# Authors: grml-team (grml.org), (c) Michael Prokop <mika@grml.org>
# Bug-Reports: see http://grml.org/bugs/
# License: This file is licensed under the GPL v2.
-# Latest change: Sam Dez 22 19:17:27 CET 2007 [mika]
+# Latest change: Sun Aug 03 20:23:34 CEST 2008 [mika]
################################################################################
# This file is sourced only for interactive shells. It
# should contain commands to set up aliases, functions,
fi
# }}}
+# {{{ check for version/system
+# check for versions (compatibility reasons)
+is4(){
+ [[ $ZSH_VERSION == <4->* ]] && return 0
+ return 1
+}
+
+is41(){
+ [[ $ZSH_VERSION == 4.<1->* || $ZSH_VERSION == <5->* ]] && return 0
+ return 1
+}
+
+is42(){
+ [[ $ZSH_VERSION == 4.<2->* || $ZSH_VERSION == <5->* ]] && return 0
+ return 1
+}
+
+is43(){
+ [[ $ZSH_VERSION == 4.<3->* || $ZSH_VERSION == <5->* ]] && return 0
+ return 1
+}
+
+#f1# Checks whether or not you're running grml
+isgrml(){
+ [[ -f /etc/grml_version ]] && return 0
+ return 1
+}
+
+#f1# Checks whether or not you're running a grml cd
+isgrmlcd(){
+ [[ -f /etc/grml_cd ]] && return 0
+ return 1
+}
+
+if isgrml ; then
+#f1# Checks whether or not you're running grml-small
+ isgrmlsmall() {
+ [[ ${${${(f)"$(</etc/grml_version)"}%% *}##*-} == 'small' ]] && return 0 ; return 1
+ }
+else
+ isgrmlsmall() { return 1 }
+fi
+
+#f1# are we running within an utf environment?
+isutfenv() {
+ case "$LANG $CHARSET $LANGUAGE" in
+ *utf*) return 0 ;;
+ *UTF*) return 0 ;;
+ *) return 1 ;;
+ esac
+}
+
+# check for user, if not running as root set $SUDO to sudo
+(( EUID != 0 )) && SUDO='sudo' || SUDO=''
+
+# change directory to home on first invocation of zsh
+# important for rungetty -> autologin
+# Thanks go to Bart Schaefer!
+isgrml && checkhome() {
+ if [[ -z "$ALREADY_DID_CD_HOME" ]] ; then
+ export ALREADY_DID_CD_HOME=$HOME
+ cd
+ fi
+}
+
+# check for zsh v3.1.7+
+
+if ! [[ ${ZSH_VERSION} == 3.1.<7->* \
+ || ${ZSH_VERSION} == 3.<2->.<->* \
+ || ${ZSH_VERSION} == <4->.<->* ]] ; then
+
+ printf '-!-\n'
+ printf '-!- In this configuration we try to make use of features, that only\n'
+ printf '-!- require version 3.1.7 of the shell; That way this setup can be\n'
+ printf '-!- used with a wide range of zsh versions, while using fairly\n'
+ printf '-!- advanced features in all supported versions.\n'
+ printf '-!-\n'
+ printf '-!- However, you are running zsh version %s.\n' "$ZSH_VERSION"
+ printf '-!-\n'
+ printf '-!- While this *may* work, it might as well fail.\n'
+ printf '-!- Please consider updating to at least version 3.1.7 of zsh.\n'
+ printf '-!-\n'
+ printf '-!- DO NOT EXPECT THIS TO WORK FLAWLESSLY!\n'
+ printf '-!- If it does today, you'\''ve been lucky.\n'
+ printf '-!-\n'
+ printf '-!- Ye been warned!\n'
+ printf '-!-\n'
+
+ function zstyle() { : }
+fi
+
+# }}}
+
# utility functions {{{
# this function checks if a command exists and returns either true
# or false. This avoids using 'which' and 'whence', which will
return 0
}
+# a "print -l ${(u)foo}"-workaround for pre-4.2.0 shells
+# usage: uprint foo
+# Where foo is the *name* of the parameter you want printed.
+# Note that foo is no typo; $foo would be wrong here!
+if ! is42 ; then
+ uprint () {
+ local -a u
+ local w
+ local parameter=${1}
+
+ if [[ -z ${parameter} ]] ; then
+ printf 'usage: uprint <parameter>\n'
+ return 1
+ fi
+
+ for w in ${(P)parameter} ; do
+ [[ -z ${(M)u:#${w}} ]] && u=( ${u} ${w} )
+ done
+
+ builtin print -l ${u}
+ }
+fi
+
# Check if we can read given files and source those we can.
xsource() {
if (( ${#argv} < 1 )) ; then
return 0
}
-# Remove these functions again, they are of use only in these
-# setup files. This should be called at the end of .zshrc.
