1 Install grml to harddisk:
5 Notice: You can pre-select the partition for the partition selector
6 and mbr dialogs inside grml2hd using:
7 # grml2hd /dev/hda1 -mbr /dev/hda
9 See: man grml2hd + http://grml.org/grml2hd/
11 Install grml on software RAID level 1:
13 Create /dev/md0 (and some more /dev/md* devices) first of all:
14 # cd /dev && MAKEDEV dev
17 # mdadm --create --verbose /dev/md0 --level=raid1 \
18 --raid-devices=2 /dev/hda1 /dev/hdc1
20 Finally install grml on it:
21 # SWRAID='mbr-only' grml2hd /dev/md0 -mbr /dev/md0
23 See: man grml2hd + http://grml.org/grml2hd/
25 Install grml in non interactive mode with grml2hd:
27 Adjust configuration as needed:
28 # vim /etc/grml2hd/config
32 # GRML2HD_NONINTERACTIVE=yes grml2hd
38 Use with care and only if you really know what you are doing!
40 See: man grml2hd + http://grml.org/grml2hd/
46 Deactivate error correction of zsh:
50 Run zsh-help for more information regarding zsh.
52 Disable automatic setting of title in GNU screen:
56 Set it manually e.g. via:
58 % screen -X title foobar
60 Run zsh-help for more information regarding zsh.
62 Do not use menu completion in zsh:
66 Run zsh-help for more information regarding zsh.
68 Run GNU screen with grml-configuration:
74 % screen -c /etc/grml/screenrc
76 Print out grml-version:
84 Configure mutt-ng / muttng:
88 Set up Inode-PPTP connection:
92 # grml-pptp-xdsl-students
94 Set up VPN / WLAN connection at TUG (TU Graz):
96 Set ESSID and request for ip-address via DHCP:
97 # iwconfig $DEVICE essid tug
100 Now run the main script:
103 After running the script an init script is available:
105 # /etc/init.d/vpnctug [start|stop]
107 Set up PPTP connection at VCG (Virtual Campus Graz):
117 # grml-vpn -k 2005 add 1000 192.168.20.1 192.168.20.2
121 Use encrypted files / partitions:
123 # grml-crypt <options>
129 # grml-crypt format /mnt/external1/encrypted_file /mnt/test
130 # cp big_file /mnt/test
131 # grml-crypt stop /mnt/test
135 # grml-crypt start /mnt/external1/encrypted_file /mnt/test
136 # grml-crypt stop /mnt/test
140 Change resolution of X:
142 % xrandr -s '1024x768'
144 Change resolution of framebuffer:
148 Configure newsreader slrn:
152 Configure grml system:
156 Or directly run scripts:
161 Lock screen (X / console):
165 Press ctrl-alt-x to lock a GNU screen session.
167 Change wallpaper in X:
169 % grml-wallpaper <press-tab>
171 Start X window system (XFree86 / Xorg / X.org):
173 % grml-x $WINDOWMANAGER
178 % grml-x -mode '1024x768' wmii
179 % grml-x -nosync wm-ng
181 Collect hardware information:
185 or run as root to collect some more information:
189 will generate a file named info.tar.bz2.
191 Configure hardware detection features of harddisk installation:
195 or manually edit /etc/grml/autoconfig[.small]
197 See: man grml-autoconfig
199 Bootoptions / cheatcodes / bootparams for booting grml:
201 On the grml-ISO if not running grml:
202 % less /cdrom/GRML/grml-cheatcodes.txt
205 % most /usr/share/doc/grml-docs/grml-cheatcodes.txt.gz
207 Report bugs to Debian's Bug Tracking System (BTS):
209 % reportbug --bts debian
211 or adjust /etc/reportbug.conf to your needs.
215 http://grml.org/bugs/
216 http://www.debian.org/Bugs/
218 Offline documentation:
222 Online documentation:
225 http://grml.org/docs/
226 http://wiki.grml.org/doku.php
228 Mount ntfs partition (read-write):
231 # ntfsmount /dev/hda1 /mnt/hda1
233 Overwrite specific file on an NTFS partition:
235 ntfscp /dev/hda1 /tmp/file_source path/to/file_target
237 Resize an NTFS partition:
243 ntfsresize -n -s 10G /dev/hda1 # testcase
244 ntfsresize -s 10G /dev/hda1 # testing was successfull, now really resize partition
245 cfdisk /dev/hda # delete partition hda1, create new one with 10000MB and fs-type 07 (NTFS)
247 Modify resolution for intel graphic chipsets:
253 # 915resolution 4d 1400 1050
255 Connect bluetooth mouse:
259 ... and press 'connect' button on your bluetooth device.
261 Connect bluetooth headset:
265 ... and press 'connect' button on your bluetooth device.
267 Secure delete file / directory / partition:
273 Also take a look at shred(1), sfill(1) and http://dban.sourceforge.net/
275 Use grml on Samsung X20 laptop:
277 # apt-get install grml-samsung-x20
279 See: http://www.michael-prokop.at/computer/samsung_x20.html
281 Development information regarding grml:
283 http://grml.supersized.org/
287 #grml on irc.freenode.org - http://grml.org/irc/
288 http://grml.org/contact/
290 Join the grml mailinglist:
292 http://grml.org/mailinglist/
296 http://grml.org/donations/
298 Commercial support / system administration / adjusted live-cds:
300 grml-solutions: http://grml.org/solutions/
302 Information regarding the kernel provided by grml:
304 http://grml.org/kernel/
306 SMTP command-line test tool:
312 % swaks -s $MAILSERVER -tlsc -a -au $ACCOUNT -ap $PASSWORD -f $MAILADRESSE -t $MAILADRESSE
316 NTFS related packages:
322 Modify service through init script:
329 # /etc/init.d/lvm start
333 # jstest /dev/input/js0
337 % mplayer /path/to/movie
339 Use webcam with mplayer:
341 % mplayer tv:// -tv driver=v4l:width=352:height=288:outfmt=yv12:device=/dev/video0
343 Powerful network discovery tool:
347 Grab an entire CD and compress it to Ogg/Vorbis,
348 MP3, FLAC, Ogg/Speex and/or MPP/MP+(Musepack) format:
352 Show a console session in several terminals:
356 Switch behaviour of caps lock key:
360 grep with Perl-compatible regular expressions:
364 ncp: a fast file copy tool for LANs
369 Remote (receive file):
372 utility for sorting records in complex ways:
376 a smaller, cheaper, faster SED implementation:
384 See: http://grml.org/zsh/
386 zsh reference card for grml system:
389 /usr/share/doc/grml-docs/zsh/grml-zsh-refcard.pdf.gz
393 % for i in foo* ; do mv "$i" "bar${i/foo}" ; done
395 % prename 's/foo/bar/' foo*
397 % zmv 'foo(*)' 'bar$1'
399 Test TFT / LCD display:
407 Improved grep version:
411 Grep with highlighting:
413 % grep --color=auto ...
416 Extract matches when grepping:
419 % ifconfig | grepc 'inet addr:(.*?)\s'
420 % ifconfig | glark --extract-matches 'inet addr:(.*?)\s'
422 Output text as sound:
425 % xsay # when running X and text selected via mouse
427 Adjust a grml harddisk (grml2hd) installation:
431 Get information on movie files:
433 % tcprobe -i file.avi
435 Get an overview of your image files:
437 % convert 'vid:*.jpg' thumbnails.jpg
439 List all standard defines:
441 % gcc -dM -E - < /dev/null
443 Send a mail as reminder:
445 echo "mail -s 'check TODO-list' $MAILADDRESS < /dev/null" | at 23:42
447 ncurses-based presentation tool:
451 See: man tpp and /usr/share/doc/tpp/examples/
453 Use ICQ / Jabber / Yahoo! / AIM / MSN /... on command line:
457 Use IRC on command line:
463 % vimdiff file1 file2
469 Moving between diffs:
479 Hardware monitoring without kernel dependencies:
483 Install grml-iso to usb-stick:
485 % grml2usb grml.iso /mount/point
487 Use mplayer on framebuffer console:
489 % mplayer -vo fbdev ...
491 Use links2 on framebuffer console:
493 % links2 -driver fb ...
495 Switch language / keyboard:
497 * use the bootparam lang to set language environment ($LANG, $LC_ALL, $LANGUAGE)
498 * use the bootparams keyboard / xkeyboard to activate specific keyboard layout
499 Usage example: 'grml lang=us keyboard=de xkeyboard=de'
501 Or run one of the following commands:
505 # loadkeys i386/qwertz/de-latin1-nodeadkeys.kmap.gz # console
508 Switch setting of caps-control key (switch between ctrl + shift) on keyboard:
512 Mount usb device / usb stick:
514 % mount /mnt/external1 # corresponds to /dev/sda1
516 % mount /mnt/external # corresponds to /dev/sda
518 Install Sun Java packages:
520 Download j2re.bin-file from http://java.sun.com/downloads/index.html and run
522 # apt-get install java-package
523 # fakeroot make-jpkg j2re-*.bin
524 # dpkg -i sun-j2re*.deb
525 # update-alternatives --config java
529 ddrescue is an improved version of dd which tries to read and
530 if it fails it will go on with the next sectors, where tools
537 How to make an audio file (e.g. Musepack format) out of a DVD track:
539 % mkfifo /tmp/fifo.wav
540 % mppenc /tmp/fifo.wav track06.mpc &
541 % mplayer -vo null -vc null -ao pcm:fast:file=/tmp/fifo.wav -dvd-device /dev/dvd dvd://1 -chapter 6-6
543 Adjust the mppenc line with the encoder you would like to use,
544 for example 'oggenc -o track06.ogg /tmp/fifo.wav' for ogg files.
