Disable specific umask settings by default.

[grml-etc-core.git] / doc / grmlzshrc.t2t

diff --git a/doc/grmlzshrc.t2t b/doc/grmlzshrc.t2t
index 2e879c3..1d810ab 100644 (file)
--- a/doc/grmlzshrc.t2t
+++ b/doc/grmlzshrc.t2t
@@ -1,6 +1,6 @@
 GRMLZSHRC
 
 GRMLZSHRC
 

-Oktober, 2009
+June, 2010

 
 %!target: man
 %!postproc(man): "^(\.TH.*) 1 "  "\1 5 "
 
 %!target: man
 %!postproc(man): "^(\.TH.*) 1 "  "\1 5 "


@@ -26,10 +26,7 @@ features are enabled in every version).
 //grmlzshrc// behaves differently depending on which user loads it. For the
 root user (**EUID** == 0) only a subset of features is loaded by default. This
 behaviour can be altered by setting the **GRML_ALWAYS_LOAD_ALL** STARTUP
 //grmlzshrc// behaves differently depending on which user loads it. For the
 root user (**EUID** == 0) only a subset of features is loaded by default. This
 behaviour can be altered by setting the **GRML_ALWAYS_LOAD_ALL** STARTUP

-VARIABLE (see below). Also the umask(1) for the root user is set to 022,
-while for regular users it is set to 002. So read/write permissions
-for the regular user and her group are set for new files (keep that
-in mind on systems, where regular users share a common group).
+VARIABLE (see below).

 
 = STARTUP VARIABLES =
 Some of the behaviour of //grmlzshrc// can be altered by setting certain shell
 
 = STARTUP VARIABLES =
 Some of the behaviour of //grmlzshrc// can be altered by setting certain shell


@@ -58,6 +55,13 @@ and defaults to "/usr/share/command-not-found/command-not-found".
 Set this to zero to remove items in zsh config, which do not work in
 grml-small.
 
 Set this to zero to remove items in zsh config, which do not work in
 grml-small.
 

+: **HISTFILE**
+Where zsh saves the history. Default: ${HOME}/.zsh_history.
+
+: **HISTSIZE**
+Number of commands to be kept in the history. On a grml-CD this defaults to
+500, on a hard disk installation to 5000.
+

 : **MAILCHECK**
 Sets the frequency in seconds for zsh to check for new mail. Defaults to 30.
 A value of zero turns off checking.
 : **MAILCHECK**
 Sets the frequency in seconds for zsh to check for new mail. Defaults to 30.
 A value of zero turns off checking.


@@ -77,6 +81,14 @@ that are run before every command (setting xterm/screen titles etc.).
 Show time (user, system and cpu) used by external commands, if they run longer
 than the defined number of seconds (default: 5).
 
 Show time (user, system and cpu) used by external commands, if they run longer
 than the defined number of seconds (default: 5).
 

+: **SAVEHIST**
+Number of commands to be stored in ${HISTFILE}. Defaults to 1000 on a grml-CD
+and to 10000 on an installation on hard disk.
+
+: **watch**
+As in tcsh(1) an array of login/logout events to be reported by the shell
+builtin "log". For details see zshparam(1). Defaults to (notme root).
+

 : **ZSH_NO_DEFAULT_LOCALE**
 Import "/etc/default/locale", if set to zero (default).
 
 : **ZSH_NO_DEFAULT_LOCALE**
 Import "/etc/default/locale", if set to zero (default).
 


@@ -285,6 +297,10 @@ of the terminal they are running in.
 If not already set, sets the default editor. Falls back to vi(1),
 if vim(1) is not available.
 
 If not already set, sets the default editor. Falls back to vi(1),
 if vim(1) is not available.
 

+: **LESS_TERMCAP_***
+Some environment variables that add colour support to less(1) for viewing
+man pages. See termcap(5) for details.
+

 : **MAIL**
 The mailbox file for the current user is set to /var/mail/$USER, if not
 already set otherwise.
 : **MAIL**
 The mailbox file for the current user is set to /var/mail/$USER, if not
 already set otherwise.


@@ -415,6 +431,11 @@ Converts plaintext files to HTML using vim. The output is written to
 If 915resolution is available, issues a warning to the user to run it instead
 to modify the resolution on intel graphics chipsets.
 
