763 (( ${+functions[chpwd_profile_$profile]} )) && chpwd_profile_${profile}
1766 CHPWD_PROFILE="${profile}"
1770 chpwd_functions=( ${chpwd_functions} chpwd_profiles )
1774 # Prompt setup for grml:
1776 # set colors for use in prompts (modern zshs allow for the use of %F{red}foo%f
1777 # in prompts to get a red "foo" embedded, but it's good to keep these for
1778 # backwards compatibility).
1784 MAGENTA="%F{magenta}"
1788 elif zrcautoload colors && colors 2>/dev/null ; then
1789 BLUE="%{${fg[blue]}%}"
1790 RED="%{${fg_bold[red]}%}"
1791 GREEN="%{${fg[green]}%}"
1792 CYAN="%{${fg[cyan]}%}"
1793 MAGENTA="%{${fg[magenta]}%}"
1794 YELLOW="%{${fg[yellow]}%}"
1795 WHITE="%{${fg[white]}%}"
1796 NO_COLOR="%{${reset_color}%}"
1798 BLUE=$'%{\e[1;34m%}'
1800 GREEN=$'%{\e[1;32m%}'
1801 CYAN=$'%{\e[1;36m%}'
1802 WHITE=$'%{\e[1;37m%}'
1803 MAGENTA=$'%{\e[1;35m%}'
1804 YELLOW=$'%{\e[1;33m%}'
1805 NO_COLOR=$'%{\e[0m%}'
1808 # First, the easy ones: PS2..4:
1810 # secondary prompt, printed when the shell needs more information to complete a
1813 # selection prompt used within a select loop.
1815 # the execution trace prompt (setopt xtrace). default: '+%N:%i>'
1818 # Some additional features to use with our prompt:
1822 # - vcs_info setup and version specific fixes
1824 # display battery status on right side of prompt using 'GRML_DISPLAY_BATTERY=1' in .zshrc.pre
1826 function battery () {
1827 if [[ $GRML_DISPLAY_BATTERY -gt 0 ]] ; then
1830 elif isopenbsd ; then
1832 elif isfreebsd ; then
1834 elif isdarwin ; then
1838 GRML_DISPLAY_BATTERY=0
1843 function batterylinux () {
1844 GRML_BATTERY_LEVEL=''
1845 local batteries bat capacity
1846 batteries=( /sys/class/power_supply/BAT*(N) )
1847 if (( $#batteries > 0 )) ; then
1848 for bat in $batteries ; do
1849 if [[ -e $bat/capacity ]]; then
1850 capacity=$(< $bat/capacity)
1852 typeset -F energy_full=$(< $bat/energy_full)
1853 typeset -F energy_now=$(< $bat/energy_now)
1854 typeset -i capacity=$(( 100 * $energy_now / $energy_full))
1856 case $(< $bat/status) in
1858 GRML_BATTERY_LEVEL+=" ^"
1861 if (( capacity < 20 )) ; then
1862 GRML_BATTERY_LEVEL+=" !v"
1864 GRML_BATTERY_LEVEL+=" v"
1868 GRML_BATTERY_LEVEL+=" ="
1871 GRML_BATTERY_LEVEL+="${capacity}%%"
1876 function batteryopenbsd () {
1877 GRML_BATTERY_LEVEL=''
1878 local bat batfull batwarn batnow num
1880 bat=$(sysctl -n hw.sensors.acpibat${num} 2>/dev/null)
1881 if [[ -n $bat ]]; then
1882 batfull=${"$(sysctl -n hw.sensors.acpibat${num}.amphour0)"%% *}
1883 batwarn=${"$(sysctl -n hw.sensors.acpibat${num}.amphour1)"%% *}
1884 batnow=${"$(sysctl -n hw.sensors.acpibat${num}.amphour3)"%% *}
1885 case "$(sysctl -n hw.sensors.acpibat${num}.raw0)" in
1887 if (( batnow < batwarn )) ; then
1888 GRML_BATTERY_LEVEL+=" !v"
1890 GRML_BATTERY_LEVEL+=" v"
1894 GRML_BATTERY_LEVEL+=" ^"
1897 GRML_BATTERY_LEVEL+=" ="
1900 GRML_BATTERY_LEVEL+="${$(( 100 * batnow / batfull ))%%.*}%%"
1905 function batteryfreebsd () {
1906 GRML_BATTERY_LEVEL=''
1910 table=( ${=${${${${${(M)${(f)"$(acpiconf -i $num 2>&1)"}:#(State|Remaining capacity):*}%%( ##|%)}//:[ $'\t']##/@}// /-}//@/ }} )
1911 if [[ -n $table ]] && [[ $table[State] != "not-present" ]] ; then
1912 case $table[State] in
1914 if (( $table[Remaining-capacity] < 20 )) ; then
1915 GRML_BATTERY_LEVEL+=" !v"
1917 GRML_BATTERY_LEVEL+=" v"
1921 GRML_BATTERY_LEVEL+=" ^"
1924 GRML_BATTERY_LEVEL+=" ="
1927 GRML_BATTERY_LEVEL+="$table[Remaining-capacity]%%"
1932 function batterydarwin () {
1933 GRML_BATTERY_LEVEL=''
1935 table=( ${$(pmset -g ps)[(w)8,9]%%(\%|);} )
1936 if [[ -n $table[2] ]] ; then
1939 GRML_BATTERY_LEVEL+=" ^"
1942 if (( $table[1] < 20 )) ; then
1943 GRML_BATTERY_LEVEL+=" !v"
1945 GRML_BATTERY_LEVEL+=" v"
1949 GRML_BATTERY_LEVEL+=" ="
1952 GRML_BATTERY_LEVEL+="$table[1]%%"
1956 # set variable debian_chroot if running in a chroot with /etc/debian_chroot
1957 if [[ -z "$debian_chroot" ]] && [[ -r /etc/debian_chroot ]] ; then
1958 debian_chroot=$(</etc/debian_chroot)
1961 # gather version control information for inclusion in a prompt
1963 if zrcautoload vcs_info; then
1964 # `vcs_info' in zsh versions 4.3.10 and below have a broken `_realpath'
1965 # function, which can cause a lot of trouble with our directory-based
1967 if [[ ${ZSH_VERSION} == 4.3.<-10> ]] ; then
1968 function VCS_INFO_realpath () {
1969 setopt localoptions NO_shwordsplit chaselinks
1970 ( builtin cd -q $1 2> /dev/null && pwd; )
1974 zstyle ':vcs_info:*' max-exports 2
1976 if [[ -o restricted ]]; then
1977 zstyle ':vcs_info:*' enable NONE
1981 typeset -A grml_vcs_coloured_formats
1982 typeset -A grml_vcs_plain_formats
1984 grml_vcs_plain_formats=(
1985 format "(%s%)-[%b] " "zsh: %r"
1986 actionformat "(%s%)-[%b|%a] " "zsh: %r"
1987 rev-branchformat "%b:%r"
1990 grml_vcs_coloured_formats=(
1991 format "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${MAGENTA}]${NO_COLOR} "
1992 actionformat "${MAGENTA}(${NO_COLOR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${YELLOW}|${RED}%a${MAGENTA}]${NO_COLOR} "
1993 rev-branchformat "%b${RED}:${YELLOW}%r"
1996 typeset GRML_VCS_COLOUR_MODE=xxx
1998 function grml_vcs_info_toggle_colour () {
2000 if [[ $GRML_VCS_COLOUR_MODE == plain ]]; then
2001 grml_vcs_info_set_formats coloured
2003 grml_vcs_info_set_formats plain
2008 function grml_vcs_info_set_formats () {
2010 #setopt localoptions xtrace
2011 local mode=$1 AF F BF
2012 if [[ $mode == coloured ]]; then
2013 AF=${grml_vcs_coloured_formats[actionformat]}
2014 F=${grml_vcs_coloured_formats[format]}
2015 BF=${grml_vcs_coloured_formats[rev-branchformat]}
2016 GRML_VCS_COLOUR_MODE=coloured
2018 AF=${grml_vcs_plain_formats[actionformat]}
2019 F=${grml_vcs_plain_formats[format]}
2020 BF=${grml_vcs_plain_formats[rev-branchformat]}
2021 GRML_VCS_COLOUR_MODE=plain
2024 zstyle ':vcs_info:*' actionformats "$AF" "zsh: %r"
2025 zstyle ':vcs_info:*' formats "$F" "zsh: %r"
2026 zstyle ':vcs_info:(sv[nk]|bzr):*' branchformat "$BF"
2030 # Change vcs_info formats for the grml prompt. The 2nd format sets up
2031 # $vcs_info_msg_1_ to contain "zsh: repo-name" used to set our screen title.
2032 if [[ "$TERM" == dumb ]] ; then
2033 grml_vcs_info_set_formats plain
2035 grml_vcs_info_set_formats coloured
2038 # Now for the fun part: The grml prompt themes in `promptsys' mode of operation
2040 # This actually defines three prompts:
2046 # They all share the same code and only differ with respect to which items they
2047 # contain. The main source of documentation is the `prompt_grml_help' function
2048 # below, which gets called when the user does this: prompt -h grml
2050 function prompt_grml_help () {
2054 This is the prompt as used by the grml-live system <http://grml.org>. It is
2055 a rather simple one-line prompt, that by default looks something like this:
2057 <user>@<host> <current-working-directory>[ <vcs_info-data>]%
2059 The prompt itself integrates with zsh's prompt themes system (as you are
2060 witnessing right now) and is configurable to a certain degree. In
2061 particular, these aspects are customisable:
2063 - The items used in the prompt (e.g. you can remove \`user' from
2064 the list of activated items, which will cause the user name to
2065 be omitted from the prompt string).
2067 - The attributes used with the items are customisable via strings
2068 used before and after the actual item.
2070 The available items are: at, battery, change-root, date, grml-chroot,
2071 history, host, jobs, newline, path, percent, rc, rc-always, sad-smiley,
2072 shell-level, time, user, vcs
2074 The actual configuration is done via zsh's \`zstyle' mechanism. The
2075 context, that is used while looking up styles is:
2077 ':prompt:grml:<left-or-right>:<subcontext>'
2079 Here <left-or-right> is either \`left' or \`right', signifying whether the
2080 style should affect the left or the right prompt. <subcontext> is either
2081 \`setup' or 'items:<item>', where \`<item>' is one of the available items.
2085 - use-rprompt (boolean): If \`true' (the default), print a sad smiley
2086 in $RPROMPT if the last command a returned non-successful error code.
2087 (This in only valid if <left-or-right> is "right"; ignored otherwise)
2089 - items (list): The list of items used in the prompt. If \`vcs' is
2090 present in the list, the theme's code invokes \`vcs_info'
2091 accordingly. Default (left): rc change-root user at host path vcs
2092 percent; Default (right): sad-smiley
2094 - strip-sensitive-characters (boolean): If the \`prompt_subst' option
2095 is active in zsh, the shell performs lots of expansions on prompt
2096 variable strings, including command substitution. So if you don't
2097 control where some of your prompt strings is coming from, this is
2098 an exploitable weakness. Grml's zsh setup does not set this option
2099 and it is off in the shell in zsh-mode by default. If it *is* turned
2100 on however, this style becomes active, and there are two flavours of
2101 it: On per default is a global variant in the '*:setup' context. This
2102 strips characters after the whole prompt string was constructed. There
2103 is a second variant in the '*:items:<item>', that is off by default.
2104 It allows fine grained control over which items' data is stripped.
2105 The characters that are stripped are: \$ and \`.
2107 Available styles in 'items:<item>' are: pre, post. These are strings that
2108 are inserted before (pre) and after (post) the item in question. Thus, the
2109 following would cause the user name to be printed in red instead of the
2112 zstyle ':prompt:grml:*:items:user' pre '%F{red}'
2114 Note, that the \`post' style may remain at its default value, because its
2115 default value is '%f', which turns the foreground text attribute off (which
2116 is exactly, what is still required with the new \`pre' value).
2120 function prompt_grml-chroot_help () {
2124 This is a variation of the grml prompt, see: prompt -h grml
2126 The main difference is the default value of the \`items' style. The rest
2127 behaves exactly the same. Here are the defaults for \`grml-chroot':
2129 - left: grml-chroot user at host path percent
2130 - right: (empty list)
2134 function prompt_grml-large_help () {
2138 This is a variation of the grml prompt, see: prompt -h grml
2140 The main difference is the default value of the \`items' style. In
2141 particular, this theme uses _two_ lines instead of one with the plain
2142 \`grml' theme. The rest behaves exactly the same. Here are the defaults
2145 - left: rc jobs history shell-level change-root time date newline user
2146 at host path vcs percent
2151 function grml_prompt_setup () {
2153 autoload -Uz vcs_info
2154 # The following autoload is disabled for now, since this setup includes a
2155 # static version of the ‘add-zsh-hook’ function above. It needs to be
2156 # re-enabled as soon as that static definition is removed again.
2157 #autoload -Uz add-zsh-hook
2158 add-zsh-hook precmd prompt_$1_precmd
2161 function prompt_grml_setup () {
2162 grml_prompt_setup grml
2165 function prompt_grml-chroot_setup () {
2166 grml_prompt_setup grml-chroot
2169 function prompt_grml-large_setup () {
2170 grml_prompt_setup grml-large
2173 # These maps define default tokens and pre-/post-decoration for items to be
2174 # used within the themes. All defaults may be customised in a context sensitive
2175 # matter by using zsh's `zstyle' mechanism.
2176 typeset -gA grml_prompt_pre_default \
2177 grml_prompt_post_default \
2178 grml_prompt_token_default \
2179 grml_prompt_token_function
2181 grml_prompt_pre_default=(
2186 grml-chroot '%F{red}'
2196 shell-level '%F{red}'
2202 grml_prompt_post_default=(
2223 grml_prompt_token_default=(
2225 battery 'GRML_BATTERY_LEVEL'
2226 change-root 'debian_chroot'
2228 grml-chroot 'GRML_CHROOT'
2229 history '{history#%!} '
2231 jobs '[%j running job(s)] '
2233 path '%40<..<%~%<< '
2237 sad-smiley '%(?..:()'
2238 shell-level '%(3L.+ .)'
2239 time '%D{%H:%M:%S} '
2244 function grml_theme_has_token () {
2245 if (( ARGC != 1 )); then
2246 printf 'usage: grml_theme_has_token <name>\n'
2249 (( ${+grml_prompt_token_default[$1]} ))
2252 function GRML_theme_add_token_usage () {
2254 Usage: grml_theme_add_token <name> [-f|-i] <token/function> [<pre> <post>]
2256 <name> is the name for the newly added token. If the \`-f' or \`-i' options
2257 are used, <token/function> is the name of the function (see below for
2258 details). Otherwise it is the literal token string to be used. <pre> and
2259 <post> are optional.
2263 -f <function> Use a function named \`<function>' each time the token
2266 -i <function> Use a function named \`<function>' to initialise the
2267 value of the token _once_ at runtime.
2269 The functions are called with one argument: the token's new name. The
2270 return value is expected in the \$REPLY parameter. The use of these
2271 options is mutually exclusive.
2273 There is a utility function \`grml_theme_has_token', which you can use
2274 to test if a token exists before trying to add it. This can be a guard
2275 for situations in which a \`grml_theme_add_token' call may happen more
2280 To add a new token \`day' that expands to the current weekday in the
2281 current locale in green foreground colour, use this:
2283 grml_theme_add_token day '%D{%A}' '%F{green}' '%f'
2285 Another example would be support for \$VIRTUAL_ENV:
2287 function virtual_env_prompt () {
2288 REPLY=\${VIRTUAL_ENV+\${VIRTUAL_ENV:t} }
2290 grml_theme_add_token virtual-env -f virtual_env_prompt
2292 After that, you will be able to use a changed \`items' style to
2293 assemble your prompt.
