# host completion
if is42 ; then
+ [[ -r ~/.ssh/config ]] && _ssh_config_hosts=(${${${(@M)${(f)"$(<$HOME/.ssh/config)"}:#Host *}#Host }:#*[*?]*}) || _ssh_config_hosts=()
[[ -r ~/.ssh/known_hosts ]] && _ssh_hosts=(${${${${(f)"$(<$HOME/.ssh/known_hosts)"}:#[\|]*}%%\ *}%%,*}) || _ssh_hosts=()
[[ -r /etc/hosts ]] && : ${(A)_etc_hosts:=${(s: :)${(ps:\t:)${${(f)~~"$(</etc/hosts)"}%%\#*}##[:blank:]#[^[:blank:]]#}}} || _etc_hosts=()
else
+ _ssh_config_hosts()
_ssh_hosts=()
_etc_hosts=()
fi
hosts=(
$(hostname)
+ "$_ssh_config_hosts[@]"
"$_ssh_hosts[@]"
"$_etc_hosts[@]"
localhost
bind2maps viins vicmd -- Left vi-backward-char
bind2maps emacs -- Right forward-char
bind2maps viins vicmd -- Right vi-forward-char
-bind2maps viins vicmd -- Right vi-forward-char
#k# Perform abbreviation expansion
bind2maps emacs viins -- -s '^x.' zleiab
#k# Display list of abbreviations that would expand
# - vcs_info setup and version specific fixes
# display battery status on right side of prompt using 'GRML_DISPLAY_BATTERY=1' in .zshrc.pre
-if [[ $GRML_DISPLAY_BATTERY -gt 0 ]] ; then
- if ! islinux ; then
- # not yet supported
- GRML_DISPLAY_BATTERY=0
- fi
-fi
battery() {
if [[ $GRML_DISPLAY_BATTERY -gt 0 ]] ; then
if islinux ; then
batterylinux
+ elif isopenbsd ; then
+ batteryopenbsd
+ elif isfreebsd ; then
+ batteryfreebsd
+ elif isdarwin ; then
+ batterydarwin
+ else
+ #not yet supported
+ GRML_DISPLAY_BATTERY=0
fi
fi
}
fi
}
+batteryopenbsd(){
+GRML_BATTERY_LEVEL=''
+local bat batfull batwarn batnow num
+for num in 0 1 ; do
+ bat=$(sysctl -n hw.sensors.acpibat${num} 2>/dev/null)
+ if [[ -n $bat ]]; then
+ batfull=${"$(sysctl -n hw.sensors.acpibat${num}.amphour0)"%% *}
+ batwarn=${"$(sysctl -n hw.sensors.acpibat${num}.amphour1)"%% *}
+ batnow=${"$(sysctl -n hw.sensors.acpibat${num}.amphour3)"%% *}
+ case "$(sysctl -n hw.sensors.acpibat${num}.raw0)" in
+ *" discharging"*)
+ if (( batnow < batwarn )) ; then
+ GRML_BATTERY_LEVEL+=" !v"
+ else
+ GRML_BATTERY_LEVEL+=" v"
+ fi
+ ;;
+ *" charging"*)
+ GRML_BATTERY_LEVEL+=" ^"
+ ;;
+ *)
+ GRML_BATTERY_LEVEL+=" ="
+ ;;
+ esac
+ GRML_BATTERY_LEVEL+="${$(( 100 * batnow / batfull ))%%.*}%%"
+ fi
+done
+}
+
+batteryfreebsd(){
+GRML_BATTERY_LEVEL=''
+local num
+local -A table
+for num in 0 1 ; do
+ table=( ${=${${${${${(M)${(f)"$(acpiconf -i $num 2>&1)"}:#(State|Remaining capacity):*}%%( ##|%)}//:[ $'\t']##/@}// /-}//@/ }} )
+ if [[ -n $table ]] && [[ $table[State] != "not-present" ]] ; then
+ case $table[State] in
+ *discharging*)
+ if (( $table[Remaining-capacity] < 20 )) ; then
+ GRML_BATTERY_LEVEL+=" !v"
+ else
+ GRML_BATTERY_LEVEL+=" v"
+ fi
+ ;;
+ *charging*)
