Configure setup via configuration file /etc/grml/routersetup.
To specify which DEVICES should be bridged, use BRIDGE_DEVICES, e.g.
- BRIDGE_DEVICES="eth0 eth1"
+ BRIDGE_DEVICES="eth0 eth2"
-would bridge device eth0 and eth1.
+would bridge device eth0 and eth2.
+If unconfigured then 'eth0 eth1' is assumed as default.
Note: The auto interface name is not allowed here!
To specify the name of the bridge, use BRIDGE_NAME, e.g.
BRIDGE_STP="no"
-Per default stp is on.
+Per default STP is set to 'on'.
Example Configuration file: