zshrc: Remove doc()

[grml-etc-core.git] / doc / grmlzshrc.t2t

diff --git a/doc/grmlzshrc.t2t b/doc/grmlzshrc.t2t
index 1398a7a..a045a1e 100644 (file)
--- a/doc/grmlzshrc.t2t
+++ b/doc/grmlzshrc.t2t
@@ -1,13 +1,13 @@
 GRMLZSHRC
 
 GRMLZSHRC
 

-June, 2010
+July, 2011

 
 %!target: man
 %!postproc(man): "^(\.TH.*) 1 "  "\1 5 "
 
 
 = NAME =
 
 %!target: man
 %!postproc(man): "^(\.TH.*) 1 "  "\1 5 "
 
 
 = NAME =

-grmlzshrc - grml's zsh setup
+grmlzshrc - Grml's zsh setup

 
 
 = SYNOPSIS =
 
 
 = SYNOPSIS =


@@ -15,7 +15,7 @@ grmlzshrc - grml's zsh setup
 
 
 = DESCRIPTION =
 
 
 = DESCRIPTION =

-The grml project provides a fairly exhaustive interactive setup (referred to
+The Grml project provides a fairly exhaustive interactive setup (referred to

 as //grmlzshrc// throughout this document) for the amazing unix shell zsh
 (http://zsh.sourceforge.net). This is the reference manual for that
 setup.
 as //grmlzshrc// throughout this document) for the amazing unix shell zsh
 (http://zsh.sourceforge.net). This is the reference manual for that
 setup.


@@ -28,6 +28,18 @@ root user (**EUID** == 0) only a subset of features is loaded by default. This
 behaviour can be altered by setting the **GRML_ALWAYS_LOAD_ALL** STARTUP
 VARIABLE (see below).
 
 behaviour can be altered by setting the **GRML_ALWAYS_LOAD_ALL** STARTUP
 VARIABLE (see below).
 

+Users may want to keep an up-to-date version of the setup (possibly from the
+git-sources) in //~/.zshrc//. If that happens on a system where the global
+zshrc is also a //grmlzshrc// (but possibly an older one), you can inhibit
+loading the global version by doing:
+\
+```
+echo setopt no_global_rcs >> ~/.zshenv
+```
+
+Note, that this will disable //ANY// global files, except for the global
+zshenv file.
+

 = STARTUP VARIABLES =
 Some of the behaviour of //grmlzshrc// can be altered by setting certain shell
 variables. These may be set temporarily when starting zsh like this:
 = STARTUP VARIABLES =
 Some of the behaviour of //grmlzshrc// can be altered by setting certain shell
 variables. These may be set temporarily when starting zsh like this:


@@ -45,7 +57,7 @@ A non zero value activates a handler, which is called when a command can not
 be found. The handler is defined by GRML_ZSH_CNF_HANDLER (see below).
 
 : **GRML_ALWAYS_LOAD_ALL**
 be found. The handler is defined by GRML_ZSH_CNF_HANDLER (see below).
 
 : **GRML_ALWAYS_LOAD_ALL**

-Enables the whole grml setup for root, if set to a non zero value.
+Enables the whole Grml setup for root, if set to a non zero value.

 
 : **GRML_ZSH_CNF_HANDLER**
 This variable contains the handler to be used by COMMAND_NOT_FOUND (see above)
 
 : **GRML_ZSH_CNF_HANDLER**
 This variable contains the handler to be used by COMMAND_NOT_FOUND (see above)


@@ -59,7 +71,7 @@ grml-small.
 Where zsh saves the history. Default: ${HOME}/.zsh_history.
 
 : **HISTSIZE**
 Where zsh saves the history. Default: ${HOME}/.zsh_history.
 
 : **HISTSIZE**

-Number of commands to be kept in the history. On a grml-CD this defaults to
+Number of commands to be kept in the history. On a Grml-CD this defaults to

 500, on a hard disk installation to 5000.
 
 : **MAILCHECK**
 500, on a hard disk installation to 5000.
 
 : **MAILCHECK**


@@ -82,7 +94,7 @@ Show time (user, system and cpu) used by external commands, if they run longer
 than the defined number of seconds (default: 5).
 
 : **SAVEHIST**
 than the defined number of seconds (default: 5).
 
 : **SAVEHIST**

-Number of commands to be stored in ${HISTFILE}. Defaults to 1000 on a grml-CD
+Number of commands to be stored in ${HISTFILE}. Defaults to 1000 on a Grml-CD

 and to 10000 on an installation on hard disk.
 
 : **watch**
 and to 10000 on an installation on hard disk.
 
 : **watch**


@@ -286,9 +298,6 @@ available via the usual history lookup widgets.
 //grmlzshrc// sets some environment variables, which influence the
 behaviour of applications.
 
 //grmlzshrc// sets some environment variables, which influence the
 behaviour of applications.
 

-: **BROWSER**
-If X is running this is set to "firefox", otherwise to "w3m".
-

 : **COLORTERM**
 Set to "yes". Some applications read this to learn about properties
 of the terminal they are running in.
 : **COLORTERM**
 Set to "yes". Some applications read this to learn about properties
 of the terminal they are running in.


@@ -412,9 +421,18 @@ Deletes a word left of the cursor; seeing '/' as additional word separator.
 : **CTRL-x-1**
 Jump right after the first word.
 
 : **CTRL-x-1**
 Jump right after the first word.
 

+: **CTRL-x-M()**
+Create directory under cursor or the selected area.
+To select an area press ctrl-@ and use the cursor.
+Use case: you type "mv abc ~/testa/testb/testc/" and remember that the
+directory does not exist yet -> press **CTRL-xM** and problem solved.
+

 : **CTRL-x-p**
 Searches the last occurence of string before the cursor in the command history.
 
 : **CTRL-x-p**
 Searches the last occurence of string before the cursor in the command history.
 

+: **CTRL-x-z**
+Display help on keybindings and zsh line editor. Press consecutively to page through content.
+

 : **CTRL-z**
 Brings a job, which got suspended with CTRL-z back to foreground.
 
 : **CTRL-z**
 Brings a job, which got suspended with CTRL-z back to foreground.
 


@@ -423,15 +441,6 @@ Brings a job, which got suspended with CTRL-z back to foreground.
 //grmlzshrc// comes with a wide array of defined shell functions to ease the
 user's life.
 
 //grmlzshrc// comes with a wide array of defined shell functions to ease the
 user's life.
 

-: **2html()**
-Converts plaintext files to HTML using vim. The output is written to
-<filename>.html.
-
-: **2mp3_192()**
-Useful if you own players lacking ogg/flac support.
-Takes a list of "*.ogg" and "*.flac" files and transcodes them to mp3
-with a variable bitrate of at least 192, while preserving basic id3 tags.
-

 : **855resolution()**
 If 915resolution is available, issues a warning to the user to run it instead
 to modify the resolution on intel graphics chipsets.
 : **855resolution()**
 If 915resolution is available, issues a warning to the user to run it instead
 to modify the resolution on intel graphics chipsets.


@@ -441,64 +450,32 @@ Lists files in current directory, which have been accessed within the
 last N days. N is an integer to be passed as first and only argument.
 If no argument is specified N is set to 1.
 
 last N days. N is an integer to be passed as first and only argument.
 If no argument is specified N is set to 1.
 

-: **agoogle()**
-Searches for USENET postings from authors using google groups.
-

 : **allulimit()**
 Sets all ulimit values to "unlimited".
 
 : **allulimit()**
 Sets all ulimit values to "unlimited".
 

-: **ansi-colors()**
-Prints a colored table of available ansi color codes (to be used in escape
-sequences) and the colors they represent.
-

 : **any()**
 Lists processes matching given pattern.
 
 : **any()**
 Lists processes matching given pattern.
 

-: **aoeu(), asdf(), uiae()**
-Pressing the 'asdf' keys toggles between dvorak or neon and us keyboard
-layout.
-
-: **apache2-ssl-certificate()**
-Advices the user how to create self signed certificates.
-

 : **asc()**
 Login on the host provided as argument using autossh. Then reattach a GNU screen
 session if a detached session is around or detach a currently attached screen or
 else start a new screen.  This is especially useful for roadwarriors using GNU
 screen and ssh.
 
 : **asc()**
 Login on the host provided as argument using autossh. Then reattach a GNU screen
 session if a detached session is around or detach a currently attached screen or
 else start a new screen.  This is especially useful for roadwarriors using GNU
 screen and ssh.
 

-: **audioburn()**
-Burns the files in ~/ripps (see audiorip() below) to an audio CD.
-Then prompts the user if she wants to remove that directory. You might need
-to tell audioburn which cdrom device to use like:
-"DEVICE=/dev/cdrom audioburn"
-
-: **audiorip()**
-Creates directory ~/ripps, if it does not exist. Then rips audio CD into
-it. Then prompts the user if she wants to burn a audio CD with audioburn()
-(see above). You might need to tell audiorip which cdrom device to use like:
-"DEVICE=/dev/cdrom audioburn"
-

 : **bk()**
 Simple backup of a file or directory using cp(1). The target file name is the
 original name plus a time stamp attached. Symlinks and file attributes like mode,
 ownership and timestamps are preserved.
 
 : **bk()**
 Simple backup of a file or directory using cp(1). The target file name is the
 original name plus a time stamp attached. Symlinks and file attributes like mode,
 ownership and timestamps are preserved.
 

-: **brltty()**
-The brltty(1) program provides a braille display, so a blind person can access
-the console screen. This wrapper function works around problems with some
-environments (f. e. utf8).
-
-: **cdiff()**
-Runs a recursive diff(1) over two given directories trying to find the
-smallest set of changes. Three lines of context will be printed and binary
-files filtered out.
-

 : **cdrecord()**
 If the original cdrecord is not installed, issues a warning to the user to
 use the wodim binary instead. Wodim is the debian fork of Joerg Schillings
 cdrecord.
 
 : **cdrecord()**
 If the original cdrecord is not installed, issues a warning to the user to
 use the wodim binary instead. Wodim is the debian fork of Joerg Schillings
 cdrecord.
 

+: **cdt()**
+Creates a temporary directory using mktemp. Then changes current
+working directory to it.
+

 : **changed()**
 Lists files in current directory, which have been changed within the
 last N days. N is an integer to be passed as first and only argument.
 : **changed()**
 Lists files in current directory, which have been changed within the
 last N days. N is an integer to be passed as first and only argument.


@@ -517,35 +494,9 @@ grml systems with autologin.
 Changes current directory to the one supplied by argument and lists the files
 in it, including file names starting with ".".
 
 Changes current directory to the one supplied by argument and lists the files
 in it, including file names starting with ".".
 

-: **cvsa()**
-Adds and commits the given files using cvs(1). The commit message will be
-'initial checkin'.
-
-: **cvsd()**
-Shows a cvs diff of the arguments in $PAGER.
-
-: **cvsl()**
-Shows the cvs log in $PAGER.
-
-: **cvsq()**
-Runs a cvs update.
-
-: **cvsr()**
-Generates a changelog using rcs2log and shows it in $PAGER.
-
-: **cvss()**
-Shows cvs status of given files.
-

 : **dchange()**
 Shows the changelog of given package in $PAGER.
 
 : **dchange()**
 Shows the changelog of given package in $PAGER.
 

-: **debbug()**
-Searches the Debian bug tracking system (bugs.debian.org) for Bug numbers,
-email addresses of submitters or any string given on the command line.
-
-: **debbugm()**
-Shows bug report for debian given by number in mailbox format.
-

 : **debian2hd()**
 Tells the user to use grml-debootstrap, if she wants to install debian to
 harddisk.
 : **debian2hd()**
 Tells the user to use grml-debootstrap, if she wants to install debian to
 harddisk.


@@ -555,81 +506,18 @@ A trick from $LINUX-KERNELSOURCE/Documentation/power/swsusp.txt. It brings
 back interactive responsiveness after suspend, when the system is swapping
 heavily.
 
 back interactive responsiveness after suspend, when the system is swapping
 heavily.
 

-: **dirspace()**
-Shows the disk usage of the directories given in human readable format;
-defaults to $path.
-
-: **disassemble()**
-Translates C source code to assembly and ouputs both.
-
-: **dmoz()**
-Searches for the first argument (optional) in the Open Directory Project
-(See http://www.dmoz.org/docs/en/about.html).
-

 : **dnews()**
 Shows the NEWS file for the given package in $PAGER.
 
 : **dnews()**
 Shows the NEWS file for the given package in $PAGER.
 

-: **doc()**
-Takes packagename as argument. Sets current working directory to
-/usr/share/doc/<packagename> and prints out a directory listing.
-
-: **dwicti()**
-Looks up the first argument (optional) in the german Wiktionary
-which is an online dictionary (See: http://de.wiktionary.org/).
-

 : **edalias()**
 Edit given alias.
 
