-# {{{ CD Checker
-config_testcd(){
-if [ -n "$TESTCD" ]; then
- einfo "Checking CD data integrity as requested by '${WHITE}testcd${NORMAL}' boot option."
- einfo "Reading files and checking against GRML/md5sums, this may take a while..."
- echo -n "${RED}"
-
- # /linuxrc grml version:
- [ -d /cdrom/GRML ] && TESTCD_PATH=/cdrom/GRML
- # live-initramfs version:
- [ -d /live/image/GRML ] && TESTCD_PATH=/live/image/GRML
-
- if [ -n "$TESTCD_PATH" ] ; then
- ( cd "$TESTCD_PATH" ; rm -f /tmp/md5sum.log ; md5sum -c md5sums 2>&1 | tee /tmp/md5sum.log )
- else
- echo "${RED} *** Error: Could not find md5sum file. ***"
- fi
-
- if [ "$?" = "0" ]; then
- echo " ${GREEN}Everything looks OK${NORMAL}"
- else
- echo "${RED} *** CHECKSUM FAILED FOR THESE FILES: ***"
- egrep -v '(^md5sum:|OK$)' /tmp/md5sum.log
- echo "${RED} *** DATA ON YOUR CD MEDIUM IS POSSIBLY INCOMPLETE OR DAMAGED, ***${NORMAL}"
- echo "${RED} *** OR YOUR COMPUTER HAS BAD RAM. ***${NORMAL}"
- echo -n "${CYAN}Hit return to contine, or press the reset button to quit.${NORMAL}"
- read a
- fi
-
- eend 0
-fi
-}
-# }}}
-
-# {{{ hardware detection via discover
-config_discover(){
-if checkbootparam "nodisc" ; then
- ewarn "Skipping hardware detection via discover as requested on boot commandline." ; eend 0
-else
- if [ -x /sbin/discover ] ; then
- einfo "Discovering hardware. Trying to load the following modules in background:"
- eindent
- einfo "$(discover --data-path=linux/module/name --data-path=linux/modules/options --format="%s %s" --data-version=`uname -r` --enable-bus all | sort -u | xargs echo)"
- eoutdent
- /sbin/discover-modprobe -v 1>>$DEBUG 2>&1 &
- eend 0
- else
- eerror "Application discover not available. Information: udev should handle hardware recognition." ; eend 0
- fi
-fi
-}
-# }}}
-
-# {{{ hardware detection via hwinfo
-config_hwinfo(){
-if checkbootparam hwinfo >>$DEBUG 2>&1; then
- einfo "Discovering hardware via hwinfo:"
- MODULES=$(su grml hwinfo | grep "Cmd: \"modprobe" | awk '{print $5}' | sed 's/"//')
- echo -n " Loading modules: "
- for i in `echo $MODULES` ; do echo -n $i && modprobe $i ; done
- eend 0
-fi
-}
-# }}}
-
-# {{{ disable hotplug agents on request
-config_hotplug_agent(){
-if checkbootparam "noagent" ; then
- AGENT="$(getbootparam 'noagent' 2>>$DEBUG)"
- AGENTLIST=$(echo "$AGENT" | sed 's/,/\\n/g')
- AGENTNL=$(echo "$AGENT" | sed 's/,/ /g')
- einfo "Disabling hotplug-agent(s) $AGENTNL"
- for agent in $(echo -e $AGENTLIST) ; do
- mv /etc/hotplug/${agent}.rc /etc/hotplug/${agent}.norc
- done
- [ "$?" == "0" ] ; eend $?
-fi
-}
-# }}}
-
-# {{{ blacklist of hotplug-modules
-config_hotplug_blacklist(){
-if checkbootparam "black" ; then
- BLACK="$(getbootparam 'black' 2>>$DEBUG)"
- BLACKLIST=$(echo "$BLACK" | sed 's/,/\\n/g')
- BLACKNL=$(echo "$BLACK" | sed 's/,/ /g')
- einfo "Blacklisting $BLACKNL via /etc/hotplug/blacklist.d/hotplug-light"
- echo -e "$BLACKLIST" >> /etc/hotplug/blacklist.d/hotplug-light
- echo -e "$BLACKLIST" >> /etc/hotplug/blacklist
- eend 0
-fi
-}
-# }}}
-
-# {{{ run hotplug
-config_hotplug(){
-if checkbootparam "nohotplug" ; then
- ewarn "Skipping running hotplug as requested on boot commandline." ; eend 0
-else
- if [ -r /etc/init.d/hotplug ] ; then
- einfo "Starting hotplug system in background."
- /etc/init.d/hotplug start 1>>$DEBUG 2>>$DEBUG &
- eend 0
- elif [ -r /etc/init.d/hotplug-light ] ; then
- einfo "Starting hotplug-light system in background."
- /etc/init.d/hotplug-light start 1>>$DEBUG 2>>$DEBUG &
- eend 0
- else
- ewarn "No hotplug system found. Should be handled by udev. Skipping execution." ; eend 0
- fi
-fi
-}
-# }}}
-
-# {{{ blacklist specific module [ used in /etc/init.d/udev ]
-config_blacklist(){
-if checkbootparam "blacklist" ; then
- if [ -z "$INSTALLED" ]; then
- einfo "Bootoption blacklist found."
- BLACK="$(getbootparam 'blacklist' 2>>$DEBUG)"
- if [ -n "$BLACK" ] ; then
- einfo "Blacklisting module ${BLACK} via /etc/modprobe.d/grml."
- echo "# begin entry generated by config_blacklist of grml-autoconfig" >> /etc/modprobe.d/grml
- echo "blacklist $BLACK" >> /etc/modprobe.d/grml
- echo "alias $BLACK off" >> /etc/modprobe.d/grml
- echo "# end entry generated by config_blacklist of grml-autoconfig" >> /etc/modprobe.d/grml ; eend $?
- else
- eerror "No given module for blacklist found. Blacklisting will not work therefore."
- fi
- else
- ewarn "Backlisting via bootoption does not work on harddisk installations." ; eend 1
- eindent
- einfo "Please blacklist the module(s) via /etc/modprobe.d/blacklist."
- eoutdent
- fi
-fi
-}
-# }}}
-
-# {{{ ACPI
-config_acpi_apm(){
-if [ -d /proc/acpi ]; then
- if checkbootparam "noacpi"; then
- ewarn "Skipping ACPI Bios detection as requested via noacpi on boot commandline." ; eend 0
- elif checkbootparam "nogrmlacpi" ; then
- ewarn "Skipping ACPI Bios detection as requested via nogrmlacpi on boot commandline." ; eend 0
- else
- einfo "ACPI Bios found, activating modules (disable via bootoption noacpi / nogrmlacpi): "
- eindent
- found=""
- for a in /lib/modules/$KERNEL/kernel/drivers/acpi/*; do
- basename="${a##*/}"
- basename="${basename%%.*}"
- case "$basename" in *_acpi)
- egrep -qi "${basename%%_acpi}" /proc/acpi/dsdt 2>>$DEBUG || continue ;;
- esac
- modprobe $basename >>$DEBUG 2>&1 && found="yes"
- local BASE="$BASE $basename"
- done
- if [ -n "$found" ] ; then
- einfo "$BASE" ; eend 0
- else
- ewarn "(none)" ; eend 1
- fi
- if ! [ -S /var/run/acpid.socket ] ; then
- if ! [ -r /var/run/dbus/pid ] ; then
- einfo "Starting acpi daemon."
- /etc/init.d/acpid start >>$DEBUG ; eend $?
- else
- eerror "acpid error: it seems you are running d-bus/hal, but acpid needs to be started before d-bus."
- eerror "Solution: please activate acpid via /etc/runlevel.conf"
- eend 1
- fi
- else
- ewarn "acpi daemon already running."
- eend 0
- fi
- eoutdent
- fi
-else
-# APM
- if checkbootparam "noapm"; then
- ewarn "Skipping APM Bios detection as requested on boot commandline." ; eend 0
- else
- modprobe apm power_off=1 >>$DEBUG 2>&1
- if [ "$?" = "0" ] ; then
- if [ -x /etc/init.d/apmd ] ;then
- einfo "APM Bios found, enabling power management functions."
- /etc/init.d/apmd start ; eend $?
- fi
- else
- eerror "Loading apm module failed." ; eend 1
- fi
- fi
-fi
-}
-# }}}
-
-# {{{ PCMCIA Check/Setup
-# This needs to be done before other modules are being loaded (by hwsetup)
-config_pcmcia(){
-if checkbootparam "nopcmcia"; then
- ewarn "Skipping PCMCIA detection as requested on boot commandline." ; eend 0
-else
- if /usr/sbin/laptop-detect ; then
- einfo "Detected Laptop - checking for PCMCIA." && eend 0
- modprobe pcmcia_core >>$DEBUG 2>&1
- # Try Cardbus or normal PCMCIA socket drivers
- modprobe yenta_socket >>$DEBUG 2>&1 || modprobe i82365 >>$DEBUG 2>&1 || modprobe pd6729 >>$DEBUG 2>&1 || modprobe tcic >>$DEBUG 2>&1
- if [ "$?" = "0" ]; then
- modprobe ds >>$DEBUG 2>&1
- if [ -d /proc/bus/pccard ] ; then
- if [ -x /sbin/cardmgr ] ; then
- einfo "PCMCIA found, starting cardmgr."
- cardmgr >>$DEBUG 2>&1 && sleep 6 && eend 0
- else
- eerror "No cardmgr found. Make sure package pcmciautils is installed, it should handle it instead." ; eend 1
- fi
- fi
- fi
- fi
-fi
-}
-# }}}
-
-# {{{ run software synthesizer via speakup
-config_swspeak(){
-if checkbootparam swspeak ; then
- if [ -d /proc/speakup/ ] ; then
- einfo "Bootoption swspeak found. Kernel supports speakup." ; eend 0
- eindent
- if [ -x /etc/init.d/speech-dispatcher ] ; then
- einfo "Starting speech-dispatcher."
- /etc/init.d/speech-dispatcher start 1>>DEBUG ; eend $?
- einfo "Activating sftsyn in Kernel."
- echo sftsyn >/proc/speakup/synth_name ; eend $?
- einfo "Just run swspeak if you want to use software synthesizer via speakup."
- flite -o play -t "Finished activating software speakup. Just run swspeak when booting finished."
- else
- eerror "speech-dispatcher not available. swspeak will not work without it." ; eend 1
- flite -o play -t "speech-dispatcher not available. speakup will not work without it."
- fi
- eoutdent
- else
- eerror "Kernel does not seem to support speakup. Skipping swspeak." ; eend 1
- flite -o play -t "Kernel does not seem to support speakup. Sorry."
- fi
-fi
-}
-# }}}
-
-# {{{ Check for blind option or brltty
-config_blind(){
-BLIND=""
-checkbootparam "blind" && BLIND="yes"
-BRLTTY="$(getbootparam brltty 2>>$DEBUG)"
-
-if [ -n "$BLIND" -o -n "$BRLTTY" ]; then
- if [ -x /sbin/brltty ]; then
- # Blind option detected, start brltty now.
- # modprobe serial_core parport_serial generic_serial && echo "done"
- CMD=brltty
- BRLTYPE=""
- BRLDEV=""
- BRLTEXT=""
- if [ -n "$BRLTTY" ]; then
- # Extra options
- BRLTYPE="${BRLTTY%%,*}"
- R="${BRLTTY#*,}"
- if [ -n "$R" -a "$R" != "$BRLTTY" ]; then
- BRLTTY="$R"
- BRLDEV="${BRLTTY%%,*}"
- R="${BRLTTY#*,}"
- if [ -n "$R" -a "$R" != "$BRLTTY" ]; then
- BRLTTY="$R"
- BRLTEXT="${BRLTTY%%,*}"
- R="${BRLTTY#*,}"
- fi
- fi
- fi
- [ -n "$BRLTYPE" ] && CMD="$CMD -b $BRLTYPE"
- [ -n "$BRLDEV" ] && CMD="$CMD -d $BRLDEV"
- [ -n "$BRLTEXT" ] && CMD="$CMD -t $BRLTEXT"
- einfo "Starting braille-display manager."
-# ( exec $CMD & )
- ( sh -c "$CMD" & )
- sleep 2 && BLINDSOUND="yes"
- eend 0
- fi
-fi
-}
-# }}}
-
-# {{{ Interactive configuration
-config_interactive(){
-if [ -n "$INTERACTIVE" ] ; then
-einfo "Entering interactive configuration second stage."
-
- echo " ${GREEN}Your console keyboard defaults to: ${MAGENTA}${KEYTABLE}"
- echo -n "${CYAN}Do you want to (re)configure your console keyboard?${NORMAL} [Y/n] "
- read a
- [ "$a" != "n" ] && /usr/sbin/dpkg-reconfigure console-data ; eend $?
-
- echo -n "${CYAN}Do you want to (re)configure your soundcard?${NORMAL} [Y/n] "
- read a
- [ "$a" != "n" ] && alsaconf && ( exec aumix -m 0 >>$DEBUG 2>&1 & ) ; eend $?
-
- echo -n "${CYAN}Do you want to (re)configure your graphics (X11) subsystem?${NORMAL} [Y/n] "
- read a
- [ "$a" != "n" ] && xorgcfg -textmode ; eend $?
- echo " ${GREEN}Interactive configuration finished. Everything else should be fine for now.${NORMAL}"
-fi
-eend 0
-}
-# }}}
-
-# {{{ AGP
-config_agp(){
-if checkbootparam forceagp ; then
-# Probe for AGP. Hope this can fail safely
- stringinfile "AGP" "/proc/pci" 2>>$DEBUG && { modprobe agpgart || modprobe agpgart agp_try_unsupported=1; } >>$DEBUG 2>&1 && einfo "AGP bridge detected." ; eend 0
-fi
-}
-# }}}
-
-# {{{ automount(er)
-config_automounter(){
-if checkbootparam automounter ; then
- RUNLEVEL="$(runlevel)"
- AUTOMOUNTER=""
- [ -x /etc/init.d/autofs ] && [ "$RUNLEVEL" != "N 1" ] && [ "$RUNLEVEL" != "N S" ] && AUTOMOUNTER="yes"
-
-addautomount(){
-# /dev/ice options
- d="${1##*/}"
- if [ -n "$AUTOMOUNTER" ]; then
- [ -d "/mnt/$d" -a ! -L "/mnt/$d" ] && rmdir /mnt/$d
- [ -d "/mnt/auto/$d" ] || mkdir -p "/mnt/auto/$d"
- [ -L "/mnt/$d" ] || ln -s "/mnt/auto/$d" "/mnt/$d"
- anew="$d -fstype=auto,$2 :$i"
- stringinfile "$anew" "/etc/auto.mnt" || echo "$anew" >> /etc/auto.mnt
- AUTOMOUNTS="$AUTOMOUNTS $d"
- new="$1 /mnt/auto/$d auto users,noauto,exec,$2 0 0"
- else
- [ -d /mnt/$d ] && mkdir -p /mnt/$d
- new="$1 /mnt/$d auto users,noauto,exec,$2 0 0"
- fi
- stringinfile "$new" "/etc/fstab" || echo "$new" >> /etc/fstab
-}
-
- AUTOMOUNTS="floppy cdrom"
-# Add new devices to /etc/fstab and /etc/auto.mnt
- for i in /dev/cdrom?*; do
- if [ -L $i ]; then
- addautomount "$i" "ro"
- fi
- done
-fi
-
-if [ -n "$AUTOMOUNTER" ]; then
-# Check for floppy dir, reinstall with automounter
- [ -d /mnt/floppy -a ! -L /mnt/floppy ] && rmdir /mnt/floppy
- [ -d /mnt/auto/floppy ] || mkdir -p /mnt/auto/floppy
- [ -L /mnt/floppy ] || ln -s /mnt/auto/floppy /mnt/floppy
- [ -d /mnt/cdrom -a ! -L /mnt/cdrom ] && rmdir /mnt/cdrom
- [ -d /mnt/auto/cdrom ] || mkdir -p /mnt/auto/cdrom
- [ -L /mnt/cdrom ] || ln -s /mnt/auto/cdrom /mnt/cdrom
- rm -f /etc/fstab.new
-# Replace paths from bootfloppy
- sed 's|/mnt/cdrom|/mnt/auto/cdrom|g;s|/mnt/floppy|/mnt/auto/floppy|g' /etc/fstab > /etc/fstab.new
- mv -f /etc/fstab.new /etc/fstab
-# Start automounter now
- einfo "Starting automounter for ${AUTOMOUNTS}."
- /etc/init.d/autofs start >>$DEBUG ; eend $?
-fi
-}
-# }}}
-
-# {{{ Collect partitions from /proc/partitions first for enabling DMA
-check_partitions(){
-partitions=""
-IDEDISKS=""
-while read major minor blocks partition relax; do
- partition="${partition##*/}"
- [ -z "$partition" -o ! -e "/dev/$partition" ] && continue
- case "$partition" in
- hd?) IDEDISKS="$IDEDISKS $partition";; # IDE Harddisk, entire disk
- sd?) ;; # SCSI Harddisk, entire disk
-# [hs]d*) partitions="$partitions /dev/$partition";; # IDE or SCSI disk partition
- [hs]d*|ub*) partitions="$partitions /dev/$partition";; # IDE, USB or SCSI disk partition
- esac
-done <<EOT
-$(awk 'BEGIN{old="__start"}{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print $0}}}' /proc/partitions)
-EOT
-}
-check_partitions 1>/dev/null 2>&1 # avoid output "check_partitions:3: read-only file system"
-# }}}
-
-# {{{ Enable DMA for all IDE drives now if not disabled
-# Notice: Already done by linuxrc, but make sure it's done also on harddisk-installed systems
-config_dma(){
-if checkbootparam "nodma"; then
- ewarn "Skipping DMA accelleration as requested on boot commandline." ; eend 0
-else
- for d in $(cd /proc/ide 2>>$DEBUG && echo hd[a-z]); do
- if test -d /proc/ide/$d; then
- if egrep -q 'using_dma[ \t]+0' /proc/ide/$d/settings 2>>$DEBUG; then
- MODEL="$(cat /proc/ide/$d/model 2>>$DEBUG)"
- test -z "$MODEL" && MODEL="[GENERIC IDE DEVICE]"
- einfo "Enabling DMA acceleration for: ${WHITE}$d ${YELLOW}[${MODEL}]${NORMAL}"
- echo "using_dma:1" >/proc/ide/$d/settings
- eend 0
- fi
- fi
- done
-fi
-}
-# }}}
-
-# {{{ Start creating /etc/fstab with HD partitions and USB SCSI devices now
-config_fstab(){