2297 function grml_theme_add_token () {
2299 local name token pre post
2300 local -i init funcall
2302 if (( ARGC == 0 )); then
2303 GRML_theme_add_token_usage
2313 if [[ $1 == '-f' ]]; then
2316 elif [[ $1 == '-i' ]]; then
2321 if (( ARGC == 0 )); then
2323 grml_theme_add_token: No token-string/function-name provided!\n\n'
2324 GRML_theme_add_token_usage
2329 if (( ARGC != 0 && ARGC != 2 )); then
2331 grml_theme_add_token: <pre> and <post> need to by specified _both_!\n\n'
2332 GRML_theme_add_token_usage
2341 if grml_theme_has_token $name; then
2343 grml_theme_add_token: Token `%s'\'' exists! Giving up!\n\n' $name
2344 GRML_theme_add_token_usage
2352 grml_prompt_pre_default[$name]=$pre
2353 grml_prompt_post_default[$name]=$post
2354 if (( funcall )); then
2355 grml_prompt_token_function[$name]=$token
2356 grml_prompt_token_default[$name]=23
2358 grml_prompt_token_default[$name]=$token
2362 function grml_wrap_reply () {
2369 if (( ${+parameters[$new]} )); then
2370 REPLY="${left}${(P)new}${right}"
2376 function grml_prompt_addto () {
2379 local lr it apre apost new v REPLY
2383 [[ $target == PS1 ]] && lr=left || lr=right
2384 zstyle -a ":prompt:${grmltheme}:${lr}:setup" items items || items=( "$@" )
2385 typeset -g "${target}="
2386 for it in "${items[@]}"; do
2387 zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" pre apre \
2388 || apre=${grml_prompt_pre_default[$it]}
2389 zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" post apost \
2390 || apost=${grml_prompt_post_default[$it]}
2391 zstyle -s ":prompt:${grmltheme}:${lr}:items:$it" token new \
2392 || new=${grml_prompt_token_default[$it]}
2393 if (( ${+grml_prompt_token_function[$it]} )); then
2395 ${grml_prompt_token_function[$it]} $it
2399 grml_wrap_reply $target $new '' ''
2402 grml_wrap_reply $target $new '(' ')'
2405 if [[ -n ${(P)new} ]]; then
2412 v="vcs_info_msg_${new}_"
2413 if (( ! vcscalled )); then
2417 if (( ${+parameters[$v]} )) && [[ -n "${(P)v}" ]]; then
2426 # Strip volatile characters per item. This is off by default. See the
2427 # global stripping code a few lines below for details.
2428 if [[ -o prompt_subst ]] && zstyle -t ":prompt:${grmltheme}:${lr}:items:$it" \
2429 strip-sensitive-characters
2431 REPLY="${REPLY//[$\`]/}"
2433 typeset -g "${target}=${(P)target}${apre}${REPLY}${apost}"
2436 # Per default, strip volatile characters (in the prompt_subst case)
2437 # globally. If the option is off, the style has no effect. For more
2438 # control, this can be turned off and stripping can be configured on a
2439 # per-item basis (see above).
2440 if [[ -o prompt_subst ]] && zstyle -T ":prompt:${grmltheme}:${lr}:setup" \
2441 strip-sensitive-characters
2443 typeset -g "${target}=${${(P)target}//[$\`]/}"
2447 function prompt_grml_precmd () {
2449 local grmltheme=grml
2450 local -a left_items right_items
2451 left_items=(rc change-root user at host path vcs percent)
2452 right_items=(sad-smiley)
2454 prompt_grml_precmd_worker
2457 function prompt_grml-chroot_precmd () {
2459 local grmltheme=grml-chroot
2460 local -a left_items right_items
2461 left_items=(grml-chroot user at host path percent)
2464 prompt_grml_precmd_worker
2467 function prompt_grml-large_precmd () {
2469 local grmltheme=grml-large
2470 local -a left_items right_items
2471 left_items=(rc jobs history shell-level change-root time date newline
2472 user at host path vcs percent)
2473 right_items=(sad-smiley)
2475 prompt_grml_precmd_worker
2478 function prompt_grml_precmd_worker () {
2480 local -i vcscalled=0
2482 grml_prompt_addto PS1 "${left_items[@]}"
2483 if zstyle -T ":prompt:${grmltheme}:right:setup" use-rprompt; then
2484 grml_prompt_addto RPS1 "${right_items[@]}"
2488 function grml_prompt_fallback () {
2492 p0="${RED}%(?..%? )${WHITE}${debian_chroot:+($debian_chroot)}"
2493 p1="${BLUE}%n${NO_COLOR}@%m %40<...<%B%~%b%<< "'${vcs_info_msg_0_}'"%# "
2494 if (( EUID == 0 )); then
2495 PROMPT="${BLUE}${p0}${RED}${p1}"
2497 PROMPT="${RED}${p0}${BLUE}${p1}"
2501 if zrcautoload promptinit && promptinit 2>/dev/null ; then
2502 grml_status_feature promptinit 0
2503 # Since we define the required functions in here and not in files in
2504 # $fpath, we need to stick the theme's name into `$prompt_themes'
2505 # ourselves, since promptinit does not pick them up otherwise.
2506 prompt_themes+=( grml grml-chroot grml-large )
2507 # Also, keep the array sorted...
2508 prompt_themes=( "${(@on)prompt_themes}" )
2510 grml_status_feature promptinit 1
2511 grml_prompt_fallback
2512 function precmd () { (( ${+functions[vcs_info]} )) && vcs_info; }
2516 # The prompt themes use modern features of zsh, that require at least
2517 # version 4.3.7 of the shell. Use the fallback otherwise.
2518 if [[ $GRML_DISPLAY_BATTERY -gt 0 ]]; then
2519 zstyle ':prompt:grml:right:setup' items sad-smiley battery
2520 add-zsh-hook precmd battery
2522 if [[ "$TERM" == dumb ]] ; then
2523 zstyle ":prompt:grml(|-large|-chroot):*:items:grml-chroot" pre ''
2524 zstyle ":prompt:grml(|-large|-chroot):*:items:grml-chroot" post ' '
2525 for i in rc user path jobs history date time shell-level; do
2526 zstyle ":prompt:grml(|-large|-chroot):*:items:$i" pre ''
2527 zstyle ":prompt:grml(|-large|-chroot):*:items:$i" post ''
2530 zstyle ':prompt:grml(|-large|-chroot):right:setup' use-rprompt false
2531 elif (( EUID == 0 )); then
2532 zstyle ':prompt:grml(|-large|-chroot):*:items:user' pre '%B%F{red}'
2535 # Finally enable one of the prompts.
2536 if [[ -n $GRML_CHROOT ]]; then
2538 elif [[ $GRMLPROMPT -gt 0 ]]; then
2544 grml_prompt_fallback
2545 function precmd () { (( ${+functions[vcs_info]} )) && vcs_info; }
2548 # make sure to use right prompt only when not running a command
2549 is41 && setopt transient_rprompt
2551 # Terminal-title wizardry
2553 function ESC_print () {
2554 info_print $'\ek' $'\e\\' "$@"
2556 function set_title () {
2557 info_print $'\e]0;' $'\a' "$@"
2560 function info_print () {
2561 local esc_begin esc_end
2565 printf '%s' ${esc_begin}
2567 printf '%s' "${esc_end}"
2570 function grml_reset_screen_title () {
2571 # adjust title of xterm
2572 # see http://www.faqs.org/docs/Linux-mini/Xterm-Title.html
2573 [[ ${NOTITLE:-} -gt 0 ]] && return 0
2575 (xterm*|rxvt*|alacritty)
2576 set_title ${(%):-"%n@%m: %~"}
2581 function grml_vcs_to_screen_title () {
2582 if [[ $TERM == screen* ]] ; then
2583 if [[ -n ${vcs_info_msg_1_} ]] ; then
2584 ESC_print ${vcs_info_msg_1_}
2591 function grml_maintain_name () {
2593 localname="$(uname -n)"
2595 # set hostname if not running on local machine
2596 if [[ -n "$HOSTNAME" ]] && [[ "$HOSTNAME" != "${localname}" ]] ; then
2601 function grml_cmd_to_screen_title () {
2602 # get the name of the program currently running and hostname of local
2603 # machine set screen window title if running in a screen
2604 if [[ "$TERM" == screen* ]] ; then
2605 local CMD="${1[(wr)^(*=*|sudo|ssh|-*)]}$NAME"
2610 function grml_control_xterm_title () {
2612 (xterm*|rxvt*|alacritty)
2613 set_title "${(%):-"%n@%m:"}" "$2"
2618 # The following autoload is disabled for now, since this setup includes a
2619 # static version of the ‘add-zsh-hook’ function above. It needs to be
2620 # re-enabled as soon as that static definition is removed again.
2621 #zrcautoload add-zsh-hook || add-zsh-hook () { :; }
2622 if [[ $NOPRECMD -eq 0 ]]; then
2623 add-zsh-hook precmd grml_reset_screen_title
2624 add-zsh-hook precmd grml_vcs_to_screen_title
2625 add-zsh-hook preexec grml_maintain_name
2626 add-zsh-hook preexec grml_cmd_to_screen_title
2627 if [[ $NOTITLE -eq 0 ]]; then
2628 add-zsh-hook preexec grml_control_xterm_title
2632 # 'hash' some often used directories
2634 hash -d deb=/var/cache/apt/archives
2635 hash -d doc=/usr/share/doc
2636 hash -d linux=/lib/modules/$(command uname -r)/build/
2637 hash -d log=/var/log
2638 hash -d slog=/var/log/syslog
2639 hash -d src=/usr/src
2640 hash -d www=/var/www
2644 if check_com -c screen ; then
2645 if [[ $UID -eq 0 ]] ; then
2646 if [[ -r /etc/grml/screenrc ]]; then
2647 alias screen='screen -c /etc/grml/screenrc'
2649 elif [[ ! -r $HOME/.screenrc ]] ; then
2650 if [[ -r /etc/grml/screenrc_grml ]]; then
2651 alias screen='screen -c /etc/grml/screenrc_grml'
2653 if [[ -r /etc/grml/screenrc ]]; then
2654 alias screen='screen -c /etc/grml/screenrc'
2660 # do we have GNU ls with color-support?
2661 if [[ "$TERM" != dumb ]]; then
2662 #a1# List files with colors (\kbd{ls \ldots})
2663 alias ls="command ls ${ls_options:+${ls_options[*]}}"
2664 #a1# List all files, with colors (\kbd{ls -la \ldots})
2665 alias la="command ls -la ${ls_options:+${ls_options[*]}}"
2666 #a1# List files with long colored list, without dotfiles (\kbd{ls -l \ldots})
2667 alias ll="command ls -l ${ls_options:+${ls_options[*]}}"
2668 #a1# List files with long colored list, human readable sizes (\kbd{ls -hAl \ldots})
2669 alias lh="command ls -hAl ${ls_options:+${ls_options[*]}}"
2670 #a1# List files with long colored list, append qualifier to filenames (\kbd{ls -l \ldots})\\&\quad(\kbd{/} for directories, \kbd{@} for symlinks ...)
2671 alias l="command ls -l ${ls_options:+${ls_options[*]}}"
2673 alias la='command ls -la'
2674 alias ll='command ls -l'
2675 alias lh='command ls -hAl'
2676 alias l='command ls -l'
2679 if [[ -r /proc/mdstat ]]; then
2680 alias mdstat='cat /proc/mdstat'
2683 alias ...='cd ../../'
2685 # generate alias named "$KERNELVERSION-reboot" so you can use boot with kexec:
2686 if [[ -x /sbin/kexec ]] && [[ -r /proc/cmdline ]] ; then
2687 alias "$(uname -r)-reboot"="kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)""
2690 # see http://www.cl.cam.ac.uk/~mgk25/unicode.html#term for details
2691 alias term2iso="echo 'Setting terminal to iso mode' ; print -n '\e%@'"
2692 alias term2utf="echo 'Setting terminal to utf-8 mode'; print -n '\e%G'"
2694 # make sure it is not assigned yet
2695 [[ -n ${aliases[utf2iso]} ]] && unalias utf2iso
2696 function utf2iso () {
2699 for ENV in $(env | command grep -i '.utf') ; do
2700 eval export "$(echo $ENV | sed 's/UTF-8/iso885915/ ; s/utf8/iso885915/')"
2705 # make sure it is not assigned yet
2706 [[ -n ${aliases[iso2utf]} ]] && unalias iso2utf
2707 function iso2utf () {
2708 if ! isutfenv ; then
2710 for ENV in $(env | command grep -i '\.iso') ; do
2711 eval export "$(echo $ENV | sed 's/iso.*/UTF-8/ ; s/ISO.*/UTF-8/')"
2716 # especially for roadwarriors using GNU screen and ssh:
2717 if ! check_com asc &>/dev/null ; then
2718 function asc () { autossh -t "$@" 'screen -RdU' }
2722 #f1# Hints for the use of zsh on grml
2723 function zsh-help () {
2724 print "$bg[white]$fg[black]
2725 zsh-help - hints for use of zsh on grml
2726 =======================================$reset_color"
2729 Main configuration of zsh happens in /etc/zsh/zshrc.
2730 That file is part of the package grml-etc-core, if you want to
2731 use them on a non-grml-system just get the tar.gz from
2732 http://deb.grml.org/ or (preferably) get it from the git repository:
2734 http://git.grml.org/f/grml-etc-core/etc/zsh/zshrc
2736 This version of grml'\''s zsh setup does not use skel/.zshrc anymore.
2737 The file is still there, but it is empty for backwards compatibility.
2739 For your own changes use these two files:
2743 The former is sourced very early in our zshrc, the latter is sourced
2746 System wide configuration without touching configuration files of grml
2747 can take place in /etc/zsh/zshrc.local.
2749 For information regarding zsh start at http://grml.org/zsh/
2751 Take a look at grml'\''s zsh refcard:
2752 % xpdf =(zcat /usr/share/doc/grml-docs/zsh/grml-zsh-refcard.pdf.gz)
2754 Check out the main zsh refcard:
2755 % '$BROWSER' http://www.bash2zsh.com/zsh_refcard/refcard.pdf
2757 And of course visit the zsh-lovers:
2760 You can adjust some options through environment variables when
2761 invoking zsh without having to edit configuration files.
2762 Basically meant for bash users who are not used to the power of
2765 "NOCOR=1 zsh" => deactivate automatic correction
2766 "NOMENU=1 zsh" => do not use auto menu completion
2767 (note: use ctrl-d for completion instead!)
2768 "NOPRECMD=1 zsh" => disable the precmd + preexec commands (set GNU screen title)
2769 "NOTITLE=1 zsh" => disable setting the title of xterms without disabling
2770 preexec() and precmd() completely
2771 "GRML_DISPLAY_BATTERY=1 zsh"
2772 => activate battery status on right side of prompt (WIP)
2773 "COMMAND_NOT_FOUND=1 zsh"
2774 => Enable a handler if an external command was not found
2775 The command called in the handler can be altered by setting
2776 the GRML_ZSH_CNF_HANDLER variable, the default is:
2777 "/usr/share/command-not-found/command-not-found"
2779 A value greater than 0 is enables a feature; a value equal to zero
2780 disables it. If you like one or the other of these settings, you can
2781 add them to ~/.zshrc.pre to ensure they are set when sourcing grml'\''s
2785 $bg[white]$fg[black]
2786 Please report wishes + bugs to the grml-team: http://grml.org/bugs/
2787 Enjoy your grml system with the zsh!$reset_color"
2791 if [[ -r /etc/debian_version ]] ; then
2792 if [[ -z "$GRML_NO_APT_ALIASES" ]]; then
2793 #a3# Execute \kbd{apt-cache policy}
2794 alias acp='apt-cache policy'
2795 if check_com -c apt ; then
2796 #a3# Execute \kbd{apt search}
2797 alias acs='apt search'
2798 #a3# Execute \kbd{apt show}
2799 alias acsh='apt show'
2800 #a3# Execute \kbd{apt dist-upgrade}
2801 salias adg="apt dist-upgrade"
2802 #a3# Execute \kbd{apt upgrade}
2803 salias ag="apt upgrade"
2804 #a3# Execute \kbd{apt install}
2805 salias agi="apt install"
2806 #a3# Execute \kbd{apt update}
2807 salias au="apt update"
2809 alias acs='apt-cache search'
2810 alias acsh='apt-cache show'
2811 salias adg="apt-get dist-upgrade"
2812 salias ag="apt-get upgrade"
2813 salias agi="apt-get install"
2814 salias au="apt-get update"
2816 #a3# Execute \kbd{aptitude install}
2817 salias ati="aptitude install"
2818 #a3# Execute \kbd{aptitude update ; aptitude safe-upgrade}
2819 salias -a up="aptitude update ; aptitude safe-upgrade"
2820 #a3# Execute \kbd{dpkg-buildpackage}
2821 alias dbp='dpkg-buildpackage'
2822 #a3# Execute \kbd{grep-excuses}
2823 alias ge='grep-excuses'
2826 # get a root shell as normal user in live-cd mode:
2827 if isgrmlcd && [[ $UID -ne 0 ]] ; then
2833 # use /var/log/syslog iff present, fallback to journalctl otherwise
2834 if [ -e /var/log/syslog ] ; then
2835 #a1# Take a look at the syslog: \kbd{\$PAGER /var/log/syslog || journalctl}
2836 salias llog="$PAGER /var/log/syslog" # take a look at the syslog
2837 #a1# Take a look at the syslog: \kbd{tail -f /var/log/syslog || journalctl}
2838 salias tlog="tail -f /var/log/syslog" # follow the syslog
2839 elif check_com -c journalctl ; then
2840 salias llog="journalctl"
2841 salias tlog="journalctl -f"
2844 # sort installed Debian-packages by size
2845 if check_com -c dpkg-query ; then
2846 #a3# List installed Debian-packages sorted by size
2847 alias debs-by-size="dpkg-query -Wf 'x \${Installed-Size} \${Package} \${Status}\n' | sed -ne '/^x /d' -e '/^x \(.*\) install ok installed$/s//\1/p' | sort -nr"
2850 # if cdrecord is a symlink (to wodim) or isn't present at all warn:
2851 if [[ -L /usr/bin/cdrecord ]] || ! check_com -c cdrecord; then
2852 if check_com -c wodim; then
2853 function cdrecord () {
2855 cdrecord is not provided under its original name by Debian anymore.