 : **edfunc()**
 Edit given shell function.
 
 : **edalias()**
 Edit given alias.
 
 : **edfunc()**
 Edit given shell function.
 

-: **ewicti()**
-Looks up the first argument (optional in the english Wiktionary
-which is an online dictionary (See: http://en.wiktionary.org/).
-
-: **exirename()**
-Renames image files based on date/time informations in their exif headers.
-
-: **fir()**
-Opens given URL with Firefox (Iceweasel on Debian). If there is already an
-instance of firefox running, attaches to the first window found and opens the
-URL in a new tab (this even works across an ssh session).
-
-: **fluxkey-change()**
-Switches the key combinations for changing current workspace under fluxbox(1)
-from Alt-[0-9] to Alt-F[0-9] and vice versa by rewriting $HOME/.fluxbox/keys.
-Requires the window manager to reread configuration to take effect.
-

 : **freload()**
 Reloads an autoloadable shell function (See autoload in zshbuiltins(1)).
 
 : **freload()**
 Reloads an autoloadable shell function (See autoload in zshbuiltins(1)).
 

-: **genthumbs()**
-A simple thumbnails generator. Resizes images (i. e. files that end in ".jpg",
-".jpeg", ".gif" or ".png") to 100x200. Output files are named "thumb-<original
-filename>". Creates an index.html with title "Images" showing the
-thumbnails as clickable links to the respective original file.
-//Warning:// On start genthumbs() silently removes a possibly existing "index.html"
-and all files and/or directories beginning with "thumb-" in current directory!
-
-: **get_tw_cli()**
-Fetches 3ware RAID controller software using get_3ware(1).
-
-: **gex()**
-Performs an exact (i. e. quoted) web search using Google.
-
-: **ggogle()**
-Searches the arguments on Google Groups, a web to USENET gateway.
-
-: **google()**
-Searches the search engine Google using arguments as search string.
-
-: **greph()**
-Searches the zsh command history for a regular expression.
-
-: **hex()**
-Prints the hexadecimal representation of the number supplied as argument
-(base ten only).
-

 : **hgdi()**
 Use GNU diff with options -ubwd for mercurial.
 
 : **hgdi()**
 Use GNU diff with options -ubwd for mercurial.
 


@@ -640,18 +528,6 @@ argument means last revision).
 : **hidiff()**
 Outputs highlighted diff; needs highstring(1).
 
 : **hidiff()**
 Outputs highlighted diff; needs highstring(1).
 

-: **hl()**
-Shows source files in less(1) with syntax highlighting. Run "hl -h"
-for detailed usage information.
-
-: **ic_get()**
-Queries IMAP server (first parameter) for its capabilities. Takes
-port number as optional second argument.
-
-: **ipv6-tunnel()**
-Sets up an IPv6 tunnel on interface sit1. Needs one argument -
-either "start", "stop" or "status".
-

 : **is4()**
 Returns true, if zsh version is equal or greater than 4, else false.
 
 : **is4()**
 Returns true, if zsh version is equal or greater than 4, else false.
 


@@ -689,79 +565,19 @@ environment variables to UTF-8.
 : **isutfenv()**
 Returns true, if run within an utf environment, else false.
 
 : **isutfenv()**
 Returns true, if run within an utf environment, else false.
 

-: **iwclient()**
-Searches a wireless interface and runs dhclient(8) on it.
-
-: **lcheck()**
-Lists libraries that define the symbol containing the string given as
-parameter.
-
-: **limg()**
-Lists images (i. e. files ending with ".jpg", ".gif" or ".png") in current
-directory.
-
-: **linenr()**
-Prints specified range of (numbered) lines of a file.
-Usage: linenr <start>[,<end>] <file>
-
-: **lsdisk()**
-Uses udev's /dev/disk to list block devices with their LABEL, UUID and IDs.
-
-: **makereadable()**
-Creates a PostScript and a PDF file (basename as first argument) from
-source code files.
-
-: **man2()**
-Displays manpage in a streched style.
-
-: **manzsh()**
-Shows the zshall manpage and jumps to the first match of the regular
-expression optionally given as argument (Needs qma(1)).
-

 : **mcd()**
 Creates directory including parent directories, if necessary. Then changes
 current working directory to it.
 
 : **mcd()**
 Creates directory including parent directories, if necessary. Then changes
 current working directory to it.
 

