-# Filename: zshrc
+# Filename: /etc/zsh/zshrc
# Purpose: config file for zsh (z shell)
# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
# Bug-Reports: see http://grml.org/bugs/
# License: This file is licensed under the GPL v2.
-# Latest change: Sam Mär 17 20:12:26 CET 2007 [mika]
################################################################################
# This file is sourced only for interactive shells. It
# should contain commands to set up aliases, functions,
# Global Order: zshenv, zprofile, zshrc, zlogin
################################################################################
-# zsh profiling {{{
+# USAGE
+# If you are using this file as your ~/.zshrc file, please use ~/.zshrc.pre
+# and ~/.zshrc.local for your own customisations. The former file is read
+# before ~/.zshrc, the latter is read after it. Also, consider reading the
+# refcard and the reference manual for this setup, both available from:
+# <http://grml.org/zsh/>
+
+# Contributing:
+# If you want to help to improve grml's zsh setup, clone the grml-etc-core
+# repository from git.grml.org:
+# git clone git://git.grml.org/grml-etc-core.git
+#
+# Make your changes, commit them; use 'git format-patch' to create a series
+# of patches and send those to the following address via 'git send-email':
+# grml-etc-core@grml.org
+#
+# Doing so makes sure the right people get your patches for review and
+# possibly inclusion.
+
+# zsh-refcard-tag documentation:
+# You may notice strange looking comments in this file.
+# These are there for a purpose. grml's zsh-refcard can now be
+# automatically generated from the contents of the actual configuration
+# file. However, we need a little extra information on which comments
+# and what lines of code to take into account (and for what purpose).
+#
+# Here is what they mean:
+#
+# List of tags (comment types) used:
+# #a# Next line contains an important alias, that should
+# be included in the grml-zsh-refcard.
+# (placement tag: @@INSERT-aliases@@)
+# #f# Next line contains the beginning of an important function.
+# (placement tag: @@INSERT-functions@@)
+# #v# Next line contains an important variable.
+# (placement tag: @@INSERT-variables@@)
+# #k# Next line contains an important keybinding.
+# (placement tag: @@INSERT-keybindings@@)
+# #d# Hashed directories list generation:
+# start denotes the start of a list of 'hash -d'
+# definitions.
+# end denotes its end.
+# (placement tag: @@INSERT-hasheddirs@@)
+# #A# Abbreviation expansion list generation:
+# start denotes the beginning of abbreviations.
+# end denotes their end.
+# Lines within this section that end in '#d .*' provide
+# extra documentation to be included in the refcard.
+# (placement tag: @@INSERT-abbrev@@)
+# #m# This tag allows you to manually generate refcard entries
+# for code lines that are hard/impossible to parse.
+# Example:
+# #m# k ESC-h Call the run-help function
+# That would add a refcard entry in the keybindings table
+# for 'ESC-h' with the given comment.
+# So the syntax is: #m# <section> <argument> <comment>
+# #o# This tag lets you insert entries to the 'other' hash.
+# Generally, this should not be used. It is there for
+# things that cannot be done easily in another way.
+# (placement tag: @@INSERT-other-foobar@@)
+#
+# All of these tags (except for m and o) take two arguments, the first
+# within the tag, the other after the tag:
+#
+# #<tag><section># <comment>
+#
+# Where <section> is really just a number, which are defined by the
+# @secmap array on top of 'genrefcard.pl'. The reason for numbers
+# instead of names is, that for the reader, the tag should not differ
+# much from a regular comment. For zsh, it is a regular comment indeed.
+# The numbers have got the following meanings:
+# 0 -> "default"
+# 1 -> "system"
+# 2 -> "user"
+# 3 -> "debian"
+# 4 -> "search"
+# 5 -> "shortcuts"
+# 6 -> "services"
+#
+# So, the following will add an entry to the 'functions' table in the
+# 'system' section, with a (hopefully) descriptive comment:
+# #f1# Edit an alias via zle
+# edalias() {
+#
+# It will then show up in the @@INSERT-aliases-system@@ replacement tag
+# that can be found in 'grml-zsh-refcard.tex.in'.
+# If the section number is omitted, the 'default' section is assumed.
+# Furthermore, in 'grml-zsh-refcard.tex.in' @@INSERT-aliases@@ is
+# exactly the same as @@INSERT-aliases-default@@. If you want a list of
+# *all* aliases, for example, use @@INSERT-aliases-all@@.
+
+# zsh profiling
# just execute 'ZSH_PROFILE_RC=1 zsh' and run 'zprof' to get the details
- if [[ -n $ZSH_PROFILE_RC ]] ; then
- zmodload zsh/zprof
- fi
-# }}}
+if [[ $ZSH_PROFILE_RC -gt 0 ]] ; then
+ zmodload zsh/zprof
+fi
+
+# load .zshrc.pre to give the user the chance to overwrite the defaults
+[[ -r ${HOME}/.zshrc.pre ]] && source ${HOME}/.zshrc.pre
-# {{{ check for version/system
+# check for version/system
# check for versions (compatibility reasons)
- if autoload is-at-least && is-at-least 2>/dev/null ; then
- is4() { is-at-least 4 }
- is42() { is-at-least 4.2 }
- else
- is4(){
- [[ $ZSH_VERSION == 4.* ]] && return 0
- return 1
- }
- is42(){
- [[ $ZSH_VERSION == 4.<2->* ]] && return 0
- return 1
- }
- fi
+is4(){
+ [[ $ZSH_VERSION == <4->* ]] && return 0
+ return 1
+}
+
+is41(){
+ [[ $ZSH_VERSION == 4.<1->* || $ZSH_VERSION == <5->* ]] && return 0
+ return 1
+}
+
+is42(){
+ [[ $ZSH_VERSION == 4.<2->* || $ZSH_VERSION == <5->* ]] && return 0
+ return 1
+}
+
+is425(){
+ [[ $ZSH_VERSION == 4.2.<5->* || $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0
+ return 1
+}
+
+is43(){
+ [[ $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0
+ return 1
+}
-# grml specific stuff
- isgrml(){
- [ -f /etc/grml_version ] && return 0
+is433(){
+ [[ $ZSH_VERSION == 4.3.<3->* || $ZSH_VERSION == 4.<4->* || $ZSH_VERSION == <5->* ]] && return 0
return 1
- }
+}
+
+is439(){
+ [[ $ZSH_VERSION == 4.3.<9->* || $ZSH_VERSION == 4.<4->* || $ZSH_VERSION == <5->* ]] && return 0
+ return 1
+}
- isgrmlcd(){
- [ -f /etc/grml_cd ] && return 0
+#f1# Checks whether or not you're running grml
+isgrml(){
+ [[ -f /etc/grml_version ]] && return 0
return 1
- }
+}
+
+#f1# Checks whether or not you're running a grml cd
+isgrmlcd(){
+ [[ -f /etc/grml_cd ]] && return 0
+ return 1
+}
- if isgrml ; then
+if isgrml ; then
+#f1# Checks whether or not you're running grml-small
isgrmlsmall() {
- [[ ${${${(f)"$(</etc/grml_version)"}%% *}##*-} == 'small' ]] && return 0 ; return 1
- }
- else
+ [[ ${${${(f)"$(</etc/grml_version)"}%% *}##*-} == 'small' ]] && return 0 ; return 1
+ }
+else
isgrmlsmall() { return 1 }
- fi
+fi
- # are we running within an utf environment?
- isutfenv() {
+isdarwin(){
+ [[ $OSTYPE == darwin* ]] && return 0
+ return 1
+}
+
+#f1# are we running within an utf environment?
+isutfenv() {
case "$LANG $CHARSET $LANGUAGE" in
- *utf*) return 0 ;;
- *UTF*) return 0 ;;
- *) return 1 ;;
+ *utf*) return 0 ;;
+ *UTF*) return 0 ;;
+ *) return 1 ;;
esac
- }
+}
# check for user, if not running as root set $SUDO to sudo
- (( EUID != 0 )) && SUDO='sudo' || SUDO=''
+(( EUID != 0 )) && SUDO='sudo' || SUDO=''
# change directory to home on first invocation of zsh
# important for rungetty -> autologin
# Thanks go to Bart Schaefer!
- isgrml && checkhome() {
- if [[ -z "$ALREADY_DID_CD_HOME" ]]; then
- export ALREADY_DID_CD_HOME=$HOME
- cd
- fi
- }
-# }}}
+isgrml && checkhome() {
+ if [[ -z "$ALREADY_DID_CD_HOME" ]] ; then
+ export ALREADY_DID_CD_HOME=$HOME
+ cd
+ fi
+}
-# {{{ set some variables
- export EDITOR=${EDITOR:-vim}
- export MAIL=${MAIL:-/var/mail/$USER}
- # if we don't set $SHELL then aterm, rxvt,.. will use /bin/sh or /bin/bash :-/
- export SHELL='/bin/zsh'
- [[ -f ~/.terminfo/m/mostlike ]] && MYLESS='LESS=C TERMINFO=~/.terminfo TERM=mostlike less' || MYLESS='less'
- [[ -x /usr/bin/dircolors ]] && eval `dircolors -b`
+# check for zsh v3.1.7+
+
+if ! [[ ${ZSH_VERSION} == 3.1.<7->* \
+ || ${ZSH_VERSION} == 3.<2->.<->* \
+ || ${ZSH_VERSION} == <4->.<->* ]] ; then
+
+ printf '-!-\n'
+ printf '-!- In this configuration we try to make use of features, that only\n'
+ printf '-!- require version 3.1.7 of the shell; That way this setup can be\n'
+ printf '-!- used with a wide range of zsh versions, while using fairly\n'
+ printf '-!- advanced features in all supported versions.\n'
+ printf '-!-\n'
+ printf '-!- However, you are running zsh version %s.\n' "$ZSH_VERSION"
+ printf '-!-\n'
+ printf '-!- While this *may* work, it might as well fail.\n'
+ printf '-!- Please consider updating to at least version 3.1.7 of zsh.\n'
+ printf '-!-\n'
+ printf '-!- DO NOT EXPECT THIS TO WORK FLAWLESSLY!\n'
+ printf '-!- If it does today, you'\''ve been lucky.\n'
+ printf '-!-\n'
+ printf '-!- Ye been warned!\n'
+ printf '-!-\n'
+
+ function zstyle() { : }
+fi
-# Search path for the cd comman
-# cdpath=(.. ~)
+# autoload wrapper - use this one instead of autoload directly
+# We need to define this function as early as this, because autoloading
+# 'is-at-least()' needs it.
+function zrcautoload() {
+ emulate -L zsh
+ setopt extended_glob
+ local fdir ffile
+ local -i ffound
+
+ ffile=$1
+ (( found = 0 ))
+ for fdir in ${fpath} ; do
+ [[ -e ${fdir}/${ffile} ]] && (( ffound = 1 ))
+ done
+
+ (( ffound == 0 )) && return 1
+ if [[ $ZSH_VERSION == 3.1.<6-> || $ZSH_VERSION == <4->* ]] ; then
+ autoload -U ${ffile} || return 1
+ else
+ autoload ${ffile} || return 1
+ fi
+ return 0
+}
-# Support our own site-functions
- [ -d /etc/zsh/site-functions ] && FPATH=/etc/zsh/site-functions:$FPATH
+# Load is-at-least() for more precise version checks
+# Note that this test will *always* fail, if the is-at-least
+# function could not be marked for autoloading.
+zrcautoload is-at-least || is-at-least() { return 1 }
+
+# set some important options (as early as possible)
+setopt append_history # append history list to the history file (important for multiple parallel zsh sessions!)
+is4 && setopt SHARE_HISTORY # import new commands from the history file also in other zsh-session
+setopt extended_history # save each command's beginning timestamp and the duration to the history file
+is4 && setopt histignorealldups # If a new command line being added to the history
+ # list duplicates an older one, the older command is removed from the list
+setopt histignorespace # remove command lines from the history list when
+ # the first character on the line is a space
+setopt auto_cd # if a command is issued that can't be executed as a normal command,
+ # and the command is the name of a directory, perform the cd command to that directory
+setopt extended_glob # in order to use #, ~ and ^ for filename generation
+ # grep word *~(*.gz|*.bz|*.bz2|*.zip|*.Z) ->
+ # -> searches for word not in compressed files
+ # don't forget to quote '^', '~' and '#'!
+setopt longlistjobs # display PID when suspending processes as well
+setopt notify # report the status of backgrounds jobs immediately
+setopt hash_list_all # Whenever a command completion is attempted, make sure \
+ # the entire command path is hashed first.
+setopt completeinword # not just at the end
+setopt nohup # and don't kill them, either
+setopt auto_pushd # make cd push the old directory onto the directory stack.
+setopt nonomatch # try to avoid the 'zsh: no matches found...'
+setopt nobeep # avoid "beep"ing
+setopt pushd_ignore_dups # don't push the same dir twice.
+setopt noglobdots # * shouldn't match dotfiles. ever.
+setopt noshwordsplit # use zsh style word splitting
+setopt unset # don't error out when unset parameters are used
+
+# setting some default values
+
+NOCOR=${NOCOR:-0}
+NOMENU=${NOMENU:-0}
+NOPRECMD=${NOPRECMD:-0}
+COMMAND_NOT_FOUND=${COMMAND_NOT_FOUND:-0}
+GRML_ZSH_CNF_HANDLER=${GRML_ZSH_CNF_HANDLER:-/usr/share/command-not-found/command-not-found}
+BATTERY=${BATTERY:-0}
+GRMLSMALL_SPECIFIC=${GRMLSMALL_SPECIFIC:-1}
+GRML_ALWAYS_LOAD_ALL=${GRML_ALWAYS_LOAD_ALL:-0}
+ZSH_NO_DEFAULT_LOCALE=${ZSH_NO_DEFAULT_LOCALE:-0}
+
+# utility functions
+# this function checks if a command exists and returns either true
+# or false. This avoids using 'which' and 'whence', which will
+# avoid problems with aliases for which on certain weird systems. :-)
+# Usage: check_com [-c|-g] word
+# -c only checks for external commands
+# -g does the usual tests and also checks for global aliases
+check_com() {
+ emulate -L zsh
+ local -i comonly gatoo
+
+ if [[ $1 == '-c' ]] ; then
+ (( comonly = 1 ))
+ shift
+ elif [[ $1 == '-g' ]] ; then
+ (( gatoo = 1 ))
+ else
+ (( comonly = 0 ))
+ (( gatoo = 0 ))
+ fi
-# automatically remove duplicates from these arrays
- typeset -U path cdpath fpath manpath
-# }}}
-
-# {{{ keybindings
- if [[ "$TERM" != emacs ]]; then
- [[ -z "$terminfo[kdch1]" ]] || bindkey -M emacs "$terminfo[kdch1]" delete-char
- [[ -z "$terminfo[khome]" ]] || bindkey -M emacs "$terminfo[khome]" beginning-of-line
- [[ -z "$terminfo[kend]" ]] || bindkey -M emacs "$terminfo[kend]" end-of-line
- [[ -z "$terminfo[kdch1]" ]] || bindkey -M vicmd "$terminfo[kdch1]" vi-delete-char
- [[ -z "$terminfo[khome]" ]] || bindkey -M vicmd "$terminfo[khome]" vi-beginning-of-line
- [[ -z "$terminfo[kend]" ]] || bindkey -M vicmd "$terminfo[kend]" vi-end-of-line
- [[ -z "$terminfo[cuu1]" ]] || bindkey -M viins "$terminfo[cuu1]" vi-up-line-or-history
- [[ -z "$terminfo[cuf1]" ]] || bindkey -M viins "$terminfo[cuf1]" vi-forward-char
- [[ -z "$terminfo[kcuu1]" ]] || bindkey -M viins "$terminfo[kcuu1]" vi-up-line-or-history
- [[ -z "$terminfo[kcud1]" ]] || bindkey -M viins "$terminfo[kcud1]" vi-down-line-or-history
- [[ -z "$terminfo[kcuf1]" ]] || bindkey -M viins "$terminfo[kcuf1]" vi-forward-char
- [[ -z "$terminfo[kcub1]" ]] || bindkey -M viins "$terminfo[kcub1]" vi-backward-char
- # ncurses stuff:
- [[ "$terminfo[kcuu1]" == "\eO"* ]] && bindkey -M viins "${terminfo[kcuu1]/O/[}" vi-up-line-or-history
- [[ "$terminfo[kcud1]" == "\eO"* ]] && bindkey -M viins "${terminfo[kcud1]/O/[}" vi-down-line-or-history
- [[ "$terminfo[kcuf1]" == "\eO"* ]] && bindkey -M viins "${terminfo[kcuf1]/O/[}" vi-forward-char
- [[ "$terminfo[kcub1]" == "\eO"* ]] && bindkey -M viins "${terminfo[kcub1]/O/[}" vi-backward-char
- [[ "$terminfo[khome]" == "\eO"* ]] && bindkey -M viins "${terminfo[khome]/O/[}" beginning-of-line
- [[ "$terminfo[kend]" == "\eO"* ]] && bindkey -M viins "${terminfo[kend]/O/[}" end-of-line
- [[ "$terminfo[khome]" == "\eO"* ]] && bindkey -M emacs "${terminfo[khome]/O/[}" beginning-of-line
- [[ "$terminfo[kend]" == "\eO"* ]] && bindkey -M emacs "${terminfo[kend]/O/[}" end-of-line
-fi
+ if (( ${#argv} != 1 )) ; then
+ printf 'usage: check_com [-c] <command>\n' >&2
+ return 1
+ fi
-## keybindings (run 'bindkeys' for details, more details via man zshzle)
-# use emacs style per default:
- bindkey -e
-# use vi style:
-# bindkey -v
+ if (( comonly > 0 )) ; then
+ [[ -n ${commands[$1]} ]] && return 0
+ return 1
+ fi
-#if [[ "$TERM" == screen ]]; then
- bindkey '\e[1~' beginning-of-line # home
- bindkey '\e[4~' end-of-line # end
- bindkey "^[[A" up-line-or-search # cursor up
- bindkey "^[[B" down-line-or-search # <ESC>-
- bindkey '^x' history-beginning-search-backward # alternative ways of searching the shell history
-# bindkey -s '^L' "|less\n" # ctrl-L pipes to less
-# bindkey -s '^B' " &\n" # ctrl-B runs it in the background
-# if terminal type is set to 'rxvt':
- bindkey '\e[7~' beginning-of-line # home
- bindkey '\e[8~' end-of-line # end
-#fi
+ if [[ -n ${commands[$1]} ]] \
+ || [[ -n ${functions[$1]} ]] \
+ || [[ -n ${aliases[$1]} ]] \
+ || [[ -n ${reswords[(r)$1]} ]] ; then
-# insert unicode character
-# usage example: 'ctrl-x i' 00A7 'ctrl-x i' will give you an §
-# See for example http://unicode.org/charts/ for unicode characters code
- autoload insert-unicode-char
- zle -N insert-unicode-char
- bindkey '^Xi' insert-unicode-char
-
-# just type 'cd ...' to get 'cd ../..'
-# rationalise-dot() {
-# if [[ $LBUFFER = *.. ]]; then
-# LBUFFER+=/..
-# else
-# LBUFFER+=.
-# fi
-# }
-# zle -N rationalise-dot
-# bindkey . rationalise-dot
-
-# bindkey '\eq' push-line-or-edit
-# }}}
-
-# power completion - abbreviation expansion {{{
-# power completion / abbreviation expansion / buffer expansion
-# see http://zshwiki.org/home/examples/zleiab for details
-# less risky than the global aliases but powerful as well
-# just type the abbreviation key and afterwards ',.' to expand it
- declare -A abk
- setopt extendedglob
- setopt interactivecomments
- abk=(
- # key # value
- 'C' '| wc -l'
- '...' '../..'
- '....' '../../..'
- 'BG' '& exit'
- 'C' '| wc -l'
- 'G' '|& grep --color=auto'
- 'H' '| head'
- 'Hl' ' --help |& less -r'
- 'L' '| less'
- 'LL' '|& less -r'
- 'M' '| most'
- 'N' '&>/dev/null'
- 'R' '| tr A-z N-za-m'
- 'SL' '| sort | less'
- 'S' '| sort -u'
- 'T' '| tail'
- 'V' '|& vim -'
- 'hide' "echo -en '\033]50;nil2\007'"
- 'tiny' 'echo -en "\033]50;-misc-fixed-medium-r-normal-*-*-80-*-*-c-*-iso8859-15\007"'
- 'small' 'echo -en "\033]50;6x10\007"'
- 'medium' 'echo -en "\033]50;-misc-fixed-medium-r-normal--13-120-75-75-c-80-iso8859-15\007"'
- 'default' 'echo -e "\033]50;-misc-fixed-medium-r-normal-*-*-140-*-*-c-*-iso8859-15\007"'
- 'large' 'echo -en "\033]50;-misc-fixed-medium-r-normal-*-*-150-*-*-c-*-iso8859-15\007"'
- 'huge' 'echo -en "\033]50;-misc-fixed-medium-r-normal-*-*-210-*-*-c-*-iso8859-15\007"'
- 'smartfont' 'echo -en "\033]50;-artwiz-smoothansi-*-*-*-*-*-*-*-*-*-*-*-*\007"'
- 'semifont' 'echo -en "\033]50;-misc-fixed-medium-r-semicondensed-*-*-120-*-*-*-*-iso8859-15\007"'
- 'da' 'du -sch'
- 'j' 'jobs -l'
- 'u' 'translate -i'
- 'co' "./configure && make && sudo make install"
- 'CH' "./configure --help"
- 'conkeror' 'firefox -chrome chrome://conkeror/content'
- 'dir' 'ls -lSrah'
- 'lad' $'ls -d .*(/)\n# only show dot-directories'
- 'lsa' $'ls -a .*(.)\n# only show dot-files'
- 'lss' $'ls -l *(s,S,t)\n# only files with setgid/setuid/sticky flag'
- 'lsl' $'ls -l *(@[1,10])\n# only symlinks'
- 'lsx' $'ls -l *(*[1,10])\n# only executables'
- 'lsw' $'ls -ld *(R,W,X.^ND/)\n# world-{readable,writable,executable} files'
- 'lsbig' $'ls -flh *(.OL[1,10])\n# display the biggest files'
- 'lsd' $'ls -d *(/)\n# only show directories'
- 'lse' $'ls -d *(/^F)\n# only show empty directories'
- 'lsnew' $'ls -rl *(D.om[1,10])\n# display the newest files'
- 'lsold' $'ls -rtlh *(D.om[-11,-1])\n # display the oldest files'
- 'lssmall' $'ls -Srl *(.oL[1,10])\n# display the smallest files'
- 'rw-' 'chmod 600'
- '600' 'chmod u+rw-x,g-rwx,o-rwx'
- 'rwx' 'chmod u+rwx'
- '700' 'chmod u+rwx,g-rwx,o-rwx'
- 'r--' 'chmod u+r-wx,g-rwx,o-rwx'
- '644' $'chmod u+rw-x,g+r-wx,o+r-wx\n # 4=r,2=w,1=x'
- '755' 'chmod u+rwx,g+r-w+x,o+r-w+x'
- 'md' 'mkdir -p '
- 'cmplayer' 'mplayer -vo -fs -zoom fbdev'
- 'fbmplayer' 'mplayer -vo -fs -zoom fbdev'
- 'fblinks' 'links2 -driver fb'
- 'insecssh' 'ssh -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
- 'fori' 'for i ({..}) { }'
- 'cx' 'chmod +x'
- 'e' 'print -l'
- 'se' 'setopt interactivecomments'
- 'va' 'valac --vapidir=../vapi/ --pkg=gtk+-2.0 gtktest.vala'
- 'fb2' '=mplayer -vo fbdev -fs -zoom 1>/dev/null -xy 2'
- 'fb3' '=mplayer -vo fbdev -fs -zoom 1>/dev/null -xy 3'
- 'ci' 'centericq'
- 'D' 'export DISPLAY=:0.0'
- 'mp' 'mplayer -vo xv -fs -zoom'
- )
-
- globalias () {
- local MATCH
- matched_chars='[.-|_a-zA-Z0-9]#'
- LBUFFER=${LBUFFER%%(#m)[.-|_a-zA-Z0-9]#}
- LBUFFER+=${abk[$MATCH]:-$MATCH}
- }
-
- zle -N globalias
- bindkey ",." globalias
-# }}}
-
-# {{{ autoloading
- autoload -U zmv # who needs mmv or rename?