2856 See #377109 in the BTS of Debian for more details.
2858 Please use the wodim binary instead
2866 # No core dumps: important for a live-cd-system
2871 function grmlstuff () {
2872 # people should use 'grml-x'!
2873 if check_com -c 915resolution; then
2874 function 855resolution () {
2875 echo "Please use 915resolution as resolution modifying tool for Intel \
2881 #a1# Output version of running grml
2882 alias grml-version='cat /etc/grml_version'
2884 if check_com -c grml-debootstrap ; then
2885 function debian2hd () {
2886 echo "Installing debian to harddisk is possible by using grml-debootstrap."
2891 if check_com -c tmate && check_com -c qrencode ; then
2892 function grml-remote-support() {
2893 tmate -L grml-remote-support new -s grml-remote-support -d
2894 tmate -L grml-remote-support wait tmate-ready
2895 tmate -L grml-remote-support display -p '#{tmate_ssh}' | qrencode -t ANSI
2896 echo "tmate session: $(tmate -L grml-remote-support display -p '#{tmate_ssh}')"
2898 echo "Scan this QR code and send it to your support team."
2903 # now run the functions
2905 is4 && isgrml && grmlstuff
2909 is4 && xsource "/etc/zsh/keephack"
2911 # wonderful idea of using "e" glob qualifier by Peter Stephenson
2912 # You use it as follows:
2913 # $ NTREF=/reference/file
2915 # This lists all the files in the current directory newer than the reference file.
2916 # You can also specify the reference file inline; note quotes:
2917 # $ ls -l *(e:'nt ~/.zshenv':)
2918 is4 && function nt () {
2919 if [[ -n $1 ]] ; then
2922 [[ $REPLY -nt $NTREF ]]
2927 #f1# Reload an autoloadable function
2928 function freload () { while (( $# )); do; unfunction $1; autoload -U $1; shift; done }
2929 compdef _functions freload
2934 # e.g.: a -> b -> c -> d ....
2939 # if parameter is given with leading '=', lookup $PATH for parameter and resolve that
2943 # Note: limit for recursive symlinks on linux:
2944 # http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/fs/namei.c?id=refs/heads/master#l808
2945 # This limits recursive symlink follows to 8,
2946 # while limiting consecutive symlinks to 40.
2948 # When resolving and displaying information about symlinks, no check is made
2949 # that the displayed information does make any sense on your OS.
2950 # We leave that decission to the user.
2952 # The zstat module is used to detect symlink loops. zstat is available since zsh4.
2953 # With an older zsh you will need to abort with <C-c> in that case.
2954 # When a symlink loop is detected, a warning ist printed and further processing is stopped.
2956 # Module zstat is loaded by default in grml zshrc, no extra action needed for that.
2959 # If you happen to come across a symlink that points to a destination on another partition
2960 # with the same inode number, that will be marked as symlink loop though it is not.
2961 # Two hints for this situation:
2962 # I) Play lottery the same day, as you seem to be rather lucky right now.
2967 # 1 file/dir not accesible
2968 # 2 symlink loop detected
2970 #f1# List symlinks in detail (more detailed version of 'readlink -f', 'whence -s' and 'namei -l')
2972 if [[ -z ${1} ]] ; then
2973 printf 'Usage: %s <symlink(s)>\n' "${0}"
2977 local file jumpd curdir
2978 local -i 10 RTN LINODE i
2983 for file in "${@}" ; do
2985 ls -l "${file:a}" || RTN=1
2987 while [[ -h "$file" ]] ; do
2989 LINODE=$(zstat -L +inode "${file}")
2990 for i in ${SEENINODES} ; do
2991 if (( ${i} == ${LINODE} )) ; then
2992 builtin cd -q "${curdir}"
2993 print 'link loop detected, aborting!'
2997 SEENINODES+=${LINODE}
3002 if [[ -d ${jumpd} ]] ; then
3003 builtin cd -q "${jumpd}" || RTN=1
3005 file=$(readlink "$file")
3010 if [[ -d ${jumpd} ]] ; then
3011 builtin cd -q "${jumpd}" || RTN=1
3014 ls -l "${PWD}/${file}" || RTN=1
3017 if (( ${#} >= 1 )) ; then
3020 builtin cd -q "${curdir}"
3025 if check_com -c $PAGER ; then
3026 #f3# View Debian's changelog of given package(s)
3027 function dchange () {
3029 [[ -z "$1" ]] && printf 'Usage: %s <package_name(s)>\n' "$0" && return 1
3033 # `less` as $PAGER without e.g. `|lesspipe %s` inside $LESSOPEN can't properly
3034 # read *.gz files, try to detect this to use vi instead iff available
3037 if [[ ${$(typeset -p PAGER)[2]} = -a ]] ; then
3038 viewer=($PAGER) # support PAGER=(less -Mr) but leave array untouched
3040 viewer=(${=PAGER}) # support PAGER='less -Mr'
3043 if [[ ${viewer[1]:t} = less ]] && [[ -z "${LESSOPEN}" ]] && check_com vi ; then
3047 for package in "$@" ; do
3048 if [[ -r /usr/share/doc/${package}/changelog.Debian.gz ]] ; then
3049 $viewer /usr/share/doc/${package}/changelog.Debian.gz
3050 elif [[ -r /usr/share/doc/${package}/changelog.gz ]] ; then
3051 $viewer /usr/share/doc/${package}/changelog.gz
3052 elif [[ -r /usr/share/doc/${package}/changelog ]] ; then
3053 $viewer /usr/share/doc/${package}/changelog
3055 if check_com -c aptitude ; then
3056 echo "No changelog for package $package found, using aptitude to retrieve it."
3057 aptitude changelog "$package"
3058 elif check_com -c apt-get ; then
3059 echo "No changelog for package $package found, using apt-get to retrieve it."
3060 apt-get changelog "$package"
3062 echo "No changelog for package $package found, sorry."
3067 function _dchange () { _files -W /usr/share/doc -/ }
3068 compdef _dchange dchange
3070 #f3# View Debian's NEWS of a given package
3073 if [[ -r /usr/share/doc/$1/NEWS.Debian.gz ]] ; then
3074 $PAGER /usr/share/doc/$1/NEWS.Debian.gz
3076 if [[ -r /usr/share/doc/$1/NEWS.gz ]] ; then
3077 $PAGER /usr/share/doc/$1/NEWS.gz
3079 echo "No NEWS file for package $1 found, sorry."
3084 function _dnews () { _files -W /usr/share/doc -/ }
3085 compdef _dnews dnews
3087 #f3# View Debian's copyright of a given package
3088 function dcopyright () {
3090 if [[ -r /usr/share/doc/$1/copyright ]] ; then
3091 $PAGER /usr/share/doc/$1/copyright
3093 echo "No copyright file for package $1 found, sorry."
3097 function _dcopyright () { _files -W /usr/share/doc -/ }
3098 compdef _dcopyright dcopyright
3100 #f3# View upstream's changelog of a given package
3101 function uchange () {
3103 if [[ -r /usr/share/doc/$1/changelog.gz ]] ; then
3104 $PAGER /usr/share/doc/$1/changelog.gz
3106 echo "No changelog for package $1 found, sorry."
3110 function _uchange () { _files -W /usr/share/doc -/ }
3111 compdef _uchange uchange
3115 function profile () {
3116 ZSH_PROFILE_RC=1 zsh "$@"
3119 #f1# Edit an alias via zle
3120 function edalias () {
3121 [[ -z "$1" ]] && { echo "Usage: edalias <alias_to_edit>" ; return 1 } || vared aliases'[$1]' ;
3123 compdef _aliases edalias
3125 #f1# Edit a function via zle
3126 function edfunc () {
3127 [[ -z "$1" ]] && { echo "Usage: edfunc <function_to_edit>" ; return 1 } || zed -f "$1" ;
3129 compdef _functions edfunc
3131 # use it e.g. via 'Restart apache2'
3132 #m# f6 Start() \kbd{service \em{process}}\quad\kbd{start}
3133 #m# f6 Restart() \kbd{service \em{process}}\quad\kbd{restart}
3134 #m# f6 Stop() \kbd{service \em{process}}\quad\kbd{stop}
3135 #m# f6 Reload() \kbd{service \em{process}}\quad\kbd{reload}
3136 #m# f6 Force-Reload() \kbd{service \em{process}}\quad\kbd{force-reload}
3137 #m# f6 Status() \kbd{service \em{process}}\quad\kbd{status}
3138 if [[ -d /etc/init.d || -d /etc/service ]] ; then
3139 function __start_stop () {
3140 local action_="${1:l}" # e.g Start/Stop/Restart
3144 local service_target_="$(readlink /etc/init.d/$service_)"
3145 if [[ $service_target_ == "/usr/bin/sv" ]]; then
3147 case "${action_}" in
3148 start) if [[ ! -e /etc/service/$service_ ]]; then
3149 $SUDO ln -s "/etc/sv/$service_" "/etc/service/"
3151 $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
3153 # there is no reload in runits sysv emulation
3154 reload) $SUDO "/etc/init.d/$service_" "force-reload" "$param_" ;;
3155 *) $SUDO "/etc/init.d/$service_" "${action_}" "$param_" ;;
3158 # sysv/sysvinit-utils, upstart
3159 if check_com -c service ; then
3160 $SUDO service "$service_" "${action_}" "$param_"
3162 $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
3167 function _grmlinitd () {
3169 scripts=( /etc/init.d/*(x:t) )
3170 _describe "service startup script" scripts
3173 for i in Start Restart Stop Force-Reload Reload Status ; do
3174 eval "function $i () { __start_stop $i \"\$1\" \"\$2\" ; }"
3175 compdef _grmlinitd $i
3180 #f1# Provides useful information on globbing
3181 function H-Glob () {
3187 p named pipes (FIFOs)
3188 * executable plain files (0100)
3189 % device files (character or block special)
3190 %b block special files
3191 %c character special files
3192 r owner-readable files (0400)
3193 w owner-writable files (0200)
3194 x owner-executable files (0100)
3195 A group-readable files (0040)
3196 I group-writable files (0020)
3197 E group-executable files (0010)
3198 R world-readable files (0004)
3199 W world-writable files (0002)
3200 X world-executable files (0001)
3201 s setuid files (04000)
3202 S setgid files (02000)
3203 t files with the sticky bit (01000)
3205 print *(m-1) # Files modified up to a day ago
3206 print *(a1) # Files accessed a day ago
3207 print *(@) # Just symlinks
3208 print *(Lk+50) # Files bigger than 50 kilobytes
3209 print *(Lk-50) # Files smaller than 50 kilobytes
3210 print **/*.c # All *.c files recursively starting in \$PWD
3211 print **/*.c~file.c # Same as above, but excluding 'file.c'
3212 print (foo|bar).* # Files starting with 'foo' or 'bar'
3213 print *~*.* # All Files that do not contain a dot
3214 chmod 644 *(.^x) # make all plain non-executable files publically readable
3215 print -l *(.c|.h) # Lists *.c and *.h
3216 print **/*(g:users:) # Recursively match all files that are owned by group 'users'
3217 echo /proc/*/cwd(:h:t:s/self//) # Analogous to >ps ax | awk '{print $1}'<"
3219 alias help-zshglob=H-Glob
3221 # grep for running process, like: 'any vim'
3225 if [[ -z "$1" ]] ; then
3226 echo "any - grep for process(es) by keyword" >&2
3227 echo "Usage: any <keyword>" >&2 ; return 1
3229 ps xauwww | grep -i "${grep_options[@]}" "[${1[1]}]${1[2,-1]}"
3234 # After resuming from suspend, system is paging heavily, leading to very bad interactivity.
3235 # taken from $LINUX-KERNELSOURCE/Documentation/power/swsusp.txt
3236 [[ -r /proc/1/maps ]] && \
3237 function deswap () {
3238 print 'Reading /proc/[0-9]*/maps and sending output to /dev/null, this might take a while.'
3239 cat $(sed -ne 's:.* /:/:p' /proc/[0-9]*/maps | sort -u | grep -v '^/dev/') > /dev/null
3240 print 'Finished, running "swapoff -a; swapon -a" may also be useful.'
3243 # a wrapper for vim, that deals with title setting
3245 # set this array to a set of options to vim you always want
3246 # to have set when calling vim (in .zshrc.local), like:
3247 # VIM_OPTIONS=( -p )
3248 # This will cause vim to send every file given on the
3249 # commandline to be send to it's own tab (needs vim7).
3250 if check_com vim; then
3252 VIM_PLEASE_SET_TITLE='yes' command vim ${VIM_OPTIONS} "$@"
3256 ssl_hashes=( sha512 sha256 sha1 md5 )
3258 for sh in ${ssl_hashes}; do
3259 eval 'ssl-cert-'${sh}'() {
3261 if [[ -z $1 ]] ; then
3262 printf '\''usage: %s <file>\n'\'' "ssh-cert-'${sh}'"
3265 openssl x509 -noout -fingerprint -'${sh}' -in $1
3269 function ssl-cert-fingerprints () {
3272 if [[ -z $1 ]] ; then
3273 printf 'usage: ssl-cert-fingerprints <file>\n'
3276 for i in ${ssl_hashes}
3281 function ssl-cert-info () {
3283 if [[ -z $1 ]] ; then
3284 printf 'usage: ssl-cert-info <file>\n'
3287 openssl x509 -noout -text -in $1
3288 ssl-cert-fingerprints $1
3291 # make sure our environment is clean regarding colors
3292 builtin unset -v BLUE RED GREEN CYAN YELLOW MAGENTA WHITE NO_COLOR
3294 # "persistent history"
3295 # just write important commands you always need to $GRML_IMPORTANT_COMMANDS
3296 # defaults for backward compatibility to ~/.important_commands
3297 if [[ -r ~/.important_commands ]] ; then
3298 GRML_IMPORTANT_COMMANDS=~/.important_commands
3300 GRML_IMPORTANT_COMMANDS=${GRML_IMPORTANT_COMMANDS:-${ZDOTDIR:-${HOME}}/.important_commands}
3302 [[ -r ${GRML_IMPORTANT_COMMANDS} ]] && builtin fc -R ${GRML_IMPORTANT_COMMANDS}
3304 # load the lookup subsystem if it's available on the system
3305 zrcautoload lookupinit && lookupinit
3309 # set terminal property (used e.g. by msgid-chooser)
3310 export COLORTERM="yes"
3315 #a2# Execute \kbd{du -sch}
3316 [[ -n "$GRML_NO_SMALL_ALIASES" ]] || alias da='du -sch'
3319 #a2# Execute \kbd{ls -lSrah}
3320 alias dir="command ls -lSrah"
3321 #a2# Only show dot-directories
3322 alias lad='command ls -d .*(/)'
3323 #a2# Only show dot-files
3324 alias lsa='command ls -a .*(.)'