-: **mdiff()**
-Diffs the two arguments recursively and writes the
-output (unified format) to a timestamped file.
-
-: **memusage()**
-Prints the summarized memory usage in bytes.
-
-: **mggogle()**
-Searches Google Groups for a USENET message-ID.
-

 : **minimal-shell()**
 Spawns a minimally set up MirBSD Korn shell. It references no files in /usr,
 so that file system can be unmounted.
 
 : **minimal-shell()**
 Spawns a minimally set up MirBSD Korn shell. It references no files in /usr,
 so that file system can be unmounted.
 

-: **mkaudiocd()**
-Renames all mp3 files in ~/ripps (see audiorip above) to lowercase and
-replaces spaces in file names with underscores. Then mkaudiocd()
-normalizes the files and recodes them to WAV.
-
-: **mkiso()**
-Creates an iso9660 filesystem image with Rockridge and Joliet extensions
-enabled using mkisofs(8). Prompts the user for volume name, filename and
-target directory.
-
-: **mkmaildir()**
-Creates a directory with first parameter as name inside $MAILDIR_ROOT
-(defaults to $HOME/Mail) and subdirectories cur, new and tmp.
-
-: **mmake()**
-Runs "make install" and logs the output under ~/.errorlogs/; useful for
-a clean deinstall later.
-

 : **modified()**
 Lists files in current directory, which have been modified within the
 last N days. N is an integer to be passed as first and only argument.
 If no argument is specified N is set to 1.
 
 : **modified()**
 Lists files in current directory, which have been modified within the
 last N days. N is an integer to be passed as first and only argument.
 If no argument is specified N is set to 1.
 

-: **netcraft()**
-Asks netcraft.com for informations about the site given as argument.
-

 : **nt()**
 A helper function for the "e" glob qualifier to list all files newer
 than a reference file.
 : **nt()**
 A helper function for the "e" glob qualifier to list all files newer
 than a reference file.


@@ -774,78 +590,36 @@ Example usages:
 % ls -l *(e:'nt /reference/file':)
 ```
 
 % ls -l *(e:'nt /reference/file':)
 ```
 

-: **oleo()**
-Translates the given word using the english - german online
-dictionary dict.leo.org.
-
-: **peval()**
-Evaluates a perl expression; useful as command line
-calculator, therefore also available as "calc".
-
-: **plap()**
-Lists all occurrences of the string given as argument in current $PATH.
-

 : **profile()**
 Runs a command in $SHELL with profiling enabled (See startup variable
 ZSH_PROFILE_RC above).
 
 : **profile()**
 Runs a command in $SHELL with profiling enabled (See startup variable
 ZSH_PROFILE_RC above).
 

-: **purge()**
-Removes typical temporary files (i. e. files like "*~", ".*~", "#*#", "*.o",
-"a.out", "*.core", "*.cmo", "*.cmi" and ".*.swp") from current directory.
-Asks for confirmation.
-
-: **readme()**
-Opens all README-like files in current working directory with the program
-defined in the $PAGER environment variable.
-

 : **refunc()**
 Reloads functions given as parameters.
 
 : **refunc()**
 Reloads functions given as parameters.
 

-: **regcheck()**
-Checks whether a regular expression (first parameter) matches a string
-(second parameter) using perl.
-

 : **salias()**
 Creates an alias whith sudo prepended, if $EUID is not zero. Run "salias -h"
 for details. See also xunfunction() below.
 
 : **salias()**
 Creates an alias whith sudo prepended, if $EUID is not zero. Run "salias -h"
 for details. See also xunfunction() below.
 

-: **selhist()**
-Greps the history for the string provided as parameter and shows the numbered
-findings in default pager. On exit of the pager the user is prompted for a
-number. The shells readline buffer is then filled with the corresponding
-command line.
-
-: **setenv()**
-Reimplementation of the csh(1) builtin setenv.
-

 : **show-archive()**
 Lists the contents of a (compressed) archive with the appropriate programs.
 The choice is made along the filename extension.
 
 : **show-archive()**
 Lists the contents of a (compressed) archive with the appropriate programs.
 The choice is made along the filename extension.
 