548 % mplayer -vo null -dumpaudio -dumpfile track06.raw -aid N -dvd-device /dev/dvd dvd://1 -chapter 6-6
549 to extract audio without processing, where 'N' is the corresponding audio channel (see 'man mplayer')
551 Usage example for getting a PCM/wave file from audio channel 128:
552 % mplayer -vo null -vc null -ao pcm:fast:file=track06.wav -aid 128 -dvd-device /dev/dvd dvd://6
554 Create simple chroot:
556 # make_chroot_jail $USERNAME
558 Convert DOS formated file to unix format:
560 sed 's/.$//' dosfile > unixfile # assumes that all lines end with CR/LF
561 sed 's/^M$//' dosfile > unixfile # in bash/tcsh, press Ctrl-V then Ctrl-M
562 sed 's/\x0D$//' dosfile > unixfile # gsed 3.02.80, but top script is easier
563 awk '{sub(/\r$/,"");print}' # assumes EACH line ends with Ctrl-M
564 gawk -v BINMODE="w" '1' infile >outfile # in DOS environment; cannot be done with
565 # DOS versions of awk, other than gawk
566 tr -d \r < dosfile > unixfile # GNU tr version 1.22 or higher
567 tr -d '\015' < dosfile > unixfile # use octal value for "\r" (see man ascii)
568 tr -d '[\015\032]' < dosfile > unixfile # sometimes ^Z is appended to DOS-files
569 vim -c ":set ff=unix" -c ":wq" file # convert using vim
570 vim -c "se ff=dos|x" file # ... and even shorter ;)
571 recode ibmpc..lat1 file # convert using recode
572 echo -e "s/\r//g" > dos2unix.sed; sed -f dos2unix.sed < dosfile > unixfile
574 Save live audio stream to file:
576 % mplayer -ao pcm:file=$FILE $URL
578 Save live stream to file:
580 % mplayer -dumpfile $FILE -dumpstream $STREAM
584 % mencoder mms://$URL -o $FILE -ovc copy -oac copy
588 % mimms mms://file.wmv
594 % avimerge -i *.avi -o blub.avi
598 % cat *.mpg > blub.mpg
602 % mencoder file1.wmv -ovc lavc -oac lavc -ofps 25 -srate 48000 -mc 0 -noskip -forceidx -o file1.avi
603 % mencoder file2.wmv -ovc lavc -oac lavc -ofps 25 -srate 48000 -mc 0 -noskip -forceidx -o file2.avi
604 % avimerge -i file1.avi file2.avi -o blub.avi
606 Display MS-Word file:
608 % strings file.doc | fmt | less
614 Convert MS-Word file to postscript:
616 % antiword -p a4 file.doc > file.ps
618 Convert manual to postscript:
620 % zcat /usr/share/man/man1/zsh.1.gz | groff -man > zsh.1.ps
622 % man -t zsh > zsh.ps
626 % dd if=/dev/mem bs=1k skip=768 count=256 2>/dev/null | strings -n 8
628 Read HTTP via netcat:
630 echo "GET / HTTP/1.0\r\n\r\n" | netcat $DOMAIN 80
632 Get X ressources for specific program:
634 % xrdb -q |grep -i xterm
636 Get windowid of specific X-window:
638 % xwininfo -int | grep "Window id:" | cut -d ' ' -f 4
640 Get titel of specific X-window:
644 check locale - LC_MESSAGES:
646 % locale -ck LC_MESSAGES
648 Create random password:
652 % dd if=/dev/urandom bs=14 count=1 | hexdump | cut -c 9-
654 Get tarballs of various Linux Kernel trees:
657 to get the current stable 2.6 release
660 to get a list of all supported trees
662 Transfer your SSH public key to another host:
664 % ssh-keygen # ssh-keygen / ssh-key-gen: if you don't have a key yet
666 % ssh-copy-id -i ~/.ssh/id_rsa.pub user@remote-system
668 % cat $HOME/.ssh/id_rsa.pub | ssh user@remote-system 'cat >> .ssh/authorized_keys'
670 Update /etc/fstab entries:
674 See "man grml-rebuildfstab" for more details about
675 generation of /etc/fstab (including stuff like
676 fs LABELs / UUIDs,...).
678 Fetch and potentially change SCSI device parameters:
684 reclaim disk space by linking identical files together:
688 Find and remove duplicate files:
692 Perform layer 2 attacks:
698 Guess PC-type hard disk partitions / partition table:
702 Perform a standard scan:
705 Write back the guessed table:
706 # gpart -W /dev/ice /dev/ice
708 Develop, test and use exploit code with the Metasploit Framework:
711 wget http://spool.metasploit.com/releases/framework-3.2.tar.gz
712 unp framework-3.2.tar.gz
716 Useful documentation:
718 % w3m /usr/share/doc/Debian/reference/reference.en.html
720 % xpdf =(zcat /usr/share/doc/Debian/reference/reference.en.pdf.gz)
722 http://grml.org/docs/ grml Documentation
723 http://wiki.grml.org/ grml Wiki
724 http://www.debian.org/doc/ Debian Documentation
725 http://wiki.debian.org/ Debian Wiki
726 http://www.gentoo.org/doc/en/ Gentoo Documentation
727 http://gentoo-wiki.com/ Gentoo Wiki
728 http://www.tldp.org/ The Linux Documentation Project
732 % fortune debian-hints
736 % fortune debian-hints
737 % dpkg -L funny-manpages
739 Backup master boot record (MBR):
741 # dd if=/dev/ice of=/tmp/backup_of_mbr bs=512 count=1
743 Backup partition table:
745 # sfdisk -d /dev/hda > hda.out
747 Restore partition table:
749 # sfdisk /dev/hda < hda.out
751 Clone disk via network using netcat:
754 # nc -vlp 30000 > hda1.img
756 # dd if=/dev/hda1 | nc -vq 0 192.168.1.2 30000
758 Adjust blocksize (dd's option bs=...) and include 'gzip -c'
761 # dd if=/dev/hda1 bs=32M | gzip -c | nc -vq 0 192.168.1.2 30000
763 Backup specific directories via cpio and ssh:
765 # for f in directory_list; do find $f >> backup.list done
766 # cpio -v -o --format=newc < backup.list | ssh user@host "cat > backup_device"
770 This one uses CPU cycles on the remote server to compare the files:
771 # ssh target_address cat remotefile | diff - localfile
772 # cat localfile | ssh target_address diff - remotefile
774 This one uses CPU cycles on the local server to compare the files:
775 # ssh target_address cat <localfile "|" diff - remotefile
777 Useful tools for cloning / backups:
779 * dd: convert and copy a file
780 * dd_rescue: copies data from one file (or block device) to another
781 * pcopy: a replacement for dd
782 * partimage: back up and restore disk partitions
783 * dirvish: Disk based virtual image network backup system
784 * devclone: in-place filesystem conversion -- device cloning
785 * ntfsclone: efficiently clone, image, restore or rescue an NTFS
786 * dump: ext2/3 filesystem backup
787 * udpcast: multicast file transfer tool
788 * cpio: copy files to and from archives
789 * pax: read and write file archives and copy directory hierarchies
790 * netcat / ssh / tar / gzip / bzip2: additional helper tools
792 Use grml as a rescue system:
796 * dd: convert and copy a file
797 * ddrescue: copies data from one file or block device to another
798 * partimage: Linux/UNIX utility to save partitions in a compressed image file
799 * cfdisk: Partition a hard drive
800 * nparted: Newt and GNU Parted based disk partition table manipulator
801 * parted-bf: The GNU Parted disk partition resizing program, small version
802 * testdisk: Partition scanner and disk recovery tool
803 * gpart: Guess PC disk partition table, find lost partitions
807 * e2fsprogs: ext2 file system utilities and libraries
808 * e2tools: utilities for manipulating files in an ext2/ext3 filesystem
809 * e2undel: Undelete utility for the ext2 file system
810 * ext2resize: an ext2 filesystem resizer
811 * recover: Undelete files on ext2 partitions
815 * reiser4progs: administration utilities for the Reiser4 filesystem
816 * reiserfsprogs: User-level tools for ReiserFS filesystems
820 * xfsdump: Administrative utilities for the XFS filesystem
821 * xfsprogs: Utilities for managing the XFS filesystem
825 * jfsutils: utilities for managing the JFS filesystem
829 * ntfsprogs: tools for doing neat things in NTFS partitions from Linux
830 * salvage-ntfs: free NTFS data recovery tools
831 * scrounge-ntfs: data recovery program for NTFS file systems
832 * ntfsresize: resize ntfs partitions
834 Get ASCII value of a character with zsh:
836 % char=N ; print $((#char))
838 Convert a collection of mp3 files to wave or cdr using zsh:
840 % for i (./*.mp3){mpg321 --w - $i > ${i:r}.wav}
842 Convert images (foo.gif to foo.png) using zsh:
844 % for i in **/*.gif; convert $i $i:r.png
846 Remove all "non txt" files using zsh:
850 Remote Shell Using SSH:
853 % ssh -NR 3333:localhost:22 user@yourhost
856 % ssh user@localhost -p 3333
858 Reverse Shell with Netcat:
861 % netcat -v -l -p 3333 -e /bin/sh
864 % netcat 192.168.0.1 3333
866 Reverse Shell via SSH:
868 local host (inside the network):
869 % ssh -NR 1234:localhost:22 remote_host
871 remote host (outside the network):
872 % ssh localhost -p 1234
874 Remove empty directories with zsh:
876 % rmdir ./**/*(/od) 2> /dev/null
878 Find all the empty directories in a tree with zsh:
882 Find all files without a valid owner and change ownership with zsh:
884 % chmod user /**/*(D^u:${(j.:u:.)${(f)"$(</etc/passwd)"}%%:*}:)
886 Display the 5-10 last modified files with zsh:
888 % print -rl -- /path/to/dir/**/*(D.om[5,10])
890 Find and list the ten newest files in directories and subdirs (recursive) with zsh:
892 % print -rl -- **/*(Dom[1,10])
894 Find most recent file in a directory with zsh:
896 % setopt dotglob ; print directory/**/*(om[1])
898 Tunnel all traffic through an external server:
900 % ssh -ND 3333 username@external.machine
902 Then set the SOCKS4/5 proxy to localhost:3333.
903 Check whether it's working by surfing e.g. to checkip.dyndns.org
905 Tunnel everything through SSH via tsocks:
907 set up the SSH proxy on the client side:
909 % ssh -ND 3333 user@remote.host.example.com
911 Adjust /etc/tsocks.conf afterwards (delete all other lines):
916 For programs who natively support proxying connections (e.g. Mozilla
917 Firefox) you can now set the proxy address to localhost port 3333.
919 All other programs which's connections you want to tunnel through your
920 external host are prefixed with tsocks, e.g.:
922 % tsocks netcat example.com 80
923 % tsocks irssi -c irc.quakenet.eu.org -p 6667
925 If you call tsocks without parameters it executes a shell witht the
926 LD_PRELOAD environment variable already set and exported.
928 smartctl - control and monitor utility for harddisks using Self-Monitoring,
929 Analysis and Reporting Technology (SMART):
931 # smartctl --all /dev/ice
933 If you want to use smartctl on S-ATA (sata) disks use:
935 # smartctl -d ata --all /dev/sda
938 # smartctl -t offline /dev/ice
941 # smartctl -t short /dev/ice
943 Display results of test:
944 # smartctl -l selftest /dev/ice
946 Query device information:
947 # smartctl -i /dev/ice
949 Mount a BSD / Solaris partition:
951 # mount -t ufs -o ufstype=ufs2 /dev/hda1 /mnt/hda1
953 Use ufstype 44bsd for FreeBSD, NetBSD, OpenBSD (read-write).
954 Use ufstype ufs2 for >= FreeBSD 5.x (read-only).
955 Use ufstype sun for SunOS (Solaris) (read-write).
956 Use ufstype sunx86 for SunOS for Intel (Solarisx86) (read-write).
958 See /usr/share/doc/linux-doc-$(uname -r)/Documentation/filesystems/ufs.txt.gz
961 Read BIOS (and or BIOS) password:
963 # dd if=/dev/mem bs=512 skip=2 count=1 | hexdump -C | head
965 Clone one of the kernel trees via git:
967 git clone rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
968 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
969 This path defines the tree. See http://kernel.org/git/ for an overview.
971 Mount filesystems over ssh protocol:
973 % sshfs user@host:/remote_dir /mnt/test
977 % fusermount -u /mnt/test
979 (Notice: requires fuse kernel module)
981 Install Gentoo using grml:
983 See http://www.gentoo.org/doc/en/altinstall.xml
985 Install (plain) Debian (sarge release) via grml:
987 Assuming you want to install Debian to sda1:
989 mkfs.ext3 /dev/sda1 # make an ext3 filesystem on /dev/sda1
990 mount -o rw,suid,dev /dev/sda1 /mnt/test # now mount the new partition
991 debootstrap sarge /mnt/test ftp://ftp.tugraz.at/mirror/debian # get main packages from a debian-mirror
992 chroot /mnt/test /bin/bash # let's chroot into the new system
993 mount -t devpts none /dev/pts # ...otherwise running base-config might fail ("Terminated" or "openpty failed")
994 mount -t proc none /proc # make sure we also have a mounted /proc
995 base-config # now configure some main settings
996 vi /etc/mkinitrd/mkinitrd.conf # adjust $ROOT (to /dev/sda1) for your new partition, autodetection will fail in chroot
997 cd /dev ; ./MAKEDEV generic # make sure we have all necessary devices for lilo
998 apt-get install lilo linux-image-2.6.12-1-386 # install lilo and a kernel which fits your needs
999 cp /usr/share/doc/lilo/examples/conf.sample /etc/lilo.conf # let's use a template
1000 vi /etc/lilo.conf && lilo # adjust the file for your needs and run lilo afterwards
1001 umount /proc ; umount /dev/pts # we do not need them any more
1002 exit # now leave chroot
1003 cp /etc/hosts /etc/fstab /mnt/test/etc/ # you might want to take the existing files...
1004 cp /etc/network/interfaces /mnt/test/etc/network/ # ...from the running grml system for your new system
1005 umount /mnt/test && reboot # unmount partition and reboot...
1007 See also: http://www.debian.org/releases/stable/i386/apcs04.html.en
1008 Avoid all of the above steps - use grml-debootstrap(8) instead!
1010 Install (plain) Debian (etch release) via grml
1012 Assuming you want to install Debian to sda1:
1014 mkfs.ext3 /dev/sda1 # make an ext3 filesystem on /dev/sda1
1015 mount -o rw,suid,dev /dev/sda1 /mnt/test # now mount the new partition
1016 debootstrap etch /mnt/test ftp://ftp.tugraz.at/mirror/debian # get main packages from a debian-mirror
1017 chroot /mnt/test /bin/bash # let's chroot into the new system
1018 mount -t proc none /proc # make sure we have a mounted /proc
1019 apt-get install locales console-data # install locales
1020 dpkg-reconfigure locales console-data # adjust locales to your needs
1021 apt-get install vim most zsh screen less initrd-tools file grub \
1022 usbutils pciutils bzip2 sysfsutils dhcp3-client resolvconf \
1023 strace lsof w3m # install useful software
1024 apt-get install linux-headers-2.6-686 linux-image-686 # install current kernel
1026 echo "127.0.0.1 localhost" > /etc/hosts # adjust /etc/hosts and network:
1027 cat >> /etc/network/interfaces << EOF
1028 iface lo inet loopback
1029 iface eth0 inet dhcp
1034 ln -sf /usr/share/zoneinfo/Europe/Vienna /etc/localtime # adjust timezone and /etc/fstab:
1035 cat >> /etc/fstab << EOF
1036 sysfs /sys sysfs auto 0 0
1037 proc /proc proc defaults 0 0
1038 /dev/sda1 / ext3 defaults,errors=remount-ro 0 1
1039 /dev/sda2 none swap sw 0 0
1040 /dev/cdrom /mnt/cdrom0 iso9660 ro,user,noauto 0 0
1042 passwd # set password of user root
1044 mkdir /boot/grub # setup grub
1045 cp /usr/share/doc/grub/examples/menu.lst /boot/grub
1046 cat >> /boot/grub/menu.lst << EOF
1047 title Debian Etch, kernel 2.6.18-3-686 (on /dev/sda1)
1049 kernel /boot/vmlinuz-2.6.18-3-686 root=/dev/sda1 ro
1050 initrd /boot/initrd.img-2.6.18-3-686
1052 vim /boot/grub/menu.lst # adjust grub configuration to your needs
1053 cd /dev && MAKEDEV generic # create default devices
1054 cp -i /usr/lib/grub/i386-pc/* /boot/grub/ # copy stage-files to /boot/grub/
1055 grub install # now install grub, run in grub-cmdline following commands:
1059 umount -a # unmount all filesystems in chroot and finally:
1060 exit # exit the chroot and:
1063 If you want to use lilo instead of grub take a look at
1064 /usr/share/doc/lilo/examples/conf.sample or use the following template:
1066 cat > /etc/lilo.conf << EOF
1067 # This allows booting from any partition on disks with more than 1024 cylinders.
1070 # Specifies the boot device
1073 # Specifies the device that should be mounted as root.
1076 # use Debian on software raid:
1077 # raid-extra-boot=mbr-only
1085 image=/boot/vmlinuz-2.6.18-grml
1089 initrd=/boot/initrd.img-2.6.18-grml
1092 See also: http://www.debian.org/releases/stable/i386/apcs04.html.en
1093 Avoid all of the above steps - use grml-debootstrap(8) instead!
1095 Convert files from Unicode / UTF-8 to ISO:
1097 % iconv -c -f utf8 -t iso-8859-15 < utffile > isofile
1101 % iconv -f iso-8859-15 -t utf8 < isofile > utffile
1103 Assign static setup for network cards (eth0 and eth1) via udev:
1105 First method - manual:
1106 ~~~~~~~~~~~~~~~~~~~~~~
1107 Get information for SYSFS address:
1108 # udevinfo -a -p /sys/class/net/eth0/ | grep address
1110 Then create udev rules:
1111 # cat /etc/udev/network.rules
1113 KERNEL=="eth*", SYSFS{address}=="00:00:00:00:00:01", NAME="wlan0"
1114 KERNEL=="eth*", SYSFS{address}=="00:00:00:00:00:02", NAME="lan0"
1115 # do not match eth* drivers but also e.g. firewire stuff:
1116 ACTION=="add", SUBSYSTEM=="net", SYSFS{address}=="00:00:00:00:00:03", NAME="1394"
1118 Now activate the rules:
1119 # cd /etc/udev/rules.d/ && ln -s ../network.rules z35_network.rules
1121 Unload the drivers, restart udev and load the drivers again to activate
1124 Second method - automatic:
1125 ~~~~~~~~~~~~~~~~~~~~~~~~~~
1126 Run /lib/udev/write_net_rules shipped with recent udev versions:
1128 # INTERFACE=wlan1 /lib/udev/write_net_rules 00:00:00:00:00:04
1130 This command will create /etc/udev/rules.d/z25_persistent-net.rules containing:
1132 SUBSYSTEM=="net", DRIVER=="?*", SYSFS{address}=="00:00:00:00:00:04", NAME=wlan1
1134 See /usr/share/doc/udev/writing_udev_rules/index.html for more information.
1136 Change the suffix from *.sh to *.pl using zsh:
1139 % zmv -W '*.sh' '*.pl'
1141 Generate SSL certificate:
1143 Create self signed certificate (adjust /etc/ssl/openssl.cnf if necessary):
1144 # openssl req -x509 -newkey rsa:1024 -keyout keyfile -out certfile -days 9999 -nodes
1147 # openssl x509 -in certfile -text
1149 Verify against CA certificate:
1150 # openssl verify -CAfile cacert.crt -verbose -purpose sslserver
1152 Generate 2048bit RSA-key:
1153 # openssl req -new -x509 -keyout pub-sec-key.pem -out pub-sec-key.pem -days 365 -nodes
1155 As before but add request to existing key pub-sec-key.pem:
1156 # openssl req -new -out request.pem -keyin pub-sec-key.pem
1158 Show request request.pem:
1159 # openssl req -text -noout -in request.pem
1161 Verify signature of request request.pem:
1162 # openssl req -verify -noout -in request.pem
1164 Generate SHA1 fingerprint (modulo key) of request.pem:
1165 # openssl req -noout -modulus -in request.pem | openssl sha1 -c
1167 Generate 2048bit RSA-key and put it to pub-sec-key.pem. Save self signed certificate in self-signed-certificate.pem:
1168 # openssl req -x509 -days 365 -newkey rsa:2048 -out self-signed-certificate.pem -keyout pub-sec-key.pem
1170 As before but create self signed certificate based on existing key pub-sec-key.pem:
1171 # openssl req -x509 -days 365 -new -out self-signed-certificate.pem -key pub-sec-key.pem
1173 Generate new request out of existing self signed certificate:
1174 # openssl x509 -x509toreq -in self-signed-certificate.pem -signkey pub-sec-key.pem -out request.pem
1176 Display certificate self-signed-certificate.pem in plaintext:
1177 # openssl x509 -text -noout -md5 -in self-signed-certificate.pem
1179 Check self signed certificate:
1180 # openssl verify -issuer_checks -CAfile self-signed-certificate.pem self-signed-certificate.pem
1182 Estable OpenSSL-connection using self-signed-certificate.pem and display certificate:
1183 # openssl s_client -showcerts -CAfile self-signed-certificate.pem -connect www.example.com:443
1185 Generate ssl-certificate for use with apache2:
1187 export RANDFILE=/dev/random
1188 mkdir /etc/apache2/ssl/
1189 openssl req $@ -new -x509 -days 365 -nodes -out /etc/apache2/ssl/apache.pem -keyout /etc/apache2/ssl/apache.pem
1190 chmod 600 /etc/apache2/ssl/apache.pem
1192 Also take a look at make-ssl-cert (debconf wrapper for openssl):
1194 # /usr/sbin/make-ssl-cert /usr/share/ssl-cert/ssleay.cnf /etc/apache2/apache.pem
1196 and mod-ssl-makecert (utility to create SSL certificates in /etc/apache/ssl.*/).
1198 Change Windows NT password(s):
1200 # mount -o rw /mnt/hda1
1201 # cd /mnt/hda1/WINDOWS/system32/config/
1202 # chntpw SAM SECURITY system
1204 Notice: if mounting the partition read-write did not work (check syslog!)
1205 try using mount.ntfs-3g instead: mount.ntfs-3g /dev/hda1 /mnt/hda1
1207 (Be careful with deactivating syskey!)
1209 glark - replacement for grep written in Ruby:
1211 A replacement for (or supplement to) the grep family, glark offers:
1212 Perl compatible regular expressions, highlighting of matches,
1213 context around matches, complex expressions and automatic exclusion
1218 % glark -y keyword file # display only the region that matched, not the entire line
1219 % glark -o format print *.h # search for either "printf" or "format"
1221 More information: man glark
1223 Find CD burning device(s):
1225 General information on CD-ROM:
1226 % cat /proc/sys/dev/cdrom/info
1228 Scan using ATA Packet specific SCSI transport:
1229 # cdrecord -dev=ATA -scanbus
1230 # cdrecord-prodvd -s -scanbus dev=ATA
1232 Get specific information for /dev/ice:
1233 # cdrecord dev=/dev/ice -scanbus
1235 Create devices in /dev on udev:
1237 For example create md devices (/dev/md0, /dev/md1,...):
1238 # cd /dev ; WRITE_ON_UDEV=1 ./MAKEDEV md
1240 Identify network device (NIC):
1242 # ethtool -i $DEVICE
1244 Show NIC statistics:
1246 # ethtool -S $DEVICE
1248 If your NIC shows some aging signs, you may want to be sure:
1250 # ethtool -t $DEVICE
1252 Disable TCP/UDP checksums:
1254 # ethtool -K $DEVICE tx off
1256 grml2hd seems to hang? Getting Squashfs errors? Problems while booting?