3325 #a2# Only files with setgid/setuid/sticky flag
3326 alias lss='command ls -l *(s,S,t)'
3327 #a2# Only show symlinks
3328 alias lsl='command ls -l *(@)'
3329 #a2# Display only executables
3330 alias lsx='command ls -l *(*)'
3331 #a2# Display world-{readable,writable,executable} files
3332 alias lsw='command ls -ld *(R,W,X.^ND/)'
3333 #a2# Display the ten biggest files
3334 alias lsbig="command ls -flh *(.OL[1,10])"
3335 #a2# Only show directories
3336 alias lsd='command ls -d *(/)'
3337 #a2# Only show empty directories
3338 alias lse='command ls -d *(/^F)'
3339 #a2# Display the ten newest files
3340 alias lsnew="command ls -rtlh *(D.om[1,10])"
3341 #a2# Display the ten oldest files
3342 alias lsold="command ls -rtlh *(D.Om[1,10])"
3343 #a2# Display the ten smallest files
3344 alias lssmall="command ls -Srl *(.oL[1,10])"
3345 #a2# Display the ten newest directories and ten newest .directories
3346 alias lsnewdir="command ls -rthdl *(/om[1,10]) .*(D/om[1,10])"
3347 #a2# Display the ten oldest directories and ten oldest .directories
3348 alias lsolddir="command ls -rthdl *(/Om[1,10]) .*(D/Om[1,10])"
3350 # some useful aliases
3351 #a2# Remove current empty directory. Execute \kbd{cd ..; rmdir \$OLDCWD}
3352 alias rmcdir='cd ..; rmdir $OLDPWD || cd $OLDPWD'
3354 #a2# ssh with StrictHostKeyChecking=no \\&\quad and UserKnownHostsFile unset
3355 alias insecssh='ssh -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
3356 #a2# scp with StrictHostKeyChecking=no \\&\quad and UserKnownHostsFile unset
3357 alias insecscp='scp -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
3359 # work around non utf8 capable software in utf environment via $LANG and luit
3360 if check_com isutfenv && check_com luit ; then
3361 if check_com -c mrxvt ; then
3362 isutfenv && [[ -n "$LANG" ]] && \
3363 alias mrxvt="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit mrxvt"
3366 if check_com -c aterm ; then
3367 isutfenv && [[ -n "$LANG" ]] && \
3368 alias aterm="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit aterm"
3371 if check_com -c centericq ; then
3372 isutfenv && [[ -n "$LANG" ]] && \
3373 alias centericq="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit centericq"
3379 #f5# Backup \kbd{file_or_folder {\rm to} file_or_folder\_timestamp}
3382 local current_date=$(date -u "+%Y%m%dT%H%M%SZ")
3383 local clean keep move verbose result all to_bk
3384 setopt extended_glob
3386 while getopts ":hacmrv" opt; do
3389 c) unset move clean && (( ++keep ));;
3390 m) unset keep clean && (( ++move ));;
3391 r) unset move keep && (( ++clean ));;
3394 bk [-hcmv] FILE [FILE ...]
3395 bk -r [-av] [FILE [FILE ...]]
3396 Backup a file or folder in place and append the timestamp
3397 Remove backups of a file or folder, or all backups in the current directory
3400 -h Display this help text
3401 -c Keep the file/folder as is, create a copy backup using cp(1) (default)
3402 -m Move the file/folder, using mv(1)
3403 -r Remove backups of the specified file or directory, using rm(1). If none
3404 is provided, remove all backups in the current directory.
3405 -a Remove all (even hidden) backups.
3408 The -c, -r and -m options are mutually exclusive. If specified at the same time,
3409 the last one is used.
3411 The return code is the sum of all cp/mv/rm return codes.
3414 \?) bk -h >&2; return 1;;
3417 shift "$((OPTIND-1))"
3418 if (( keep > 0 )); then
3419 if islinux || isfreebsd; then
3420 for to_bk in "$@"; do
3421 cp $verbose -a "${to_bk%/}" "${to_bk%/}_$current_date"
3425 for to_bk in "$@"; do
3426 cp $verbose -pR "${to_bk%/}" "${to_bk%/}_$current_date"
3430 elif (( move > 0 )); then
3431 while (( $# > 0 )); do
3432 mv $verbose "${1%/}" "${1%/}_$current_date"
3436 elif (( clean > 0 )); then
3437 if (( $# > 0 )); then
3438 for to_bk in "$@"; do
3439 rm $verbose -rf "${to_bk%/}"_[0-9](#c8)T([0-1][0-9]|2[0-3])([0-5][0-9])(#c2)Z
3443 if (( all > 0 )); then
3444 rm $verbose -rf *_[0-9](#c8)T([0-1][0-9]|2[0-3])([0-5][0-9])(#c2)Z(D)
3446 rm $verbose -rf *_[0-9](#c8)T([0-1][0-9]|2[0-3])([0-5][0-9])(#c2)Z
3454 #f5# cd to directory and list files
3460 # smart cd function, allows switching to /etc when running 'cd /etc/fstab'
3462 if (( ${#argv} == 1 )) && [[ -f ${1} ]]; then
3463 [[ ! -e ${1:h} ]] && return 1
3464 print "Correcting ${1} to ${1:h}"
3471 #f5# Create Directory and \kbd{cd} to it
3473 if (( ARGC != 1 )); then
3474 printf 'usage: mkcd <new-directory>\n'
3477 if [[ ! -d "$1" ]]; then
3478 command mkdir -p "$1"
3480 printf '`%s'\'' already exists: cd-ing.\n' "$1"
3485 #f5# Create temporary directory and \kbd{cd} to it
3487 builtin cd "$(mktemp -d)"
3491 #f5# List files which have been accessed within the last {\it n} days, {\it n} defaults to 1
3492 function accessed () {
3494 print -l -- *(a-${1:-1})
3497 #f5# List files which have been changed within the last {\it n} days, {\it n} defaults to 1
3498 function changed () {
3500 print -l -- *(c-${1:-1})
3503 #f5# List files which have been modified within the last {\it n} days, {\it n} defaults to 1
3504 function modified () {
3506 print -l -- *(m-${1:-1})
3508 # modified() was named new() in earlier versions, add an alias for backwards compatibility
3509 check_com new || alias new=modified
3511 # use colors when GNU grep with color-support
3512 if (( $#grep_options > 0 )); then
3513 o=${grep_options:+"${grep_options[*]}"}
3514 #a2# Execute \kbd{grep -{}-color=auto}
3515 alias grep='grep '$o
3516 alias egrep='egrep '$o
3521 # 'translate' looks up a word in a file with language-to-language
3522 # translations (field separator should be " : "). A typical wordlist looks
3523 # like the following:
3524 # | english-word : german-translation
3525 # It's also only possible to translate english to german but not reciprocal.
3526 # Use the following oneliner to reverse the sort order:
3527 # $ awk -F ':' '{ print $2" : "$1" "$3 }' \
3528 # /usr/local/lib/words/en-de.ISO-8859-1.vok > ~/.translate/de-en.ISO-8859-1.vok
3529 #f5# Translates a word
3534 translate -l de-en $2
3537 translate -l en-de $2
3540 echo "Usage: $0 { -D | -E }"
3541 echo " -D == German to English"
3542 echo " -E == English to German"
3546 # Usage: simple-extract <file>
3547 # Using option -d deletes the original archive file.
3548 #f5# Smart archive extractor
3549 function simple-extract () {
3551 setopt extended_glob noclobber
3552 local ARCHIVE DELETE_ORIGINAL DECOMP_CMD USES_STDIN USES_STDOUT GZTARGET WGET_CMD
3554 zparseopts -D -E "d=DELETE_ORIGINAL"
3555 for ARCHIVE in "${@}"; do
3557 *(tar.bz2|tbz2|tbz))
3558 DECOMP_CMD="tar -xvjf -"
3563 DECOMP_CMD="tar -xvzf -"
3567 *(tar.xz|txz|tar.lzma))
3568 DECOMP_CMD="tar -xvJf -"
3573 DECOMP_CMD="tar --zstd -xvf -"
3578 DECOMP_CMD="lrzuntar"
3583 DECOMP_CMD="tar -xvf -"
3588 DECOMP_CMD="unrar x"
3613 DECOMP_CMD="bzip2 -d -c -"
3618 DECOMP_CMD="gzip -d -c -"
3623 DECOMP_CMD="xz -d -c -"
3628 DECOMP_CMD="zstd -d -c -"
3633 DECOMP_CMD="lrunzip -"
3638 print "ERROR: '$ARCHIVE' has unrecognized archive type." >&2
3644 if ! check_com ${DECOMP_CMD[(w)1]}; then
3645 echo "ERROR: ${DECOMP_CMD[(w)1]} not installed." >&2
3650 GZTARGET="${ARCHIVE:t:r}"
3651 if [[ -f $ARCHIVE ]] ; then
3653 print "Extracting '$ARCHIVE' ..."