-: **shtar()**
-Lists the content of a gzipped tar archive in default pager.
-
-: **shzip()**
-Shows the content of a zip archive in default pager.
-

 : **simple-extract()**
 : **simple-extract()**

-Tries to uncompress/unpack given file with the appropriate programs. The
-choice is made along the filename ending.
+Tries to uncompress/unpack given files with the appropriate programs. If an URI
+starting with https, http or ftp is provided simple-extract tries to download
+and then uncompress/unpack the file. The choice is made along the filename
+ending. simple-extract will not delete the original archive (even on .gz,.bz2 or
+.xz) unless you use the '-d' option.

 
 : **sll()**
 Prints details of symlinks given as arguments.
 
 
 : **sll()**
 Prints details of symlinks given as arguments.
 

-: **slow_print()**
-Prints the arguments slowly by sleeping 0.08 seconds between each character.
-

 : **smartcompress()**
 Compresses/archives the file given as first parameter. Takes an optional
 second argument, which denotes the compression/archive type as typical
 filename extension; defaults to "tar.gz".
 
 : **smartcompress()**
 Compresses/archives the file given as first parameter. Takes an optional
 second argument, which denotes the compression/archive type as typical
 filename extension; defaults to "tar.gz".
 

-: **smart-indent()**
-Indents C source code files given; uses Kernighan & Ritchie style.
-

 : **sshot()**
 Creates directory named shots in user's home directory, if it does not yet
 exist and changes current working directory to it. Then sleeps 5 seconds,
 : **sshot()**
 Creates directory named shots in user's home directory, if it does not yet
 exist and changes current working directory to it. Then sleeps 5 seconds,


@@ -878,75 +652,29 @@ Example usage:
 % Restart ssh
 ```
 
 % Restart ssh
 ```
 

-: **status()**
-Shows some information about current system status.
-
-: **swiki()**
-Searches articles in the german Wikipedia for the term given as argument.
-
-: **swspeak()**
-Sets up software synthesizer by calling swspeak-setup(8). Kernel boot option
-swspeak must be set for this to work.
-

 : **trans()**
 Translates a word from german to english (-D) or vice versa (-E).
 
 : **uchange()**
 Shows upstreams changelog of a given package in $PAGER.
 
 : **trans()**
 Translates a word from german to english (-D) or vice versa (-E).
 
 : **uchange()**
 Shows upstreams changelog of a given package in $PAGER.
 

-: **udiff()**
-Makes a unified diff of the command line arguments trying hard to find a
-smaller set of changes. Descends recursively into subdirectories. Ignores
-hows some information about current status.
-
-: **uopen()**
-Downloads and displays a file using a suitable program for its
-Content-Type.
-

 : **uprint()**
 Works around the "print -l ${(u)foo}"-limitation on zsh older than 4.2.
 
 : **uprint()**
 Works around the "print -l ${(u)foo}"-limitation on zsh older than 4.2.
 

-: **urlencode()**
-Takes a string as its first argument and prints it RFC 2396 URL encoded to
-standard out.
-

 : **utf2iso()**
 Changes every occurrence of the string UTF-8 or utf-8 in environment
 variables to iso885915.
 
 : **utf2iso()**
 Changes every occurrence of the string UTF-8 or utf-8 in environment
 variables to iso885915.
 

-: **viless()**
-Vim as pager.
-

 : **vim()**
 Wrapper for vim(1). It tries to set the title and hands vim the environment
 variable VIM_OPTIONS on the command line. So the user may define command
 line options, she always wants, in her .zshrc.local.
 
 : **vim()**
 Wrapper for vim(1). It tries to set the title and hands vim the environment
 variable VIM_OPTIONS on the command line. So the user may define command
 line options, she always wants, in her .zshrc.local.
 

-: **vman()**
-Use vim(1) as manpage reader.
-

 : **whatwhen()**
 Searches the history for a given pattern and lists the results by date.
 The first argument is the search pattern. The second and third ones are
 optional and denote a search range (default: -100).
 
 : **whatwhen()**
 Searches the history for a given pattern and lists the results by date.
 The first argument is the search pattern. The second and third ones are
 optional and denote a search range (default: -100).
 

