zshrc: Add function to toggle colour codes in vcs_info formats

[grml-etc-core.git] / doc / grmlzshrc.t2t

diff --git a/doc/grmlzshrc.t2t b/doc/grmlzshrc.t2t
index 3d50a91..cc7aa65 100644 (file)
--- a/doc/grmlzshrc.t2t
+++ b/doc/grmlzshrc.t2t
@@ -56,9 +56,6 @@ put the battery status into the right hand side interactive prompt.
 A non zero value activates a handler, which is called when a command can not
 be found. The handler is defined by GRML_ZSH_CNF_HANDLER (see below).
 
 A non zero value activates a handler, which is called when a command can not
 be found. The handler is defined by GRML_ZSH_CNF_HANDLER (see below).
 

-: **GRML_ALWAYS_LOAD_ALL**
-Enables the whole Grml setup for root, if set to a non zero value.
-

 : **GRML_ZSH_CNF_HANDLER**
 This variable contains the handler to be used by COMMAND_NOT_FOUND (see above)
 and defaults to "/usr/share/command-not-found/command-not-found".
 : **GRML_ZSH_CNF_HANDLER**
 This variable contains the handler to be used by COMMAND_NOT_FOUND (see above)
 and defaults to "/usr/share/command-not-found/command-not-found".


@@ -108,6 +105,9 @@ Import "/etc/default/locale", if set to zero (default).
 A non zero value causes shell functions to be profiled. The results can be
 obtained with the zprof builtin command (see zshmodules(1) for details).
 
 A non zero value causes shell functions to be profiled. The results can be
 obtained with the zprof builtin command (see zshmodules(1) for details).
 

+: **COMPDUMPFILE**
+Specifies the location of the completion dump file. Default: $HOME/.zcompdump.
+

 
 = FEATURE DESCRIPTION =
 This is an in depth description of non-standard features implemented by
 
 = FEATURE DESCRIPTION =
 This is an in depth description of non-standard features implemented by


@@ -124,83 +124,117 @@ zshs inherit the dirstack of the zsh that most recently updated
 **DIRSTACKFILE**.
 
 == DIRECTORY BASED PROFILES ==
 **DIRSTACKFILE**.
 
 == DIRECTORY BASED PROFILES ==

-If you want certain settings to be active in certain directories (and
-automatically switch back and forth between them), this is what you want.
+
+If you need to perform certain actions each time you enter certain
+directory-trees, this is the feature you are looking for.
+
+
+=== Initialisation ===
+To initialise the system, you need to call the function `chpwd_profiles' at
+some point in your `zshrc.local'; preferably **after** you configured the
+system. The configuration of the system is described further below.
+
+If you need to do initialisations the first time `chpwd_profiles' is called
+(which should be in your configuration file), you can do that in a function
+called "chpwd_profiles_init". That function needs to be defined **before**
+`chpwd_profiles' is called for this to work.
+
+During the **first** call of `chpwd_profiles' (and therefore all its profile
+functions) the parameter `$CHPWD_PROFILES_INIT' exists and is set to `1'. In
+all other cases, the parameter does not exist at all.
+
+
+=== Styles and Profile-names ===
+To store its configuration, the system uses **functions** and **styles**
+(zsh's context sensitive configuration system), such as this:
+

 \
 ```
 zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)'   profile grml
 zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian
 ```
 
 \
 ```
 zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)'   profile grml
 zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian
 ```
 

-When that's done and you enter a directory that matches the pattern
-in the third part of the context, a function called chpwd_profile_grml,
-for example, is called (if it exists).
+When that's done and you enter a directory that matches the pattern in the
+third part of the context, a function called chpwd_profile_grml, for example,
+is called (if it exists).

 
 

-If no pattern matches (read: no profile is detected) the profile is
-set to 'default', which means chpwd_profile_default is attempted to
-be called.
+If no pattern matches (read: no profile is detected) the profile is set to
+'default', which means chpwd_profile_default is attempted to be called.

 
 

-A word about the context (the ':chpwd:profiles:*' stuff in the zstyle
-command) which is used: The third part in the context is matched against
-**$PWD**. That's why using a pattern such as /foo/bar(|/|/*) makes sense.
-Because that way the profile is detected for all these values of **$PWD**:
+A word about the context (the ':chpwd:profiles:*' stuff in the zstyle command)
+which is used: The third part in the context is matched against ${PWD}. That's
+why using a pattern such as /foo/bar(|/|/*) makes sense. Because that way the
+profile is detected for all these values of ${PWD}:

 \
 ```
 \
 ```

-/foo/bar
-/foo/bar/
-/foo/bar/baz
+  /foo/bar
+  /foo/bar/
+  /foo/bar/baz

 ```
 ```

-
-So, if you want to make double damn sure a profile works in /foo/bar
-and everywhere deeper in that tree, just use (|/|/*) and be happy.
+So, if you want to make double damn sure a profile works in /foo/bar and
+everywhere deeper in that tree, just use (|/|/*) and be happy.

 
 The name of the detected profile will be available in a variable called
 
 The name of the detected profile will be available in a variable called

-'profile' in your functions. You don't need to do anything, it'll just
-be there.
+'profile' in your functions. You don't need to do anything, it'll just be
+there.

 
 

-Then there is the parameter **$CHPWD_PROFILE** which is set to the profile,
-that was active up to now. That way you can avoid running code for a
-profile that is already active, by running code such as the following
-at the start of your function:
+
+=== Controlling Profile Execution ===
+
+During its initialisation run, the system creates a parameter $CHPWD_PROFILE,
+which is set to the profile that was is currently active (the default value is
+"default"). That way you can avoid running code for a profile that is already
+active, by running code such as the following at the start of your function:

 \
 ```
 function chpwd_profile_grml() {
     [[ ${profile} == ${CHPWD_PROFILE} ]] && return 1
 \
 ```
 function chpwd_profile_grml() {
     [[ ${profile} == ${CHPWD_PROFILE} ]] && return 1

-    ...
+  ...

 }
 ```
 
 }
 ```
 

-The initial value for **$CHPWD_PROFILE** is 'default'.
+If you know you are going to do that all the time for each and every
+directory-profile function you are ever going to write, you may also set the
+`re-execute' style to `false' (which only defaults to `true' for backwards
+compatibility), like this:
+\
+```
+  zstyle ':chpwd:profiles:*' re-execute false
+```
+

 
 === Signaling availabily/profile changes ===
 
 
 === Signaling availabily/profile changes ===
 

-If you use this feature and need to know whether it is active in your
-current shell, there are several ways to do that. Here are two simple
-ways:
+If you use this feature and need to know whether it is active in your current
+shell, there are several ways to do that. Here are two simple ways:

 
 

-a) If knowing if the profiles feature is active when zsh starts is
-   good enough for you, you can put the following snippet into your
-   //.zshrc.local//:
-\
-```
-(( ${+functions[chpwd_profiles]} )) &&
-    print "directory profiles active"
-```
+a) If knowing if the profiles feature is active when zsh starts is good
+enough for you, you can use the following snippet:
+
+(( ${+functions[chpwd_profiles]} )) && print "directory profiles active"
+
+b) If that is not good enough, and you would prefer to be notified whenever a
+profile changes, you can solve that by making sure you start **every**
+profile function you create like this:

 
 

-b) If that is not good enough, and you would prefer to be notified
-   whenever a profile changes, you can solve that by making sure you
-   start **every** profile function you create like this:
-\
-```

 function chpwd_profile_myprofilename() {
     [[ ${profile} == ${CHPWD_PROFILE} ]] && return 1
     print "chpwd(): Switching to profile: $profile"
   ...
 }
 function chpwd_profile_myprofilename() {
     [[ ${profile} == ${CHPWD_PROFILE} ]] && return 1
     print "chpwd(): Switching to profile: $profile"
   ...
 }

-```

 
 

-That makes sure you only get notified if a profile is **changed**,
-not everytime you change directory.
+That makes sure you only get notified if a profile is **changed**, not
+everytime you change directory. (To avoid this, you may also set the newer
+`re-execute' style like described further above instead of the test on top of
+the function.
+
+
+=== Leaving Profiles ===
+
+When the system switches from one profile to another, it executes a function
+named "chpwd_leave_profile_<PREVIOUS-PROFILE-NAME>()" before calling the
+profile-function for the new profile.
+

 
 === Version requirement ===
 This feature requires zsh //4.3.3// or newer.
 
 === Version requirement ===
 This feature requires zsh //4.3.3// or newer.


@@ -279,6 +313,53 @@ style. (The default is **true** in all contexts.)
 
 == PROMPT ==
 
 
 == PROMPT ==
 

+The //grmlzshrc// now supplies three prompt themes compatible with zsh's
+**promptinit** system. The three themes are called **grml**, **grml-large** and
+**grml-chroot**.
+
+By default, **grml** is used, unless //$GRMLPROMPT// is set to a value larger
+than zero, in which case **grml-large** is used. Lastly, if //$GRML_CHROOT// is
+non-empty, **grml-chroot** is used.
+
+As usual, with promtinit themes, the user may switch to a different theme using
+the //prompt// utility:
+\
+```
+    prompt grml-large
+```
+
+That will use the **grml-large** prompt theme.
+
+The themes are highly customisable. The main source of documentation about
+customisation is the main **grml** theme's doc-string, that is available via
+the following command:
+\
+```
+    prompt -h grml
+```
+
+The other themes also come with doc-strings, but the main theme's is the
+canonical reference about all of them.
+
+This feature requires version //4.3.7// of the shell. Older versions will use
+the classic grml prompt as a fallback.
+
+A note to people who like customisation: If you are **not** using a prompt
+theme for your customisation, but you're either statically setting $PS1 (or
+$PROMPT) or you're constructing one of those variables in zsh's \`precmd()'
+function, make sure you are turning the zsh's prompt theme system **off**
+before doing so. A correct example customisation could look like this:
+\
+```
+    # Turn the prompt system off:
+    prompt off
+    # Customise the prompt yourself:
+    PS1='%~ %# '
+```
+
+You also add your own tokens by using the \`grml_theme_add_token()' function.
+Call the function without arguments for detailed documentation about that
+procedure.

 
 == GNU/SCREEN STATUS SETTING ==
 //grmlzshrc// sets screen's hardstatus lines to the currently running command
 
 == GNU/SCREEN STATUS SETTING ==
 //grmlzshrc// sets screen's hardstatus lines to the currently running command


@@ -317,10 +398,6 @@ already set otherwise.
 : **PAGER**
 Set less(1) as default pager, if not already set to something different.
 
 : **PAGER**
 Set less(1) as default pager, if not already set to something different.
 

-: **QTDIR**
-Holds the path to shared files for the C++ application framework QT
-(version 3 or 4).
-

 : **SHELL**
 Set explicitly to /bin/zsh, to prevent certain terminal emulators to
 default to /bin/sh or /bin/bash.
 : **SHELL**
 Set explicitly to /bin/zsh, to prevent certain terminal emulators to
 default to /bin/sh or /bin/bash.


@@ -437,6 +514,23 @@ Display help on keybindings and zsh line editor. Press consecutively to page thr
 Brings a job, which got suspended with CTRL-z back to foreground.
 
 
 Brings a job, which got suspended with CTRL-z back to foreground.
 
 

+=== Customisation ===
+
+To customise keybindings, you can just use zsh's bindkey utility. However, if
+you plan to to use the `//zle-line-init//' or `//zle-line-finish//' hooks
+yourself, make sure you call the following functions in the respective hook:
+
+- **zle-line-init**: //zle-smkx//
+- **zle-line-finish**: //zle-rmkx//
+
+
+This is **required** so the keybindings set up by //grmlzshrc// work. The
+reason for this is to turn the terminal into the right mode while zsh's line
+editor (zle) is running. This enables us to query //terminfo// about escape
+sequences for special keys and thus simplify and generalise our keybinding
+section.
+
+

 == SHELL FUNCTIONS ==
 //grmlzshrc// comes with a wide array of defined shell functions to ease the
 user's life.
 == SHELL FUNCTIONS ==
 //grmlzshrc// comes with a wide array of defined shell functions to ease the
 user's life.


@@ -456,13 +550,6 @@ Sets all ulimit values to "unlimited".
 : **any()**
 Lists processes matching given pattern.
 
 : **any()**
 Lists processes matching given pattern.
 

-: **aoeu(), asdf(), uiae()**
-Pressing the 'asdf' keys toggles between dvorak or neon and us keyboard
-layout.
-
-: **apache2-ssl-certificate()**
-Advices the user how to create self signed certificates.
-

 : **asc()**
 Login on the host provided as argument using autossh. Then reattach a GNU screen
 session if a detached session is around or detach a currently attached screen or
 : **asc()**
 Login on the host provided as argument using autossh. Then reattach a GNU screen
 session if a detached session is around or detach a currently attached screen or


@@ -504,6 +591,9 @@ in it, including file names starting with ".".
 : **dchange()**
 Shows the changelog of given package in $PAGER.
 
 : **dchange()**
 Shows the changelog of given package in $PAGER.
 

+: **dcopyright()**
+Shows the copyright of given package in $PAGER.
+

 : **debian2hd()**
 Tells the user to use grml-debootstrap, if she wants to install debian to
 harddisk.
 : **debian2hd()**
 Tells the user to use grml-debootstrap, if she wants to install debian to
 harddisk.


@@ -516,11 +606,6 @@ heavily.
 : **dnews()**
 Shows the NEWS file for the given package in $PAGER.
 
 : **dnews()**
 Shows the NEWS file for the given package in $PAGER.
 

-: **doc()**
-Takes packagename as argument. Sets current working directory to
-/usr/share/doc/<packagename> and prints out a directory listing.
-
-

 : **edalias()**
 Edit given alias.
 
 : **edalias()**
 Edit given alias.
 


@@ -530,12 +615,14 @@ Edit given shell function.
 : **freload()**
 Reloads an autoloadable shell function (See autoload in zshbuiltins(1)).
 
 : **freload()**
 Reloads an autoloadable shell function (See autoload in zshbuiltins(1)).
 

-: **get_tw_cli()**
-Fetches 3ware RAID controller software using get_3ware(1).
-
-: **hex()**
-Prints the hexadecimal representation of the number supplied as argument
-(base ten only).
+: **grml_vcs_info_toggle_colour()**
+Toggles between coloured and uncoloured formats in vcs_info configuration.
+This is useful with prompts that break if colour codes are in vcs_info
+format expansions (like the `clint' prompt and every other prompt that
+uses %v to expand the contents of `$vcs_into_msg_0_'). If you are using
+customised vcs_info formats, you shouldn't be using this function, since
+it will set all formats to grml's default values (either coloured or plain)
+again.

 
 : **hgdi()**
 Use GNU diff with options -ubwd for mercurial.
 
 : **hgdi()**
 Use GNU diff with options -ubwd for mercurial.


@@ -547,10 +634,6 @@ argument means last revision).
 : **hidiff()**
 Outputs highlighted diff; needs highstring(1).
 
 : **hidiff()**
 Outputs highlighted diff; needs highstring(1).
 

-: **ipv6-tunnel()**
-Sets up an IPv6 tunnel on interface sit1. Needs one argument -
-either "start", "stop" or "status".
-

 : **is4()**
 Returns true, if zsh version is equal or greater than 4, else false.
 
 : **is4()**
 Returns true, if zsh version is equal or greater than 4, else false.
 


@@ -588,21 +671,10 @@ environment variables to UTF-8.
 : **isutfenv()**
 Returns true, if run within an utf environment, else false.
 
 : **isutfenv()**
 Returns true, if run within an utf environment, else false.
 

-: **iwclient()**
-Searches a wireless interface and runs dhclient(8) on it.
-
-: **manzsh()**
-Shows the zshall manpage and jumps to the first match of the regular
-expression optionally given as argument (Needs qma(1)).
-
-: **mcd()**
+: **mkcd()**

 Creates directory including parent directories, if necessary. Then changes
 current working directory to it.
 
 Creates directory including parent directories, if necessary. Then changes
 current working directory to it.
 

-: **minimal-shell()**
-Spawns a minimally set up MirBSD Korn shell. It references no files in /usr,
-so that file system can be unmounted.
-

 : **modified()**
 Lists files in current directory, which have been modified within the
 last N days. N is an integer to be passed as first and only argument.
 : **modified()**
 Lists files in current directory, which have been modified within the
 last N days. N is an integer to be passed as first and only argument.


@@ -620,28 +692,14 @@ Example usages:
 % ls -l *(e:'nt /reference/file':)
 ```
 
 % ls -l *(e:'nt /reference/file':)
 ```
 

-: **peval()**
-Evaluates a perl expression; useful as command line
-calculator, therefore also available as "calc".
-

 : **profile()**
 Runs a command in $SHELL with profiling enabled (See startup variable
 ZSH_PROFILE_RC above).
 
 : **profile()**
 Runs a command in $SHELL with profiling enabled (See startup variable
 ZSH_PROFILE_RC above).
 

-: **refunc()**
-Reloads functions given as parameters.
-

 : **salias()**
 Creates an alias whith sudo prepended, if $EUID is not zero. Run "salias -h"
 for details. See also xunfunction() below.
 
 : **salias()**
 Creates an alias whith sudo prepended, if $EUID is not zero. Run "salias -h"
 for details. See also xunfunction() below.
 

-: **setenv()**
-Reimplementation of the csh(1) builtin setenv.
-
-: **show-archive()**
-Lists the contents of a (compressed) archive with the appropriate programs.
-The choice is made along the filename extension.
-

 : **simple-extract()**
 Tries to uncompress/unpack given files with the appropriate programs. If an URI
 starting with https, http or ftp is provided simple-extract tries to download
 : **simple-extract()**
 Tries to uncompress/unpack given files with the appropriate programs. If an URI
 starting with https, http or ftp is provided simple-extract tries to download


@@ -652,18 +710,6 @@ ending. simple-extract will not delete the original archive (even on .gz,.bz2 or
 : **sll()**
 Prints details of symlinks given as arguments.
 
 : **sll()**
 Prints details of symlinks given as arguments.
 

-: **smartcompress()**
-Compresses/archives the file given as first parameter. Takes an optional
-second argument, which denotes the compression/archive type as typical
-filename extension; defaults to "tar.gz".
-
-: **sshot()**
-Creates directory named shots in user's home directory, if it does not yet
-exist and changes current working directory to it. Then sleeps 5 seconds,
-so you have plenty of time to switch desktops/windows. Then makes a screenshot
-of the current desktop. The result is stored in ~/shots to a timestamped
-jpg file.
-

 : **ssl-cert-fingerprints**
 Prints the SHA512, SHA256, SHA1 and MD5 digest of a x509 certificate.
 First and only parameter must be a file containing a certificate. Use
 : **ssl-cert-fingerprints**
 Prints the SHA512, SHA256, SHA1 and MD5 digest of a x509 certificate.
 First and only parameter must be a file containing a certificate. Use


@@ -728,12 +774,6 @@ arguments for details.
 : **xunfunction()**
 Removes the functions salias, xcat, xsource, xunfunction and zrcautoload.
 
 : **xunfunction()**
 Removes the functions salias, xcat, xsource, xunfunction and zrcautoload.
 

-: **zg()**
-Search for patterns in grml's zshrc using perl. zg takes no or exactly one
-option plus a non empty pattern. Run zg without any arguments for a listing
-of available command line switches. For a zshrc not in /etc/zsh, set the
-GRML_ZSHRC environment variable.
-

 : **zrcautoload()**
 Wrapper around the autoload builtin. Loads the definitions of functions
 from the file given as argument. Searches $fpath for the file. See also
 : **zrcautoload()**
 Wrapper around the autoload builtin. Loads the definitions of functions
 from the file given as argument. Searches $fpath for the file. See also


@@ -802,24 +842,6 @@ available packages are fetched from the location(s) specified in
 /etc/apt/sources.list. An update should always be performed before an
 upgrade or dist-upgrade; run by sudo, if necessary.
 
 /etc/apt/sources.list. An update should always be performed before an
 upgrade or dist-upgrade; run by sudo, if necessary.
 

-: **calc** (//peval//)
-Evaluates a perl expression (see peval() above); useful as a command line
-calculator.
-
-: **CH** (//./configure --help//)
-Lists available compilation options for building program from source.
-
-: **cmplayer** (//mplayer -vo fbdev//)
-Video player with framebuffer as video output device, so you can watch
-videos on a virtual tty. Hint: Using fbdev2 allows you to use the shell
-while watching a movie.
-
-: **CO** (//./configure//)
-Prepares compilation for building program from source.
-
-: **cp** (//nocorrect cp//)
-cp(1) without spelling correction.
-

 : **da** (//du -sch//)
 Prints the summarized disk usage of the arguments as well as a grand total
 in human readable format.
 : **da** (//du -sch//)
 Prints the summarized disk usage of the arguments as well as a grand total
 in human readable format.


@@ -830,25 +852,10 @@ Builds binary or source packages from sources (See: dpkg-buildpackage(1)).
 : **debs-by-size** (//grep-status -FStatus -sInstalled-Size,Package -n "install ok installed" | paste -sd "  \n" | sort -rn//)
 Prints installed Packages sorted by size (descending).
 
 : **debs-by-size** (//grep-status -FStatus -sInstalled-Size,Package -n "install ok installed" | paste -sd "  \n" | sort -rn//)
 Prints installed Packages sorted by size (descending).
 

-: **default** (//echo -en [ escape sequence ]//)
-Sets font of xterm to "-misc-fixed-medium-r-normal-*-*-140-*-*-c-*-iso8859-15"
-using escape sequence.
-

 : **dir** (//ls -lSrah//)
 Lists files (including dot files) sorted by size (biggest last) in long and
 human readable output format.
 
 : **dir** (//ls -lSrah//)
 Lists files (including dot files) sorted by size (biggest last) in long and
 human readable output format.
 

-: **fblinks** (//links2 -driver fb//)
-A Web browser on the framebuffer device. So you can browse images and click
-links on the virtual tty.
-
-: **fbmplayer** (//mplayer -vo fbdev -fs -zoom//)
-Fullscreen Video player with the framebuffer as video output device. So you
-can watch videos on a virtual tty.
-
-: **g** (//git//)
-Revision control system by Linus Torvalds.
-

 : **ge** (//grep-excuses//)
 Searches the testing excuses files for a specific maintainer (See:
 grep-excuses(1)).
 : **ge** (//grep-excuses//)
 Searches the testing excuses files for a specific maintainer (See:
 grep-excuses(1)).


@@ -856,12 +863,6 @@ grep-excuses(1)).
 : **grep** (//grep --color=auto//)
 Shows grep output in nice colors, if available.
 
 : **grep** (//grep --color=auto//)
 Shows grep output in nice colors, if available.
 

-: **GREP** (//grep -i --color=auto//)
-Case insensitive grep with colored output.
-
-: **grml-rebuildfstab** (//rebuildfstab -v -r -config//)
-Scans for new devices and updates /etc/fstab according to the findings.
-

 : **grml-version** (//cat /etc/grml_version//)
 Prints version of running grml.
 
 : **grml-version** (//cat /etc/grml_version//)
 Prints version of running grml.
 


@@ -884,16 +885,6 @@ ssh with possible man-in-the-middle attack enabled
 : **help-zshglob** (//H-Glob()//)
 Runs the function H-Glob() to expand or explain wildcards.
 
 : **help-zshglob** (//H-Glob()//)
 Runs the function H-Glob() to expand or explain wildcards.
 

-: **hide** (//echo -en [ escape sequence ]//)
-Tries to hide xterm window using escape sequence.
-
-: **hidiff** (//histring -fE '^Comparing files .*|^diff .*' | histring -c yellow -fE '^\-.*' | histring -c green -fE '^\+.*'//)
-If histring(1) is installed, highlight important stuff in diff(1) output.
-
-: **huge** (//echo -en [ escape sequence ]//)
-Sets huge font in xterm ("-misc-fixed-medium-r-normal-*-*-210-*-*-c-*-iso8859-15")
-using escape sequence.
-

 : **j** (//jobs -l//)
 Prints status of jobs in the current shell session in long format.
 
 : **j** (//jobs -l//)
 Prints status of jobs in the current shell session in long format.
 


@@ -908,10 +899,6 @@ starting with ".".
 : **lad** (//ls -d .*(/)//)
 Lists the dot directories (not their contents) in current directory.
 
 : **lad** (//ls -d .*(/)//)
 Lists the dot directories (not their contents) in current directory.
 

-: **large** (//echo -en [ escape sequence ]//)
-Sets large font in xterm ("-misc-fixed-medium-r-normal-*-*-150-*-*-c-*-iso8859-15")
-using escape sequence.
-

 : **lh** (//ls -hAl --color=auto//)
 Lists files in long and human readable output format in nice colors,
 if available. Includes file names starting with "." except "." and
 : **lh** (//ls -hAl --color=auto//)
 Lists files in long and human readable output format in nice colors,
 if available. Includes file names starting with "." except "." and


@@ -923,11 +910,10 @@ Lists files in long colored output format.
 : **llog** (//$PAGER /var/log/syslog//)
 Opens syslog in pager.
 
 : **llog** (//$PAGER /var/log/syslog//)
 Opens syslog in pager.
 

-: **ls** (//ls -b -CF --color=auto//)
-Lists directory printing octal escapes for nongraphic characters.
-Entries are listed by columns and an indicator for file type is appended
-to each file name. Additionally the output is colored, if the terminal
-supports it.
+: **ls** (//ls -CF --color=auto//)
+Lists directory, entries are listed by columns and an indicator for
+file type is appended to each file name. Additionally the output is
+colored, if the terminal supports it.

 
 : **lsa** (//ls -a .*(.)//)
 Lists dot files in current working directory.
 
 : **lsa** (//ls -a .*(.)//)
 Lists dot files in current working directory.


@@ -947,9 +933,15 @@ Lists symbolic links in current directory.
 : **lsnew** (//ls -rl *(D.om[1,10])//)
 Displays the ten newest files (long output format).
 
 : **lsnew** (//ls -rl *(D.om[1,10])//)
 Displays the ten newest files (long output format).
 

+: **lsnewdir** (//ls -rthdl *(/om[1,10]) .*(D/om[1,10])//)
+Displays the ten newest directories and ten newest .directories.
+

 : **lsold** (//ls -rtlh *(D.om[1,10])//)
 Displays the ten oldest files (long output format).
 
 : **lsold** (//ls -rtlh *(D.om[1,10])//)
 Displays the ten oldest files (long output format).
 

+: **lsolddir** (//ls -rthdl *(/Om[1,10]) .*(D/Om[1,10])//)
+Displays the ten oldest directories and ten oldest .directories.
+

 : **lss** (//ls -l *(s,S,t)//)
 Lists files in current directory that have the setuid, setgid or sticky bit
 set.
 : **lss** (//ls -l *(s,S,t)//)
 Lists files in current directory that have the setuid, setgid or sticky bit
 set.


@@ -964,33 +956,13 @@ world executable (long output format).
 : **lsx** (//ls -l *(*)//)
 Lists only executable files.
 
 : **lsx** (//ls -l *(*)//)
 Lists only executable files.
 

-: **md** (//mkdir -p//)
-Creates directory including parent directories, if necessary
-

 : **mdstat** (//cat /proc/mdstat//)
 Lists all active md (i.e. linux software raid) devices with some information
 about them.
 
 : **mdstat** (//cat /proc/mdstat//)
 Lists all active md (i.e. linux software raid) devices with some information
 about them.
 

-: **medium** (//echo -en [ escape sequence ]//)
-Sets medium sized font
-("-misc-fixed-medium-r-normal--13-120-75-75-c-80-iso8859-15") in xterm
-using escape sequence.
-
-: **mkdir** (//nocorrect mkdir//)
-mkdir(1) without spelling correction.
-

 : **mq** (//hg -R $(readlink -f $(hg root)/.hg/patches)//)
 Executes the commands on the versioned patch queue from current repository.
 
 : **mq** (//hg -R $(readlink -f $(hg root)/.hg/patches)//)
 Executes the commands on the versioned patch queue from current repository.
 

-: **mv** (//nocorrect mv//)
-mv(1) without spelling correction.
-
-: **rd** (//rmdir//)
-Short rmdir(1) (remove directory).
-
-: **rm** (//nocorrect rm//)
-rm(1) without spelling correction.
-

 : **rmcdir** (//'cd ..; rmdir $OLDPWD || cd $OLDPWD//)
 rmdir current working directory
 
 : **rmcdir** (//'cd ..; rmdir $OLDPWD || cd $OLDPWD//)
 rmdir current working directory
 


@@ -1000,39 +972,6 @@ as config file. If invoked by a regular user, start a screen session
 with users .screenrc config if it exists, else use /etc/grml/screenrc_grml
 as configuration.
 
 with users .screenrc config if it exists, else use /etc/grml/screenrc_grml
 as configuration.
 