 If 915resolution is available, issues a warning to the user to run it instead
 to modify the resolution on intel graphics chipsets.
 

+: **accessed()**
+Lists files in current directory, which have been accessed within the
+last N days. N is an integer to be passed as first and only argument.
+If no argument is specified N is set to 1.
+

 : **agoogle()**
 Searches for USENET postings from authors using google groups.
 
 : **agoogle()**
 Searches for USENET postings from authors using google groups.
 


@@ -425,10 +446,22 @@ Sets all ulimit values to "unlimited".
 Prints a colored table of available ansi color codes (to be used in escape
 sequences) and the colors they represent.
 
 Prints a colored table of available ansi color codes (to be used in escape
 sequences) and the colors they represent.
 

+: **any()**
+Lists processes matching given pattern.
+

 : **aoeu(), asdf(), uiae()**
 Pressing the 'asdf' keys toggles between dvorak or neon and us keyboard
 layout.
 
 : **aoeu(), asdf(), uiae()**
 Pressing the 'asdf' keys toggles between dvorak or neon and us keyboard
 layout.
 

+: **apache2-ssl-certificate()**
+Advices the user how to create self signed certificates.
+
+: **asc()**
+Login on the host provided as argument using autossh. Then reattach a GNU screen
+session if a detached session is around or detach a currently attached screen or
+else start a new screen.  This is especially useful for roadwarriors using GNU
+screen and ssh.
+

 : **audioburn()**
 Burns the files in ~/ripps (see audiorip() below) to an audio CD.
 Then prompts the user if she wants to remove that directory. You might need
 : **audioburn()**
 Burns the files in ~/ripps (see audiorip() below) to an audio CD.
 Then prompts the user if she wants to remove that directory. You might need


@@ -451,6 +484,11 @@ The brltty(1) program provides a braille display, so a blind person can access
 the console screen. This wrapper function works around problems with some
 environments (f. e. utf8).
 
 the console screen. This wrapper function works around problems with some
 environments (f. e. utf8).
 

+: **cdiff()**
+Runs a recursive diff(1) over two given directories trying to find the
+smallest set of changes. Three lines of context will be printed and binary
+files filtered out.
+

 : **cdrecord()**
 If the original cdrecord is not installed, issues a warning to the user to
 use the wodim binary instead. Wodim is the debian fork of Joerg Schillings
 : **cdrecord()**
 If the original cdrecord is not installed, issues a warning to the user to
 use the wodim binary instead. Wodim is the debian fork of Joerg Schillings


@@ -474,9 +512,27 @@ grml systems with autologin.
 Changes current directory to the one supplied by argument and lists the files
 in it, including file names starting with ".".
 
 Changes current directory to the one supplied by argument and lists the files
 in it, including file names starting with ".".
 

-: **d()**
-Presents a numbered listing of the directory stack. Then changes current
-working directory to the one chosen by the user.
+: **cvsa()**
+Adds and commits the given files using cvs(1). The commit message will be
+'initial checkin'.
+
+: **cvsd()**
+Shows a cvs diff of the arguments in $PAGER.
+
+: **cvsl()**
+Shows the cvs log in $PAGER.
+
+: **cvsq()**
+Runs a cvs update.
+
+: **cvsr()**
+Generates a changelog using rcs2log and shows it in $PAGER.
+
+: **cvss()**
+Shows cvs status of given files.
+
+: **dchange()**
+Shows the changelog of given package in $PAGER.

 
 : **debbug()**
 Searches the Debian bug tracking system (bugs.debian.org) for Bug numbers,
 
 : **debbug()**
 Searches the Debian bug tracking system (bugs.debian.org) for Bug numbers,


@@ -489,6 +545,11 @@ Shows bug report for debian given by number in mailbox format.
 Tells the user to use grml-debootstrap, if she wants to install debian to
 harddisk.
 
 Tells the user to use grml-debootstrap, if she wants to install debian to
 harddisk.
 

+: **deswap()**
+A trick from $LINUX-KERNELSOURCE/Documentation/power/swsusp.txt. It brings
+back interactive responsiveness after suspend, when the system is swapping
+heavily.
+

 : **dirspace()**
 Shows the disk usage of the directories given in human readable format;
 defaults to $path.
 : **dirspace()**
 Shows the disk usage of the directories given in human readable format;
 defaults to $path.


@@ -496,10 +557,31 @@ defaults to $path.
 : **disassemble()**
 Translates C source code to assembly and ouputs both.
 
 : **disassemble()**
 Translates C source code to assembly and ouputs both.
 

+: **dmoz()**
+Searches for the first argument (optional) in the Open Directory Project
+(See http://www.dmoz.org/docs/en/about.html).
+
+: **dnews()**
+Shows the NEWS file for the given package in $PAGER.
+

 : **doc()**
 Takes packagename as argument. Sets current working directory to
 /usr/share/doc/<packagename> and prints out a directory listing.
 
 : **doc()**
 Takes packagename as argument. Sets current working directory to
 /usr/share/doc/<packagename> and prints out a directory listing.
 

+: **dwicti()**
+Looks up the first argument (optional) in the german Wiktionary
+which is an online dictionary (See: http://de.wiktionary.org/).
+
+: **edalias()**
+Edit given alias.
+
+: **edfunc()**
+Edit given shell function.
+
+: **ewicti()**
+Looks up the first argument (optional in the english Wiktionary
+which is an online dictionary (See: http://en.wiktionary.org/).
+

 : **exirename()**
 Renames image files based on date/time informations in their exif headers.
 
 : **exirename()**
 Renames image files based on date/time informations in their exif headers.
 


@@ -513,6 +595,9 @@ Switches the key combinations for changing current workspace under fluxbox(1)
 from Alt-[0-9] to Alt-F[0-9] and vice versa by rewriting $HOME/.fluxbox/keys.
 Requires the window manager to reread configuration to take effect.
 
 from Alt-[0-9] to Alt-F[0-9] and vice versa by rewriting $HOME/.fluxbox/keys.
 Requires the window manager to reread configuration to take effect.
 

+: **freload()**
+Reloads an autoloadable shell function (See autoload in zshbuiltins(1)).
+

 : **genthumbs()**
 A simple thumbnails generator. Resizes images (i. e. files that end in ".jpg",
 ".jpeg", ".gif" or ".png") to 100x200. Output files are named "thumb-<original
 : **genthumbs()**
 A simple thumbnails generator. Resizes images (i. e. files that end in ".jpg",
 ".jpeg", ".gif" or ".png") to 100x200. Output files are named "thumb-<original


@@ -521,35 +606,17 @@ thumbnails as clickable links to the respective original file.
 //Warning:// On start genthumbs() silently removes a possibly existing "index.html"
 and all files and/or directories beginning with "thumb-" in current directory!
 
 //Warning:// On start genthumbs() silently removes a possibly existing "index.html"
 and all files and/or directories beginning with "thumb-" in current directory!
 

-: **getair()**
-Tries to download, unpack and run AIR (imaging software) version 1.2.8.
-
-: **getgizmo()**
-Tries to download and install Gizmo (VoIP software) for Debian.
-
-: **getskype()**
-Tries to download and install Skype (VoIP software) for Debian.
-
-: **getskypebeta()**
-Downloads and installs newer version of Skype.
-
-: **getxlite()**
-Tries to download and unpack X-lite (VoIP software) from counterpath.com into
-~/tmp.
+: **get_tw_cli()**
+Fetches 3ware RAID controller software using get_3ware(1).

 
 

-: **git-get-diff()**
-Opens a specific git commitdiff from kernel.org in default browser. Tree is
-chosen by the environment variable GITTREE which defaults to Linus Torvalds'
-kernel tree.
+: **gex()**
+Performs an exact (i. e. quoted) web search using Google.

 
 

-: **git-get-commit()**
-Opens a specific git commit from kernel.org in default browser. The tree to
-fetch from is controlled by the environment variable GITTREE which defaults
-to Linus Torvalds' kernel tree.
+: **ggogle()**
+Searches the arguments on Google Groups, a web to USENET gateway.

 
 

-: **git-get-plaindiff()**
-Fetches specific git diff from kernel.org. The tree is controlled by the
-environment variable GITTREE which defaults to Linus Torvalds' kernel tree.
+: **google()**
+Searches the search engine Google using arguments as search string.