-: **weather()**
-Retrieves and prints weather information from "http://weather.noaa.gov".
-The first and only argument is the ICAO code for the desired station.
-For a list of ICAO codes see
-"http://en.wikipedia.org/wiki/List_of_airports_by_ICAO_code".
-
-: **wikide()**
-Looks up the argument on Wikipedia (german).
-
-: **wikien()**
-Looks up the argument on Wikipedia (english).
-
-: **wodeb()**
-Searches the list of official debian packages for the term given as
-first argument. The optional second argument denotes the distribution
-(stable, testing or unstable) and defaults to unstable.
-

 : **xcat()**
 Tries to cat(1) file(s) given as parameter(s). Always returns true.
 See also xunfunction() below.
 : **xcat()**
 Tries to cat(1) file(s) given as parameter(s). Always returns true.
 See also xunfunction() below.


@@ -963,12 +691,6 @@ arguments for details.
 : **xunfunction()**
 Removes the functions salias, xcat, xsource, xunfunction and zrcautoload.
 
 : **xunfunction()**
 Removes the functions salias, xcat, xsource, xunfunction and zrcautoload.
 

-: **zg()**
-Search for patterns in grml's zshrc using perl. zg takes no or exactly one
-option plus a non empty pattern. Run zg without any arguments for a listing
-of available command line switches. For a zshrc not in /etc/zsh, set the
-GRML_ZSHRC environment variable.
-

 : **zrcautoload()**
 Wrapper around the autoload builtin. Loads the definitions of functions
 from the file given as argument. Searches $fpath for the file. See also
 : **zrcautoload()**
 Wrapper around the autoload builtin. Loads the definitions of functions
 from the file given as argument. Searches $fpath for the file. See also


@@ -1037,10 +759,6 @@ available packages are fetched from the location(s) specified in
 /etc/apt/sources.list. An update should always be performed before an
 upgrade or dist-upgrade; run by sudo, if necessary.
 
 /etc/apt/sources.list. An update should always be performed before an
 upgrade or dist-upgrade; run by sudo, if necessary.
 

-: **calc** (//peval//)
-Evaluates a perl expression (see peval() above); useful as a command line
-calculator.
-

 : **CH** (//./configure --help//)
 Lists available compilation options for building program from source.
 
 : **CH** (//./configure --help//)
 Lists available compilation options for building program from source.
 


@@ -1226,6 +944,9 @@ Short rmdir(1) (remove directory).
 : **rm** (//nocorrect rm//)
 rm(1) without spelling correction.
 
 : **rm** (//nocorrect rm//)
 rm(1) without spelling correction.
 

+: **rmcdir** (//'cd ..; rmdir $OLDPWD || cd $OLDPWD//)
+rmdir current working directory
+

 : **screen** (///usr/bin/screen -c ${HOME}/.screenrc//)
 If invoking user is root, starts screen session with /etc/grml/screenrc
 as config file. If invoked by a regular user, start a screen session
 : **screen** (///usr/bin/screen -c ${HOME}/.screenrc//)
 If invoking user is root, starts screen session with /etc/grml/screenrc
 as config file. If invoked by a regular user, start a screen session


@@ -1310,12 +1031,6 @@ Reboots using kexec(8) and thus reduces boot time by skipping hardware initializ
 : **...** (//cd ../..///)
 Changes current directory two levels higher.
 
 : **...** (//cd ../..///)
 Changes current directory two levels higher.
 

-: **?** (//qma zshall//)
-Runs the grml script qma (quick manual access) to build the collected man
-pages for the z-shell. This compressed file is kept at
-~/man/zshall.txt.lzo Once it is built, the second use of the alias '?' is
-fast. See "man qma" for further information.
-

 
 = AUXILIARY FILES =
 This is a set of files, that - if they exist - can be used to customize the
 
 = AUXILIARY FILES =
 This is a set of files, that - if they exist - can be used to customize the


@@ -1504,10 +1219,10 @@ Beckert <abe@deuxchevaux.org>.
 
 
 = COPYRIGHT =
 
 
 = COPYRIGHT =

-Copyright (c) 2009-2010 grml project <http://grml.org>
+Copyright (c) 2009-2011 Grml project <http://grml.org>

 
 This manpage is distributed under the terms of the GPL version 2.
 
 Most parts of grml's zshrc are distributed under the terms of GPL v2, too,
 
 This manpage is distributed under the terms of the GPL version 2.
 
 Most parts of grml's zshrc are distributed under the terms of GPL v2, too,

-except for **accept-line()** and **vcs_info()**, which are distributed under
-the same conditions as zsh itself (which is BSD-like).
+except for **accept-line()** which are distributed under the same conditions
+as zsh itself (which is BSD-like).