+ GRML_BATTERY_LEVEL+=" ^"
+ ;;
+ *)
+ GRML_BATTERY_LEVEL+=" ="
+ ;;
+ esac
+ GRML_BATTERY_LEVEL+="$table[Remaining-capacity]%%"
+ fi
+done
+}
+
+batterydarwin(){
+GRML_BATTERY_LEVEL=''
+local -a table
+table=( ${$(pmset -g ps)[(w)7,8]%%(\%|);} )
+if [[ -n $table[2] ]] ; then
+ case $table[2] in
+ charging)
+ GRML_BATTERY_LEVEL+=" ^"
+ ;;
+ discharging)
+ if (( $table[1] < 20 )) ; then
+ GRML_BATTERY_LEVEL+=" !v"
+ else
+ GRML_BATTERY_LEVEL+=" v"
+ fi
+ ;;
+ *)
+ GRML_BATTERY_LEVEL+=" ="
+ ;;
+ esac
+ GRML_BATTERY_LEVEL+="$table[1]%%"
+fi
+}
+
# set variable debian_chroot if running in a chroot with /etc/debian_chroot
if [[ -z "$debian_chroot" ]] && [[ -r /etc/debian_chroot ]] ; then
debian_chroot=$(</etc/debian_chroot)
hash -d log=/var/log
hash -d slog=/var/log/syslog
hash -d src=/usr/src
-hash -d templ=/usr/share/doc/grml-templates
-hash -d tt=/usr/share/doc/texttools-doc
hash -d www=/var/www
#d# end
# do we have GNU ls with color-support?
if [[ "$TERM" != dumb ]]; then
#a1# List files with colors (\kbd{ls -F \ldots})
- alias ls='ls -F '${ls_options:+"${ls_options[*]}"}
+ alias ls='command ls -F '${ls_options:+"${ls_options[*]}"}
#a1# List all files, with colors (\kbd{ls -la \ldots})
- alias la='ls -la '${ls_options:+"${ls_options[*]}"}
+ alias la='command ls -la '${ls_options:+"${ls_options[*]}"}
#a1# List files with long colored list, without dotfiles (\kbd{ls -l \ldots})
- alias ll='ls -l '${ls_options:+"${ls_options[*]}"}
+ alias ll='command ls -l '${ls_options:+"${ls_options[*]}"}
#a1# List files with long colored list, human readable sizes (\kbd{ls -hAl \ldots})
- alias lh='ls -hAl '${ls_options:+"${ls_options[*]}"}
+ alias lh='command ls -hAl '${ls_options:+"${ls_options[*]}"}
#a1# List files with long colored list, append qualifier to filenames (\kbd{ls -lF \ldots})\\&\quad(\kbd{/} for directories, \kbd{@} for symlinks ...)
- alias l='ls -lF '${ls_options:+"${ls_options[*]}"}
+ alias l='command ls -lF '${ls_options:+"${ls_options[*]}"}
else
- alias ls='ls -F'
- alias la='ls -la'
- alias ll='ls -l'
- alias lh='ls -hAl'
- alias l='ls -lF'
+ alias ls='command ls -F'
+ alias la='command ls -la'
+ alias ll='command ls -l'
+ alias lh='command ls -hAl'
+ alias l='command ls -lF'
fi
alias mdstat='cat /proc/mdstat'
# general
#a2# Execute \kbd{du -sch}
alias da='du -sch'
-#a2# Execute \kbd{jobs -l}
-alias j='jobs -l'
# listing stuff
#a2# Execute \kbd{ls -lSrah}
-alias dir="ls -lSrah"
+alias dir="command ls -lSrah"
#a2# Only show dot-directories
-alias lad='ls -d .*(/)'
+alias lad='command ls -d .*(/)'
#a2# Only show dot-files
-alias lsa='ls -a .*(.)'
+alias lsa='command ls -a .*(.)'