1258 Switch to tty12 and take a look at the syslog. If you see something like:
1260 SQUASHFS error: zlib_fs returned unexpected result 0x........
1261 SQUASHFS error: Unable to read cache block [.....]
1262 SQUASHFS error: Unable to read inode [.....]
1264 your ISO/CD-ROM very probably is not ok. Verify it via booting with grml testcd.
1265 Check your CD low-level via running:
1267 # readcd -c2scan dev=/dev/cdrom
1269 If the medium really is ok and it still fails try to boot with deactivated DMA
1270 via using grml nodma at the bootprompt.
1272 Write a Microsoft compatible boot record (MBR) using ms-sys
1274 Write a Windows 2000/XP/2003 MBR to a device:
1276 # ms-sys -m /dev/ice
1278 Notice: grab ms-sys from http://ms-sys.sourceforge.net/ - demo:
1280 wget http://surfnet.dl.sourceforge.net/sourceforge/ms-sys/ms-sys-2.1.3.tgz
1281 unp ms-sys-2.1.3.tgz
1286 Use a Vodafone 3G Datacard (UMTS) with Linux:
1288 Plug in your vodafone card and check in syslog whether the appropriate
1289 (probably /dev/ttyUSB0 or /dev/noz0) has been created. If so run:
1292 # wvdial --config /etc/wvdial.conf.umts $PROFILE
1295 # gcom -d /dev/ttyUSB0
1296 # wvdial --config /etc/wvdial.conf.umts a1usb
1299 # wvdial --config /etc/wvdial.conf.umts tmnozomi
1302 # wvdial --config /etc/wvdial.conf.umts dreiusb
1304 If you receive invalid DNS nameservers when connecting, like:
1307 --> primary DNS address 10.11.12.13
1308 --> secondary DNS address 10.11.12.14
1310 just provide a working nameserver to resolvconf via:
1312 # echo "nameserver 80.120.17.70" | resolvconf -a ppp0
1314 Notice: some vodafone cards require the nozomi driver (run 'modprobe nozomi' on
1315 your grml system), some other ones require the sierra driver (run
1318 If your device isn't supported by usbserial yet, manually provide vendor and
1319 product ID when loading the usbserial module. Usage example:
1323 Bus 004 Device 008: ID 1199:6813 Sierra Wireless, Inc.
1325 # modprobe usbserial vendor=0x1199 product=0x6813
1327 To get a list of available providers execute:
1329 # gcom -s -d /dev/ttyUSB0 /usr/share/doc/gcom/examples/operator
1331 hdparm - get/set hard disk parameters
1333 Display the identification info that was obtained from the drive at boot time,
1335 # hpdarm -i /dev/ice
1337 Request identification info directly from the drive:
1338 # hpdarm -I /dev/ice
1340 Perform timings of device + cache reads for benchmark and comparison purposes:
1341 # hdparm -tT /dev/ice
1343 bonnie++ - program to test hard drive performance.
1345 # mkdir /mnt/benchmark
1346 # mount /dev/ice /mnt/benchmark
1347 # chmod go+w /mnt/benchmark
1348 # bonnie -u grml -d /mnt/benchmark -s 2000M
1350 Use gizmo with a bluetooth headset:
1352 % DEVICE="/dev/dsp$(awk '/- BT Headset/ {print $1}' /proc/asound/cards)"
1353 % gizmo --mic $DEVICE --speaker $DEVICE
1355 Scan a v4l device for TV stations:
1357 % scantv -c /dev/video0 -C /dev/vbi0 -o ~/.xawtv
1359 Then running xawtv should work:
1363 Run apt-get with timeout of 3 seconds:
1365 # apt-get -o acquire::http::timeout=3 update
1367 Debian GNU/Linux device driver check page
1369 % $BROWSER http://kmuto.jp/debian/hcl/index.cgi
1371 Use dd with status line:
1373 # dd if=/dev/ice conv=noerror,notrunc,sync | buffer -S 100k | dd of=/tmp/file
1375 Generate a 512k file of random data with status bar:
1377 % dd if=/dev/random bs=1024 count=512 | bar -s 512k -of ./random
1379 Install Grub instead of lilo on grml installation (grml2hd):
1384 adjust grub's configuration file menu.lst:
1385 # $EDITOR /boot/grub/menu.lst
1387 now install grub (usage example for /dev/sda1):
1392 Install Ubuntu using grml:
1394 See https://wiki.ubuntu.com/Installation/FromKnoppix
1396 Resize ext2 / ext3 partition:
1398 # tune2fs -O '^has_journal' /dev/iceX # disable journaling
1399 # fsck.ext2 -v -y -f /dev/iceX # check the filesystem
1400 # resize2fs -p /dev/iceX $SIZE # resize it (adjust $SIZE)
1401 # fdisk /dev/ice # adjust partition in partition table
1402 # fsck.ext2 -v -y -f /dev/iceX # check filesystem again
1403 # resize2fs -p /dev/iceX # resize it to maximum
1404 # tune2fs -j /dev/iceX # re-enable journal
1406 Tune ext2 / ext3 filesystem:
1408 Check partition first:
1410 # tune2fs -l /dev/iceX
1412 If you don't see dir_index in the list, then enable it:
1414 # tune2fs -O dir_index /dev/iceX
1416 Now run e2fsck with the -D option to have the directories optimized:
1418 # e2fsck -D /dev/iceX
1420 Notice: since e2fsprogs (1.39-1) filesystems are created with
1421 directory indexing and on-line resizing enabled by default.
1423 Search for printers via network:
1425 # pconf_detect -m NETWORK -i 192.168.0.1/24
1427 Mount a remote directory via webdav (e.g. Mediacenter of GMX):
1429 # mount -t davfs https://mediacenter.gmx.net/ /mnt/test
1431 System-Profiling using oprofile:
1436 # opcontrol --setup --no-vmlinux --event=CPU_CLK_UNHALTED:500000:0:1:1 --separate=library
1441 Now $DO_SOME_TASKS...
1444 # opcontrol --shutdown
1446 Then take a look at the reports using something like e.g.:
1447 # opreport -t 0.5 --exclude-dependent
1448 # opreport -t 0.5 /path/to/executable_to_check
1449 # opannotate -t 0.5 --source --assembly
1451 Install ATI's fglrx driver for Xorg / X.org:
1453 Usually there already exist drivers for the grml-system:
1454 # apt-get update ; apt-get install fglrx-driver fglrx-kernel-`uname -r`
1456 After installing adjust xorg.conf via running:
1457 # aticonfig --initial --input=/etc/X11/xorg.conf
1459 For more information take a look at http://wiki.grml.org/doku.php?id=ati
1461 Install nvidia driver for Xorg / X.org:
1463 Usually there already exist drivers for the grml-system:
1464 # apt-get update ; apt-get install nvidia-glx nvidia-kernel-`uname -r`
1466 Then switch from module nv to nvidia:
1468 # sed -i 's/Driver.*nv.*/Driver "nvidia"/' /etc/X11/xorg.conf
1470 glxgears - a GLX demo that draws three rotating gears
1472 To print frames per second (fps) use:
1473 % glxgears -printfps
1475 You forgot to boot with 'grml noeject noprompt' to avoid
1476 ejecting and prompting for CD removal when rebooting/halting
1487 If you want to avoid only the prompting part, run:
1495 Mount wikipedia local via fuse:
1497 Adjust configuration:
1498 % cat ~/.wikipediafs/config.xml
1501 <article-cache-time>300</article-cache-time>
1505 <dirname>wikipedia-de</dirname>
1506 <host>de.wikipedia.org</host>
1507 <basename>/w/index.php</basename>
1510 <dirname>wikipedia-en</dirname>
1511 <host>en.wikipedia.org</host>
1512 <basename>/w/index.php</basename>
1517 Mount it (/wiki must exist of course):
1518 % mount.wikipediafs /wiki
1519 % cat /wiki/wikipedia-en/Cat
1522 % fusermount -u /wiki
1524 Remote notification on X via osd (on screen display):
1526 Start osd_server.py at your local host (listens on port 1234 by default):
1529 Then login to a $REMOTEHOST
1530 % ssh -R 1234:localhost:1234 $REMOTEHOST
1532 Now send the text to your local display via running something like:
1533 % echo "text to send" | nc localhost 1234
1535 Very useful when you are waiting for a long running job
1536 but want to do something else in the meanwhile:
1538 % ./configure && make && echo "finished compiling" | netcat localhost 1234
1540 You can use this in external programs as well of course. Examples:
1542 Use osd in centericq:
1544 % cat ~/.centericq/external
1553 if [ -x /usr/bin/socat -a -x /bin/netcat ] ; then
1554 CONTACT_CUSTOM_NICK=$(cat ${CONTACT_INFODIR}/info | head -n 46 | tail -n 1)
1555 osd_msg="*** CenterICQ: new ${EVENT_NETWORK} ${EVENT_TYPE} from ${CONTACT_CUSTOM_NICK} ***"
1556 if echo | socat - TCP4:localhost:1234 &>/dev/null ; then
1557 echo "${osd_msg}" | netcat localhost 1234
1561 Use it in the IRC console client irssi via running:
1565 You can even activate the port forwarding by default globally:
1570 RemoteForward 1234 127.0.0.1:1234
1573 Notice: if you get 'ABORT: Requested font not found' make sure the
1574 requested font is available, running 'LANG=C LC_ALL=C osd_server.py...'
1577 Avoid automatical startup of init scripts via invoke-rc.d:
1579 First of all make sure the package policyrcd-script-zg2 (which
1580 provides the /usr/sbin/policy-rc.d interface) is installed.
1582 In policyrcd-script-zg2's configuration file named
1583 /etc/zg-policy-rc.d.conf the script /usr/sbin/grml-policy-rc.d is
1584 defined as the interface for handling invoke-rc.d's startup policy.
1586 grml-policy-rc.d can be configure via /etc/policy-rc.d.conf. By
1587 default you won't notice any differences to Debian's default
1588 behaviour, except that invoke-rc.d won't be executed if a chroot has
1589 been detected (detection: /proc is missing).
1591 If you want to disable automatical startup of newly installed packages
1592 (done via the invoke-rc.d mechanism) just set EXITSTATUS to '101' in
1593 /etc/policy-rc.d.conf.
1595 To restore the default behaviour set EXITSTATUS back to '0' in
1596 /etc/policy-rc.d.conf.
1598 Install VMware-Tools for grml:
1600 First of all make sure a CD-ROM device in VMware is available.
1602 Mount the CD-ROM device to /mnt/cdrom, then unpack and install
1606 unp /mnt/cdrom/vmware-linux-tools.tar.gz
1607 cd vmware-tools-distrib
1610 /etc/init.d/networking stop
1615 /etc/init.d/networking start
1617 In an X terminal, launch the VMware Tools running:
1621 Some important Postfix stuff
1629 Send all messages in the queue:
1633 Send all messages in the queue for a specific site:
1637 Delete a specific message
1638 # postsuper -d 12345678942
1640 Deletes all messages held in the queue for later delivery
1641 # postsuper -d ALL deferred
1643 Mail queues in postfix:
1645 incoming -> mail who just entered the system
1646 active -> mail to be delivered
1647 deferred -> mail to be delivered later because there were problems
1648 hold -> mail that should not be delivered until released from hold
1650 For configuration of postfix take a look at
1651 /etc/postfix/master.cf - man 5 master
1652 /etc/postfix/main.cf - man 5 postconf
1653 and http://www.postfix.org/documentation.html.
