.\" This file was generated with po4a. Translate the source file.
.\"
.\"*******************************************************************
-.TH LIVE\-BOOT 7 26.10.2010 2.0.9 "Debian Live Projekt"
+.TH LIVE\-BOOT 7 04.11.2011 3.0~a22\-1 "Debian Live Projekt"
.SH NAME
\fBlive\-boot\fP \- System Boot Skripte
.SH KONFIGURATION
\fBlive\-boot\fP kann durch Boot Parameter oder durch Konfigurationsdateien
konfiguriert werden.
+.PP
+To configure the live\-boot parameters used by default in a live image, see
+the \-\-bootappend\-live option in the \fIlb_config\fP(1) manual page.
.SS "Kernel Parameter"
\fBlive\-boot\fP ist nur dann aktiv, wenn 'boot=live' als Kernel Parameter
If specified, an MD5 sum is calculated on the live media during boot and
compared to the value found in md5sum.txt found in the root directory of the
live media.
-.IP "\fBip\fP=[\fICLIENT_IP\fP]:[\fISERVER_IP\fP]:[\fIGATEWAY_IP\fP]:[\fINETMASK\fP]:[\fIHOSTNAME\fP]:[\fIDEVICE\fP]:[\fIAUTOCONF\fP] [,[\fICLIENT_IP\fP]:[\fISERVER_IP\fP]:[\fIGATEWAY_IP\fP]:[\fINETMASK\fP]:[\fIHOSTNAME\fP]:[\fIDEVICE\fP]:[\fIAUTOCONF\fP]]" 4
+.IP "\fBip\fP=[\fIDEVICE\fP]:[\fICLIENT_IP\fP]:[\fISERVER_IP\fP]:[\fIGATEWAY_IP\fP]:[\fINETMASK\fP]:[\fIHOSTNAME\fP]:[\fIAUTOCONF\fP] [,[\fIDEVICE\fP]:[\fICLIENT_IP\fP]:[\fISERVER_IP\fP]:[\fIGATEWAY_IP\fP]:[\fINETMASK\fP]:[\fIHOSTNAME\fP]:[\fIAUTOCONF\fP]]" 4
Let you specify the name(s) and the options of the interface(s) that should
be configured at boot time. Do not specify this if you want to use dhcp
(default). It will be changed in a future release to mimick official kernel
has been installed with persistent enabled.
.IP \fBnoprompt\fP 4
Do not prompt to eject the CD or remove the USB flash drive on reboot.
+.IP \fBnoprompt\fP=\fITYPE\fP 4
+This tells live\-boot not to prompt to eject the CD (when noprompt=cd) or
+remove the USB flash drive (when noprompt=usb) on reboot.
+.IP \fBramdisk\-size\fP 4
+This parameters allows to set a custom ramdisk size (it's the '\-o size'
+option of tmpfs mount). By default, there is no ramdisk size set, so the
+default of mount applies (currently 50% of available RAM). Note that this
+option has no currently no effect when booting with toram.
.IP \fBswapon\fP 4
This parameter enables usage of local swap partitions.
.IP \fBpersistent\fP[={nofiles|cryptsetup}] 4
If "cryptsetup" is specified, filesystems stored on Luks\-encrypted devices
will be considered as well as others when searching for a persistence
filesystem; the user will be prompted for any needed decryption passphrase.
+.IP \fBpersistent\-media\fP={\fIremovable\fP|\fIremovable\-usb\fP} 4
+If you specify the keyword 'removable', live\-boot will try to find
+persistent and snapshot partitions on removable media only. Note that if you
+want to further restrict the media to usb mass storage only, you can use the
+\&'removable\-usb' keyword.
.IP \fBpersistent\-path\fP=\fIPATH\fP 4
live\-boot will look for persistency files in the root directory of a
partition, with this parameter, the path can be configured so that you can
\fIlive\-build\fP(7)
.PP
\fIlive\-config\fP(7)
+.PP
+\fIlive\-tools\fP(7)
.SH HOMEPAGE
Weitere Informationen ueber live\-boot und das Debian Live Projekt koennen