zshrc: Remove the root/non-root split

[grml-etc-core.git] / doc / grmlzshrc.t2t

diff --git a/doc/grmlzshrc.t2t b/doc/grmlzshrc.t2t
index 98ad496..3aae18f 100644 (file)
--- a/doc/grmlzshrc.t2t
+++ b/doc/grmlzshrc.t2t
@@ -56,9 +56,6 @@ put the battery status into the right hand side interactive prompt.
 A non zero value activates a handler, which is called when a command can not
 be found. The handler is defined by GRML_ZSH_CNF_HANDLER (see below).
 
 A non zero value activates a handler, which is called when a command can not
 be found. The handler is defined by GRML_ZSH_CNF_HANDLER (see below).
 

-: **GRML_ALWAYS_LOAD_ALL**
-Enables the whole Grml setup for root, if set to a non zero value.
-

 : **GRML_ZSH_CNF_HANDLER**
 This variable contains the handler to be used by COMMAND_NOT_FOUND (see above)
 and defaults to "/usr/share/command-not-found/command-not-found".
 : **GRML_ZSH_CNF_HANDLER**
 This variable contains the handler to be used by COMMAND_NOT_FOUND (see above)
 and defaults to "/usr/share/command-not-found/command-not-found".


@@ -317,10 +314,6 @@ already set otherwise.
 : **PAGER**
 Set less(1) as default pager, if not already set to something different.
 
 : **PAGER**
 Set less(1) as default pager, if not already set to something different.
 

-: **QTDIR**
-Holds the path to shared files for the C++ application framework QT
-(version 3 or 4).
-

 : **SHELL**
 Set explicitly to /bin/zsh, to prevent certain terminal emulators to
 default to /bin/sh or /bin/bash.
 : **SHELL**
 Set explicitly to /bin/zsh, to prevent certain terminal emulators to
 default to /bin/sh or /bin/bash.


@@ -386,11 +379,6 @@ A wildcard character never matches a leading '.'.
 : **nohup** <grml>
 Do not send the hangup signal (HUP:1) to running jobs when the shell exits.
 
 : **nohup** <grml>
 Do not send the hangup signal (HUP:1) to running jobs when the shell exits.
 

-: **nonomatch** <grml>
-If a pattern for filename generation has no matches, do not print an error
-and leave it unchanged in the argument list. This also applies to file
-expansion of an initial `~' or `='.
-

 : **notify**
 Report the status of background jobs immediately, rather than waiting until
 just before printing a prompt.
 : **notify**
 Report the status of background jobs immediately, rather than waiting until
 just before printing a prompt.


@@ -590,17 +578,10 @@ Example usages:
 Runs a command in $SHELL with profiling enabled (See startup variable
 ZSH_PROFILE_RC above).
 
 Runs a command in $SHELL with profiling enabled (See startup variable
 ZSH_PROFILE_RC above).
 

-: **refunc()**
-Reloads functions given as parameters.
-

 : **salias()**
 Creates an alias whith sudo prepended, if $EUID is not zero. Run "salias -h"
 for details. See also xunfunction() below.
 
 : **salias()**
 Creates an alias whith sudo prepended, if $EUID is not zero. Run "salias -h"
 for details. See also xunfunction() below.
 

-: **show-archive()**
-Lists the contents of a (compressed) archive with the appropriate programs.
-The choice is made along the filename extension.
-

 : **simple-extract()**
 Tries to uncompress/unpack given files with the appropriate programs. If an URI
 starting with https, http or ftp is provided simple-extract tries to download
 : **simple-extract()**
 Tries to uncompress/unpack given files with the appropriate programs. If an URI
 starting with https, http or ftp is provided simple-extract tries to download


@@ -611,11 +592,6 @@ ending. simple-extract will not delete the original archive (even on .gz,.bz2 or
 : **sll()**
 Prints details of symlinks given as arguments.
 
 : **sll()**
 Prints details of symlinks given as arguments.
 

-: **smartcompress()**
-Compresses/archives the file given as first parameter. Takes an optional
-second argument, which denotes the compression/archive type as typical
-filename extension; defaults to "tar.gz".
-

 : **ssl-cert-fingerprints**
 Prints the SHA512, SHA256, SHA1 and MD5 digest of a x509 certificate.
 First and only parameter must be a file containing a certificate. Use
 : **ssl-cert-fingerprints**
 Prints the SHA512, SHA256, SHA1 and MD5 digest of a x509 certificate.
 First and only parameter must be a file containing a certificate. Use


@@ -748,12 +724,6 @@ available packages are fetched from the location(s) specified in
 /etc/apt/sources.list. An update should always be performed before an
 upgrade or dist-upgrade; run by sudo, if necessary.
 