1657 mode 4000 - set user ID (suid):
1659 - for executable files: run as the user who owns the file, instead of the
1660 user who runs the file
1661 - for directories: not used
1663 mode 2000 - set group ID (guid):
1665 - for executable files: run as the group who owns the file, instead of the
1666 group of the user who runs the file
1667 - for directories: when a file is created inside the directory, it belongs
1668 to the group of the directory instead of the default group of the user who
1671 mode 1000 - sticky bit:
1673 - for files: not used
1674 - for directories: only the owner of a file can delete or rename the file
1676 Create MySQL database
1678 # apt-get install mysql-client mysql-server
1680 Run 'mysql' as root - create a database with:
1682 create database grml
1684 Give a user access to the database (without password):
1686 grant all on grml.* to mika;
1688 Give a user access to the database (with password):
1690 grant all on grml.* to enrico identified by "PASSWORD";
1692 Setup an HTTPS website:
1694 Create a certificate:
1696 # mkdir /etc/apache2/ssl
1697 # make-ssl-cert /usr/share/ssl-cert/ssleay.cnf /etc/apache2/ssl/apache.pem
1699 Create a virtual host on port 443:
1701 <VirtualHost www.foo.invalid:443>
1705 Enable SSL in the VirtualHost:
1708 SSLCertificateFile /etc/apache2/ssl/apache.pem
1710 Enable listening on the HTTPS port (/etc/apache2/ports.conf):
1714 and make sure the SSL module is used:
1718 Useful Apache / Apache2 stuff
1720 Check configuration file via running:
1722 # apache2ctl configtest
1730 # a2enmod modulename
1732 Create tar archive and store it on remote machine:
1734 % tar zcf - /sourcedir | ssh user@targethost "cat >file.tgz"
1736 Pick out and displays images from network traffic:
1740 Install Flash plugin:
1742 # dpkg-reconfigure flashplugin-nonfree
1744 To test a proxy, low level way:
1748 GET http://www.google.com HTTP/1.0 [press enter twice]
1750 Adjust system for use of qemu with kqemu:
1752 Make sure you have all you need:
1753 # aptitude update ; aptitude install qemu kqemu-modules-$(uname -r)
1758 mknod /dev/kqemu c 250 0
1759 chmod 666 /dev/kqemu
1760 chmod 666 /dev/net/tun
1762 Check kqemu support via starting qemu, press
1763 Ctrl-Alt-2 and entering 'info kqemu'.
1765 (High-Load) Debugging related tools:
1767 mpstat # report processors related statistics
1768 iostat # report CPU statistics and input/output statistics for devices and partitions
1769 vmstat # report virtual memory statistics
1770 slabtop # display kernel slab cache information in real time
1771 atsar # system activity report
1772 dstat # versatile tool for generating system resource statistics
1783 Using WPA for network setup manually:
1785 # wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant.conf
1787 Adjust the options and configuration file to your needs.
1788 Also take a look at 'grml-network'.
1790 Start X and lock console via exiting:
1792 % startx 2>~/.xsession-errors &| exit
1794 Which process is writing to disk and/or causes the disk to spin up?
1796 First of all use lsof to check what's going on. Does not help? ->
1798 # echo 1 > /proc/sys/vm/block_dump
1800 The command sets a sysctl to cause the kernel to log all disk
1801 writes. Please notice that there is a lot of data. So please
1802 disable syslogd/syslog-ng before you do this, or you must make
1803 sure that kernel output is not logged.
1805 When you're done, disable block dump using:
1806 # echo 0 > /proc/sys/vm/block_dump
1809 laptop-mode-tools provides a tool named lm-profiler (laptop mode profiler)
1810 which handles block_dump on its own.
1812 See: $KERNEL-SOURCE/Documentation/laptop-mode.txt
1814 Also take a look at event-viewer(8) which is part of grml-debugtools.
1816 Install initrd via initramfs-tools for currently running kernel:
1818 # update-initramfs -c -t -k $(uname -r)
1820 Install initrd via yaird for currently running kernel:
1822 # yaird -o /boot/initrd.img-$(uname -r)
1824 Install initrd via yaird for specific kernel:
1828 # yaird -o /boot/initrd.img-2.6.15-1-686 2.6.15-1-686
1830 Reinstall package with its original configuration files:
1832 # apt-get install --reinstall -o DPkg::Options::=--force-confmiss -o \
1833 DPkg::Options::=--force-confnew package
1835 grml 0.8 funkenzutzler - rt2x00 drivers:
1837 To avoid conflicts with the other rt2x00-drivers the package rt2x00 (which
1838 includes beta-version drivers) is not installed by default. If you want to
1839 use the kernel modules rt2400pci, rt2500pci, rt2500usb, rt61pci and/or
1840 rt73usb please install the package manually running:
1842 # dpkg -i /usr/src/rt2x00-modules-*.deb
1844 Use Java with jikes and jamvm on grml:
1848 % cp /usr/share/doc/grml-templates/template.java .
1849 % jikes template.java
1852 Notice that grml exports $JIKESPATH (/usr/share/classpath/glibj.zip),
1853 so you do not have to manually run
1854 jikes --bootclasspath /usr/share/classpath/glibj.zip
1856 Online resizing of (Software-)RAID5:
1858 # Initiate a RAID5 setup for testing purposes:
1859 mdadm --create --verbose /dev/md0 --level=5 --raid-devices=3 /dev/hda1 /dev/hdb1 /dev/hdd1
1861 # Create filesystem, mount md0, create a testfile and save md5sum for
1864 mount /dev/md0 /mnt/test
1865 dd if=/dev/urandom of=/mnt/test/dd bs=512 count=10000
1866 md5sum /mnt/test/dd > md5sum
1868 # Make sure the RAID is synched via checking:
1871 # Now remove one partition:
1872 mdadm /dev/md0 --fail /dev/hdd1 --remove /dev/hdd1
1874 # Delete partition, create a new + bigger one and set partition type to fd
1875 # (Linux raid autodetect):
1878 # And re-add the partition:
1879 mdadm -a /dev/md0 /dev/hdd1
1881 # Make sure the RAID is synched via checking:
1884 # Repeat the steps for all other disks/partitions as well:
1885 mdadm /dev/md0 --fail /dev/hdb1 --remove /dev/hdb1
1887 mdadm -a /dev/md0 /dev/hdb1
1889 mdadm /dev/md0 --fail /dev/hda1 --remove /dev/hda1
1891 mdadm -a /dev/md0 /dev/hda1
1894 # Now resize the RAID5 system online [see 'man mdadm' for details]:
1895 mdadm --detail /dev/md0 | grep -e 'Array Size' -e 'Device Size'
1896 mdadm --grow /dev/md0 -z max
1897 mdadm --detail /dev/md0 | grep -e "Array Size" -e 'Device Size'
1899 # Last step - resize the filesystem (online again):
1902 ext3 online resizing:
1904 Starting with Linux kernel 2.6.10 you can resize ext3 online. With
1905 e2fsprogs >=1.39-1 new filesystems are created with directory indexing and
1906 on-line resizing enabled by default (see /etc/mke2fs.conf).
1910 cfdisk /dev/hda # create a partition with type 8e (lvm)
1911 pvcreate /dev/hda2 # create a physical volume
1912 vgcreate resize_me /dev/hda2 # create volume group
1913 lvcreate -n resize_me -L100 resize_me # create a logical volume
1914 mkfs.ext3 /dev/resize_me/resize_me # now create a new filesystem
1915 mount /dev/resize_me/resize_me /mnt/test # mount the new fs for demonstrating online resizing
1916 df -h # check the size of the partition
1917 lvextend -L+100M /dev/resize_me/resize_me # let's extend the logical volume
1918 resize2fs /dev/resize_me/resize_me # and finally resize the filesystem
1919 df -h # recheck the size of the partition
1921 This also works for Software-RAID. Demo:
1923 mdadm --create --verbose /dev/md0 --level=raid1 --raid-devices=2 /dev/hda2 /dev/hdb1
1925 mount /dev/md0 /mnt/test
1926 mdadm /dev/md0 --fail /dev/hda2 --remove /dev/hda2
1927 cfdisk /dev/hda # adjust partition size for hda2
1928 mdadm /dev/md0 --add /dev/hda2
1929 mdadm /dev/md0 --fail /dev/hdb1 --remove /dev/hdb1
1930 cfdisk /dev/hdb # adjust partition size for hdb1
1931 mdadm /dev/md0 --add /dev/hdb1
1932 mdadm --grow /dev/md0 --size=max
1935 Notice: online resizing works as soon as the kernel can re-read the
1936 partition table. So it works for example with LVM and SW-RAID but not with
1937 a plain device (/dev/[sh]d*). The kernel does not re-read the partition
1938 table if the device is already mounted.