 
 : **greph()**
 Searches the zsh command history for a regular expression.
 
 : **greph()**
 Searches the zsh command history for a regular expression.


@@ -558,6 +625,13 @@ Searches the zsh command history for a regular expression.
 Prints the hexadecimal representation of the number supplied as argument
 (base ten only).
 
 Prints the hexadecimal representation of the number supplied as argument
 (base ten only).
 

+: **hgdi()**
+Use GNU diff with options -ubwd for mercurial.
+
+: **hgstat()**
+Displays diffstat between the revision given as argument and tip (no
+argument means last revision).
+

 : **hidiff()**
 Outputs highlighted diff; needs highstring(1).
 
 : **hidiff()**
 Outputs highlighted diff; needs highstring(1).
 


@@ -569,6 +643,10 @@ for detailed usage information.
 Queries IMAP server (first parameter) for its capabilities. Takes
 port number as optional second argument.
 
 Queries IMAP server (first parameter) for its capabilities. Takes
 port number as optional second argument.
 

+: **ipv6-tunnel()**
+Sets up an IPv6 tunnel on interface sit1. Needs one argument -
+either "start", "stop" or "status".
+

 : **is4()**
 Returns true, if zsh version is equal or greater than 4, else false.
 
 : **is4()**
 Returns true, if zsh version is equal or greater than 4, else false.
 


@@ -606,6 +684,9 @@ environment variables to UTF-8.
 : **isutfenv()**
 Returns true, if run within an utf environment, else false.
 
 : **isutfenv()**
 Returns true, if run within an utf environment, else false.
 

+: **iwclient()**
+Searches a wireless interface and runs dhclient(8) on it.
+

 : **lcheck()**
 Lists libraries that define the symbol containing the string given as
 parameter.
 : **lcheck()**
 Lists libraries that define the symbol containing the string given as
 parameter.


@@ -614,6 +695,10 @@ parameter.
 Lists images (i. e. files ending with ".jpg", ".gif" or ".png") in current
 directory.
 
 Lists images (i. e. files ending with ".jpg", ".gif" or ".png") in current
 directory.
 

+: **linenr()**
+Prints specified range of (numbered) lines of a file.
+Usage: linenr <start>[,<end>] <file>
+

 : **makereadable()**
 Creates a PostScript and a PDF file (basename as first argument) from
 source code files.
 : **makereadable()**
 Creates a PostScript and a PDF file (basename as first argument) from
 source code files.


@@ -621,6 +706,10 @@ source code files.
 : **man2()**
 Displays manpage in a streched style.
 
 : **man2()**
 Displays manpage in a streched style.
 

+: **manzsh()**
+Shows the zshall manpage and jumps to the first match of the regular
+expression optionally given as argument (Needs qma(1)).
+

 : **mcd()**
 Creates directory including parent directories, if necessary. Then changes
 current working directory to it.
 : **mcd()**
 Creates directory including parent directories, if necessary. Then changes
 current working directory to it.


@@ -632,6 +721,9 @@ output (unified format) to a timestamped file.
 : **memusage()**
 Prints the summarized memory usage in bytes.
 
 : **memusage()**
 Prints the summarized memory usage in bytes.
 

+: **mggogle()**
+Searches Google Groups for a USENET message-ID.
+

 : **minimal-shell()**
 Spawns a minimally set up MirBSD Korn shell. It references no files in /usr,
 so that file system can be unmounted.
 : **minimal-shell()**
 Spawns a minimally set up MirBSD Korn shell. It references no files in /usr,
 so that file system can be unmounted.


@@ -654,14 +746,33 @@ Creates a directory with first parameter as name inside $MAILDIR_ROOT
 Runs "make install" and logs the output under ~/.errorlogs/; useful for
 a clean deinstall later.
 
 Runs "make install" and logs the output under ~/.errorlogs/; useful for
 a clean deinstall later.
 

-: **new()**
+: **modified()**

 Lists files in current directory, which have been modified within the
 last N days. N is an integer to be passed as first and only argument.
 If no argument is specified N is set to 1.
 