3654 if $USES_STDIN; then
3655 if $USES_STDOUT; then
3656 ${=DECOMP_CMD} < "$ARCHIVE" > $GZTARGET
3658 ${=DECOMP_CMD} < "$ARCHIVE"
3661 if $USES_STDOUT; then
3662 ${=DECOMP_CMD} "$ARCHIVE" > $GZTARGET
3664 ${=DECOMP_CMD} "$ARCHIVE"
3667 [[ $? -eq 0 && -n "$DELETE_ORIGINAL" ]] && rm -f "$ARCHIVE"
3669 elif [[ "$ARCHIVE" == (#s)(https|http|ftp)://* ]] ; then
3670 if check_com curl; then
3671 WGET_CMD="curl -L -s -o -"
3672 elif check_com wget; then
3673 WGET_CMD="wget -q -O -"
3674 elif check_com fetch; then
3675 WGET_CMD="fetch -q -o -"
3677 print "ERROR: neither wget, curl nor fetch is installed" >&2
3681 print "Downloading and Extracting '$ARCHIVE' ..."
3682 if $USES_STDIN; then
3683 if $USES_STDOUT; then
3684 ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD} > $GZTARGET
3687 ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD}
3691 if $USES_STDOUT; then
3692 ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE") > $GZTARGET
3694 ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE")
3699 print "ERROR: '$ARCHIVE' is neither a valid file nor a supported URI." >&2
3706 function __archive_or_uri () {
3708 'files:Archives:_files -g "*.(#l)(tar.bz2|tbz2|tbz|tar.gz|tgz|tar.xz|txz|tar.lzma|tar|rar|lzh|7z|zip|jar|deb|bz2|gz|Z|xz|lzma)"' \
3709 '_urls:Remote Archives:_urls'
3712 function _simple_extract () {
3714 '-d[delete original archivefile after extraction]' \
3715 '*:Archive Or Uri:__archive_or_uri'
3717 compdef _simple_extract simple-extract
3718 [[ -n "$GRML_NO_SMALL_ALIASES" ]] || alias se=simple-extract
3720 #f5# Change the xterm title from within GNU-screen
3721 function xtrename () {
3723 if [[ $1 != "-f" ]] ; then
3724 if [[ -z ${DISPLAY} ]] ; then
3725 printf 'xtrename only makes sense in X11.\n'
3731 if [[ -z $1 ]] ; then
3732 printf 'usage: xtrename [-f] "title for xterm"\n'
3733 printf ' renames the title of xterm from _within_ screen.\n'
3734 printf ' also works without screen.\n'
3735 printf ' will not work if DISPLAY is unset, use -f to override.\n'
3738 print -n "\eP\e]0;${1}\C-G\e\\"
3742 # Create small urls via http://goo.gl using curl(1).
3743 # API reference: https://code.google.com/apis/urlshortener/
3746 setopt extended_glob
3748 if [[ -z $1 ]]; then
3749 print "USAGE: zurl <URL>"
3753 local PN url prog api json contenttype item
3758 # Prepend 'http://' to given URL where necessary for later output.
3759 if [[ ${url} != http(s|)://* ]]; then
3763 if check_com -c curl; then
3766 print "curl is not available, but mandatory for ${PN}. Aborting."
3769 api='https://www.googleapis.com/urlshortener/v1/url'
3770 contenttype="Content-Type: application/json"
3771 json="{\"longUrl\": \"${url}\"}"
3772 data=(${(f)"$($prog --silent -H ${contenttype} -d ${json} $api)"})
3773 # Parse the response
3774 for item in "${data[@]}"; do
3779 printf '%s\n' "$item"
3787 #f2# Find history events by search pattern and list them by date.
3788 function whatwhen () {
3790 local usage help ident format_l format_s first_char remain first last
3791 usage='USAGE: whatwhen [options] <searchstring> <search range>'
3792 help='Use `whatwhen -h'\'' for further explanations.'
3793 ident=${(l,${#${:-Usage: }},, ,)}
3794 format_l="${ident}%s\t\t\t%s\n"
3795 format_s="${format_l//(\\t)##/\\t}"
3796 # Make the first char of the word to search for case
3797 # insensitive; e.g. [aA]
3798 first_char=[${(L)1[1]}${(U)1[1]}]
3800 # Default search range is `-100'.
3802 # Optional, just used for `<first> <last>' given.
3806 printf '%s\n\n' 'ERROR: No search string specified. Aborting.'
3807 printf '%s\n%s\n\n' ${usage} ${help} && return 1
3810 printf '%s\n\n' ${usage}
3812 printf $format_l '-h' 'show help text'
3814 print 'SEARCH RANGE:'
3815 printf $format_l "'0'" 'the whole history,'
3816 printf $format_l '-<n>' 'offset to the current history number; (default: -100)'
3817 printf $format_s '<[-]first> [<last>]' 'just searching within a give range'
3818 printf '\n%s\n' 'EXAMPLES:'
3819 printf ${format_l/(\\t)/} 'whatwhen grml' '# Range is set to -100 by default.'
3820 printf $format_l 'whatwhen zsh -250'
3821 printf $format_l 'whatwhen foo 1 99'
3824 printf '%s\n%s\n\n' ${usage} ${help} && return 1
3827 # -l list results on stout rather than invoking $EDITOR.
3828 # -i Print dates as in YYYY-MM-DD.
3829 # -m Search for a - quoted - pattern within the history.
3830 fc -li -m "*${first_char}${remain}*" $first $last
3835 # mercurial related stuff
3836 if check_com -c hg ; then
3837 # gnu like diff for mercurial
3838 # http://www.selenic.com/mercurial/wiki/index.cgi/TipsAndTricks
3839 #f5# GNU like diff for mercurial
3843 for i in $(hg status -marn "$@") ; diff -ubwd <(hg cat "$i") "$i"
3846 # build debian package
3847 #a2# Alias for \kbd{hg-buildpackage}
3848 alias hbp='hg-buildpackage'
3850 # execute commands on the versioned patch-queue from the current repos
3851 [[ -n "$GRML_NO_SMALL_ALIASES" ]] || alias mq='hg -R $(readlink -f $(hg root)/.hg/patches)'
3853 # diffstat for specific version of a mercurial repository
3854 # hgstat => display diffstat between last revision and tip
3855 # hgstat 1234 => display diffstat between revision 1234 and tip
3856 #f5# Diffstat for specific version of a mercurial repos
3857 function hgstat () {
3859 [[ -n "$1" ]] && hg diff -r $1 -r tip | diffstat || hg export tip | diffstat
3862 fi # end of check whether we have the 'hg'-executable
3864 # disable bracketed paste mode for dumb terminals
3865 [[ "$TERM" == dumb ]] && unset zle_bracketed_paste
3867 # grml-small cleanups and workarounds
3869 # The following is used to remove zsh-config-items that do not work
3870 # in grml-small by default.
3871 # If you do not want these adjustments (for whatever reason), set
3872 # $GRMLSMALL_SPECIFIC to 0 in your .zshrc.pre file (which this configuration
3873 # sources if it is there).
3875 if (( GRMLSMALL_SPECIFIC > 0 )) && isgrmlsmall ; then
3880 unalias 'V' &> /dev/null
3881 unfunction vman &> /dev/null
3882 unfunction viless &> /dev/null
3883 unfunction 2html &> /dev/null
3885 # manpages are not in grmlsmall
3886 unfunction manzsh &> /dev/null
3887 unfunction man2 &> /dev/null
3891 # See https://github.com/grml/grml/issues/56
3892 if ! [[ -x ${commands[dig]} ]]; then
3893 function dig_after_all () {
3897 unfunction dig_after_all
3900 if [[ -x ${commands[dig]} ]]; then
3905 printf 'This installation does not include `dig'\'' for size reasons.\n'
3906 printf 'Try `drill'\'' as a light weight alternative.\n'
3910 if [[ -x ${commands[dig]} ]]; then
3912 zle -M 'Found `dig'\'' installed. '
3914 zle -M 'Try `drill'\'' instead of `dig'\''.'
3923 unfunction grml_status_feature
3925 ## genrefcard.pl settings
3927 ### doc strings for external functions from files
3928 #m# f5 grml-wallpaper() Sets a wallpaper (try completion for possible values)
3930 ### example: split functions-search 8,16,24,32
3931 #@# split functions-search 8
3933 ## END OF FILE #################################################################
3934 # vim:filetype=zsh foldmethod=marker autoindent expandtab shiftwidth=4