#a2# Only files with setgid/setuid/sticky flag
-alias lss='ls -l *(s,S,t)'
+alias lss='command ls -l *(s,S,t)'
#a2# Only show symlinks
-alias lsl='ls -l *(@)'
+alias lsl='command ls -l *(@)'
#a2# Display only executables
-alias lsx='ls -l *(*)'
+alias lsx='command ls -l *(*)'
#a2# Display world-{readable,writable,executable} files
-alias lsw='ls -ld *(R,W,X.^ND/)'
+alias lsw='command ls -ld *(R,W,X.^ND/)'
#a2# Display the ten biggest files
-alias lsbig="ls -flh *(.OL[1,10])"
+alias lsbig="command ls -flh *(.OL[1,10])"
#a2# Only show directories
-alias lsd='ls -d *(/)'
+alias lsd='command ls -d *(/)'
#a2# Only show empty directories
-alias lse='ls -d *(/^F)'
+alias lse='command ls -d *(/^F)'
#a2# Display the ten newest files
-alias lsnew="ls -rtlh *(D.om[1,10])"
+alias lsnew="command ls -rtlh *(D.om[1,10])"
#a2# Display the ten oldest files
-alias lsold="ls -rtlh *(D.Om[1,10])"
+alias lsold="command ls -rtlh *(D.Om[1,10])"
#a2# Display the ten smallest files
-alias lssmall="ls -Srl *(.oL[1,10])"
+alias lssmall="command ls -Srl *(.oL[1,10])"
#a2# Display the ten newest directories and ten newest .directories
-alias lsnewdir="ls -rthdl *(/om[1,10]) .*(D/om[1,10])"
+alias lsnewdir="command ls -rthdl *(/om[1,10]) .*(D/om[1,10])"
#a2# Display the ten oldest directories and ten oldest .directories
-alias lsolddir="ls -rthdl *(/Om[1,10]) .*(D/Om[1,10])"
+alias lsolddir="command ls -rthdl *(/Om[1,10]) .*(D/Om[1,10])"
# some useful aliases
#a2# Remove current empty directory. Execute \kbd{cd ..; rmdir \$OLDCWD}
# useful functions
-#f5# Backup \kbd{file {\rm to} file\_timestamp}
+#f5# Backup \kbd{file_or_folder {\rm to} file_or_folder\_timestamp}
bk() {
emulate -L zsh
- cp -b $1 $1_`date --iso-8601=m`
+ local current_date=$(date -u "+%Y-%m-%dT%H:%M:%SZ")
+ local clean keep move verbose result
+ setopt extended_glob
+ usage() {
+ cat << EOT
+bk [-hcmv] FILE [FILE ...]
+bk -r [-v] [FILE [FILE ...]]
+Backup a file or folder in place and append the timestamp
+Remove backups of a file or folder, or all backups in the current directory
+
+Usage:
+-h Display this help text
+-c Keep the file/folder as is, create a copy backup using cp(1) (default)
+-m Move the file/folder, using mv(1)
+-r Remove backups of the specified file or directory, using rm(1). If none
+ is provided, remove all backups in the current directory.
+-v Verbose
+
+The -c, -r and -m options are mutually exclusive. If specified at the same time,
+the last one is used.
+
+The return code is the sum of all cp/mv/rm return codes.
+EOT
+ }
+ keep=1
+ while getopts ":hcmrv" opt; do
+ case $opt in
+ c) unset move clean && (( ++keep ));;
+ m) unset keep clean && (( ++move ));;
+ r) unset move keep && (( ++clean ));;
+ v) verbose="-v";;
+ h) usage;;
+ \?) usage >&2; return 1;;
+ esac
+ done
+ shift "$((OPTIND-1))"
+ if (( keep > 0 )); then
+ while (( $# > 0 )); do
+ if islinux || isfreebsd; then
+ cp $verbose -a "${1%/}" "${1%/}_$current_date"
+ else;
+ cp $verbose -pR "${1%/}" "${1%/}_$current_date"
+ fi
+ (( result += $? ))
+ shift
+ done
+ elif (( move > 0 )); then
+ while (( $# > 0 )); do
+ mv $verbose "${1%/}" "${1%/}_$current_date"
+ (( result += $? ))
+ shift
+ done
+ elif (( clean > 0 )); then
+ if (( $# > 0 )); then
+ while (( $# > 0 )); do
+ rm $verbose -rf "${1%/}"_[0-9](#c4,)-(0[0-9]|1[0-2])-([0-2][0-9]|3[0-1])T([0-1][0-9]|2[0-3])(:[0-5][0-9])(#c2)Z
+ (( result += $? ))
+ shift
+ done
+ else
+ rm $verbose -rf *_[0-9](#c4,)-(0[0-9]|1[0-2])-([0-2][0-9]|3[0-1])T([0-1][0-9]|2[0-3])(:[0-5][0-9])(#c2)Z
+ (( result += $? ))
+ fi
+ fi
+ return $result
}
#f5# cd to directoy and list files