- autoload history-search-end
-
- # we don't want to quote/espace URLs on our own...
- if autoload -U url-quote-magic ; then
- zle -N self-insert url-quote-magic
- else
- print 'Notice: no url-quote-magic available :('
- fi
+ return 0
+ fi
- alias run-help >&/dev/null && unalias run-help
- autoload run-help # use via 'esc-h'
+ if (( gatoo > 0 )) && [[ -n ${galiases[$1]} ]] ; then
+ return 0
+ fi
-# completion system
- if autoload -U compinit && compinit 2>/dev/null ; then
- compinit 2>/dev/null || print 'Notice: no compinit available :('
- else
- print 'Notice: no compinit available :('
- function zstyle { }
- function compdef { }
- fi
+ return 1
+}
- is4 && autoload -U zed # use ZLE editor to edit a file or function
+# creates an alias and precedes the command with
+# sudo if $EUID is not zero.
+salias() {
+ emulate -L zsh
+ local only=0 ; local multi=0
+ while [[ $1 == -* ]] ; do
+ case $1 in
+ (-o) only=1 ;;
+ (-a) multi=1 ;;
+ (--) shift ; break ;;
+ (-h)
+ printf 'usage: salias [-h|-o|-a] <alias-expression>\n'
+ printf ' -h shows this help text.\n'
+ printf ' -a replace '\'' ; '\'' sequences with '\'' ; sudo '\''.\n'
+ printf ' be careful using this option.\n'
+ printf ' -o only sets an alias if a preceding sudo would be needed.\n'
+ return 0
+ ;;
+ (*) printf "unkown option: '%s'\n" "$1" ; return 1 ;;
+ esac
+ shift
+ done
+
+ if (( ${#argv} > 1 )) ; then
+ printf 'Too many arguments %s\n' "${#argv}"
+ return 1
+ fi
- is4 && for mod in complist deltochar mathfunc ; do
- zmodload -i zsh/${mod} 2>/dev/null || print "Notice: no ${mod} available :("
- done
+ key="${1%%\=*}" ; val="${1#*\=}"
+ if (( EUID == 0 )) && (( only == 0 )); then
+ alias -- "${key}=${val}"
+ elif (( EUID > 0 )) ; then
+ (( multi > 0 )) && val="${val// ; / ; sudo }"
+ alias -- "${key}=sudo ${val}"
+ fi
-# autoload zsh modules when they are referenced
- is4 && for opt mod in a stat \
- a zpty \
- ap zprof \
- ap mapfile ; do
- zmodload -${opt} zsh/${mod} ${mod}
- done ; unset opt mod
+ return 0
+}
- is4 && autoload -U insert-files && \
- zle -N insert-files && \
- bindkey "^Xf" insert-files # C-x-f
+# a "print -l ${(u)foo}"-workaround for pre-4.2.0 shells
+# usage: uprint foo
+# Where foo is the *name* of the parameter you want printed.
+# Note that foo is no typo; $foo would be wrong here!
+if ! is42 ; then
+ uprint () {
+ emulate -L zsh
+ local -a u
+ local w
+ local parameter=$1
+
+ if [[ -z ${parameter} ]] ; then
+ printf 'usage: uprint <parameter>\n'
+ return 1
+ fi
- bindkey ' ' magic-space # also do history expansion on space
- bindkey '\ei' menu-complete # menu completion via esc-i
+ for w in ${(P)parameter} ; do
+ [[ -z ${(M)u:#$w} ]] && u=( $u $w )
+ done
-# press esc-e for editing command line in $EDITOR or $VISUAL
- is4 && autoload -U edit-command-line && \
- zle -N edit-command-line && \
- bindkey '\ee' edit-command-line
+ builtin print -l $u
+ }
+fi
-# menu selection: pick item but stay in the menu (press esc-return)
- is4 && bindkey -M menuselect '\e^M' accept-and-menu-complete
+# Check if we can read given files and source those we can.
+xsource() {
+ if (( ${#argv} < 1 )) ; then
+ printf 'usage: xsource FILE(s)...\n' >&2
+ return 1
+ fi
-# press "ctrl-e d" to insert the actual date in the form yyyy-mm-dd
- _bkdate() { BUFFER="$BUFFER$(date '+%F')"; CURSOR=$#BUFFER; }
- bindkey '\C-ed' _bkdate
- zle -N _bkdate
+ while (( ${#argv} > 0 )) ; do
+ [[ -r "$1" ]] && source "$1"
+ shift
+ done
+ return 0
+}
-# press esc-m for inserting last typed word again (thanks to caphuso!)
- insert-last-typed-word() { zle insert-last-word -- 0 -1 }; \
- zle -N insert-last-typed-word; bindkey "\em" insert-last-typed-word
-
-# set command prediction from history, see 'man 1 zshcontrib'
-# is4 && autoload -U predict-on && \
-# zle -N predict-on && \
-# zle -N predict-off && \
-# bindkey "^X^Z" predict-on && \
-# bindkey "^Z" predict-off
-
-# put job into foreground via ctrl-z:
- bindkey -s '^z' "fg\n"
-
-# press ctrl-q to quote line:
-# mquote () {
-# zle beginning-of-line
-# zle forward-word
-# # RBUFFER="'$RBUFFER'"
-# RBUFFER=${(q)RBUFFER}
-# zle end-of-line
-# }
-# zle -N mquote && bindkey '^q' mquote
+# Check if we can read a given file and 'cat(1)' it.
+xcat() {
+ emulate -L zsh
+ if (( ${#argv} != 1 )) ; then
+ printf 'usage: xcat FILE\n' >&2
+ return 1
+ fi
-# run command line as user root via sudo:
- _sudo-command-line() {
- [[ $BUFFER != sudo\ * ]] && LBUFFER="sudo $LBUFFER"
- }
- zle -N sudo-command-line _sudo-command-line
- bindkey "^Os" sudo-command-line
-# }}}
-
-# {{{ set some important options
- (( EUID != 0 )) && umask 002 || umask 022
-
-# history:
- setopt append_history # append history list to the history file (important for multiple parallel zsh sessions!)
- is4 && setopt SHARE_HISTORY # import new commands from the history file also in other zsh-session
- setopt extended_history # save each command's beginning timestamp and the duration to the history file
- is4 && setopt histignorealldups # If a new command line being added to the history
- # list duplicates an older one, the older command is removed from the list
- setopt histignorespace # remove command lines from the history list when
- # the first character on the line is a space
-# setopt histallowclobber # add `|' to output redirections in the history
-# setopt NO_clobber # warning if file exists ('cat /dev/null > ~/.zshrc')
- setopt auto_cd # if a command is issued that can't be executed as a normal command,
- # and the command is the name of a directory, perform the cd command to that directory
- setopt extended_glob # in order to use #, ~ and ^ for filename generation
- # grep word *~(*.gz|*.bz|*.bz2|*.zip|*.Z) ->
- # -> searches for word not in compressed files
- # don't forget to quote '^', '~' and '#'!
- setopt notify # report the status of backgrounds jobs immediately
- setopt hash_list_all # Whenever a command completion is attempted, make sure \
- # the entire command path is hashed first.
- setopt completeinword # not just at the end
-# setopt nocheckjobs # don't warn me about bg processes when exiting
- setopt nohup # and don't kill them, either
-# setopt printexitvalue # alert me if something failed
-# setopt dvorak # with spelling correction, assume dvorak kb
- setopt auto_pushd # make cd push the old directory onto the directory stack.
- setopt nonomatch # try to avoid the 'zsh: no matches found...'
- setopt nobeep # avoid "beep"ing
-
- MAILCHECK=30 # mailchecks
- REPORTTIME=5 # report about cpu-/system-/user-time of command if running longer than 5 secondes
- watch=(notme root) # watch for everyone but me and root
-
-# define word separators (for stuff like backward-word, forward-word, backward-kill-word,..)
-# WORDCHARS='*?_-.[]~=/&;!#$%^(){}<>' # the default
-# WORDCHARS=.
-# WORDCHARS='*?_[]~=&;!#$%^(){}'
-# WORDCHARS='${WORDCHARS:s@/@}'
+ [[ -r $1 ]] && cat $1
+ return 0
+}
-# only slash should be considered as a word separator:
- slash-backward-kill-word() {
- local WORDCHARS="${WORDCHARS:s@/@}"
- # zle backward-word
- zle backward-kill-word
- }
- zle -N slash-backward-kill-word
- bindkey '\ev' slash-backward-kill-word # press esc-v to delete a word until its last '/' (not the same as ctrl-w!)
-# }}}
-
-# {{{ history
- export ZSHDIR=$HOME/.zsh
- HISTFILE=$HOME/.zsh_history
- isgrmlcd && HISTSIZE=500 || HISTSIZE=5000
- isgrmlcd && SAVEHIST=1000 || SAVEHIST=10000 # useful for setopt append_history
-# }}}
-
-# dirstack handling {{{
- DIRSTACKSIZE=20
- if [[ -f ~/.zdirs ]] && [[ ${#dirstack[*]} -eq 0 ]]; then
- dirstack=( ${(uf)"$(< ~/.zdirs)"} )
- # "cd -" won't work after login by just setting $OLDPWD, so
- cd $dirstack[0] && cd $OLDPWD
- fi
- chpwd() {
- builtin dirs -pl >! ~/.zdirs
- }
-# }}}
-
-# {{{ display battery status on right side of prompt via running 'BATTERY=1 zsh'
- if [ -n "$BATTERY" ] ; then
- if [ -x $(which acpi) ] ; then
- PERCENT="${(C)${(s| |)$(acpi 2>/dev/null)}[4]}"
- [ -z "$PERCENT" ] && PERCENT='acpi not present'
- if [ "${PERCENT%%%}" -lt 20 ] ; then
- PERCENT="warning: ${PERCENT}%"
- fi
- fi
- fi
-# }}}
+# Remove these functions again, they are of use only in these
+# setup files. This should be called at the end of .zshrc.
+xunfunction() {
+ emulate -L zsh
+ local -a funcs
+ funcs=(salias xcat xsource xunfunction zrcautoload)
+
+ for func in $funcs ; do
+ [[ -n ${functions[$func]} ]] \
+ && unfunction $func
+ done
+ return 0
+}
-# {{{ set prompt
- if autoload promptinit && promptinit 2>/dev/null ; then
- promptinit # people should be able to use their favourite prompt
- else
- print 'Notice: no promptinit available :('
- fi
+# this allows us to stay in sync with grml's zshrc and put own
+# modifications in ~/.zshrc.local
+zrclocal() {
+ xsource "/etc/zsh/zshrc.local"
+ xsource "${HOME}/.zshrc.local"
+ return 0
+}
+
+# locale setup
+if (( ZSH_NO_DEFAULT_LOCALE == 0 )); then
+ xsource "/etc/default/locale"
+fi
-# precmd() => a function which is executed just before each prompt
-# use 'NOPRECMD=1' to disable the precmd + preexec commands
+for var in LANG LC_ALL LC_MESSAGES ; do
+ [[ -n ${(P)var} ]] && export $var
+done
- # precmd () { setopt promptsubst; [[ -o interactive ]] && jobs -l;
+xsource "/etc/sysconfig/keyboard"
- is4 && [[ -z $NOPRECMD ]] && precmd () {
- [[ -n $NOPRECMD ]] && return 0
- # just use DONTSETRPROMPT=1 to be able to overwrite RPROMPT
- if [[ -z ${DONTSETRPROMPT} ]] ; then
- if [ -n "$BATTERY" ] ; then
- # RPROMPT="%(?..:()% ${PERCENT}${SCREENTITLE}"
- RPROMPT="${PERCENT}${SCREENTITLE}"
- else
- # RPROMPT="%(?..:()% ${SCREENTITLE}"
- RPROMPT="${SCREENTITLE}"
- fi
- fi
- # adjust title of xterm
- # see http://www.faqs.org/docs/Linux-mini/Xterm-Title.html
- case $TERM in (xterm*|rxvt)
- print -Pn "\e]0;%n@%m: %~\a"
- ;;
- esac
- }
+TZ=$(xcat /etc/timezone)
-# chpwd () => a function which is executed whenever the directory is changed
+# set some variables
+if check_com -c vim ; then
+#v#
+ export EDITOR=${EDITOR:-vim}
+else
+ export EDITOR=${EDITOR:-vi}
+fi
-# preexec() => a function running before every command
- is4 && [[ -z $NOPRECMD ]] && preexec () {
- [[ -n $NOPRECMD ]] && return 0
- # set hostname if not running on host with name 'grml'
- local HOSTNAME=$(hostname)
- if [[ "$HOSTNAME" != grml ]] ; then
- NAME="@$HOSTNAME"
- fi
- # get the name of the program currently running and hostname of local machine
- # set screen window title if running in a screen
- if [[ "$TERM" == screen* ]]; then
- # local CMD=${1[(wr)^(*=*|sudo|ssh|-*)]} # dont't use hostname
- local CMD="${1[(wr)^(*=*|sudo|ssh|-*)]}$NAME" # use hostname
- echo -ne "\ek$CMD\e\\"
- fi
- # set the screen title to "zsh" when sitting at the command prompt:
- if [[ "$TERM" == screen* ]]; then
- SCREENTITLE=$'%{\ekzsh\e\\%}'
- else
- SCREENTITLE=''
- fi
- # adjust title of xterm
- case $TERM in (xterm*|rxvt)
- print -Pn "\e]0;%n@%m: $1\a"
- ;;
- esac
- }
-
-# set colors
- if autoload colors && colors 2>/dev/null ; then
- BLUE="%{${fg[blue]}%}"
- RED="%{${fg_bold[red]}%}"
- GREEN="%{${fg[green]}%}"
- CYAN="%{${fg[cyan]}%}"
- WHITE="%{${fg[white]}%}"
- NO_COLOUR="%{${reset_color}%}"
- else
- BLUE="%{\e[1;34m%}"
- RED="%{\e[1;31m%}"
- GREEN="%{\e[1;32m%}"
- CYAN="%{\e[1;36m%}"
- WHITE="%{\e[1;37m%}"
- NO_COLOUR="%{\e[0m%}"
- fi
+#v#
+export PAGER=${PAGER:-less}
- EXITCODE="%(?..%?%1v )"
- PS2='`%_> ' # secondary prompt, printed when the shell needs more information to complete a command.
- PS3='?# ' # selection prompt used within a select loop.
- PS4='+%N:%i:%_> ' # the execution trace prompt (setopt xtrace). default: '+%N:%i>'
+#v#
+export MAIL=${MAIL:-/var/mail/$USER}
- # set variable debian_chroot if running in a chroot with /etc/debian_chroot
- if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then
- debian_chroot=$(cat /etc/debian_chroot)
- fi
+# if we don't set $SHELL then aterm, rxvt,.. will use /bin/sh or /bin/bash :-/
+export SHELL='/bin/zsh'
- # don't use colors on dumb terminals (like emacs):
- if [[ "$TERM" == dumb ]] ; then
- PROMPT="${EXITCODE}${debian_chroot:+($debian_chroot)}%n@%m %40<...<%B%~%b%<< %# "
- else
- # only if $GRMLPROMPT is set (e.g. via 'GRMLPROMPT=1 zsh') use the extended prompt
- # set variable identifying the chroot you work in (used in the prompt below)
- if [[ -n "$GRMLPROMPT" ]]; then
- PROMPT="${RED}${EXITCODE}${CYAN}[%j running job(s)] ${GREEN}{history#%!} ${RED}%(3L.+.) ${BLUE}%* %D
-${BLUE}%n${NO_COLOUR}@%m %40<...<%B%~%b%<< %# "
- else
- if (( EUID != 0 )); then
- PROMPT="${RED}${EXITCODE}${WHITE}${debian_chroot:+($debian_chroot)}${BLUE}%n${NO_COLOUR}@%m %40<...<%B%~%b%<< %# " # primary prompt string
- else
- PROMPT="${BLUE}${EXITCODE}${WHITE}${debian_chroot:+($debian_chroot)}${RED}%n${NO_COLOUR}@%m %40<...<%B%~%b%<< %# " # primary prompt string
- fi
+# color setup for ls:
+check_com -c dircolors && eval $(dircolors -b)
+# color setup for ls on OS X:
+isdarwin && export CLICOLOR=1
+
+# do MacPorts setup on darwin
+if isdarwin && [[ -d /opt/local ]]; then
+ # Note: PATH gets set in /etc/zprofile on Darwin, so this can't go into
+ # zshenv.
+ PATH="/opt/local/bin:/opt/local/sbin:$PATH"
+ MANPATH="/opt/local/share/man:$MANPATH"
+fi
+# do Fink setup on darwin
+isdarwin && xsource /sw/bin/init.sh
+
+# load our function and completion directories
+for fdir in /usr/share/grml/zsh/completion /usr/share/grml/zsh/functions; do
+ fpath=( ${fdir} ${fdir}/**/*(/N) ${fpath} )
+ if [[ ${fpath} == '/usr/share/grml/zsh/functions' ]] ; then
+ for func in ${fdir}/**/[^_]*[^~](N.) ; do
+ zrcautoload ${func:t}
+ done
fi
- fi
+done
+unset fdir func
+
+# support colors in less
+export LESS_TERMCAP_mb=$'\E[01;31m'
+export LESS_TERMCAP_md=$'\E[01;31m'
+export LESS_TERMCAP_me=$'\E[0m'
+export LESS_TERMCAP_se=$'\E[0m'
+export LESS_TERMCAP_so=$'\E[01;44;33m'
+export LESS_TERMCAP_ue=$'\E[0m'
+export LESS_TERMCAP_us=$'\E[01;32m'
+
+MAILCHECK=30 # mailchecks
+REPORTTIME=5 # report about cpu-/system-/user-time of command if running longer than 5 seconds
+watch=(notme root) # watch for everyone but me and root
- # if we are inside a grml-chroot set a specific prompt theme
- if [ -n "$GRML_CHROOT" ] ; then
- PROMPT="%{$fg[red]%}(CHROOT) %{$fg_bold[red]%}%n%{$fg_no_bold[white]%}@%m %40<...<%B%~%b%<< %\# "
- fi
-# }}}
-
-# {{{ 'hash' some often used directories
- hash -d deb=/var/cache/apt/archives
- hash -d doc=/usr/share/doc
- hash -d linux=/lib/modules/$(command uname -r)/build/
- hash -d log=/var/log
- hash -d slog=/var/log/syslog
- hash -d src=/usr/src
- hash -d templ=/usr/share/doc/grml-templates
- hash -d tt=/usr/share/doc/texttools-doc
- hash -d www=/var/www
-# }}}
-
-# {{{ some aliases
- if [ $UID = 0 ] ; then
- [ -r /etc/grml/screenrc ] && alias screen='/usr/bin/screen -c /etc/grml/screenrc'
- elif [ -r $HOME/.screenrc ] ; then
- alias screen="/usr/bin/screen -c $HOME/.screenrc"
- else
- [ -r /etc/grml/screenrc_grml ] && alias screen='/usr/bin/screen -c /etc/grml/screenrc_grml'
- fi
+# automatically remove duplicates from these arrays
+typeset -U path cdpath fpath manpath
+
+# keybindings
+if [[ "$TERM" != emacs ]] ; then
+ [[ -z "$terminfo[kdch1]" ]] || bindkey -M emacs "$terminfo[kdch1]" delete-char
+ [[ -z "$terminfo[khome]" ]] || bindkey -M emacs "$terminfo[khome]" beginning-of-line
+ [[ -z "$terminfo[kend]" ]] || bindkey -M emacs "$terminfo[kend]" end-of-line
+ [[ -z "$terminfo[kdch1]" ]] || bindkey -M vicmd "$terminfo[kdch1]" vi-delete-char
+ [[ -z "$terminfo[khome]" ]] || bindkey -M vicmd "$terminfo[khome]" vi-beginning-of-line
+ [[ -z "$terminfo[kend]" ]] || bindkey -M vicmd "$terminfo[kend]" vi-end-of-line
+ [[ -z "$terminfo[cuu1]" ]] || bindkey -M viins "$terminfo[cuu1]" vi-up-line-or-history
+ [[ -z "$terminfo[cuf1]" ]] || bindkey -M viins "$terminfo[cuf1]" vi-forward-char
+ [[ -z "$terminfo[kcuu1]" ]] || bindkey -M viins "$terminfo[kcuu1]" vi-up-line-or-history
+ [[ -z "$terminfo[kcud1]" ]] || bindkey -M viins "$terminfo[kcud1]" vi-down-line-or-history
+ [[ -z "$terminfo[kcuf1]" ]] || bindkey -M viins "$terminfo[kcuf1]" vi-forward-char
+ [[ -z "$terminfo[kcub1]" ]] || bindkey -M viins "$terminfo[kcub1]" vi-backward-char
+ # ncurses stuff:
+ [[ "$terminfo[kcuu1]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kcuu1]/O/[}" vi-up-line-or-history
+ [[ "$terminfo[kcud1]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kcud1]/O/[}" vi-down-line-or-history
+ [[ "$terminfo[kcuf1]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kcuf1]/O/[}" vi-forward-char
+ [[ "$terminfo[kcub1]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kcub1]/O/[}" vi-backward-char
+ [[ "$terminfo[khome]" == $'\eO'* ]] && bindkey -M viins "${terminfo[khome]/O/[}" beginning-of-line
+ [[ "$terminfo[kend]" == $'\eO'* ]] && bindkey -M viins "${terminfo[kend]/O/[}" end-of-line
+ [[ "$terminfo[khome]" == $'\eO'* ]] && bindkey -M emacs "${terminfo[khome]/O/[}" beginning-of-line
+ [[ "$terminfo[kend]" == $'\eO'* ]] && bindkey -M emacs "${terminfo[kend]/O/[}" end-of-line
+fi
- if ls --help 2>/dev/null |grep -- --color= >/dev/null && [ "$TERM" != dumb ] ; then
- alias ls='ls -b -CF --color=auto' # do we have GNU ls with color-support?
- alias la='ls -la --color=auto'
- alias ll='ls -l --color=auto'
- alias lh='ls -hAl --color=auto'
- alias l='ls -lF --color=auto'
- else
- alias ls='ls -b -CF'
- alias la='ls -la'
- alias ll='ls -l'
- alias lh='ls -hAl'
- alias l='ls -lF'
- fi
+## keybindings (run 'bindkeys' for details, more details via man zshzle)
+# use emacs style per default:
+bindkey -e
+# use vi style:
+# bindkey -v
- alias cp='nocorrect cp' # no spelling correction on cp
- alias mkdir='nocorrect mkdir' # no spelling correction on mkdir
- alias mv='nocorrect mv' # no spelling correction on mv
- alias rm='nocorrect rm' # no spelling correction on rm
-
- alias rd='rmdir'
- alias md='mkdir'
-
- # see http://www.cl.cam.ac.uk/~mgk25/unicode.html#term for details
- alias term2iso="echo 'Setting terminal to iso mode' ; echo -e '\e%@'"
- alias term2utf="echo 'Setting terminal to utf-8 mode'; echo -e '\e%G'"
-
- alias utf2iso='if isutfenv ; then
- for ENV in `env | grep UTF` ; do
- eval export "$(echo $ENV | sed 's/UTF-8/iso885915/')"
- done
- fi'
- alias iso2utf='if isutfenv ; then
- for ENV in `env | grep '\.iso'` ; do
- eval export "$(echo $ENV | sed 's/iso.*/UTF-8/')"
- done
- fi'
-
-# set up software synthesizer via speakup
- alias swspeak='
- aumix -w 90 -v 90 -p 90 -m 90
- if ! [ -r /dev/softsynth ] ; then
- flite -o play -t "Sorry, software synthesizer not available. Did you boot with swspeak bootoption?"
