.\" This file was generated with po4a. Translate the source file.
.\"
.\"*******************************************************************
-.TH LIVE\-BOOT 7 08.06.2010 2.0~a6 "Debian Live Projekt"
+.TH LIVE\-BOOT 7 26.10.2010 3.0~a9 "Debian Live Projekt"
.SH NAME
\fBlive\-boot\fP \- System Boot Skripte
.SS Konfigurationsdateien
\fBlive\-boot\fP can be configured (but not activated) through configuration
files. Those files can be placed either in the root filesystem itself
-(/etc/live/boot.conf, /etc/live/boot.conf.d/), or on the live media
-(live/boot.conf, live/boot.conf.d/).
+(/etc/live/boot.conf, /etc/live/boot.d/), or on the live media
+(live/boot.conf, live/boot.d/).
.SH OPTIONEN
.\" FIXME
Lun 0 Path=<path\-to\-your\-live\-image.iso>,Type=fileio,IOMode=ro
# If you want to boot multiple machines you might want to look at tuning some parameters like
# Wthreads or MaxConnections
+.IP \fBfromiso\fP=\fI/PATH/TO/IMAGE\fP 4
+Allows to use a filesystem from within an iso image that's available on
+live\-media.
.IP \fBignore_uuid\fP 4
Do not check that any UUID embedded in the initramfs matches the discovered
medium. live\-boot may be told to generate a UUID by setting
Do not prompt to eject the CD or remove the USB flash drive on reboot.
.IP \fBswapon\fP 4
This parameter enables usage of local swap partitions.
-.IP \fBnoxautoconfig\fP 4
-This parameter disables Xorg auto\-reconfiguration at boot time. This is
-valuable if you either do the detection on your own, or, if you want to ship
-a custom, premade xorg.conf in your live system.
-.IP \fBpersistent\fP[=nofiles] 4
+.IP \fBpersistent\fP[={nofiles|cryptsetup}] 4
live\-boot will look for persistent and snapshot partitions or files labeled
"live\-rw", "home\-rw", and files called "live\-sn*", "home\-sn*" and will try
to, in order: mount as /cow the first, mount the second in /home, and just
copy the contents of the latter in appropriate locations
(snapshots). Snapshots will be tried to be updated on reboot/shutdown. Look
-at live\-snapshot(1) for more informations. If "nofiles" is specified, only
-filesystems with matching labels will be searched; no filesystems will be
-traversed looking for archives or image files. This results in shorter boot
-times.
+at live\-snapshot(1) for more informations.
+.br
+If "nofiles" is specified, only filesystems with matching labels will be
+searched; no filesystems will be traversed looking for archives or image
+files. This results in shorter boot times.
+.br
+If "cryptsetup" is specified, filesystems stored on Luks\-encrypted devices
+will be considered as well as others when searching for a persistence
+filesystem; the user will be prompted for any needed decryption passphrase.
.IP \fBpersistent\-path\fP=\fIPATH\fP 4
live\-boot will look for persistency files in the root directory of a
partition, with this parameter, the path can be configured so that you can
have multiple directories on the same partition to store persistency files.
+.IP \fBpersistent\-subtext\fP=\fISUFFIX\fP 4
+Add a suffix when searching for the image filenames or partition labels to
+use for the above mentioned persistent feature, the SUFFIX will be added
+after a dash (e.g.: "live\-sn" would transform to "live\-sn\-SUFFIX"). This is
+handy to test multiple live\-boot based live\-systems with different
+persistent storage choices.
.IP {\fBpreseed/file\fP|\fBfile\fP}=\fIFILE\fP 4
A path to a file present on the rootfs could be used to preseed debconf
database.
.IP \fBsilent\fP 4
If you boot with the normal quiet parameter, live\-boot hides most messages
of its own. When adding silent, it hides all.
-.IP \fBtextonly\fP 4
-Start up to text\-mode shell prompts, disabling the graphical user interface.
.IP \fBtodisk\fP=\fIDEVICE\fP 4
Adding this parameter, live\-boot will try to copy the entire read\-only media
to the specified device before mounting the root filesystem. It probably
to the computer's RAM before mounting the root filesystem. This could need a
lot of ram, according to the space used by the read\-only media.
.IP \fBunion\fP=aufs|unionfs 4
+.\" FIXME
By default, live\-boot uses aufs. With this parameter, you can switch to
unionfs.
-.IP \fBxdebconf\fP 4
-Uses xdebconfigurator, if present on the rootfs, to configure X instead of
-the standard procedure (experimental).
-.IP \fBxvideomode\fP=\fIRESOLUTION\fP 4
-.\" FIXME
-Doesn't do xorg autodetection, but enforces a given resolution.
.\" FIXME
.SH "FILES (old)"
.SH DATEIEN
.IP \fB/etc/live/boot.conf\fP 4
-.IP \fB/etc/live/boot.conf.d/\fP 4
+.IP \fB/etc/live/boot.d/\fP 4
.IP \fBlive/boot.conf\fP 4
-.IP \fBlive/boot.conf.d/\fP 4
+.IP \fBlive/boot.d/\fP 4
.SH "SIEHE AUCH"
\fIlive\-snapshot\fP(1)
.PP
+\fIlive\-build\fP(7)
+.PP
\fIlive\-config\fP(7)
.PP
-\fIlive\-helper\fP(7)
+\fIlive\-tools\fP(7)
.SH HOMEPAGE
Weitere Informationen ueber live\-boot und das Debian Live Projekt koennen