-: **rw-** (//chmod 600//)
-Grants read and write permission of a file to the owner and nobody else.
-
-: **rwx** (//chmod 700//)
-Grants read, write and execute permission of a file to the owner and nobody
-else.
-
-: **r--** (//chmod 644//)
-Grants read and write permission of a file to the owner and read-only to
-anybody else.
-
-: **r-x** (//chmod 755//)
-Grants read, write and execute permission of a file to the owner and
-read-only plus execute permission to anybody else.
-
-: **S** (//screen//)
-Short for screen(1).
-
-: **s** (//ssh//)
-Short for ssh(1).
-
-: **semifont** (//echo -en [ escape sequence ]//)
-Sets font of xterm to
-"-misc-fixed-medium-r-semicondensed-*-*-120-*-*-*-*-iso8859-15" using
-escape sequence.
-
-: **small** (//echo -en [ escape sequence ]//)
-Sets small xterm font ("6x10") using escape sequence.
-
-: **smartfont** (//echo -en [ escape sequence ]//)
-Sets font of xterm to "-artwiz-smoothansi-*-*-*-*-*-*-*-*-*-*-*-*" using
-escape sequence.
-

 : **su** (//sudo su//)
 If user is running a grml live-CD, dont ask for any password, if she
 wants a root shell.
 : **su** (//sudo su//)
 If user is running a grml live-CD, dont ask for any password, if she
 wants a root shell.


@@ -1045,22 +984,9 @@ http://www.cl.cam.ac.uk/~mgk25/unicode.html#term).
 Sets mode from ISO 2022 to UTF-8 (See:
 http://www.cl.cam.ac.uk/~mgk25/unicode.html#term).
 
 Sets mode from ISO 2022 to UTF-8 (See:
 http://www.cl.cam.ac.uk/~mgk25/unicode.html#term).
 

-: **tiny** (//echo -en [ escape sequence ]//)
-Sets tiny xterm font
-("-misc-fixed-medium-r-normal-*-*-80-*-*-c-*-iso8859-15") using escape
-sequence.
-

 : **tlog** (//tail -f /var/log/syslog//)
 Prints syslog continuously (See tail(1)).
 
 : **tlog** (//tail -f /var/log/syslog//)
 Prints syslog continuously (See tail(1)).
 

-: **top10** (//print -l ? ${(o)history%% *} | uniq -c | sort -nr | head -n 10//)
-Prints the ten most used shell commands.
-
-: **truec** (//truecrypt [ mount options ]//)
-Mount a truecrypt volume with some reasonable mount options
-("rw,sync,dirsync,users,uid=1000,gid=users,umask=077" and "utf8", if
-available).
-

 : **up** (//aptitude update ; aptitude safe-upgrade//)
 Performs a system update followed by a system upgrade using aptitude; run
 by sudo, if necessary. See au and ag above.
 : **up** (//aptitude update ; aptitude safe-upgrade//)
 Performs a system update followed by a system upgrade using aptitude; run
 by sudo, if necessary. See au and ag above.


@@ -1069,21 +995,12 @@ by sudo, if necessary. See au and ag above.
 After calling, characters of URLs as typed get automatically escaped, if necessary, to
 protect them from the shell.
 
 After calling, characters of URLs as typed get automatically escaped, if necessary, to
 protect them from the shell.
 

-: **0** (//return 0//)
-Gives a clean prompt (i.e. without $?).
-

 : **$(uname -r)-reboot** (//kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)"//)
 Reboots using kexec(8) and thus reduces boot time by skipping hardware initialization of BIOS/firmware.
 
 : **...** (//cd ../..///)
 Changes current directory two levels higher.
 
 : **$(uname -r)-reboot** (//kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)"//)
 Reboots using kexec(8) and thus reduces boot time by skipping hardware initialization of BIOS/firmware.
 
 : **...** (//cd ../..///)
 Changes current directory two levels higher.
 

-: **?** (//qma zshall//)
-Runs the grml script qma (quick manual access) to build the collected man
-pages for the z-shell. This compressed file is kept at
-~/man/zshall.txt.lzo Once it is built, the second use of the alias '?' is
-fast. See "man qma" for further information.
-

 
 = AUXILIARY FILES =
 This is a set of files, that - if they exist - can be used to customize the
 
 = AUXILIARY FILES =
 This is a set of files, that - if they exist - can be used to customize the


@@ -1272,7 +1189,7 @@ Beckert <abe@deuxchevaux.org>.
 
 
 = COPYRIGHT =
 
 
 = COPYRIGHT =

-Copyright (c) 2009-2011 Grml project <http://grml.org>
+Copyright (c) 2009-2013 Grml project <http://grml.org>

 
 This manpage is distributed under the terms of the GPL version 2.
 
 
 This manpage is distributed under the terms of the GPL version 2.