- return 1
+## beginning-of-line OR beginning-of-buffer OR beginning of history
+## by: Bart Schaefer <schaefer@brasslantern.com>, Bernhard Tittelbach
+beginning-or-end-of-somewhere() {
+ local hno=$HISTNO
+ if [[ ( "${LBUFFER[-1]}" == $'\n' && "${WIDGET}" == beginning-of* ) || \
+ ( "${RBUFFER[1]}" == $'\n' && "${WIDGET}" == end-of* ) ]]; then
+ zle .${WIDGET:s/somewhere/buffer-or-history/} "$@"
else
- setopt singlelinezle
- unsetopt prompt_cr
- export PS1="%m%# "
- nice -n -20 speechd-up
- flite -o play -t "Finished setting up software synthesizer"
+ zle .${WIDGET:s/somewhere/line-hist/} "$@"
+ if (( HISTNO != hno )); then
+ zle .${WIDGET:s/somewhere/buffer-or-history/} "$@"
+ fi
fi
- '
+}
+zle -N beginning-of-somewhere beginning-or-end-of-somewhere
+zle -N end-of-somewhere beginning-or-end-of-somewhere
+
+
+#if [[ "$TERM" == screen ]] ; then
+
+## with HOME/END, move to beginning/end of line (on multiline) on first keypress
+## to beginning/end of buffer on second keypress
+## and to beginning/end of history on (at most) the third keypress
+# terminator & non-debian xterm
+bindkey '\eOH' beginning-of-somewhere # home
+bindkey '\eOF' end-of-somewhere # end
+# freebsd console
+bindkey '\e[H' beginning-of-somewhere # home
+bindkey '\e[F' end-of-somewhere # end
+# xterm,gnome-terminal,quake,etc
+bindkey '^[[1~' beginning-of-somewhere # home
+bindkey '^[[4~' end-of-somewhere # end
+# if terminal type is set to 'rxvt':
+bindkey '\e[7~' beginning-of-somewhere # home
+bindkey '\e[8~' end-of-somewhere # end
+#fi
- # I like clean prompt, so provide simple way to get that
- alias 0 &>/dev/null || functions 0 &>/dev/null || alias 0='return 0'
+bindkey '\e[A' up-line-or-search # cursor up
+bindkey '\e[B' down-line-or-search # <ESC>-
+
+## alt-backspace is already the default for backwards-delete-word
+## let's also set alt-delete for deleting current word (right of cursor)
+#k# Kill right-side word
+bindkey '^[[3~' delete-word # Modeswitch
+bindkey '^[[3;3~' delete-word # Alt_L
+
+## use Ctrl-left-arrow and Ctrl-right-arrow for jumping to word-beginnings on the CL
+bindkey "\e[5C" forward-word
+bindkey "\e[5D" backward-word
+bindkey "\e[1;5C" forward-word
+bindkey "\e[1;5D" backward-word
+## the same for alt-left-arrow and alt-right-arrow
+bindkey '^[[1;3C' forward-word
+bindkey '^[[1;3D' backward-word
+
+# Search backward in the history for a line beginning with the current
+# line up to the cursor and move the cursor to the end of the line then
+zle -N history-beginning-search-backward-end history-search-end
+zle -N history-beginning-search-forward-end history-search-end
+#k# search history backward for entry beginning with typed text
+bindkey '^xp' history-beginning-search-backward-end
+#k# search history forward for entry beginning with typed text
+bindkey '^xP' history-beginning-search-forward-end
+#k# search history backward for entry beginning with typed text
+bindkey "\e[5~" history-beginning-search-backward-end # PageUp
+#k# search history forward for entry beginning with typed text
+bindkey "\e[6~" history-beginning-search-forward-end # PageDown
-# truecrypt; use e.g. via 'truec /dev/ice /mnt/ice' or 'truec -i'
- if [ -x /usr/sbin/truecrypt ] ; then
- if isutfenv ; then
- alias truec='truecrypt --mount-options "rw,sync,dirsync,users,uid=1000,gid=users,umask=077,utf8" '
- else
- alias truec='truecrypt --mount-options "rw,sync,dirsync,users,uid=1000,gid=users,umask=077" '
- fi
- fi
+# bindkey -s '^L' "|less\n" # ctrl-L pipes to less
+# bindkey -s '^B' " &\n" # ctrl-B runs it in the background
- zsh-help(){print "$bg[white]$fg[black]
-zsh-help - hints for use of zsh on grml
-=======================================$reset_color
+# insert unicode character
+# usage example: 'ctrl-x i' 00A7 'ctrl-x i' will give you an §
+# See for example http://unicode.org/charts/ for unicode characters code
+zrcautoload insert-unicode-char
+zle -N insert-unicode-char
+#k# Insert Unicode character
+bindkey '^Xi' insert-unicode-char
+
+#m# k Shift-tab Perform backwards menu completion
+if [[ -n "$terminfo[kcbt]" ]]; then
+ bindkey "$terminfo[kcbt]" reverse-menu-complete
+elif [[ -n "$terminfo[cbt]" ]]; then # required for GNU screen
+ bindkey "$terminfo[cbt]" reverse-menu-complete
+fi
-Main configuration of zsh happens in /etc/zsh/zshrc (global)
-and /etc/skel/.zshrc which is copied to \$HOME/.zshrc once.
-The files are part of the package grml-etc-core, if you want to
-use them on a non-grml-system just get the tar.gz from
-http://deb.grml.org/ or get the files from the mercurial
-repository:
+## toggle the ,. abbreviation feature on/off
+# NOABBREVIATION: default abbreviation-state
+# 0 - enabled (default)
+# 1 - disabled
+NOABBREVIATION=${NOABBREVIATION:-0}
- http://hg.grml.org/grml-etc-core/raw-file/tip/etc/skel/.zshrc
- http://hg.grml.org/grml-etc-core/raw-file/tip/etc/zsh/zshrc
+grml_toggle_abbrev() {
+ if (( ${NOABBREVIATION} > 0 )) ; then
+ NOABBREVIATION=0
+ else
+ NOABBREVIATION=1
+ fi
+}
-If you want to stay in sync with zsh configuration of grml
-run 'ln -sf /etc/skel/.zshrc \$HOME/.zshrc' and configure
-your own stuff in \$HOME/.zshrc.local. System wide configuration
-without touching configuration files of grml can take place
-in /etc/zsh/zshrc.local.
+zle -N grml_toggle_abbrev
+bindkey '^xA' grml_toggle_abbrev
-If you want to use the configuration of user grml also when
-running as user root just run 'zshskel' which will source
-the file /etc/skel/.zshrc.
+# add a command line to the shells history without executing it
+commit-to-history() {
+ print -s ${(z)BUFFER}
+ zle send-break
+}
+zle -N commit-to-history
+bindkey "^x^h" commit-to-history
-For information regarding zsh start at http://grml.org/zsh/
+# only slash should be considered as a word separator:
+slash-backward-kill-word() {
+ local WORDCHARS="${WORDCHARS:s@/@}"
+ # zle backward-word
+ zle backward-kill-word
+}
+zle -N slash-backward-kill-word
+
+#k# Kill left-side word or everything up to next slash
+bindkey '\ev' slash-backward-kill-word
+#k# Kill left-side word or everything up to next slash
+bindkey '\e^h' slash-backward-kill-word
+#k# Kill left-side word or everything up to next slash
+bindkey '\e^?' slash-backward-kill-word
+
+# use the new *-pattern-* widgets for incremental history search
+if is439 ; then
+ bindkey '^r' history-incremental-pattern-search-backward
+ bindkey '^s' history-incremental-pattern-search-forward
+fi
-Take a look at grml's zsh refcard:
-% xpdf =(zcat /usr/share/doc/grml-docs/zsh/grml-zsh-refcard.pdf.gz)
+# a generic accept-line wrapper
-Check out the main zsh refcard:
-% $BROWSER http://www.bash2zsh.com/zsh_refcard/refcard.pdf
+# This widget can prevent unwanted autocorrections from command-name
+# to _command-name, rehash automatically on enter and call any number
+# of builtin and user-defined widgets in different contexts.
+#
+# For a broader description, see:
+# <http://bewatermyfriend.org/posts/2007/12-26.11-50-38-tooltime.html>
+#
+# The code is imported from the file 'zsh/functions/accept-line' from
+# <http://ft.bewatermyfriend.org/comp/zsh/zsh-dotfiles.tar.bz2>, which
+# distributed under the same terms as zsh itself.
+
+# A newly added command will may not be found or will cause false
+# correction attempts, if you got auto-correction set. By setting the
+# following style, we force accept-line() to rehash, if it cannot
+# find the first word on the command line in the $command[] hash.
+zstyle ':acceptline:*' rehash true
+
+function Accept-Line() {
+ setopt localoptions noksharrays
+ local -a subs
+ local -xi aldone
+ local sub
+ local alcontext=${1:-$alcontext}
+
+ zstyle -a ":acceptline:${alcontext}" actions subs
+
+ (( ${#subs} < 1 )) && return 0
+
+ (( aldone = 0 ))
+ for sub in ${subs} ; do
+ [[ ${sub} == 'accept-line' ]] && sub='.accept-line'
+ zle ${sub}
+
+ (( aldone > 0 )) && break
+ done
+}
-And of course visit the zsh-lovers:
-% man zsh-lovers
+function Accept-Line-getdefault() {
+ emulate -L zsh
+ local default_action
+
+ zstyle -s ":acceptline:${alcontext}" default_action default_action
+ case ${default_action} in
+ ((accept-line|))
+ printf ".accept-line"
+ ;;
+ (*)
+ printf ${default_action}
+ ;;
+ esac
+}
-You can adjust some options through environment variables when
-invoking zsh without having to edit configuration files.
-Basically meant for bash users who are not used to the power of
-the zsh yet. :)
+function Accept-Line-HandleContext() {
+ zle Accept-Line
- \"NOCOR=1 zsh\" => deactivate automatic correction
- \"NOMENU=1 zsh\" => do not use menu completion (note: use strg-d for completion instead!)
- \"NOPRECMD=1 zsh\" => disable the precmd + preexec commands (set GNU screen title)
- \"BATTERY=1 zsh\" => activate battery status (via acpi) on right side of prompt
-$bg[white]$fg[black]
-Please report wishes + bugs to the grml-team: http://grml.org/bugs/
-Enjoy your grml system with the zsh!$reset_color"
+ default_action=$(Accept-Line-getdefault)
+ zstyle -T ":acceptline:${alcontext}" call_default \
+ && zle ${default_action}
}
-# debian stuff
- if [ -r /etc/debian_version ] ; then
- alias acs='apt-cache search'
- alias acsh='apt-cache show'
- alias acp='apt-cache policy'
- alias adg="$SUDO apt-get dist-upgrade"
- alias agi="$SUDO apt-get install"
- alias ati="$SUDO aptitude install"
- alias ag="$SUDO apt-get upgrade"
- alias au="$SUDO apt-get update"
- alias up="$SUDO aptitude update ; $SUDO aptitude upgrade"
- alias dbp='dpkg-buildpackage'
- alias ge='grep-excuses'
+function accept-line() {
+ setopt localoptions noksharrays
+ local -ax cmdline
+ local -x alcontext
+ local buf com fname format msg default_action
- # debian upgrade
- upgrade () {
- if [ -z "$1" ] ; then
- $SUDO apt-get update
- $SUDO apt-get -u upgrade
- else
- ssh $1 $SUDO apt-get update
- # ask before the upgrade
- local dummy
- ssh $1 $SUDO apt-get --no-act upgrade
- echo -n 'Process the upgrade?'
- read -q dummy
- if [[ $dummy == "y" ]] ; then
- ssh $1 $SUDO apt-get -u upgrade --yes
- fi
- fi
- }
+ alcontext='default'
+ buf="${BUFFER}"
+ cmdline=(${(z)BUFFER})
+ com="${cmdline[1]}"
+ fname="_${com}"
- isgrmlcd && alias su="sudo su" # change to user root
- alias tlog="tail -f /var/log/syslog" # take a look at the syslog
- alias zshskel="source /etc/skel/.zshrc" # source skeleton zshrc
- fi
+ Accept-Line 'preprocess'
-# sort installed Debian-packages by size
- if [ -x /usr/bin/grep-status ] ; then
- alias debs-by-size='grep-status -FStatus -sInstalled-Size,Package \
- -n "install ok installed" | paste -sd " \n" | sort -rn'
- fi
+ zstyle -t ":acceptline:${alcontext}" rehash \
+ && [[ -z ${commands[$com]} ]] \
+ && rehash
-# if cdrecord is a symlink (to wodim) or isn't present at all warn:
- if [ -L /usr/bin/cdrecord -o ! -x $(which cdrecord) ] ; then
- if [ -x $(which wodim) ] ; then
- alias cdrecord="echo 'cdrecord is not provided under its original name by Debian anymore.
-See #377109 in the BTS of Debian for more details.
+ if [[ -n ${com} ]] \
+ && [[ -n ${reswords[(r)$com]} ]] \
+ || [[ -n ${aliases[$com]} ]] \
+ || [[ -n ${functions[$com]} ]] \
+ || [[ -n ${builtins[$com]} ]] \
+ || [[ -n ${commands[$com]} ]] ; then
-Please use the wodim binary instead' ; return 1"
- fi
- fi
+ # there is something sensible to execute, just do it.
+ alcontext='normal'
+ Accept-Line-HandleContext
-# I hate lacking backward compability, so provide an alternative therefore
- if ! [ -x /usr/sbin/apache2-ssl-certificate ] ; then
- function apache2-ssl-certificate(){
+ return
+ fi
- print 'Debian does not ship apache2-ssl-certificate anymore (see #398520). :('
- print 'You might want to take a look at Debian the package ssl-cert as well.'
- print 'To generate a certificate for use with apache2 follow the instructions:'
+ if [[ -o correct ]] \
+ || [[ -o correctall ]] \
+ && [[ -n ${functions[$fname]} ]] ; then
+
+ # nothing there to execute but there is a function called
+ # _command_name; a completion widget. Makes no sense to
+ # call it on the commandline, but the correct{,all} options
+ # will ask for it nevertheless, so warn the user.
+ if [[ ${LASTWIDGET} == 'accept-line' ]] ; then
+ # Okay, we warned the user before, he called us again,
+ # so have it his way.
+ alcontext='force'
+ Accept-Line-HandleContext
+
+ return
+ fi
- echo '
+ if zstyle -t ":acceptline:${alcontext}" nocompwarn ; then
+ alcontext='normal'
+ Accept-Line-HandleContext
+ else
+ # prepare warning message for the user, configurable via zstyle.
+ zstyle -s ":acceptline:${alcontext}" compwarnfmt msg
-export RANDFILE=/dev/random
-mkdir /etc/apache2/ssl/
-openssl req $@ -new -x509 -days 365 -nodes -out /etc/apache2/ssl/apache.pem -keyout /etc/apache2/ssl/apache.pem
-chmod 600 /etc/apache2/ssl/apache.pem
+ if [[ -z ${msg} ]] ; then
+ msg="%c will not execute and completion %f exists."
+ fi
-Run "grml-tips ssl-certificate" if you need further instructions.
-'
- }
- fi
-# }}}
+ zformat -f msg "${msg}" "c:${com}" "f:${fname}"
-# {{{ Use hard limits, except for a smaller stack and no core dumps
- unlimit
- limit stack 8192
- isgrmlcd && limit core 0 # important for a live-cd-system
- limit -s
-# }}}
+ zle -M -- "${msg}"
+ fi
+ return
+ elif [[ -n ${buf//[$' \t\n']##/} ]] ; then
+ # If we are here, the commandline contains something that is not
+ # executable, which is neither subject to _command_name correction
+ # and is not empty. might be a variable assignment
+ alcontext='misc'
+ Accept-Line-HandleContext
+
+ return
+ fi
-# {{{ completion stuff
+ # If we got this far, the commandline only contains whitespace, or is empty.
+ alcontext='empty'
+ Accept-Line-HandleContext
+}
-# Where to look for autoloaded function definitions
- if [ -d /etc/zsh/completion.d ] ; then
- local comp=/etc/zsh/completion.d
- for func in $comp/*(N-.:t); . ${comp}/${func}
- fi
+zle -N accept-line
+zle -N Accept-Line
+zle -N Accept-Line-HandleContext
-# called later (via is4 && grmlcomp)
-# notice: use 'zstyle' for getting current settings
-# press ^Xh (control-x h) for getting tags in context; ^X? (control-x ?) to run complete_debug with trace output
-grmlcomp() {
-## completion system
- zstyle ':completion:*:approximate:' max-errors 'reply=( $((($#PREFIX+$#SUFFIX)/3 )) numeric )' # allow one error for every three characters typed in approximate completer
- zstyle ':completion:*:complete:-command-::commands' ignored-patterns '*\~' # don't complete backup files as executables
- zstyle ':completion:*:correct:*' insert-unambiguous true # start menu completion only if it could find no unambiguous initial string
- zstyle ':completion:*:corrections' format $'%{\e[0;31m%}%d (errors: %e)%{\e[0m%}' #
- zstyle ':completion:*:correct:*' original true #
- zstyle ':completion:*:default' list-colors ${(s.:.)LS_COLORS} # activate color-completion(!)
- zstyle ':completion:*:descriptions' format $'%{\e[0;31m%}completing %B%d%b%{\e[0m%}' # format on completion
- zstyle ':completion:*:*:cd:*:directory-stack' menu yes select # complete 'cd -<tab>' with menu
- zstyle ':completion:*:expand:*' tag-order all-expansions # insert all expansions for expand completer
- zstyle ':completion:*:history-words' list false #
- zstyle ':completion:*:history-words' menu yes # activate menu
- zstyle ':completion:*:history-words' remove-all-dups yes # ignore duplicate entries
- zstyle ':completion:*:history-words' stop yes #
- zstyle ':completion:*' matcher-list 'm:{a-z}={A-Z}' # match uppercase from lowercase
- zstyle ':completion:*:matches' group 'yes' # separate matches into groups
- zstyle ':completion:*' group-name ''
- if [[ -z "$NOMENU" ]] ; then
- zstyle ':completion:*' menu select=5 # if there are more than 5 options allow selecting from a menu
- else
- setopt no_auto_menu # don't use any menus at all
- fi
- zstyle ':completion:*:messages' format '%d' #
- zstyle ':completion:*:options' auto-description '%d' #
- zstyle ':completion:*:options' description 'yes' # describe options in full
- zstyle ':completion:*:processes' command 'ps -au$USER' # on processes completion complete all user processes
- zstyle ':completion:*:*:-subscript-:*' tag-order indexes parameters # offer indexes before parameters in subscripts
- zstyle ':completion:*' verbose true # provide verbose completion information
- zstyle ':completion:*:warnings' format $'%{\e[0;31m%}No matches for:%{\e[0m%} %d' # set format for warnings
- zstyle ':completion:*:*:zcompile:*' ignored-patterns '(*~|*.zwc)' # define files to ignore for zcompile
- zstyle ':completion:correct:' prompt 'correct to: %e' #
- zstyle ':completion::(^approximate*):*:functions' ignored-patterns '_*' # Ignore completion functions for commands you don't have:
-
-# complete manual by their section
- zstyle ':completion:*:manuals' separate-sections true
- zstyle ':completion:*:manuals.*' insert-sections true
- zstyle ':completion:*:man:*' menu yes select
-
-## correction
-# run rehash on completion so new installed program are found automatically:
- _force_rehash() {
- (( CURRENT == 1 )) && rehash
- return 1 # Because we didn't really complete anything
- }
-# some people don't like the automatic correction - so run 'NOCOR=1 zsh' to deactivate it
- if [[ -n "$NOCOR" ]] ; then
- zstyle ':completion:*' completer _oldlist _expand _force_rehash _complete
- setopt nocorrect # do not try to correct the spelling if possible
- else
-# zstyle ':completion:*' completer _oldlist _expand _force_rehash _complete _correct _approximate
- setopt correct # try to correct the spelling if possible
- zstyle -e ':completion:*' completer '
- if [[ $_last_try != "$HISTNO$BUFFER$CURSOR" ]]; then
- _last_try="$HISTNO$BUFFER$CURSOR"
- reply=(_complete _match _prefix)
- else
- if [[ $words[1] = (rm|mv) ]]; then
- reply=(_complete)
- else
- reply=(_oldlist _expand _force_rehash _complete _correct _approximate)
- fi
- fi'
- fi
-# zstyle ':completion:*' completer _complete _correct _approximate
-# zstyle ':completion:*' expand prefix suffix
-
-# automatic rehash? Credits go to Frank Terbeck
-# function my_accept () {
-# local buf
-# [[ -z ${BUFFER} ]] && zle accept-line && return
-# buf=( ${(z)BUFFER} )
-# [[ -z ${commands[${buf[1]}]} ]] && rehash
-# zle accept-line
-# }
-# zle -N my_accept
-# bindkey "^M" my_accept
-
-# command for process lists, the local web server details and host completion
- zstyle ':completion:*:urls' local 'www' '/var/www/' 'public_html'
-
-# caching
- [ -d $ZSHDIR/cache ] && zstyle ':completion:*' use-cache yes && \
- zstyle ':completion::complete:*' cache-path $ZSHDIR/cache/
-
-# host completion /* add brackets as vim can't parse zsh's complex cmdlines 8-) {{{ */
- if is42 ; then
- [ -r ~/.ssh/known_hosts ] && _ssh_hosts=(${${${${(f)"$(<$HOME/.ssh/known_hosts)"}:#[\|]*}%%\ *}%%,*}) || _ssh_hosts=()
- [ -r /etc/hosts ] && : ${(A)_etc_hosts:=${(s: :)${(ps:\t:)${${(f)~~"$(</etc/hosts)"}%%\#*}##[:blank:]#[^[:blank:]]#}}} || _etc_hosts=()
- else
- _ssh_hosts=()
- _etc_hosts=()
- fi
- hosts=(
- `hostname`
- "$_ssh_hosts[@]"
- "$_etc_hosts[@]"
- grml.org
- localhost
- )
- zstyle ':completion:*:hosts' hosts $hosts
-# zstyle '*' hosts $hosts
-
-# specify your logins:
-# my_accounts=(
-# {grml,grml1}@foo.invalid
-# grml-devel@bar.invalid
-# )
-# other_accounts=(
-# {fred,root}@foo.invalid
-# vera@bar.invalid
-# )
-# zstyle ':completion:*:my-accounts' users-hosts $my_accounts
-# zstyle ':completion:*:other-accounts' users-hosts $other_accounts
-
-# specify specific port/service settings:
-# telnet_users_hosts_ports=(
-# user1@host1:
-# user2@host2:
-# @mail-server:{smtp,pop3}
-# @news-server:nntp
-# @proxy-server:8000
-# )
-# zstyle ':completion:*:*:telnet:*' users-hosts-ports $telnet_users_hosts_ports
-
-# use generic completion system for programs not yet defined:
- compdef _gnu_generic tail head feh cp mv df stow uname ipacsum fetchipac
-
-# see upgrade function in this file
- compdef _hosts upgrade
-}
-# }}}
-
-# {{{ grmlstuff
-grmlstuff() {
-# people should use 'grml-x'!