1940 Use vim as an outline editor:
1942 % $PAGER /usr/share/doc/vim-vimoutliner/README.Debian
1946 Monitor directories/files for changes using iwatch
1948 Monitor /tmp for changes:
1951 Monitor files/directories specified in /etc/iwatch.xml
1952 and send mail on changes:
1955 Some often used mdadm commands:
1958 # mdadm --create --verbose /dev/md0 --level=raid1 --raid-devices=2 /dev/hda1 /dev/hdb1
1960 Display details of specific RAID:
1961 # mdadm --detail /dev/md0
1964 Simulating a drive failure by software:
1965 # mdadm --manage --set-faulty /dev/md0 /dev/hda1
1967 Remove disk from RAID:
1968 # mdadm /dev/md0 -r /dev/hda1
1970 Set disk as faulty and remove from RAID:
1971 # mdadm /dev/md0 --fail /dev/hda1 --remove /dev/hda1
1976 Restart a RAID-device:
1979 Add another disk to existing RAID setup (hotadd):
1980 # mdadm /dev/md0 -a /dev/hde1
1981 # mdadm --grow /dev/md0 --raid-devices=4
1983 Assemble and start all arrays:
1984 # mdadm --assemble --scan
1986 Assemble a specific array:
1987 # mdadm --assemble /dev/md0 /dev/sda1 /dev/sdb1 /dev/sdc1
1990 # mdadm --assemble --run --force --update=resync /dev/md0 /dev/sda1 /dev/sda2
1993 # mdadm --stop --scan
1995 Scan for and setup arrays automatically:
1996 # mdadm --assemble --scan --auto=yes --verbose
1998 Notice: If the above does not work make sure /etc/mdadm/mdadm.conf contains:
2000 CREATE owner=root group=disk mode=0660 auto=yes
2005 # /usr/share/mdadm/mkconf > /etc/mdadm/mdadm.conf
2008 Monitoring the sw raid
2009 # nohup mdadm --monitor --mail=root@localhost --delay=300 /dev/md0
2011 Producing /etc/mdadm/mdadm.conf:
2012 # mdadm --detail --scan > /etc/mdadm/mdadm.conf
2014 See also: man mdadm | less -p "^EXAMPLES"
2015 http://www.tldp.org/HOWTO/Software-RAID-HOWTO.html
2017 A quick summary of the most commonly used RAID levels:
2020 => 2 disks each 160 GB: 320 GB data
2021 RAID 1: Mirrored Set
2022 => 2 disks each 160 GB: 160 GB data
2023 RAID 5: Striped Set with Parity
2024 => 3 disks each 160 GB: 320 GB data; 160 GB redundancy
2026 Common nested RAID levels:
2027 RAID 01: A mirror of stripes
2028 RAID 10: A stripe of mirrors
2029 RAID 30: A stripe across dedicated parity RAID systems
2030 RAID 100: A stripe of a stripe of mirrors
2032 -- http://en.wikipedia.org/wiki/RAID
2034 Logical Volume Management (LVM) with Linux
2039 | hda1 hdc1 (PV:s on partitions or whole disks)
2045 | usrlv rootlv varlv (LV:s)
2047 | ext3 ext3 xfs (filesystems)
2049 Often used commands:
2050 ~~~~~~~~~~~~~~~~~~~~
2052 Create a physical volume:
2053 # pvcreate /dev/hda2
2055 Create a volume group:
2056 # vgcreate testvg /dev/hda2
2058 Create a logical volume:
2059 # lvcreate -n test_lv -L100 testvg
2061 Resize a logical volume:
2062 # lvextend -L+100M /dev/resize_me/resize_me
2063 # resize2fs /dev/resize_me/resize_me # ext2/3
2064 # xfs_growfs /dev/resize_me/resize_me # xfs
2065 # resize_reiserfs -f /dev/resize_me/resize_me # reiserfs online
2066 # mount -o remount,resize /dev/resize_me/resize_me # jfs
2068 Create a snapshot of a logical volume:
2069 # lvcreate -L 500M --snapshot -n mysnap /dev/testvg/test_lv
2071 Deactivate a volume group:
2072 # vgchange -a n my_volume_group
2074 Actually remove a volume group:
2075 # vgremove my_volume_group
2077 Display information about physical volume:
2078 # pvdisplay /dev/hda1
2080 Remove physical volume:
2081 # vgreduce my_volume_group /dev/hda1
2083 Remove logical volume:
2084 # umount /dev/myvg/homevol
2085 # lvremove /dev/myvg/homevol
2088 http://www.tldp.org/HOWTO/LVM-HOWTO/
2090 How to use APT locally
2092 Sometimes you have lots of packages .deb that you would like to use APT to
2093 install so that the dependencies would be automatically solved. Solution:
2096 dpkg-scanpackages debs /dev/null | gzip > debs/Packages.gz
2097 echo " deb file:/root debs/" >> /etc/apt/sources.list
2098 dpkg-scansources debs | gzip > debs/Sources.gz
2099 echo " deb-src file:/root debs/" >> /etc/apt/sources.list
2101 See also: http://www.debian.org/doc/manuals/apt-howto/ch-basico.en.html
2103 Check filesystem's LABEL:
2106 # vol_id -l /dev/sda1
2108 ext2/3 without vol_id:
2109 # dumpe2fs /dev/sda1 | grep "Filesystem volume name"
2112 # xfs_admin -l /dev/sda1
2114 reiserfs without vol_id:
2115 # debugreiserfs /dev/sda1 | grep -i label
2118 # jfs_tune -l /dev/sda1 | grep -i label
2120 reiser4 without vol_id:
2121 # debugfs.reiser4 /dev/sda1 | grep -i label
2123 Check filesystem's UUID:
2126 # vol_id -u /dev/sda1
2128 ext2/3 without vol_id:
2129 # dumpe2fs /dev/sda1 | grep -i UUID
2132 # xfs_admin -u /dev/sda1
2134 reiserfs without vol_id:
2135 # debugreiserfs /dev/sda1 | grep -i UUID
2137 reiser4 without vol_id:
2138 # debugfs.reiser4 /dev/sda1 | grep -i UUID
2140 Change a filesystem's LABEL:
2143 # mkswap -L $LABEL /dev/sda1
2146 # e2label /dev/sda1 $LABEL
2147 # tune2fs -L $LABEL /dev/sda1
2150 # reiserfstune -l $LABEL /dev/sda1
2153 # jfs_tune -L $LABEL /dev/sda1
2156 # xfs_admin -L $LABEL /dev/sda1
2159 # echo 'drive i: file="/dev/sda1"' >> ~/.mtoolsrc
2160 # mlabel -s i:$LABEL
2163 # ntfslabel $LABEL /dev/sda1
2165 Disable pdiffs feature of APT:
2168 # echo 'Acquire::PDiffs "false";' >> /etc/apt/apt.conf
2171 # apt-get update -o Acquire::Pdiffs=false
2173 Backup big devices or files and create compressed splitted
2174 image chunks of it using zsplit
2176 Create backup of /dev/sda named archiveofsda_#.spl.zp in directory
2177 /mnt/sda1/backup, split the files up into chunks of 1GB each and set
2178 read/write buffer to 256kB:
2179 # zsplit -b 256 -N archiveofsda -o /mnt/sda1/backup/ -s 1G /dev/sda
2181 Restore the backup using unzsplit:
2182 # unzsplit -D /dev/sda -d archiveofsda
2184 More usage examples: man zsplit + man unzsplit
2186 Measure network performance using iperf:
2192 % iperf -c <server_address> -V
2196 Server with 128k TCP window size:
2199 Client with running for 60 seconds and bidirectional test:
2200 % iperf -c <server_address> -r -w128k -t60
2202 Framebuffer resolutions:
2204 Resolution in pixels
2205 Color depth | 640x480 800x600 1024x768 1280x1024
2206 256 (8bit)| 769 771 773 775
2207 32000 (15bit)| 784 787 790 793
2208 65000 (16bit)| 785 788 791 794
2209 16.7 Mill.(24bit)| 786 789 792 795
2213 Mode 0x0300: 640x400 (+640), 8 bits
2214 Mode 0x0301: 640x480 (+640), 8 bits
2215 Mode 0x0303: 800x600 (+800), 8 bits
2216 Mode 0x0303: 800x600 (+832), 8 bits
2217 Mode 0x0305: 1024x768 (+1024), 8 bits
2218 Mode 0x0307: 1280x1024 (+1280), 8 bits
2219 Mode 0x030e: 320x200 (+640), 16 bits
2220 Mode 0x030f: 320x200 (+1280), 24 bits
2221 Mode 0x0311: 640x480 (+1280), 16 bits
2222 Mode 0x0312: 640x480 (+2560), 24 bits
2223 Mode 0x0314: 800x600 (+1600), 16 bits
2224 Mode 0x0315: 800x600 (+3200), 24 bits
2225 Mode 0x0317: 1024x768 (+2048), 16 bits
2226 Mode 0x0318: 1024x768 (+4096), 24 bits
2227 Mode 0x031a: 1280x1024 (+2560), 16 bits
2228 Mode 0x031b: 1280x1024 (+5120), 24 bits
2229 Mode 0x0330: 320x200 (+320), 8 bits
2230 Mode 0x0331: 320x400 (+320), 8 bits
2231 Mode 0x0332: 320x400 (+640), 16 bits
2232 Mode 0x0333: 320x400 (+1280), 24 bits
2233 Mode 0x0334: 320x240 (+320), 8 bits
2234 Mode 0x0335: 320x240 (+640), 16 bits
2235 Mode 0x0336: 320x240 (+1280), 24 bits
2236 Mode 0x033c: 1400x1050 (+1408), 8 bits
2237 Mode 0x033d: 640x400 (+1280), 16 bits
2238 Mode 0x033e: 640x400 (+2560), 24 bits
2239 Mode 0x0345: 1600x1200 (+1600), 8 bits
2240 Mode 0x0346: 1600x1200 (+3200), 16 bits
2241 Mode 0x034d: 1400x1050 (+2816), 16 bits
2242 Mode 0x035c: 1400x1050 (+5632), 24 bits
2244 Portscan using netcat:
2246 # netcat -v -w2 <host|ip-addr.> 1-1024
2248 Run apt-get but disable apt-listchanges:
2250 APT_LISTCHANGES_FRONTEND=none apt-get ...
2252 Upgrade system but disable apt-listbugs:
2254 APT_LISTBUGS_FRONTEND=none apt-get ...
2256 Set up a Transparent Debian Proxy
2258 Install of apt-cacher, the default config will do:
2259 # apt-get install apt-cacher
2261 Check out the ip address of debian mirror(s).
2262 Then add this to your firewall script:
2264 DEBIAN_MIRRORS="141.76.2.4 213.129.232.18"
2265 for ip in ${DEBIAN_MIRRORS} ; do
2266 ${IPTABLES} -t nat -A PREROUTING -s $subnet -d $ip -p tcp --dport 80 -j REDIRECT --to-port 3142
2269 where ${IPTABLES} is the location of your iptables binary
2270 and $subnet is your internal subnet.
2272 Now everybody in your subnet who does access either
2273 ftp.de.debian.org or ftp.at.debian.org will actually
2274 access your apt-cacher instead.
2276 To use apt-cacher on the router itself, add the following
2277 line to your /etc/apt/apt.conf:
2279 Acquire::http::Proxy "http://localhost:3142/";
2281 Version control using Mercurial
2283 Setting up a Mercurial project:
2286 % hg init # creates .hg
2287 % hg add # add all files
2288 % hg commit # commit all changes, edit changelog entry
2290 Branching and merging:
2292 % hg clone linux linux-work # create a new branch
2297 % hg pull ../linux-work # pull changesets from linux-work
2298 % hg merge # merge the new tip from linux-work into
2299 # (old versions used "hg update -m" instead)
2300 # our working directory
2301 % hg commit # commit the result of the merge
2305 % cat ../p/patchlist | xargs hg import -p1 -b ../p
2313 % hg export 1234 > foo.patch # export changeset 1234
2315 Export your current repo via HTTP with browsable interface:
2317 % hg serve -n "My repo" -p 80
2319 Pushing changes to a remote repo with SSH:
2321 % hg push ssh://user@example.com/~/hg/
2323 Merge changes from a remote machine:
2325 host1% hg pull http://foo/
2326 host2% hg merge # merge changes into your working directory
2328 Set up a CGI server on your webserver:
2329 % cp hgwebdir.cgi ~/public_html/hg/index.cgi
2330 % $EDITOR ~/public_html/hg/index.cgi # adjust the defaults
2332 Download binary codecs for mplayer:
2334 # /usr/share/mplayer/scripts/win32codecs.sh
2338 # /usr/share/mplayer/scripts/binary_codecs.sh install
2340 (depending on the mplayer version you have).
2342 To play encrypted DVDs and if you are living in a country where using
2343 libdvdcss code is not illegal can install Debian package libdvdread3
2344 and use the script /usr/share/doc/libdvdread3/install-css.sh.
2346 Read manpages of uninstalled packages with debman:
2348 % debman -p git-core git
2350 Test network performance using netperf:
2356 # netperf -t TCP_STREAM -H 192.168.0.41
2358 Setup Xen within 20 minutes on Debian/grml
2360 Install relevant software und update grub's menu.lst (Xen does not work with
2361 usual lilo so install grub instead if not done already):
2363 apt-get install linux-image-2.6.18-1-xen-686 xen-hypervisor-3.0.3-1-i386 \
2364 xen-utils-3.0.3-1 xen-tools bridge-utils
2367 Example for installation of Debian etch as DomU:
2370 xen-create-image --debootstrap --dir=/mnt/md1/xen --size=2Gb --memory=512Mb --fs=ext3 \
2371 --cache=yes --dist=etch --hostname=xengrml1 --ip 192.168.1.2 --netmask 255.255.255.0 \
2372 --gateway 192.168.1.1 --initrd=/boot/initrd.img-2.6.18-1-xen-686 \
2373 --kernel=/boot/vmlinuz-2.6.18-1-xen-686 --mirror=http://ftp.at.debian.org/debian/
2377 /etc/init.d/xend start
2378 /etc/init.d/xendomains start
2380 Setup a bridge for network, either manually:
2382 brctl addbr xenintbr
2383 brctl stp xenintbr off
2384 brctl sethello xenintbr 0
2385 brctl setfd xenintbr 0
2386 ifconfig xenintbr 192.168.1.1 netmask 255.255.255.0 up
2388 or via /etc/network/interfaces (run ifup xenintbr to bring up the device then
2392 iface xenintbr inet static
2393 pre-up brctl addbr xenintbr
2394 post-down brctl delbr xenintbr
2396 netmask 255.255.255.0
2401 Setup forwarding (adjust $PUBLIC_IP; for permanet setup use /etc/sysctl.conf and
2402 add the iptables commands to a startup script like /etc/init.d/rc.local):
2404 echo 1 > /proc/sys/net/ipv4/ip_forward
2405 iptables -t nat -A POSTROUTING -o eth0 -s 192.168.0.0/24 -j SNAT --to $PUBLIC_IP
2406 iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to $PUBLIC_IP
2408 Adjust network configuration of Xend:
2410 cat >> /etc/xen/xend-config.sxp << EOF
2411 (network-script network-route)
2412 (vif-bridge xenintbr)
2413 (vif-script vif-bridge)
2416 List domains, start up a DomU, shutdown later again:
2418 xm create -c /etc/xen/xengrml1.cfg
2422 This HowTo is also available online at http://grml.org/xen/
2424 Play tetris with zsh:
2428 bindkey "^Xt" tetris
2430 Now press 'ctrl-x t'.
2432 Set up a router with grml
2434 Run grml-router script:
2437 Install dnsmasq if not already present:
2438 # apt-get update ; apt-get install dnsmasq
2440 Adjust /etc/dnsmasq.conf according to your needs:
2441 # cat >> /etc/dnsmasq.conf << EOF
2444 dhcp-range=19.168.0.124,192.168.0.254,1m # dhcp range
2445 dhcp-option=3,192.168.0.1 # dns server
2446 dhcp-option=1,255.255.255.0 # netmask
2449 Start dnsmasq finally:
2452 Display stats about memory allocations performed by a program:
2454 Usage example for 'ls':
2456 % LD_PRELOAD=/lib/libmemusage.so ls > /dev/null
2458 Use KVM (Kernel-based Virtual Machine for Linux):
2460 Make sure to install the relevant tools:
2461 # apt-get update ; apt-get install kvm
2464 Test it with a minimal system like ttylinux:
2465 # wget http://www.minimalinux.org/ttylinux/packages/bootcd-i386-5.3.iso.gz
2466 # gzip -d bootcd-i386-5.3.iso.gz
2467 # kvm -cdrom bootcd-i386-5.3.iso
2469 EEPROM data decoding for SDRAM DIMM modules:
2472 # /usr/share/doc/lm-sensors/examples/eeprom/decode-dimms.pl
2476 Make sure your device is supported by Linux and running.
2477 See http://www.linuxtv.org/ for more details.
2479 If the DVB device works on your system (see 'hwinfo --usb'
2480 when using a DVB usb device for example), then make sure you
2481 have the scan util from dvb-utils available:
2483 # aptitude install dvb-utils
2485 Then create a channels.conf configuration file:
2487 % scan /usr/share/doc/dvb-utils/examples/scan/... > ~/.mplayer/channels.conf
2489 You can find some example configuration files on
2490 your grml system in ~/.channels. Usage example:
2492 % ln -s ~/.mplayer/channels.conf-AT-graz ~/.mplayer/channels.conf
2494 Tip: w_scan (see http://free.pages.at/wirbel4vdr/w_scan/index2.html)
2495 might be useful if you do not know the initial configuration
2498 Get the lastest mercurial snapshot:
2500 Make sure you have the python-dev package available:
2501 # apt-get update ; apt-get install python-dev
2503 Get and build the source:
2504 % hg clone http://selenic.com/repo/hg mercurial
2507 % export PYTHONPATH=$(pwd)
2508 % export PATH=$PATH:$(pwd)
2510 now you should have the newest version of mercurial whenever you execute hg.
2512 To update to the lastest development snapshot, additionally use
2513 the following commands:
2514 % hg pull -u http://hg.intevation.org/mercurial/crew
2520 Available bootoptions relevant in live-cd mode:
2521 -----------------------------------------------
2523 * utc: set UTC, if your system clock is set to UTC (GMT)
2524 * gmt: set UTC, if your system clock is set to UTC (GMT) [like bootoption utc]
2525 * tz=$option: set timezone to corresponding $option, usage example:
2528 Configuration options relevant on harddisk installation:
2529 --------------------------------------------------------
2531 * Use the tzconfig utility to set the local timezone:
2535 which adjusts /etc/timezone and /etc/localtime according
2536 to the provided information. Running:
2538 # dpkg-reconfigure tzdata
2540 might be useful as well.
2542 * /etc/default/rcS: set variable UTC according to your needs,
2543 whether your system clock is set to UTC (UTC='yes') or
2546 * /etc/localtime: adjust zoneinfo according to your needs:
2548 # ln -sf /usr/share/zoneinfo/$WHATEVER_YOU_WANT /etc/localtime
2550 The zoneinfo directory contains the time zone files that were
2551 compiled by zic. The files contain information such as rules
2552 about DST. They allow the kernel to convert UTC UNIX time into
2553 appropriate local dates and times. Use the zdump utility to
2554 print current time and date (in the specified time zone).
2556 * /etc/adjtime: This file is used e.g. by the adjtimex function,
2557 which can smoothly adjust system time while the system runs
2559 * If you change the time (using 'date --set ...', ntpdate,...)
2560 it is worth setting also the hardware clock to the correct time:
2562 # hwclock --systohc [--utc]
2564 Remember to add the --utc -option if the hardware clock is set
2570 Check your current settings via:
2573 zdump /etc/localtime
2576 grep hwclock /etc/runlevel.conf
2577 grep '^UTC' /etc/default/rc
2579 Further information:
2580 --------------------
2582 hwclock(8) tzselect(1) tzconfig(8)
2583 http://www.debian.org/doc/manuals/system-administrator/ch-sysadmin-time.html
2584 http://wiki.debian.org/TimeZoneChanges
2586 Recorder shellscript session using script:
2588 % script -t 2>~/upgrade.time -a ~/upgrade.script
2589 % scriptreplay ~/upgrade.time ~/upgrade.script
2591 Test UTF-8 capabilities of terminal:
2593 wget http://melkor.dnp.fmph.uniba.sk/~garabik/debian-utf8/download/UTF-8-demo.txt.gz
2594 zcat UTF-8-demo.txt.gz
2598 wget http://www.cl.cam.ac.uk/~mgk25/ucs/examples/UTF-8-test.txt
2601 UTF-8 at grml / some general information regarding Unicde/UTF-8:
2603 http://wiki.grml.org/doku.php?id=utf8
2606 This allows one ssh connection attepmt per minute per source ip, with a initial
2607 burst of 10. The available burst is like a counter which is initialised with
2608 10. Every connection attempt decrements the counter, and every minute where the
2609 connection limit of one per minute is not overstepped the counter is
2610 incremented by one. If the burst counter is exhausted the real rate limit
2611 comes into play. This gives you 11 connectionattepmts in the first minute
2612 before blocked for 10minutes. After 10 minutes block the game restarts.
2614 Hint: you could set the burst value to 5 and the block time to only 5 minutes
2615 to achive the same average connection rate but with halve the block time.
2617 iptables -A inet_in -p tcp --syn --dport 22 -m hashlimit --hashlimit-name ssh \
2618 --hashlimit 1/minute \ --hashlimit-burst 10 --hashlimit-mode srcip \
2619 --hashlimit-htable-expire 600000 -j ACCEPT
2620 iptables -A inet_in -p tcp --dport 22 -m state --state NEW -j REJECT
2622 Tunnel a specific connection via socat:
2625 % socat TCP4-LISTEN:8003 TCP4:gateway:500
2628 # socat TCP4-LISTEN:500,fork TCP4:target:$PORT
2630 Using localhost:8003 on the client uses the tunnel now.
2634 # date --set=060916102007
2636 where the bits are month(2)/day(2)/hour(2)/minute(2)/year(4)
2638 Set date using a relative date:
2644 # date -s '+tomorrow'
2646 Display a specific relative date:
2648 # date -d '+5 days -2 hours'
2650 Don't forget to set hardware clock via:
2654 Booting grml via network / PXE:
2656 Start grml-terminalserver on a system with network access
2657 and where grml is running:
2659 # grml-terminalserver
2661 Then booting your client(s) via PXE should work without
2664 See: man grml-terminalserver + http://grml.org/terminalserver/
2666 Debugging SSL communications:
2668 % openssl s_client -connect server.adress:993 > output_file
2669 % openssl x509 -noout -text -in output_file
2673 # ssldump -a -A -H -i eth0
2675 See http://prefetch.net/articles/debuggingssl.html for more details.
2677 Remove bootmanager from MBR:
2679 # lilo -M /dev/hda -s /dev/null
2681 Rewrite grub to MBR:
2684 # grub-install --recheck --no-floppy --root-directory=/mnt/sda1 /dev/sda
2686 Rewrite lilo to MBR:
2691 Create screenshot of plain/real console - tty1:
2693 # fbgrab -c 1 screeni.png
2695 Create screenshot when running X:
2699 Tip: use the gkrellshoot plugin when using gkrellm
2701 Redirect all connections to hostA:portA to hostB:portB, where hostA and hostB are
2704 Run the following commands on hostA:
2706 echo 1 > /proc/sys/net/ipv4/ip_forward
2707 iptables -t nat -A PREROUTING -p tcp --dport portA -j DNAT --to hostB:portB
2708 iptables -A FORWARD -i eth0 -o eth0 -d hostB -p tcp --dport portB -j ACCEPT
2709 iptables -A FORWARD -i eth0 -o eth0 -s hostB -p tcp --sport portB -j ACCEPT
2710 iptables -t nat -A POSTROUTING -p tcp -d hostB --dport portB -j SNAT --to-source hostA
2712 Flash BIOS without DOS/Windows:
2714 Dump flash info and set the flash chip to writable:
2717 Backup the original BIOS:
2718 # flashrom -r backup.bin
2720 Notice: the following step will overwrite your current BIOS!
2721 So make sure you really know what you are doing.
2723 Flash the BIOS image:
2724 # flashrom -wv newbios.bin
2726 Also check out LinuxBIOS: http://linuxbios.org/
2728 Enable shadow passwords:
2732 Set up an IPv6 tunnel on grml:
2736 Set up console newsreader slrn for use with Usenet:
2740 Calculate with IPv6 addresses:
2744 For usage examples refer to manpage ipv6calc(8).
2746 Common network debugging tools for use with IPv6:
2755 Set up NFS (Network File System):
2759 Make sure the relevant services are running on the server side:
2761 # /etc/init.d/portmap start
2762 # /etc/init.d/nfs-common start
2763 # /etc/init.d/nfs-kernel-server start
2765 Export shares via /etc/exports:
2767 /backups 192.168.1.100/24(rw,wdelay,no_root_squash,async,subtree_check)
2769 ... or manually export a directory running:
2771 # exportfs -o rw,wdelay,no_root_squash,async,subtree_check 192.168.1.100:/backups
2773 and unexport a share running:
2775 # exportfs -u 192.168.1.100:/backups
2777 and every time when you modify /etc/exports file run
2781 Display what NFS components are running:
2785 Display list of exported shares:
2793 Make sure the relevant services are running on the client side:
2795 # /etc/init.d/portmap start
2796 # /etc/init.d/nfs-common start
2798 Verify that the server allows you to access its RPC/NFS services:
2800 # rpcinfo -p server_name
2802 Check what directories the server exports:
2804 # showmount -e server_name
2806 On the client side you can use something like the following in /etc/fstab:
2808 192.168.1.101:/backups /mnt/nfs nfs defaults,users,wsize=8192,rsize=8192 0 0
2812 # aptitude install cloop-src
2815 # modprobe cloop file=/path/to/cloop/file
2816 # mount -r -t iso9660 /dev/cloop /mnt/test
2818 Create a PS/PDF of a plaintext file:
2820 % a2ps --medium A4dj -E -o output.ps input_file
2823 Print two pages on one in a PDF file:
2825 % pdfnup --nup 2x1 input.pdf
2827 Concatenate, extract pages/parts, encrypt/decrypt,
2828 compress PDFs using 'pdftk'.
2830 Read a PS/PDF file on console:
2834 or on plain framebuffer console in graphical mode:
2836 % pdf2ps file.pdf ; ps2png file.ps file.png ; fbi file.png
2842 Bypass the password of a PDF file:
2844 % gs -q -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=output.pdf input.pdf -c quit
2850 This will record a AIFF audio file.
2852 Change passphrase / password of an existing SSH key:
2856 Enable syntax highlighting in nano:
2858 Just uncomment the include directives for your respective
2859 language at the bottom of the file /etc/nanorc
2861 Create netboot package for grml-terminalserver:
2863 # sh /usr/share/doc/grml-terminalserver/examples/create-netboot
2865 To boot grml via network (PXE) check out grml-terminalserver:
2867 # grml-terminalserver
2869 See http://grml.org/terminalserver/ for more details.
2873 Using the 'Orientation' tag of the Exif header, rotate
2874 the image so that it is upright:
2875 % jhead -autorot *.jpg
2877 Manually rotate a picture:
2878 % convert -rotate 270 input.jpg output.jpg
2880 Rename files based on the information inside their exif header:
2882 % jhead -n%Y-%m-%d_%Hh%M_%f *.jpg
2884 This will rename a file named img_2071.jpg to something like:
2886 2007-08-17_10h38_img_2071.jpg
2888 if it was shot at 10:38 o'clock on 2007-08-17 (according to
2889 the information inside the exif header).
2891 Calculate network / netmask:
2894 % ipcalc 10.0.0.28 255.255.255.0
2895 % ipcalc 10.0.0.0/24
2897 Blacklist a kernel module:
2899 # blacklist <name_of_kernel_module>
2901 -> running 'blacklist hostap_cs' for example will generate an
2902 entry like this in /etc/modprobe.d/grml:
2907 To remove the module from the blacklist again just invoke:
2909 # unblacklist <name_of_kernel_module>
2911 or manually remove the entry from /etc/modprobe.d/grml.
2913 Create a Debian package of a perl module:
2915 % dh-make-perl --cpan Acme::Smirch --build
2917 The Magic SysRq Keys (SysReq or Sys Req, short for System Request):
2919 To reboot your system using the SysRq keys just hold down the Alt and
2920 SysRq (Print Screen) key while pressing the keys REISUB ("Raising
2921 Elephants Is So Utterly Boring").
2923 R = take the keyboard out of raw mode
2924 E = terminates all processes (except init)
2925 I = kills all processes (except init)
2926 S = synchronizes the disk(s)
2927 U = remounts all filesystems read-only
2928 B = reboot the system
2930 Notice: use O instead of B for poweroff.
2932 Or write the sequence to /proc/sysrq-trigger instead:
2934 # for i in r e i s u b ; do echo $i > /proc/sysrq-trigger ; done
2936 To enable or disable SysRq calls:
2938 # echo 0 > /proc/sys/kernel/sysrq
2939 # echo 1 > /proc/sys/kernel/sysrq
2941 See http://en.wikipedia.org/wiki/Magic_SysRq_key for more details.
2945 Just boot your grml Live-CD with "memtest" to execute a memcheck/memtest
2948 Tunnel TCP-Traffic through DNS using dns2tcp:
2952 1. Create necessary DNS-Records:
2953 dnstun.example.com. 3600 IN NS host.example.com.
2954 dnstun.example.com. 3600 IN A 192.168.1.1
2955 host.example.com. 3600 IN A 192.168.1.1
2957 2. Configure dns2tcpd on host.example.com.:
2958 # cat /etc/dns2tcpd.conf
2959 listen = 192.168.1.1 #the ip dns2tcpd should listen on
2960 port = 53 #" port " " " "
2963 domain = dnstun.example.com. # the zone as specified inside dns
2964 ressources = ssh:127.0.0.1:22 # available resources
2966 3. Start the daemon:
2967 # cat > /etc/default/dns2tcp << EOF
2968 # Set ENABLED to 1 if you want the init script to start dns2tcpd.
2972 # /etc/init.d/dns2tcp start
2976 You have two possibilities:
2977 - Use the DNS inside your network (DNS must allow resolving for external domains)
2978 # grep nameserver /etc/resolv.conf
2979 nameserver 172.16.42.1
2980 # dns2tcpc -z dnstun.example.com 172.16.42.1
2981 Available connection(s) :
2983 # dns2tcpc -r ssh -l 2222 -z dnstun.example.com 172.16.42.1 &
2984 Listening on port : 2222
2985 # ssh localhost -p 2222
2986 user@host.example.com:~#
2988 - Directly contact the endpoint (port 53 UDP must be allowed outgoing)
2989 # dns2tcpc -z dnstun.example.com dnstun.example.com
2990 Available connection(s) :
2992 # dns2tcpc -r ssh -l 2222 -z dnstun.example.com dnstun.example.com &
2993 Listenning on port : 2222
2994 # ssh localhost -p 2222
2995 user@host.example.com:~#
2997 Notice: using 'ssh -D 8080 ..' you will get a socks5-proxy listening on
2998 localhost:8080 which you can use to tunnel everything through your "dns-uplink".
3000 Configure a MadWifi device for adhoc mode:
3002 Disable the autocreation of athX devices:
3003 # echo "options ath_pci autocreate=none" > /etc/modprobe.d/madwifi
3005 Remove the autocreated device for now:
3006 # wlanconfig ath0 destroy
3008 Configuration in /etc/network/interfaces:
3010 iface ath0 inet static
3016 - Do not use interface names without ending 0 (otherwise startup fails).
3017 - Only chooss unique names for interfaces.
3019 Find dangling symlinks using zsh:
3023 Use approx with runit supervision
3024 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3026 Install the packages:
3027 # apt-get install approx runit
3029 Add user approxlog for the logging daemon:
3030 # adduser --system --home /nonexistent --no-create-home approxlog
3032 Create config directory:
3033 # mkdir /etc/sv/approx
3035 Use /var/run/sv.approx as supervise directory:
3036 # ln -s /var/run/sv.approx /etc/sv/approx/supervise
3038 # cat > /etc/sv/approx/run << EOF
3040 echo 'approx starting'
3044 You normally do not need a logging service for approx because it logs
3045 to syslog too. So just for completion:
3046 # mkdir -p /etc/sv/approx/log
3047 # ln -s /var/run/sv.approx.log /etc/sv/approx/log/supervise
3048 # cat > /etc/sv/approx/log/run << EOF
3051 LOG="/var/log/approx"
3052 test -d "$LOG" || mkdir -p -m2750 "$LOG" && chown approxlog:adm "$LOG"
3053 exec chpst -uapproxlog svlogd -tt -v "$LOG"
3056 Now activate the new approx service (will be started within 5s):
3057 # ln -s /etc/sv/approx/ /var/service/
3059 Make approx managed via runit available via init-script interface:
3060 # dpkg-divert --local --rename /etc/init.d/approx
3061 # ln -s /usr/bin/sv /etc/init.d/approx
3063 Remote-reboot a grml system using SysRQ via /proc (execute as root):
3068 echo b > /proc/sysrq-trigger
3070 Show what happens on /dev/sda0:
3072 # mount the debugfs to relay kernel info to userspace
3073 mount -t debugfs none /sys/kernel/debug
3075 # is a convenient wrapper arround blktrace and blkparse
3078 Convert Flash to Avi:
3080 % ffmpeg -i input.flv output.avi
3082 Usage example for cryptsetup / -luks encrypted partition on LVM:
3084 volume group name: x61
3085 logical volume name: home
3087 echo "grml-crypt_home /dev/mapper/x61-home none luks" >> /etc/crypttab
3089 mount /dev/mapper/grml-crypt_home /mnt/test
3091 fdisk/parted/... complains with something like
3092 'unable to open /dev/sda - unrecognised disk label'?!
3094 See http://grml.org/faq/#fdisk =>
3096 * use /sbin/fdisk.distrib from util-linux
3097 * switch to sfdisk, cfdisk,...
3098 * use parted's mklabel command (but please read the
3099 parted manual before executing this command)
3101 dmraid - support for SW-RAID / FakeRAID controllers
3102 like Highpoint HPT and Promise FastTrack
3104 Activate all software RAID sets discovered:
3107 Deactivates all active software RAID sets:
3110 Discover all software RAID devices supported on the system:
3113 Extract winmail.dat:
3118 Extract files to current directory:
3119 % ytnef -f . winmail.dat
3121 Approx - Debian package proxy/cacher howto
3123 % apt-get install approx
3124 % echo 'debian http://ftp.de.debian.org/debian' >>/etc/approx/approx.conf
3127 Add your new approx to sources.list
3130 deb http://localhost:9999/debian unstable main contrib non-free
3132 use approx in grml-debootstrap like:
3133 % grml-debootstrap -r lenny -t /dev/sda1 -m http://127.0.0.1:9999/debian
3135 Simple webserver with python:
3137 % python -m SimpleHTTPServer
3139 Upgrade only packages from the grml-stable Debian repository:
3141 echo 'deb http://deb.grml.org/ grml-stable main' > /etc/apt/grml-stable.list
3142 apt-get -o Dir::Etc::sourcelist=/etc/apt/grml-stable.list -o Dir::Etc::sourceparts=/doesnotexist update
3145 Install Centos into a directory:
3147 % febootstrap centos-5 directory http://mirror.centos.org/centos-5/5.3/os/i386/
3149 Install Fedora into a directory:
3151 % febootstrap fedora-11 target_directory