-xunfunction() {
- local -a funcs
- funcs=(check_com salias xcat xsource xunfunction)
+# autoload wrapper - use this one instead of autoload directly
+function zrcautoload() {
+ setopt local_options extended_glob
+ local fdir ffile
+ local -i ffound
- for func in $funcs ; do
- [[ -n ${functions[$func]} ]] \
- && unfunction $func
+ ffile=${1}
+ (( found = 0 ))
+ for fdir in ${fpath} ; do
+ [[ -e ${fdir}/${ffile} ]] && (( ffound = 1 ))
done
+
+ (( ffound == 0 )) && return 1
+ if [[ $ZSH_VERSION == 3.1.<6-> || $ZSH_VERSION == <4->* ]] ; then
+ autoload -U ${ffile} || return 1
+ else
+ autoload ${ffile} || return 1
+ fi
return 0
}
+
#}}}
+# Load is-at-least() for more precise version checks {{{
+
+# Note that this test will *always* fail, if the is-at-least
+# function could not be marked for autoloading.
+zrcautoload is-at-least || is-at-least() { return 1 }
+
+# }}}
+
# locale setup {{{
if [[ -z "$LANG" ]] ; then
- xsource "/etc/default/locale"
+ xsource "/etc/default/locale"
fi
export LANG=${LANG:-en_US.iso885915}
unset xof
# }}}
-# {{{ check for version/system
-# check for versions (compatibility reasons)
-if autoload is-at-least && is-at-least 2>/dev/null ; then
- is4() { is-at-least 4 }
- is41() { is-at-least 4.1 }
- is42() { is-at-least 4.2 }
-else
- is4(){
- [[ $ZSH_VERSION == 4.* ]] && return 0
- return 1
- }
- is42(){
- [[ $ZSH_VERSION == 4.<2->* ]] && return 0
- return 1
- }
-fi
-
-#f1# Checks whether or not you're running grml
-isgrml(){
- [[ -f /etc/grml_version ]] && return 0
- return 1
-}
-
-#f1# Checks whether or not you're running a grml cd
-isgrmlcd(){
- [[ -f /etc/grml_cd ]] && return 0
- return 1
-}
-
-if isgrml ; then
-#f1# Checks whether or not you're running grml-small
- isgrmlsmall() {
- [[ ${${${(f)"$(</etc/grml_version)"}%% *}##*-} == 'small' ]] && return 0 ; return 1
- }
-else
- isgrmlsmall() { return 1 }
-fi
-
-#f1# are we running within an utf environment?
-isutfenv() {
- case "$LANG $CHARSET $LANGUAGE" in
- *utf*) return 0 ;;
- *UTF*) return 0 ;;
- *) return 1 ;;
- esac
-}
-
-# check for user, if not running as root set $SUDO to sudo
-(( EUID != 0 )) && SUDO='sudo' || SUDO=''
-
-# change directory to home on first invocation of zsh
-# important for rungetty -> autologin
-# Thanks go to Bart Schaefer!
-isgrml && checkhome() {
- if [[ -z "$ALREADY_DID_CD_HOME" ]] ; then
- export ALREADY_DID_CD_HOME=$HOME
- cd
- fi
-}
-# }}}
-
# {{{ set some variables
if check_com -c vim ; then
#v#
fi
#v#
-(( ${+PAGER} )) || export PAGER="less"
+export PAGER=${PAGER:-less}
#v#
export MAIL=${MAIL:-/var/mail/$USER}
check_com -c dircolors && eval $(dircolors -b)
# set width of man pages to 80 for more convenient reading
-# (( ${+MANWIDTH} )) || export MANWIDTH=80
+# export MANWIDTH=${MANWIDTH:-80}
# Search path for the cd command
# cdpath=(.. ~)
if [[ -n "$BROKEN_COMPLETION_DIR" ]] ; then
print 'Warning: not setting completion directories because broken files have been found.' >&2
else
- [[ -d /etc/zsh/completion.d ]] && fpath+=( /etc/zsh/completion.d )
+ [[ -d /etc/zsh/completion.d ]] && fpath=( $fpath /etc/zsh/completion.d )
if [[ -d /etc/zsh/functions.d ]] ; then
fpath+=( /etc/zsh/functions.d )
for func in /etc/zsh/functions.d/[^_]*[^~] ; do
- autoload -U ${func:t}
+ zrcautoload -U ${func:t}
done
fi
fi
bindkey '\e[4~' end-of-line # end
bindkey '\e[A' up-line-or-search # cursor up
bindkey '\e[B' down-line-or-search # <ESC>-
-bindkey '^x' history-beginning-search-backward # alternative ways of searching the shell history
+
+bindkey '^xp' history-beginning-search-backward
+bindkey '^xP' history-beginning-search-forward
# bindkey -s '^L' "|less\n" # ctrl-L pipes to less
# bindkey -s '^B' " &\n" # ctrl-B runs it in the background
# if terminal type is set to 'rxvt':
# insert unicode character
# usage example: 'ctrl-x i' 00A7 'ctrl-x i' will give you an ยง
# See for example http://unicode.org/charts/ for unicode characters code
-autoload insert-unicode-char
+zrcautoload insert-unicode-char
zle -N insert-unicode-char
#k# Insert Unicode character
bindkey '^Xi' insert-unicode-char
# bindkey . rationalise-dot
# bindkey '\eq' push-line-or-edit
+
+## toggle the ,. abbreviation feature on/off
+# NOABBREVIATION: default abbreviation-state
+# 0 - enabled (default)
+# 1 - disabled
+NOABBREVIATION=${NOABBREVIATION:-0}
+
+grml_toggle_abbrev() {
+ if (( ${NOABBREVIATION} > 0 )) ; then
+ NOABBREVIATION=0
+ else
+ NOABBREVIATION=1
+ fi
+}
+
+zle -N grml_toggle_abbrev
+bindkey '^xA' grml_toggle_abbrev
+
# }}}
# a generic accept-line wrapper {{{
globalias() {
local MATCH
+
+ if (( NOABBREVIATION > 0 )) ; then
+ LBUFFER="${LBUFFER},."
+ return 0
+ fi
+
matched_chars='[.-|_a-zA-Z0-9]#'
LBUFFER=${LBUFFER%%(#m)[.-|_a-zA-Z0-9]#}
LBUFFER+=${abk[$MATCH]:-$MATCH}
# }}}
# {{{ autoloading
-autoload -U zmv # who needs mmv or rename?
-autoload history-search-end
+zrcautoload zmv # who needs mmv or rename?
+zrcautoload history-search-end
# we don't want to quote/espace URLs on our own...
# if autoload -U url-quote-magic ; then
#m# k ESC-h Call \kbd{run-help} for the 1st word on the command line
alias run-help >&/dev/null && unalias run-help
-autoload run-help # use via 'esc-h'
+zrcautoload run-help # use via 'esc-h'
# completion system
-if autoload -U compinit && compinit 2>/dev/null ; then
+if zrcautoload compinit && compinit 2>/dev/null ; then
compinit 2>/dev/null || print 'Notice: no compinit available :('
else
print 'Notice: no compinit available :('
function compdef { }
fi
-is4 && autoload -U zed # use ZLE editor to edit a file or function
+is4 && zrcautoload zed # use ZLE editor to edit a file or function
is4 && \
for mod in complist deltochar mathfunc ; do
unset tmpargs
fi
-if is4 && autoload -U insert-files && zle -N insert-files ; then
+if is4 && zrcautoload insert-files && zle -N insert-files ; then
#k# Insert files
bindkey "^Xf" insert-files # C-x-f
fi
bindkey '\ei' menu-complete # menu completion via esc-i
# press esc-e for editing command line in $EDITOR or $VISUAL
-if is4 && autoload -U edit-command-line && zle -N edit-command-line ; then
+if is4 && zrcautoload edit-command-line && zle -N edit-command-line ; then
#k# Edit the current line in \kbd{\$EDITOR}
bindkey '\ee' edit-command-line
fi
bindkey "\em" insert-last-typed-word
# set command prediction from history, see 'man 1 zshcontrib'
-# is4 && autoload -U predict-on && \
+# is4 && zrcautoload predict-on && \
# zle -N predict-on && \
# zle -N predict-off && \
# bindkey "^X^Z" predict-on && \
# grep word *~(*.gz|*.bz|*.bz2|*.zip|*.Z) ->
# -> searches for word not in compressed files
# don't forget to quote '^', '~' and '#'!
+setopt longlistjobs # display PID when suspending processes as well
setopt notify # report the status of backgrounds jobs immediately
setopt hash_list_all # Whenever a command completion is attempted, make sure \
# the entire command path is hashed first.
# dirstack handling {{{
-DIRSTACKSIZE=20
-if [[ -f ~/.zdirs ]] && [[ ${#dirstack[*]} -eq 0 ]] ; then
- dirstack=( ${(f)"$(< ~/.zdirs)"} )
+DIRSTACKSIZE=${DIRSTACKSIZE:-20}
+DIRSTACKFILE=${DIRSTACKFILE:-${HOME}/.zdirs}
+
+if [[ -f ${DIRSTACKFILE} ]] && [[ ${#dirstack[*]} -eq 0 ]] ; then
+ dirstack=( ${(f)"$(< $DIRSTACKFILE)"} )
# "cd -" won't work after login by just setting $OLDPWD, so
[[ -d $dirstack[0] ]] && cd $dirstack[0] && cd $OLDPWD
fi
chpwd() {
- builtin print -l ${(u)dirstack} >! ~/.zdirs
+ if is42 ; then
+ builtin print -l ${(u)dirstack} >! ${DIRSTACKFILE}
+ else
+ uprint dirstack >! ${DIRSTACKFILE}
+ fi
}
# }}}
# }}}
# {{{ set prompt
-if autoload promptinit && promptinit 2>/dev/null ; then
+if zrcautoload promptinit && promptinit 2>/dev/null ; then
promptinit # people should be able to use their favourite prompt
else
print 'Notice: no promptinit available :('
}
# set colors
-if autoload colors && colors 2>/dev/null ; then
+if zrcautoload colors && colors 2>/dev/null ; then
BLUE="%{${fg[blue]}%}"
RED="%{${fg_bold[red]}%}"
GREEN="%{${fg[green]}%}"
fi
}
- isgrmlcd && alias su="sudo -s" # get a root shell
+ # get a root shell as normal user in live-cd mode:
+ if isgrmlcd && [[ $UID -ne 0 ]] ; then
+ alias su="sudo su"
+ fi
+
#a1# Take a look at the syslog: \kbd{\$PAGER /var/log/syslog}
alias llog="$PAGER /var/log/syslog" # take a look at the syslog
#a1# Take a look at the syslog: \kbd{tail -f /var/log/syslog}
# {{{ Use hard limits, except for a smaller stack and no core dumps
unlimit
-limit stack 8192
+is4 && limit stack 8192
isgrmlcd && limit core 0 # important for a live-cd-system
limit -s
# }}}
# Ignore completion functions for commands you don't have:
zstyle ':completion::(^approximate*):*:functions' ignored-patterns '_*'
+ # Provide more processes in completion of programs like killall:
+ zstyle ':completion:*:processes-names' command 'ps c -u ${USER} -o command | uniq'
+
# complete manual by their section
zstyle ':completion:*:manuals' separate-sections true
zstyle ':completion:*:manuals.*' insert-sections true
#m# f6 Stop() \kbd{/etc/init.d/\em{process}}\quad\kbd{stop}
#m# f6 Reload() \kbd{/etc/init.d/\em{process}}\quad\kbd{reload}
#m# f6 Force-Reload() \kbd{/etc/init.d/\em{process}}\quad\kbd{force-reload}
-if [[ -d /etc/init.d ]] ; then
+if [[ -d /etc/init.d || -d /etc/service ]] ; then
+ __start_stop() {
+ local action_="${1:l}" # e.g Start/Stop/Restart
+ local service_="$2"
+ local param_="$3"
+
+ local service_target_="$(readlink /etc/init.d/$service_)"
+ if [[ $service_target_ == "/usr/bin/sv" ]]; then
+ # runit
+ case "${action_}" in
+ start) if [[ ! -e /etc/service/$service_ ]]; then
+ $SUDO ln -s "/etc/sv/$service_" "/etc/service/"
+ else
+ $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
+ fi ;;
+ # there is no reload in runits sysv emulation
+ reload) $SUDO "/etc/init.d/$service_" "force-reload" "$param_" ;;
+ *) $SUDO "/etc/init.d/$service_" "${action_}" "$param_" ;;
+ esac
+ else
+ # sysvinit
+ $SUDO "/etc/init.d/$service_" "${action_}" "$param_"
+ fi
+ }
+
for i in Start Restart Stop Force-Reload Reload ; do
- eval "$i() { $SUDO /etc/init.d/\$1 ${i:l} \$2 ; }"
+ eval "$i() { __start_stop $i \"\$1\" \"\$2\" ; }"
done
fi
# source another config file if present {{{
xsource "/etc/zsh/zshrc.local"
+xsource "${HOME}/.zshenv"
# }}}
# "persistent history" {{{