- function startx() {
- if [ -e /etc/X11/xorg.conf ] ; then
- [ -x /usr/bin/startx ] && /usr/bin/startx || /usr/X11R6/bin/startx
- else
- echo "Please use the script \"grml-x\" for starting the X Window System
-because there does not exist /etc/X11/xorg.conf yet.
-If you want to use startx anyway please call \"/usr/bin/startx\"."
- return -1
+# power completion - abbreviation expansion
+# power completion / abbreviation expansion / buffer expansion
+# see http://zshwiki.org/home/examples/zleiab for details
+# less risky than the global aliases but powerful as well
+# just type the abbreviation key and afterwards ',.' to expand it
+declare -A abk
+setopt extendedglob
+setopt interactivecomments
+abk=(
+# key # value (#d additional doc string)
+#A# start
+ '...' '../..'
+ '....' '../../..'
+ 'BG' '& exit'
+ 'C' '| wc -l'
+ 'G' '|& grep --color=auto '
+ 'H' '| head'
+ 'Hl' ' --help |& less -r' #d (Display help in pager)
+ 'L' '| less'
+ 'LL' '|& less -r'
+ 'M' '| most'
+ 'N' '&>/dev/null' #d (No Output)
+ 'R' '| tr A-z N-za-m' #d (ROT13)
+ 'SL' '| sort | less'
+ 'S' '| sort -u'
+ 'T' '| tail'
+ 'V' '|& vim -'
+#A# end
+ 'co' './configure && make && sudo make install'
+)
+
+globalias() {
+ emulate -L zsh
+ setopt extendedglob
+ local MATCH
+
+ if (( NOABBREVIATION > 0 )) ; then
+ LBUFFER="${LBUFFER},."
+ return 0
fi
- }
- function xinit() {
- if [ -e /etc/X11/xorg.conf ] ; then
- [ -x /usr/bin/xinit ] && /usr/bin/xinit || /usr/X11R6/bin/xinit
- else
- echo "Please use the script \"grml-x\" for starting the X Window System.
-because there does not exist /etc/X11/xorg.conf yet.
-If you want to use xinit anyway please call \"/usr/bin/xinit\"."
- return -1
- fi
- }
+ matched_chars='[.-|_a-zA-Z0-9]#'
+ LBUFFER=${LBUFFER%%(#m)[.-|_a-zA-Z0-9]#}
+ LBUFFER+=${abk[$MATCH]:-$MATCH}
+}
- if [ -x /usr/sbin/915resolution ] ; then
- alias 855resolution='echo -e "Please use 915resolution as resolution modify tool for Intel graphic chipset."; return -1'
- fi
+zle -N globalias
+bindkey ",." globalias
- alias grml-version='cat /etc/grml_version'
+# autoloading
+zrcautoload zmv # who needs mmv or rename?
+zrcautoload history-search-end
- if [ -x /usr/sbin/rebuildfstab ] ; then
- alias grml-rebuildfstab='rebuildfstab -v -r -config'
- fi
-}
-# }}}
+# we don't want to quote/espace URLs on our own...
+# if autoload -U url-quote-magic ; then
+# zle -N self-insert url-quote-magic
+# zstyle ':url-quote-magic:*' url-metas '*?[]^()~#{}='
+# else
+# print 'Notice: no url-quote-magic available :('
+# fi
+alias url-quote='autoload -U url-quote-magic ; zle -N self-insert url-quote-magic'
-# {{{ now run the functions
- isgrml && checkhome
- is4 && isgrml && grmlstuff
- is4 && grmlcomp
-# }}}
+#m# k ESC-h Call \kbd{run-help} for the 1st word on the command line
+alias run-help >&/dev/null && unalias run-help
+for rh in run-help{,-git,-svk,-svn}; do
+ zrcautoload $rh
+done; unset rh
-# {{{ keephack
- [ -r /etc/zsh/keephack ] && is4 && source /etc/zsh/keephack
-# }}}
+# completion system
+if zrcautoload compinit ; then
+ compinit || print 'Notice: no compinit available :('
+else
+ print 'Notice: no compinit available :('
+ function zstyle { }
+ function compdef { }
+fi
-# {{{ wonderful idea of using "e" glob qualifier by Peter Stephenson
-# You use it as follows:
-# $ NTREF=/reference/file
-# $ ls -l *(e:nt:)
-# This lists all the files in the current directory newer than the reference file.
-# You can also specify the reference file inline; note quotes:
-# $ ls -l *(e:'nt ~/.zshenv':)
- is4 && nt() {
- if [[ -n $1 ]]; then
- local NTREF=${~1}
- fi
- [[ $REPLY -nt $NTREF ]]
- }
-# }}}
-
-# shell functions {{{
- setenv() { typeset -x "${1}${1:+=}${(@)argv[2,$#]}" } # csh compatibility
- freload() { while (( $# )); do; unfunction $1; autoload -U $1; shift; done }
- reload () {
- if [[ "$#*" -eq 0 ]]; then
- [ -r ~/.zshrc ] && . ~/.zshrc
- else
- local fn
- for fn in "$@"; do
- unfunction $fn
- autoload -U $fn
- done
- fi
- }
- compdef _functions reload freload
-
- # fast manual access
- if type -p qma &>/dev/null ; then
- manzsh() { qma zshall "$1" }
- compdef _man qma
- else
- manzsh() { /usr/bin/man zshall | vim -c "se ft=man| se hlsearch" +/"$1" - ; }
- # manzsh() { /usr/bin/man zshall | most +/"$1" ; }
- # manzsh() { man zshall | $MYLESS -p $1 ; }
- fi
+is4 && zrcautoload zed # use ZLE editor to edit a file or function
-# use "dchange <package-name>" to view Debian's changelog of the package:
- dchange() {
- if [ -r /usr/share/doc/${1}/changelog.Debian.gz ] ; then
- most /usr/share/doc/${1}/changelog.Debian.gz
- else
- if [ -r /usr/share/doc/${1}/changelog.gz ] ; then
- most /usr/share/doc/${1}/changelog.gz
- else
- echo "No changelog for package $1 found, sorry."
- return 1
- fi
- fi
- }
- _dchange() { _files -W /usr/share/doc -/ }
- compdef _dchange dchange
-
-# use "uchange <package-name>" to view upstream's changelog of the package:
- uchange() {
- if [ -r /usr/share/doc/${1}/changelog.gz ] ; then
- most /usr/share/doc/${1}/changelog.gz
- else
- echo "No changelog for package $1 found, sorry."
- return 1
- fi
- }
- _uchange() { _files -W /usr/share/doc -/ }
- compdef _uchange uchange
+is4 && \
+for mod in complist deltochar mathfunc ; do
+ zmodload -i zsh/${mod} 2>/dev/null || print "Notice: no ${mod} available :("
+done
-# zsh profiling
- profile () {
- ZSH_PROFILE_RC=1 $SHELL "$@"
- }
-
-# edit alias via zle:
- edalias() {
- [ -z "$1" ] && { echo "Usage: edalias <alias_to_edit>" ; return 1 } || vared aliases'[$1]' ;
- }
- compdef _aliases edalias
-
-# edit function via zle:
- edfunc() {
- [ -z "$1" ] && { echo "Usage: edfun <function_to_edit>" ; return 1 } || zed -f "$1" ;
- }
- compdef _functions edfunc
+# autoload zsh modules when they are referenced
+if is4 ; then
+ zmodload -a zsh/stat zstat
+ zmodload -a zsh/zpty zpty
+ zmodload -ap zsh/mapfile mapfile
+fi
+
+if is4 && zrcautoload insert-files && zle -N insert-files ; then
+ #k# Insert files and test globbing
+ bindkey "^Xf" insert-files # C-x-f
+fi
+
+bindkey ' ' magic-space # also do history expansion on space
+#k# Trigger menu-complete
+bindkey '\ei' menu-complete # menu completion via esc-i
+
+# press esc-e for editing command line in $EDITOR or $VISUAL
+if is4 && zrcautoload edit-command-line && zle -N edit-command-line ; then
+ #k# Edit the current line in \kbd{\$EDITOR}
+ bindkey '\ee' edit-command-line
+fi
+
+if is4 && [[ -n ${(k)modules[zsh/complist]} ]] ; then
+ #k# menu selection: pick item but stay in the menu
+ bindkey -M menuselect '\e^M' accept-and-menu-complete
+ # also use + and INSERT since it's easier to press repeatedly
+ bindkey -M menuselect "+" accept-and-menu-complete
+ bindkey -M menuselect "^[[2~" accept-and-menu-complete
+
+ # accept a completion and try to complete again by using menu
+ # completion; very useful with completing directories
+ # by using 'undo' one's got a simple file browser
+ bindkey -M menuselect '^o' accept-and-infer-next-history
+fi
+
+# press "ctrl-e d" to insert the actual date in the form yyyy-mm-dd
+insert-datestamp() { LBUFFER+=${(%):-'%D{%Y-%m-%d}'}; }
+zle -N insert-datestamp
+
+#k# Insert a timestamp on the command line (yyyy-mm-dd)
+bindkey '^Ed' insert-datestamp
+
+# press esc-m for inserting last typed word again (thanks to caphuso!)
+insert-last-typed-word() { zle insert-last-word -- 0 -1 };
+zle -N insert-last-typed-word;
+
+#k# Insert last typed word
+bindkey "\em" insert-last-typed-word
+
+function grml-zsh-fg() {
+ if (( ${#jobstates} )); then
+ zle .push-input
+ [[ -o hist_ignore_space ]] && BUFFER=' ' || BUFFER=''
+ BUFFER="${BUFFER}fg"
+ zle .accept-line
+ else
+ zle -M 'No background jobs. Doing nothing.'
+ fi
+}
+zle -N grml-zsh-fg
+#k# A smart shortcut for \kbd{fg<enter>}
+bindkey '^z' grml-zsh-fg
+
+# run command line as user root via sudo:
+sudo-command-line() {
+ [[ -z $BUFFER ]] && zle up-history
+ if [[ $BUFFER != sudo\ * ]]; then
+ BUFFER="sudo $BUFFER"
+ CURSOR=$(( CURSOR+5 ))
+ fi
+}
+zle -N sudo-command-line
+
+#k# prepend the current command with "sudo"
+bindkey "^Os" sudo-command-line
+
+### jump behind the first word on the cmdline.
+### useful to add options.
+function jump_after_first_word() {
+ local words
+ words=(${(z)BUFFER})
+
+ if (( ${#words} <= 1 )) ; then
+ CURSOR=${#BUFFER}
+ else
+ CURSOR=${#${words[1]}}
+ fi
+}
+zle -N jump_after_first_word
+#k# jump to after first word (for adding options)
+bindkey '^x1' jump_after_first_word
+
+# complete word from history with menu (from Book: ZSH, OpenSource-Press)
+zle -C hist-complete complete-word _generic
+zstyle ':completion:hist-complete:*' completer _history
+#k# complete word from history with menu
+bindkey "^X^X" hist-complete
+
+## complete word from currently visible Screen or Tmux buffer.
+if check_com -c screen || check_com -c tmux; then
+ _complete_screen_display() {
+ [[ "$TERM" != "screen" ]] && return 1
+
+ local TMPFILE=$(mktemp)
+ local -U -a _screen_display_wordlist
+ trap "rm -f $TMPFILE" EXIT
+
+ # fill array with contents from screen hardcopy
+ if ((${+TMUX})); then
+ #works, but crashes tmux below version 1.4
+ #luckily tmux -V option to ask for version, was also added in 1.4
+ tmux -V &>/dev/null || return
+ tmux -q capture-pane \; save-buffer -b 0 $TMPFILE \; delete-buffer -b 0
+ else
+ screen -X hardcopy $TMPFILE
+ #screen sucks, it dumps in latin1, apparently always. so recode it to system charset
+ check_com recode && recode latin1 $TMPFILE
+ fi
+ _screen_display_wordlist=( ${(QQ)$(<$TMPFILE)} )
+ # remove PREFIX to be completed from that array
+ _screen_display_wordlist[${_screen_display_wordlist[(i)$PREFIX]}]=""
+ compadd -a _screen_display_wordlist
+ }
+ #k# complete word from currently visible GNU screen buffer
+ bindkey -r "^XS"
+ compdef -k _complete_screen_display complete-word '^XS'
+fi
+
+# history
+
+ZSHDIR=$HOME/.zsh
+
+#v#
+HISTFILE=$HOME/.zsh_history
+isgrmlcd && HISTSIZE=500 || HISTSIZE=5000
+isgrmlcd && SAVEHIST=1000 || SAVEHIST=10000 # useful for setopt append_history
+
+# dirstack handling
+
+DIRSTACKSIZE=${DIRSTACKSIZE:-20}
+DIRSTACKFILE=${DIRSTACKFILE:-${HOME}/.zdirs}
+
+if [[ -f ${DIRSTACKFILE} ]] && [[ ${#dirstack[*]} -eq 0 ]] ; then
+ dirstack=( ${(f)"$(< $DIRSTACKFILE)"} )
+ # "cd -" won't work after login by just setting $OLDPWD, so
+ [[ -d $dirstack[1] ]] && cd $dirstack[1] && cd $OLDPWD
+fi
+
+chpwd() {
+ local -ax my_stack
+ my_stack=( ${PWD} ${dirstack} )
+ if is42 ; then
+ builtin print -l ${(u)my_stack} >! ${DIRSTACKFILE}
+ else
+ uprint my_stack >! ${DIRSTACKFILE}
+ fi
+}
+
+# directory based profiles
+
+if is433 ; then
+
+CHPWD_PROFILE='default'
+function chpwd_profiles() {
+ # Say you want certain settings to be active in certain directories.
+ # This is what you want.
+ #
+ # zstyle ':chpwd:profiles:/usr/src/grml(|/|/*)' profile grml
+ # zstyle ':chpwd:profiles:/usr/src/debian(|/|/*)' profile debian
+ #
+ # When that's done and you enter a directory that matches the pattern
+ # in the third part of the context, a function called chpwd_profile_grml,
+ # for example, is called (if it exists).
+ #
+ # If no pattern matches (read: no profile is detected) the profile is
+ # set to 'default', which means chpwd_profile_default is attempted to
+ # be called.
+ #
+ # A word about the context (the ':chpwd:profiles:*' stuff in the zstyle
+ # command) which is used: The third part in the context is matched against
+ # ${PWD}. That's why using a pattern such as /foo/bar(|/|/*) makes sense.
+ # Because that way the profile is detected for all these values of ${PWD}:
+ # /foo/bar
+ # /foo/bar/
+ # /foo/bar/baz
+ # So, if you want to make double damn sure a profile works in /foo/bar
+ # and everywhere deeper in that tree, just use (|/|/*) and be happy.
+ #
+ # The name of the detected profile will be available in a variable called
+ # 'profile' in your functions. You don't need to do anything, it'll just
+ # be there.
+ #
+ # Then there is the parameter $CHPWD_PROFILE is set to the profile, that
+ # was is currently active. That way you can avoid running code for a
+ # profile that is already active, by running code such as the following
+ # at the start of your function:
+ #
+ # function chpwd_profile_grml() {
+ # [[ ${profile} == ${CHPWD_PROFILE} ]] && return 1
+ # ...
+ # }
+ #
+ # The initial value for $CHPWD_PROFILE is 'default'.
+ #
+ # Version requirement:
+ # This feature requires zsh 4.3.3 or newer.
+ # If you use this feature and need to know whether it is active in your
+ # current shell, there are several ways to do that. Here are two simple
+ # ways:
+ #
+ # a) If knowing if the profiles feature is active when zsh starts is
+ # good enough for you, you can put the following snippet into your
+ # .zshrc.local:
+ #
+ # (( ${+functions[chpwd_profiles]} )) && print "directory profiles active"
+ #
+ # b) If that is not good enough, and you would prefer to be notified
+ # whenever a profile changes, you can solve that by making sure you
+ # start *every* profile function you create like this:
+ #
+ # function chpwd_profile_myprofilename() {
+ # [[ ${profile} == ${CHPWD_PROFILE} ]] && return 1
+ # print "chpwd(): Switching to profile: $profile"
+ # ...
+ # }
+ #
+ # That makes sure you only get notified if a profile is *changed*,
+ # not everytime you change directory, which would probably piss
+ # you off fairly quickly. :-)
+ #
+ # There you go. Now have fun with that.
+ local -x profile
+
+ zstyle -s ":chpwd:profiles:${PWD}" profile profile || profile='default'
+ if (( ${+functions[chpwd_profile_$profile]} )) ; then
+ chpwd_profile_${profile}
+ fi
+
+ CHPWD_PROFILE="${profile}"
+ return 0
+}
+chpwd_functions=( ${chpwd_functions} chpwd_profiles )
+
+fi # is433
+
+# display battery status on right side of prompt via running 'BATTERY=1 zsh'
+if [[ $BATTERY -gt 0 ]] ; then
+ if ! check_com -c acpi ; then
+ BATTERY=0
+ fi
+fi
+
+battery() {
+if [[ $BATTERY -gt 0 ]] ; then
+ PERCENT="${${"$(acpi 2>/dev/null)"}/(#b)[[:space:]]#Battery <->: [^0-9]##, (<->)%*/${match[1]}}"
+ if [[ -z "$PERCENT" ]] ; then
+ PERCENT='acpi not present'
+ else
+ if [[ "$PERCENT" -lt 20 ]] ; then
+ PERCENT="warning: ${PERCENT}%%"
+ else
+ PERCENT="${PERCENT}%%"
+ fi
+ fi
+fi
+}
+# set colors for use in prompts
+if zrcautoload colors && colors 2>/dev/null ; then
+ BLUE="%{${fg[blue]}%}"
+ RED="%{${fg_bold[red]}%}"
+ GREEN="%{${fg[green]}%}"
+ CYAN="%{${fg[cyan]}%}"
+ MAGENTA="%{${fg[magenta]}%}"
+ YELLOW="%{${fg[yellow]}%}"
+ WHITE="%{${fg[white]}%}"
+ NO_COLOUR="%{${reset_color}%}"
+else
+ BLUE=$'%{\e[1;34m%}'
+ RED=$'%{\e[1;31m%}'
+ GREEN=$'%{\e[1;32m%}'
+ CYAN=$'%{\e[1;36m%}'
+ WHITE=$'%{\e[1;37m%}'
+ MAGENTA=$'%{\e[1;35m%}'
+ YELLOW=$'%{\e[1;33m%}'
+ NO_COLOUR=$'%{\e[0m%}'
+fi
+
+# gather version control information for inclusion in a prompt
+
+if zrcautoload vcs_info; then
+ # `vcs_info' in zsh versions 4.3.10 and below have a broken `_realpath'
+ # function, which can cause a lot of trouble with our directory-based
+ # profiles. So:
+ if [[ ${ZSH_VERSION} == 4.3.<-10> ]] ; then
+ function VCS_INFO_realpath () {
+ setopt localoptions NO_shwordsplit chaselinks
+ ( builtin cd -q $1 2> /dev/null && pwd; )
+ }
+ fi
+
+ zstyle ':vcs_info:*' max-exports 2
+
+ if [[ -o restricted ]]; then
+ zstyle ':vcs_info:*' enable NONE
+ fi
+fi
+
+# Change vcs_info formats for the grml prompt. The 2nd format sets up
+# $vcs_info_msg_1_ to contain "zsh: repo-name" used to set our screen title.
+# TODO: The included vcs_info() version still uses $VCS_INFO_message_N_.
+# That needs to be the use of $VCS_INFO_message_N_ needs to be changed
+# to $vcs_info_msg_N_ as soon as we use the included version.
+if [[ "$TERM" == dumb ]] ; then
+ zstyle ':vcs_info:*' actionformats "(%s%)-[%b|%a] " "zsh: %r"
+ zstyle ':vcs_info:*' formats "(%s%)-[%b] " "zsh: %r"
+else
+ # these are the same, just with a lot of colours:
+ zstyle ':vcs_info:*' actionformats "${MAGENTA}(${NO_COLOUR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${YELLOW}|${RED}%a${MAGENTA}]${NO_COLOUR} " \
+ "zsh: %r"
+ zstyle ':vcs_info:*' formats "${MAGENTA}(${NO_COLOUR}%s${MAGENTA})${YELLOW}-${MAGENTA}[${GREEN}%b${MAGENTA}]${NO_COLOUR}%} " \
+ "zsh: %r"
+ zstyle ':vcs_info:(sv[nk]|bzr):*' branchformat "%b${RED}:${YELLOW}%r"
+fi
+
+# command not found handling
+
+(( ${COMMAND_NOT_FOUND} == 1 )) &&
+function command_not_found_handler() {
+ emulate -L zsh
+ if [[ -x ${GRML_ZSH_CNF_HANDLER} ]] ; then
+ ${GRML_ZSH_CNF_HANDLER} $1
+ fi
+ return 1
+}
+
+# set prompt
+if zrcautoload promptinit && promptinit 2>/dev/null ; then
+ promptinit # people should be able to use their favourite prompt
+else
+ print 'Notice: no promptinit available :('
+fi
+
+setopt prompt_subst
+
+# make sure to use right prompt only when not running a command
+is41 && setopt transient_rprompt
+
+
+function ESC_print () {
+ info_print $'\ek' $'\e\\' "$@"
+}
+function set_title () {
+ info_print $'\e]0;' $'\a' "$@"
+}
+
+function info_print () {
+ local esc_begin esc_end
+ esc_begin="$1"
+ esc_end="$2"
+ shift 2
+ printf '%s' ${esc_begin}
+ printf '%s' "$*"
+ printf '%s' "${esc_end}"
+}
+
+# TODO: revise all these NO* variables and especially their documentation
+# in zsh-help() below.
+is4 && [[ $NOPRECMD -eq 0 ]] && precmd () {
+ [[ $NOPRECMD -gt 0 ]] && return 0
+ # update VCS information
+ (( ${+functions[vcs_info]} )) && vcs_info
+
+ if [[ $TERM == screen* ]] ; then
+ if [[ -n ${vcs_info_msg_1_} ]] ; then
+ ESC_print ${vcs_info_msg_1_}
+ else
+ ESC_print "zsh"
+ fi
+ fi
+ # just use DONTSETRPROMPT=1 to be able to overwrite RPROMPT
+ if [[ ${DONTSETRPROMPT:-} -eq 0 ]] ; then
+ if [[ $BATTERY -gt 0 ]] ; then
+ # update battery (dropped into $PERCENT) information
+ battery
+ RPROMPT="%(?..:() ${PERCENT}"
+ else
+ RPROMPT="%(?..:() "
+ fi
+ fi
+ # adjust title of xterm
+ # see http://www.faqs.org/docs/Linux-mini/Xterm-Title.html
+ [[ ${NOTITLE:-} -gt 0 ]] && return 0
+ case $TERM in
+ (xterm*|rxvt*)
+ set_title ${(%):-"%n@%m: %~"}
+ ;;
+ esac
+}
+
+# preexec() => a function running before every command
+is4 && [[ $NOPRECMD -eq 0 ]] && \
+preexec () {
+ [[ $NOPRECMD -gt 0 ]] && return 0
+# set hostname if not running on host with name 'grml'
+ if [[ -n "$HOSTNAME" ]] && [[ "$HOSTNAME" != $(hostname) ]] ; then
+ NAME="@$HOSTNAME"
+ fi
+# get the name of the program currently running and hostname of local machine
+# set screen window title if running in a screen
+ if [[ "$TERM" == screen* ]] ; then
+ # local CMD=${1[(wr)^(*=*|sudo|ssh|-*)]} # don't use hostname
+ local CMD="${1[(wr)^(*=*|sudo|ssh|-*)]}$NAME" # use hostname
+ ESC_print ${CMD}
+ fi
+# adjust title of xterm
+ [[ ${NOTITLE} -gt 0 ]] && return 0
+ case $TERM in
+ (xterm*|rxvt*)
+ set_title "${(%):-"%n@%m:"}" "$1"
+ ;;
+ esac
+}
+
+EXITCODE="%(?..%?%1v )"
+PS2='\`%_> ' # secondary prompt, printed when the shell needs more information to complete a command.
+PS3='?# ' # selection prompt used within a select loop.
+PS4='+%N:%i:%_> ' # the execution trace prompt (setopt xtrace). default: '+%N:%i>'
+
+# set variable debian_chroot if running in a chroot with /etc/debian_chroot
+if [[ -z "$debian_chroot" ]] && [[ -r /etc/debian_chroot ]] ; then
+ debian_chroot=$(cat /etc/debian_chroot)
+fi
+
+# don't use colors on dumb terminals (like emacs):
+if [[ "$TERM" == dumb ]] ; then
+ PROMPT="${EXITCODE}${debian_chroot:+($debian_chroot)}%n@%m %40<...<%B%~%b%<< "
+else
+ # only if $GRMLPROMPT is set (e.g. via 'GRMLPROMPT=1 zsh') use the extended prompt
+ # set variable identifying the chroot you work in (used in the prompt below)
+ if [[ $GRMLPROMPT -gt 0 ]] ; then
+ PROMPT="${RED}${EXITCODE}${CYAN}[%j running job(s)] ${GREEN}{history#%!} ${RED}%(3L.+.) ${BLUE}%* %D
+${BLUE}%n${NO_COLOUR}@%m %40<...<%B%~%b%<< "
+ else
+ # This assembles the primary prompt string
+ if (( EUID != 0 )); then
+ PROMPT="${RED}${EXITCODE}${WHITE}${debian_chroot:+($debian_chroot)}${BLUE}%n${NO_COLOUR}@%m %40<...<%B%~%b%<< "
+ else
+ PROMPT="${BLUE}${EXITCODE}${WHITE}${debian_chroot:+($debian_chroot)}${RED}%n${NO_COLOUR}@%m %40<...<%B%~%b%<< "
+ fi
+ fi
+fi
+
+PROMPT="${PROMPT}"'${vcs_info_msg_0_}'"%# "
+
+# if we are inside a grml-chroot set a specific prompt theme
+if [[ -n "$GRML_CHROOT" ]] ; then
+ PROMPT="%{$fg[red]%}(CHROOT) %{$fg_bold[red]%}%n%{$fg_no_bold[white]%}@%m %40<...<%B%~%b%<< %\# "
+fi
+
+# 'hash' some often used directories
+#d# start
+hash -d deb=/var/cache/apt/archives
+hash -d doc=/usr/share/doc
+hash -d linux=/lib/modules/$(command uname -r)/build/
+hash -d log=/var/log
+hash -d slog=/var/log/syslog
+hash -d src=/usr/src
+hash -d templ=/usr/share/doc/grml-templates
+hash -d tt=/usr/share/doc/texttools-doc
+hash -d www=/var/www
+#d# end
+
+# some aliases
+if check_com -c screen ; then
+ if [[ $UID -eq 0 ]] ; then
+ [[ -r /etc/grml/screenrc ]] && alias screen="${commands[screen]} -c /etc/grml/screenrc"
+ elif [[ -r $HOME/.screenrc ]] ; then
+ alias screen="${commands[screen]} -c $HOME/.screenrc"
+ else
+ if [[ -r /etc/grml/screenrc_grml ]]; then
+ alias screen="${commands[screen]} -c /etc/grml/screenrc_grml"
+ else
+ [[ -r /etc/grml/screenrc ]] && alias screen="${commands[screen]} -c /etc/grml/screenrc"
+ fi
+ fi
+fi
+
+# do we have GNU ls with color-support?
+if ls --help 2>/dev/null | grep -- --color= >/dev/null && [[ "$TERM" != dumb ]] ; then
+ #a1# execute \kbd{@a@}:\quad ls with colors
+ alias ls='ls -b -CF --color=auto'
+ #a1# execute \kbd{@a@}:\quad list all files, with colors
+ alias la='ls -la --color=auto'
+ #a1# long colored list, without dotfiles (@a@)
+ alias ll='ls -l --color=auto'
+ #a1# long colored list, human readable sizes (@a@)
+ alias lh='ls -hAl --color=auto'
+ #a1# List files, append qualifier to filenames \\&\quad(\kbd{/} for directories, \kbd{@} for symlinks ...)
+ alias l='ls -lF --color=auto'
+else
+ alias ls='ls -b -CF'
+ alias la='ls -la'
+ alias ll='ls -l'
+ alias lh='ls -hAl'
+ alias l='ls -lF'
+fi
+
+alias mdstat='cat /proc/mdstat'
+alias ...='cd ../../'
+
+# generate alias named "$KERNELVERSION-reboot" so you can use boot with kexec:
+if [[ -x /sbin/kexec ]] && [[ -r /proc/cmdline ]] ; then
+ alias "$(uname -r)-reboot"="kexec -l --initrd=/boot/initrd.img-"$(uname -r)" --command-line=\"$(cat /proc/cmdline)\" /boot/vmlinuz-"$(uname -r)""
+fi
+
+alias cp='nocorrect cp' # no spelling correction on cp
+alias mkdir='nocorrect mkdir' # no spelling correction on mkdir
+alias mv='nocorrect mv' # no spelling correction on mv
+alias rm='nocorrect rm' # no spelling correction on rm
+
+#a1# Execute \kbd{rmdir}
+alias rd='rmdir'
+#a1# Execute \kbd{mkdir}
+alias md='mkdir'
+
+# see http://www.cl.cam.ac.uk/~mgk25/unicode.html#term for details
+alias term2iso="echo 'Setting terminal to iso mode' ; print -n '\e%@'"
+alias term2utf="echo 'Setting terminal to utf-8 mode'; print -n '\e%G'"
+
+# make sure it is not assigned yet
+[[ -n ${aliases[utf2iso]} ]] && unalias utf2iso
+utf2iso() {
+ if isutfenv ; then
+ for ENV in $(env | command grep -i '.utf') ; do
+ eval export "$(echo $ENV | sed 's/UTF-8/iso885915/ ; s/utf8/iso885915/')"
+ done
+ fi
+}
+
+# make sure it is not assigned yet
+[[ -n ${aliases[iso2utf]} ]] && unalias iso2utf
+iso2utf() {
+ if ! isutfenv ; then
+ for ENV in $(env | command grep -i '\.iso') ; do
+ eval export "$(echo $ENV | sed 's/iso.*/UTF-8/ ; s/ISO.*/UTF-8/')"
+ done
+ fi
+}
+
+# I like clean prompt, so provide simple way to get that
+check_com 0 || alias 0='return 0'
+
+# for really lazy people like mika:
+check_com S &>/dev/null || alias S='screen'
+check_com s &>/dev/null || alias s='ssh'
+
+# especially for roadwarriors using GNU screen and ssh:
+if ! check_com asc &>/dev/null ; then
+ asc() { autossh -t "$@" 'screen -RdU' }
+ compdef asc=ssh
+fi
+
+# get top 10 shell commands:
+alias top10='print -l ${(o)history%% *} | uniq -c | sort -nr | head -n 10'
+
+# truecrypt; use e.g. via 'truec /dev/ice /mnt/ice' or 'truec -i'
+if check_com -c truecrypt ; then
+ if isutfenv ; then
+ alias truec='truecrypt --mount-options "rw,sync,dirsync,users,uid=1000,gid=users,umask=077,utf8" '
+ else
+ alias truec='truecrypt --mount-options "rw,sync,dirsync,users,uid=1000,gid=users,umask=077" '
+ fi
+fi
+
+#f1# Hints for the use of zsh on grml
+zsh-help() {
+ print "$bg[white]$fg[black]
+zsh-help - hints for use of zsh on grml
+=======================================$reset_color"
+
+ print '
+Main configuration of zsh happens in /etc/zsh/zshrc.
+That file is part of the package grml-etc-core, if you want to
+use them on a non-grml-system just get the tar.gz from
+http://deb.grml.org/ or (preferably) get it from the git repository:
+
+ http://git.grml.org/f/grml-etc-core/etc/zsh/zshrc
+
+This version of grml'\''s zsh setup does not use skel/.zshrc anymore.
+The file is still there, but it is empty for backwards compatibility.
+
+For your own changes use these two files:
+ $HOME/.zshrc.pre
+ $HOME/.zshrc.local
+
+The former is sourced very early in our zshrc, the latter is sourced
+very lately.
+
+System wide configuration without touching configuration files of grml
+can take place in /etc/zsh/zshrc.local.
+
+Normally, the root user (EUID == 0) does not get the whole grml setup.
+If you want to force the whole setup for that user, too, set
+GRML_ALWAYS_LOAD_ALL=1 in .zshrc.pre in root'\''s home directory.
+
+For information regarding zsh start at http://grml.org/zsh/
+
+Take a look at grml'\''s zsh refcard:
+% xpdf =(zcat /usr/share/doc/grml-docs/zsh/grml-zsh-refcard.pdf.gz)
+
+Check out the main zsh refcard:
+% '$BROWSER' http://www.bash2zsh.com/zsh_refcard/refcard.pdf
+
+And of course visit the zsh-lovers:
+% man zsh-lovers
+
+You can adjust some options through environment variables when
+invoking zsh without having to edit configuration files.
+Basically meant for bash users who are not used to the power of
+the zsh yet. :)
+
+ "NOCOR=1 zsh" => deactivate automatic correction
+ "NOMENU=1 zsh" => do not use auto menu completion (note: use ctrl-d for completion instead!)
+ "NOPRECMD=1 zsh" => disable the precmd + preexec commands (set GNU screen title)
+ "NOTITLE=1 zsh" => disable setting the title of xterms without disabling
+ preexec() and precmd() completely
+ "BATTERY=1 zsh" => activate battery status (via acpi) on right side of prompt
+ "COMMAND_NOT_FOUND=1 zsh"
+ => Enable a handler if an external command was not found
+ The command called in the handler can be altered by setting
+ the GRML_ZSH_CNF_HANDLER variable, the default is:
+ "/usr/share/command-not-found/command-not-found"
+
+A value greater than 0 is enables a feature; a value equal to zero
+disables it. If you like one or the other of these settings, you can
+add them to ~/.zshrc.pre to ensure they are set when sourcing grml'\''s
+zshrc.'
+
+ print "
+$bg[white]$fg[black]
+Please report wishes + bugs to the grml-team: http://grml.org/bugs/
+Enjoy your grml system with the zsh!$reset_color"
+}
+
+# debian stuff
+if [[ -r /etc/debian_version ]] ; then
+ #a3# Execute \kbd{apt-cache search}
+ alias acs='apt-cache search'
+ #a3# Execute \kbd{apt-cache show}
+ alias acsh='apt-cache show'
+ #a3# Execute \kbd{apt-cache policy}
+ alias acp='apt-cache policy'
+ #a3# Execute \kbd{apt-get dist-upgrade}
+ salias adg="apt-get dist-upgrade"
+ #a3# Execute \kbd{apt-get install}
+ salias agi="apt-get install"
+ #a3# Execute \kbd{aptitude install}
+ salias ati="aptitude install"
+ #a3# Execute \kbd{apt-get upgrade}
+ salias ag="apt-get upgrade"
+ #a3# Execute \kbd{apt-get update}
+ salias au="apt-get update"
+ #a3# Execute \kbd{aptitude update ; aptitude safe-upgrade}
+ salias -a up="aptitude update ; aptitude safe-upgrade"
+ #a3# Execute \kbd{dpkg-buildpackage}
+ alias dbp='dpkg-buildpackage'
+ #a3# Execute \kbd{grep-excuses}
+ alias ge='grep-excuses'
+
+ # debian upgrade
+ #f3# Execute \kbd{apt-get update \&\& }\\&\quad \kbd{apt-get dist-upgrade}
+ upgrade() {
+ emulate -L zsh
+ if [[ -z $1 ]] ; then
+ $SUDO apt-get update
+ $SUDO apt-get -u upgrade
+ else
+ ssh $1 $SUDO apt-get update
+ # ask before the upgrade
+ local dummy
+ ssh $1 $SUDO apt-get --no-act upgrade
+ echo -n 'Process the upgrade?'
+ read -q dummy
+ if [[ $dummy == "y" ]] ; then
+ ssh $1 $SUDO apt-get -u upgrade --yes
+ fi
+ fi
+ }
+
+ # get a root shell as normal user in live-cd mode:
+ if isgrmlcd && [[ $UID -ne 0 ]] ; then
+ alias su="sudo su"
+ fi
+
+ #a1# Take a look at the syslog: \kbd{\$PAGER /var/log/syslog}
+ salias llog="$PAGER /var/log/syslog" # take a look at the syslog
+ #a1# Take a look at the syslog: \kbd{tail -f /var/log/syslog}
+ salias tlog="tail -f /var/log/syslog" # follow the syslog
+fi
+
+# sort installed Debian-packages by size
+if check_com -c dpkg-query ; then
+ #a3# List installed Debian-packages sorted by size
+ alias debs-by-size="dpkg-query -Wf 'x \${Installed-Size} \${Package} \${Status}\n' | sed -ne '/^x /d' -e '/^x \(.*\) install ok installed$/s//\1/p' | sort -nr"
+fi
+
+# if cdrecord is a symlink (to wodim) or isn't present at all warn:
+if [[ -L /usr/bin/cdrecord ]] || ! check_com -c cdrecord; then
+ if check_com -c wodim; then
+ cdrecord() {
+ cat <<EOMESS
+cdrecord is not provided under its original name by Debian anymore.
+See #377109 in the BTS of Debian for more details.
+
+Please use the wodim binary instead
+EOMESS
+ return 1
+ }
+ fi
+fi
+
+# get_tw_cli has been renamed into get_3ware
+if check_com -c get_3ware ; then
+ get_tw_cli() {
+ echo 'Warning: get_tw_cli has been renamed into get_3ware. Invoking get_3ware for you.'>&2
+ get_3ware
+ }
+fi
+
+# I hate lacking backward compatibility, so provide an alternative therefore
+if ! check_com -c apache2-ssl-certificate ; then
+
+ apache2-ssl-certificate() {
+
+ print 'Debian does not ship apache2-ssl-certificate anymore (see #398520). :('
+ print 'You might want to take a look at Debian the package ssl-cert as well.'
+ print 'To generate a certificate for use with apache2 follow the instructions:'
+
+ echo '
+
+export RANDFILE=/dev/random
+mkdir /etc/apache2/ssl/
+openssl req $@ -new -x509 -days 365 -nodes -out /etc/apache2/ssl/apache.pem -keyout /etc/apache2/ssl/apache.pem
+chmod 600 /etc/apache2/ssl/apache.pem
+
+Run "grml-tips ssl-certificate" if you need further instructions.
+'
+ }
+fi
+
+# Use hard limits, except for a smaller stack and no core dumps
+unlimit
+is425 && limit stack 8192
+isgrmlcd && limit core 0 # important for a live-cd-system
+limit -s
+
+# completion system
+
+# called later (via is4 && grmlcomp)
+# note: use 'zstyle' for getting current settings
+# press ^Xh (control-x h) for getting tags in context; ^X? (control-x ?) to run complete_debug with trace output
+grmlcomp() {
+ # TODO: This could use some additional information
+
+ # allow one error for every three characters typed in approximate completer
+ zstyle ':completion:*:approximate:' max-errors 'reply=( $((($#PREFIX+$#SUFFIX)/3 )) numeric )'
+
+ # don't complete backup files as executables
+ zstyle ':completion:*:complete:-command-::commands' ignored-patterns '(aptitude-*|*\~)'
+
+ # start menu completion only if it could find no unambiguous initial string
+ zstyle ':completion:*:correct:*' insert-unambiguous true
+ zstyle ':completion:*:corrections' format $'%{\e[0;31m%}%d (errors: %e)%{\e[0m%}'
+ zstyle ':completion:*:correct:*' original true
+
+ # activate color-completion
+ zstyle ':completion:*:default' list-colors ${(s.:.)LS_COLORS}
+
+ # format on completion
+ zstyle ':completion:*:descriptions' format $'%{\e[0;31m%}completing %B%d%b%{\e[0m%}'
+
+ # automatically complete 'cd -<tab>' and 'cd -<ctrl-d>' with menu
+ # zstyle ':completion:*:*:cd:*:directory-stack' menu yes select
+
+ # insert all expansions for expand completer
+ zstyle ':completion:*:expand:*' tag-order all-expansions
+ zstyle ':completion:*:history-words' list false
+
+ # activate menu
+ zstyle ':completion:*:history-words' menu yes
+
+ # ignore duplicate entries
+ zstyle ':completion:*:history-words' remove-all-dups yes
+ zstyle ':completion:*:history-words' stop yes
+
+ # match uppercase from lowercase
+ zstyle ':completion:*' matcher-list 'm:{a-z}={A-Z}'
+
+ # separate matches into groups
+ zstyle ':completion:*:matches' group 'yes'
+ zstyle ':completion:*' group-name ''
+
+ if [[ "$NOMENU" -eq 0 ]] ; then
+ # if there are more than 5 options allow selecting from a menu
+ zstyle ':completion:*' menu select=5
+ else
+ # don't use any menus at all
+ setopt no_auto_menu
+ fi
+
+ zstyle ':completion:*:messages' format '%d'
+ zstyle ':completion:*:options' auto-description '%d'
+
+ # describe options in full
+ zstyle ':completion:*:options' description 'yes'
+
+ # on processes completion complete all user processes
+ zstyle ':completion:*:processes' command 'ps -au$USER'
+
+ # offer indexes before parameters in subscripts
+ zstyle ':completion:*:*:-subscript-:*' tag-order indexes parameters
+
+ # provide verbose completion information
+ zstyle ':completion:*' verbose true
+
+ # recent (as of Dec 2007) zsh versions are able to provide descriptions
+ # for commands (read: 1st word in the line) that it will list for the user
+ # to choose from. The following disables that, because it's not exactly fast.
+ zstyle ':completion:*:-command-:*:' verbose false
+
+ # set format for warnings
+ zstyle ':completion:*:warnings' format $'%{\e[0;31m%}No matches for:%{\e[0m%} %d'
+
+ # define files to ignore for zcompile
+ zstyle ':completion:*:*:zcompile:*' ignored-patterns '(*~|*.zwc)'
+ zstyle ':completion:correct:' prompt 'correct to: %e'
+
+ # Ignore completion functions for commands you don't have:
+ zstyle ':completion::(^approximate*):*:functions' ignored-patterns '_*'
+
+ # Provide more processes in completion of programs like killall:
+ zstyle ':completion:*:processes-names' command 'ps c -u ${USER} -o command | uniq'
+
+ # complete manual by their section
+ zstyle ':completion:*:manuals' separate-sections true
+ zstyle ':completion:*:manuals.*' insert-sections true
+ zstyle ':completion:*:man:*' menu yes select
+
+ # provide .. as a completion
+ zstyle ':completion:*' special-dirs ..
+
+ # run rehash on completion so new installed program are found automatically:
+ _force_rehash() {
+ (( CURRENT == 1 )) && rehash
+ return 1
+ }
+
+ ## correction
+ # some people don't like the automatic correction - so run 'NOCOR=1 zsh' to deactivate it
+ if [[ "$NOCOR" -gt 0 ]] ; then
+ zstyle ':completion:*' completer _oldlist _expand _force_rehash _complete _files _ignored
+ setopt nocorrect
+ else
+ # try to be smart about when to use what completer...
+ setopt correct
+ zstyle -e ':completion:*' completer '
+ if [[ $_last_try != "$HISTNO$BUFFER$CURSOR" ]] ; then
+ _last_try="$HISTNO$BUFFER$CURSOR"
+ reply=(_complete _match _ignored _prefix _files)
+ else
+ if [[ $words[1] == (rm|mv) ]] ; then
+ reply=(_complete _files)
+ else
+ reply=(_oldlist _expand _force_rehash _complete _ignored _correct _approximate _files)
+ fi
+ fi'
+ fi
+
+ # command for process lists, the local web server details and host completion
+ zstyle ':completion:*:urls' local 'www' '/var/www/' 'public_html'
+
+ # caching
+ [[ -d $ZSHDIR/cache ]] && zstyle ':completion:*' use-cache yes && \
+ zstyle ':completion::complete:*' cache-path $ZSHDIR/cache/
+
+ # host completion
+ if is42 ; then
+ [[ -r ~/.ssh/known_hosts ]] && _ssh_hosts=(${${${${(f)"$(<$HOME/.ssh/known_hosts)"}:#[\|]*}%%\ *}%%,*}) || _ssh_hosts=()
+ [[ -r /etc/hosts ]] && : ${(A)_etc_hosts:=${(s: :)${(ps:\t:)${${(f)~~"$(</etc/hosts)"}%%\#*}##[:blank:]#[^[:blank:]]#}}} || _etc_hosts=()
+ else
+ _ssh_hosts=()
+ _etc_hosts=()
+ fi
+ hosts=(
+ $(hostname)
+ "$_ssh_hosts[@]"
+ "$_etc_hosts[@]"
+ grml.org
+ localhost
+ )
+ zstyle ':completion:*:hosts' hosts $hosts
+ # TODO: so, why is this here?
+ # zstyle '*' hosts $hosts
+
+ # use generic completion system for programs not yet defined; (_gnu_generic works
+ # with commands that provide a --help option with "standard" gnu-like output.)
+ for compcom in cp deborphan df feh fetchipac head hnb ipacsum mv \
+ pal stow tail uname ; do
+ [[ -z ${_comps[$compcom]} ]] && compdef _gnu_generic ${compcom}
+ done; unset compcom
+
+ # see upgrade function in this file
+ compdef _hosts upgrade
+}
+
+# grmlstuff
+grmlstuff() {
+# people should use 'grml-x'!
+ if check_com -c 915resolution; then
+ 855resolution() {
+ echo "Please use 915resolution as resolution modifying tool for Intel \
+graphic chipset."
+ return -1
+ }
+ fi
+
+ #a1# Output version of running grml
+ alias grml-version='cat /etc/grml_version'
+
+ if check_com -c rebuildfstab ; then
+ #a1# Rebuild /etc/fstab
+ alias grml-rebuildfstab='rebuildfstab -v -r -config'
+ fi
+
+ if check_com -c grml-debootstrap ; then
+ debian2hd() {
+ echo "Installing debian to harddisk is possible by using grml-debootstrap."
+ return 1
+ }
+ fi
+}
+
+# now run the functions
+isgrml && checkhome
+is4 && isgrml && grmlstuff
+is4 && grmlcomp
+
+# keephack
+is4 && xsource "/etc/zsh/keephack"
+
+# wonderful idea of using "e" glob qualifier by Peter Stephenson
+# You use it as follows:
+# $ NTREF=/reference/file
+# $ ls -l *(e:nt:)
+# This lists all the files in the current directory newer than the reference file.