 /etc/apt/sources.list. An update should always be performed before an
 upgrade or dist-upgrade; run by sudo, if necessary.
 

-: **CH** (//./configure --help//)
-Lists available compilation options for building program from source.
-
-: **CO** (//./configure//)
-Prepares compilation for building program from source.
-

 : **da** (//du -sch//)
 Prints the summarized disk usage of the arguments as well as a grand total
 in human readable format.
 : **da** (//du -sch//)
 Prints the summarized disk usage of the arguments as well as a grand total
 in human readable format.


@@ -768,9 +738,6 @@ Prints installed Packages sorted by size (descending).
 Lists files (including dot files) sorted by size (biggest last) in long and
 human readable output format.
 
 Lists files (including dot files) sorted by size (biggest last) in long and
 human readable output format.
 

-: **g** (//git//)
-Revision control system by Linus Torvalds.
-

 : **ge** (//grep-excuses//)
 Searches the testing excuses files for a specific maintainer (See:
 grep-excuses(1)).
 : **ge** (//grep-excuses//)
 Searches the testing excuses files for a specific maintainer (See:
 grep-excuses(1)).


@@ -876,9 +843,6 @@ about them.
 : **mq** (//hg -R $(readlink -f $(hg root)/.hg/patches)//)
 Executes the commands on the versioned patch queue from current repository.
 
 : **mq** (//hg -R $(readlink -f $(hg root)/.hg/patches)//)
 Executes the commands on the versioned patch queue from current repository.
 

-: **rd** (//rmdir//)
-Short rmdir(1) (remove directory).
-

 : **rmcdir** (//'cd ..; rmdir $OLDPWD || cd $OLDPWD//)
 rmdir current working directory
 
 : **rmcdir** (//'cd ..; rmdir $OLDPWD || cd $OLDPWD//)
 rmdir current working directory
 


@@ -888,12 +852,6 @@ as config file. If invoked by a regular user, start a screen session
 with users .screenrc config if it exists, else use /etc/grml/screenrc_grml
 as configuration.
 
 with users .screenrc config if it exists, else use /etc/grml/screenrc_grml
 as configuration.
 

-: **S** (//screen//)
-Short for screen(1).
-
-: **s** (//ssh//)
-Short for ssh(1).
-

 : **su** (//sudo su//)
 If user is running a grml live-CD, dont ask for any password, if she
 wants a root shell.
 : **su** (//sudo su//)
 If user is running a grml live-CD, dont ask for any password, if she
 wants a root shell.


@@ -909,14 +867,6 @@ http://www.cl.cam.ac.uk/~mgk25/unicode.html#term).
 : **tlog** (//tail -f /var/log/syslog//)
 Prints syslog continuously (See tail(1)).
 
 : **tlog** (//tail -f /var/log/syslog//)
 Prints syslog continuously (See tail(1)).
 

-: **top10** (//print -l ? ${(o)history%% *} | uniq -c | sort -nr | head -n 10//)
-Prints the ten most used shell commands.
-
-: **truec** (//truecrypt [ mount options ]//)
-Mount a truecrypt volume with some reasonable mount options
-("rw,sync,dirsync,users,uid=1000,gid=users,umask=077" and "utf8", if
-available).
-

 : **up** (//aptitude update ; aptitude safe-upgrade//)
 Performs a system update followed by a system upgrade using aptitude; run
 by sudo, if necessary. See au and ag above.
 : **up** (//aptitude update ; aptitude safe-upgrade//)
 Performs a system update followed by a system upgrade using aptitude; run
 by sudo, if necessary. See au and ag above.


@@ -925,9 +875,6 @@ by sudo, if necessary. See au and ag above.
 After calling, characters of URLs as typed get automatically escaped, if necessary, to
 protect them from the shell.
 
 After calling, characters of URLs as typed get automatically escaped, if necessary, to
 protect them from the shell.
 

-: **0** (//return 0//)
-Gives a clean prompt (i.e. without $?).
-

 : **$(uname -r)-reboot** (//kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)"//)
 Reboots using kexec(8) and thus reduces boot time by skipping hardware initialization of BIOS/firmware.
 
 : **$(uname -r)-reboot** (//kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)"//)
 Reboots using kexec(8) and thus reduces boot time by skipping hardware initialization of BIOS/firmware.