 Lists files in current directory, which have been modified within the
 last N days. N is an integer to be passed as first and only argument.
 If no argument is specified N is set to 1.
 

+: **netcraft()**
+Asks netcraft.com for informations about the site given as argument.
+
+: **nt()**
+A helper function for the "e" glob qualifier to list all files newer
+than a reference file.
+\
+Example usages:
+```
+% NTREF=/reference/file
+% ls -l *(e:nt:)
+% # Inline:
+% ls -l *(e:'nt /reference/file':)
+```
+

 : **ogg2mp3_192()**
 Recodes an ogg file to mp3 with a bitrate of 192.
 
 : **ogg2mp3_192()**
 Recodes an ogg file to mp3 with a bitrate of 192.
 

+: **oleo()**
+Translates the given word using the english - german online
+dictionary dict.leo.org.
+

 : **peval()**
 Evaluates a perl expression; useful as command line
 calculator, therefore also available as "calc".
 : **peval()**
 Evaluates a perl expression; useful as command line
 calculator, therefore also available as "calc".


@@ -669,6 +780,10 @@ calculator, therefore also available as "calc".
 : **plap()**
 Lists all occurrences of the string given as argument in current $PATH.
 
 : **plap()**
 Lists all occurrences of the string given as argument in current $PATH.
 

+: **profile()**
+Runs a command in $SHELL with profiling enabled (See startup variable
+ZSH_PROFILE_RC above).
+

 : **purge()**
 Removes typical temporary files (i. e. files like "*~", ".*~", "#*#", "*.o",
 "a.out", "*.core", "*.cmo", "*.cmi" and ".*.swp") from current directory.
 : **purge()**
 Removes typical temporary files (i. e. files like "*~", ".*~", "#*#", "*.o",
 "a.out", "*.core", "*.cmo", "*.cmi" and ".*.swp") from current directory.


@@ -695,6 +810,9 @@ findings in default pager. On exit of the pager the user is prompted for a
 number. The shells readline buffer is then filled with the corresponding
 command line.
 
 number. The shells readline buffer is then filled with the corresponding
 command line.
 

+: **setenv()**
+Reimplementation of the csh(1) builtin setenv.
+

 : **show-archive()**
 Lists the contents of a (compressed) archive with the appropriate programs.
 The choice is made along the filename extension.
 : **show-archive()**
 Lists the contents of a (compressed) archive with the appropriate programs.
 The choice is made along the filename extension.


@@ -709,6 +827,9 @@ Shows the content of a zip archive in default pager.
 Tries to uncompress/unpack given file with the appropriate programs. The
 choice is made along the filename ending.
 
 Tries to uncompress/unpack given file with the appropriate programs. The
 choice is made along the filename ending.
 

+: **sll()**
+Prints details of symlinks given as arguments.
+

 : **slow_print()**
 Prints the arguments slowly by sleeping 0.08 seconds between each character.
 
 : **slow_print()**
 Prints the arguments slowly by sleeping 0.08 seconds between each character.
 


@@ -745,14 +866,19 @@ certificate. First and only parameter must be a file containing a
 certificate. Use /dev/stdin as file if you want to pipe a certificate
 to this function.
 
 certificate. Use /dev/stdin as file if you want to pipe a certificate
 to this function.
 

-: **startx()**
-Initializes an X session using startx(1) if /etc/X11/xorg.conf exists, else
-issues a Warning to use the grml-x(1) script. Can be overridden by using
-/usr/bin/startx directly.
+: **Start(), Restart(), Stop(), Force-Reload(), Reload()**
+Functions for controlling daemons.
+```
+Example usage:
+% Restart ssh
+```

 
 : **status()**
 Shows some information about current system status.
 
 
 : **status()**
 Shows some information about current system status.
 

+: **swiki()**
+Searches articles in the german Wikipedia for the term given as argument.
+

 : **swspeak()**
 Sets up software synthesizer by calling swspeak-setup(8). Kernel boot option
 swspeak must be set for this to work.
 : **swspeak()**
 Sets up software synthesizer by calling swspeak-setup(8). Kernel boot option
 swspeak must be set for this to work.


@@ -760,6 +886,9 @@ swspeak must be set for this to work.
 : **trans()**
 Translates a word from german to english (-D) or vice versa (-E).
 
 : **trans()**
 Translates a word from german to english (-D) or vice versa (-E).
 

+: **uchange()**
+Shows upstreams changelog of a given package in $PAGER.
+

 : **udiff()**
 Makes a unified diff of the command line arguments trying hard to find a
 smaller set of changes. Descends recursively into subdirectories. Ignores
 : **udiff()**
 Makes a unified diff of the command line arguments trying hard to find a
 smaller set of changes. Descends recursively into subdirectories. Ignores


@@ -791,15 +920,32 @@ line options, she always wants, in her .zshrc.local.
 : **vman()**
 Use vim(1) as manpage reader.
 
 : **vman()**
 Use vim(1) as manpage reader.
 

+: **whatwhen()**
+Searches the history for a given pattern and lists the results by date.
+The first argument is the search pattern. The second and third ones are
+optional and denote a search range (default: -100).
+
+: **weather()**
+Retrieves and prints weather information from "http://weather.noaa.gov".
+The first and only argument is the ICAO code for the desired station.
+For a list of ICAO codes see
+"http://en.wikipedia.org/wiki/List_of_airports_by_ICAO_code".
+
+: **wikide()**
+Looks up the argument on Wikipedia (german).
+
+: **wikien()**
+Looks up the argument on Wikipedia (english).
+
+: **wodeb()**
+Searches the list of official debian packages for the term given as
+first argument. The optional second argument denotes the distribution
+(stable, testing or unstable) and defaults to unstable.
+

 : **xcat()**
 Tries to cat(1) file(s) given as parameter(s). Always returns true.
 See also xunfunction() below.
 
 : **xcat()**
 Tries to cat(1) file(s) given as parameter(s). Always returns true.
 See also xunfunction() below.
 

-: **xinit()**
-Initializes an X session using xinit(1) if /etc/X11/xorg.conf exists, else
-issues a Warning to use the grml-x(1) script. Can be overridden by using
-/usr/bin/xinit directly.
-

 : **xsource()**
 Tries to source the file(s) given as parameter(s). Always returns true.
 See zshbuiltins(1) for a detailed description of the source command.
 : **xsource()**
 Tries to source the file(s) given as parameter(s). Always returns true.
 See zshbuiltins(1) for a detailed description of the source command.


@@ -901,10 +1047,19 @@ while watching a movie.
 : **CO** (//./configure//)
 Prepares compilation for building program from source.
 
 : **CO** (//./configure//)
 Prepares compilation for building program from source.
 

+: **cp** (//nocorrect cp//)
+cp(1) without spelling correction.
+

 : **da** (//du -sch//)
 Prints the summarized disk usage of the arguments as well as a grand total
 in human readable format.
 
 : **da** (//du -sch//)
 Prints the summarized disk usage of the arguments as well as a grand total
 in human readable format.
 

+: **dbp** (//dpkg-buildpackage//)
+Builds binary or source packages from sources (See: dpkg-buildpackage(1)).
+
+: **debs-by-size** (//grep-status -FStatus -sInstalled-Size,Package -n "install ok installed" | paste -sd "  \n" | sort -rn//)
+Prints installed Packages sorted by size (descending).
+

 : **default** (//echo -en [ escape sequence ]//)
 Sets font of xterm to "-misc-fixed-medium-r-normal-*-*-140-*-*-c-*-iso8859-15"
 using escape sequence.
 : **default** (//echo -en [ escape sequence ]//)
 Sets font of xterm to "-misc-fixed-medium-r-normal-*-*-140-*-*-c-*-iso8859-15"
 using escape sequence.


@@ -924,6 +1079,10 @@ can watch videos on a virtual tty.
 : **g** (//git//)
 Revision control system by Linus Torvalds.
 
 : **g** (//git//)
 Revision control system by Linus Torvalds.
 

+: **ge** (//grep-excuses//)
+Searches the testing excuses files for a specific maintainer (See:
+grep-excuses(1)).
+

 : **grep** (//grep --color=auto//)
 Shows grep output in nice colors, if available.
 
 : **grep** (//grep --color=auto//)
 Shows grep output in nice colors, if available.
 


@@ -936,6 +1095,9 @@ Scans for new devices and updates /etc/fstab according to the findings.
 : **grml-version** (//cat /etc/grml_version//)
 Prints version of running grml.
 
 : **grml-version** (//cat /etc/grml_version//)
 Prints version of running grml.
 

+: **hbp** (//hg-buildpackage//)
+Helper program to maintain Debian packages with mercurial.
+

 : **http** (//python -m SimpleHTTPServer//)
 Basic HTTP server implemented in python. Listens on port 8000/tcp and
 serves current directory. Implements GET and HEAD methods.
 : **http** (//python -m SimpleHTTPServer//)
 Basic HTTP server implemented in python. Listens on port 8000/tcp and
 serves current directory. Implements GET and HEAD methods.


@@ -955,6 +1117,9 @@ Runs the function H-Glob() to expand or explain wildcards.
 : **hide** (//echo -en [ escape sequence ]//)
 Tries to hide xterm window using escape sequence.
 
 : **hide** (//echo -en [ escape sequence ]//)
 Tries to hide xterm window using escape sequence.
 

+: **hidiff** (//histring -fE '^Comparing files .*|^diff .*' | histring -c yellow -fE '^\-.*' | histring -c green -fE '^\+.*'//)
+If histring(1) is installed, highlight important stuff in diff(1) output.
+

 : **huge** (//echo -en [ escape sequence ]//)
 Sets huge font in xterm ("-misc-fixed-medium-r-normal-*-*-210-*-*-c-*-iso8859-15")
 using escape sequence.
 : **huge** (//echo -en [ escape sequence ]//)
 Sets huge font in xterm ("-misc-fixed-medium-r-normal-*-*-210-*-*-c-*-iso8859-15")
 using escape sequence.


@@ -985,6 +1150,9 @@ if available. Includes file names starting with "." except "." and
 : **ll** (//ls -l --color=auto//)
 Lists files in long colored output format.
 
 : **ll** (//ls -l --color=auto//)
 Lists files in long colored output format.
 

+: **llog** (//$PAGER /var/log/syslog//)
+Opens syslog in pager.
+

 : **ls** (//ls -b -CF --color=auto//)
 Lists directory printing octal escapes for nongraphic characters.
 Entries are listed by columns and an indicator for file type is appended
 : **ls** (//ls -b -CF --color=auto//)
 Lists directory printing octal escapes for nongraphic characters.
 Entries are listed by columns and an indicator for file type is appended


@@ -1029,11 +1197,30 @@ Lists only executable files.
 : **md** (//mkdir -p//)
 Creates directory including parent directories, if necessary
 
 : **md** (//mkdir -p//)
 Creates directory including parent directories, if necessary
 

+: **mdstat** (//cat /proc/mdstat//)
+Lists all active md (i.e. linux software raid) devices with some information
+about them.
+

 : **medium** (//echo -en [ escape sequence ]//)
 Sets medium sized font
 ("-misc-fixed-medium-r-normal--13-120-75-75-c-80-iso8859-15") in xterm
 using escape sequence.
 
 : **medium** (//echo -en [ escape sequence ]//)
 Sets medium sized font
 ("-misc-fixed-medium-r-normal--13-120-75-75-c-80-iso8859-15") in xterm
 using escape sequence.
 

+: **mkdir** (//nocorrect mkdir//)
+mkdir(1) without spelling correction.
+
+: **mq** (//hg -R $(readlink -f $(hg root)/.hg/patches)//)
+Executes the commands on the versioned patch queue from current repository.
+
+: **mv** (//nocorrect mv//)
+mv(1) without spelling correction.
+
+: **rd** (//rmdir//)
+Short rmdir(1) (remove directory).
+
+: **rm** (//nocorrect rm//)
+rm(1) without spelling correction.
+

 : **screen** (///usr/bin/screen -c ${HOME}/.screenrc//)
 If invoking user is root, starts screen session with /etc/grml/screenrc
 as config file. If invoked by a regular user, start a screen session
 : **screen** (///usr/bin/screen -c ${HOME}/.screenrc//)
 If invoking user is root, starts screen session with /etc/grml/screenrc
 as config file. If invoked by a regular user, start a screen session


@@ -1055,6 +1242,12 @@ anybody else.
 Grants read, write and execute permission of a file to the owner and
 read-only plus execute permission to anybody else.
 
 Grants read, write and execute permission of a file to the owner and
 read-only plus execute permission to anybody else.
 

+: **S** (//screen//)
+Short for screen(1).
+
+: **s** (//ssh//)
+Short for ssh(1).
+

 : **semifont** (//echo -en [ escape sequence ]//)
 Sets font of xterm to
 "-misc-fixed-medium-r-semicondensed-*-*-120-*-*-*-*-iso8859-15" using
 : **semifont** (//echo -en [ escape sequence ]//)
 Sets font of xterm to
 "-misc-fixed-medium-r-semicondensed-*-*-120-*-*-*-*-iso8859-15" using


@@ -1071,11 +1264,25 @@ escape sequence.
 If user is running a grml live-CD, dont ask for any password, if she
 wants a root shell.
 
 If user is running a grml live-CD, dont ask for any password, if she
 wants a root shell.
 

+: **term2iso** (//echo 'Setting terminal to iso mode' ; print -n '\e%@'//)
+Sets mode from UTF-8 to ISO 2022 (See:
+http://www.cl.cam.ac.uk/~mgk25/unicode.html#term).
+
+: **term2utf** (//echo 'Setting terminal to utf-8 mode'; print -n '\e%G'//)
+Sets mode from ISO 2022 to UTF-8 (See:
+http://www.cl.cam.ac.uk/~mgk25/unicode.html#term).
+

 : **tiny** (//echo -en [ escape sequence ]//)
 Sets tiny xterm font
 ("-misc-fixed-medium-r-normal-*-*-80-*-*-c-*-iso8859-15") using escape
 sequence.
 
 : **tiny** (//echo -en [ escape sequence ]//)
 Sets tiny xterm font
 ("-misc-fixed-medium-r-normal-*-*-80-*-*-c-*-iso8859-15") using escape
 sequence.
 

+: **tlog** (//tail -f /var/log/syslog//)
+Prints syslog continuously (See tail(1)).
+
+: **top10** (//print -l ? ${(o)history%% *} | uniq -c | sort -nr | head -n 10//)
+Prints the ten most used shell commands.
+

 : **truec** (//truecrypt [ mount options ]//)
 Mount a truecrypt volume with some reasonable mount options
 ("rw,sync,dirsync,users,uid=1000,gid=users,umask=077" and "utf8", if
 : **truec** (//truecrypt [ mount options ]//)
 Mount a truecrypt volume with some reasonable mount options
 ("rw,sync,dirsync,users,uid=1000,gid=users,umask=077" and "utf8", if


@@ -1085,6 +1292,19 @@ available).
 Performs a system update followed by a system upgrade using aptitude; run
 by sudo, if necessary. See au and ag above.
 
 Performs a system update followed by a system upgrade using aptitude; run
 by sudo, if necessary. See au and ag above.
 

+: **url-quote** (//autoload -U url-quote-magic ; zle -N self-insert url-quote-magic//)
+After calling, characters of URLs as typed get automatically escaped, if necessary, to
+protect them from the shell.
+
+: **0** (//return 0//)
+Gives a clean prompt (i.e. without $?).
+
+: **$(uname -r)-reboot** (//kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)"//)
+Reboots using kexec(8) and thus reduces boot time by skipping hardware initialization of BIOS/firmware.
+
+: **...** (//cd ../..///)
+Changes current directory two levels higher.
+

 : **?** (//qma zshall//)
 Runs the grml script qma (quick manual access) to build the collected man
 pages for the z-shell. This compressed file is kept at
 : **?** (//qma zshall//)
 Runs the grml script qma (quick manual access) to build the collected man
 pages for the z-shell. This compressed file is kept at


@@ -1279,7 +1499,7 @@ Beckert <abe@deuxchevaux.org>.
 
 
 = COPYRIGHT =
 
 
 = COPYRIGHT =

-Copyright (c) 2009, grml project <http://grml.org>
+Copyright (c) 2009-2010 grml project <http://grml.org>

 
 This manpage is distributed under the terms of the GPL version 2.
 
 
 This manpage is distributed under the terms of the GPL version 2.