+# You can also specify the reference file inline; note quotes:
+# $ ls -l *(e:'nt ~/.zshenv':)
+is4 && nt() {
+ if [[ -n $1 ]] ; then
+ local NTREF=${~1}
+ fi
+ [[ $REPLY -nt $NTREF ]]
+}
+
+# shell functions
+
+#f1# Provide csh compatibility
+setenv() { typeset -x "${1}${1:+=}${(@)argv[2,$#]}" } # csh compatibility
+
+#f1# Reload an autoloadable function
+freload() { while (( $# )); do; unfunction $1; autoload -U $1; shift; done }
+compdef _functions freload
+
+#f1# List symlinks in detail (more detailed version of 'readlink -f' and 'whence -s')
+sll() {
+ [[ -z "$1" ]] && printf 'Usage: %s <file(s)>\n' "$0" && return 1
+ for file in "$@" ; do
+ while [[ -h "$file" ]] ; do
+ ls -l $file
+ file=$(readlink "$file")
+ done
+ done
+}
+
+# fast manual access
+if check_com qma ; then
+ #f1# View the zsh manual
+ manzsh() { qma zshall "$1" }
+ compdef _man qma
+else
+ manzsh() { /usr/bin/man zshall | vim -c "se ft=man| se hlsearch" +/"$1" - ; }
+fi
+
+# TODO: Is it supported to use pager settings like this?
+# PAGER='less -Mr' - If so, the use of $PAGER here needs fixing
+# with respect to wordsplitting. (ie. ${=PAGER})
+if check_com -c $PAGER ; then
+ #f1# View Debian's changelog of a given package
+ dchange() {
+ emulate -L zsh
+ if [[ -r /usr/share/doc/$1/changelog.Debian.gz ]] ; then
+ $PAGER /usr/share/doc/$1/changelog.Debian.gz
+ elif [[ -r /usr/share/doc/$1/changelog.gz ]] ; then
+ $PAGER /usr/share/doc/$1/changelog.gz
+ else
+ if check_com -c aptitude ; then
+ echo "No changelog for package $1 found, using aptitude to retrieve it."
+ if isgrml ; then
+ aptitude -t unstable changelog $1
+ else
+ aptitude changelog $1
+ fi
+ else
+ echo "No changelog for package $1 found, sorry."
+ return 1
+ fi
+ fi
+ }
+ _dchange() { _files -W /usr/share/doc -/ }
+ compdef _dchange dchange
+
+ #f1# View Debian's NEWS of a given package
+ dnews() {
+ emulate -L zsh
+ if [[ -r /usr/share/doc/$1/NEWS.Debian.gz ]] ; then
+ $PAGER /usr/share/doc/$1/NEWS.Debian.gz
+ else
+ if [[ -r /usr/share/doc/$1/NEWS.gz ]] ; then
+ $PAGER /usr/share/doc/$1/NEWS.gz
+ else
+ echo "No NEWS file for package $1 found, sorry."
+ return 1
+ fi
+ fi
+ }
+ _dnews() { _files -W /usr/share/doc -/ }
+ compdef _dnews dnews
+
+ #f1# View upstream's changelog of a given package
+ uchange() {
+ emulate -L zsh
+ if [[ -r /usr/share/doc/$1/changelog.gz ]] ; then
+ $PAGER /usr/share/doc/$1/changelog.gz
+ else
+ echo "No changelog for package $1 found, sorry."
+ return 1
+ fi
+ }
+ _uchange() { _files -W /usr/share/doc -/ }
+ compdef _uchange uchange
+fi
+
+# zsh profiling
+profile() {
+ ZSH_PROFILE_RC=1 $SHELL "$@"
+}
+
+#f1# Edit an alias via zle
+edalias() {
+ [[ -z "$1" ]] && { echo "Usage: edalias <alias_to_edit>" ; return 1 } || vared aliases'[$1]' ;
+}
+compdef _aliases edalias
+
+#f1# Edit a function via zle
+edfunc() {
+ [[ -z "$1" ]] && { echo "Usage: edfunc <function_to_edit>" ; return 1 } || zed -f "$1" ;
+}
+compdef _functions edfunc
# use it e.g. via 'Restart apache2'
- if [ -d /etc/init.d ] ; then
- for i in Start Restart Stop Force-Reload Reload ; do
- eval "$i() { $SUDO /etc/init.d/\$1 ${i:l} \$2 ; }"
- done
- # now the completion for this:
- compctl -g "$(echo /etc/init.d/*(:t))" Start Restart Stop Force-Reload Reload
- fi
-
-# provide useful information on globbing
- H-Glob() {
- echo -e "
- / directories
- . plain files
- @ symbolic links
- = sockets
- p named pipes (FIFOs)
- * executable plain files (0100)
- % device files (character or block special)
- %b block special files
- %c character special files
- r owner-readable files (0400)
- w owner-writable files (0200)
- x owner-executable files (0100)
- A group-readable files (0040)
- I group-writable files (0020)
- E group-executable files (0010)
- R world-readable files (0004)
- W world-writable files (0002)
- X world-executable files (0001)
- s setuid files (04000)
- S setgid files (02000)
- t files with the sticky bit (01000)
-
- print *(m-1) # Files modified up to a day ago
- print *(a1) # Files accessed a day ago
- print *(@) # Just symlinks
- print *(Lk+50) # Files bigger than 50 kilobytes
- print *(Lk-50) # Files smaller than 50 kilobytes
- print **/*.c # All *.c files recursively starting in \$PWD
- print **/*.c~file.c # Same as above, but excluding 'file.c'
- print (foo|bar).* # Files starting with 'foo' or 'bar'
- print *~*.* # All Files that do not contain a dot
- chmod 644 *(.^x) # make all plain non-executable files publically readable
- print -l *(.c|.h) # Lists *.c and *.h
- print **/*(g:users:) # Recursively match all files that are owned by group 'users'
- echo /proc/*/cwd(:h:t:s/self//) # Analogous to >ps ax | awk '{print $1}'<"
- }
- alias help-zshglob=H-Glob
-
- type -p qma &>/dev/null && alias ?='qma zshall'
-
- # grep for running process, like: 'any vim'
- any() {
- if [ -z "$1" ] ; then
- echo "any - grep for process(es) by keyword" >&2
- echo "Usage: any <keyword>" >&2 ; return 1
- else
- local STRING=$1
- local LENGTH=$(expr length $STRING)
- local FIRSCHAR=$(echo $(expr substr $STRING 1 1))
- local REST=$(echo $(expr substr $STRING 2 $LENGTH))
- ps xauwww| grep "[$FIRSCHAR]$REST"
- fi
- }
-
- # After resuming from suspend, system is paging heavilly, leading to very bad interactivity.
- # taken from $LINUX-KERNELSOURCE/Documentation/power/swsusp.txt
- [ -r /proc/1/maps ] && deswap() {
- print 'Reading /proc/[0-9]*/maps and sending output to /dev/null, this might take a while.'
- cat $(sed -ne 's:.* /:/:p' /proc/[0-9]*/maps | sort -u | grep -v '^/dev/') > /dev/null
- print 'Finished, running "swapoff -a; swapon -a" may also be useful.'
- }
-
- # print hex value of a number
- hex() {
- [ -n "$1" ] && printf "%x\n" $1 || { print 'Usage: hex <number-to-convert>' ; return 1 }
- }
-
- # calculate (or eval at all ;-)) with perl => p[erl-]eval
- # hint: also take a look at zcalc -> 'autoload zcalc' -> 'man zshmodules | less -p MATHFUNC'
- peval() {
- [ -n "$1" ] && CALC="$*" || print "Usage: calc [expression]"
+#m# f6 Start() \kbd{/etc/init.d/\em{process}}\quad\kbd{start}
+#m# f6 Restart() \kbd{/etc/init.d/\em{process}}\quad\kbd{restart}
+#m# f6 Stop() \kbd{/etc/init.d/\em{process}}\quad\kbd{stop}
+#m# f6 Reload() \kbd{/etc/init.d/\em{process}}\quad\kbd{reload}
+#m# f6 Force-Reload() \kbd{/etc/init.d/\em{process}}\quad\kbd{force-reload}
+if [[ -d /etc/init.d || -d /etc/service ]] ; then
+ __start_stop() {
+ local action_="${1:l}" # e.g Start/Stop/Restart
+ local service_="$2"
+ local param_="$3"
+
+ local service_target_="$(readlink /etc/init.d/$service_)"
+ if [[ $service_target_ == "/usr/bin/sv" ]]; then
+ # runit
+ case "${action_}" in
+ start) if [[ ! -e /etc/service/$service_ ]]; then
+ $SUDO ln -s "/etc/sv/$service_" "/etc/service/"
+ else
+ $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
+ fi ;;
+ # there is no reload in runits sysv emulation
+ reload) $SUDO "/etc/init.d/$service_" "force-reload" "$param_" ;;
+ *) $SUDO "/etc/init.d/$service_" "${action_}" "$param_" ;;
+ esac
+ else
+ # sysvinit
+ $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
+ fi
+ }
+
+ _grmlinitd() {
+ local -a scripts
+ scripts=( /etc/init.d/*(x:t) )
+ _describe "service startup script" scripts
+ }
+
+ for i in Start Restart Stop Force-Reload Reload ; do
+ eval "$i() { __start_stop $i \"\$1\" \"\$2\" ; }"
+ compdef _grmlinitd $i
+ done
+fi
+
+#f1# Provides useful information on globbing
+H-Glob() {
+ echo -e "
+ / directories
+ . plain files
+ @ symbolic links
+ = sockets
+ p named pipes (FIFOs)
+ * executable plain files (0100)
+ % device files (character or block special)
+ %b block special files
+ %c character special files
+ r owner-readable files (0400)
+ w owner-writable files (0200)
+ x owner-executable files (0100)
+ A group-readable files (0040)
+ I group-writable files (0020)
+ E group-executable files (0010)
+ R world-readable files (0004)
+ W world-writable files (0002)
+ X world-executable files (0001)
+ s setuid files (04000)
+ S setgid files (02000)
+ t files with the sticky bit (01000)
+
+ print *(m-1) # Files modified up to a day ago
+ print *(a1) # Files accessed a day ago
+ print *(@) # Just symlinks
+ print *(Lk+50) # Files bigger than 50 kilobytes
+ print *(Lk-50) # Files smaller than 50 kilobytes
+ print **/*.c # All *.c files recursively starting in \$PWD
+ print **/*.c~file.c # Same as above, but excluding 'file.c'
+ print (foo|bar).* # Files starting with 'foo' or 'bar'
+ print *~*.* # All Files that do not contain a dot
+ chmod 644 *(.^x) # make all plain non-executable files publically readable
+ print -l *(.c|.h) # Lists *.c and *.h
+ print **/*(g:users:) # Recursively match all files that are owned by group 'users'
+ echo /proc/*/cwd(:h:t:s/self//) # Analogous to >ps ax | awk '{print $1}'<"
+}
+alias help-zshglob=H-Glob
+
+#v1# set number of lines to display per page
+HELP_LINES_PER_PAGE=20
+#v1# set location of help-zle cache file
+HELP_ZLE_CACHE_FILE=~/.cache/zsh_help_zle_lines.zsh
+#f1# helper function for help-zle, actually generates the help text
+help_zle_parse_keybindings()
+{
+ emulate -L zsh
+ setopt extendedglob
+ unsetopt ksharrays #indexing starts at 1
+
+ #v1# choose files that help-zle will parse for keybindings
+ ((${+HELPZLE_KEYBINDING_FILES})) || HELPZLE_KEYBINDING_FILES=( /etc/zsh/zshrc ~/.zshrc.pre ~/.zshrc ~/.zshrc.local )
+
+ if [[ -r $HELP_ZLE_CACHE_FILE ]]; then
+ local load_cache=0
+ for f ($KEYBINDING_FILES) [[ $f -nt $HELP_ZLE_CACHE_FILE ]] && load_cache=1
+ [[ $load_cache -eq 0 ]] && . $HELP_ZLE_CACHE_FILE && return
+ fi
+
+ #fill with default keybindings, possibly to be overwriten in a file later
+ #Note that due to zsh inconsistency on escaping assoc array keys, we encase the key in '' which we will remove later
+ local -A help_zle_keybindings
+ help_zle_keybindings['<Ctrl>@']="set MARK"
+ help_zle_keybindings['<Ctrl>X<Ctrl>J']="vi-join lines"
+ help_zle_keybindings['<Ctrl>X<Ctrl>B']="jump to matching brace"
+ help_zle_keybindings['<Ctrl>X<Ctrl>U']="undo"
+ help_zle_keybindings['<Ctrl>_']="undo"
+ help_zle_keybindings['<Ctrl>X<Ctrl>F<c>']="find <c> in cmdline"
+ help_zle_keybindings['<Ctrl>A']="goto beginning of line"
+ help_zle_keybindings['<Ctrl>E']="goto end of line"
+ help_zle_keybindings['<Ctrl>t']="transpose charaters"
+ help_zle_keybindings['<Alt>T']="transpose words"
+ help_zle_keybindings['<Alt>s']="spellcheck word"
+ help_zle_keybindings['<Ctrl>K']="backward kill buffer"
+ help_zle_keybindings['<Ctrl>U']="forward kill buffer"
+ help_zle_keybindings['<Ctrl>y']="insert previously killed word/string"
+ help_zle_keybindings["<Alt>'"]="quote line"
+ help_zle_keybindings['<Alt>"']="quote from mark to cursor"
+ help_zle_keybindings['<Alt><arg>']="repeat next cmd/char <arg> times (<Alt>-<Alt>1<Alt>0a -> -10 times 'a')"
+ help_zle_keybindings['<Alt>U']="make next word Uppercase"
+ help_zle_keybindings['<Alt>l']="make next word lowercase"
+ help_zle_keybindings['<Ctrl>Xd']="preview expansion under cursor"
+ help_zle_keybindings['<Alt>q']="push current CL into background, freeing it. Restore on next CL"
+ help_zle_keybindings['<Alt>.']="insert (and interate through) last word from prev CLs"
+ help_zle_keybindings['<Alt>,']="complete word from newer history (consecutive hits)"
+ help_zle_keybindings['<Alt>m']="repeat last typed word on current CL"
+ help_zle_keybindings['<Ctrl>V']="insert next keypress symbol literally (e.g. for bindkey)"
+ help_zle_keybindings['!!:n*<Tab>']="insert last n arguments of last command"
+ help_zle_keybindings['!!:n-<Tab>']="insert arguments n..N-2 of last command (e.g. mv s s d)"
+ help_zle_keybindings['<Alt>H']="run help on current command"
+
+ #init global variables
+ unset help_zle_lines help_zle_sln
+ typeset -g -a help_zle_lines
+ typeset -g help_zle_sln=1
+
+ local k v
+ local lastkeybind_desc contents #last description starting with #k# that we found
+ local num_lines_elapsed=0 #number of lines between last description and keybinding
+ #search config files in the order they a called (and thus the order in which they overwrite keybindings)
+ for f in $HELPZLE_KEYBINDING_FILES; do
+ [[ -r "$f" ]] || continue #not readable ? skip it
+ contents="$(<$f)"
+ for cline in "${(f)contents}"; do
+ #zsh pattern: matches lines like: #k# ..............
+ if [[ "$cline" == (#s)[[:space:]]#\#k\#[[:space:]]##(#b)(*)[[:space:]]#(#e) ]]; then
+ lastkeybind_desc="$match[*]"
+ num_lines_elapsed=0
+ #zsh pattern: matches lines that set a keybinding using bindkey or compdef -k
+ # ignores lines that are commentend out
+ # grabs first in '' or "" enclosed string with length between 1 and 6 characters
+ elif [[ "$cline" == [^#]#(bindkey|compdef -k)[[:space:]](*)(#b)(\"((?)(#c1,6))\"|\'((?)(#c1,6))\')(#B)(*) ]]; then
+ #description prevously found ? description not more than 2 lines away ? keybinding not empty ?
+ if [[ -n $lastkeybind_desc && $num_lines_elapsed -lt 2 && -n $match[1] ]]; then
+ #substitute keybinding string with something readable
+ k=${${${${${${${match[1]/\\e\^h/<Alt><BS>}/\\e\^\?/<Alt><BS>}/\\e\[5~/<PageUp>}/\\e\[6~/<PageDown>}//(\\e|\^\[)/<Alt>}//\^/<Ctrl>}/3~/<Alt><Del>}
+ #put keybinding in assoc array, possibly overwriting defaults or stuff found in earlier files
+ #Note that we are extracting the keybinding-string including the quotes (see Note at beginning)
+ help_zle_keybindings[${k}]=$lastkeybind_desc
+ fi
+ lastkeybind_desc=""
+ else
+ ((num_lines_elapsed++))
+ fi
+ done
+ done
+ unset contents
+ #calculate length of keybinding column
+ local kstrlen=0
+ for k (${(k)help_zle_keybindings[@]}) ((kstrlen < ${#k})) && kstrlen=${#k}
+ #convert the assoc array into preformated lines, which we are able to sort
+ for k v in ${(kv)help_zle_keybindings[@]}; do
+ #pad keybinding-string to kstrlen chars and remove outermost characters (i.e. the quotes)
+ help_zle_lines+=("${(r:kstrlen:)k[2,-2]}${v}")
+ done
+ #sort lines alphabetically
+ help_zle_lines=("${(i)help_zle_lines[@]}")
+ [[ -d ${HELP_ZLE_CACHE_FILE:h} ]] || mkdir -p "${HELP_ZLE_CACHE_FILE:h}"
+ echo "help_zle_lines=(${(q)help_zle_lines[@]})" >| $HELP_ZLE_CACHE_FILE
+ zcompile $HELP_ZLE_CACHE_FILE
+}
+typeset -g help_zle_sln
+typeset -g -a help_zle_lines
+
+#f1# Provides (partially autogenerated) help on keybindings and the zsh line editor
+help-zle()
+{
+ emulate -L zsh
+ unsetopt ksharrays #indexing starts at 1
+ #help lines already generated ? no ? then do it
+ [[ ${+functions[help_zle_parse_keybindings]} -eq 1 ]] && {help_zle_parse_keybindings && unfunction help_zle_parse_keybindings}
+ #already displayed all lines ? go back to the start
+ [[ $help_zle_sln -gt ${#help_zle_lines} ]] && help_zle_sln=1
+ local sln=$help_zle_sln
+ #note that help_zle_sln is a global var, meaning we remember the last page we viewed
+ help_zle_sln=$((help_zle_sln + HELP_LINES_PER_PAGE))
+ zle -M "${(F)help_zle_lines[sln,help_zle_sln-1]}"
+}
+#k# display help for keybindings and ZLE (cycle pages with consecutive use)
+zle -N help-zle && bindkey '^Xz' help-zle
+
+check_com -c qma && alias ?='qma zshall'
+
+# grep for running process, like: 'any vim'
+any() {
+ emulate -L zsh
+ unsetopt KSH_ARRAYS
+ if [[ -z "$1" ]] ; then
+ echo "any - grep for process(es) by keyword" >&2
+ echo "Usage: any <keyword>" >&2 ; return 1
+ else
+ ps xauwww | grep -i --color=auto "[${1[1]}]${1[2,-1]}"
+ fi
+}
+
+
+# After resuming from suspend, system is paging heavily, leading to very bad interactivity.
+# taken from $LINUX-KERNELSOURCE/Documentation/power/swsusp.txt
+[[ -r /proc/1/maps ]] && \
+deswap() {
+ print 'Reading /proc/[0-9]*/maps and sending output to /dev/null, this might take a while.'
+ cat $(sed -ne 's:.* /:/:p' /proc/[0-9]*/maps | sort -u | grep -v '^/dev/') > /dev/null
+ print 'Finished, running "swapoff -a; swapon -a" may also be useful.'
+}
+
+# print hex value of a number
+hex() {
+ emulate -L zsh
+ [[ -n "$1" ]] && printf "%x\n" $1 || { print 'Usage: hex <number-to-convert>' ; return 1 }
+}
+
+# calculate (or eval at all ;-)) with perl => p[erl-]eval
+# hint: also take a look at zcalc -> 'autoload zcalc' -> 'man zshmodules | less -p MATHFUNC'
+peval() {
+ [[ -n "$1" ]] && CALC="$*" || print "Usage: calc [expression]"
perl -e "print eval($CALC),\"\n\";"
- }
- functions peval &>/dev/null && alias calc=peval
-
- # Switching shell safely and efficiently? http://www.zsh.org/mla/workers/2001/msg02410.html
- # bash() {
- # NO_SWITCH="yes" command bash "$@"
- # }
- # restart () {
- # exec $SHELL $SHELL_ARGS "$@"
- # }
-
-# }}}
-
-# log out? set timeout in seconds {{{
-# TMOUT=1800
-# do not log out in some specific terminals:
-# if [[ "${TERM}" == ([Exa]term*|rxvt|dtterm|screen*) ]]; then
-# unset TMOUT
-# fi
-# }}}
-
-# {{{ make sure our environment is clean regarding colors
- for color in BLUE RED GREEN CYAN WHITE ; unset $color
-# }}}
-
-# source another config file if present {{{
- if [ -r /etc/zsh/zshrc.local ]; then
- source /etc/zsh/zshrc.local
- fi
-# }}}
+}
+functions peval &>/dev/null && alias calc=peval
+
+# just press 'asdf' keys to toggle between dvorak and us keyboard layout
+aoeu() {
+ echo -n 'Switching to us keyboard layout: '
+ [[ -z "$DISPLAY" ]] && $SUDO loadkeys us &>/dev/null || setxkbmap us &>/dev/null
+ echo 'Done'
+}
+asdf() {
+ echo -n 'Switching to dvorak keyboard layout: '
+ [[ -z "$DISPLAY" ]] && $SUDO loadkeys dvorak &>/dev/null || setxkbmap dvorak &>/dev/null
+ echo 'Done'
+}
+# just press 'asdf' key to toggle from neon layout to us keyboard layout
+uiae() {
+ echo -n 'Switching to us keyboard layout: '
+ setxkbmap us && echo 'Done' || echo 'Failed'
+}
+
+# set up an ipv6 tunnel
+ipv6-tunnel() {
+ emulate -L zsh
+ case $1 in
+ start)
+ if ifconfig sit1 2>/dev/null | grep -q 'inet6 addr: 2002:.*:1::1' ; then
+ print 'ipv6 tunnel already set up, nothing to be done.'
+ print 'execute: "ifconfig sit1 down ; ifconfig sit0 down" to remove ipv6-tunnel.' ; return 1
+ else
+ [[ -n "$PUBLIC_IP" ]] || \
+ local PUBLIC_IP=$(ifconfig $(route -n | awk '/^0\.0\.0\.0/{print $8; exit}') | \
+ awk '/inet addr:/ {print $2}' | tr -d 'addr:')
+
+ [[ -n "$PUBLIC_IP" ]] || { print 'No $PUBLIC_IP set and could not determine default one.' ; return 1 }
+ local IPV6ADDR=$(printf "2002:%02x%02x:%02x%02x:1::1" $(print ${PUBLIC_IP//./ }))
+ print -n "Setting up ipv6 tunnel $IPV6ADDR via ${PUBLIC_IP}: "
+ ifconfig sit0 tunnel ::192.88.99.1 up
+ ifconfig sit1 add "$IPV6ADDR" && print done || print failed
+ fi
+ ;;
+ status)
+ if ifconfig sit1 2>/dev/null | grep -q 'inet6 addr: 2002:.*:1::1' ; then
+ print 'ipv6 tunnel available' ; return 0
+ else
+ print 'ipv6 tunnel not available' ; return 1
+ fi
+ ;;
+ stop)
+ if ifconfig sit1 2>/dev/null | grep -q 'inet6 addr: 2002:.*:1::1' ; then
+ print -n 'Stopping ipv6 tunnel (sit0 + sit1): '
+ ifconfig sit1 down ; ifconfig sit0 down && print done || print failed
+ else
+ print 'No ipv6 tunnel found, nothing to be done.' ; return 1
+ fi
+ ;;
+ *)
+ print "Usage: ipv6-tunnel [start|stop|status]">&2 ; return 1
+ ;;
+ esac
+}
+
+# run dhclient for wireless device
+iwclient() {
+ sudo dhclient "$(wavemon -d | awk '/device/{print $3}')"
+}
+
+# spawn a minimally set up mksh - useful if you want to umount /usr/.
+minimal-shell() {
+ emulate -L zsh
+ local shell="/bin/mksh"
+
+ if [[ ! -x ${shell} ]]; then
+ printf '`%s'\'' not available, giving up.\n' ${shell} >&2
+ return 1
+ fi
+
+ exec env -i ENV="/etc/minimal-shellrc" HOME="$HOME" TERM="$TERM" ${shell}
+}
+
+# a wrapper for vim, that deals with title setting
+# VIM_OPTIONS
+# set this array to a set of options to vim you always want
+# to have set when calling vim (in .zshrc.local), like:
+# VIM_OPTIONS=( -p )
+# This will cause vim to send every file given on the
+# commandline to be send to it's own tab (needs vim7).
+vim() {
+ VIM_PLEASE_SET_TITLE='yes' command vim ${VIM_OPTIONS} "$@"
+}
+
+# make a backup of a file
+bk() {
+ cp -a "$1" "${1}_$(date --iso-8601=seconds)"
+}
+
+#f1# grep for patterns in grml's zsh setup
+zg() {
+ LANG=C perl -e '
+
+sub usage {
+ print "usage: zg -[anr] <pattern>\n";
+ print " Search for patterns in grml'\''s zshrc.\n";
+ print " zg takes no or exactly one option plus a non empty pattern.\n\n";
+ print " options:\n";
+ print " -- no options (use if your pattern starts in with a dash.\n";
+ print " -a search for the pattern in all code regions\n";
+ print " -n search for the pattern in non-root code only\n";
+ print " -r search in code for everyone (also root) only\n\n";
+ print " The default is -a for non-root users and -r for root.\n\n";
+ print " If you installed the zshrc to a non-default locations (ie *NOT*\n";
+ print " in /etc/zsh/zshrc) do: export GRML_ZSHRC=\$HOME/.zshrc\n";
+ print " ...in case you copied the file to that location.\n\n";
+ exit 1;
+}
+
+if ($ENV{GRML_ZSHRC} ne "") {
+ $RC = $ENV{GRML_ZSHRC};
+} else {
+ $RC = "/etc/zsh/zshrc";
+}
+
+usage if ($#ARGV < 0 || $#ARGV > 1);
+if ($> == 0) { $mode = "allonly"; }
+else { $mode = "all"; }
+
+$opt = $ARGV[0];
+if ($opt eq "--") { shift; }
+elsif ($opt eq "-a") { $mode = "all"; shift; }
+elsif ($opt eq "-n") { $mode = "nonroot"; shift; }
+elsif ($opt eq "-r" ) { $mode = "allonly"; shift; }
+elsif ($opt =~ m/^-/ || $#ARGV > 0) { usage(); }
+
+$pattern = $ARGV[0];
+usage() if ($pattern eq "");
+
+open FH, "<$RC" or die "zg: Could not open $RC: $!\n";
+while ($line = <FH>) {
+ chomp $line;
+ if ($line =~ m/^#:grep:marker:for:mika:/) { $markerfound = 1; next; }
+ next if ($mode eq "nonroot" && markerfound == 0);
+ break if ($mode eq "allonly" && markerfound == 1);
+ print $line, "\n" if ($line =~ /$pattern/);
+}
+close FH;
+exit 0;
+
+ ' -- "$@"
+ return $?
+}
+
+ssl_hashes=( sha512 sha256 sha1 md5 )
+
+for sh in ${ssl_hashes}; do
+ eval 'ssl-cert-'${sh}'() {
+ emulate -L zsh
+ if [[ -z $1 ]] ; then
+ printf '\''usage: %s <file>\n'\'' "ssh-cert-'${sh}'"
+ return 1
+ fi
+ openssl x509 -noout -fingerprint -'${sh}' -in $1
+ }'
+done; unset sh
+
+ssl-cert-fingerprints() {
+ emulate -L zsh
+ local i
+ if [[ -z $1 ]] ; then
+ printf 'usage: ssl-cert-fingerprints <file>\n'
+ return 1
+ fi
+ for i in ${ssl_hashes}
+ do ssl-cert-$i $1;
+ done
+}
+
+ssl-cert-info() {
+ emulate -L zsh
+ if [[ -z $1 ]] ; then
+ printf 'usage: ssl-cert-info <file>\n'
+ return 1
+ fi
+ openssl x509 -noout -text -in $1
+ ssl-cert-fingerprints $1
+}
-# "persistent history" {{{
+# make sure our environment is clean regarding colors
+for color in BLUE RED GREEN CYAN YELLOW MAGENTA WHITE ; unset $color
+
+# "persistent history"
# just write important commands you always need to ~/.important_commands
- if [ -r ~/.important_commands ] ; then
- fc -R ~/.important_commands
- fi
-# }}}
+if [[ -r ~/.important_commands ]] ; then
+ fc -R ~/.important_commands
+fi
+
+# load the lookup subsystem if it's available on the system
+zrcautoload lookupinit && lookupinit
+
+#:grep:marker:for:mika: :-)
+### non-root (EUID != 0) code below
+###
+
+if (( GRML_ALWAYS_LOAD_ALL == 0 )) && (( $EUID == 0 )) ; then
+ zrclocal
+ return 0
+fi
+
+# variables
+
+# set terminal property (used e.g. by msgid-chooser)
+export COLORTERM="yes"
+
+#m# v QTDIR \kbd{/usr/share/qt[34]}\quad [for non-root only]
+[[ -d /usr/share/qt3 ]] && export QTDIR=/usr/share/qt3
+[[ -d /usr/share/qt4 ]] && export QTDIR=/usr/share/qt4
+
+# support running 'jikes *.java && jamvm HelloWorld' OOTB:
+#v# [for non-root only]
+[[ -f /usr/share/classpath/glibj.zip ]] && export JIKESPATH=/usr/share/classpath/glibj.zip
+
+# aliases
+
+# Xterm resizing-fu.
+# Based on http://svn.kitenet.net/trunk/home-full/.zshrc?rev=11710&view=log (by Joey Hess)
+alias hide='echo -en "\033]50;nil2\007"'
+alias tiny='echo -en "\033]50;-misc-fixed-medium-r-normal-*-*-80-*-*-c-*-iso8859-15\007"'
+alias small='echo -en "\033]50;6x10\007"'
+alias medium='echo -en "\033]50;-misc-fixed-medium-r-normal--13-120-75-75-c-80-iso8859-15\007"'
+alias default='echo -e "\033]50;-misc-fixed-medium-r-normal-*-*-140-*-*-c-*-iso8859-15\007"'
+alias large='echo -en "\033]50;-misc-fixed-medium-r-normal-*-*-150-*-*-c-*-iso8859-15\007"'
+alias huge='echo -en "\033]50;-misc-fixed-medium-r-normal-*-*-210-*-*-c-*-iso8859-15\007"'
+alias smartfont='echo -en "\033]50;-artwiz-smoothansi-*-*-*-*-*-*-*-*-*-*-*-*\007"'
+alias semifont='echo -en "\033]50;-misc-fixed-medium-r-semicondensed-*-*-120-*-*-*-*-iso8859-15\007"'
+
+# general
+#a2# Execute \kbd{du -sch}
+alias da='du -sch'
+#a2# Execute \kbd{jobs -l}
+alias j='jobs -l'
+
+# compile stuff
+#a2# Execute \kbd{./configure}
+alias CO="./configure"
+#a2# Execute \kbd{./configure --help}
+alias CH="./configure --help"
+
+# listing stuff
+#a2# Execute \kbd{ls -lSrah}
+alias dir="ls -lSrah"
+#a2# Only show dot-directories
+alias lad='ls -d .*(/)' # only show dot-directories
+#a2# Only show dot-files
+alias lsa='ls -a .*(.)' # only show dot-files
+#a2# Only files with setgid/setuid/sticky flag
+alias lss='ls -l *(s,S,t)' # only files with setgid/setuid/sticky flag
+#a2# Only show 1st ten symlinks
+alias lsl='ls -l *(@)' # only symlinks
+#a2# Display only executables
+alias lsx='ls -l *(*)' # only executables
+#a2# Display world-{readable,writable,executable} files
+alias lsw='ls -ld *(R,W,X.^ND/)' # world-{readable,writable,executable} files
+#a2# Display the ten biggest files
+alias lsbig="ls -flh *(.OL[1,10])" # display the biggest files
+#a2# Only show directories
+alias lsd='ls -d *(/)' # only show directories
+#a2# Only show empty directories
+alias lse='ls -d *(/^F)' # only show empty directories
+#a2# Display the ten newest files
+alias lsnew="ls -rtlh *(D.om[1,10])" # display the newest files
+#a2# Display the ten oldest files
+alias lsold="ls -rtlh *(D.Om[1,10])" # display the oldest files
+#a2# Display the ten smallest files
+alias lssmall="ls -Srl *(.oL[1,10])" # display the smallest files
+
+# chmod
+#a2# Execute \kbd{chmod 600}
+alias rw-='chmod 600'
+#a2# Execute \kbd{chmod 700}
+alias rwx='chmod 700'
+#m# a2 r-{}- Execute \kbd{chmod 644}
+alias r--='chmod 644'
+#a2# Execute \kbd{chmod 755}
+alias r-x='chmod 755'
+
+# some useful aliases
+#a2# Execute \kbd{mkdir -p}
+alias md='mkdir -p'
+#a2# Remove current empty directory. Execute \kbd{cd ..; rmdir $OLDCWD}
+alias rmcdir='cd ..; rmdir $OLDPWD || cd $OLDPWD'
+
+# console stuff
+#a2# Execute \kbd{mplayer -vo fbdev}
+alias cmplayer='mplayer -vo fbdev'
+#a2# Execute \kbd{mplayer -vo fbdev -fs -zoom}
+alias fbmplayer='mplayer -vo fbdev -fs -zoom'
+#a2# Execute \kbd{links2 -driver fb}
+alias fblinks='links2 -driver fb'
+
+#a2# ssh with StrictHostKeyChecking=no \\&\quad and UserKnownHostsFile unset
+alias insecssh='ssh -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
+alias insecscp='scp -o "StrictHostKeyChecking=no" -o "UserKnownHostsFile=/dev/null"'
+
+# simple webserver
+check_com -c python && alias http="python -m SimpleHTTPServer"
+
+# Use 'g' instead of 'git':
+check_com g || alias g='git'
+
+# work around non utf8 capable software in utf environment via $LANG and luit
+if check_com isutfenv && check_com luit ; then
+ if check_com -c mrxvt ; then
+ isutfenv && [[ -n "$LANG" ]] && \
+ alias mrxvt="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit mrxvt"
+ fi
+
+ if check_com -c aterm ; then
+ isutfenv && [[ -n "$LANG" ]] && \
+ alias aterm="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit aterm"
+ fi
+
+ if check_com -c centericq ; then
+ isutfenv && [[ -n "$LANG" ]] && \
+ alias centericq="LANG=${LANG/(#b)(*)[.@]*/$match[1].iso885915} luit centericq"
+ fi
+fi
+
+# useful functions
+
+# searching
+#f4# Search for newspostings from authors
+agoogle() { ${=BROWSER} "http://groups.google.com/groups?as_uauthors=$*" ; }
+#f4# Search Debian Bug Tracking System
+debbug() {
+ emulate -L zsh
+ setopt extendedglob
+ if [[ $# -eq 1 ]]; then
+ case "$1" in
+ ([0-9]##)
+ ${=BROWSER} "http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=$1"
+ ;;
+ (*@*)
+ ${=BROWSER} "http://bugs.debian.org/cgi-bin/pkgreport.cgi?submitter=$1"
+ ;;
+ (*)
+ ${=BROWSER} "http://bugs.debian.org/$*"
+ ;;
+ esac
+ else
+ print "$0 needs one argument"
+ return 1
+ fi
+}
+#f4# Search Debian Bug Tracking System in mbox format
+debbugm() {
+ emulate -L zsh
+ bts show --mbox $1
+}
+#f4# Search DMOZ
+dmoz() {
+ emulate -L zsh
+ ${=BROWSER} http://search.dmoz.org/cgi-bin/search\?search=${1// /_}
+}
+#f4# Search German Wiktionary
+dwicti() {
+ emulate -L zsh
+ ${=BROWSER} http://de.wiktionary.org/wiki/${(C)1// /_}
+}
+#f4# Search English Wiktionary
+ewicti() {
+ emulate -L zsh
+ ${=BROWSER} http://en.wiktionary.org/wiki/${(C)1// /_}
+}
+#f4# Search Google Groups
+ggogle() {
+ emulate -L zsh
+ ${=BROWSER} "http://groups.google.com/groups?q=$*"
+}
+#f4# Search Google
+google() {
+ emulate -L zsh
+ ${=BROWSER} "http://www.google.com/search?&num=100&q=$*"
+}
+#f4# Search Google Groups for MsgID
+mggogle() {
+ emulate -L zsh
+ ${=BROWSER} "http://groups.google.com/groups?selm=$*"
+}
+#f4# Search Netcraft
+netcraft(){
+ emulate -L zsh
+ ${=BROWSER} "http://toolbar.netcraft.com/site_report?url=$1"
+}
+#f4# Use German Wikipedia's full text search
+swiki() {
+ emulate -L zsh
+ ${=BROWSER} http://de.wikipedia.org/wiki/Spezial:Search/${(C)1}
+}
+#f4# search \kbd{dict.leo.org}
+oleo() {
+ emulate -L zsh
+ ${=BROWSER} "http://dict.leo.org/?search=$*"
+}
+#f4# Search German Wikipedia
+wikide() {
+ emulate -L zsh
+ ${=BROWSER} http://de.wikipedia.org/wiki/"${(C)*}"
+}
+#f4# Search English Wikipedia
+wikien() {
+ emulate -L zsh
+ ${=BROWSER} http://en.wikipedia.org/wiki/"${(C)*}"
+}
+#f4# Search official debs
+wodeb() {
+ emulate -L zsh
+ ${=BROWSER} "http://packages.debian.org/search?keywords=$1&searchon=contents&suite=${2:=unstable}§ion=all"
+}
+
+#m# f4 gex() Exact search via Google
+check_com google && gex () {
+ google "\"[ $1]\" $*"
+}
+
+# misc
+#f5# Backup \kbd{file {\rm to} file\_timestamp}
+bk() {
+ emulate -L zsh
+ cp -b $1 $1_`date --iso-8601=m`
+}
+#f5# Copied diff
+cdiff() {
+ emulate -L zsh
+ diff -crd "$@" | egrep -v "^Only in |^Binary files "
+}
+#f5# cd to directoy and list files
+cl() {
+ emulate -L zsh
+ cd $1 && ls -a
+}
+#f5# Cvs add
+cvsa() {
+ emulate -L zsh
+ cvs add $* && cvs com -m 'initial checkin' $*
+}
+#f5# Cvs diff
+cvsd() {
+ emulate -L zsh
+ cvs diff -N $* |& $PAGER
+}
+#f5# Cvs log
+cvsl() {
+ emulate -L zsh
+ cvs log $* |& $PAGER
+}
+#f5# Cvs update
+cvsq() {
+ emulate -L zsh
+ cvs -nq update
+}
+#f5# Rcs2log
+cvsr() {
+ emulate -L zsh
+ rcs2log $* | $PAGER
+}
+#f5# Cvs status
+cvss() {
+ emulate -L zsh
+ cvs status -v $*
+}
+#f5# Disassemble source files using gcc and as
+disassemble(){
+ emulate -L zsh
+ gcc -pipe -S -o - -O -g $* | as -aldh -o /dev/null
+}
+#f5# Firefox remote control - open given URL
+fir() {
+ if [ -e /etc/debian_version ]; then
+ firefox -a iceweasel -remote "openURL($1)" || firefox ${1}&
+ else
+ firefox -a firefox -remote "openURL($1)" || firefox ${1}&
+ fi
+}
+# smart cd function, allows switching to /etc when running 'cd /etc/fstab'
+cd() {
+ if (( ${#argv} == 1 )) && [[ -f ${1} ]]; then
+ [[ ! -e ${1:h} ]] && return 1
+ print "Correcting ${1} to ${1:h}"
+ builtin cd ${1:h}
+ else
+ builtin cd "$@"
+ fi
+}
+
+#f5# Create Directoy and \kbd{cd} to it
+mcd() {
+ mkdir -p "$@" && cd "$@"
+}
+#f5# Create temporary directory and \kbd{cd} to it
+cdt() {
+ local t
+ t=$(mktemp -d)
+ echo "$t"
+ builtin cd "$t"
+}
+#f5# Unified diff to timestamped outputfile
+mdiff() {
+ diff -udrP "$1" "$2" > diff.`date "+%Y-%m-%d"`."$1"
+}
+
+#f5# Create directory under cursor or the selected area
+# Press ctrl-xM to create the directory under the cursor or the selected area.
+# To select an area press ctrl-@ or ctrl-space and use the cursor.
+# Use case: you type "mv abc ~/testa/testb/testc/" and remember that the
+# directory does not exist yet -> press ctrl-XM and problem solved
+inplaceMkDirs() {
+ local PATHTOMKDIR
+ if ((REGION_ACTIVE==1)); then
+ local F=$MARK T=$CURSOR
+ if [[ $F -gt $T ]]; then
+ F=${CURSOR}
+ T=${MARK}
+ fi
+ # get marked area from buffer and eliminate whitespace
+ PATHTOMKDIR=${BUFFER[F+1,T]%%[[:space:]]##}
+ PATHTOMKDIR=${PATHTOMKDIR##[[:space:]]##}
+ else
+ local bufwords iword
+ bufwords=(${(z)LBUFFER})
+ iword=${#bufwords}
+ bufwords=(${(z)BUFFER})
+ PATHTOMKDIR="${(Q)bufwords[iword]}"
+ fi
+ [[ -z "${PATHTOMKDIR}" ]] && return 1
+ if [[ -e "${PATHTOMKDIR}" ]]; then
+ zle -M " path already exists, doing nothing"
+ else
+ zle -M "$(mkdir -p -v "${PATHTOMKDIR}")"
+ zle end-of-line
+ fi
+}
+#k# mkdir -p <dir> from string under cursor or marked area
+zle -N inplaceMkDirs && bindkey '^XM' inplaceMkDirs
+
+#f5# Memory overview
+memusage() {
+ ps aux | awk '{if (NR > 1) print $5; if (NR > 2) print "+"} END { print "p" }' | dc
+}
+#f5# Show contents of gzipped tar file
+shtar() {
+ emulate -L zsh
+ gunzip -c $1 | tar -tf - -- | $PAGER
+}
+#f5# Show contents of zip file
+shzip() {
+ emulate -L zsh
+ unzip -l $1 | $PAGER
+}
+#f5# Unified diff
+udiff() {
+ emulate -L zsh
+ diff -urd $* | egrep -v "^Only in |^Binary files "
+}
+#f5# (Mis)use \kbd{vim} as \kbd{less}
+viless() {
+ emulate -L zsh
+ vim --cmd 'let no_plugin_maps = 1' -c "so \$VIMRUNTIME/macros/less.vim" "${@:--}"
+}
+
+# Function Usage: uopen $URL/$file
+#f5# Download a file and display it locally
+uopen() {
+ emulate -L zsh
+ if ! [[ -n "$1" ]] ; then
+ print "Usage: uopen \$URL/\$file">&2
+ return 1
+ else
+ FILE=$1
+ MIME=$(curl --head $FILE | grep Content-Type | cut -d ' ' -f 2 | cut -d\; -f 1)
+ MIME=${MIME%$'\r'}
+ curl $FILE | see ${MIME}:-
+ fi
+}
+
+# Function Usage: doc packagename
+#f5# \kbd{cd} to /usr/share/doc/\textit{package}
+doc() {
+ emulate -L zsh
+ cd /usr/share/doc/$1 && ls
+}
+_doc() { _files -W /usr/share/doc -/ }
+check_com compdef && compdef _doc doc
+
+#f5# Make screenshot
+sshot() {
+ [[ ! -d ~/shots ]] && mkdir ~/shots
+ #cd ~/shots ; sleep 5 ; import -window root -depth 8 -quality 80 `date "+%Y-%m-%d--%H:%M:%S"`.png
+ cd ~/shots ; sleep 5; import -window root shot_`date --iso-8601=m`.jpg
+}
+
+# list images only
+limg() {
+ local -a images
+ images=( *.{jpg,gif,png}(.N) )
+
+ if [[ $#images -eq 0 ]] ; then
+ print "No image files found"
+ else
+ ls "$images[@]"
+ fi
+}
+
+#f5# Create PDF file from source code
+makereadable() {
+ emulate -L zsh
+ output=$1
+ shift
+ a2ps --medium A4dj -E -o $output $*
+ ps2pdf $output
+}
+
+# zsh with perl-regex - use it e.g. via:
+# regcheck '\s\d\.\d{3}\.\d{3} Euro' ' 1.000.000 Euro'
+#f5# Checks whether a regex matches or not.\\&\quad Example: \kbd{regcheck '.\{3\} EUR' '500 EUR'}
+regcheck() {
+ emulate -L zsh
+ zmodload -i zsh/pcre
+ pcre_compile $1 && \
+ pcre_match $2 && echo "regex matches" || echo "regex does not match"
+}
+
+#f5# List files which have been accessed within the last {\it n} days, {\it n} defaults to 1
+accessed() {
+ emulate -L zsh
+ print -l -- *(a-${1:-1})
+}
+
+#f5# List files which have been changed within the last {\it n} days, {\it n} defaults to 1
+changed() {
+ emulate -L zsh
+ print -l -- *(c-${1:-1})
+}
+
+#f5# List files which have been modified within the last {\it n} days, {\it n} defaults to 1
+modified() {
+ emulate -L zsh
+ print -l -- *(m-${1:-1})
+}
+# modified() was named new() in earlier versions, add an alias for backwards compatibility
+check_com new || alias new=modified
+
+#f5# Grep in history
+greph() {
+ emulate -L zsh
+ history 0 | grep $1
+}
+# use colors when GNU grep with color-support
+#a2# Execute \kbd{grep -{}-color=auto}
+(grep --help 2>/dev/null |grep -- --color) >/dev/null && alias grep='grep --color=auto'
+#a2# Execute \kbd{grep -i -{}-color=auto}
+alias GREP='grep -i --color=auto'
+
+#f5# Watch manpages in a stretched style
+man2() { PAGER='dash -c "sed G | /usr/bin/less"' command man "$@" ; }
+
+# usage example: 'lcheck strcpy'
+#f5# Find out which libs define a symbol
+lcheck() {
+ if [[ -n "$1" ]] ; then
+ nm -go /usr/lib/lib*.a 2>/dev/null | grep ":[[:xdigit:]]\{8\} . .*$1"
+ else
+ echo "Usage: lcheck <function>" >&2
+ fi
+}
+
+#f5# Clean up directory - remove well known tempfiles
+purge() {
+ emulate -L zsh
+ setopt HIST_SUBST_PATTERN
+ local -a TEXTEMPFILES GHCTEMPFILES PYTEMPFILES FILES
+ TEXTEMPFILES=(*.tex(N:s/%tex/'(log|toc|aux|nav|snm|out|tex.backup|bbl|blg|bib.backup|vrb|lof|lot|hd|idx)(N)'/))
+ GHCTEMPFILES=(*.(hs|lhs)(N:r:s/%/'.(hi|hc|(p|u|s)_(o|hi))(N)'/))
+ PYTEMPFILES=(*.py(N:s/%py/'(pyc|pyo)(N)'/))
+ LONELY_MOOD_FILES=((*.mood)(.NDe:'local -a AF;AF=( ${${REPLY#.}%mood}(mp3|flac|ogg|asf|wmv|aac)(N) ); [[ -z "$AF" ]]':))
+ ZSH_COMPILED=(*.zwc(.NDe:'[[ -f ${REPLY%.zwc} && ${REPLY%.zwc} -nt ${REPLY} ]]':))
+ FILES=(*~(.N) \#*\#(.N) *.o(.N) a.out(.N) (*.|)core(.N) *.cmo(.N) *.cmi(.N) .*.swp(.N) *.(orig|rej)(.DN) *.dpkg-(old|dist|new)(DN) ._(cfg|mrg)[0-9][0-9][0-9][0-9]_*(N) ${~TEXTEMPFILES} ${~GHCTEMPFILES} ${~PYTEMPFILES} ${LONELY_MOOD_FILES} ${ZSH_COMPILED} )
+ local NBFILES=${#FILES}
+ local CURDIRSUDO=""
+ [[ ! -w ./ ]] && CURDIRSUDO=$SUDO
+ if [[ $NBFILES > 0 ]] ; then
+ print -l $FILES
+ local ans
+ echo -n "Remove these files? [y/n] "
+ read -q ans; echo
+ if [[ $ans == "y" ]] ; then
+ $CURDIRSUDO rm ${FILES}
+ echo ">> $PWD purged, $NBFILES files removed"
+ else
+ echo "Ok. .. then not.."
+ fi
+ fi
+}
+
+#f5# show labels and uuids of disk devices
+if is439 && [[ -d /dev/disk/by-id/ ]]; then
+ lsdisk() {
+ emulate -L zsh
+ setopt extendedglob
+ local -a -U disks
+ local -A mountinfo
+ disks=( /dev/disk/by-id/*(@:A) )
+ [[ -r /proc/mounts ]] && for cline ( "${(f)$(</proc/mounts)[@]}" ) mountinfo["${cline[(w)1]:A}"]="${cline[(w)2,-1]}"
+ for dev in "$disks[@]"; do
+ print ${fg_bold[red]}${dev}${reset_color} /dev/disk/by-label/*(@e/'[[ ${REPLY:A} == $dev ]] && REPLY=${fg[blue]}LABEL=${REPLY:t}${reset_color}'/N) /dev/disk/by-uuid/*(@e/'[[ ${REPLY:A} == $dev ]] && REPLY=${fg[green]}UUID=${REPLY:t}${reset_color}'/N)
+ [[ -n "${mountinfo["$dev"]}" ]] && print -f " Mount: %s -t %s -o %s\n" ${mountinfo["$dev"][(w)1]} ${mountinfo["$dev"][(w)2]} "${mountinfo["$dev"][(w)3,-5]}"
+ for sysdevsize ( /sys/block/${dev:t}/size(N) /sys/block/${${dev:t}%%<->}/${dev:t}/size(N) ) \
+ print -f " Size: %.3f GiB (%d Byte)\n" $(($(<$sysdevsize)/(2.0*1024.0*1024.0))) $(($(<$sysdevsize)*512))
+
+ print -f " Id: %s\n" /dev/disk/by-id/*(@e/'[[ ${REPLY:A} == $dev ]]'/N:t)
+ done
+ }
+fi
+
+#f5# run command or function in a list of directories
+rundirs() {
+ local d CMD STARTDIR=$PWD
+ CMD=$1; shift
+ ( for d ($@) {cd -q $d && { print cd $d; ${(z)CMD} ; cd -q $STARTDIR }} )
+}
+
+# Translate DE<=>EN
+# 'translate' looks up fot a word in a file with language-to-language
+# translations (field separator should be " : "). A typical wordlist looks
+# like at follows:
+# | english-word : german-transmission
+# It's also only possible to translate english to german but not reciprocal.
+# Use the following oneliner to turn back the sort order:
+# $ awk -F ':' '{ print $2" : "$1" "$3 }' \
+# /usr/local/lib/words/en-de.ISO-8859-1.vok > ~/.translate/de-en.ISO-8859-1.vok
+#f5# Translates a word
+trans() {
+ emulate -L zsh
+ case "$1" in
+ -[dD]*)
+ translate -l de-en $2
+ ;;
+ -[eE]*)
+ translate -l en-de $2
+ ;;
+ *)
+ echo "Usage: $0 { -D | -E }"
+ echo " -D == German to English"
+ echo " -E == English to German"
+ esac
+}
+
+#f5# List all occurrences of programm in current PATH
+plap() {
+ emulate -L zsh
+ if [[ $# = 0 ]] ; then
+ echo "Usage: $0 program"
+ echo "Example: $0 zsh"
+ echo "Lists all occurrences of program in the current PATH."
+ else
+ ls -l ${^path}/*$1*(*N)
+ fi
+}
+
+# Found in the mailinglistarchive from Zsh (IIRC ~1996)
+#f5# Select items for specific command(s) from history
+selhist() {
+ emulate -L zsh
+ local TAB=$'\t';
+ (( $# < 1 )) && {
+ echo "Usage: $0 command"
+ return 1
+ };
+ cmd=(${(f)"$(grep -w $1 $HISTFILE | sort | uniq | pr -tn)"})
+ print -l $cmd | less -F
+ echo -n "enter number of desired command [1 - $(( ${#cmd[@]} - 1 ))]: "
+ local answer
+ read answer
+ print -z "${cmd[$answer]#*$TAB}"
+}
+
+# Use vim to convert plaintext to HTML
+#f5# Transform files to html with highlighting
+2html() {
+ emulate -L zsh
+ vim -u NONE -n -c ':syntax on' -c ':so $VIMRUNTIME/syntax/2html.vim' -c ':wqa' $1 &>/dev/null
+}
+
+# Usage: simple-extract <file>
+# Using option -d deletes the original archive file.
+#f5# Smart archive extractor
+simple-extract() {
+ emulate -L zsh
+ setopt extended_glob noclobber
+ local DELETE_ORIGINAL DECOMP_CMD USES_STDIN USES_STDOUT GZTARGET WGET_CMD
+ local RC=0
+ zparseopts -D -E "d=DELETE_ORIGINAL"
+ for ARCHIVE in "${@}"; do
+ case $ARCHIVE in
+ *.(tar.bz2|tbz2|tbz))
+ DECOMP_CMD="tar -xvjf -"
+ USES_STDIN=true
+ USES_STDOUT=false
+ ;;
+ *.(tar.gz|tgz))
+ DECOMP_CMD="tar -xvzf -"
+ USES_STDIN=true
+ USES_STDOUT=false
+ ;;
+ *.(tar.xz|txz|tar.lzma))
+ DECOMP_CMD="tar -xvJf -"
+ USES_STDIN=true
+ USES_STDOUT=false
+ ;;
+ *.tar)
+ DECOMP_CMD="tar -xvf -"
+ USES_STDIN=true
+ USES_STDOUT=false
+ ;;
+ *.rar)
+ DECOMP_CMD="unrar x"
+ USES_STDIN=false
+ USES_STDOUT=false
+ ;;
+ *.lzh)
+ DECOMP_CMD="lha x"
+ USES_STDIN=false
+ USES_STDOUT=false
+ ;;
+ *.7z)
+ DECOMP_CMD="7z x"
+ USES_STDIN=false
+ USES_STDOUT=false
+ ;;
+ *.(zip|jar))
+ DECOMP_CMD="unzip"
+ USES_STDIN=false
+ USES_STDOUT=false
+ ;;
+ *.deb)
+ DECOMP_CMD="ar -x"
+ USES_STDIN=false
+ USES_STDOUT=false
+ ;;
+ *.bz2)
+ DECOMP_CMD="bzip2 -d -c -"
+ USES_STDIN=true
+ USES_STDOUT=true
+ ;;
+ *.(gz|Z))
+ DECOMP_CMD="gzip -d -c -"
+ USES_STDIN=true
+ USES_STDOUT=true
+ ;;
+ *.(xz|lzma))
+ DECOMP_CMD="xz -d -c -"
+ USES_STDIN=true
+ USES_STDOUT=true
+ ;;
+ *)
+ print "ERROR: '$ARCHIVE' has unrecognized archive type." >&2
+ RC=$((RC+1))
+ continue
+ ;;
+ esac
+
+ if ! check_com ${DECOMP_CMD[(w)1]}; then
+ echo "ERROR: ${DECOMP_CMD[(w)1]} not installed." >&2
+ RC=$((RC+2))
+ continue
+ fi
+
+ GZTARGET="${ARCHIVE:t:r}"
+ if [[ -f $ARCHIVE ]] ; then
+
+ print "Extracting '$ARCHIVE' ..."
+ if $USES_STDIN; then
+ if $USES_STDOUT; then
+ ${=DECOMP_CMD} < "$ARCHIVE" > $GZTARGET
+ else
+ ${=DECOMP_CMD} < "$ARCHIVE"
+ fi
+ else
+ if $USES_STDOUT; then
+ ${=DECOMP_CMD} "$ARCHIVE" > $GZTARGET
+ else
+ ${=DECOMP_CMD} "$ARCHIVE"
+ fi
+ fi
+ [[ $? -eq 0 && -n "$DELETE_ORIGINAL" ]] && rm -f "$ARCHIVE"
+
+ elif [[ "$ARCHIVE" == (#s)(https|http|ftp)://* ]] ; then
+ if check_com curl; then
+ WGET_CMD="curl -L -k -s -o -"
+ elif check_com wget; then
+ WGET_CMD="wget -q -O - --no-check-certificate"
+ else
+ print "ERROR: neither wget nor curl is installed" >&2
+ RC=$((RC+4))
+ continue
+ fi
+ print "Downloading and Extracting '$ARCHIVE' ..."
+ if $USES_STDIN; then
+ if $USES_STDOUT; then
+ ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD} > $GZTARGET
+ RC=$((RC+$?))
+ else
+ ${=WGET_CMD} "$ARCHIVE" | ${=DECOMP_CMD}
+ RC=$((RC+$?))
+ fi
+ else
+ if $USES_STDOUT; then
+ ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE") > $GZTARGET
+ else
+ ${=DECOMP_CMD} =(${=WGET_CMD} "$ARCHIVE")
+ fi
+ fi
+
+ else
+ print "ERROR: '$ARCHIVE' is neither a valid file nor a supported URI." >&2
+ RC=$((RC+8))
+ fi
+ done
+ return $RC
+}
+
+__archive_or_uri()
+{
+ _alternative \
+ 'files:Archives:_files -g "*.(#l)(tar.bz2|tbz2|tbz|tar.gz|tgz|tar.xz|txz|tar.lzma|tar|rar|lzh|7z|zip|jar|deb|bz2|gz|Z|xz|lzma)"' \
+ '_urls:Remote Archives:_urls'
+}
+
+_simple_extract()
+{
+ _arguments \
+ '-d[delete original archivefile after extraction]' \
+ '*:Archive Or Uri:__archive_or_uri'
+}
+compdef _simple_extract simple-extract
+alias se=simple-extract
+
+# Usage: smartcompress <file> (<type>)
+#f5# Smart archive creator
+smartcompress() {
+ emulate -L zsh
+ if [[ -n $2 ]] ; then
+ case $2 in
+ tgz | tar.gz) tar -zcvf$1.$2 $1 ;;
+ tbz2 | tar.bz2) tar -jcvf$1.$2 $1 ;;
+ tar.Z) tar -Zcvf$1.$2 $1 ;;
+ tar) tar -cvf$1.$2 $1 ;;
+ gz | gzip) gzip $1 ;;
+ bz2 | bzip2) bzip2 $1 ;;
+ *)
+ echo "Error: $2 is not a valid compression type"
+ ;;
+ esac
+ else
+ smartcompress $1 tar.gz
+ fi
+}
+
+# Usage: show-archive <archive>
+#f5# List an archive's content
+show-archive() {
+ emulate -L zsh
+ if [[ -f $1 ]] ; then
+ case $1 in
+ *.tar.gz) gunzip -c $1 | tar -tf - -- ;;
+ *.tar) tar -tf $1 ;;
+ *.tgz) tar -ztf $1 ;;
+ *.zip) unzip -l $1 ;;
+ *.bz2) bzless $1 ;;
+ *.deb) dpkg-deb --fsys-tarfile $1 | tar -tf - -- ;;
+ *) echo "'$1' Error. Please go away" ;;
+ esac
+ else
+ echo "'$1' is not a valid archive"
+ fi
+}
+
+# It's shameless stolen from <http://www.vim.org/tips/tip.php?tip_id=167>
+#f5# Use \kbd{vim} as your manpage reader
+vman() {
+ emulate -L zsh
+ if (( ${#argv} == 0 )); then
+ printf 'usage: vman <topic>\n'
+ return 1
+ fi
+ man "$@" | col -b | view -c 'set ft=man nomod nolist' -
+}
+
+# function readme() { $PAGER -- (#ia3)readme* }
+#f5# View all README-like files in current directory in pager
+readme() {
+ emulate -L zsh
+ setopt extendedglob
+ local files
+ files=(./(#i)*(read*me|lue*m(in|)ut|lies*mich)*(NDr^/=p%))
+ if (($#files)) ; then
+ $PAGER $files
+ else
+ print 'No README files.'
+ fi
+}
+
+# function ansi-colors()
+#f5# Display ANSI colors
+ansi-colors() {
+ typeset esc="\033[" line1 line2
+ echo " _ _ _40 _ _ _41_ _ _ _42 _ _ 43_ _ _ 44_ _ _45 _ _ _ 46_ _ _ 47_ _ _ 49_ _"
+ for fore in 30 31 32 33 34 35 36 37; do
+ line1="$fore "
+ line2=" "
+ for back in 40 41 42 43 44 45 46 47 49; do
+ line1="${line1}${esc}${back};${fore}m Normal ${esc}0m"
+ line2="${line2}${esc}${back};${fore};1m Bold ${esc}0m"
+ done
+ echo -e "$line1\n$line2"
+ done
+}
+
+#f5# Find all files in \$PATH with setuid bit set
+suidfind() { ls -latg $path | grep '^...s' }
+
+# TODO: So, this is the third incarnation of this function!?
+#f5# Reload given functions
+refunc() {
+ for func in $argv ; do
+ unfunction $func
+ autoload $func
+ done
+}
+compdef _functions refunc
+
+#f5# Set all ulimit parameters to \kbd{unlimited}
+allulimit() {
+ ulimit -c unlimited
+ ulimit -d unlimited
+ ulimit -f unlimited
+ ulimit -l unlimited
+ ulimit -n unlimited
+ ulimit -s unlimited
+ ulimit -t unlimited
+}
+
+# highlight important stuff in diff output, usage example: hg diff | hidiff
+#m# a2 hidiff \kbd{histring} oneliner for diffs
+check_com -c histring && \
+ alias hidiff="histring -fE '^Comparing files .*|^diff .*' | histring -c yellow -fE '^\-.*' | histring -c green -fE '^\+.*'"
+
+#f5# Change the xterm title from within GNU-screen
+xtrename() {
+ emulate -L zsh
+ if [[ $1 != "-f" ]] ; then
+ if [[ -z ${DISPLAY} ]] ; then
+ printf 'xtrename only makes sense in X11.\n'
+ return 1
+ fi
+ else
+ shift
+ fi
+ if [[ -z $1 ]] ; then
+ printf 'usage: xtrename [-f] "title for xterm"\n'
+ printf ' renames the title of xterm from _within_ screen.\n'
+ printf ' also works without screen.\n'
+ printf ' will not work if DISPLAY is unset, use -f to override.\n'
+ return 0
+ fi
+ print -n "\eP\e]0;${1}\C-G\e\\"
+ return 0
+}
+
+# TODO:
+# Rewrite this by either using tinyurl.com's API
+# or using another shortening service to comply with
+# tinyurl.com's policy.
+#
+# Create small urls via http://tinyurl.com using wget(1).
+#function zurl() {
+# emulate -L zsh
+# [[ -z $1 ]] && { print "USAGE: zurl <URL>" ; return 1 }
+#
+# local PN url tiny grabber search result preview
+# PN=$0
+# url=$1
+## Check existence of given URL with the help of ping(1).
+## N.B. ping(1) only works without an eventual given protocol.
+# ping -c 1 ${${url#(ftp|http)://}%%/*} >& /dev/null || \
+# read -q "?Given host ${${url#http://*/}%/*} is not reachable by pinging. Proceed anyway? [y|n] "
+#
+# if (( $? == 0 )) ; then
+## Prepend 'http://' to given URL where necessary for later output.
+# [[ ${url} != http(s|)://* ]] && url='http://'${url}
+# tiny='http://tinyurl.com/create.php?url='
+# if check_com -c wget ; then
+# grabber='wget -O- -o/dev/null'
+# else
+# print "wget is not available, but mandatory for ${PN}. Aborting."
+# fi
+## Looking for i.e.`copy('http://tinyurl.com/7efkze')' in TinyURL's HTML code.
+# search='copy\(?http://tinyurl.com/[[:alnum:]]##*'
+# result=${(M)${${${(f)"$(${=grabber} ${tiny}${url})"}[(fr)${search}*]}//[()\';]/}%%http:*}
+## TinyURL provides the rather new feature preview for more confidence. <http://tinyurl.com/preview.php>
+# preview='http://preview.'${result#http://}
+#
+# printf '%s\n\n' "${PN} - Shrinking long URLs via webservice TinyURL <http://tinyurl.com>."
+# printf '%s\t%s\n\n' 'Given URL:' ${url}
+# printf '%s\t%s\n\t\t%s\n' 'TinyURL:' ${result} ${preview}
+# else
+# return 1
+# fi
+#}
+
+#f2# Find history events by search pattern and list them by date.
+whatwhen() {
+ emulate -L zsh
+ local usage help ident format_l format_s first_char remain first last
+ usage='USAGE: whatwhen [options] <searchstring> <search range>'
+ help='Use `whatwhen -h'\'' for further explanations.'
+ ident=${(l,${#${:-Usage: }},, ,)}
+ format_l="${ident}%s\t\t\t%s\n"
+ format_s="${format_l//(\\t)##/\\t}"
+ # Make the first char of the word to search for case
+ # insensitive; e.g. [aA]
+ first_char=[${(L)1[1]}${(U)1[1]}]
+ remain=${1[2,-1]}
+ # Default search range is `-100'.
+ first=${2:-\-100}
+ # Optional, just used for `<first> <last>' given.
+ last=$3
+ case $1 in
+ ("")
+ printf '%s\n\n' 'ERROR: No search string specified. Aborting.'
+ printf '%s\n%s\n\n' ${usage} ${help} && return 1
+ ;;
+ (-h)
+ printf '%s\n\n' ${usage}
+ print 'OPTIONS:'
+ printf $format_l '-h' 'show help text'
+ print '\f'
+ print 'SEARCH RANGE:'
+ printf $format_l "'0'" 'the whole history,'
+ printf $format_l '-<n>' 'offset to the current history number; (default: -100)'
+ printf $format_s '<[-]first> [<last>]' 'just searching within a give range'
+ printf '\n%s\n' 'EXAMPLES:'
+ printf ${format_l/(\\t)/} 'whatwhen grml' '# Range is set to -100 by default.'
+ printf $format_l 'whatwhen zsh -250'
+ printf $format_l 'whatwhen foo 1 99'
+ ;;
+ (\?)
+ printf '%s\n%s\n\n' ${usage} ${help} && return 1
+ ;;
+ (*)
+ # -l list results on stout rather than invoking $EDITOR.
+ # -i Print dates as in YYYY-MM-DD.
+ # -m Search for a - quoted - pattern within the history.
+ fc -li -m "*${first_char}${remain}*" $first $last
+ ;;
+ esac
+}
+
+# mercurial related stuff
+if check_com -c hg ; then
+ # gnu like diff for mercurial
+ # http://www.selenic.com/mercurial/wiki/index.cgi/TipsAndTricks
+ #f5# GNU like diff for mercurial
+ hgdi() {
+ emulate -L zsh
+ for i in $(hg status -marn "$@") ; diff -ubwd <(hg cat "$i") "$i"
+ }
+
+ # build debian package
+ #a2# Alias for \kbd{hg-buildpackage}
+ alias hbp='hg-buildpackage'
+
+ # execute commands on the versioned patch-queue from the current repos
+ alias mq='hg -R $(readlink -f $(hg root)/.hg/patches)'
+
+ # diffstat for specific version of a mercurial repository
+ # hgstat => display diffstat between last revision and tip
+ # hgstat 1234 => display diffstat between revision 1234 and tip
+ #f5# Diffstat for specific version of a mercurial repos
+ hgstat() {
+ emulate -L zsh
+ [[ -n "$1" ]] && hg diff -r $1 -r tip | diffstat || hg export tip | diffstat
+ }
+
+fi # end of check whether we have the 'hg'-executable
+
+# some useful commands often hard to remember - let's grep for them
+# actually use our zg() function now. :)
+
+# Work around ion/xterm resize bug.
+#if [[ "$SHLVL" -eq 1 ]]; then
+# if check_com -c resize ; then
+# eval `resize </dev/null`
+# fi
+#fi
+
+# enable jackd:
+# /usr/bin/jackd -dalsa -dhw:0 -r48000 -p1024 -n2
+# now play audio file:
+# alsaplayer -o jack foobar.mp3
+
+# send files via netcat
+# on sending side:
+# send() {j=$*; tar cpz ${j/%${!#}/}|nc -w 1 ${!#} 51330;}
+# send dir* $HOST
+# alias receive='nc -vlp 51330 | tar xzvp'
+
+# debian stuff:
+# dh_make -e foo@localhost -f $1
+# dpkg-buildpackage -rfakeroot
+# lintian *.deb
+# dpkg-scanpackages ./ /dev/null | gzip > Packages.gz
+# dpkg-scansources . | gzip > Sources.gz
+# grep-dctrl --field Maintainer $* /var/lib/apt/lists/*
+
+# other stuff:
+# convert -geometry 200x200 -interlace LINE -verbose
+# ldapsearch -x -b "OU=Bedienstete,O=tug" -h ldap.tugraz.at sn=$1
+# ps -ao user,pcpu,start,command
+# gpg --keyserver blackhole.pca.dfn.de --recv-keys
+# xterm -bg black -fg yellow -fn -misc-fixed-medium-r-normal--14-140-75-75-c-90-iso8859-15 -ah
+# nc -vz $1 1-1024 # portscan via netcat
+# wget --mirror --no-parent --convert-links
+# pal -d `date +%d`
+# autoload -U tetris; zle -N tetris; bindkey '...' ; echo "press ... for playing tennis"
+#
+# modify console cursor
+# see http://www.tldp.org/HOWTO/Framebuffer-HOWTO-5.html
+# print $'\e[?96;0;64c'
+
+# grml-small cleanups
+
+# The following is used to remove zsh-config-items that do not work
+# in grml-small by default.
+# If you do not want these adjustments (for whatever reason), set
+# $GRMLSMALL_SPECIFIC to 0 in your .zshrc.pre file (which this configuration
+# sources if it is there).
+
+if (( GRMLSMALL_SPECIFIC > 0 )) && isgrmlsmall ; then
+
+ unset abk[V]
+ unalias 'V' &> /dev/null
+ unfunction vman &> /dev/null
+ unfunction viless &> /dev/null
+ unfunction 2html &> /dev/null
+
+ # manpages are not in grmlsmall
+ unfunction manzsh &> /dev/null
+ unfunction man2 &> /dev/null
+
+fi
+
+zrclocal
+
+## genrefcard.pl settings
+
+### doc strings for external functions from files
+#m# f5 grml-wallpaper() Sets a wallpaper (try completion for possible values)
+
+### example: split functions-search 8,16,24,32
+#@# split functions-search 8
## END OF FILE #################################################################
-# vim:foldmethod=marker expandtab
+# vim:filetype=zsh foldmethod=marker autoindent expandtab shiftwidth=4
+# Local variables:
+# mode: sh
+# End: